1200

---

50

100

460

Series

Side View

480

Wall Hung

300

490

55

55 60

600 460

50 25

50

Inspire Series 50

100

180

55

Slick 750

50 25

100

50

Slick 900

750 Side View

A highly versatile wall hung vanity available in four sizes, Slick is a great choice if 60 consistency throughout the home’s bathrooms is sought. Finger-pull handles keep 600 the look clean and uncluttered, as does the white top in600 easy-care polymarble with integrated basin. Cabinet doors open to reveal extensive storage with additional 50 50 100 space provided in two100large drawers (excluding 600mm).

900

375

490

130

55

750 530

900MM 50

600

750

460

Door 300

1200MM

50

100

600750 SLICK SLICK

130 Drawer50 300 25 60

205

750 750

530

Door 300 490

Drawer 300

530 530

50

Door 450

Side View

Drawer 300

375 490

490

55

215

60

530

SLICVAN9

I/N 0116719

I/N 0116720

Door 300 Drawer SLICVAN12 300

I/N 0116721 750

50

900

60

Drawer 300

Drawer 300

50 25

325

460

460

530 Door Door 450 300

50 25

450

300

25 205 Drawer 400

490 50 180

1200

25

100

180

375 130

205 100

60

900 300 490

215

1200 SLICK

Drawer 1200 300

Drawer SLICVAN7 300

750

550

215

I/N 0116717

325

300 Door 400

455

SLICVAN6

600 Door 400

Drawer 300 455

900 900

Door 450

25 205 Drawer50 300 25

Drawer 400

50

215

490

100

180

750900 SLICK SLICK

215

205

300

530 530

460 530 460

Door 300

Drawer 300

490

600

50 25 215

450

100

1200

50

300

300

60

490

130

55 60

750

CIBO DESIGN – WHO ARE WE?

1200MM*

325 50 25

60

100

60

460

750460

460

550 50 180

130

50 100

900

60

1200 SLICK

215

215 25

600

300

325 900MM*

750 SLICK Door 300

55

55

205

490

180 375

600

600

50 25

180

750

180

600

900 SLICK

50

300

300

205

100 60

Drawer 300

100

450

130

50

100

180 300

130

180

900

50

180 * Drawers RHS only

25

455

Door 300

Door Side 300 View

Door 300 205 50 25

50 25 60

900 Door 300

300

455

Door 300

450

750MM*

Drawer 300

60

600

W 600 / 750 / 900 / 1200 50 100 x D 460 x H 530mm

50 25

215

490

1200

180

Drawer 300 300

600MM*

100

55

130

DIMENSIONS:

325 60

50

455

530 460

100

455

530

50 25

60

460

300 550

325

215

180 375 Door 450

130

100

600

900 SLICK

50

900

600

205

460

50

600 SLICK

460

300 490

205

215

Drawer 400

450

750 SLICK

Finger-pull handles on doors/drawers Soft-close doors Standard drawer runners

Side View

180

480

215

460

180

25

MECHANISMS:

60

130 60

750

Established in 1994 on Sydney’s northern beaches, CIBO Design has built a solid reputation180 for its 600 collection of high quality Australian325 550 designed bathroomware. 50 50 100 100 Specialising in producing innovative 180 180 1200 bathroom storage solutions, CIBO’s 375 450 300 300 products combine contemporary 490 130 205 205 490 design and quality craftsmanship 60 60 with practicality. 750 900 460

50 25

Drawer 300

455

Door 300

55

130 50 25

60

60

600 600

Drawer 300

Door 300 450

Side View

Must be installed by a Licensed Plumber 120mm allowance behind drawer for hot/cold pipework 50 Screw fix though the rear of 100 180 the cabinet, washers must be 375 300 used to avoid the screw pulling 130 490 through the carcass 50 100 60 Ensure top and sides of unit are 180 750 silicon sealed 300 Detailed installation instructions 490 55 over page

460

480

460

530 460

490

600 SLICK

50 25

60

100

455

455

Door 300 300

55

50 180

180 Door 300

205

490

INSTALLATION TIPS:

460

100

750

300

205

750MM

50 25

60 50

450

750 SLICK

Three (3) years (see warranty 600 information over page)

50mm high, 460mm deep polymarble top with integrated centred basin 50 100 1 only Tap hole options: 180 Includes 40mm plug and waste 300 without overflow 490 55 Tapware sold separately

460

215

600MM

130

460

490

55 60

Exterior: white gloss Interior: white moisture resistant melamine

460

130

480

600 SLICK

WARRANTY:

TOP/BASIN:

50

460

SET-OUT FOR375LICENSED PLUMBER: 300

50

25

460

300 490

55

CABINET FINISH:

180

530

215

460

180

50

50 25

480

460

460

Door 300 55

460

530

Door 300 300

490

100

180

455

460

180

55

Drawer 400

130 60

50

460 460

600

490

460 460

50

60

480

300

130

480

490

375 600 SLICK

50

460

460

300 55

Side View

100

180

455

rawer 300

r

Inspire Series

50

Slick Vanity 600 / 750 / 900 / 1200 Inspire 180

rawer 300

r

Inspire Series

Inspire Series

130

50

100

300

60

Installation Instructions for Licensed installer (plumber/builder)

Slick Delivery/Pick-up & Installation If an item is damaged or imperfect when opened, do not proceed with installation. If a defective item is installed, CIBO is not liable for removal of the item, nor will CIBO accept responsibility to repair or replace the product. CIBO bathroomware should only be installed by a licensed plumber.

Returns & Exchanges Please retain your receipt and contact the ‘Returns and Exchanges’ Desk at the Bunnings store where you purchased the item.

1. Kick should fit snugly with the floor and may require trimming with an electric planer if floor is not entirely level. Packers may also be required to ensure cabinet is level from left to right as well as front to back. Seal around kick with bathroom quality silicone to avoid water gaining access from floor and/or walls. IT IS THE RESPONSIBILITY OF THE INSTALLER TO ADJUST THE DOOR(S) AFTER INSTALLATION.

2. Under no circumstances should vanities and/or tops be tiled into the wall. CIBO vanities and basin/tops must be fitted to finished/completed wall coverings e.g., tile, masonry or other cladding method deemed acceptable, as per the building code (of Australia) 2013. The CIBO Warranty does not cover any vanity and/or top and/or basin that has been tiled ‘into’ a wall i.e., fitting or fixing a vanity to a wall and tiling around it, and/or tiling down and/or around the vanity and top/basin.

Warranty This product is covered by a three (3) year replacement product warranty. Products which are within 3 years from the date of purchase, found upon inspection by an authorised representative to be defective will be repaired or exchanged with an equivalent product free of charge. Replaced items become CIBO Design’s property. All replacement products will be available for collection without charge to the customer at the nearest Bunnings store to the customer’s location, or elsewhere as agreed with the customer. Warranty for Labour and Spare Parts – One (1) Year The labour for the replacement of products and spare parts to which this warranty applies will be supplied by CIBO Design if the warranty claim is made within one (1) year from the date of purchase.

Drawer Removal

Product Care & Maintenance

1. Carefully remove drawer(s) and door(s) (see Drawer & Door Removal instructions) and cover runners before installation, to avoid damage. If top has not been fixed to vanity, remove it from vanity. 2. Using a hole saw, drill holes for water supply pipes, wastes etc. 3. Carefully move cabinet into place. Pack vanity to required height ensuring vanity top is level from side to side and front to back. Packers may be required behind the unit to ensure top is level and to prevent unit from twisting. 4. Once vanity is level, fasten it to the wall using washers around the appropriate fixings ie. screws, bolts (not supplied). It is the installers responsibility to determine what fixing materials are needed. Fixings should be made as high as possible on unit.

(before vanity installation)

We advise that it is the responsibility of the purchaser to ensure the product is installed and maintained appropriately. All materials used are of high quality and care must be taken when cleaning.

Top Washer

Non-soft closing drawers can be simply removed by pulling out fully and lifting.

Door Removal/Replacement (responsibility of the installer) During installation, it is advisable to remove door(s) from cabinet. To do this, unclip all hinges on each door.

Polymarble Best practice is to clean polymarble with a small amount of warm water and a ‘Micro’ cloth. When finished, wipe dry with ‘Micro’ cloth. Never use caustic chemicals, razor blades, putty knives or abrasive pads as they may damage the surface. Cabinets The most effective cleaning method is to use a damp cotton cloth and a mild detergent. Never use an ammonia-based product or any kind of abrasive cleaning product.

Wall Back

IMPORTANT NOTES: Vanities with Kicks

Vanity Unit Installation

Timber Studs

5. Sweep debris from interior of unit. 6. Now replace top ensuring front and

To Remove Doors Locate button at back of top hinge and press. Hold base of door and pull forward to disengage top hinge. Repeat with bottom hinge. 1

ends of top line up with front and ends of unit. This may leave gaps between top and wall. Fix top to vanity with silicone.

7. The unit must be sealed (along the back edge of top and down the sides) against the wall with bathroom quality silicone. The best method of applying silicone is to cut the appropriate sized tip at a 65° angle and to evenly run a bead around the unit ensuring all gaps are filled. Seal around the cabinet with silicone.

Door Hinge Adjustment1 (responsibility of the installer) A

To Replace Doors Line up hinges with corresponding hinge plates. At base of hinge is a small metal rod that must be lined up with cradle arms of hinge-plate.

8. Spray soapy water on the silicone

A

B

A. This screw moves the hinge left or right. B Clockwise direction = moves the hinge left Anticlockwise direction = moves the hinge right. (The opposite occurs when the hinge is fitted the other way around)

A

9. Pipes can now be connected.

Spare parts which are within one (1) year from the date of purchase and found upon inspection by an authorised a CIBO Design representative to be defective in construction, material or assembly, will be replaced free of charge. Products found to be faulty more than one (1) year from the date of purchase will be replaced free of charge by CIBO Design. After one (1) year from date of purchase, labour and spare parts costs are the responsibility of the customer. Warranty Conditions This warranty will apply only under all of the following conditions: • The item has been installed by a licensed plumber; • This item has been installed for and subjected to domestic residential use only; • Failure is due to the manufacture of the product; • Proof of purchase (including date

1

1. There are two primary screws that can be adjusted to align the door.

joint (between the wall and top) to stop silicone sticking to wall, then wipe off excess silicone and soapy water.

DAMAGE MAY OCCUR IF THE PRODUCTS ARE CONSTANTLY EXPOSED TO WATER. SILICONE MUST BE USED TO SEAL ALL JOINS – TOPS, CABINET SIDES AND KICKBOARDS MUST BE SEALED TO PREVENT WATER PENETRATION.

Locate the hinges of the door to be adjusted. It may be necessary to adjust all hinges in order to achieve correct alignment.

Once hinge is in place, push back of hinge down towards the hinge-plate. Hinge will snap down and engage.

of purchase) is provided; • The installation of the product is in accordance with the instructions provided This warranty does not include faults caused by: • Unsuitable or improper use; • Incorrect installation or installation not in accordance with the instructions provided; • Installation or part installation by the purchaser or any person other than a Licensed Plumber; • Normal wear and tear including water* and natural causes such as sunlight, humidity and other environmental conditions or factors; • Inadequate or complete lack of maintenance; • Chemical, electrochemical or electrical influences; • Harsh detergents or abrasive cleaners used on product finishes *Important note: CIBO Design vanity cabinets are manufactured from Moisture Resistant (MR) materials but are not waterproof. Care must be

B. This screw moves the hinge in or out. Clockwise direction = moves the hinge towards the vanity Anticlockwise direction = moves the hinge away from the vanity

B

taken to dry spillages or leakage of water that may gain access to cabinetry. Accurate sealing of the vanity cabinet and kickboard (where applicable) is vital for proper maintenance of the product and ensuring longevity. Exclusions - To the fullest extent permitted by law, CIBO Design excludes all liability for damage or injury to any person, damage to any property, and any indirect consequential or other loss or damage. Warranty Claim Procedure - Please retain your receipt and contact the ‘Returns and Exchanges’ Desk at the Bunnings store where you purchased the product. Warranty claims can also be sent to: CIBO Design, After Sales Service PO Box 7461, Warringah Mall, Brookvale NSW 2100 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation

for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the customer given by this CIBO Design warranty are in addition to any other rights and remedies available to the customer as a consumer under any laws that relate to the goods covered by this CIBO Design warranty. CIBO Design Pty Ltd 1/130 Old Pittwater Road Brookvale NSW Australia Postal: PO Box 7461, Warringah Mall, Brookvale NSW 2100 Tel: (02) 9939 4434 Email: [email protected]