1.4 LED Wall Pack


Fortified LEDs FL/AWM35/50/1.4 LED Wall Pack...

4 downloads 161 Views 194KB Size

Wiring Instructions

fortified

Leds™

WARNING: Be certain power is removed from power source before beginning wiring procedure. Fixture Without Light Sensor 1. Wire Fixture to Power Source a. Connect Black wire from power source (line) to Black wire from LED driver using wire nut. b. Connect White wire from power source (neutral) to White wire from driver using wire nut. c. Connect Green wire from power source (ground) to the fixture housing using an appropriately sized screw (not provided).

No Light Sensor

Fixture Housing

LED Driver

Black (Line)

Black

Power

White (Neutral)

White

Source

Green (Ground)

120-277 VAC

Red "+" Blue "-"

to LEDs

Green

= Wire Nut

= Screw

Fixture With Light Sensor

1. Wire Light Sensor to Driver a. Connect Red wire from light sensor to Black wire of driver using wire-nut. b. Connect White wire from light sensor to White wire of driver.

2. Wire Fixture to Power Source a. Connect Black wire from power source (line) to Black wire from light sensor using wire nut. b. Connect White wire from power source (neutral) to two White wires (1 from driver and 1 from light sensor connected in step 1b above) using wire nut c. Connect Green wire from power source (ground) to the fixture housing using an appropriately sized screw (not provided).

With Light Sensor Fixture Housing

Light Sensor

120-277 VAC

Black (Line)

Power

White (Neutral)

Source

Green (Ground)

Black

LED Driver

Red

White

Black White

Red "+" Blue "-"

to LEDs

Green

= Wire Nut

= Screw

3401 Avenue D, Arlington, TX 76011 • 800-375-6355 ©2016 Revised 10/24/2016

1