ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH AU: 1800 029 701 N Z: 0800 466 444
[email protected] www.abscosheds.com.au
Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m
TE SLAB
CONCRE
23
4580mm
60 mm
16
RETE
CONC
20
mm
SLAB
m
2360m
WHEN LAYING YOUR CONCRETE
For construction in non-cyclonic areas SLAB, ENSURE THERE IS A EDGE 25mm DEEP Wind rating: N2 as per REBATED AS4055-2012 AROUND THE PERIMETER
REBATED EDGE E
ET
CR
N CO
100mm
When laying concrete slab,HELP ensure THIS WILL WATER there EGRESS FROM THE BASE OF THE SHED is a rebated edge 25mm deep around the perimeter. This will help water egress from the base of the shed.
BOTTOM CHANNEL
75mm WIDE REBATE CONCRETE SLAB
We thank you for choosing an Australian made shed. For further assistance please visit our detailed instructional video library at MANU FA CT URED Http://www.abscosheds.com.au/watch-videos
Download the Absco Sheds Assembly App At ABSCO Industries we are always looking to be number ONE, so please let us know what you think for instructional videos of our instructions. Feedback makes us better.
IN A US TR ALIA
[email protected]
SNAPTiTE Assemb ly
ABSCO INDUSTRIES
Absco Industries
ASSEMBLY INSTRUCTION MANUAL
Assembly Instruction Manual
SHED MODEL: 23151GK
Model: 45232WK
27/09/2018
21-11-2017
PAGE 01
1.30
1
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST" pages. • Local authority approval must be obtained prior to construction of the shed. Once you have selected your site you will need to lodge a site plan to your local council. SITE PREPARATION • The site for the shed must be level. An uneven surface may result in misalignment of parts. • The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately illustrated on “FINAL CONSTRUCTION” page. If using a rebated slab ensure that all frame uprights are trimmed 25mm.
10mm drill bit metal/masonry
3mm drill bit
TOOLS REQUIRED
SAFETY NOTES • Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended. • Do not erect your shed in windy conditions. • It is highly recommended to erect the shed with two or more people. RECOMMENDED
Absco Industries
Assembly Instruction Manual
Model: 45232WK
27/09/2018
1.30
2
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
COMPONENT PACKING LIST Check off all components. MAIN PACK CARTON (PACK 1 OF 2) QTY
COMPONENT DESCRIPTION
2
STEEL SHEET 1915mm X 773mm
PART No.
CHECK QTY
36L
COMPONENT DESCRIPTION RIDGE BEAM
1
PART No.
CHECK
97AL
L = 1521mm
2
STEEL SHEET 1980mm X 773mm
42D
RIDGE BEAM
1
97AR
L = 1521mm
12
STEEL SHEET 1170mm X 773mm
49A
RIDGE BEAM
1
97C
L = 1513mm
1
STEEL SHEET 1785mm X 711mm
34A
1
1
STEEL SHEET 1785mm X 711mm
35A
2
1
STEEL SHEET 1725mm X 773mm
A
1
1
STEEL SHEET 1725mm X 773mm
B
Absco Industries
Assembly Instruction Manual
RIDGE BEAM JOINER L: 450mm (17.7")
PEAK BRACE
ZARSP
15A
FITTINGS & ACCESSORIES PACKET (SEE PAGE 4)
Model: 45232WK
27/09/2018
1.30
3
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
COMPONENT PACKING LIST FITTINGS & ACCESSORIES PACKET CONTENTS
2
DOOR STRAP L: 165mm
12A
10
2
CAP GABLE L: 170mm
14A
2
1
SELF TAPPING SCREWS PACKET CONTAINING 100
1
1
PSTKDBL DOUBLE DOOR FITTING PACK
10
CHANNEL JOINER L= 200mm (7.9") RIDGE PLATES RIDGE CAP JOINER 16mm TEK SCREWS
CSJ RBP 98A FAST014
PSTKDBL - DOUBLE DOOR FITTINGS PACK
3 1 1
DOOR PADBOLT 3mm DRILL BIT
FAST006
2
DRILL
1
SELF TAPPING SCREWS PACKET CONTAINING 220
DOOR PADBOLT HASP
FAST007
PHILLIPS DRIVER BIT
1
FAST038
PACK12P SCREW PACK 12
PACK12P - SCREW PACK 12
8
3/16 ROUND HEAD BOLTS & NYLOCK NUTS
12
3/16 COUNTERSUNK SCREWS & NUTS
Absco Industries
Assembly Instruction Manual
12
Model: 45232WK
3.2 x 8mm BLIND POP RIVETS
27/09/2018
1.30
4
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
COMPONENT PACKING LIST MAIN PACK CARTON (PACK 2 OF 2) COMPONENT DESCRIPTION
QTY
3
STEEL SHEET 1785mm X 773mm
2
40
STEEL SHEET 1915mm X 773mm
2
40
2
PART No.
CHECK QTY
36R 30A
C1106
80
CHANNEL L = 1106mm
COMPONENT DESCRIPTION
5
STEEL SHEET 1785mm X 773mm
1
45232WCP-(J) CHANNELPACK (SEE PGs 6 & 7)
1
MID-FRAME FITTINGS PACK (SEE BELOW)
PART No.
CHECK
31A
C1704
80
CHANNEL L = 1704mm
MID-FRAME ACCESSORIES
2 2 2
Absco Industries
KNEE PLATE
APEX PLATE
MULTI PURPOSE BRACKET
Assembly Instruction Manual
4 120 26
Model: 45232WK
DYNABOLT
16mm TEK SCREWS
45mm TEK SCREWS
27/09/2018
1.30
5
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
COMPONENT PACKING LIST 45232WCP CHANNEL PACK QTY
1 1 1 2 2 1 2
COMPONENT DESCRIPTION
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1126.5mm
Absco Industries
PART No.
CHECK QTY
55AL
1
55BL
1
55CL
1
60AL
2
81AL
2
81BL
1
81CL
2
Assembly Instruction Manual
COMPONENT DESCRIPTION
CHANNEL L = 1463.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1126.5mm
Model: 45232WK
27/09/2018
PART No.
CHECK
55AR
55BR 55CR 60AR 81AR 81BR 81CR
1.30
6
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
COMPONENT PACKING LIST 45232WCP CHANNEL PACK (CONT.) QTY
2 1 1 4 2 1 2 2
COMPONENT DESCRIPTION
CHANNEL WITH HINGES L = 1725mm
CHANNEL L = 1725mm
CHANNEL L = 1513mm
CHANNEL L = 773mm
CHANNEL L = 1513mm
CHANNEL L = 1568mm
CHANNEL L = 1513mm
CHANNEL L = 1513mm
Absco Industries
PART No.
CHECK QTY
58A
2
58B
2
53C
2
58C
1
60C 79A 81E
1 4 4
COMPONENT DESCRIPTION
PART No.
CHECK
83L
CHANNEL L = 1143mm
83R
CHANNEL L = 1143mm
JAMB L= 1785mm
89A 89C
JAMB L= 1725mm
90A JAMB L= 1568mm
91A JAMB L= 1120mm
LIP TRIM L= 1170mm
86A
81F
Assembly Instruction Manual
Model: 45232WK
27/09/2018
1.30
7
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off from the side.
Channel locks the shed panel into position without the need for screws!
FASTENING SYMBOLS SNAP T iTE
Secure channel to sheeting by SNAPTiTE fastening method. Join components together with one screw at this location only, as some channels have extra holes that are not required for this model of shed. Do not join components together at this location yet, as the screws may obstruct further assembly of the other components.
Absco Industries
Assembly Instruction Manual
D
Join components together by pre-drilling the holes first. Use one component as template to mark where the holes are and drill with a 3mm drill bit. 3mm pop rivet 4mm nut and bolt set.
Model: 45232WK
27/09/2018
1.30
8
ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH
Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other
=
=
=
=
CSJ
=
JOIN>>
JOIN>>
JO
IN
Step 2. Join the first channel to the CSJ by inserting the centre of the CSJ, on an angle, to the end of the channel where the JOIN>> text is marked.
JOIN>> =
Step 3. Join the second channel to the CSJ by positioning the
SJ
J
=