3 Foot Stainless Steel Grab Bar Technical Bulletin No

---

3 Foot Stainless Steel Grab Bar

Technical Bulletin

No.

4C

Page 1 of 2

4A.1 Parts List a. 3 Foot Stainless Steel Grab Bar Hardware Kit (5) stainless steel phillips head counter sunk self taping 2” screws (1) #21 drill bit (1) #2 phillips head bit

b. additional materials (supplied by EPI) (1) 3 foot stainless steel grab bar c. Tools Required (supplied by others) Drill

4A.2 Description This 3 foot stainless steel grab bar can be installed anywhere around the interior of the pool to assist the customer in entering and exiting the pool. It also allows for a wider range of physical activities in the pool. The grab bar can be installed in the edge of the Endless Pool® Synthetic Coping Option, the Endless Pool Aluminum Coping Option, and the edge of alternate coping systems provided by others. This is not recommended for installation in the Endless Pools Bullnose Coping Option. Please keep in mind that Endless Pools can not ensure the integrity of coping systems that we do not provide, or install.

4A.3 Installation Instructions 1) Align the square grab bar flange with coping edge. See diagrams for installation into the optional synthetic coping or the optional aluminum coping. Mark the center of the holes with a pencil. Remove the grab bar and pre-drill the holes using the #21 drill bit provided (see note). Align the grab bar with the predrilled holes. Using the #2 phillips head bit and screws provided, secure the grab bar into the edge of the coping material. (Note: The drill bit and screws provided are for the optional synthetic coping system and optional aluminum coping system kits, available through Endless Pools. Other bits, hardware or tools may be necessary for the coping material you may have chosen.)

Endless Pools Inc.

11/25/2005

3 Foot Stainless Steel Grab Bar

Technical Bulletin

No.

4C

Page 2 of 2

Endless Pools Inc.

11/25/2005