A Conversion


[PDF]TIP550 8 (4) Channels of Isolated 12 bit D/A Conversion - Rackcdn.comc1170156.r56.cf3.rackcdn.com/UK_TEW_TIP550-10_DS.pdfCachedWindows XP/XPE/200...

3 downloads 166 Views 201KB Size

The Embedded I/O Company

TIP550 8 (4) Channels of Isolated 12 bit D/A Conversion Application Information

Technical Information

The TIP550 is an IndustryPack® compatible module and provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converter.

     

Each TIP550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP.



Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) channels of isolated 12 bit analog output Full-scale output range +/-10 V or 0-10V selectable by jumper Factory calibrated, calibration information in Identification-PROM unique to each IP Operating temperature -40°C to +85°C

Order Information RoHS Compliant TIP550-10R 8 Channels of Isolated 12 bit Analog Output TIP550-11R 4 Channels of Isolated 12 bit Analog Output None RoHS Compliant TIP550-10 None RoHS compliant version of TIP550-10R TIP550-11 None RoHS compliant version of TIP550-11R For First-Time-Buyers the Engineering Documentation TIP550-ED is recommended. The Engineering Documentation includes TIP550-DOC, schematics and data sheets. Software Support (TIP550-SW-xx) for different operating systems is available.

Documentation TIP550-DOC User Manual TIP550-ED Engineering Documentation, includes TIP550-DOC Software TIP550-SW-25 TIP550-SW-42

TIP550-SW-65 TIP550-SW-72 TIP550-SW-82 TIP550-SW-95

Integrity Software Support VxWorks Software Support (Legacy and VxBus-Enabled Software Support) Windows XP/XPE/2000 Software Support LynxOS Software Support LiNUX Software Support QNX 6 Software Support

For other operating systems please contact TEWS.

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

10/2009