[PDF]Accessories Lockout Caps, Insulation Stops and Fixing...
0 downloads
146 Views
145KB Size
Accessories Lockout Caps, Insulation Stops and Fixing Elements MCS MIDI
6
473
Lockout caps
Insulation stops
Fixing elements
for male and female connectors equipped with CAGE CLAMP®
for male and female connectors equipped with CAGE CLAMP® or Push-in CAGE CLAMP®
for angled male headers with solder pins
Color
Item No.
Pack. Unit
Lockout cap
Color
Conductor Size
Item No.
Pack. Unit
Insulation stop, 5/5.08 mm pin spacing
gray
231-668
500 (5 x 100)
orange
231-669
500 (5 x 100)
white
0.08 … 0.2 mm2 “sol.” 231-670 0.08 … 0.14 mm2 “f-st”
200
light gray dark gray
0.25 … 0.5 mm2 0.75 … 1 mm2
231-671 231-672
200 200
Pack. Unit
gray
231-193
100
orange
231-393
100
6
Screws for fixing elements
white
0.08 … 0.2 mm2 “sol.” 231-673 0.08 … 0.14 mm2 “f-st”
200
Screw with nut M 2 x 12
231-195
100
light gray dark gray
0.25 … 0.5 mm2 0.75 … 1 mm2
231-674 231-675
200 200
Tapping screw B 2.2 x 13 231-194 Drilled hole, 1.8 mm Ø
100
Wiring of PLC and microprocessor control systems also employs small or very small fine-stranded conductors. The buckling strength of these conductors is so low that they can bend in the clamp when they come into contact with the stop, meaning the insulation can penetrate into the clamping unit be clamped with the conductor. This is possible with all of the clamping systems currently on the market and results in time-consuming troubleshooting. Insulation stop for connectors reliably ensure proper termination. Insulation stops automatically bundle the cores of finestranded conductors when inserted into the clamping unit, preventing splaying. This also limits the conductor entry to a defined cross sectional area — ensuring the actual conductor, not the insulation, will enter the clamping unit. Insulation stops are available as dividable 5-pole strips for MCS MIDI male and female connectors. Insulation stop usage will not affect the conductor strip lengths for the aforementioned connectors.
10.16 mm pin spacing available upon request.
Item No.
Fixing element
Insulation stop, 7.5/7.62 mm pin spacing
Sealing unnecessary clamping points in CAGE CLAMP®equipped male and female connectors (e.g., when doubling the pin spacing to meet clearance and creepage distance requirements, or when higher rated voltage is required). Lockout pins are not suitable for panel-mount, angled female connectors.
Color
Insulation stops are not suitable for panel-mounted female connectors.
Fixing elements enhance connection reliability between male headers with angled solder pins and the PCB. This substantially reduces mechanical stress on both solder pins and joints, particularly when dealing with small lengths and frequent mating cycles.
