[PDF]APPLICATIONShttps://www.soundpro.com/catalog/documents/MXA150_app.pdfCachedAPPLICATIONS input. 1 input. 2 channel 1 min max peak channel 2 peak t...
13 downloads
138 Views
81KB Size
APPLICATIONS
House of Worship Sound Reinforcement System
MXA150 MXA150 CAUTION: Risk of fire replace fuse only with same type
UL 60065
channel 6
mute/chime
BIAMP SYSTEMS
remote level control
Music On Hold output
Music On Hold level min
max
C +10V
EQ in
pre out
link off low cut off
on off on
channel 5
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
peak
channel 4
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
peak
channel 3
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
peak
channel 2
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
peak
channel 1
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
on on on on -20dB
phantom pwr priority auto mute manual mute -80dB
peak
peak
link min
min
max
chime level
min
max
trim
auto mute sensitivity
line out amp in
min
max
trim min
max
trim min
max
trim min
max
trim min
trim
max
min
max
~ 120/240VAC
120V
FUSE
FUSE
O
limiter threshold
max
mic/line
50-60Hz 300W
FUSE: T 8A/4A L 250V 120V/240V
class 3 wiring
100V
70V
25V
com
class 2 wiring
xfmr input
4Ω
gnd
input 6
input 5
input 4
input 3
input 2
choir mic
choir mic
wireless mic
lectern mic
tel
input 1
auxiliary mixer tape deck
two 8Ω speaker cabinets (4Ω load)
pulpit mic
This application shows a MXA150 being used in a house of worship sound reinforcement system. Channels #1~5 are set for input from the various microphones. Channel #6 is set for input from the tape deck (playback), which is also connected to Pre Out of the MXA150 (recording). If additional inputs are required, an auxiliary mixer (such as a Biamp 601) may be connected to EQ In on the MXA150. Two 8 ohm speaker cabinets are connected (in parallel) to the MXA150 4 ohm (direct) output.
1-1app.doc