ARCHITECTURAL event lighting diffusers


[PDF]ARCHITECTURAL event lighting diffusers - Rackcdn.com426bb82d2999c9147474-eae010336623170ce70309697bb6e591.r89.cf3.rackcdn.co...

0 downloads 103 Views 103KB Size

ARCHITECTURAL event lighting diffusers

Texas State Capitol

Celine Dion Concert

Eiffel Tower

Location Lighting using Luminit Light Shaping Diffusers® Do you need to set a mood, flood a wall, brighten a hallway, illuminate a concert or light up the Eiffel Tower? The solution to any lighting project is the Luminit Light Shaping Diffuser® (LSD) product family. The conventional design of lighting systems is changing from larger extended sources to smaller discrete ones due to the increased availability of cost effective high-output LED sources. These new designs require diffusers capable of delivering uniformity and directionality at high transmission rates. Mixing the emissions of multiple sources is an added benefit the LSD can provide. Luminit has the LSD to make your design unsurpassed with diffuser angles ranging 0.5 degrees to 95 degrees in circular or elliptical profiles, as well as a large assortment of specialty products. The Luminit LSD product family will improve your designs, whether they are for general lighting or custom applications.

Features Transmission efficiency: 85-92% dependent on angle and wavelength 88-92% over visible spectrum (typical) Transmission wavelength: 400-1500nm for standard polyester, polycarbonate and acrylic

Transmission Efficiency Chart

LSD Seamless Film and Sheets

LSD Sheet Options

LSD Film Options Angle FWHM 75ºx45º 60ºx10º 30ºx4º 55º 30º 20º 10º 5º 1ºx60º 0.2ºx40º

Angle FWHM

Substrate & Thickness

Size

Polycarbonate P1 - 0.010”

16” x 16” 20” x 20”

Polyester E5 - 0.005”

Roll Width 20” Option Protective Film

90ºx60º 95ºx25º 75ºx45º 60ºx10º 60ºx1º 40ºx0.2º 30ºx5º 80º 60º 40º 30º 20º 10º 5º 1º

Substrate & Thickness Polycarbonate P1 - 0.010” P8 - 0.118”

Polyester E5 - 0.005”

Size 16” x 16” 20” x 20”

Option Protective Film

Lighting Applications: • UV Stable Polycarbonate is available for outdoor applications • UL listed polycarbonate substrates are available • Temperature Range: polyester and polycarbonate: -30°C to 80°C acrylic: -40°C to 80°C • Humidity: Cycled at 95% for 24 hours

Note that the specifications contained herein are subject to change without notice.

For more information, email [email protected] 1850 W. 205th Street Torrance, California 90501 Tel: 310.320.1066 Fax: 310.320.8067 [email protected]

www.LuminitCo.com 05.25.12