ASTM Publications - ACS Publications


ASTM Publications - ACS Publicationspubs.acs.org/doi/pdf/10.1021/ac60371a781PREPAID at the price shown and by. SD Cat. N...

3 downloads 192 Views 131KB Size

Books of Organic Chemistry Series and its companion, Techniques of Inorganic Chemistry, embraces techniques applicable to all branches of chemistry. This volume, written by 11 authors, concentrates on interpretation of solutions and solubilities on a molecular level. The areas specifically excluded from the discussion of this wide-ranging subject are electrochemistry, photochemistry in solution, the electron in solution, and molten salts. Each of the eight chapters contains extensive theoretical background material on its subject, as well as a review of the most recent experimental procedures. Chelates in Analytical Chemistry, Vol. 5. H. A. Flaschka and A. J. Barnard, Jr., Eds. xiii + 328 pages. Marcel Dekker, Inc., 270 Madison Ave., New York, N.Y. 10016. 1976. $36.50

This fifth volume of the series on the application of chelation and chelating agents to analytical chemistry presents some chelating agents of analytical importance not discussed previously. Specifically, the two chapters of equal length cover EDTA and other aminopolycarboxylic acids as chromo-

genic agents and aromatic ortho-dihydroxy compounds as reagents for inorganic analysis. The first chapter is written by Francisco Bermejo-Martinez of Spain, and the latter by B. W. Budesinsky and Keith E. Curtis. It is a good quality photo-offset copy of typewritten text.

dynamic headspace sampling of volatile hydrocarbon components of the sample followed by coupled-column liquid chromatography for nonvolatile components. Volatile components are separated from the matrix on a closed system and concentrated on a TENAX-GC packed precolumn for GC/GC-MS analysis.

U.S. Government Publications

Directory of United States Standardization Activities. SD Cat. No. C13.10: 417. Sophie J. Chumas, Ed. 228 pages. 1975. $6.75

Copies of the following are available PREPAID at the price shown and by SD Cat. No. from Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402. Foreign remittances must be in U.S. exchange and should include an additional 25% of the publication price to cover mailing costs.

This directory (SP-417) is a guide to standardization activities in the United States. It supersedes a directory of the same title, issued in 1967, as National Bureau of Standards Miscellaneous Publication 288. Included in the directory are summaries of the standardization activities of trade associations, technical and other professional societies representing industry and commerce, and federal and state governments.

Trace Hydrocarbon Analysis: The National Bureau of Standards Prince William Sound/Northeastern Gulf of Alaska Baseline Study. SD Cat. No. C13.46:889. S. N. Chesler et al. 73 pages. 1976. $18.90

The analytical method presented in this publication was developed by the National Oceanic and Atmospheric Administration (6010 Executive Blvd., Rockville, Md. 20852) and NBS for

Measure Moisture? AQUATEST II Insert sample · Flip switch · Read answer

ASTM Publications The following are available from the American Society for Testing and Materials, 1916 Race St., Philadelphia, Pa. 19103 (USA, Canada, and Mexico add 3% shipping charges. Other countries add 5 %.) Correlating Sensory Objective Measurements—New Methods for Answering Old Problems. Special Technical Publication 594. Soft cover. 134 pages. 1976. $13

This book reviews developments in the state-of-the-art, which have taken place since 1967, for those who must devise or adapt different methods for the solution of sensory-objective problems. It includes a chapter on a typical case study, as well as chapters on various aspects of sensory or objective analyses themselves and especially on the means of deriving useful correlations between the two types of measurements. Surface Analysis Techniques for Metallurgical Applications. Special Technical Publication 596. Soft cover. 146 pages. 1976. $15

For demonstration in your laboratory No obligation

Toll-free 800-221-5182 From New York State, call collect (212) 989-0484 PHOTOVOLT CIRCLE 171 ON READER SERVICE CARD 606 A · ANALYTICAL CHEMISTRY, VOL. 48, NO. 7, JUNE 1976

Presented in this publication are four surface analysis techniques that have been shown to be applicable to many types of metallurgical problems that are dependent upon surface composition. The techniques dealt with are: (1) ion scattering spectroscopy, (2) Auger electron spectroscopy, (3) electron spectroscopy for chemical analysis (also known as x-ray-induced electron spectroscopy), and (4) ion microprobe mass analysis/secondary ion mass spectroscopy.