billet aluminum hood pull


[PDF]billet aluminum hood pull - Rackcdn.combd8ba3c866c8cbc330ab-7b26c6f3e01bf511d4da3315c66902d6.r6.cf1.rackcdn.com/...

0 downloads 252 Views 572KB Size

BILLET ALUMINUM HOOD PULL For VW MKIV Golf & Jetta

Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

For this installation, we will use: • • • • •

Small needlenose pliers ¼” tip flat head screwdriver 90° pick (Small flat head screwdriver would work) Mechanics’ wire Dental floss

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

1

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 1

With the hood of the car open, locate the detent clip on the end of the factory hood pull. Now, with your 90° pick, pull up on the forward-facing edge of the clip until it pops upward. It will be removed in our next step.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

2

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 2

Insert the flat head screwdriver in between the prongs of your factory hood pull, and gently twist sideways so as to spread the prongs around the pin holding it in place. Our method of choice is to open it just enough to get one side off the pin at a time. Once the pin is removed, remove factory hood pull by pulling it straight out.

*When you remove the drivers’ side prong, the detent clip from step 1 will be free. Once the prongs are removed from both sides of the pin, the pin will be free to come out of the latch mechanism. Caution should be taken in order to keep from losing these pieces.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

3

R

Factory Hood Pull

ECS Hood Pull

Retaining Pin

Cotter Pin

Detent Clip

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

ES#2748122 ES#2748053

VW MKIV Billet Aluminum Hood Pull

Clevis Pin

1.800.924.5172

www.ecstuning.com

4

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 3

Insert the ECS Tuning Hood Pull and align the holes with the hole on the latch mechanism.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

5

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 4

Thread a small length of dental floss through the clevis pin. At the end of the dental floss, tie a short piece of mechanics’ wire.

*We tied dental floss to mechanic’s wire to make it easier to thread it through the holes of the ECS Tuning Hood Pull and the locking mechanism.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

6

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 5

Feed the mechanics wire and dental floss through the holes in the ECS Tuning Hood Pull and the latch mechanism. Then pull the pin through the holes.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

7

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

STEP 6

Using needlenose pliers, pick up the reusable cotter pin (hairpin) and insert it through the hole on the clevis pin that the dental floss is currently threaded through, then remove dental floss.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

8

R

VW MKIV Billet Aluminum Hood Pull

ES#2748122 ES#2748053

Your install is now complete. Enjoy your new ECS Billet Aluminum Hood Pull.

This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.

ECS Tuning 1000 Seville Rd. Wadsworth, OH 44281

1.800.924.5172

www.ecstuning.com

Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.

9