BRITA Vivreau Vi Dispenser


[PDF]BRITA Vivreau Vi Dispenser - Rackcdn.comhttps://2ecffd01e1ab3e9383f0-07db7b9624bbdf022e3b5395236d5cf8.ssl.cf4.rackcd...

0 downloads 180 Views 583KB Size



BRITA Vivreau Vi Dispenser Vi-2 Specifications BRITA Vivreau Vi-2 dispenser …. the latest innovation from BRITA Vivreau. Dispenses Chilled Still and Sparkling water from a single tap. BRITA Vivreau has set the standard with the new advanced BRITA dispenser. Designed specifically with water drinkers in mind, delivering unparalleled throughput of filtered water at ice cold temperature particularly at peak demand times. Features  New improved modern designed dispense tap  Fits into a 600mm cupboard  High performance Ice Bank refrigeration system delivering 80 litres of ice cold water per hour  Touch control dispense  Designed to fill water bottles without the need for font extension  Perfect water flow with zero splash  Plumbed to waste flush fitting drip tray  Waste container with auto cut-off and alarm if waste provisions not available  Removable dispense nozzle for improved hygiene  Designed and manufactured in the U.K. and Europe  Power saving option to reduce electricity consumption  Anti-flood detection as standard  Also available as floor-standing option with steel base cabinet  BRITA filter fitted as standard Product dispensed Filtered Chilled Still and Sparkling water Application Designed typically to be installed within existing cupboard units for staff refreshments.

3504-4

Equipment dimensions Due to the fact that the equipment is installed in component part form, there are varying configurations for installation. As a guideline, a cupboard to the following dimensions will be sufficient: • Width: 600mm • Depth: 600mm • Height: 800mm BRITA Water Filter Systems Distributors Pty Ltd    ABN 33 058 740 757

Level 9, 123 Epping Road North Ryde NSW 2113  AUSTRALIA

P.O. Box 4066 Macquarie Centre  NSW  2113 AUSTRALIA

Phone:  Aus: +61 2 9486 4240                  NZ: +64 21 342 942 Email:   [email protected]

Page 1 of 5



Vi-2 Specifications Dispense Taps (drilling templates available upon request) Dimensions height 350mm plus additional 100mm clearance for operation Please note: that this system is installed as an under-counter unit. Alternatively it can be installed as a floor-standing unit or as part of a LinkLine system. Installation specification Installation must be done in accordance with AS/NZS 3500.1 and AS/NZS 3500.2 Within the plant cupboard the following services will be required:  1 x mains water supply terminating in a 15mm shut off valve (to connect to a 15mm compression fitting)  Minimum water pressure 3.5 bar  Minimum water flow 300 litres per hour  1 x 10 amp electrical socket 220/240V AC 50hz  Electrical run current 6 amps  Energy: 565W (max), 3.15 amps (max), power consumed during sleep mode (24 hours) 1.2Kwh, energy consumed for 12 hours operation 7.2Kwh, energy consumed for 1 hour operation 0.3Kwh  2 x vents (upper & lower) each equal to 140cm2 of air flow (see attached guidelines) If drip tray is to be plumbed to waste, we will require a trapped up stand to facilitate a ½'' flexible pipe. Location of services Please ensure all services are kept within the rear 100mm of the system location. Electrical socket is to be located in base cupboard unit at high level in either left or right corner (not beneath dispense tap). Water shut-off valve to be located at low level. Please ensure that there is sufficient room for a 150mm long fitting to be connected to the shut-off valve. Top of waste up stand should be a maximum of 300mm from the base of the unit. Insulation Please ensure that all water pipes located in the BRITA Vivreau plant cupboard are correctly insulated to ensure that the water does not heat up within the pipes prior to entering the BRITA Vivreau system. This is essential for water quality reasons. Floor standing The BRITA Vivreau Vi-2 dispenser can be installed into a metal floor-standing unit and is free standing in your desired location.

3504-4

For more information on the BRITA Vivreau Vi-2 dispenser, please call the numbers below.

BRITA Water Filter Systems Distributors Pty Ltd    ABN 33 058 740 757

Level 9, 123 Epping Road North Ryde NSW 2113  AUSTRALIA

P.O. Box 4066 Macquarie Centre  NSW  2113 AUSTRALIA

Phone:  Aus: +61 2 9486 4240                  NZ: +64 21 342 942 Email:   [email protected]

Page 2 of 5



BRITA Vivreau Vi Dispenser

3504-4

Vi-2 Specifications

BRITA Water Filter Systems Distributors Pty Ltd    ABN 33 058 740 757

Level 9, 123 Epping Road North Ryde NSW 2113  AUSTRALIA

P.O. Box 4066 Macquarie Centre  NSW  2113 AUSTRALIA

Phone:  Aus: +61 2 9486 4240                  NZ: +64 21 342 942 Email:   [email protected]

Page 3 of 5



BRITA Vivreau Vi Dispenser

3504-4

Installation dimensions worktop cut-out

BRITA Water Filter Systems Distributors Pty Ltd    ABN 33 058 740 757

Level 9, 123 Epping Road North Ryde NSW 2113  AUSTRALIA

P.O. Box 4066 Macquarie Centre  NSW  2113 AUSTRALIA

Phone:  Aus: +61 2 9486 4240                  NZ: +64 21 342 942 Email:   [email protected]

Page 4 of 5



BRITA Vivreau Vi Dispenser

3504-4

Methods of cabinet ventilation

BRITA Water Filter Systems Distributors Pty Ltd    ABN 33 058 740 757

Level 9, 123 Epping Road North Ryde NSW 2113  AUSTRALIA

P.O. Box 4066 Macquarie Centre  NSW  2113 AUSTRALIA

Phone:  Aus: +61 2 9486 4240                  NZ: +64 21 342 942 Email:   [email protected]

Page 5 of 5