caution

---

Installation points Focus ST Exhaust system 2363-CBE-AA

•

The factory exhaust is a 1 piece system and will need to be cut above the rear axle for removal.

•

Focus models sold in North American have a removable transportation brace that cannot be used with the mountune exhaust system. Do not attempt to reinstall this bracket after the mountune exhaust system is in place.

CAUTION !!!! • •

•

Position the mountune exhaust system to clear the underbody heat shields and rear bumper. Failure to do so may result in body damage. Pay special attention to exhaust system tip position to prevent body damage from high heat. There must be at least 20-25mm clearance between the top of the tip and the bumper. Torque exhaust system clamps to 16.0 lb/ft

mountune, LLC 11215 Young River Ave, Fountain Valley Ca. 92708 USA