Deck Mount Fastlane Winterization Advisory

---

Deck Mount Fastlane Winterization Advisory Page 1 of 1

Recommended method: 1) 2) 3) 4)

Leave the Fastlane unit in the pool Turn off the circuit breaker to the power unit * Winterize the pool as it is typically done Cover/protect the power unit

Alternate winterization technique if the Fastlane unit is in the way of a winter cover being placed on the pool: 1) Turn off the circuit breaker to the power unit * 2) Disconnect and remove the Fastlane from the pool 3) Use appropriate hydraulic fittings to cap the submersible hoses and plug the run hoses (fittings available for purchase from Endless Pools Customer Service) 4) Cover/protect the power unit * Unless the power unit shares the electrical circuit with another piece of equipment that requires power during the winter. In this case: 1) 2) 3) 4)

Leave the circuit breaker “on” Disconnect the float level switch cord (square BLACK plug on top of the power unit’s reservoir) Protect the cord end and the top of the float level switch to guard against water damage Take care not to lose the gasket

Endless Pools Inc.

1/20/2010