ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH AU: 1800 029 701 N Z: 0800 466 444
[email protected] www.abscosheds.com.au
Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m
TE SLAB
CONCRE
31 00
16
mm
4580mm
20
mm
RETE
CONC
SLAB
m
2360m
WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm DEEP AROUND THE PERIMETER
BOTTOM CHANNEL REBATED EDGE TE
RE
NC
CO
100mm
THIS WILL HELP WATER EGRESS FROM THE BASE OF THE SHED
75mm WIDE REBATE CONCRETE SLAB
For construction in non-cyclonic areas
We thank you for choosing an Australian made When laying concrete slab, ensure there shed. For further assistance please visit our detailed Wind rating: N2 as per AS4055-2012. is a rebated edge 25mm deep around instructional video library at If you require a higher wind ratingHttp://www.abscosheds.com.au/watch-videos please contact the perimeter. This will help water egress us:
[email protected] or 1800 029 701 the base of the shed. At ABSCO Industries we are always looking tofrom be number ONE, so please let us know what you think of our instructions. Feedback makes us better.
[email protected]
MANU FA CT URED IN A US TR ALIA
ABSCO INDUSTRIES
Download the Absco Sheds Assembly App for instructional videos ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: 23151GK
21-11-2017
PAGE 01
SNAPTiTE Assemb ly
Absco Industries
Assembly Instruction Manual
Model: 3045UTK
14/09/2018
1.1
1
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH GENERAL INSTRUCTIONS •
Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details.
•
Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST" pages.
•
Local authority approval must be obtained prior to construction of the shed. Once you have selected your site you will need to lodge a site plan to your local council.
SITE PREPARATION •
The site for the shed must be level. An uneven surface may result in misalignment of parts.
•
The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately illustrated on “FINAL CONSTRUCTION” page. If using a rebated slab ensure that all frame uprights are trimmed 25mm. TOOLS REQUIRED
SAFETY NOTES •
Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended.
•
Do not erect your shed in windy conditions.
•
It is highly recommended to erect the shed with two or more people. RECOMMENDED
Absco Industries
Assembly Instruction Manual
Model: 3045UTK
14/09/2018
1.1
2
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST Check off all components. MAIN PACK CARTON (PACK 1 OF 3) QTY
COMPONENT DESCRIPTION
PART No.
CHECK QTY
COMPONENT DESCRIPTION
PART No.
1
STEEL SHEET 1915mm X 773mm
36L
2
STEEL SHEET 1725mm X 711mm
37A
1
STEEL SHEET 2045mm X 773mm
38L
1
STEEL SHEET 1785mm X 731mm
32A
12
STEEL SHEET 1546mm X 773mm
45A
1
STEEL SHEET 1785mm X 731mm
33A
2
STEEL SHEET 1725mm X 773mm
25A
2
STEEL SHEET 1785mm X 329mm
39B
1
STEEL SHEET 1725mm X 773mm
B
1
RIDGE BEAM
2
97BL
PEAK BRACE GABLE R/H L=1475mm
1
CHECK
15A 16R
L = 1152mm RIDGE BEAM
2
97BR
1
GABLE L/H L=1475mm
16L
L = 1152mm
1
FITTINGS & ACCESSORIES PACKET (SEE PG 5)
Absco Industries
Assembly Instruction Manual
2
RIDGE BEAM JOINER L: 450mm (17.7")
Model: 3045UTK
14/09/2018
ZARSP
1.1
3
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST FITTINGS & ACCESSORIES PACKET CONTENTS QTY
3 2 1 1 20
COMPONENT DESCRIPTION
CHECK QTY
DOOR STRAP L: 165mm
12A
18
CAP GABLE L: 170mm
14A
3
RIDGE CAP JOINER
98A
4
PSTKDBL DOUBLE DOOR FITTINGS PACK
1
PSTKSGL SINGLE DOOR FITTINGS PACK
1
ASSEMBLY INSTRUCTION MANUAL
WAFER TEK SCREW CL3 10-16x16mm
FAST014
COMPONENT DESCRIPTION
PART No.
PART No.
CHANNEL JOINER L= 200mm (7.9") RIDGE PLATES
CHECK
CSJ RBP
JAMB L= 75mm
93B
PSTKDBL - DOUBLE DOOR FITTINGS PACK
3
PADBOLT 115mm LONG
1 1
FAST006
2
8G x 3/8 SELF TAPPING SCREWS x 220
PACK220
1
3mm DRILL BIT
DRILL
1
PADBOLT HASP SCREW PACK 12 PHILLIPS HEAD DRIVER BIT S2 PH2
FAST007
PACK12P
FAST038
PACK12P - SCREW PACK 12
12
SBS43E POP RIVET
FAST009
12
3/16" x 1/2" COUNTERSUNK SCREW & NUT
8
3/16 x 1/2 PAN HEAD SCREW
FAST002
8
3/16 NYLOCK NUT
FAST004 FAST005 FAST003
PSTKSGL - SINGLE DOOR FITTINGS PACK
1
PADBOLT 115mm LONG
FAST006
1
PADBOLT HASP
FAST007
1
8G x 3/8 SELF TAPPING SCREWS x 220
PACK220
1
SCREW PACK 6
PACK6P
3mm DRILL BIT
DRILL
1
1
PHILLIPS HEAD DRIVER BIT S2 PH2
FAST038
PACK6P - SCREW PACK 6
6 Absco Industries
SBS43E POP RIVET
FAST009
Assembly Instruction Manual
6 Model: 3045UTK
3/16" x 1/2" COUNTERSUNK SCREW & NUT
14/09/2018
FAST004 FAST005
1.1
4
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST MAIN PACK CARTON (PACK 2 OF 3) COMPONENT DESCRIPTION
QTY
PART No.
COMPONENT DESCRIPTION
CHECK QTY
1
STEEL SHEET 1915mm X 773mm
36R
6
1
STEEL SHEET 2045mm X 773mm
38R
1
PORTAL PACK (SEE BELOW)
3
STEEL SHEET 1785mm X 773mm
30A
1
3045UTK CHANNEL SET (SEE PGs 7&8)
STEEL SHEET 1785mm X 773mm
PART No.
CHECK
31A PF
PORTAL PACK CONTENTS (80mm X 40mm CHANNEL SECTIONS)
40
2
PART No.
C1482
80
COMPONENT DESCRIPTION
CHECK QTY
CHANNEL L = 1482mm
2
40
COMPONENT DESCRIPTION
QTY
PART No.
CHECK
C1704
80
CHANNEL L = 1704mm
PORTAL FRAME ACCESSORIES
2 2 2
Absco Industries
KNEE PLATE
APEX PLATE
MULTI PURPOSE BRACKET
Assembly Instruction Manual
4 120 26
Model: 3045UTK
10mm DYNABOLTS
16mm TEK SCREWS
45mm TEK SCREWS
14/09/2018
1.1
5
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST MAIN PACK (PACK 2 OF 3) CHANNEL SET QTY
1 3 1 4 1 1 4 3
COMPONENT DESCRIPTION
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
Absco Industries
PART No.
CHECK QTY
54AL
1
54BL
3
54CL
1
60BL
4
77CL
1
81AL
1
81CL
4
81DL
3
Assembly Instruction Manual
COMPONENT DESCRIPTION
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1496.5mm
CHANNEL L = 1126.5mm
CHANNEL L = 1126.5mm
Model: 3045UTK
14/09/2018
PART No.
CHECK
54AR 54BR 54CR 60BR 77CR 81AR 81CR 81DR
1.1
6
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST MAIN PACK (PACK 2 OF 3) CHANNEL SET (CONT.) QTY
3 2 2 4 1 2 1 1
COMPONENT DESCRIPTION
CHANNEL WITH HINGES L = 1725mm
CHANNEL L = 1725mm
CHECK QTY
58A
3
58B
1
58C
CHANNEL L = 773mm
CHANNEL L = 1155mm
63A 79B
CHANNEL L = 788mm
81M
CHANNEL L = 329mm
84L
CHANNEL L = 1518mm
CHANNEL L = 1518mm
Absco Industries
PART No.
84R
Assembly Instruction Manual
1 1 2 1 1 4
COMPONENT DESCRIPTION
JAMB L= 1785mm
PART No.
CHECK
89A
89B JAMB L= 1785mm
89C JAMB L= 1725mm
90B JAMB L= 788mm
91A JAMB L= 1120mm
93L JAMB L= 1537mm
93R JAMB L= 797mm
87A LIP TRIM L= 1546mm
Model: 3045UTK
14/09/2018
1.1
7
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
COMPONENT PACKING LIST FRONT FRAME PACK (PACK 3 OF 3)
C2300
2
N1820
80
2
C1785
80
2
C0100
80
CHANNEL L = 100mm
40
CHANNEL L = 1785mm
2
C0240
80
CHANNEL L = 240mm
40
CHANNEL L = 1820mm
2
K0285
80
CHANNEL L = 285mm
40
CHANNEL L = 2300mm
CHECK
40
8
PART No.
40
80
COMPONENT DESCRIPTION
CHECK QTY
40
2
PART No.
40
COMPONENT DESCRIPTION
QTY
M1484
80
CHANNEL L = 1484mm
1 4
HAT= 2290mm
HAT= 1350mm
10
Absco Industries
99A
1
99B
150
MULTI PURPOSE BRACKET
Assembly Instruction Manual
SMALL TRIANGULAR PLATE
6
Model: 3045UTK
SELF DRILLING 16mm TEK SCREWS
10mm DYNABOLTS
14/09/2018
1.1
8
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
Guide on Splitting Sheets •
This product comes with a perforated sheet that is designed to be split into two smaller sheets.
•
These sheets have sharp edges. Once separated please use appropriate foot and hand protection when handling.
•
In order to split the sheet lay it on the ground and lift and fold one end until the perforations have cleanly snapped.
•
Discard the middle piece as scrap when convenient. Fold the scrap piece in half two or three times and throw in garbage.
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
Check sheet for perforations
Fold first side of sheet until free
Fold middle section of sheet until free
Discard middle piece
SPLITTING SHEET 39B QTY
COMPONENT DESCRIPTION
1
Absco Industries
STEEL SHEET 1785mm X 773mm
PART No.
39B
Assembly Instruction Manual
QTY
=
2
Model: 3045UTK
PART No.
COMPONENT DESCRIPTION STEEL SHEET 1785mm X 329mm
14/09/2018
1.1
39B
9
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off from the side.
Channel locks the shed panel into position without the need for screws!
FASTENING SYMBOLS SNAP T iTE
Secure channel to sheeting by SNAPTiTE fastening method. Join components together with one screw at this location only, as some channels have extra holes that are not required for this model of shed. Do not join components together at this location yet, as the screws may obstruct further assembly of the other components.
Absco Industries
Assembly Instruction Manual
D
Join components together by pre-drilling the holes first. Use one component as template to mark where the holes are and drill with a 3mm drill bit. 3mm pop rivet 4mm nut and bolt set.
Model: 3045UTK
14/09/2018
1.1
10
ABSCO UTILITY SHED MODEL: 3045UTK 3.00mW x 4.48mD x 2.10mH
Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other
=
=
=
=
CSJ
=
JOIN>>
JOIN>>
JO
IN
Step 2. Join the first channel to the CSJ by inserting the centre of the CSJ, on an angle, to the end of the channel where the JOIN>> text is marked.
JOIN>> =
Step 3. Join the second channel to the CSJ by positioning the
SJ
J
=
