ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH AU: 1800 029 701 N Z: 0800 466 444
[email protected] www.abscosheds.com.au
Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m
CONCRE
31
TE SLAB
6060mm
00
mm 16
RETE
CONC
20
mm
SLAB
m
2360m
WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm DEEP AROUND THE PERIMETER
BOTTOM CHANNEL REBATED EDGE TE
RE
NC
CO
100mm
THIS WILL HELP WATER EGRESS FROM THE BASE OF THE SHED
75mm WIDE REBATE CONCRETE SLAB
For construction in non-cyclonic areas
We thank you for choosing an Australian made When laying concrete slab, ensure there shed. For further assistance please visit our detailed Wind rating: N2 as per AS4055-2012. is a rebated edge 25mm deep around instructional video library at If you require a higher wind ratingHttp://www.abscosheds.com.au/watch-videos please contact the perimeter. This will help water egress us:
[email protected] or 1800 029 701 the base of the shed. At ABSCO Industries we are always looking tofrom be number ONE, so please let us know what you think of our instructions. Feedback makes us better.
[email protected]
MANU FA CT URED IN A US TR ALIA
ABSCO INDUSTRIES
Download the Absco Sheds Assembly App for instructional videos ASSEMBLY INSTRUCTION MANUAL
SHED MODEL: 23151GK
21-11-2017
PAGE 01
SNAPTiTE Assemb ly
Absco Industries
Assembly Instruction Manual
Model: 3060HK
28/08/2018
1.2
1
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH GENERAL INSTRUCTIONS •
Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details.
•
Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST" pages.
•
Local authority approval must be obtained prior to construction of the shed. Once you have selected your site you will need to lodge a site plan to your local council.
SITE PREPARATION •
The site for the shed must be level. An uneven surface may result in misalignment of parts.
•
The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately illustrated on “FINAL CONSTRUCTION” page. If using a rebated slab ensure that all frame uprights are trimmed 25mm.
10mm drill bits metal & masonry
3mm drill bit
TOOLS REQUIRED
SAFETY NOTES •
Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended.
•
Do not erect your shed in windy conditions.
•
It is highly recommended to erect the shed with two or more people. RECOMMENDED
Absco Industries
Assembly Instruction Manual
Model: 3060HK
28/08/2018
1.2
2
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST Check off all components. MAIN PACK CARTON (PACK 1 OF 3) QTY
COMPONENT DESCRIPTION
PART No.
CHECK QTY
2
STEEL SHEET 1974mm X 773mm
1
STEEL SHEET 1974mm X 773mm
F
2
16
STEEL SHEET 1546mm X 773mm
45A
2
2
STEEL SHEET 2034mm X 329mm
H39B
H26
2
COMPONENT DESCRIPTION GABLE L/H L=1475mm
CHECK
16L
GABLE R/H L=1475mm
16R 13A
BRACE L= 393mm RIDGE BEAM
2
PART No.
97AL
L = 1521mm
2
STEEL SHEET 1974mm X 711mm
H37
RIDGE BEAM
2
97AR
L = 1521mm
1
STEEL SHEET 2034mm X 731mm
H32
1
STEEL SHEET 2034mm X 731mm
H33
1
FITTINGS & ACCESSORIES PACKET (SEE PAGES 6 & 7)
Absco Industries
Assembly Instruction Manual
3
1
RIDGE BEAM JOINER L: 450mm (17.7")
ZARSP
CHANNEL SET PACKET (SEE PAGES 4 & 5)
Model: 3060HK
28/08/2018
1.2
3
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST CHANNEL SET QTY
3 1 1 4 1 1 5 3
COMPONENT DESCRIPTION B
55
CHANNEL L = 1496.5mm 56
A
CHANNEL L = 1496.5mm 56
B
CHANNEL L = 1496.5mm 60
A
CHANNEL L = 1496.5mm B
77
CHANNEL L = 1496.5mm C
77
CHANNEL L = 1496.5mm A
81
CHANNEL L = 1496.5mm 81
CHANNEL L = 1496.5mm
Absco Industries
B
PART No.
CHECK QTY
55BL
3
56AL
1
56BL
1
60AL
4
77BL
1
77CL
1
81AL
5
81BL
3
Assembly Instruction Manual
COMPONENT DESCRIPTION B
55
CHANNEL L = 1496.5mm A
56
CHANNEL L = 1496.5mm 56
B
CHANNEL L = 1496.5mm 60
77
B
CHANNEL L = 1496.5mm
55BR 56AR 56BR
77BR 77CR
C
77
CHANNEL L = 1496.5mm
81AR
A
CHANNEL L = 1496.5mm 81
B
CHANNEL L = 1496.5mm
Model: 3060HK
CHECK
60AR
A
CHANNEL L = 1496.5mm
81
PART No.
28/08/2018
81BR
1.2
4
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST CHANNEL SET (CONTINUED) QTY
2 4 1 2 3 2 4
COMPONENT DESCRIPTION
CHANNEL L = 773mm
63A
A
CHANNEL L = 1155mm
CHANNEL L = 788mm
79
81
79B
B
81M
M
CHANNEL L = 329mm 1 HC
CHANNEL WITH HINGES L = 1974mm 2 HC
CHANNEL L = 1974mm
A 87
1 2 1 1
HC1
3
HC2
1
87A
LIP TRIM L= 1546mm
Absco Industries
COMPONENT DESCRIPTION
CHECK QTY
58C
C 58
63
PART No.
Assembly Instruction Manual
1
PART No.
CHECK
90B
Part No. Here
JAMB L= 788mm
91A
Part No. Here
JAMB L= 1120mm
93L
Part No. Here
JAMB L= 1537mm
93R
Part No. Here
JAMB L= 797mm
Part No. Here
JAMB L= 2034mm
Part No. Here
JAMB L= 2034mm
Part No. Here
JAMB L= 1974mm
Model: 3060HK
28/08/2018
HJ1
HJ2 HJ3
1.2
5
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST FITTINGS & ACCESSORIES PACKET CONTENTS QTY
COMPONENT DESCRIPTION
PART No.
1
DOUBLE DOOR KIT (SEE BELOW)
1
SINGLE DOOR KIT (SEE OVER)
CHECK QTY
CAP GABLE L: 170mm
14A
24
3
DOOR STRAP L: 165mm
12A
1
1
RIDGE CAP JOINER
19
RIDGE PLATES
CHANNEL JOINER L= 200mm (7.9")
98A
1
RBP
1
CSJ
4
PART No.
CHECK
ASSEMBLY INSTRUCTIONS
1
2
5
COMPONENT DESCRIPTION
SELF DRILLING HEX HEAD TEK SCREWS (NO HOLE REQUIRED)
3mm (0.12") DRILL BIT
HEX TEK SCREW DRIVER BIT
PHILLIPS HEAD DRIVER
93B JAMB L= 75mm
DOUBLE DOOR KIT PACKET CONTENTS
3
DOOR PADBOLT
22A
2
DOOR PADBOLT HASP
1
SELF TAPPING SCREWS PACKET CONTAINING 220
8
3/16 ROUND HEAD BOLTS & NYLOCK NUTS
12
3/16 COUNTERSUNK SCREWS & NUTS
12
3.2 x 8mm BLIND POP RIVETS
Absco Industries
Assembly Instruction Manual
Model: 3060HK
28/08/2018
1.2
6
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST SINGLE DOOR KIT PACKET CONTENTS
1
22A
DOOR PADBOLT
1
SELF TAPPING SCREWS PACKET CONTAINING 220
12
3/16 COUNTERSUNK SCREWS & NUTS
DOOR PADBOLT HASP
1
3.2 x 8mm BLIND POP RIVETS
12
STEEL SHEET 2034mm X 773mm
12
STEEL SHEET 2034mm X 773mm
4
40
5
H30 H31
4 1
40
MAIN PACK CARTON (PACK 2 OF 3)
C1954
80
CHANNEL L = 1954mm HIGH-PORTAL PACK (SEE BELOW)
C1482
80
CHANNEL L = 1482mm
HIGH-PORTAL FRAME ACCESSORIES
4 4 4 Absco Industries
KNEE PLATE
APEX PLATE
8 300
10mm DYNABOLT
16mm TEK SCREWS
MULTI PURPOSE BRACKET Assembly Instruction Manual
Model: 3060HK
28/08/2018
1.2
7
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
COMPONENT PACKING LIST HIGH-FRONT FRAME PACK (PACK 3 OF 3)
C2300
2
N2070
80
2
C2034
80
2
C0100
80
CHANNEL L = 100mm
40
CHANNEL L = 2034mm
2
C0240
80
CHANNEL L = 240mm
40
CHANNEL L = 2070mm
2
K0285
80
CHANNEL L = 285mm
40
CHANNEL L = 2300mm
CHECK
40
10
PART No.
40
80
COMPONENT DESCRIPTION
CHECK QTY
40
2
PART No.
40
COMPONENT DESCRIPTION
QTY
M1484
80
CHANNEL L = 1484mm
1 4
HAT= 2290mm
HAT= 1350mm
10
Absco Industries
99A
1
99B
150
MULTI PURPOSE BRACKET
Assembly Instruction Manual
SMALL TRIANGULAR PLATE
6
Model: 3060HK
SELF DRILLING 16mm TEK SCREWS
10mm DYNABOLTS
28/08/2018
1.2
8
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
Guide on Splitting Sheets •
This product comes with a perforated sheet that is designed to be split into two smaller sheets.
•
These sheets have sharp edges. Once separated please use appropriate foot and hand protection when handling.
•
In order to split the sheet lay it on the ground and lift and fold one end until the perforations have cleanly snapped.
•
Discard the middle piece as scrap when convenient. Fold the scrap piece in half two or three times and throw in garbage.
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
Check sheet for perforations
Fold first side of sheet until free
Fold middle section of sheet until free
Discard middle piece
SPLITTING SHEET H39 QTY
COMPONENT DESCRIPTION
1
Absco Industries
STEEL SHEET 2034mm X 773mm
PART No.
H39
Assembly Instruction Manual
QTY
=
2
Model: 3060HK
PART No.
COMPONENT DESCRIPTION STEEL SHEET 2034mm X 329mm
28/08/2018
1.2
H39B
9
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off from the side.
Channel locks the shed panel into position without the need for screws!
FASTENING SYMBOLS SNAP T iTE
Secure channel to sheeting by SNAPTiTE fastening method. Join components together with one screw at this location only, as some channels have extra holes that are not required for this model of shed. Do not join components together at this location yet, as the screws may obstruct further assembly of the other components.
Absco Industries
Assembly Instruction Manual
D
Join components together by pre-drilling the holes first. Use one component as template to mark where the holes are and drill with a 3mm drill bit. 3mm pop rivet 4mm nut and bolt set.
Model: 3060HK
28/08/2018
1.2
10
ABSCO HIGHLANDER SHED MODEL: 3060HK 3.00mW x 5.96mD x 2.30mH
Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other
=
=
=
=
CSJ
=
JOIN>>
JOIN>>
JO
IN
Step 2. Join the first channel to the CSJ by inserting the centre of the CSJ, on an angle, to the end of the channel where the JOIN>> text is marked.
JOIN>> =
Step 3. Join the second channel to the CSJ by positioning the
SJ
J
=
