ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH AU: 1800 029 701 N Z: 0800 466 444
[email protected] www.abscosheds.com.au
Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m
AB
ETE SL
CONCR
3100mm
m
3100m
16
RETE
CONC
20
mm
SLAB
m
2360m
WHEN LAYING YOUR CONCRETE
For construction in non-cyclonic areas SLAB, ENSURE THERE IS A EDGE 25mm DEEP Wind rating: N2 as per REBATED AS4055-2012 AROUND THE PERIMETER
REBATED EDGE E
ET
CR
N CO
100mm
When laying concrete slab,HELP ensure THIS WILL WATER there EGRESS FROM THE BASE OF THE SHED is a rebated edge 25mm deep around the perimeter. This will help water egress from the base of the shed.
BOTTOM CHANNEL
75mm WIDE REBATE CONCRETE SLAB
We thank you for choosing an Australian made shed. For further assistance please visit our detailed instructional video library at MANU FA CT URED Http://www.abscosheds.com.au/watch-videos
Download the Absco Sheds Assembly App At ABSCO Industries we are always looking to be number ONE, so please let us know what you think for instructional videos of our instructions. Feedback makes us better.
IN A US TR ALIA
[email protected]
SNAPTiTE Assemb ly
ABSCO INDUSTRIES
Absco Industries
ASSEMBLY INSTRUCTION MANUAL
Assembly Instruction Manual
SHED MODEL: 23151GK
Model: 3030BRK
21/08/2018
21-11-2017
PAGE 01
1.52
1
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH GENERAL INSTRUCTIONS •
Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details.
•
Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST" pages.
•
Local authority approval must be obtained prior to construction of the shed. Once you have selected your site you will need to lodge a site plan to your local council.
SITE PREPARATION •
The site for the shed must be level. An uneven surface may result in misalignment of parts.
•
The shed shall be erected on top of a reinforced concrete slab and anchored down appropriately illustrated on “FINAL CONSTRUCTION” page. If using a rebated slab ensure that all frame uprights are trimmed 25mm.
10mm drill bit metal/masonry
7mm drill bit
5mm drill bit
3mm drill bit
TOOLS REQUIRED
SAFETY NOTES •
Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended.
•
Do not erect your shed in windy conditions.
•
It is highly recommended to erect the shed with two or more people. RECOMMENDED
Absco Industries
Assembly Instruction Manual
Model: 3030BRK
21/08/2018
1.52
2
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
COMPONENT PACKING LIST Check off all components. MAIN PACK CARTON QTY
COMPONENT DESCRIPTION
PART No.
CHECK QTY
6
STEEL SHEET 2034mm X 773mm
6
STEEL SHEET 2034mm X 773mm
H31
2
8
STEEL SHEET 1546mm X 773mm
45A
2
2
STEEL SHEET 2034mm X 329mm
H39B
1
1
RIDGE BEAM
97AR
1
H30
2
FITTINGS & ACCESSORIES PACKET
Absco Industries
Assembly Instruction Manual
GABLE L/H L=1475mm
PART No.
CHECK
16L
GABLE R/H L=1475mm
16R 13A
BRACE L= 393mm
RIDGE BEAM JOINER L: 450mm (17.7") RIDGE BEAM
ZARSP
97AL
L = 1521mm
L = 1521mm
1
COMPONENT DESCRIPTION
1
CHANNEL SET
Model: 3030BRK
21/08/2018
1.52
3
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
COMPONENT PACKING LIST Check off all components. CHANNEL SET QTY
2 3 2 2 1 1 2 1 4
COMPONENT DESCRIPTION 55
B
CHANNEL L = 1496.5mm 81
A
CHANNEL L = 1496.5mm 81
B
CHANNEL L = 1496.5mm A
60
CHANNEL L = 1496.5mm 77
B
CHANNEL L = 1496.5mm C
77
CHANNEL L = 1496.5mm M 81
CHANNEL L = 329mm
PART No.
CHECK QTY
55BL
2
81AL
3
81BL
2
60AL
2
77BL
1
77CL
1
81M
2
93L
Part No. Here
JAMB L= 1537mm
A
87
1
COMPONENT DESCRIPTION 55
B
CHANNEL L = 1496.5mm 81
PART No.
CHECK
55BR 81AR
A
CHANNEL L = 1496.5mm 81
B
CHANNEL L = 1496.5mm
81BR 60AR
A
60
CHANNEL L = 1496.5mm 77
B
CHANNEL L = 1496.5mm C
77
CHANNEL L = 1496.5mm
77BR 77CR HJ2
Part No. Here
JAMB L= 2034mm
93R
Part No. Here
JAMB L= 797mm
87A
LIP TRIM L= 1546mm
Absco Industries
Assembly Instruction Manual
Model: 3030BRK
21/08/2018
1.52
4
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
COMPONENT PACKING LIST Check off all components. FITTINGS & ACCESSORIES PACKET CONTENTS QTY
COMPONENT DESCRIPTION
PART No.
CHECK QTY
COMPONENT DESCRIPTION
PART No.
SELF DRILLING HEX HEAD TEK SCREWS (NO HOLE REQUIRED)
2
CAP GABLE L: 170mm
14A
24
1
RIDGE PLATES
RBP
1
CSJ
1
HEX TEK SCREW DRIVER BIT
IM
1
PHILLIPS HEAD DRIVER
1
8G x 3/8 SELF TAPPING SCREWS 100 PK
11 1 1
CHANNEL JOINER L= 200mm (7.9") ASSEMBLY INSTRUCTION MANUAL
8G x 3/8 SELF TAPPING SCREWS 220 PK
Absco Industries
PACK220
Assembly Instruction Manual
CHECK
3mm (0.12") DRILL BIT
Model: 3030BRK
21/08/2018
1.52
5
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
COMPONENT PACKING LIST Check off all components. HIGH GARAGE-FRONT FRAME PACK
C2300
2
40
CHANNEL L = 2300mm 0 07 N2
2
2
40
CHANNEL L = 2070mm 4 03 C2
2
2
40
CHANNEL L = 2034mm
M1484
2
2
40
CHANNEL L = 1484mm
K0
26
C0240
0 10 C0
80
C0100
K0
0
42
80
KO420
CHANNEL L = 420mm
7
KO267
80
0 24 C0
80
CHANNEL L = 100mm
4
48
M1
80
K0285
CHANNEL L = 240mm
C2034
80
5
CHANNEL L = 285mm
N2070
80
40
10
CHECK
28
K0
80
40
80
PART No.
COMPONENT DESCRIPTION
CHECK QTY
40
40
2
0 30 C2
PART No.
40
COMPONENT DESCRIPTION
QTY
1
CHANNEL L = 267mm
HIGH-FRONT FRAME FITTINGS PACK (SEE BELOW)
HIGH-FRONT FRAME FITTINGS PACK CONTENTS
10 6
MULTI PURPOSE BRACKET
10mm DYNABOLTS
1
SMALL TRIANGULAR PLATE
150
SELF DRILLING 16mm TEK SCREWS
ROLLER DOOR PACK
1 Absco Industries
ROLLER SHUTTER UNIT WITH TRACKS Assembly Instruction Manual
Model: 3030BRK
21/08/2018
1.52
6
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
Guide on Splitting Sheets •
This product comes with a perforated sheet that is designed to be split into two smaller sheets.
•
These sheets have sharp edges. Once separated please use appropriate foot and hand protection when handling.
•
In order to split the sheet lay it on the ground and lift and fold one end until the perforations have cleanly snapped.
•
Discard the middle piece as scrap when convenient. Fold the scrap piece in half two or three times and throw in garbage.
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
SCRAP
Check sheet for perforations
Fold first side of sheet until free
Fold middle section of sheet until free
Discard middle piece
SPLITTING SHEET H39 QTY
COMPONENT DESCRIPTION
1
Absco Industries
STEEL SHEET 2034mm X 773mm
PART No.
H39
Assembly Instruction Manual
QTY
=
2
Model: 3030BRK
COMPONENT DESCRIPTION STEEL SHEET 2034mm X 329mm
21/08/2018
1.52
PART No.
H39B
7
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off from the side.
Channel locks the shed panel into position without the need for screws!
FASTENING SYMBOLS SNAP T iTE
Secure channel to sheeting by SNAPTiTE fastening method. Join components together with one screw at this location only, as some channels have extra holes that are not required for this model of shed. Do not join components together at this location yet, as the screws may obstruct further assembly of the other components.
Absco Industries
Assembly Instruction Manual
D
Join components together by pre-drilling the holes first. Use one component as template to mark where the holes are and drill with a 3mm drill bit. 3mm pop rivet 4mm nut and bolt set.
Model: 3030BRK
21/08/2018
1.52
8
ABSCO BUSH RANGER SHED MODEL: 3030BRK 3.00mW x 3.00mD x 2.30mH
Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other
=
=
=
=
CSJ
=
JOIN>>
JOIN>>
JO
IN
Step 2. Join the first channel to the CSJ by inserting the centre of the CSJ, on an angle, to the end of the channel where the JOIN>> text is marked.
JOIN>> =
Step 3. Join the second channel to the CSJ by positioning the
SJ
J
=