[PDF]Technical Data - Rackcdn.comhttps://04646a9cf351cc0d3888-b8b406d15fe93f790abb5bf0e9ab7ab3.ssl.cf3.rackcd...
3 downloads
183 Views
429KB Size
Technical Data Co-Axial And Satellite Sockets Brief product description:
Features:
A standard range of white moulded wall accessories offering superb quality and exceptional value.
• A standard design - suitable for domestic or commercial installations.
Product Images
960/962
961/963
964
965
966
Technical Specifications BS3041 & BS5733 No No 25mm 60.3mm 86mm x 86mm x 27mm (960, 961, 962, 963, 966 products) 86mm x 86mm x 35mm (964, 965 products)
Standard(s) RoHS Directive WEEE Directive Mounting Box Depth(Min) Fixing Centres Size
Packaging Information Cat No.
Description
Packaging Type
Barcode
Pack Quantity
Product
Inner Box
Outer Box
Each
Inner Box
Outer Box
Individual
Inner Box
Outer Box
960
1G Co-Axial Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166960095
5021166960088
961
2G Co-Axial Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166961092
5021166961085
962
1G Isolated Co Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166962099
5021166962082
963
2G Isolated Co Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166963096
5021166963089
964
1G Satellite Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166964093
5021166964086
965
2G Sat.&Co Socket
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166965090
5021166965083
966
2G Diplex TV/FM
Plain Bag
Plain Inner
Plain Outer
1
10
100
/
5021166966097
5021166966080
Weights & Dimensions Cat No.
Description
Dimension (W x L x H) cm Product
Inner Box
Outer Box
CMB (m3)
Weight (g) Each
Inner Box
Outer Box
Outer Box
960
1G Co-Axial Socket
12 x 15.8 x 9.2 25.1 x 48 x 16.5
75
750
8700
0.0216864
961
2G Co-Axial Socket
12 x 15.8 x 9.2 25.1 x 48 x 16.5
8
800
9000
0.0216864
962
1G Isolated Co Socket
12 x 15.8 x 9.2 25.1 x 48 x 16.5
4
400
6000
0.0216864
963
2G Isolated Co Socket
12 x 15.8 x 9.2 25.1 x 48 x 16.5
6
600
8600
0.0216864
964
1G Satellite Socket
13 x 16 x 9.2
27 x 47 x 16.8
65
650
8000
0.0213192
965
2G Sat.&Co Socket
13 x 16 x 9.2
27 x 47 x 16.8
7
700
8350
0.0213192
966
2G Diplex TV/FM
12 x 17 x 9.2
25.1 x 48 x 16.5
6000
0.0216864
Co-Axial And Satellite Sockets Installation Information Safety Warning Before use please read and carefully use in accordance with these safety wiring instructions. To ensure a satisfactory operation these products should be installed by a competent person. If in doubt seek advice from a qualified engineer. These products should not be installed into the same enclosure containing mains exceeding 50V. Avoid running the telecom cable within 50mm of mains electrical cable. Socket Types 1. Non-Isolated – Intend for use in installations with direct connection to the Aerial down-lead.
Technical Helpline: 0845 194 7584
2. Isolated – This type of co-axial outlet provides a safety installation between the Aerial
If in doubt consult a competent electrician.
down-lead and the co-axial socket. These sockets are not suitable for use in systems where DC signals are passed through the socket. For example, where masthead/headend equipment is controlled by receiver/decoder equipment). 3. TV/FM Diplex – This diplexer unit separates the TV and FM band signals from systems where both signals are combined on a single aerial down-lead. General Installation Instructions 1) If using the new product to replace an old one, note the cable connections and wire up new product in the same way as the old one, with Earthing as stated in these instructions. 2) Ensure the mounting box (metal or patress) for either flush or surface mounting is the appropriate size for the product. 3) Route the cable through the most suitable entry point of the mounting box. If a metal box is used, a protective cable grommet should be used. 4). Strip the cable to the dimensions shown in the diagram opposite. (Fig.1) 5). Connect the inner conductor to the square terminal block and securely clamp the screening braid under the clamp, ensuring that there are no loose conductor strands that may cause short circuits. To assist with the correct installation of this product please consult the appropriate wiring diagram. 6). When tightening the screening braid clamps ensure that the cable is firmly gripped and that the inner insulation is not squashed flat beyond a slight oval shape. Always tighten the terminal screws securely, but do not overtighten. 7) Carefully position the accessory into the wall box, ensuring that no wires are trapped between the plate and the wall. Do not overtighten the screws. (Fit screw covers + clip-on front-plate as appropriate) 8) Once work has been completed correctly, the product is now ready for use. * Note - If your installation uses a four lug metal mounting box, remove the top and bottom lugs or bend fully back. Connection Diagram For 1 Gang Co-axial Socket, 1 Gang Isolated Co-axial Socket, Satellite F-Type Socket, and TV/FM Diplex Socket. FIG.1 ENSURE BRAID WIRES ARE CLEAR OF TERMINAL
FIRMLY CLAMP CABLE & BRAID
Step 1: Remove 17mm of outer sheath Step 2: Twist screening braid back onto itself until 5mm long FROM AERIAL DOWN-LEAD OR SATELLITE RECEIVER
Step 3: Remove 7mm of inner insulating sheath
CLAMP CENTRE CONDUCTOR UNDER TERMINAL
Connection Diagram For 2 Gang Co-axial Socket, 2 Gang Isolated Co-axial Socket, and 2 Gang Satellite F-Type Socket and Co-axial socket.
FIG.1
FIRMLY CLAMP CABLE & BRAID
FROM AERIAL DOWN-LEAD
CLAMP CENTRE CONDUCTOR UNDER TERMINAL
FROM AERIAL DOWN-LEAD OR SATELLITE RECEIVER
Co-Axial And Satellite Sockets Installation Information Triplex – Tv/Fm/Sat Outlet And Diplex - Tv/Fm Connection 1. Fully loosen the cable clamp securing screws and remove cable clamp. 2. Fully push the centre copper core of the aerial cable into hole provided. Ensure that no loose strands of copper braid are touching the inner copper core. 3. Replace the cable clamp and secure by tightening the screw. Do not overtighten to avoid crushing the cable. 4. An earth bond terminal is provided if required.
Triplex – Tv/Fm/Sat Outlet Plate With Return And Telephone Outlet
EARTH TELEPHONE TELEPHONE
RETURN RETURN
TRIPLEX
TRIPLEX
EARTH
TRIPLEX/DIPLEX CONNECTION UNIT
TO LOFT LOFT TO BOX BOX
FROM OR OR FROMDUPLEXER DUPLEXER LOFT BOX
LOFT BOX
FROM DUPLEXER OR LOFT BOX
FROM DUPLEXER OR LOFT BOX
Return Connection (Back To Loft Box) 1.Fully loosen the two lid securing screws, and open the lid. 2.Loosen but do not remove the centre terminal screw. 3.Insert the centre copper core of the aerial cable into the terminal hole. Ensure that no loose strands of copper braid are touching the inner copper core. Secure by lightly tightening the terminal screw. 4.Close the lid and tighten the securing screws. Do not overtighten to avoid crushing the cable. 5.An earth bond terminal is provided if required.
Telephone Socket Connection - Slave Socket provided with unit The ends of the individual conductors should have the insulation removed by approx. 8mm. Connect each wire as per the BT Wiring Scheme below. Ensure that only the bare end of the wire enters the terminal, and no bare wires are visible. Always tighten the terminal screws securely.
BT Wiring Scheme Terminal / Line
Colour
1
Green with White rings
2
Blue with White rings
3
Orange with White rings
4
White with Orange rings
5
White with Blue rings
6
White with Green rings
*Note - An existing installation may use a different wiring colour code system. It is essential that the new product is wired up in the same way as the old one. The simplest way is either to label each conductor with the location of the terminal to which it connects as you release it or to transfer one conductor at a time to the corresponding terminal on the new product.