Download


EDMO maintains a quality control system and is ISO 9001:2008/AS9120 registered // edmo.com // 1.800.235.3300. COMMITTED TO ... test equipment and tool...

10 downloads 262 Views 21MB Size

AVIONICS CATALOG

EDMO Distributors EDMO Distributors, Inc. 12830 E. Mirabeau Parkway Spokane Valley, WA 99216

phone: 800.235.3300 | 509.535.8280 fax: 800.828.0623 | 509.535.8266 visit us: www.edmo.com

LABELWORKS PX Meet the newest Epson LABELWORKS PX Printers.

The Epson LABELWORKS PX Printers are easy-to-use, powerful label printers with fast print speeds and compact features. Designed to print on more than 163 materials including magnetic tape, heat shrink tube, glow-in-the-dark, and industrial adhesive labels up to 1.5 inches in width, these printers have the ability to communicate visually across a wide variety of industry applications.

LW-PX900 HANDHELD PRINTER • • • •

Reduces tape waste by 20%* Lowers labeling costs up to 60%** Innovative time saving features Lifetime Warranty

LW-PX800 DESKTOP PRINTER • • • •

Wi-Fi and network connectivity Free iOS and Android labeling apps Free PC software and support Lifetime Warranty

SEE PAGE 72 FOR MORE DETAILS

LW-PX900 Handheld Printer

LW-PX800 Desktop Printer

LABELWORKS PX products are built by Epson, and distributed through its subsidiary K-Sun Corporation. K-Sun also carries the widest variety of labeling tape—colors, sizes, and material—for portable label printers. For more info visit ksun.com K-SUN Corporation

1.800.622.6312 370 SMC Drive | Somerset WI, 54025

*Compared to previous generation Epson label printers. **Compared to competitor’s labels with 24mm margin waste.

COMMITTED TO QUALITY FOR OVER 40 YEARS. EDMO is a wholesale distributor of aircraft electronics and accessories, installation and bench supplies, test equipment and tooling, tactical communications products, ground support equipment, and pilot supplies. This extensive product range is complemented by rapid delivery, competitive prices, and personalized service. Customers know that when they purchase from EDMO, they can expect products and services that are regulated by the exacting standards set forth by EDMO’s ISO-certified quality control system.

EDMO maintains a quality control system and is ISO 9001:2008/AS9120 registered // edmo.com // 1.800.235.3300

Sections Electrical Interconnect

1

Wire, Cable & Accessories

2

Pitot Static Accessories

3

Avionics & Instrument Mounting

4

Tools

5

Chemicals & Cleaners

6

Antennas

7

ELTs & Accessories

8

Airband Communications

9

Transponders, Altitude Encoders & Serializers

10 11 12 13 14 15 16 17 18 19

Headsets, Intercoms & Accessories Clocks, Instruments & Annunciators Air Data & Fuel Flow GPS Accessories Aircraft Lighting Inverters & Converters Tactical Communications & Audio Systems Test Equipment Auxiliary Power Units & Battery Chargers

About EDMO

EDMO Distributors is an independent wholesale distributor of aircraft electronics and accessories with a central office located in Spokane, Washington, USA. EDMO carries a large inventory of installation and bench supplies, test equipment and tooling, tactical communications products, ground support equipment, and pilot supplies. This extensive product range is complemented by rapid delivery, competitive prices, and personalized service. To this end, EDMO maintains a stringent quality control system and is an ISO 9001:2008/AS9120 registered company. As EDMO continues to provide more products to more customers, it has expanded, extending its reach to a global level with additional offices in São Paulo, Brazil; Shanghai, China; and Adelaide, Australia. Each location operates independently while maintaining the same high level of commitment to quality and service.

OUR SERVICES EDMO strives to be a one-stop shop for its clientele by providing valuable in-house services that save both time and money. These services include: custom wire and cable services, custom placards and legends, and ELT and PLB programming. We offer multiple ways to access our services: –– Visit us online at edmo.com to access our custom placard ordering area under Dealer Tools –– Get the details about our wire and cable options online under the Laser Wire Marking tab on our home page or flip to page 56 of this catalog for more details –– Call 1.800.235.3300 to learn more about PLB and ELT programming

6

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Table of Contents 

Table of Contents Active Headsets.................................................................218

Chronometers.....................................................................258

ADS-B Solutions................................................................210

Circuit Breakers & Accessories............................................33

Airband Communications...................................................195

Cleaners - Electrical...........................................................124

Airband Handhelds.............................................................204

Clocks, Instruments & Annunciators..................................257

Airborne Telephone Adapters.............................................347

Compasses........................................................................275

Aircraft Lighting..................................................................299

Connectors...........................................................................12

Air Data Attitude Heading System......................................280

Converters..........................................................................320

Air Data Computer Systems...............................................280

Cooling Fans........................................................95, 276, 297

Air Data Converters & Adapters.........................................281

Corrosion Inhibitors............................................................125

Air Data & Fuel Flow...........................................................279

Couplers & Diplexers..........................................................151

Air Data & Pitot Static Test Sets.........................................364

Course Deviation Indicators...............................................296

Airframe/Powerplant Test Sets...........................................372

Cover Plates, Adapter Plates & Clamps...............................84

Altitude Encoders...............................................................212

Crimp & Barrel Die Tool Sets..............................................103

Annunciator Control Units..................................................273

Databus Analyzers..............................................................362

Antenna Docks...................................................................295

Digital Audio Control System (DACS).................................335

Antennas............................................................................127

Dimmers.............................................................................305

Antenna Sealing Supplies..................................................172

DME Transponder Antennas..............................................147

Anti-Collision & Position Lights..........................................306

Drivers................................................................................118

Audio Controllers................................................................330

Electrical Interconnect..........................................................11

Audio Mixer Panels............................................................337

ELT Antennas.....................................................................188

Audio Storage And Playback Unit......................................341

ELT Batteries......................................................................193

Auxiliary Power Units.........................................................392

ELTs 406 MHz.....................................................................176

Auxiliary Power Units & Battery Chargers..........................389

ELTs & Accessories............................................................175

Avionics & Instrument Mounting..........................................83

ELT Test Sets..............................................................191, 379

Battery Chargers................................................................393

Emergency Power Supplies...............................................326

Beacons.............................................................................311

Expandable Sleeving & Vinyl Tubing....................................70

Bench Test Sets.................................................................357

Fiber Optic Inspection .......................................................376

Bulkhead Seals & Sealant....................................................71

Flightline Test Sets.............................................................354

Cabin Lights.......................................................................303

FM Antennas......................................................................165

Cable Tie Mounts & Cable Clamps......................................63

Frequency Converters & Current Limiters..........................325

Cable Ties.............................................................................61

Fuel Quantity Test Sets......................................................368

Cable Tie Tools.............................................................63, 120

Glide Slope Antennas.........................................................158

Chemicals & Cleaners........................................................123

GPS Accessories................................................................287

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

7

Table of Contents 

8

GPS, XM & Iridium Antennas.............................................159

Pitot Static Tubing & Fittings................................................80

Grommets.............................................................................77

Plugs & Jacks.......................................................................30

Grom Strips..........................................................................76

Power Outlets.......................................................................38

Ground Power Units...........................................................390

Power Supply Units............................................................390

Ground Support Communication Headsets.......................235

Pressure Switches..............................................................269

Handheld Microphones......................................................244

Pressure & Temperature Sensors & CO Detectors.............264

Hardware..............................................................................89

Propeller Balancers/Analyzers...........................................374

Headphones.......................................................................236

Radio Altimeter Antennas...................................................164

Headset Adapters & Interfaces..........................................237

Remote Relays...................................................................288

Headset PTT Switches.......................................................243

Re-Radiating Kits...............................................................289

Headsets, Intercoms & Accessories..................................217

Satcom...............................................................................202

Heat Guns..........................................................................112

Scanners............................................................................207

Heat Shrink Tubing...............................................................66

Sections..................................................................................5

Helicopter Helmets.............................................................246

Soldering Irons...................................................................113

Hex & Spline Wrenches......................................................116

Solder Sleeves & Jackets.....................................................28

Insertion & Extraction...........................................................99

Speed & Altitude Indicators................................................274

Instrument Accessories......................................................275

Spiral Wrap...........................................................................69

Instrument Lighting............................................................300

Switch & Cable Assemblies................................................248

Intercom Systems..............................................................253

Switches...............................................................................40

Interfaces & Accessories....................................................347

Table of Contents...................................................................7

Inverters..............................................................................322

Tactical Communications & Audio Systems.......................329

Inverters & Converters........................................................319

Tactical Radios...................................................................343

Jack Housings......................................................................31

Tape......................................................................................71

Label & Shrink Tube Printers................................................72

Taxi, Landing & Recognition Lights....................................313

Land Mobile Radio Test Sets.............................................370

Terminal Blocks & Bus Bars.................................................49

Lighting Accessories..........................................................315

Terminals & Splices..............................................................25

Marker Beacon Antennas...................................................156

Terrain Awareness Control Units........................................295

Microphone Lights..............................................................245

Test Equipment...................................................................353

Modular Accessory Remote Cards & Enclosures..............285

Tilt Adapters.......................................................................294

Mounting Brackets...............................................................86

Tooling..................................................................................97

Mounting Systems...............................................................87

Towel Bar/VOR/LOC/GS Antennas....................................145

Mu-Metal..............................................................................76

Transponders......................................................................210

Navigation Antennas..........................................................139

Transponders, Altitude Encoders & Serializers..................209

Notch Filters.......................................................................288

Turn Coordinators And Turn & Slip Indicators....................269

Panel Docks.......................................................................291

UHF L Band Radiophone Antennas...................................167

Panel Mount Transceivers..................................................196

VHF Antennas.....................................................................128

PA/Siren Systems...............................................................337

VHF Base Station & Vehicle Antennas...............................171

Passive Headsets...............................................................227

VHF Combo Antennas........................................................136

Pitot Static Accessories.......................................................79

Vises...................................................................................119

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

TABLE OF CONTENTS 

VOR Indicators...................................................................274

ADVERTISER INDEX

Wire & Cable.........................................................................56

K-Sun Corporation (Inside Cover - Front)

Wire, Cable & Accessories...................................................55

Mid-Continent Instruments and Avionics/

Wire & Cable Strippers.......................................................109

True Blue Power.....................................................................1

Wire & Cable Testers..........................................................381

Aircraft Electronics Association..............................................2

Wire Cutters........................................................................111

Kroy........................................................................................4 Ico-Rally...............................................................................65 Buller Enterprises.................................................................96 Comant...............................................................................126 McMurdo Kannad...............................................................174 Artex...................................................................................177 Icom............................................................................198, 205 Trans-Cal Industries...........................................................213 Pilot USA............................................................................225 Comm Innovations.............................................................249 Davtron.......................................................................259, 260 Cobham..............................................................328, 342, 352 Nav-Aids, Ltd.....................................................................367 WS Technologies................................................................378 AirGizmos...........................................................................396 ACR / Artex (Inside Cover - Back)

Visit Us Online We provide several ways to speed up the online shopping process. Our website is equipped with multiple tools that help you find or reorder the parts you need.

Quick Cart Quickly add part numbers that you already know to your shopping cart.

Fast Finder Enter the first few characters for a part number or series of part numbers and get a results page with all related parts.

Favorites Save your most frequently purchased items to your favorites list— this feature keeps all of your regularly order parts on hand and ready for the next time that you’re ready to reorder.

Product CSV Download a CSV file of all of EDMO’s active online products for quick upload to your own inventory system.

Order and Invoice History Download past orders and other documents required for traceability from your order/invoice history.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

9

Electrical Interconnect

Connectors........................................................................................................ 12 Terminals & Splices........................................................................................... 25 Solder Sleeves & Jackets.................................................................................. 28 Plugs & Jacks.................................................................................................... 30 Jack Housings................................................................................................... 31 Circuit Breakers & Accessories......................................................................... 33 Power Outlets.................................................................................................... 38 Switches............................................................................................................ 40 Terminal Blocks & Bus Bars.............................................................................. 49

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

11

Electrical Interconnect

1

Connectors

CONNECTORS BNC CONNECTORS EDMO#

MFR#

TYPE

PLATING BODY/ CONTACT

COMPATIBLE CABLE TYPE

CRIMP 31-315 31-320 31-320RFX 36800-RFX 225395-1 225395-2 225395-3 5225395-6 225395-7 225396-1 225396-2 225396-7 225397-1 225398-1 2-330358-2 2-331350-1 2-331351-1 5225395-1 5225398-6 PE4044

31-315 31-320 31-320-RFX 000-36800-RFX 225395-1 225395-2 225395-3 52253956 225395-7 225396-1 225396-2 225396-7 225397-1 225398-1 2-330358-2 2-331350-1 2-331351-1 5225395-1 5225398-6 PE4044

male male male female male male male male male female female female female female male male female male female male

nickel/gold nickel/gold nickel/gold nickel/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold nickel brass/gold silver gold/brass silver gold/brass beryllium copper/gold nickel gold/brass nickel beryllium copper/gold nickel/gold

RG174, 188, 316 58, 141 58, 141, 142, 400 58, 141, 142, 400 58, 58A, 58B, 58C 59, 59A, 59B, 62, 62A, 62B 223, 55, 55A, 55B 142, 142A, 142B 174, 188 58, 58A, 58B, 58C 59, 59A, 59B, 62, 62A, 62B 174, 188 58, 58A, 58B, 58C 58, 58A, 58B, 58C 142, 142A, 142B 58, 58A, 58B, 58C 58, 58A, 58B, 58C 58, 58A, 58B, 58C 142, 142A, 142B RG55/RG141/RG142/RG223/RG400

male male female

nickel/silver nickel/silver nickel/gold

58, 141, 142, 400 58, 141, 142, 400 55, 142, 223, 400

male dual crimp

female dual crimp

female panel dual

female bulkhead dual

SOLDER & SCREW 31-2 31-2RFX 31-5

031-2 31-2RFX 031-5

female solder & screw

male solder & screw

RIGHT ANGLE CRIMP RFB1110-C1 225974-1

R/FRFB1110-C1 male 225974-1 male

31-335-RFX 225973-4

31-335-RFX 225973-4

male male

nickel/gold/Teflon nickel gold/brass nickel/gold silver gold/brass

142 58, 58A, 58B, 58C RG-141, RG-58, RG-58C 142, 142A, 142B

male right angle

male right angle

Don’t see what you need? We have other connectors available, so please visit our website or give us a call—we may have it in stock. If we don’t have it we can probably find it for you.

CRIMP TOOLS FOR BNC CONNECTORS EDMO#

MFR#

EDMO#

TOOL

MFR#

DIE

HX4

HX4

Y197

Y197

AF8

AF8

TH270

TH270

354940-1

3549401

220189-3

220189-3

For more information on the HX4 and AF8, see page 104, for 354940-1, see page 107. Parts not shown to scale.

12

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

BNC ACCESSORIES

DBA-600 BNC TRAY CONNECTOR

EDMO# DBA-600 MFR# DBA-600 The DBA-600 BNC tray connector can be used in place of a solder-type tray connector. Fits Bendix/King Silvercrown and other trays that also use the solder type connector. –– Nickel body and gold-plated center conductor

Blind, self-centering connector used when mounting an antenna in a panel without rear access. The 9-30-10 aligns and centers itself with its mating connector as the box is pushed into the panel for a hands-free blind mating. Use with snap ring EDMO# 310043STZD. EDMO# 9-30-10 310043STZD

MFR# 9-30-10 5100-43

DESCRIPTION tray mount RF antenna connect snap ring for 9-30-10

1

TRAY MOUNT RF CONNECTOR

SNAP RING REMOVAL & INSERTION TOOLS The SRT-1 and SRT-2 are 16 inches long and was designed to install (SRT-2) and remove (SRT-1) those hardto-get-at snap rings located in the back of avionics trays. Prevents injury to users’ fingers when removing snap rings from avionics trays. –– Color/material: plated steel –– Overall length: 6-7/8 in For more information on the SRT-1/SRT-2 snap ring removal tools, please see page 100.

EDMO# SRT-1

SRT-1 SRT-2

MFR# SRT-1 SRT-2

DESCRIPTION removal tool insertion tool

SRT-2

TNC CONNECTORS EDMO#

MFR#

TYPE

PLATING BODY/ CONTACT

COMPATIBLE CABLE TYPE

male male female male male male male female female male male

nickel/gold silver/gold silver/gold nickel/gold silver/gold nickel/gold nickel/gold nickel/gold/Delrin nickel/gold/Delrin gold/ PTFE insulation gold/PTFE insulation

58/A/C, 141, 303, LMR 195, 7806A 55, 142, 223, 400 58A, 58C, BSX 7002-58C 58A, 58C 393 142, 142A, 142B 214, 9, 9A, 9B RG58 and LMR195 RG142 RG55/RG141/RG142/RG223/ RG400 RG59/RG62

nickel/silver

RG55, RG58, RG141, RG142, RG223, RG400

CRIMP 31-2367 31-4452 225551-2 225555-2 1-225550-3 225555-6 5225555-8 RFT1212 RFT1216-C1 PE4047 PE4154

AMP31-2367 031-4452 225551-2 225555-2 1-225550-3 2255556 5225555-8 R/FRFT1212 R/FRFT1216-C1 PE4047 PE4154

male dual crimp

female dual crimp

RIGHT ANGLE SOLDER & SCREW 79075

79075

male

male right angle solder screw

RIGHT ANGLE CRIMP 1-225554-1 225554-6 225559-2 5225554-9 RFT1218

1 2255541 2255546 2255592 5225554-9 R/FRFT1218

male male male male male

silver/gold silver/gold nickel/gold silver/gold nickel/gold/Teflon

RFT1218-C1

R/FRFT1218-C1

male

nickel/gold/Teflon

EDMO DISTRIBUTORS

393 142, 142A, 142B 58A, 58C RG-9, 9A, RG-214 RG58 and LMR195 (RG58 U, Cbl Grp C; N, G, T) RG142 (RG142, 223, Cbl Grp C1)

1.800.235.3300 | edmo.com

male right angle dual crimp

13

Electrical Interconnect Connectors

1

CRIMP TOOLS FOR TNC CONNECTORS EDMO#

MFR#

EDMO#

TOOL 354940-1

MFR#

DIE 3549401

220189-3

220189-3

For more information on 354940-1, see page 107. Parts not shown to scale.

N CONNECTORS EDMO#

MFR#

TYPE

BODY / PIN / INSULATOR PLATING

COMPATIBLE CABLE TYPE

male male male male female male

silver/gold/Teflon silver/gold/Teflon silver/gold/Teflon silver/gold/Teflon silver/gold/Teflon silver/gold

RG142, RG400 RG8, RG213 RG214, UG1682/U 9913, LMR400 S, G, T, RG-8/U 9913, LMR400 RG142, RG142A, RG142B

CRIMP RFN10053C1 RFN1006-3E RFN1006-3F RFN1006-3I RFN1028-SI 225361-4

R/FRFN1005-3C1 R/FRFN1006-3E R/FRFN1006-3F R/FRFN1006-3I RFN1028-SI 225361-4

male crimp

female crimp

RIGHT ANGLE CRIMP RFN1009-C1

R/FRFN1009-C1

male

silver/gold/Teflon

RG142 and RG223

male right angle crimp

CRIMP TOOLS FOR N CONNECTORS EDMO#

MFR#

EDMO#

TOOL 58501-1

MFR#

DIE 58501-1

58485-1

58485-1

For more information on 58501-1, see page 107. Parts not shown to scale.

SMA CONNECTORS EDMO#

MFR#

GOVERNMENT/INDUSTRY PART NUMBER

TYPE

COMPATIBLE CABLE TYPE

CRIMP 225532-1 225532-3 PE4042

14

225532-1 225532-3 PE4042

M39012/55B3021 M39012/55B3022 -

male male male

58, 58A, 58B, 58C 142, 142A, 142B, 400, Belden 84142 RG55/RG141/RG142/RG223/RG400

1.800.235.3300 | edmo.com

male dual crimp

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

MFR#

GOVERNMENT/INDUSTRY PART NUMBER

TYPE

COMPATIBLE CABLE TYPE

1

EDMO#

RIGHT ANGLE CRIMP 225609-1

225609-1

M39012/56B3021

male

58, 58A, 58B, 58C

male right angle crimp

male male

RG58 and LMR195 RG142

male right angle solder screw

RIGHT ANGLE SOLDER SCREW RSA3010-C RSA3010-C RSA3010-C1 R/FRSA3010-C1

-

CRIMP TOOLS FOR SMA CONNECTORS EDMO#

MFR#

EDMO#

TOOL 354940-1

MFR#

DIE 3549401

91908-1

919081

For more information on 354940-1, see page 107. Parts not shown to scale.

UHF CONNECTORS EDMO# 226600-1 226279-1 5226600-1 RFU507-SI

MFR# 226600-1 226279-1 5226600-1 R/FRFU507-SI

TYPE male male male male

BODY/CONTACT PLATING nickel/tin nickel/tin nickel/tin silver/silver/Teflon

COAXIAL CABLE TYPE 58, 58A, 58B, 58C 58, 58A, 58B, 58C 58, 58A, 58B, 58C 9913, LMR400

male dual crimp

male single crimp

CRIMP TOOLS FOR UHF CONNECTORS EDMO#

MFR#

TOOL 354940-1

EDMO#

MFR#

DIE 3549401

91908-1

919081

For more information on 354940-1, see page 107. Parts not shown to scale.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

15

Electrical Interconnect Connectors

1

COAXIAL ADAPTERS EDMO#

MFR#

TYPE

BODY/CONTACT PLATING

STRAIGHT 31-216RFX 31-217RFX 31-218RFX 31-219 31-220NRFX 330024

031-216-RFX 031-217-RFX 31-218RFX 31-219 031-220N-RFX 31-220NRFX

31-28RFX PE9093 RFB1137 PE9006 PE9078 PE9090 PE9099 PE9154

31-28RFX PE9093 RFB1137 PE9006 PE9078 PE9090 PE9099 PE9154

RFT1230 RFT1231 RFT1232 RSA3458 RSA3476

R/FRFT1230 R/FRFT1231 R/FRFT1232 R/FRSA3458 R/FRSA3476

BNC female-N male BNC male-N female BNC male-BNC male BNC female-BNC female BNC female-BNC female BNC female-BNC female (31-220NRFX w/ a rubber washer) BNC female-UHF male BNC female-BNC female BNC female-UHF male N female-N female TNC female-SMA male TNC female-N male TNC female-TNC female TNC female-TNC female (hermetically sealed) TNC female-BNC male TNC male-BNC female TNC female-BNC female SMA male-BNC female SMA female-BNC male

nickel/silver gold/gold nickel/gold nickel/silver nickel/gold nickel/silver gold brass nickel/gold nickel/silver brass nickel/gold passivated SST/gold brass nickel/gold brass nickel/gold brass nickel/gold

BNC male-male

BNC female-female

BNC female-female bulkhead

TNC female-female bulkhead

nickel/gold nickel/gold nickel/gold nickel/gold nickel/gold

BNC female- BNC female-N male UHF male

BNC male-N female

N female-N female

BNC female-male right angle

TNC male-female right angle

BNC femalemale-female T

BNC female T

RIGHT ANGLE 31-9RFX DBFTMA-90 RFT1227

31-9RFX DBFTMA-90 R/FRFT1227

BNC female-male BNC female-male TNC male-female

nickel nickel/gold nickel/gold

T ADAPTER 31-208RFX 221988-1

31-208-RFX 221988-1

BNC female-male-female BNC female-female

nickel/gold brass nickel/gold

Don’t see what you need? We have other connectors available, so please visit our website or give us a call—we may have it in stock. If we don’t have it we can probably find it for you.

BNC/N COAXIAL ADAPTER KIT CAL TEST ELECTRONICS INC

EDMO# CT-2702 MFR# CT-2702A This kit includes 12 BNC and N-type coaxial adapters with in-series and between series adapters in a foam-lined case. Gold-plated center contacts. 50 Ω impedance. See kit contents below. QTY 1 1 1 1 1 1

16

TYPE BNC female-male-female N female-female N male-male N female-male-female N female-female-female BNC female-N male

1.800.235.3300 | edmo.com

SHAPE tee straight straight tee tee straight

QTY 1 1 1 1 1 1

TYPE

SHAPE

BNC male-N female BNC female-female BNC male-male BNC female-N female BNC female-female-female N male-female

straight straight straight straight tee right angle

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

COAXIAL ADAPTER KIT

1

CAL TEST ELECTRONICS INC

EDMO# CT-2701A MFR# CT-2701A 30-piece coaxial adapter kit with nickel-plated adapter bodies. 50 Ω impedance. See kit contents below. QTY 6 2 2 1 1 2

TYPE BNC male BNC female F male F female N male

STYLE

QTY

universal coax coax coax coax coax

2 1 1 1 1 2

TYPE N female RCA male RCA female SM male SMA female TNC male

STYLE coax coax coax coax coax coax

QTY 2 2 2 1 1

TYPE TNC female UHF male UHF female mini UHF male mini UHF female

STYLE coax coax coax coax coax

CPC CONNECTORS Molded plastic CPC connectors provide a substantial savings in both weight and cost because of their plastic shells. Multiple shell sizes, densities, and configurations are available.

SERIES 1 CONNECTORS

male square flange receptacle

Series 1 CPC connectors use size 16 contacts. Pins and sockets are available in two AWG sizes: 24-20 AWG and 18-16 AWG. Pins and sockets have been tested up to 13 amperes. Series 1 connectors cannot be mated with series 2.

male free-hanging receptacle

female plug

PINS

SHELL SIZE

FEMALE PLUG

MALE SQUARE FLANGE RECEPTACLE

MALE FREE-HANGING RECEPTACLE

STANDARD SEX CONNECTORS 4 9 16 24 37

11 13 17 23 23

206060-1 206708-1 206037-1 206837-1 206150-1

206061-1 206705-1 206036-1 206838-1 206151-1

206153-1 206705-2 206036-3 206838-2 206151-2

female square flange receptacle

female free-hanging receptacle

male plug PINS

SHELL SIZE

MALE PLUG

FEMALE SQUARE FLANGE RECEPTACLE

FEMALE FREE-HANGING RECEPTACLE

REVERSE SEX CONNECTORS 4 14 37

11 17 23

206429-1 206044-1 206305-1

EDMO DISTRIBUTORS

206430-1 206043-1 206306-1

206430-2 206043-3 206306-2

1.800.235.3300 | edmo.com

17

Electrical Interconnect

1

Connectors

standard numbered female plug PINS

SHELL SIZE

reverse numbered female plug

male feed-through receptacle

STANDARD NUMBERED FEMALE PLUG

MALE FEED-THROUGH RECEPTACLE:

REVERSE NUMBERED FEMALE PLUG

FEED THROUGH CONNECTORS 4 16

11 17

206060-1 206037-1

206518-2 206552-1

206516-1 206554-1

CPC CABLE CLAMPS FOR SERIES 1 CPC CONNECTORS EDMO# 1-206062-4 206966-7 206070-8 206138-8

MFR#

SHELL SIZE

1-206062-4 206966-7 206070-8 206138-8

11 13 17 23, M41

CABLE INSULATION DIAMETER 8.36 mm 17.86 mm 11.51 mm 17.86 mm

THREAD SIZE 5/8 - 24 3/4 - 20 15/16 - 20 1-3/8 - 18

1-206062-4

PINS FOR SERIES 1 MALE CPC CONNECTORS EDMO# 66103-4 66099-1 66099-4 66103-1

MFR# 66103-4 66099-1 66099-4 66103-1

AWG 24/20 18/16 18/16 24/20

FINISH sel/gold/nickel gold/nickel sel/gold/nickel gold/nickel

Sold in quanties of 100.

206138-8

SOCKETS FOR SERIES 1 FEMALE CPC & FEED-THROUGH CONNECTORS EDMO# 66105-1 66105-4 66101-1 66101-4

MFR# 66105-1 66105-4 66101-1 66101-4

AWG 24/20 24/20 18/16 18/16

FINISH gold/nickel sel/gold/nickel gold/nickel sel/gold/nickel

Sold in quanties of 100.

CRIMP TOOL FOR CPC CONNECTORS

EDMO# 58495-1 MFR# 584951 Pro-Crimper II Tool for pins and sockets. Comes with 16/28 die.

EXTRACTION TOOL

EDMO# 305183 MFR# 305183 The AMP extraction tool for connector pins. Contact sizes 20-24 AWG.

INSERTION TOOL

EDMO# 91002-1 MFR# 910021 The AMP insertion tool for connector pins. Contact sizes 20-24 AWG. For more information on 58495-1, see page 107; for 305183 see page 102; and for 91002-1, see page 101.

18

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

SERIES 2 CPC CONNECTORS

PINS

SHELL SIZE

1

male square flange receptacle

Series 2 CPC connectors accept size 20 pin and socket contacts (the same size contacts that are used with subminiature “D” connectors). Pins and sockets are available in AWG size 24-20. Maximum current carrying capability is 7.5 amperes. Series 1 connectors cannot be mated with series 2.

male free-hanging receptacle female plug

FEMALE PLUG

MALE SQUARE FLANGE RECEPTACLE

MALE FREE-HANGING RECEPTACLE

STANDARD SEX CONNECTORS 8 9 28

11 11 17

205838-1 206485-1 205839-3

205841-1 206486-1 205840-3

205841-2 206486-2 206152-1

female square flange receptacle

female free-hanging receptacle

male plug

PINS

SHELL SIZE

MALE PLUG

FEMALE SQUARE FLANGE RECEPTACLE

FEMALE FREE-HANGING RECEPTACLE

REVERSE SEX CONNECTORS 8 28

11 17

206434-1 206039-1

206433-1 206038-1

standard numbered female plug PINS

SHELL SIZE

206433-2 206038-2

reverse numbered female plug

male feed-through receptacle

STANDARD NUMBERED FEMALE PLUG

MALE FEED-THROUGH RECEPTACLE:

REVERSE NUMBERED FEMALE PLUG

FEED THROUGH CONNECTORS 8 28

11 17

205838-1 206125-1

206458-1 206127-1

206460-1 206126-1

CPC CABLE CLAMPS FOR SERIES 2 CPC CONNECTORS EDMO# 1-206062-4 206966-7 206070-8 206138-8

MFR# 1-206062-4 206966-7 206070-8 206138-8

SHELL SIZE 11 13 17 23, M41

CABLE INSULATION DIAMETER 8.36 mm 17.86 mm 11.51 mm 17.86 mm

THREAD SIZE 5/8 - 24 3/4 - 20 15/16 - 20 1-3/8 - 18

1-206062-4

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

206138-8

19

Electrical Interconnect Connectors

SOCKETS FOR SERIES 2 FEMALE & FEED THROUGH CONNECTORS

1

PINS FOR SERIES 2 MALE CPC CONNECTORS EDMO# 205089-1 1-66506-0

MFR# 205089-1 1-66506-0

AWG 24/20 24/20

FINISH

EDMO#

gold/closed barrel gold/open barrel

MFR#

AWG

205090-1 205090-1 24/20 1-66504-0 1-66504-0 24/20

FINISH gold/closed barrel gold/open barrel

sold per 100

CRIMP TOOLS FOR CPC SERIES 2 CONNECTORS

sold per 100

INSERTION/EXTRACTION TOOL

EDMO# AFM8 MFR# AFM8 Daniels Crimp tool.

EDMO# 91285-1 MFR# 91285-1 Insertion and extraction tool with interchangeable tips for use with HD-22 and HD-20 contacts. Includes a handle, six tips, a hex wrench, and a plug. Each plug is color-coded according to specific type and wire size. CONTACT SIZE HD-20 HD-20 HD-20 HD-20 HD-20 HD-22

EDMO# 58448-2 MFR# 58448-2 Pro-Crimper II Tool (comes with die set)

POSITIONER FOR AFM8

AWG

INSERTION/EXTRACTION TIPS

28/20 24/18 28/24 posted posted 28/22

COLOR

TYPE

yellow red brown blue black green

insertion extraction extraction extraction insertion insertion/extraction

EXTRACTION TOOL

EDMO# K13-1 MFR# K13-1

EDMO# 91067-2 MFR# 91067-2 Pin and socket extraction tool.

For more information on the AFM8, see page 103; for 58448-2 see page 107, Find information on the 91285-1 extraction tool on page 102; for 91067-2, see page 99.

METRIMATE CONNECTORS

EDMO#

MFR#

DIMENSIONS

# OF PINS

EDMO#

PLUG 207015-1 207152-1 207439-1 207017-1 207442-1 207304-1 207019-1

MFR#

DIMENSIONS

# OF PINS

RECEPTACLE 207015-1 207152-1 207439-1 207017-1 207442-1 207304-1 207019-1

0.799 × 0.712 0.988 × 0.712 0.988 × 0.945 1.181 × 0.945 1.594 × 0.945 1.594 × 1.114 2.185 × 1.114

4 6 9 12 18 24 36

4-pin plug and receptacle

207016-1 207153-1 207440-1 207018-1 207443-1 207305-1 207020-1

207016-1 207153-1 207440-1 207018-1 207443-1 207305-1 207020-1

0.799 × 0.712 0.988 × 0.712 0.988 × 0.945 1.181 × 0.945 1.594 × 0.945 1.594 × 1.114 2.185 × 1.114

4 6 9 12 18 24 36

18-pin plug and receptacle

PINS FOR METRIMATE CONNECTORS EDMO# 66103-1 66103-4 66099-1 66099-4

20

MFR# 66103-1 66103-4 66099-1 66099-4

AWG 24/20 24/20 18/16 18/16

FINISH gold/nickel sel/gold/nickel gold/nickel sel/gold/nickel

1.800.235.3300 | edmo.com

SOCKETS FOR METRIMATE CONNECTORS EDMO# 66105-1 66105-4 66101-1 66101-4

MFR# 66105-1 66105-4 66101-1 66101-4

AWG 24/20 24/20 18/16 18/16

FINISH gold/nickel sel/gold/nickel gold/nickel sel/gold/nickel

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

CRIMP TOOL FOR METRIMATE CONNECTORS

EXTRACTION TOOL

EDMO# 305183 MFR# 305183 The AMP extraction tool for connector pins. Contact sizes 20-24 AWG.

1

EDMO# 58495-1 MFR# 58495-1 Pro-Crimper II Tool (comes with die set)

INSERTION TOOL

EDMO# 91002-1 MFR# 910021 The AMP insertion tool for connector pins. Contact sizes 20-24 AWG. For more information on 58495-1, see page 107; for 305183 see page 102; and for 91002-1, see page 101.

MATE-N-LOK CONNECTORS Mate-N-Lok connectors are constructed with fully polarized nylon housings and provide easy cavity identification. Locking devices, built-in contact stabilization, and self-aligning features keep the connector halves securely in place while a hot side egg-crate design promotes safety. –– Durable, locking design holds together under severe conditions of vibration and shock –– Low insertion/extraction forces, accepts size range of 30-14 AWG (2-inch centerline) –– Wire to PC board capability using pin or socket headers –– Solderability headers meet MIL-STD 202 method 208 Mate-N-Lok Diagram

MOTOR MOUNT EDMO#

MFR#

# OF PINS

EDMO#

PIN HOUSING 1-480271-0 1-480284-0 1-480286-0 1-480288-0 1-480439-0

MFR#

# OF PINS

SOCKET HOUSING 1-480271-0 1-480284-0 1-480286-0 1-480288-0 1-480439-0

6 8 10 12 16

pin housing 16-pin

1-480270-0 1-480283-0 1-480285-0 1-480287-0 1-480438-0

1-480270-0 1-480283-0 1-480285-0 1-480287-0 1-480438-0

6 8 10 12 16

socket housing 16-pin

FREE HANGING EDMO#

MFR#

# OF PINS

EDMO#

PIN HOUSING

MFR#

# OF PINS

SOCKET HOUSING

1-480350-0 1-480319 1-480305-0

1-480350-0 1-480319 1-480305-0

1 2 3

1-480426-0 1-480271-0 1-480345-0 1-480286-0

1-480426-0 1-480271-0 1-480345-0 1-480286-0

4 6 8 10

pin housing 4-pin

1-480349-0 1-480318 1-480303-0 1-480424-0 1-480270-0 1-480283-0 1-480285-0

1-480349-0 1-480318 1-480303-0 1-480424-0 1-480270-0 1-480283-0 1-480285-0

1 2 3 4 6 8 10

socket housing 4-pin

PANEL MOUNT EDMO#

MFR#

# OF PINS

EDMO#

PIN HOUSING 1-480305-0 1-480426-0 1-480276-0 1-480277-0 1-480278-0

MFR#

# OF PINS

SOCKET HOUSING 1-480305-0 1-480426-0 1-480276-0 1-480277-0 1-480278

3 4 6 9 12

EDMO DISTRIBUTORS

pin housing 9-pin

1-480304-0 1-480425-0 1-480273-0 1-480274-0 1-480275-0

1-480304-0 1-480425-0 1-480273-0 1-480274-0 1-480275-0

3 4 6 9 12

1.800.235.3300 | edmo.com

socket housing 9-pin

21

Electrical Interconnect Connectors

1

PINS FOR MATE-N-LOK PIN HOUSINGS EDMO# 60618-1 60618-4 60618-5 60620-1 60620-4 60620-5

MFR#

AWG

60618-1 60618-4 60618-5 60620-1 60620-4 60620-5

24/18 24/18 24/18 20/14 20/14 20/14

FINISH

EDMO#

brass/tin phosphor bronze/tin brass gold/nickel plate brass/tin phosphor bronze/tin brass gold/nickel plate

MATE-N-LOK CONNECTORS CRIMP TOOLS Certi-Crimp II crimp tool.

EDMO# 91512-1 91504-1

SOCKETS FOR MATE-N-LOK SOCKET HOUSINGS

MFR#

AWG

91512-1 91504-1

24-18 20-14

60617-1 60617-4 60617-5 60619-1 60619-4 60619-5

MFR# 60617-1 60617-4 60617-5 60619-1 60619-4 60619-5

AWG

FINISH

24/18 24/18 24/18 20/14 20/14 20/14

brass/tin phosphor bronze/tin brass gold/nickel plate brass/tin phosphor bronze/tin brass gold/nickel plate

EXTRACTION TOOL FOR MATE-N-LOK CONTACTS EDMO# 305183 MFR# 305183

Extracts Mate-N-Lock contacts from housing cavities. Consists of a push button, push rod, handle, and sleeve. The sleeve is inserted into the mating face of the housing, depressing the locking lances of the crimped contact, and allowing the contact to be extracted from the wire-entry face of the housing.

For more information, see the Certi-Crimp II on page 109 and 305183 on page 102.

D CONNECTORS HDP-20 CRIMP SNAP-IN CONTACT CONNECTORS HDP-20 crimp snap-in contact connectors provide a wide choice of contact positions (9, 15, 25, 37 and 50) and they are intermateable with any size 20 subminiature D connector dimensionally complying with MIL-C-24308. Constructed with a steel shell and zinc plating.

PLUGS EDMO# 205204-9 205206-9 5205208-1 205210-8 1658641-3

RECEPTACLES MFR# 205204-9 205206-9 5205208-1 205210-8 16586413

SHELL SIZE 1 2 3 4 5

# OF PINS 9 15 25 37 50

EDMO# 205203-8 205205-7 5205207-1 205209-7 1658640-2

MFR# 205030-8 205205-7 5205207-1 205209-7 16586402

SHELL SIZE 1 2 3 4 5

# OF PINS 9 15 25 37 50

Not finding what you need? Did you know that EDMO has a large inventory of install tools? Be sure to check out our Tools section in this catalog. If you don’t see what you need there, it’s likely we have it, or can order it in for you. As always, give us a call at 1.800.235.3300 for parts and pricing.

22

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Connectors

HDP-20 CRIMP SOLDER CUP CONTACT CONNECTORS

PLUGS EDMO# 747904-4 747908-4 747912-4 747916-4

RECEPTACLES MFR#

SHELL SIZE

747904-4 747908-4 747912-4 747916-4

# OF PINS

1 2 3 4

EDMO#

9 15 25 37

747905-4 5-747909-2 747913-4 5-747917-2

PINS FOR D CONNECTOR PLUGS EDMO# 205089-1 1-66506-0

1

Solder cup connectors have preloaded duplex-plated solder cup contacts finished with a shell of either standard zinc or tin. The HDP-20s can be connected with other subminiature D connectors and are available in 9, 15, 25 and 37 position (shell sizes 1-4) plugs and receptacles—and they can be easily installed without special application tools.

MFR# 205089-1 1-66506-0

AWG 24/20 24/20

MFR# 747905-4 5-747909-2 747913-4 5-747917-2

SHELL SIZE 1 2 3 4

# OF PINS 9 15 25 37

SOCKETS FOR D CONNECTOR RECEPTACLES

FINISH

closed barrel

gold gold

EDMO# 205090-1 1-66504-0

MFR# 205090-1 1-66504-0

AWG 24/20 24/20

closed barrel

FINISH gold gold

open barrel

CRIMP TOOLS FOR D CONNECTORS

open barrel

INSERTION/EXTRACTION TOOL

EDMO# AFM8 MFR# AFM8 Daniels Crimp tool.

EDMO# 91285-1 MFR# 91285-1 Insertion and extraction tool with interchangeable tips for use with HD-22 and HD-20 contacts. Includes a handle, six tips, a hex wrench, and a plug. Each plug is color-coded according to specific type and wire size. EDMO#

EDMO# 58448-2 MFR# 58448-2 Pro-Crimper II Tool (comes with die set)

CONTACT SIZE

AWG

COLOR

TYPE

543382-5 1-543382-0 1-543382-1 543382-6 543382-7

HD-20 HD-20 HD-20 HD-20 HD-20

28/20 24/18 28/24 posted posted

yellow red brown blue black

insertion extraction extraction extraction insertion

543382-8

HD-22

28/22

green

insertion/ extraction

POSITIONER FOR AFM8

EXTRACTION TOOL

MALE SCREW RETAINER FOR D CONN

SLIDE LATCH CLIP FOR D CONN

EDMO# K13-1 MFR# K13-1

EDMO# 5205980-1 MFR# 5205980-1 Male screw retainer kit for use with metal shell connectors (HDE and HDP). Each kit screws and two retaining clips.

INSERTION/EXTRACTION TIPS

EDMO# 91067-2 MFR# 91067-2 Pin and socket extraction tool.

includes two

EDMO# 5206942-1 MFR# 5206942-1 Slide latch clip for D-connectors. male

For more information on the AFM8, see page 103, for 58448-2 see page 107, for 92185-1 see page 100, and for 91067-2, see page 99.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

23

Electrical Interconnect Connectors

1

D CONNECTOR CABLE CLAMPS EDMO# 5205729-1 5205730-1 5205718-1 5205731-1 5205732-1

MFR# 5205729-1 5205730-1 5205718-1 5205731-1 5205732-1

# OF PINS 9 15 25 37 50

FEMALE SCREW LOCKS Female screw lock assembly kits for D connectors. Each kit contains two assemblies. 4-40 thread size

SHELL SIZE 1 2 3 4 5

EDMO# 5205817-1 5205817-3

MFR# 52058171 5205817-3

BODY FINISH yellow chromate clear chromate

Not finding what you need? Did you know that EDMO has a large inventory of pins and sockets, including a lineup of Mil-Spec contacts? If you don’t see what you need here, it’s likely we have it, or can order it in for you. Call today for parts and pricing at 1.800.235.3300.

GROUNDING BLOCK ASSEMBLY For installing and grounding wire to an aircraft frame, this 14-pin grounding block mates with standard 6, 14- or 34-position connector housings and has size 16 screw-machined pin contacts that are staked, riveted, and soldered into the L-shaped metal bracket. Tin-plated brass construction with stainless steel clinch nuts and phosphor bronze gold over nickel-plated pin contacts.

GROUNDING BLOCKS EDMO# 203540-1 204814-1

MFR# 203540-1 204814-1

PINS FOR D CONNECTOR PLUGS # OF PINS 14 34

EDMO# 14-pin grounding block

34-pin grounding block

14-pin receptacle

34-pin receptacle

RECEPTACLES EDMO#

MFR#

201298-1 200838-2

2012981 2008382

66105-1 66105-4 66101-1 66101-4

MFR# 661051 661054 661061 661014

AWG 24/20 24/20 18/16 18/16

FINISH gold/nickel sel/gold/nickel gold/nickel sel/gold/nickel

# OF PINS 14 34

CRIMP TOOL FOR GROUNDING BLOCK ASSEMBLIES EDMO# 58495-1 MFR# 58495-1 Pro-Crimper II Tool (comes with die set for 28-16 GA open barrel pins and sockets)

MALE JACKSCREW ASSEMBLY EDMO# 203618-1 MFR# 203618-1

For information about 58495-1, see page 107.

SOCKET GROUNDING MODULE WITH FLANGE EDMO# M81714/63MFR# M81714/63-22F Flange-mount, socket grounding module mounts directly to a ground plane or ground lug, creating a multi-wire sealed grounding device. This unit may also be mounted to a bus bar for power distribution, sensing, or metering. –– Size 20 contact –– Gold flange

24

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Terminals & Splices

1

TERMINALS & SPLICES PIDG TERMINALS & SPLICES Pre-insulated diamond grip (PIDG) ring tongue terminals consist of a precision-formed metal wire barrel and a copper sleeve encased in insulating material made of nylon, polyvinyl chloride (PVC), or polyvinyl fluoride (PVF2). The wire barrel contains serrations that provide maximum contact and tensile strength after crimping the terminal, splice, or end cap onto the wire. Each terminal has a color-coded body that indicates the applicable wire range (to help reduce errors during installation).

PIDG (RING) TERMINALS EDMO# 31880 320553 36150 36151 36152 51863 31886 31890 320551 320554 2-36153-3 36154 31894 320571 31895 31897 328975 328996 326882 36158

MFR# 31880 320553 36150 36151 36152 51863 31886 38190 320551 320554 2-36153-3 36154 31894 320571 31895 31897 328975 328996 326882 36158

STUD SIZE 4 4 6 6 6 6 8 8 8 8 10 10 1/4 1/4 5/16 3/8 1/2 4 6 6

AWG 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22 22-16 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14

COLOR

EDMO#

red red red red red red red red red red red red red red red red red blue blue blue

320619 32059 51864-1 320565 36160 51864-2 321045 328998 328999 35107 35149 35108 35109 35110 320569 35111 35112 35151 323986

MFR# 320619 32059 51864-1 320565 36160 51864-2 321045 328998 328999 35107 35149 35108 35109 35110 320569 35111 35112 35151 323986

STUD SIZE 6 8 8 8 10 10 1/4 5/16 3/8 6 6 8 10 1/4 1/4 5/16 3/8 1/2 6

AWG 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 12-10 12-10 12-10 12-10 24-20

COLOR blue blue blue blue blue blue blue blue blue yellow yellow yellow yellow yellow yellow yellow yellow yellow natural

PIDG SPLICES EDMO#

MFR#

AWG

320559 320562 323994 320570 323975 327583

320559 320562 323994 320570 323975 327583

EDMO#

COLOR

BUTT SPLICES 22-16 16-14 26-24 12-10 24-20 16-14, 22-18

red blue yellow yellow natural natural

butt splices

MFR#

AWG

COLOR

KNIFE SPLICES 320555 32446 32448 320620 35762

320555 32446 32448 320620 35762

22-16 16-14 16-14 12-10 12-10

red red blue yellow yellow

knife splices EDMO#

MFR#

AWG

COLOR

END SPLICES 324485 328307 324486 328308 324487 324484 35115

324485 328307 324486 328308 324487 324484 35115

22-16 22-18 16-14 16-14 10-12 26-16 22-14

EDMO DISTRIBUTORS

red red blue blue yellow transparent transparent

end splices

1.800.235.3300 | edmo.com

25

Electrical Interconnect Terminals & Splices

1

PIDG QUICK DISCONNECT TABS & RECEPTACLES PIDG FASTON receptacles are pre-insulated and consist of a tin-plated brass body with a copper sleeve fitted over the terminal barrel. Color-coded to indicate wire size range suitable for the receptacle. Quick disconnect PIDG FASTON tabs are solid metal tabs with plastic insulation on the crimp end. The metal support sleeve under the insulation crimps tightly onto the wire insulation and provides wire strain relief in high vibration environments. Color-coded insulation for easy visual identification. EDMO#

MFR#

RECPT. SIZE

AWG

COLOR

EDMO#

RECEPTACLES 640903-1 640911-1 640917-1 640923-1 640905-1 640913-1 640919-1 640929-1 640907-1

640903-1 640911-1 640917-1 640923-1 640905-1 640913-1 640919-1 640929-1 640907-1

0.250 0.205 0.187 0.110 0.250 0.205 0.187 0.110 0.250

MFR#

SIZE

AWG

66023-2 66024-2 66025-2

0.250 0.250 0.250

22-16 16-14 12-10

COLOR

TABS 22-18 22-18 22-18 22-18 16-14 16-14 16-14 16-14 12-10

66023-2 66024-2 66025-2

red red red red blue blue blue blue yellow

red blue yellow

INSULATED WRISTLOCK DISCONNECTS

NIPPLE ELECTRICAL TERMINALS

EDMO# RA18D MFR# RA18D Insulated nylon wristlock disconnects for wire range 22-18.

Silicone electrical nipple-type terminals. Rubber and silicone construction.

EDMO# material/finish: color: wire range: max. insulation: length:

brass/electro-tin red 22-18 0.136 0.99

MS25171-1 MS25171-2 MS25171-3 MS25171-4

MFR# MS25171-1S MS25171-2S MS25171-3s MS25171-4S

WIRE DIA. 0.160 0.310 0.430 0.560

PLASTI-GRIP SPLICES PLASTI-GRIP terminals and splices are inexpensive, pre-insulated electrical terminations that can be use in almost every type of commercial application, accommodating wire sizings from 22 to 2/0 AWG. PLASTI-GRIP terminals are constructed with a vinyl insulation sleeve that provides good dielectric strength while supporting the wire insulation so that no bare wire is exposed (94V-0 rated). See table below for applicable tools.

EDMO# 34070 34071

CRIMP TOOLS FOR PIDG TERMINALS & SPLICES

DIES

EDMO# 30-500 MFR# 30-500

EDMO# 30-572 MFR# 30-572

MFR# 34070 34071

AWG 22-16 16-14

COLOR red blue

EDMO# 58433-3 MFR# 58433-3

EDMO# 169400 MFR# 169400

EDMO# 169404 MFR# 169404

EDMO# HX4 MFR# HX4

EDMO# Y501 MFR# Y501

For more information on 30-500, see page 107; for 58433-3, see page 107; for 169400, see page 105; for HX4, see page 104. Parts not shown to scale.

26

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Terminals & Splices

TERMINYL TERMINALS

EDMO# 324043 324044 324045 324054 324046

MFR# 324043 324044 324045 324054 324046

STUD SIZE 10 5/16 3/8 3/8 10

AWG 8 8 8 2 6

COLOR

EDMO#

red red red red blue

324047 324048 324049 324057 324050

MFR# 324047 324048 324049 324057 324050

STUD SIZE 1/4 5/16 3/8 3/8 1/4

AWG 6 6 6 1 4

1

TERMINYL splices and terminals are designed for the larger wire sizes used in airborne and ground support applications. TERMINYL products withstand vibration, shock and structural stresses, elevated temperatures and other conditions that can adversely affect the circuit requirements in aviation equipment. Pre-insulated with color-coded nylon and constructed with fine grade, high-conductivity copper with corrosion-resistant plating. –– Meets or exceeds the requirements of MIL-T-7928, Type 11, class 2. COLOR blue blue blue blue yellow

SOLISTRAND TERMINALS & SPLICES SOLISTRAND TERMINALS SOLISTRAND terminals and splices are used to terminate solid and stranded wire and irregular shaped conductors. Constructed with high-conductivity copper that’s electro-tinned for improved corrosion resistance. SOLISTRAND terminals consist of a completely closed barrel with serrations inside that provide optimum tensile strength and maximum electrical contact after crimping. The barrel has a conical entry for easy wire insertion. For use with regular wire/cable types.

EDMO# 33460 33461 33462 33463 321298 321598 33465 33466 33467 33468 33469 321060 33470 33471

MFR# 33460 33461 33462 33463 321298 321598 33465 33466 33467 33468 33469 321060 33470 33471

STUD SIZE 10 1/4 5/16 3/8 10 1/4 1/4 5/16 3/8 10 1/4 5/16 5/16 3/8

AWG 8 8 8 8 6 6 6 6 6 4 4 4 4 4

EDMO#

33461

33469

33463

321298

35668 327175 320383 36922 322870 321600 36923 36925 320741 36916 36917 36918 36919

MFR# 35668 327175 320383 36922 322870 321600 36923 36925 320741 36916 36917 36918 36919

STUD SIZE 1/2 1/2 1/4 5/16 5/16 3/8 3/8 1/2 7/16 5/16 3/8 7/16 1/2

AWG 4 4 2 2 2 2 2 2 2 1 1 1 1

321298

SOLISTRAND BUTT SPLICES EDMO# 34321 34322 34323 35189 36958

MFR# 34321 34322 34323 35189 36958

AWG 8 6 4 2 2

36958

34322

34323

CRIMP TOOLS FOR TERMINYL/SOLISTRAND TERMINALS & SPLICES EDMO# 601075, 601075-1 MFR# 601075, 601075-1

EDMO# 600850 MFR# 600850

For information on 601075, 601075-1, and 600850 see page 108.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

27

Electrical Interconnect Solder Sleeves & Jackets

1

ENVIRONMENT-RESISTANT SPLICES MiniSeal wire-to-wire, environment-resistant splices consist of a plated copper crimp barrel and a separate, heat-shrinkable, transparent sealing sleeve. They can be used on a combination of wires, from 1:1 to 10:10. They preserve the electrical integrity of the splice as they are immersion-resistant and completely insulated to protect electrical connections from water, condensation, salt, and corrosion. Provides strain relief and helps prevent wire pullout and vibration in the most rugged environments. Qualified to MIL-S-81824/1. –– Available as stub (parallel splices) or butt (in-line) splices –– Crimp barrel can only be used to create an immersion-resistant two-wire stub splice or a 2:1 parallel splice having insulations rated to 135°C minimum EDMO#

MFR#

CRIMP BARREL SIZE RANGE

PLATING MATERIAL

CMA min-max

SIDE 1 (ID DIMENSIONS) (IN)

stub (parallel) splices

butt (in-line) splices

SIDE 2 (ID DIMENSIONS) (IN)

sealing insert

max no. of wires

sealing insert

max no. of wires

COLOR

STUB (PARALLEL SPLICES) D-436-0128

D-436-0128

304 - 1510

tin

2.16

2

1.01

2

red

304-1510 779-2680 304 - 1510 779 - 2680 1900 - 6755 1900 - 6755 779 - 2680 1900-6755 779 - 2680 1900 - 6755

nickel nickel tin tin tin nickel tin tin tin tin

2.16 2.79 2.16 2.79 4.32 4.32 2.36 2.36 2.36 2.36

2 2 2 2 2 2 6 (2 per hole) 6 (2 per hole) 6 (2 per hole) 6 (2 per hole)

2.16 2.79 2.16 2.79 4.32 4.32 4.06 4.06 2.36 2.36

2 2 2 2 2 2 2 2 6 (2 per hole) 6 (2 per hole)

red blue red blue yellow yellow blue yellow blue yellow

BUTT (IN-LINE) SPLICES D-436-82 D-436-83 D-436-36 D-436-37 D-436-38 D-436-84 D-436-52 D-436-53 D-436-42 D-436-43

650126-000 650127-000 D-436-36 D-436-37 D-436-38 D-436-84 D-436-52 D-436-53 D-436-42 D-436-43

CRIMP TOOL FOR ENVIRONMENT-RESISTANT SPLICES GMT232

GMT232

Commercial Crimp Tool AD-1377

For more information on GMT232, see page 104. Images not shown to scale. Can’t find the size you need? Call us at 1.800.235.3300. If we don’t have it in stock, we can usually get it for you.

SOLDER SLEEVES & JACKETS SOLDER TERMINATION SLEEVES EDMO#

S01-05-R

H-M-5

Solder termination sleeves consisting of an outer, heat-shrinkable jacket crafted with a precision-engineered polyvinylidene fluoride sleeve that contains just the right amount of pre-fluxed solder—assuring reliable connections with each use. During the shrinking process, the tubes’ thermoplastic sealing rings melt and flow to strain-relieve and create an environmental seal that meets SAE-Spec criteria. The solder preform is coated with a special thermochromic indicator that changes color when the necessary amount of heat has been applied.

S01-01-R H-M-1 S01-02-R H-M-2 S01-03-R H-M-3 S01-04-R S01-05-R H-M-5

MFR#

MIL-SPEC

665143-000 189-10176 642145-000 H-M-2 775210-000 H-M-3 346656-000 S01-05-R H-M-5

M83519/1-1 M83519/1-1 M83519/1-2 M83519/1-2 M83519/1-3 M83519/1-3 M83519/1-4 M83519/1-5 M83519/1-5

MAX DIA. 0.105 0.105 0.145 0.145 0.200 0.200 0.255 0.300 0.300

Not finding what you need? EDMO has a large inventory of solder supplies. If you don’t see what you need here, check out our website at edmo.com. It’s likely we have what you need on hand and if we don’t, we can almost always get it for you. Give us a call at 1.800.235.3300 for parts and pricing.

28

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Electrical Interconnect Solder Sleeves & Jackets

HIGH/LOW TEMPERATURE SOLDER SLEEVES EDMO# H-C-2

L-C-5

MFR#

1

High and low temperature solder sleeves designed for terminating wire and cable with tin-coated or silver-plated shields with either high temperature cable insulation 125°C + (STS H-C) or low temperature insulation 105°C + (STS L-C). For use with convection (hot air heating) tools. Constructed with heat-shrinkable, modified polyvinylidene fluoride tubing with meltable sealing rings. –– Eutectic point of solder: 183°C (H-C-x) / 143°C (L-C-x) –– Operating temperature range: -55°C to +150°C (H-C-x) / -55°C to +105°C (L-C-x)

MAX DIA.

HIGH TEMPERATURE (CONVECTION 150°C) H-C-2

STS H-C-2

0.125

LOW TEMPERATURE (CONVECTION 105°C) L-C series, end stripped

L-C-1 L-C-2 L-C-3 L-C-4 L-C-5

189-10274 189-10282 STS L-C-3 L-C-4 STS L-C-5

0.095 0.125 0.200 0.250 0.300

L-C series, used as butt splice

L-C series, center stripped

SOLDER SLEEVES WITH PRE-INSTALLED LEADS Similar to the H-C-x and L-C-x series but has pre-installed ground leads. Intended for cables having tin or silver-plated shields (class I). EDMO# HML-5

HML-1 HML-2 HML-3 HML-4 HML-5 HML-6

MFR# STS H-ML-1 HML-2 STS H-ML-3 H-ML-4 HML-5 H-ML-6

MAX DIA. 0.105 0.145 0.200 0.255 0.300 0.105

AWG

EDMO#

20 20 20 20 20 22

HML-7 HML-8 HML-9 HML-11 HML-12 HML-13

MFR# H-ML-7 H-ML-8 HML-9 STS H-ML-11 STS M-ML-12 STS HML-13

MAX DIA. 0.145 0.200 0.255 0.105 0.145 0.200

AWG 22 22 22 24 24 24

HML series, center stripped

HEAT GUNS STEINEL HEAT GUN

HL2010E HEAT GUN/LCD TEMP DISPLAY

STEINEL AMERICA, INC.

STEINEL AMERICA, INC.

EDMO# HL1910E MFR# 34830 The powerful HL 1910 E heat gun provides variable temperature and electronic thermocouple control for flexible use and maximum reliability. A reliable DuraTherm™ heating element ensures even heating with pinpoint reduction of heat output.

EDMO# HL2010E MFR# HL2010E The HL 2010 E heat gun is controlled by a microprocessor and has an LCD screen display that allows the user to select the temperature in 10°F increments. Heating is provided by a DuraTherm™ heating element that provides even heating.

LIGHTWEIGHT HEAT GUN WITH NOZZLES

1095 DUAL TEMP HEAT GUN

WELLER

EDMO# 6966C MFR# 6966C Heat gun designed for assembly and repair applications in production plants, labs and service shops. Ideal for shrink tubing and vinyl/ TFE epoxy curing, drying and cooling. Users can select temperature with the three-position switch (hot-off-cool). –– 3-wire grounded plug with a six-foot power cord –– UL and cUL listed

UNGAR The Ungar heat gun is a dual-temperature, flameless heat-treating tool. It provides temperature range between 1200°F and 790°F. Durable, impact resistant polymer housing with a hanging ring and built-in stand. EDMO# 1095 1080 1082

MFR# 1095 1080W 1082W

DESCRIPTION dual temp heat gun stainless steel reducer nozzle stainless steel reflector

FLAMELESS HEAT SHRINK GUN

EDMO# MJ-600 MFR# MJ-600 This auto-ignition, flameless heat shrink gun can be powered by a normal cigarette lighter. Consists of a Piezo electronic ignition system with safety locking switch. Powered by an Iroda RC-30 refillable fuel cell (or any disposable cigarette lighter). It’s ideal for installing heat shrink and solder filled connectors flamelessly and provides heat temperatures up to 1300°F (650°C) For more information on HL1910E, see page 112; HL2010E page 100; 6966C page 113; 1095 page 113; and MJ-600 page 113.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

29

Electrical Interconnect

1

Plugs & Jacks

PLUGS & JACKS Refer to the following plug and jack compatibility diagrams when ordering parts. Part numbers and descriptions on the following pages. Not seeing the parts you need? Call us today at 1.800.235.3300 for part information and assistance. TABLE 1. SWC 11 (JJ034) SWC C11X (mil spec JJ034 with key)

TABLE 4.

SWC S12B (JJ033)

SWC C12BX (JJ033)

SWC 440X (PJ0558)

SWC 80

SWC 480X (PJ-068)

SWC S830

TABLE 5.

TABLE 2.

SWC 112BX (stereo)

MP-101 (U 173/U) SWC 260 (stereo)

SWC 12B (stereo)

MJ-101 (U 172/U)

U 75/U

U 61/U

TABLE 3.

TJT-120 (U 92B/U panel mount)

TABLE 6. 27-655 mini stereo jack

TJT-102 (U 92B/U panel mount)

27-060 mini stereo plug

TABLE 7.

TP-101 (U 174/U)

SWC 750 mini phone plug (mono)

SWC 41 mini phone jack (mono)

TJ-120 (U 92B/U-R) panel mount

TABLE 8.

TP-120 (U174/U)

TJ-101 TJ-102 (U 92A/U free hang)

TP-102 (U 93A/U) free hang

TJS-102 (with clip) free hang W/PTT

EDMO#

30

SWC S10221 washer for JJ jacks

SWC S1028 insulated flat washer

SWC S1029 insulated shoulder washer

Please note the diagrams shown here are for representational purposes only and are not displayed to scale.

TABLE 1.

SWC 11 SWC C11X SWC 80 SWC 440X

SWC S1027 nut for JJ jacks

TABLE 2. MFR# 11 SWC C11X 80 440X

DESCRIPTION JJ034 headphone jack/mono JJ034 phone jack/mil spec/key JJ034 inline jack/ or VE055 PJ055B headphone plug/ROHS compliant

1.800.235.3300 | edmo.com

EDMO# SWC 112BX SWC 12B SWC 260

MFR# 112BX 12B 260

DESCRIPTION 1/4-inch enclosed jack stereo headphone jack 1/4 in stereo phone plug

EDMO DISTRIBUTORS

Electrical Interconnect Jack Housings

TABLE 3. MFR#

DESCRIPTION

TJT-120 TJT-102 TJ-120 TJ-101 TJ-102 TJS-102 TP-101 TP-120 TP-102

EDMO#

U92B/U front mount jack threaded telephone jack commercial flag rear mount jack 4 conductor telephone jack U92A/U inline jack U94A/U jack with clip & PTT U174/U plug 4 conductor telephone plug U93A/U plug

EDMO#

MFR#

EDMO#

DESCRIPTION JJ033 microphone jack JJ033 mic jack/mil-spec/key JJ033 inline jack/or VE068J PJ068 microphone plug/ROHS compliant

EDMO#

MFR# 27-655 27-060

DESCRIPTION mini stereo jack mini stereo plug

DESCRIPTION

MP101 MJ-101 U-61/U U-75/U

TABLE 8.

U172/U jack U173/U plug U-61/U 4 conductor jack U-75/U 4 conductor plug

EDMO#

TABLE 7.

SWC 41 SWC 750

S12B C12BX SWC S83 480X

TABLE 6.

27-655 27-060

TABLE 5.

MP-101 MJ-101 U-61/U U-75/U

MFR#

SWC S12B SWC C12BX SWC S830 SWC 480X

1

EDMO# TJT-120 TJT-102 TJ-120 TJ-101 TJ-102 TJS-102 TP-101 TP-120 TP-102

TABLE 4.

MFR#

DESCRIPTION

41

MFR#

SWC S1027 SWC S10221

P10001 S10221

SWC S1028 SWC S1029

S1028 S1029

DESCRIPTION P10001/nut for JJ jacks metal washer for JJ033/JJ034 (washer for use with SWC 12B and SWC S12B) insulated flat washer insulated shoulder washer

mini phone jack/mono miniature phone plug/mono

INTERCOM INSTALL KITS EDMO#

IC-KIT assembled

MFR#

TYPE

IC-KIT

IC-KIT

mono

IC-KIT STE

IC-KIT STE

stereo

IC-KIT STE assembled

KIT INCLUDES 4 ea: SWC 11 and SWC S12B jacks 8 ea: SWC S1028 and SWC S1029 washers 4 ea: SWC 12B and SWC S12B jacks 8 ea: SWC S1028 and SWC S1029 washers

JACK HOUSINGS JACK HOUSINGS Durable aluminum surface- and flush-mounted housings. Available in plain aluminum or with a powder coated finish. Surface-mounted jack housings provide an attractive, tidy cover for mic and phone jacks. Flush mount jack housings keep plugs out of the way with a recessed design that creates a finished, custom look in the cabin (sold with clamp and mounting screw—no jack hardware). –– Aluminum construction –– Mounts with 2 or more holes have 1 inch between hole centers EDMO#

MFR#

HOLES

COLOR

DIMENSIONS

HOLE DIA.

SURFACE MOUNTED FAP08-3ANH AG-JH1 AG-JH2 AG-JH3 AG-JH10 AG-JH5

FAP08-3ANH FAP 08-1 FAP 08-2 FAP 08-3 FAP-08-15 FAP 08-7

NONE 2 2 2 3 4

EDMO DISTRIBUTORS

plain aluminum black wrinkle beige wrinkle plain aluminum plain aluminum black powder coat wrinkle

2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in 3.75 × 5 × 1.13 in 3.75 × 5 × 1.13 in

0.389 in 0.380 in 0.380 in 0.380 in 0.380 in

surface-mounted, black wrinkle

1.800.235.3300 | edmo.com

31

Electrical Interconnect

1

Jack Housings

EDMO# AG-JH6 AG-JH7

MFR#

HOLES

FAP 08-8 FAP 08-9

4 4

beige powder coat wrinkle plain aluminum

COLOR

3.75 × 5 × 1.13 in 3.75 × 5 × 1.13 in

DIMENSIONS

0.380 in 0.380 in

HOLE DIA.

2 2 2 4

black wrinkle beige wrinkle plain aluminum black powder coat wrinkle

2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in 3.8 × 4.9 × 1.06 in

0.380 in 0.380 in 0.380 in 0.380 in

FLUSH MOUNTED AG-JH4 AG-JH8 AG-JH9 FAP08-10

FAP 08-4 FAP 08-5 FAP 08-6 FAP08-10

flush mounted, beige wrinkle

UNDER PANEL JACK MOUNTS These mic and phone jack brackets provide a 90-degree angle mount for under-dash use. This sturdy design has formed sides to hide wires and is constructed with 0.063-inch thick, heat-treated aluminum with a tough black wrinkle powder coat finish. –– Aluminum construction –– Mounts with 2 or more holes; have 1 inch between hole centers EDMO# AG-JM1 AG-JM2 AG-JM3 AG-JM4

MFR#

HOLES

FAP 09-1 FAP 09-2 FAP 09-3 FAP 09-4

1 2 3 4

COLOR

DIMENSIONS

black powder coat wrinkle black powder coat wrinkle black powder coat wrinkle black powder coat wrinkle

1.5 × 1.5 × 1 in 2.3 × 1.5 × 1 in 4.5 × 1.5 × 1 in 2.3 × 2.5 × 1 in

HOLE DIA. 0.380 in 0.380 in 0.380 in 0.380 in

NEXUS TJT-120 JACK HOUSINGS Designed to house Nexus mic and phone jacks with durable, 0.040-inch thick aluminum with either a powder coat finish or no finish. These housings are for surface mounting; mount with four small screws. –– Aluminum construction

EDMO# FAP 08-21 FAP 08-18

JACK & CONNECTOR HOUSING/BLACK EDMO# AVB MFR# AVB This ashtray mountable mic and phone jack housing can adapt to most ashtrays found in Cessna, Beech, Piper, Mooney, and Rockwell aircraft. Made from injection molded, high impact black plastic. –– Dimensions: 3 × 3-1/4 in

32

1.800.235.3300 | edmo.com

MFR# FAP 08-21 FAP 08-18

HOLES 1 2

COLOR beige beige

DIMENSIONS 2.9 × 3.56 × 1.06 in 2.9 × 3.56 × 1.06 in

HOLE DIA. 0.687 in 0.687 in

CIGARETTE LIGHTER RECEPTACLE EDMO# FAP 09-5 MFR# FAP 09-5 Bracket for cigarette lighter receptacle under the panel. Provides a place to plug in GPS, light or tire pump, etc. Powder coated with black wrinkle paint over aluminum. –– Dimensions: 2.5 × 1.5 × 1 inches with a 0.875 diameter hole

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT

Circuit Breakers & Accessories

EDMO# 7271-8-25 7271-8-30 7271-8-35

MFR#

MIL-SPEC

7271-8-25 7271-8-30 7271-8-35

-

AMP RATING 25 30 35

1

CIRCUIT BREAKERS & ACCESSORIES 7270 & 7271 SERIES KLIXON Klixon 7270 and 7271 series circuit breakers use less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. The Klixon disc element is resistant to shock and vibration and can be calibrated within close tolerances throughout the service life of the 7270-1 breaker. –– Trip-free operation –– Snap-acting thermal element –– Small size –– Lightweight –– MIL-C-5809 qualified 7271-8 –– Current rating: 3 to 35 amps –– High interrupting capacity –– Available with neck mounting (7270-1 and 7271-8 devices) or standard cover plate (7270-7 and 7271-3 devices) –– Typical use: aircraft and ground support equipment

vibration: mechanical shock: acceleration: weight: interrupt current: endurance:

EDMO# 7270-1-3 7270-1-5 7270-1-7.5 7270-1-10 7270-1-15 7270-1-20 7270-1-25 7270-1-30 7270-1-35 7270-5-3 7270-5-5 7270-5-7.5 7270-5-10 7270-5-15 7270-5-20 7270-5-25 7270-5-30 7270-5-35 7271-8-3 7271-8-5 7271-8-7.5 7271-8-10 7271-8-15 7271-8-20

10 G minimum, 50-500 Hz 30 G 10 G 39 grams maximum (7270-1 and 7271-8) 4,000 amps at 30 VDC 3,500 amps at 120 VAC, 400 Hz 5,000 cycles: 120 VAC 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 5,000 cycles: 30 VDC, inductive 2,500 cycles: 30 VDC, resistive 5,000 cycles: mechanical, no load

MFR# 7270-1-3 7270-1-5 7270-1-7.5 7270-1-10 7270-1-15 7270-1-20 7270-1-25 7270-1-30 7270-1-35 7270-5-3 7270-5-5 7270-5-7.5 7270-5-10 7270-5-15 7270-5-20 7270-5-25 7270-5-30 7270-5-35 7271-8-3 MS24510-A-5 7271-8-7 1/2 7271-8-10 7271-8-15 7271-8-20

MIL-SPEC MS 24509-A-5 MS 24509-A-7½ MS 24509-A-10 MS 24509-A-15 MS 24510-A-5 MS 24510-A-7½ MS 24510-A-10 MS 24510-A-15 -

EDMO DISTRIBUTORS

AMP RATING 3 5 7.5 10 15 20 25 30 35 3 5 7.5 10 15 20 25 30 35 3 5 7.5 10 15 20

7274 SERIES KLIXON The Klixon 7274 series circuit breakers are small, lightweight, low amperage devices that protect aerospace cable and components in airborne vehicles and equipment. The commercial grade version of this circuit breaker is the Klixon 7277 series, which is physically and electrically identical to the 7274-2 except that the 7277 has wider calibration limits. The 7274 is available in standard ratings from 1/2 to 20 amps and has a trip–free, indicating reset button. A “wiping action” contact design provides low voltage drop, faster trip time, and high 7274-2 reliability in low voltage applications. They are available in standard ratings from 1/2 to 20 amps. –– Uses minimum space –– Lightweight –– Trip-free –– MIL-C-5809 qualified –– Current rating: 1/2 to 20 amp –– Low amp –– High vibration resistance –– Typical use: military airborne vehicle and equipment protection

vibration: mechanical shock: acceleration: weight:

interrupt current:

endurance:

EDMO# 7274-2-.5 7274-2-.75 7274-2-1 7274-2-1.5 7274-2-2 7274-2-2.5 7274-2-3 7274-2-4 7274-2-5 7274-2-7.5 7274-2-10 7274-2-15 7274-2-20

10 G minimum, 50-500 Hz 35 G 10 G 7274-2 (MS 26574): 28 grams maximum 7274-4 (MS 26574 A): 28 grams maximum 7274-11 (MS 22073): 33 grams maximum 7274-69 (MS 22073V): 33 grams 7274-70 (MS 26474L): 33 grams 0.50-5 amps: unlimited at 28 VDC 7.50-15 amps: 2,000 amps at 28 VDC 0.50-1.50 amps: unlimited at 120 VAC, 400 Hz 2-5 amps: 800 amps at 120 VAC, 400 Hz 7.50-20 amps: 500 amps at 120 VAC, 400 Hz 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: mechanical, no load

MFR# 7274-2-1/2 7274-2-.75 7274-2-1 7274-2-1 1/2 7274-2-2 7274-2-2 1/2 7274-2-3 7274-2-4 7274-2-5 7274-2-7 1/2 7274-2-10 7274-2-15 7274-2-20

MIL-SPEC MS 26574-½ MS 26574-¾ MS 26574-1 MS 26574-1½ MS 26574-2 MS 26574-2½ MS 26574-3 MS 26574-4 MS 26574-5 MS 26574-7½ MS 26574-10 -

1.800.235.3300 | edmo.com

AMP RATING 0.5 .75 1 1.5 2 2.5 3 4 5 7.5 10 15 20

33

ELECTRICAL INTERCONNECT

1

Circuit Breakers & Accessories

EDMO# 7274-11-.5 7274-11.75 7274-11-1 7274-111.5 7274-11-2 7274-112.5 7274-11-3 7274-11-4 7274-11-5 7274-11-75 7274-11-10 7274-11-15 7274-11-20 7274-70-1

MFR#

MIL-SPEC

7274-11-1/2 7274-11-.75 7274-11-1 7274-11-1.5 7274-11-2 MS22073-2 1/2 7274-11-3 7274-11-4 7274-11-5 7274-11-71/2 7274-11-10 7274-11-15 7274-11-20 7274-70-1

AMP RATING

MS 22073-½ MS 22073-¾ MS 22073-1 MS 22073-1½ MS 22073-2 MS 22073-2½ MS 22073-3 MS 22073-4 MS 22073-5 MS 22073-7½ MS 22073-10 MS 26547L

0.5 0.75 1 1.5 2 2.5 3 4 5 7.5 10 15 20 1

EDMO#

MFR#

7277-2-10 7277-2-15 7277-2-20 7277-5-3/4 7277-5-1 7277-5-1.5 7277-5-1/2 7277-5-2 7277-5-2.5 7277-5-3 7277-5-4 7277-5-5 7277-5-7.5 7277-5-10 7277-5-15 7277-5-20

AMP RATING

7277-2-10 7277-2-15 7277-2-20 7277-5-.75 7277-5-1 7277-5-1 1/2 7277-5-1/2 7277-5-2 7277-5-2.5 7277-5-3 7277-5-4 7277-5-5 7277-5-7 1/2 7277-5-10 7277-5-15 7277-5-20

10 15 20 0.75 1 1.5 0.5 2 2.5 3 4 5 7.5 10 15 20

ACCESSORIES 7277-2-NUT

7277 SERIES

7277-2

KLIXON The Klixon 7277 series circuit breakers are meant for use in applications that do not require military approvals. The trip-free 7277 was originally developed as an alternative to slow blow fuses and is used extensively as primary electrical circuit protection on general aviation aircraft. The military grade version of this circuit breaker is the physically and electrically identical Klixon 7274-2, which has wider calibration limits. 7277-2 –– Miniature size –– Lightweight –– Trip-free design –– Current rating: 0.5 to 20 amps –– High vibration resistance –– Typical use: computers, construction, data processing and telecommunications equipment, flight simulators, general aviation aircraft, materials handling, trainers, and simulators where all breakers are operated on low ampere control current

vibration: mechanical shock: acceleration: weight: interrupt current:

endurance:

10 G minimum, 50-500 Hz 35 G 10 G 28 grams maximum 0.50-5 amps: unlimited at 28 VDC 7.50-15 amps: 2,000 amps at 28 VDC 0.50-1.50 amps: unlimited at 120 VAC, 400 Hz 2-5 amps: 800 amps at 120 VAC, 400 Hz 7.50-20 amps: 500 amps at 120 VAC, 400 Hz 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: mechanical, no load

2TC SERIES KLIXON The 2TC series encompasses 1-25 amp, single-phase, miniature ambient compensated breakers. Their ratings are coordinated so any rating will trip before another rating twice its capacity in the event of a fault of up to 6,000 amps let–thru current. This results in improved overall equipment performance since only the smallest faulted circuit is interrupted, while larger circuits remain operational. –– Miniature size –– Lightweight –– Trip–free design –– Current ratings (1 to 25 amps) –– High vibration resistance –– High interrupting capacity –– Coordinated ratings –– AS58091 qualified (also: Military Approvals, FAA PMA) –– Typical end use: aircraft power distribution systems

vibration: mechanical shock: acceleration: weight: interrupt current:

endurance:

EDMO# 7277-2-1/2 7277-2-3/4 7277-2-1.5 7277-2-2 7277-2-2.5 7277-2-3 7277-2-4 7277-2-5 7277-2-7.5

34

MFR#

AMP RATING

7277-2-1/2 7277-2-3/4 7277-2-1.5 7277-2-2 7277-2-2 1/2 7277-2-3 7277-2-4 7277-2-5 7277-2-7 1/2

0.5 0.75 1.5 2 2.5 3 4 5 7.5

1.800.235.3300 | edmo.com

EDMO#

2TC2

10 G minimum; 50-500 Hz (other vibration levels available) 50 G 10 G 24 grams maximum (2TC14) 1-20 amps: 6,000 amps at 28 VDC 25 amps: 1,625 amps at 28 VDC 1-15 amps: 2,500 amps at 120 VAC, 400 Hz 20 amps: 2,000 amps at 120 VAC, 400 Hz 25 amps: 1,800 amps at 120 VAC, 400 Hz 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: mechanical, no load

MFR#

MIL-SPEC

AMP RATING

2TC2 MILITARY DESIGNATION 2TC2-1 2TC2-2

2TC2-1 2TC2-2

MS 3320-1 MS 3320-2

1 2

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT

Circuit Breakers & Accessories

MFR# 2TC2 1/2 2TC2-3 2TC2-4 2TC2-5 2TC2-7 1/2 2TC2-10 2TC2-15 2TC2-20 2TC2-25

MIL-SPEC MS 3320-2½ MS 3320-3 MS 3320-4 MS 3320-5 MS 3320-7½ MS 3320-10 MS 3320-15 MS 3320-20 MS 3320-25

AMP RATING 2.5 3 4 5 7.5 10 15 20 25

2TC14-1 2TC14-2 2TC14-3 2TC14-5

-

1 2 3 5

3TC2 SERIES

vibration: mechanical shock: acceleration: weight: interrupt current:

KLIXON The 3TC series encompasses 15-35 amp, single-phase, miniature ambient compensated breakers. Ambient compensated circuit breakers permit system designers to specify smaller gauge wire where the circuit breaker and wiring are exposed to varying temperatures. Their ratings are coordinated so that, in the event of a fault of up to 6,000 amps let–through current, any rating will trip before another circuit breaker twice its rating. This results in improved overall equipment performance since only the smallest faulted circuit is interrupted, while larger circuits remain operational. Provides current ratings from 15 to 35 amps. –– Miniature size –– Lightweight –– Trip–free design –– Current ratings (1 to 35 amps) –– High vibration resistance –– High interrupting capacity –– Coordinated ratings –– AS58091 qualified (also: military approvals, FAA PMA) –– High interrupting capacity –– Typical end use: aircraft power distribution systems

vibration: mechanical shock: acceleration: weight: interrupt current: endurance:

EDMO# 3TC2-25 3TC2-30 3TC2-35

3TC2

10 G minimum; 50-500 Hz (other vibration levels available) 50 G 10 G 36 grams maximum 15-35 amps: 6,000 amps at 28 VDC 15-35: 2,000 amps at 120 VAC, 400 Hz 25 amps: 1,800 amps at 120 VAC, 400 Hz 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: mechanical, no load

MFR#

MIL-SPEC

3TC2-25 3TC2-30 3TC2-35

MS 14105-25 MS 14105-30 MS 14105-35

EDMO DISTRIBUTORS

AMP RATING 25 30 35

KLIXON The Klixon 3TC7 style circuit breakers are single-phase, non-ambient compensated circuit breakers that provide high short circuit interrupting capacity. The series features a trip–free design that prevents the circuit breaker from being closed manually on overloads. –– Miniature size –– Lightweight 3TC7 –– Trip-free design –– Current rating: 5 to 35 amps –– AS58091 qualified (MS25244) –– High vibration resistance –– High interrupt capacity: interrupting a 6,000A circuit at 30VDC, or 3,500A circuit at 120VAC, 400 Hz –– Typical use: aircraft, avionics and electrical systems

2TC14 COMMERCIAL DESIGNATION 2TC14-1 2TC14-2 2TC14-3 2TC14-5

3TC7 SERIES

1

EDMO# 2TC2-2 1/2 2TC2-3 2TC2-4 2TC2-5 2TC2-7.5 2TC2-10 2TC2-15 2TC2-20 2TC2-25

endurance:

EDMO# 3TC7-5 3TC7-7.5 3TC7-10 3TC7-15 3TC7-20 3TC7-25 3TC7-30 3TC7-35

10 G 30 G at peak 10 G 38.9 grams 1-20 amps: 6,000 amps at 28 VDC 25 amps: 1,625 amps at 28 VDC 3-15 amps: 2,500 amps at 120 VAC, 400 Hz 20 amps: 2,000 amps at 120 VAC, 400 Hz 25 amps: 1,800 amps at 120 VAC, 400 Hz 15-35 amps: 2,000 amps at 120 VAC, 400 Hz 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC, 400 Hz inductive 5,000 cycles: 30 VDC, 400 Hz resistive 5,000 cycles: mechanical, no load

MFR# 3TC7-5 3TC7-7 1/2 3TC7-10 3TC7-15 3TC7-20 3TC7-25 3TC7-30 3TC7-35

MIL-SPEC MS 25244-5 MS 25244-7½ MS 25244-10 MS 25244-15 MS 25244-20 MS 25244-25 MS 25244-30 MS 25244-35

AMP RATING 5 7.5 10 15 20 25 30 35

E-T-A SERIES These single-pole, high performance thermal circuit breakers have a tease-free, trip-free, snap action mechanism and push/pull, on/off manual actuation. An indicator band on the push button displays the tripped/off position. Threadneck panel mounted and available in tracked vehicle, aircraft, and general-purpose versions. –– Push/pull-on/off actuator –– Screw terminals –– Threadneck panel mount –– Black finish for aircraft application

voltage rating

ETA

DC 28 V AC 115 V (400 Hz) upon request

1.800.235.3300 | edmo.com

35

ELECTRICAL INTERCONNECT Circuit Breakers & Accessories

1

W31 SERIES current rating range typical life ambient temperature insulation coordination (IEC 60664 and 60664A) dielectric strength (IEC 60664 and 60664A) operating area insulation resistance interrupting capacity Icn interrupting capacity (UL1077) degree of protection (IEC 60529/ DIN 40050)

EDMO# 413K14LN25 413K14LN26 413K14LN27

30…90 A (-LN2/-N2) 3,000 operations at 1 × 1N -55...+75 °C (-67...+167 °F) rated impulse withstand voltage 1.5 kV pollution degree 3 test voltage AC 1,500 V >100 MΩ (DC 500 V) 6,000 A 6,000 A operating area IP40 terminal area IP00

MFR#

W31 weight: interrupt capacity:

< 2 oz 0.5-50 amp models – 1000 amps at 240 VAC 30-50 amp models – 1000 amps at 50 VDC operating voltage, max: 50 VDC or 240 VAC (to 400 Hz) endurance: > 6,000 cycles at 100% of rating or 10,000 mechanical cycles

AMPS

413-K14-LN2-50 413-K14-LN2-60 413-K14-LN2-70

50 60 70

EDMO#

W23 SERIES Thermal circuit breakers with push/pull actuators and a visible trip indicator band. –– Single pole, push/pull –– Visible trip indicator band –– Trip free operation –– Termination type: 8-32 screws 90° to each other (screws and washers installed)

W23

weight: interrupt capacity:

operating voltage, max: endurance:

EDMO# W23-1 W23-2 W23-3 W23-4 W23-5 W23-7.5 W23-10 W23-15 W23-20 W23-25 W23-30 W23-35 W23-40 W23-50

36

Thermal circuit breakers with a toggle actuator. –– Single pole, toggle –– Trip-free operation –– Termination type: 8-32 screws 90° to each other (screws and washers installed)

< 2 oz with 4X max series fuse protection 0.5-50 amp models – 1,000 amps at 240 VAC 30-50 amp models – 1,000 amps at 50 VDC without 4X max series fuse protection 0.5-25 amp models – 2,000 amps at 50 VDC 10-20 amp models – 2,000 amps at 120 VAC 50 VDC or 240 VAC (to 400 Hz) > 6,000 cycles at 100% of rating or 10,000 mechanical cycles

MFR#

AMP RATING

6-1393246-4 6-1393246-7 7-1393246-0 7-1393246-3 713932465 7-1393246-7 6-1393246-5 613932466 6-1393246-8 613932469 7-1393246-1 7-1393246-2 7-1393246-4 713932466

1 2 3 4 5 7.5 10 15 20 25 30 35 40 50

1.800.235.3300 | edmo.com

MFR#

W31M-1 W31M-2 W31M-3 W31M-5 W31M-7.5 W31M-10 W31M-15 W31M-20 W31M-25 W31M-30 W31M-35 W31M-40 W31M-50

AMP RATING

3-1393247-1 3-1393247-4 3-1393247-7 4-1393247-2 4-1393247-4 3-1393247-2 3-1393247-3 3-1393247-5 3-1393247-6 3-1393247-8 3-1393247-9 4-1393247-1 4-1393247-3

1 2 3 5 7.5 10 15 20 25 30 35 40 50

W58 SERIES Thermal P&B circuit breaker with a push to reset actuator. –– 0.5 amp to 30 amp ratings –– Cannot be manually tripped –– Button extends for visual trip indication –– Push button to reset breaker –– Single pole –– Termination screw or 0.250 inches QC –– Bottom marked amperage rating optionally available

weight: interrupt capacity: vibration: operating voltage, max: endurance:

EDMO# W58-1 W58-2

W58

< 1.5 oz 2,000 amps at 50 VDC (0.5-30 am models) 1,000 amps 250 VAC (0.5 – 30 amp models) withstands to 10 grams at 10-55 Hz 50 VDC; 250 VAC over 1,000 cycles at 200% of rated load

MFR# 3-1393249-9 4-1393249-2

AMP RATING 1 2

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT

Circuit Breakers & Accessories

W58-3 W58-4 W58-5 W58-7 W58-10 W58-15 W58-20 W58-25 W58-30

MFR# 4-1393249-5 4-1393249-8 4-1393249-9 5-1393249-0 4-1393249-0 4-1393249-1 4-1393249-3 413932494 413932496

AMP RATING 3 4 5 7 10 15 20 25 30

20TC2 SERIES KLIXON Klixon 20TC series circuit breakers combine a rocker actuated on/off switch and a circuit protector in one, compact package. Snap–on actuators are available on request in a variety of colors, styles, and indication markings designed to provide a stylish console appearance to the panels of light aircraft. The translucent actuator permits quick identification of the actuator position under low ambient lighting conditions by 20TC emitting a soft glow from a light source, such as an edge–lighted panel. –– Versatile rocker actuator: snap–on, switch type –– Various styles and colors (black, white, colored, translucent) –– Panel mounting –– Provides dual function (on/off) circuit switching and protection –– Current ratings (3 to 35 amps)

vibration: mechanical shock: acceleration: weight: interrupt current: endurance:

EDMO# 20TC2-BA5 20TC2-BA10 20TC2-BA20 20TC2-AA35

10 G 50 G 10 G 39 grams 2,000 amps at 30 VDC 1,000 amps at 120 VAC, 400 Hz 5,000 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 28 VDC, 400 Hz inductive 2,500 cycles: 28 VDC, 400 Hz resistive 10,000 cycles: mechanical, no load

MFR# 20TC2-BA-5 20TC2-BA-10 20TC2-BA-20 20TC2-AA-35

AMP RATING 5 10 20 35

6752-100 SERIES KLIXON

1

EDMO#

Klixon 6752-100 series thermal–magnetic circuit breakers include current ratings ranging from 50 to 100 amps. The interrupting capacity, vibration resistance, and long cycling life of the 6752-100 series exceed military standards. The 6752100 series circuit breakers use ambient temperature compensation to maintain their performance capabilities by means of a thermal compensator in the temperature range of -40°C to 70°C. This series is able to interrupt four fault currents of 6,000 amperes—two at sea level and two at 60,000 ft. This can be accomplished on a 120 VAC, 400 Hz system or a 30 VDC system. 6752 –– Current ratings: 50-100 amps –– Proven reliability and performance of the 6752 series circuit breaker –– Trip-free design –– Circuit protection unaffected by temperature fluctuations –– MIL-C-5890 qualified –– Ambient compensated –– High vibration resistance –– High interrupting capacity: 6,000 amps –– Typical use: military

vibration: mechanical shock: acceleration: weight: interrupt current:

10 G minimum, 50-2,000 Hz 30 G 10 G 113.6 grams (0.25 pound) max 2.5-50 amps: 6,000 amps at 120 VAC, 400 Hz 2.5-50 amps: 4,200 amps at 120 VAC, 400 Hz 5,000 cycles: 120 VAC 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 2,500 cycles: 28 VDC, 400 Hz inductive 5,000 cycles: 28 VDC, 400 Hz resistive 5,000 cycles: mechanical, no load

endurance:

EDMO# 6752100-50 6752100-60 6752100-70 6752100-75 6752100-80 6752100-90 6752100100

MFR#

MIL-SPEC

6752-100-50 6752-100-60 6752-100-70 6752-100-75 6752-100-80 6752-100-90 6752-100-100

MS 25361-50 MS 25361-60 MS 25361-70 MS 25361-75 MS 25361-80 MS 25361-90 MS 25361-100

AMP RATING 50 60 70 75 80 90 100

FUSE HOLDERS

FHP-1 EDMO#

MFR#

FNY-1

3453LF2A

DESCRIPTION

FHP-1 0FHP001Z bayonet knob inline,15-in loop of 14G red wire FNY-1 FNY1 twist-lock inline, 8-in loop of 14G black wire, 1 spring 3453LF2A 03453LF2X panel mount, 3/16-inch straight dual purpose solder terminal

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

37

ELECTRICAL INTERCONNECT Power Outlets

1

ALL GLASS FUSES

EDMO#

LITTELFUSE INC AG fuses, or “all glass” fuses vary in length, diameter, and amperage rating and have a voltage rating of 32V AC/DC. Sold in quantities of five. EDMO# AGC-.5 AGC-1 AGC-1.5 AGC-2 AGC-2.5 AGC-3 AGC-4 AGC-5 AGC-6

MFR#

AMP RATING

0AGC05V 0AGC001.V 0AGC01.5V 0AGC002.V 0AGC02.5V 0AGC003.V 0AGC004.V 0AGC005.V 0AGC006.V

0.5 1 1.5 2 2.5 3 4 5 6

EDMO# AGC-7.5 AGC-8 AGC-10 AGC-15 AGC-20 AGC-25 AGC-30 AGC-35

MFR# 0AGC07.5V 0AGC008.V 0AGC010.V 0AGC001.V 0AGC020.V 0AGC025.V 0AGC030.V 0AGC015.V

AMP RATING 7.5 8 10 15 20 25 30 35

SLO-BLO GLASS FUSES The 3AG Slo-Blo® fuses provide cost-effective, reliable individual protection for components and internal circuits. The Slo-Blo fuses eliminate guesswork and time-consuming circuit testing; when an overcurrent occurs, the fuse catalog number with the suffix “ID” is easy to identify upon the fuse opening with a discoloration of its glass body. –– 313 series are time-delay fuses that open after a few seconds of over current conditions –– Users can easily identify fuses after they’ve opened by the discoloration of their glass bodies –– Provide superior protection for inductive loads such as motors, transformers, and solenoids –– Sold in quantities of five –– Voltage rating: 250

V313-.5 V313-1 V313-2 V313-3

MFR#

AMP RATING

V313-.5 V313-1 V313-2 V313-3

0.5 1 2 3

EDMO# V313-4 V313-5 V313-10

COLOR

PE7000-3

PE7000-3

red

PE7000-4

PE7000-4

blue

PE7000-5

PE7000-5

yellow

PE7000-6

PE7000-6

black

PE7000-7

PE7000-7

gray

PE7000-8

PE7000-8

green

CIRCUIT BREAKER SAFETY LOCKS

LITTELFUSE INC

EDMO#

MFR#

MFR# 0313004.VXP V313-5 0313010.VXP

AMP RATING

Lockout rings prevent the inadvertent closing of circuit breakers connected to equipment that is under repair or removed from the aircraft. Easy to install and remove from Klixon and similar type circuit breakers. Safety locks come both with and without tags. BOEING proprietary part FAA-PMA approved and FAA standard “Maintenance Support Hardware” approved. –– Fits Klixon circuit breakers –– 2 × 3/4 in EDMO# S493959501 S493959521 S493959531

MFR# S4933959-501 S4933959-521 S493959-531

INCLUDES safety lock only lock with “remove before flight” flag lock with “inoperative do not operate” flag

4 5 10

POWER OUTLETS CIRCUIT BREAKER BUTTON CAPS KLIXON These color-coded circuit breaker caps can be easily installed and removed from Klixon and similar circuit breakers. The colored caps designate circuit breakers for flight check and other purposes. In addition, the caps greatly improve grip and don’t shake loose and rattle like other caps. Available in 8 colors. FAA-standard “Maintenance Support Hardware” approved. EDMO#

38

MFR#

COLOR

PE7000-1

PE7000-1

white

PE7000-2

PE7000-2

orange

1.800.235.3300 | edmo.com

TA102 DUAL USB CHARGING PORT TRUE BLUE POWER The TA102 Dual USB Charging Port is an easy way to power up any standard or high-power device that uses a USB interface - this includes cell phones, GPS devices, and tablets. This self-contained device protects itself and the charging device from power surges, short circuits, and over-current potential. –– Charges one or two products simultaneously with a USB interface while providing short-circuit, over-current, and over-temperature protection –– 2.1 amps power output per port (5 VDC± 0.25 per port) –– Can be mounted in the panel or cabin and uses 10-32 VDC input voltage

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT Power Outlets

single port: 0.8 oz, dual port:1.3 oz 1.5 × 0.52 × 1.25 in 1.5 × 1.03 × 1.25 in 10-32 VDC 18 W max per port 5 VDC ± 0.25 per port 3.0 amps per port USB Type-A and/or Type-C; single and dual in-seat, cabin, cockpit; front or rear mount FAA TSO C71 certified, RTCA DO-160G qualified

input voltage: input power: output voltage: output current: charging port type: mounting: certification:

9017946

9017945

EDMO#

MFR#

1

weight: dimensions:

DESCRIPTION

DUAL PORT weight: dimensions: input voltage: input current: output voltage: output power: charging port type: mounting: certification

EDMO# 6430102-1 6430102-2 6430102-3 6430102-4

0.2 lb 1.5 × 1.5 × 0.96 in 10-32 VDC 24 W max; 1.7 amps at 14 VDC 0.85 amps at 28 VDC 5 VDC ± 0.25 per port 2.1 amps per port USB Standard-A panel or cabin, front or rear mount instrument mount kit (see parts table below) FAA TSO C71 certified, EASA ETSO C71 certified RTCA DO-160G qualified

MFR# 6430102-1 6430102-2 6430102-3 6430102-4 9017945 9017946 9017947 9017960

643202-1 643202-2 643202-3 643202-4 643202-5 643202-6

Type A, C, rear connector Type A, C, bottom connector Type C, C, rear connector Type C, C, bottom connector Type A, A, rear connector TypeA, A, bottom connector

SINGLE PORT 643202-7 643202-8 643202-9 643202-10

643202-7 643202-8 643202-9 643202-10

Type C, rear connector Type C, bottom connector Type A, rear connector Type A, bottom connector

ACCESSORIES 9017897 9017947 9017960

9017897 9017947 9017960

front mount adapter for single port TA202 TA102/TA202 dual 2-1/4 in instrument mounting kit TA102/TA202 mating connector kit

DESCRIPTION sealed USB connector, rear power input sealed USB connector, bottom power input lighted USB connector, rear power input lighted USB connector, bottom power

ACCESSORIES 9017945 9017946 9017947 9017960

643202-1 643202-2 643202-3 643202-4 643202-5 643202-6

TA102 circular rear mount installation kit TA102 front mount install kit TA102/TA202 2-1/4 in instrument hole mounting kit TA102/TA202 mating connector kit

TA202 SERIES HIGH POWER USB CHARGING PORT

POWER OUTLET 115V AC

EDMO# Q227-115 MFR# Q227-115 Panel-mounted 125 VAC 15A power outlet designed for panels 0.8- 2.0 mm in thickness.

weight: rating: material: panel thickness:

0.03 lb 15A 125V AC UL94-V0 0.8 mm – 2.0 mm

TRUE BLUE POWER The TA202 High Power USB Charging Port is a compact power source for in-seat, cabin, and cockpit use that provides USB Type-C and Type-A ports. This unit supplies 3 amps per port and is available in single and dual configurations. –– Charges 1-2 products simultaneously at full power and outputs 3 amps per port (5 VDC ± 0.25 output voltage) –– Doesn’t require any external power converters for 10-32 VDC installations –– Provides short circuit, over-current, and over-temperature protection

CIGARETTE LIGHTER SOCKET 12 & 24 VDC Cigarette lighter sockets constructed with glass-filled, high-temperature, nylon plastic parts with a temperature index of 257° F. The sockets’ metal current-carrying parts are 0.032-inch copper alloy for maximum conductivity and nickel plated for corrosion resistance. –– 0.25-inch quick connect tabs –– Front or rear mount –– Provided with plastic alloy cap to seal receptacle when not in use EDMO# CL2400 CL6860

EDMO DISTRIBUTORS

MFR# CL2400 CL6860

VOLTAGE 24 V 12 V

1.800.235.3300 | edmo.com

RATING 24 V, 10 A 12 V, 10 A

39

ELECTRICAL INTERCONNECT

1

Switches

SWITCHES STACO AV17 PUSH-BUTTON SWITCHES STACO SYSTEMS Staco Systems’ AV17 series is a broad line of lighted pushbutton switches and indicators built to US Military specifications and designed to work in extreme environmental applications. The AV17 is equipped with a sunlight readable display and is compatible with night vision goggles. –– One and two-pole snap action –– Individual or matrix mount –– Crimp-pin, solder or PC termination –– Indicator, momentary, or alternate action –– lightweight and short in length –– LED or incandescent illumination and NVIS compatibility –– Water-resistant –– Common or split ground circuit configurations –– Qualified to MIL-PRF-22885/101 for incandescent

weight: dimensions:

actuation travel: actuation force: mounting torque:

0.59 -1.09 oz (varies depending on switch configuration) length behind panel: solder 1.3 in short crimp 1.86 in mounting panel hole: 0.691 ± 0.004 in 0.130 ± 0.030 in 5 lb max 10 ± 2 oz in

STACO AV17 SWITCH & INDICATOR COMPONENTS STACO SYSTEMS Lighted pushbutton switches/indicators are made up of two units including (1) the switch or indicator assembly (table 1 below) and (2) the pushbutton assembly (table 2 below). To order your specific part, choose a switch or indicator identified below and your specific pushbutton (call EDMO for assistance with pushbutton selection if needed). All Staco switches are double-pole, double-throw (DPDT) switches and require the addition of a lighted pushbutton. Indicator assemblies provide a support base for the lighted pushbutton. All switch bodies come with a mounting sleeve. EDMO#

MFR#

DESCRIPTION

CONTACT

MATERIAL

TABLE 1. SWITCH BODY COMPONENTS MOMENTARY 17123 17143 17823 17843 17943

17123 17143 17823 17843 17843

DPDT DPDT DPDT DPDT DPDT

solder solder crimp crimp crimp

silver gold silver gold gold

17124 17144 17824 17844 17944

DPDT DPDT DPDT DPDT DP

solder solder crimp crimp crimp

silver gold silver gold gold

indicator assembly/solder indicator/crimp/use with crimp pin # 39029/22-192

solder crimp

-

ALTERNATE 17124 17144 17824 17844 17944

INDICATORS 17156 17956

40

17156 17956

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT Switches

MFR#

USE TABLE 2. PUSH BUTTON CAP ASSEMBLY COMPONENTS

17001 17002 17003 17007 17008

17001 17002 17003 17007 17008

Dress bezel for switch terminations Faceplate seal; holds faceplates and sits inside bezel Non-reflective faceplate Textured faceplate Filter diffuser (2 ea)

15193

15193

Extraction tool for removing pushbuttons from switch/indicator assemblies. Removing pushbuttons provides easier access to the heads of the locking screws located inside the front portion of the switch/indicator.

1

EDMO#

TABLE 3. TOOLS

ASSEMBLY INFORMATION The following diagrams explain the Staco AV17 switch components shown on the previous pages. To order a custom switch use EDMO’s switch order form on the following page.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

41

ELECTRICAL INTERCONNECT

1

Switches

EDMO DISTRIBUTORS SWITCH ORDER FORM FAX TO 800.828.0623

Please make a copy of this page and fax it to EDMO at the number listed above. DATE: COMPANY: YOUR NAME: PHONE: FAX: 1) Switch or indicator assembly part number: 2) If ordering “crimp” style, quantity of sockets (min. 25): 3) Lamp part number and quantity: 4) Push-button assembly display style: (choose from one of the 8 styles below)

1

2

3

4

5

5) Legend color(s): Draw the display style you have selected and include the color number in each segment

6

7

0 = clear white 1 = red 2 = green 3 = amber yellow

8 4 = lunar white 5 = lemon yellow 6 = blue

6) Custom legend: Draw the display style you have selected and include the text specifications in each segment

TEXT NOTE Full screen, maximum of (4) lines with (7) characters per line. Full screen, horizontal, maximum of (2) lines with (7) characters per line. Full screen, vertical, maximum of (2) columns with (7) characters per column. Half screen, maximum of (2) lines with (4) characters per line.

42

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT Switches

EATON 582 SERIES TWO POLE LIGHTED PUSHBUTTON SWITCHES

1

EATON The 582 Series can be used in commercial and military aircraft and was designed with customer input, focusing on reliability, low weight, short behind-panel-depth, sunlight readability, night vision imaging compatibility, LED illumination, spray-tight sealing, and plug-in mounting. Qualified to MIL-S-22885/101. –– Mounting can and bulbs required for installation –– 582 Cap assembly sold separately, call for part number and pricing –– EDMO order form can be used for Eaton switch orders

EDMO#

MFR#

LIGHTING OPTION

SEAL & RFI OPTION

SWITCH ACTION/TERMINATION

LAMP CIRCUIT

58210A0B0C

582-10A0B0C3

T-1 lamp, basic capsule

unsealed

indicator/plug-in

horizontal split, dual ground

58210A2B0C 58210A4B0C

58210A2B0C3 5/82-10A4B0C3

T-1 lamp, basic capsule T-1 lamp, basic capsule

unsealed unsealed

2 PDT momentary switch/plug-in 2 PDT alternate switch/plug-in

horizontal split, dual ground horizontal split, dual ground

58T-101 58T-107

58T-101 58T-107

Lamp capsule removal tool for Eaton switches Connector block removal tool for Eaton switches

15089

15089

Staco lens guard assembly

ACCESSORIES

58T-101

58T-107

582-SERIES MOUNTING CANS EATON After the 582-series switch has been inserted into the panel, these plug-in mounting sleeves slide over the behind-panel portion of the switch and are secured by tightening the pawl. Included connector block is compatible with M39029/22192 connector pins. No panel spacer.

EDMO# 582RE5-222 582RE5-223 582RE5-224

MFR#

SUB-MINI BULBS

SWITCH MOUNTS

These sub-mini bulbs can be used with both Staco and Eaton switch assemblies.

These switch mounts were designed to simplify the mounting of multiple Staco and Eaton switches and annunciators. Made from high-grade aluminum, glass bead blasted and black anodized for a clean finish. 0.693 inch hole

EDMO#

MFR#

ML-6180 22-I CF16-I OL6839

OL3071 OL3229 OL3335 OL6839

VOLTAGE 5V 14 V 28 V 28 V

EDMO DISTRIBUTORS

AMPERAGE 60 mA 40 mA 16 mA 24 mA

EDMO# SM-2 SM-3 SM-4

MFR# SM-2 SM-3 SM-4

FITS 2 3 4

SWITCH LENGTH

582-RE5-222 582-RE5-223 582-RE5-224

basic basic basic

THICKNESS 0.063 0.090 0.125

SM-2

DIMENSIONS 2.25 × 1.25 in 3 × 1.25 in 3.75 × 1.25 in

SM-4

1.800.235.3300 | edmo.com

43

ELECTRICAL INTERCONNECT Switches

1

ENVIRONMENTALLY SEALED TOGGLE SWITCHES Environmentally sealed toggle switches that are completely protected from dust, moisture, and other contaminants. –– –– –– –– ––

1-, 2-, and 4-pole circuitry 2- and 3-position with maintained and momentary action Molded-in terminal inserts and terminal numbers Environmentally sealed per MIL-S-3950 MS approved and QPL’d per MIL-S-3950

POLES

TYPE OF OPERATION

–– –– –– ––

Thermoset molding materials meet flame retardant requirements Bushing: 15/32 in - 32 thread / 0.690-inch toggle Temperature range: -85°F to 160°F (-65°C to + 71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life

CURRENT RATINGS 28 VDC

1 2 4

EDMO#

maintained momentary maintained momentary maintained momentary

MFR#

115 VAC 60 OR 400 HZ

lamp load 5 4 7 5 5 4

resistive load 20 15 20 18 20 18

MIL P/N

inductive load 15 10 15 10 12 10

lamp load 3 2 4 2 4 2

resistive load 15 15 15 11 15 11

inductive load 10 7 15 8 15 8

CIRCUIT WITH LEVER IN up position

center position

down position

1 POLE 8500K1 8500K2 8500K3 8500K4 8500K6 8500K7 8500K10 8500K11

8500K1 8500K2 8500K3 8500K4 8500K6 8500K7 8500K10 8500K11

MS24523-21 MS24523-27 MS24523-31 MS24523-23 MS24523-24 MS24523-28 MS24523-10 MS24523-30

on on on on on none on off

off off off none off off none none

on on on on none on off on

8501K1 8501K2 8501K3 8501K4 8501K6 8501K9 8501K10 8501K13

MS24524-21 MS24524-27 MS24524-31 MS24524-23 MS24524-24 MS24524-22 MS24524-29 MS24524-33

on on on on on on on on

off off off none off none none on

on on on on none off off none

8502K15 8502K4 8502K9

MS27406-1 MS24525-23 MS24525-22

on on on

on none none

on on off

2 POLE 8501K1 8501K2 8501K3 8501K4 8501K6 8501K9 8501K10 8501K13

4 POLE 8502K15 8502K4 8502K9

44

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT Switches

ENVIRONMENTALLY SEALED LEVER LOCK SWITCHES –– –– –– –– ––

1-, 2-, and 4-pole circuitry 2- and 3-position with maintained and momentary action Locking actuator for safety Molded-in terminal inserts and terminal numbers Environmentally sealed per MIL-S-3950

POLES

–– –– –– –– ––

MS approved and QPL’d per MIL-S-3950 Thermoset molding materials meet flame retardant requirements Bushing: 15/32 inches with 32 thread / 0.470-inch toggle Temperature range: -85°F to 160°F (-65°C to + 71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life

TYPE OF OPERATION

CURRENT RATINGS 28 VDC

1 2 4

EDMO#

lamp load 5 4 7 5 5 4

maintained momentary maintained momentary maintained momentary

MFR#

MIL P/N

1

Environmentally sealed lever lock switches. Each switch is completely protected from dust, moisture, and other contaminants.

115 VAC 60 OR 400 HZ resistive load 20 15 20 18 20 18

inductive load 15 10 15 10 12 10

LEVER LOCK BUSHING STYLE

lamp load 3 2 4 2 4 2

resistive load 15 15 15 11 15 11

inductive load 10 7 15 8 15 8

CIRCUIT WITH LEVER IN up position

center position

down position

1 POLE 8503K1 8503K6 8503K9 8503K10 8503K19 8503K34

8503K1 8503K6 8503K9 8503K10 8503K19 8503K34

MS24658-21A MS24658-23D MS24658-22G MS24658-22D MS24658-30F MS24658-21P

A D G D F P

on on on on on on

off off off off off off

on on on on on on

8504K1 8504K6 8504K9 8504K10

MS24659-21A MS24659-23D MS24659-22G MS24659-22D

A D G D

on on on on

off off off off

on on on on

MS24660-21A

A

on

off

on

2 POLE 8504K1 8504K6 8504K9 8504K10

4 POLE 8505K1

Other switches/bushing styles available.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

45

ELECTRICAL INTERCONNECT Switches

1

SWITCH GUARDS Switch guards prevent accidental operation of switches by limiting switch operation to select functions. The guards can be adapted to one-, two-, and four-pole configurations. One-hole or flush-mounted variations. –– For use with 2- or 3-position switches –– Lever covers molded in various colors –– Metal and molded covers –– Flush and one hole mounted (OHM) mounting styles –– MS approved and QPL‘d per MIL-G-7703 –– Covers are molded out of thermoset molding materials –– Guard covers are spring loaded to either close or lock in open position –– One-hole and three-hole mounting available –– Keyway orientation variations offered on some guards

8492K1

8494K2

8495K1

8497K1

8499K1

EXPLANATION OF CODES 2,10, 11, and 12 for full throw single throw switches returns lever to OFF position

3, 13, and 14 for three-position switches returns lever from up position to center position will not change toggle position when it is in down position

4 and 5 for two-position full throw switches permits locking toggle in extreme up position

6 and 15 insertion of pin through guard prevents accidental operation prevents transfer of single throw switches permits operation from first position to center on three-position switches

7 and 8 for three-position switches returns lever to center position from either extreme guard housing remains fixed in open and closed position Call for parts not shown.

EDMO# 25226-2-3 8498K2 8499K1 8495K1 8494K2 8497K1 8497K3 8497K7 8492K1

MFR# 8497K2 8498K2 8499K1 8495K1 8494K2 MS25224-1 8497K3 8497K7 849K1

MIL P/N MS25224-2 MS25225-2 MS25452-1 MS25221-1 MS25214-2 MS25224-1 MS25224-3 MS25221-1 MS24417-1

CODE 2 3 4 6 7 10 11 12 15

SWITCH MOUNTING/ POSITIONS flush/2 flush/3 flush/2 flush or OHM/2 or 3 OHM/3 OHM/2 --/2 --/2 --/2 or 3

LEVER MATERIAL/ COLOR phenolic/red phenolic/red metal/green metal phenolic/red phenolic/red phenolic/red phenolic/red metal/black

MARKING hinged end -------on --

KEYWAY TAB LOCATION other end -------on --

----opp. hinged end opp. hinged end hinged end opp. hinged end opp. pin hole

1. will not return lever when mounting plate is over 0.0625 [1.58] thick 2. custom lettering or symbols available 3. guard has no moving lever 4. optional colors—black phenolic available for 8497, where other colors are required they are sprayed over standard color

46

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT Switches

TOGGLE SWITCHES

1

7000 SERIES Miniature locking toggle switches for telecommunications, instrumentation, or medical equipment. The 7000 series offers a variety of actuator and termination options. The epoxy terminal-seal is compatible with bottom wash cleaning. –– Silver plated with an epoxy terminal seal –– Solder lug termination EDMO#

MFR#

SWITCH FUNCTION

TOGGLE STYLE/ LENGTH

BAT TOGGLE - SINGLE POLE / DOUBLE THROW 7101K2ZQE 7101SH3ZQE 7103K2ZQE 7103SH3ZQE

7101K2ZQE 7101SH3ZQE 7103K2ZQE 7103SH3ZQE

on on on on

none none off off

on on on on

locking / 0.704 in std. round / 0.42 in locking / 0.704 in std. round / 0.42 in

none none off off

on on on on

locking / 0.704 in std. round / 0.42 in locking / 0.704 in std. round / 0.42 in

none none

on on

locking / 0.704 in std. round / 0.42 in

none none

on on

locking / 0.704 in std. round / 0.42 in

BAT TOGGLE - DOUBLE POLE / DOUBLE THROW 7201K2ZQE 7201SH3ZQE 7203K2ZQE 7203SH3ZQE

7201K2ZQE 7201SH3ZQE 7203K2ZQE 7203SH3ZQE

on on on on

BAT TOGGLE - THREE POLE / DOUBLE THROW 7301K2ZQE 7301SH3ZQE

7301K2ZQE 7301SH3ZQE

on on

BAT TOGGLE - FOUR POLE / DOUBLE THROW 7401K2ZQE 7401SH3ZQE

7401K2ZQE 7401SH3ZQE

on on

MTA & MTL SERIES The MTA and MTL series miniature toggle switches are designed for panel mount applications. –– MTA series have 0.410 inch long round toggles, 1/4-40 bushing –– MTL series have 0.270 inch long round toggle, 1/4-40 bushing –– Materials: contacts—copper alloy silver clad gold flash; actuator—brass nickel-plated; terminal seal—overmolded; case—alkyd polyester; frame—stainless steel; support bracket—steel nickel plated –– Wire lug termination EDMO#

MFR#

SWITCH FUNCTION

TOGGLE LENGTH

MTA BAT TOGGLE - SINGLE POLE MTA-106D MTA-106E 1571920-9

1-1437558-0 1-1437558-2 MTA-106G

on on on

EDMO DISTRIBUTORS

none off off

on on on

0.410 in 0.410 in 0.410 in

1.800.235.3300 | edmo.com

47

ELECTRICAL INTERCONNECT

1

Switches

EDMO#

MFR#

SWITCH FUNCTION

TOGGLE LENGTH

MTA BAT TOGGLE - DOUBLE POLE MTA-206N MTA-206P

2-1437558-0 2-1437558-2

on on

none off

on on

0.410 in 0.410 in

on on

none off

on on

0.410 in 0.410 in

on on

none off

on on

0.410 in 0.410 in

none

on

0.270 in

none off

on on

0.270 in 0.270 in

none

on

0.270 in

none

on

0.270 in

MTA BAT TOGGLE - THREE POLE 314375585 315719202

MTA-306D 3-1571920-2

MTA BAT TOGGLE - FOUR POLE 315719208 MTA-406P

3-1571920-8 4-1437558-

MTL LOCK TOGGLE - SINGLE POLE 1571927-2

MTL-106D

on

MTL LOCK TOGGLE - DOUBLE POLE MTL-206N MTL-206P

MTL206N MTL206P

on on

MTL LOCK TOGGLE - THREE POLE MTL-306D

4-1437559-2

on

MTL LOCK TOGGLE - FOUR POLE 11571927-2

48

MTL-406N

on

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT

Terminal Blocks & Bus Bars

PUSHBUTTON SWITCHES

1

Momentary pushbutton switches. EDMO#

MFR#

SWITCH FUNCTION

POSITION

ACTUATOR/BUSHING HEIGHT

COLOR

8631ZBD2

8631ZBD2

pos.1 off

pos. 2 mom.

SPST/normally open

0.175 in / 0.125 in

black

TP11SHZQE

TP11SHZQE

off

mom.

SPST/normally off

0.155 in / 0.220 in

black

TPC13C0

TPC13C0

off

mom. (3 to 1)

SPST/normally open

0.137 in / 0.216 in

black

TPC13F0

2-1437572-6

2 to 1

mom. (2 to 3)

SPDT/-

0.137 in / 0.216 in

black

MSPF101BC0

814375679

off

mom.

2 circuit/normally open, normally closed

0.256 in / -

black

MSPS103C

0-1437568-6

off

mom.

SPST/normally open

0.2 in / 0.245 in

red

MSPS103C0

MSPS103C0

off

mom.

SPST/normally open

0.2 in / 0.245 in

black

TERMINAL BLOCKS & BUS BARS TERMINAL BLOCKS These terminal blocks are molded in high quality, dimensionally stable DAP thermoset material, providing excellent dielectric strength, even at high temperatures and in moist environments. They can be cut to length to accommodate any job. –– Constructed with diallyl isophalate plastic (per Federal standard GDI-20F and MIL-M-14) –– Operating temperature 425–500°F max. –– Compatible with MS18029 terminal black covers and MS252226 bus bars

27212-1

–– Stud thread size/ max available: 6-32 UNC-2A/20 –– 0.953 × 0.688 in (0.594 in stud spacing)

EDMO DISTRIBUTORS

EDMO# 27212-1-2 27212-1-3 27212-1-4 27212-1-5 27212-1-6 27212-1-7

MFR#

# OF STUDS

MS27212-1-2 MS27212-1-3 MS27212-1-4 MS27212-1-5 MS27212-1-6 MS27212-1-7

2 3 4 5 6 7

EDMO# 27212-1-8 27212-1-9 27212-1-10 27212-1-12 27212-1-15 27212-1-20

MFR# MS27212-1-8 MS27212-1-9 MS27212-1-10 MS27212-1-12 MS27212-1-15 MS27212-1-20

1.800.235.3300 | edmo.com

# OF STUDS 8 9 10 12 15 20

49

ELECTRICAL INTERCONNECT

1

Terminal Blocks & Bus Bars

27212-2

27212-3

–– Stud thread size/max available: 10-32 UNF-2A/16 –– 1.079 × 0.938 in (0.750 in stud spacing)

–– Stud thread size/max available: 1/4-28 UNF-2A/8 –– 1.321 × 1.250 in (1.5 in stud spacing) 27212-2-series

EDMO# 27212-2-6 27212-2-10 27212-2-12 27212-2-16

MFR# MS27212-2-6 MS27212-2-10 MS27212-2-12 MS27212-2-16

# OF STUDS

EDMO#

6 10 12 16

27212-3-3 27212-3-4 27212-3-6 27212-3-8

MFR# MS27212-3-3 MS27212-3-4 MS27212-3-6 MS27212-3-8

# OF STUDS 3 4 6 8

27212-3-series

27212-5

27212-6

–– Stud thread size/max available: 3/8-24 UNF-2A/8 –– 1.17 × 1.25 in (1.5 in stud spacing)

–– Stud thread size/max available: 8-32 UNC-2A/16 –– 1.005 × 0.750 in (0.750 in stud spacing)

EDMO# 27212-5-4 27212-5-6 27212-5-8

MFR#

# OF STUDS

MS27212-5-4 MS27212-5-6 MS27212-5-8

27212-5-8-series

4 6 8

EDMO# 27212-6-3 27212-6-4 27212-6-5 27212-6-10 27212-6-12 27212-6-16

MFR# MS27212-6-3 MS27212-6-4 MS27212-6-5 MS27212-6-10 MS27212-6-12 MS27212-6-16

# OF STUDS 3 4 5 10 12 16

27212-6-series

TERMINAL BLOCK COVER ASSEMBLIES Cover assemblies for MS27212 terminal blocks. Constructed with plastic laminate material per MIL-P-25518 type I. –– Operating temperature: 475°F max

18029-1S –– Stud thread size: 6-32 –– Cover type/nut: S/MS18029-21

EDMO# 18029-1S-3 18029-1S-4 18029-1S-5 18029-1S-6 18029-1S-8

MFR# MS18029-1S-3 MS18029-1S-4 MS18029-1S-5 MS18029-1S-6 MS18029-1S-8

# OF STUDS 3 4 5 6 8

EDMO# 18029-1S-9 18029-1S-10 18029-1S-12 18029-1S-15 18029-1S-20

MFR# MS18029-1S-9 MS18029-1S-10 MS18029-1S-12 MS18029-1S-15 MS18029-1S-20

18029-2S

18029-3S

–– Stud thread size: 10-32 –– Cover type/nut: S/MS18029-22

–– Stud thread size: 1/4-28 –– Cover type/nut: S/MS18029-23

EDMO# 18029-2S10 18029-2S16

MFR#

# OF STUDS

MS18029-2S-10 MS18029-2S-16

18029-2S-series

10 16

EDMO# 18029-3S6 18029-3S8

MFR# MS18029-3S-6 MS18029-3S-8

# OF STUDS 9 10 12 15 20

# OF STUDS 6 8

18029-3S-series

18029-6S –– Stud thread size: 8-32 –– Cover type/nut: S/MS18029-26 EDMO# 18029-6S-3 18029-6S-5 18029-6S12 18029-6S16

50

MFR# MS18029-6S-3 MS18029-6S-5 MS18029-6S-12 MS18029-6S-16

# OF STUDS 3 5 12 16

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELECTRICAL INTERCONNECT

Terminal Blocks & Bus Bars

BUS BARS FOR MS27212 TERMINAL BLOCKS

1

Bus bars for MS27212 series terminal blocks. These bus bars consist of parallel plates of conductors bonded together and separated by a thin layer of insulation; they provide low inductance, high capacitance, and ease of assembly. Ideal for system integration where high power switching, such as IGBTs are involved. –– Copper construction with cadmium plating except where otherwise specified below –– Can be cut to length for specific applications

COMPATIBLE WITH MS27212-1

COMPATIBLE WITH MS27212-2

–– Max capacity: 40 amps

–– Max capacity: 70 amps

EDMO# 25226-2-3 25226-2-5 25226-2-6 25226-2T20 25226-2-10 25226-2-12 25226-2-16 25226-2-20

MFR#

# OF STUDS

MS25226-2-3 MS25226-2-5 MS25226-2-6 MS25226-2T-20 MS25226-2-10 MS25226-2-12 MS25226-2-16 MS25226-2-20

6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32

STUD SIZE 3 5 6 20 10 12 16 20

PLATING MATERIAL cadmium cadmium cadmium tin cadmium cadmium cadmium cadmium

EDMO# 25226-4-3 25226-4-4 25226-4T18 25226-4-12 25226-4-16

MFR# MS25226-4-3 MS25226-4-4 MS25226-4T-18 MS25226-4-12 MS25226-4-16

# OF STUDS 10-32 10-32 5/16-24 10-32 10-32

STUD SIZE 3 4 18 12 2

COMPATIBLE WITH MS27212-3

COMPATIBLE WITH MS27212-4, MS27212-5

–– Max capacity: 90 amps

–– Max capacity: 90 amps

EDMO# 25226-6-4 25226-6-8 25226-6-20

MFR#

# OF STUDS

MS25226-6-4 MS25226-6-8 MS25226-6-20

1/4-28 1/4-28 1/4-28

STUD SIZE 4 8 20

PLATING MATERIAL cadmium cadmium cadmium

EDMO# 25226-8-4 25226-8-6

MFR# MS25226-8-4 MS25226-8-6

# OF STUDS 3/8-24 3/8-24

STUD SIZE 4 6

PLATING MATERIAL cadmium cadmium tin cadmium cadmium

PLATING MATERIAL cadmium cadmium

COMPATIBLE WITH MS27212-6 –– Max capacity: 50 amps EDMO# 25226-10-3 25226-10-5 25226-1012 25226-1016

MFR#

# OF STUDS

MS25226-10-3 MS25226-10-5 MS25226-10-12 MS25226-10-16

8-32 8-32 8-32 8-32

STUD SIZE 3 5 12 16

PLATING MATERIAL cadmium cadmium cadmium cadmium

SNAP RINGS & NUT FOR 27212-X-X SERIES Snap ring and nut for use with the MS18029 cover assemblies (use in conjunction with the 27212-x-x series terminal blocks).

EDMO# MS18029-21 MS18029-22 MS18029-23 MS18029-24 MS18029-25 MS18029-26

MFR# MS18029-21 MS18029-22 MS18029-23 MS18029-24 MS18029-25 MS18029-26

COMPATIBLE WITH MS27212-X TERMINAL BLOCK / MS18029-X COVER -1, 1 TO 20 / MS18029-11(*)-N / N=1 to 20 -2, 1 TO 16 / MS18029-12(*)-N / N=1 to 20 -3, 1 TO 8 / MS18029-13(*)-N / N=1 to 20 -4, 1 TO 8 / MS18029-14(*)-N / N=1 to 20 -5, 1 TO 8 / MS18029-15(*)-N / N=1 to 20 -6, 1 TO 16 / MS18029-16(*)-N / N=1 to 20

EDMO DISTRIBUTORS

STANDARD TERMINAL BLOCK

EDMO# 1546671-6 MFR# 1546671-6 Dual barrier strip with two walls molded onto each side of the terminal screw. This strip is easy to install with backedout, wire-ready screws that have an interrupted thread designed to prevent screws from falling out. Standoffs allow flux and solvents to drain during cleaning.

centerline/length: number of positions/screw size: current rating/wire range: block/screw material:

0.4375 in/3.380 in (85.85 mm) 6 positions/ 6-32 × 1/4 25 A/ 22-14 AWG thermoplastic/steel

1.800.235.3300 | edmo.com

51

ELECTRICAL INTERCONNECT Terminal Blocks & Bus Bars

1

GROUNDING BLOCK ASSEMBLY For installing and grounding wire to an aircraft frame, this 14-pin grounding block mates with standard 6, 14- or 34-position connector housings and has size 16 screw-machined pin contacts that are staked, riveted, and soldered into the L-shaped metal bracket. Tin-plated brass construcwith stainless steel clinch nuts and phosphor bronze gold over nickel-plated pin contacts. EDMO# 203540-1 201298-1 204814-1 200838-2

MFR# 203540-1 2012981 204814-1 2008382

DESCRIPTION 14-pin grounding block 14 pin receptacle 34 pin grounding block 34 pin receptacle

TYPE male female male female

tion 14-pin gndg block

14-pin receptacle

34-pin receptacle

MATERIAL

34-pin gndg block

CONNECTOR TYPE/STYLE

phosphor bronze, gold over nickel plated pin contacts Phenolic - GF housing phosphor bronze, gold over nickel plated pin contacts Phenolic - GF housing

grounding block standard/receptacle grounding block standard/receptacle

ACCESSORIES 203618-1 66105-1 66105-4 66101-1 66101-4

203618-1 661051 661054 661061 661014

jackscrew assembly/male crimp socket 24-20 AWG crimp socket 20-24 AWG crimp socket 18-16 AWG crimp socket 18-16 AWG

AIRCRAFT SPEAKERS

These aircraft speakers are light, easily intelligible speakers constructed with titanium and neodymium material for a light, tough aircraft-worthy design. For improved safety in aerospace applications, these speakers incorporate flame-retardant materials including Kevlar® fabric. EDMO# A52FC-I FC46S-4FR EC4S-FR-I FC69S-4FR FC6S-4FR

MFR# A52FC-I FC46S-4FR EC4S-FR-I FC69S-4FR-I FC6S-4FR-I

DESCRIPTION pin cushion speaker oval speaker square speaker oval speaker, flame retardant pin cushion speaker, flame retardant

DIMENSIONS 5.25 in dia. 4 × 6 in 4 × 4 in 6 × 9 in 6 in dia.

IMPEDANCE 3.2 Ω 4Ω 8Ω 4Ω 4Ω

RATED POWER 12 watts 12 watts 12 watts 12 watts 12 watts

A52FC-I

FC46S-4FR

52

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Just the right fit. ELTs for every job.

LEFT TO RIGHT: EMERGING LIFESAVING TECHNOLOGIES 406GPS ELT, ARTEX ELT 3000, ACK E-04 ELT, ARTEX ELT 345, MCMURDO KANNAD INTEGRA ELT

FEATURED PRODUCT LINE: ELTS When it comes to ELTs, selection is important. No one ELT fits the parameters of every install job, budget, or aircraft. That’s why EDMO Distributors maintains a wide range of ELT options—to serve the unique needs of each customer. For fast installs, EDMO carries options like the versatile cost- and space-saving Artex ELT 345 and the newly released Artex ELT 3000, the smallest, lightest tri-frequency ELT with a built-in GPS interface (ARINC429 or RS 232). Conversely, some customers may require units like the McMurdo Kannad Integra ELT or the 406 ELT from Emerging Life Saving Technologies; ELTs that provide robust options like internal GPS devices, GPS antennas, or GPS nav interface backup systems. No matter the job, EDMO has the right ELT. Visit us at edmo.com or speak to our sales staff at 1.800.235.3300 and be sure to request a copy of our ELT product line brochure with an included ELT battery reference poster.

CHECK OUT OUR FULL RANGE OF ELTS & ACCESSORIES IN SECTION 8.

Wire, Cable & Accessories

Wire & Cable...................................................................................................... 56 Cable Ties.......................................................................................................... 61 Cable Tie Tools.................................................................................................. 63 Cable Tie Mounts & Cable Clamps................................................................... 63 Heat Shrink Tubing............................................................................................ 66 Spiral Wrap........................................................................................................ 69 Expandable Sleeving & Vinyl Tubing................................................................. 70 Tape................................................................................................................... 71 Bulkhead Seals & Sealant................................................................................. 71 Label & Shrink Tube Printers............................................................................. 72 Mu-Metal........................................................................................................... 76 Grom Strips....................................................................................................... 76 Grommets.......................................................................................................... 77

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

55

Wire, Cable & Accessories Wire & Cable

2

WIRE & CABLE

EDMO’s CUSTOMIZED WIRE & CABLE SERVICES

Multiple spool sizes, a variety of wire and cable. A selection to fit your every need.

WHY BUY FROM EDMO? SIMPLE: BIG STORE SELECTION, SMALL-SHOP PERSONALIZED SERVICE. At EDMO, we’re all about providing customized service—particularly when it comes to wire, cable, and laser wire marking. We offer a wide range of wire sizes available in continuous lengths, meaning that you’ll never get a spliced wire in the middle of the roll when you order from us. Plus, with large quantities of stock on hand, our customers can expect fast turnaround times. hole 1.625-1.75 in

core 3.5 in

We provide wire and cable just the way you want it. All of our in-house, custom spools have a core of 3.5 inches or larger to prevent kinking. If you need a different spool with a bigger hole or larger core, we’ll find it. You don’t have to worry about marking wire when you buy from us—we provide complete laser wire marking services and can accommodate your specifications. We also supply wire in 100-foot lengths—perfect for resale or jobs requiring unusual wire that would be impractical to inventory. And of course, larger quantities are often discounted. All of our wire and cable is sourced carefully, ensuring complete traceability. Every spool we ship is stretch-wrapped to prevent shifting on the spool and subsequent tangling. Check out all of our spool lengths online at edmo.com and order exactly what you want, or speak to one of our order desk personnel and they can help you to select the best spool for your job and shop setup.

We also carry these wire- and cable-related products—see the Electrical Interconnect section of the catalog for more details. – – – – – – – –

56

terminals splices connectors cable ties sleeving, tubing, and wraps coax connectors cutters, strippers, crimpers shrink tube, shrink tube printers

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Wire, Cable & Accessories Wire & Cable

MIL-SPEC M22759 WIRE (M22759/32-34, M22759/41-43) Airframe and avionics aerospace wire Soft annealed tin, silver or nickel-plated copper and alloy conductors Single layer and dual layer irradiated ETFE insulation Resists high PH cleaning fluids, fuels, lubricating oils and chemicals

EDMO#

MIL-SPEC

GAUGE

2

–– –– –– –– ––

CONDUCTOR

COLOR

DUAL LAYER IRRADIATED CROSS-LINKED EXTRUDED ETFE MEDIUM WEIGHT WALL 600 V / 200°C 24G/43-9 22G/43-9 20G/43-9 18G/43-9 16G/43-9 12G/43-9

M22759/43-24-9 M22759/43-22-9 M22759/43-20-9 M22759/43-18-9 M22759/43-16-9 M22759/43-12-9

24 22 20 18 16 12

silver-plated copper silver-plated copper silver-plated copper silver-plated copper silver-plated copper silver-plated copper

white white white white white white

24 22 20 18 16 14 12

nickel-plated copper nickel-plated copper nickel-plated copper nickel-plated copper nickel-plated copper nickel-plated copper nickel-plated copper

white white white white white white white

24 22 20 18 16 14 10 8 6 4 2 1

tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper

white white white white white white white white white white white white

24 22 20 18 16

tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper

white white white white white

DUAL LAYER IRRADIATED CROSS-LINKED EXTRUDED ETFE MEDIUM WEIGHT WALL 600 V / 200°C 24G/41-9 22G/41-9 20G/41-9 18G/41-9 16G/41-9 14G/41-9 12G/41-9

M22759/41-24-9 M22759/41-22-9 M22759/41-20-9 M22759/41-18-9 M22759/41-16-9 M22759/41-14-9 M22759/41-12-9

DUAL LAYER IRRADIATED CROSS-LINKED EXTRUDED ETFE MEDIUM WEIGHT WALL 600 V / 150°C 24G/34-9 22G/34-9 20G/34-9 18G/34-9 16G/34-9 14G/34-9 10G/34-9 8G/34-9 6G/34-9 4G/34-9 2G/34-9 1G/34-9

M22759/34-24-9 M22759/34-22-9 M22759/34-20-9 M22759/34-18-9 M22759/34-16-9 M22759/34-14-9 M22759/34-10-9 M22759/34-8-9 M22759/34-6-9 M22759/34-4-9 M22759/34-2-9 M22759/34-1-9

SINGLE LAYER IRRADIATED CROSS-LINKED EXTRUDED ETFE LIGHTWEIGHT WALL 600 V / 150°C 24G/32-9 22G/32-9 20G/32-9 18G/32-9 16G/32-9

M22759/32-24-9 M22759/32-22-9 M22759/32-20-9 M22759/32-18-9 M22759/32-16-9

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

57

Wire, Cable & Accessories Wire & Cable

MIL-SPEC M22759/16 HOOK-UP WIRE

2

–– QPL (Qualified Parts List) ETFE Hook-up Wire –– Standard weight EDMO#

24G/16-9 24G/16-8 24G/16-7 24G/16-6 24G/16-5 24G/16-4 24G/16-3 24G/16-2 24G/16-1 24G/16-0 22G/16-9 22G/16-8 22G/16-7 22G/16-6 22G/16-5 22G/16-4 22G/16-3 22G/16-2 22G/16-1 22G/16-0 20G/16-9 20G/16-8 20G/16-7 20G/16-6 20G/16-5 20G/16-4 20G/16-3 20G/16-2 20G/16-1 20G/16-0 18G/16-9 18G/16-8 18G/16-6 18G/16-5 18G/16-4 18G/16-3 18G/16-2 18G/16-1 18G/16-0 16G/16-9 16G/16-8 16G/16-6 16G/16-5 16G/16-4 16G/16-3 16G/16-2 16G/16-0 14G/16-9 14G/16-8 14G/16-5 14G/16-4 14G/16-2 14G/16-0 12G/16-9 12G/16-6 12G/16-5 12G/16-2 12G/16-0 10G/16-9 10G/16-0

58

MIL-SPEC

GAUGE

CONDUCTOR TYPE

COLOR

EXTRUDED ETFE MEDIUM WEIGHT 600 V / 150° C M22759/16-24-9 M22759/16-24-8 M22759/16-24-7 M22759/16-24-6 M22759/16-24-5 M22759/16-24-4 M22759/16-24-3 M22759/16-24-2 M22759/16-24-1 M22759/16-24-0 M22759/16-22-9 M22759/16-22-8 M22759/16-22-7 M22759/16-22-6 M22759/16-22-5 M22759/16-22-4 M22759/16-22-3 M22759/16-22-2 M22759/16-22-1 M22759/16-22-0 M22759/16-20-9 M22759/16-20-8 M22759/16-20-7 M22759/16-20-6 M22759/16-20-5 M22759/16-20-4 M22759/16-20-3 M22759/16-20-2 M22759/16-20-1 M22759/16-20-0 M22759/16-18-9 M22759/16-18-8 M22759/16-18-6 M22759/16-18-5 M22759/16-18-4 M22759/16-18-3 M22759/16-18-2 M22759/16-18-1 M22759/16-18-0 M22759/16-16-9 M22759/16-16-8 M22759/16-16-6 M22759/16-16-5 M22759/16-16-4 M22759/16-16-3 M22759/16-16-2 M22759/16-16-0 M22759/16-14-9 M22759/16-14-8 M22759/16-14-5 M22759/16-14-4 M22759/16-14-2 M22759/16-14-0 M22759/16-12-9 M22759/16-12-6 M22759/16-12-5 M22759/16-12-2 M22759/16-12-0 M22759/16-10-9 M22759/16-10-0

24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

1.800.235.3300 | edmo.com

tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper

white gray purple blue green yellow orange red brown black white gray purple blue green yellow orange red brown black white gray purple blue green yellow orange red brown black white gray blue green yellow orange red brown black white gray blue green yellow orange red black white gray green yellow red black white blue green red black white black

EDMO DISTRIBUTORS

Wire, Cable & Accessories Wire & Cable

EDMO#

MIL-SPEC

GAUGE

M22759/16-10-3 M22759/16-10-5 M22759/16-10-2 M22759/16-01-9 M22759/16-16-7 M22759/16-8-9 M22759/16-6-9 M22759/16-4-9 M22759/16-2-9

16 16 16 16 16 8 6 4 2

CONDUCTOR TYPE tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper tin-plated copper

COLOR orange green red white purple white white white white

2

10G/16-3 10G/16-5 10G/16-2 0G/16-9 16G/16-7 8G/16-9 6G/16-9 4G/16-9 2G/16-9

MIL-SPEC 27500 WIRE Mil-C-27500 wire is commonly used for both shielded and unshielded wire constructions in avionics, aerospace, and airframe applications. EDMO#

MIL-SPEC

GAUGE

CONDUCTORS

SHIELD

COLOR

EXTRUDED ETFE / LIGHTWEIGHT / TIN-PLATED COPPER CONDUCTOR 600 V / 150°C 24TG4T14 24TG3T14 24TG2T14 24TG1T14 22TG4T14 22TG3V14 22TG3T14 22TG2T14 22TG1T14 20TG3T14 20TG2T14 20TG1T14 18TG3T14 18TG2T14 18TG1T14 16TG4T14 16TG2T14 16TG1T14 14TG2T14 12TG1T14

M27500-24TG4T14 M27500-24TG3T14 M27500-24TG2T14 M27500-24TG1T14 M27500-22TG4T14 M27500-22TG3V14 M27500-22TG3T14 M27500-22TG2T14 M27500-22TG1T14 M27500-20TG3T14 M27500-20TG2T14 M27500-20TG1T14 M27500-18TG3T14 M27500-18TG2T14 M27500-18TG1T14 M27500-16TG4T14 M27500-16TG2T14 M27500-16TG1T14 M27500-14TG2T14 M27500-12TG1T14

24 24 24 24 22 22 22 22 22 20 20 20 18 18 18 16 16 16 14 12

4 3 2 1 4 3 3 2 1 3 2 1 3 2 1 4 2 1 2 1

single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper double, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper

white white white white white white white white white white white white white white white white white white white white

single, tinned copper single, tinned copper single, tinned copper single, tinned copper double, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper single, tinned copper

white white white white white white white white white white white

EXTRUDED ETFE / MEDIUM WEIGHT WALL / TIN-PLATED COPPER CONDUCTOR 600 V / 150°C 24TE3T14 24TE2T14 24TE1T14 22TE3T14 22TE2V64 22TE2T14 22TE1T14 20TE3T14 20TE2T14 20TE1T14 16TE3T14

M27500-24TE3T14 M27500-24TE2T14 M27500-24TE1T14 M27500-22TE3T14 M27500-22TE2V64 M27500-22TE2T14 M27500-22TE1T14 M27500-20TE3T14 M27500-20TE2T14 M27500-20TE1T14 M27500-16TE3T14

24 24 24 22 22 22 22 20 20 20 16

3 2 1 3 2 2 1 3 2 1 3

Not finding what you’re looking for? We have more MIL-SPECs and gauges of wire available online—be sure to visit us at edmo.com or give us a call. It’s likely we have what you need, or we can order it for you. Call today at 1.800.235.3300.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

59

Wire, Cable & Accessories Wire & Cable

COAXIAL CABLE/MIL-C-17

2

High temperature, high performance QPL approved MIL-C-17 coax cables for military, commercial and industrial applications.

EDMO#

MFR#

DESCRIPTION

DIELECTRIC

RG-58C/U RG-142

RG-58C/U RG-142

4450/REV C UNIVERSAL SPEC RGS142/MIL-C-17/060”G”

LDPE PTFE

RG-179

RG-179

RG-179/MIL-C-17/094”G”

PTFE

RG-316

RG-316

RGS-316/MIL-C-17/113”G”

PTFE

RG-393

M17/127-RG393

RGS-393/MIL-C-17/127”G”

PTFE

RG-400

M17/128-RG400

RGS-400/MIL-C-17/128”G”

PTFE

CONDUCTOR tinned copper silver covered copper clad steel silver covered copper clad steel silver covered copper clad steel silver covered copper silver covered copper

SHIELDING

TEMP RANGE/ VOLTAGE

tinned copper shield 2 silver covered copper shields silver covered copper shields silver covered copper

80°C/1,900vms -55°C to +200°C/ 1,900vms -55°C to +200°C/ 1,200vms -55°C to +200°C/ 1,200vms 2 silver covered copper -55°C to +200°C/ shields 5,000vms  2 silver covered copper -55°C to +200°C/ shields 1,900vms

DATA ETHERNET CABLE

These data and Ethernet cables are designed for airborne 10 and 100 Base-T Local Area Network applications where high data speeds and high temperature requirements are needed. EDMO#

MFR#

COLOR

DIELECTRIC VOLTAGE

CONDUCTOR

SHIELDING

TEMP RANGE/ VOLTAGE

MEETS ARINC SPECIFICATION 664 E10424

E10424

blue FEP jacket

1.5 KV RMS

E40424

E40424

white ETFE jacket

1.5 KV RMS

24 AWG stranded SPC, 2 pair (4-conductor) 24 AWG stranded SPC, 2 pair (4-Conductor)

silver-plated copper shield, foil shield silver-plated copper shield, foil shield

24 AWG stranded TPC, 2 pair (4-conductor) 24 AWG stranded TPC, 2 pair (4-conductor)

tin-plated copper/aluminum Mylar foil tin-plated copper/aluminum polyester foil

-55° to +200°C -55° to +200°C

MEETS ARINC SPECIFICATION 646 392404

392404

white

--

EDI-CAT5-1

071311

white / laser markable

--

-55° to +200° C -55° to +200° C

NYLON LACING CORD

Braided nylon lacing cord that meets specification MILT43435B, Type 1, size 3, finish B. This lacing cord is coated with a micro-crystalline wax with a melting point above 130°F (55°C) and non-flaking characteristics. It provides excellent knot retention but does not feel waxy to the touch. –– 500 yard length

60

1.800.235.3300 | edmo.com

EDMO# BLK STRING WHT STRING

MFR# 103-2 BLACK HW 103-2 Natural HW

MIL-SPEC MIL-T43435B MIL-T43435B

BLK STRING

EDMO DISTRIBUTORS

Wire, Cable & Accessories Cable Ties

CABLE TIES LOW PROFILE CABLE TIES Low profile Cobra cable ties in UV black and natural 6/6 nylon. Cobra cable ties provide parallel entry into any ultra low-profile latching head, a snag proof, smooth exterior, and a pocket that captures the trimmed stub. –– 50 lb tensile strength

2

COBRA CABLE TIES

EDMO#

MFR#

C750LP0C C750LP0M C750LP9C C750LP9M

C7-50-LP-0C C7-50-LP-0C C7-50-LP-9C C7-50-LP-9M

EDMO#

MFR#

MIL-SPEC

COLOR

MS3376-3-0 MS3376-3-0 MS336723-9 MS336723-9

UV black UV black natural natural

DIMENSIONS (IN) 7.5 × 0.178 7.5 × 0.178 7.5 × 0.178 7.5 × 0.178

QTY PER PACK 100 1,000 100 1,000

TY-RAP CABLE TIES THOMAS & BETTS TY-RAP cable ties are self-locking and have a low-profile, oval head that is less likely to snag on uneven surfaces and is easier to pull through bulkheads. The non-magnetic stainless steel locking device provides just the right amount of holding strength and the structure of the cable tie ensures a wide array of positions with precise adjustments when tightened around a cable bundle because it does not rely on notches. –– No notches for precise adjustment –– Turned-up tail allows the user to orient the tie as needed –– Uses a ribbed, stippled friction surface to prevent slippage –– Rounded edges prevent damage to cable –– Sold in quantities of 1,000

MIL-SPEC

COLOR

DIMENSIONS (IN)

MAX WIRE BUNDLE DIA. (IN)

18 LB MIN. TENSILE STRENGTH TY232M TY232MX TY234M TY23M TY23MX

TY232M TY232MX TY234M TY23M TY23MX

MIL-SPEC MS3367-4 MIL-SPEC MS3367-4-0

natural black natural natural black

8 × 0.086 8 × 0.086 14 × 0.086 3.62 × 0.093 3.62 × 0.093

2 2 4 0.625 0.625

natural black

5.5 × 0.140 5.5 × 0.140

1.125 1.125

natural black natural natural black

8.19 × 0.140 8.19 × 0.140 14.5 × 0.140 11.1 × 0.140 11.1 × 0.140

2 2 4 3 3

natural black natural black

7.31 × 0.185 7.31 × 0.185 14.2 × 0.187 14.2 × 0.187

1.75 1.75 4 4

natural black

13.4 × 0.270 13.4 × 0.270

3.5 3.5

30 LB MIN. TENSILE STRENGTH TY24M TY24MX

TY24M TY24MX

MIL-SPEC MS3367-5 MIL-SPEC MS3367-5-0

40 LB MIN. TENSILE STRENGTH TY242M TY242MX TY244M TY26M TY26MX

TY242M TY242MX TY244M TY26M TY26MX

-

50 LB MIN. TENSILE STRENGTH TY25M TY25MX TY28M TY28MX

TY25M TY25MX TY28M TY28MX

MIL-SPEC MS3367-1-9 MIL-SPEC MS3367-1-0 MIL-SPEC MS3367-2-9 MIL-SPEC MS3367-2-0

120 LB MIN. TENSILE STRENGTH TY27M TY27MX

EDMO DISTRIBUTORS

TY27M TY27MX

MIL-SPEC MS3367-3 MIL-SPEC MS3367-3-0

1.800.235.3300 | edmo.com

61

Wire, Cable & Accessories Cable Ties

STANDARD CABLE TIES

2

HELLERMANNTYTON CORP HellermannTyton Standard Cable Ties have interior serrations to increase gripping power and a smooth head design that ensures high tensile strength with low insertion force needed. –– Turned-up tail allows the user to orient the tie as needed –– Can be applied by hand or with tensioning tools –– Standard cable ties sold in quantities of 1,000, Heavy Duty cable ties sold in quanitites of 50

EDMO#

MFR#

MIL-SPEC

COLOR

DIMENSIONS (IN)

MAX WIRE BUNDLE DIA. (IN)

18 LB MIN. TENSILE STRENGTH T18L T18L-0 T18R T18R-0 T18S T18S-0

T18L9M4 T18L0M4 T18R9M4 T18R0M4 T18S9M4 T18S0M4

MS3367-4-9 -

white black natural black natural black

8 × 0.1 8 × 0.1 4 × 0.1 4 × 0.1 3.27 × 0.09 3.27 × 0.09

2.17 2.17 0.86 0.86 0.63 0.63

natural natural black

7.48 × 0.14 5.8 × 0.14 5.8 × 0.14

1.97 1.38 1.38

natural black black

14.6 × 0.16 14.6 × 0.16 14.6 × 0.16

4.13 4.13 4.13

natural black natural black natural black

11.8 × 0.18 11.8 × 0.18 15.35 × 0.18 15.35 × 0.18 7.9 × 0.18 7.9 × 0.18

3.35 3.35 4.33 4.33 1.97 1.97

natural black

15.24 × 0.30 15.24 × 0.30

4.13 4.13

30 LB MIN. TENSILE STRENGTH T30L9M4 T30R T30R-0

T30L9M4 T30R9M4 T30R0M4

MS3367-5-9 -

40 LB MIN. TENSILE STRENGTH T40L T40L-0 T40R-0

T40L9M4 T40L0M4 T40R0M4

-

50 LB MIN. TENSILE STRENGTH T50I T50I-0 T50l T50L-0 T50R T50R-0

T50I9M4 T50I0M4 T50L9M4 T50L0M4 T50R9M4 T50R0M4

MS3367-2-9 -

HEAVY DUTY CABLE TIES 120 LB MIN. TENSILE STRENGTH T120R T120R-0

T120R9K2 T120R0K2

15.25 15.25

MOUNTABLE CABLE TIES HELLERMANNTYTON CORP The T-series mounting cable ties have a builtin mounting hole that, once fastened around the cables, can be secured to the panel with a screw or bolt. –– One-piece, all plastic ties –– Serrated interior provides better grip on the EDMO# MFR# SIZE cables 18 LB MIN. TENSILE STRENGTH –– Plastic pawl closure T18MR T18MR9C2 4 IN –– Sold in quantities 50 LB MIN. TENSILE STRENGTH T50MR T50MR-0

T50MR9M4 T50MR0M4

8 IN 8 IN

COLOR

DIMENSIONS (IN)

MAX WIRE BUNDLE DIA.(IN)

white

4.33 × 0.10

0.124

natural black

8.46 × 0.18 8.46 × 0.18

1 1.77

IDENTIFICATION CABLE TIES HELLERMANNTYTON CORP Polyamide 6.6 cable ties keep cables tidy and easy to identify. The ties have a large flat tab that is ideal for imprinting or writing necessary information. The tie closes with a plastic pawl. –– Plastic pawl tie closure –– Sold in quantities of 200

EDMO# IT18R

SIZE (IN)

COLOR

DIMENSIONS (IN)

MAX WIRE BUNDLE DIA. (IN)

IT18R9L4

4

natural

3.94 × 0.98 × 0.32

0.75

natural black

7.99 × 0.18 × 0.51 7.99 × 1.1 × 0.51

1.75 1.75

50 LB MIN. TENSILE STRENGTH IT50R IT50R-0

62

MFR#

18 LB MIN. TENSILE STRENGTH

IT50R9M4 8 IT50R0C2 8

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Wire, Cable & Accessories Cable Tie Tools

CABLE TIE TOOLS

CABLE TIE MOUNTS & CABLE CLAMPS

EVO 7 CABLE TIE GUN EDMO# EVO7 MFR# 110-70083 The EVO 7 Cable Tie cutter uses tension/lock/cut (TLC) technology to provide precise cable tie cutting without creating the protruded cut edges caused by conventional cable tie cutters that stretch the tie as they cut. The EVO 7 provides adjustable tensioning with a locking mechanism to keep the tension setting in place—ensuring a flush cut, each and every time. This advanced cutting technology is paired with a user-tested ergonomic design with soft-grip, non-slip, air cushioning on the handle and trigger for the utmost in user comfort.

CABLE TIE MOUNTS HELLERMANNTYTON CORP The CTM series of cable tie mounts provide stability to installed wire bundles. These mounts accommodate the T18 through T50 series cable ties. –– Polyamide 6.6 construction –– Each mount is secured with a single #6 screw –– 100 mounts per package

EDMO#

HELLERMANNTYTON CORP

FOR 18/50 LB CABLE TIES CTM-0 CTM-1 CTM-1-0 CTM-2 CTM-2-0 CTM-3 CTM-3-0

TWT-1

CABLE TIE CUTTER

EDMO# MG-1300 MFR# MG-1300 Cable tie cutter with two safety guards that slide behind the cable tie strap for simple removal without the risk of damaging bundled cables or wires. Ergonomic, cushioned grips.

CTM010C2 CTM110M4 CTM10M4 CTM210M4 CTM20M4 CTM310M4 CTM30C2

COLOR

white white black white black white black

DIMENSIONS (IN)

MOUNTING HOLE (IN)

0.578 × 0.375 × 0.266 0.579 × 0.370 × 0.266 0.579 × 0.370 × 0.266 0.86 × 0.61 × 0.37 0.86 × 0.61 × 0.37 0.858 × 0.609 × 0.374 0.858 × 0.609 × 0.374

0.15 0.185 0.185 0.173 0.18 0.189 0.189

0.864 × 0.61 × 0.37

0.25

FOR 18/120 LB CABLE TIES CTM-4

CTM410C2

white

HELLERMANNTYTON CORP

WIRE SPOON THREADER

These four-way mounting cable tie bases accommodate several different sizes of cable ties. Ties can be inserted from all four sides of the mount. Mounts can be secured to intended surfaces with two screws, adhesive backing, or both if needed. –– Adhesive backing consists of synthetic rubber with a polyethylene foam and synthetic rubber base

MB-5A

MDA-3792

For more information on our selection of cable tie tools, please visit page 120.

MB-5A-0 EDMO#

MFR#

COLOR

DIMENSIONS (IN)

MOUNTING HOLE (IN)

FOR 18/30 LB CABLE TIES MB-3A MB-3A-0 MB-4A MB-4A-0 MB-5A MB-5A-0

EDMO DISTRIBUTORS

MFR#

CABLE TIE MOUNTS - 4-WAY

MG-1300

EDMO# MDA-3792 MFR# MDA-3792,35250 Wire spoon threads wires into already tied harnesses. –– 300 Series stainless steel construction –– Made in America for superior quality

CTM-3-0

CTM-4

TWIST CUT CABLE TIE GUN EDMO# TWT-1 MFR# TWT-1 The Twist Cut Cable Tie Gun is an efficient and economically priced mechanical twist tool that is light and small enough to fit into a pocket.

2

HELLERMANNTYTON CORP

MB3A10M4 MB3A0C2 MB4A10H4 MB4A0H4 MB5A10F4 MB5A0C2

white black white black white black

0.75 × 0.75 × 0.18 0.75 × 0.75 × 0.18 1.12 × 1.12 × 0.22 1.12 × 1.12 × 0.22 1.49 × 1.49 × 0.28 1.49 × 1.49 × 0.28

1.800.235.3300 | edmo.com

0.12 0.12 0.18 0.18 0.19 0.19

63

Wire, Cable & Accessories Cable Tie Mounts & Cable Clamps

2

CLAMP 90-DEGREE Adjustable 90° clamps for cable bundle diameters from 1/8-inch to 2-3/16-inch. They open at a 90° angle for easy installation and accept wire bundles of varying sizes—especially when used in conjunction with plastic cable ties. Qualifies to Mil spec M23190/1. EDMO# NMC1005-5 NMC1005-4 NMC1005-3

MFR#

DIA. (IN)

NMC1005-5 NMC1005-4 NMC1005-3

7/8 - 1 1/4 11/16 -15/16 1/2 - 11/16

WEDGED CABLE CLAMPS Cushioned loop clamps (Adel clamps) with an aluminum body and chloroprene rubber cushion (black with blue stripe) with wedge.

EDMO# 21919WDG10 21919WDG11 21919WDG12 21919WDG13 21919WDG14 21919WDG15 21919WDG16 21919WDG17 21919WDG18 21919WDG19 21919WDG2 21919WDG20 21919WDG21 21919WDG22 21919WDG23 21919WDG24 21919WDG25 21919WDG26 21919WDG3 21919WDG32 21919WDG4 21919WDG5 21919WDG6 21919WDG7 21919WDG8 21919WDG9

64

MFR#

DIA. (IN)

MS21919WDG10 21919WDG11 MS21919WDG12 MS21919WDG13 MS21919WDG14 21919WDG15 MS21919WDG16 MS21919WDG17 MS21919WDG18 MS21919WDG19 21919wdg2 MS21919WDG20 MS2191WDG21 MS21919WDG22 21919WDG23 MS21919WDG24 MS21919WDG25 MS21919WDG26 MS21919WDG3 MS21919WDG32 MS21919WDG4 MS21919WDG5 MS21919WDG6 MS21919WDG7 MS21919WDG8 MS21919WDG9

5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1/8 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 3/16 2 1/4 5/16 3/8 7/16 1/2 9/16

1.800.235.3300 | edmo.com

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY. EDMO carries a wide range of products, including custom options, so if you’re not finding what you need, give us a call at 1.800.235.3300 or visit edmo.com. We’re constantly updating our inventory so there’s a good chance we will have what you’re looking for.

EDMO DISTRIBUTORS

ICO RALLY provides a wide range of electronic products, materials, and related services with a commitment to achieving the highest level of customer satisfaction. With over 60 years of industry experience, ICO RALLY designs, develops, manufactures, and distributes electronic materials, components, and specialty products to the tech industry.

Wire, Cable & Accessories Heat Shrink Tubing

HEAT SHRINK TUBING 2

HEAT-SHRINKABLE POLYOLEFIN TUBING HIX Very popular general-purpose heat-shrinkable tubing, HIX tubing is used for insulating, jacketing, bundling, and identification. It is both abrasion and solvent resistant and provides a longitudinal shrinkage of less than 6%. –– –– –– ––

Applicable specifications: SAE-AMS-DTL-23053/5, class 1 and 3 UL/CUL file number: E52612 (VW-1) Operating temperature range: -67°F (-55°C) to 275°F (135°C) Shrink ratio: 2:1

EDMO#

MFR#

–– Shrink temperature: 250°F (121°C) –– Standard colors: Type 1 (flame-retardant) black, white, red, blue, yellow, green; Type 2 (non-flame-retardant) clear only –– Sold in 100-foot lengths or priced per foot

MIN. EXPANDED/ RECOVERED ID

RECOVERED WALL THICKNESS

BLACK - 100 FT HIXR-3/64 HIXR-1/16 HIXR-3/32 HIXR-1/8 HIXR-3/16 HIXR-3/16 HIXR-1/4 HIXR-3/8 HIXR-1/2 HIXR-3/4 HIXR-1 HIXR-2 HIXR-3

HIXR-3/64 HIR-1/16 BLACK SPOOLED HIX-3/32 BL HIX-1/8 BLACK SPOOLED HIX-3/16 BLACK SPOOLED HIX-3/16 BLACK SPOOLED HIX-1/4 BLACK SPOOLED HIX-3/8 BLACK SPOOLED HIX-1/2 BLACK SPOOLED HIX-3/4 HIX-1 HIXR-2 HIX-3

0.046/0.023 0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500 2.000/1.000 3.000/1.500

HIXR-1/16W HIXR-3/32W HIXR-1/8W HIXR-3/16W HIXR-3/16W HIXR-1/4W HIXR-3/8W HIXR-1/2W HIXR-3/4W HIXR-1WH HIXR-2WH HIXR-3WH

HIX-1/16 WHITE SPOOLED HIX-3/32 WHITE SPOOLED HIXR-1/8 HIX-3/16 WHITE SPOOLED HIX-3/16 WHITE SPOOLED HIX-1/4 WHITE HIXR-3/8W HIXR-1/2W HIX-3/4W HIXR-1WH HIX-2 HIX-3

0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500 2.000/1.000 3.000/1.500

HIXR-1/16C HIXR-3/32C HIXR-1/8C HIXR-3/16C HIXR-3/16C HIXR-1/4C HIXR-3/8C HIXR-1/2C HIXR-3/4C HIXR-1C

HIX-1/16 HIX-3/32 CLEAR SPOOLED HIX-1/8 HIX-3/16 HIX-3/16 HIXR-1/4C HIX-3/8 CLEAR SPOOLED HIX-1/2 CLEAR SPOOLED HIX-3/4 CLEAR SPOOLED HIX-1” CLEAR SPOOLED

0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

0.016 0.017 0.020 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0.045 0.050

WHITE 0.017 0.020 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0.045 0.050

CLEAR - 100 FT 0.017 0.020 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

BLACK - PRICED PER FT

66

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Wire, Cable & Accessories Heat Shrink Tubing

EDMO#

MFR#

MIN. EXPANDED/ RECOVERED ID

HIX-1/16 BLACK HIX-3/32 BLACK HIX-3/32 BLACK HIX-1/8 BLACK HIX-3/16 BLACK HIX-1/4 BLACK HIX-3/8 BLACK HIX-1/2 BLACK HIX-3/4 BLACK HIX-1 HIX-2 HIX-3” BLACK STICKS

0.063/0.031 0.093/0.046 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500 2.000/1.000 3.000/1.500

HIX-3/64WH HIX-1/16WH HIX-3/32WH HIX-1/8WH HIX-3/16WH HIX-1/4WH HIX-3/8WH HIX-1/2WH HIX-3/4WH HIX-1WH

HIX-3/64 WHITE HIX-1/16 WHITE HIX-3/32 WHITE HIX-1/8WHITE HIX-3/16 WHITE HIX-1/4 WHITE HIX-3/8 WHITE HIX-1/2WHITE HIX-3/4WH HIX-1WH

0.046/0.023 0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

HIX-3/64CL HIX-1/16CL HIX-3/32CL HIX-1/8CL HIX-3/16CL HIX-1/4CL HIX-3/8CL HIX-1/2CL HIX-3/4CL HIX-1CL

HIX-3/64 HIX-1/16CL HIX-3/32CL HIX-1/8CLEAR HIX-3/16CL HIX-1/4 CLEAR HIX-3/8 CLEAR HIX-1/2CLEAR HIX-3/4 CL HIX-1CLEAR

0.046/0.023 0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

0.017 0.020 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035 0.045 0.050

2

HIX-1/16 HIX-3/32 HIX-3/32 HIX-1/8 HIX-3/16 HIX-1/4 HIX-3/8 HIX-1/2 HIX-3/4 HIX-1 HIX-2 HIX-3

RECOVERED WALL THICKNESS

WHITE - PRICED PER FT 0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

CLEAR - PRICED PER FT 0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

RED - PRICED PER FT HIX-3/64RE HIX-1/16RE HIX-3/32RE HIX-1/8RE HIX-3/16RE HIX-1/4RE HIX-3/8RE HIX-1/2RE HIX-3/4RE HIX-1RE

HIX-1/16RE HIX-3/32RE HIX-1/8RE HIX-3/16RE HIX-1/4RE HIX-3/8 RED HIX-1/2RE HIX-3/4RE HIX-1” RED

0.046/0.023 0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

YELLOW - PRICED PER FT HIX-3/64YE HIX-1/16YE HIX-3/32YE HIX-1/8YE HIX-3/16YE HIX-1/4YE HIX-3/8YE HIX-1/2YE HIX-3/4YE HIX-1YE

HIX-3/64YE HIX-1/16YE HIX-3/32 YELLOW STICKS HIX-1/8YE HIX-3/16YE HIX-1/4YE HIX-3/8YE HIX-1/2 YELLOW HIX-3/4YE HIX-1YE

EDMO DISTRIBUTORS

0.046/0.023 0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

0.016 0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

1.800.235.3300 | edmo.com

67

Wire, Cable & Accessories Heat Shrink Tubing

EDMO#

MFR#

MIN. EXPANDED/ RECOVERED ID

RECOVERED WALL THICKNESS

2

GREEN - PRICED PER FT HIX-3/16GR HIX-1/2GR HIX-3/4GR

HIX-3/16GR M23053/5-108-5 M23053/5-109-5

0.188/0.093 0.500/0.250 0.750/0.375

HIX-1/16BL HIX-3/32BL HIX-1/8BL HIX-3/16BL HIX-1/4BL HIX-3/8BL HIX-1/2BL HIX-3/4BL HIX-1BL

HIX-1/16BL IC6240577 HIX-1/8BL HIX-3/16BL HIX-1/4BL HIX-3/8 M23053/5-108-6 HIX-3/4BL

0.063/0.031 0.093/0.046 0.125/0.063 0.188/0.093 0.250/0.125 0.375/0.188 0.500/0.250 0.750/0.375 1.000/0.500

0.020 0.025 0.030

BLUE - PRICED PER FT

HW3X The HW3X series consists of heat-shrinkable polyolefin tubing that provides greater protection under rough environmental conditions with heavy-wall, semi-rigid material that has excellent insulating, abrasion-resisting, and strain-relief properties. This product is supplied with sealant that provides waterproofing and protection in underwater or underground conditions. Seals may be made over lead, steel, aluminum, copper, and all standard plastic and elastomeric insulating materials. –– Operating temperature range: -67°F (-55°C) to 194°F (90°C) –– Recommended heat gun: 500°F (260°C) –– Shrink ratio: 3 to 1 –– Shrink temperature: 250°F (121°C –– Standard colors: black –– 48-inch lengths –– SAE-AMS-DTL23053/15, Class 1 EDMO# HW3X04S48B HW3X07S48B HW3X11S48B

MFR#

MIN. EXPANDED/ RECOVERED ID

HW3X-04-S- 0.400/0.150 48-BLK HW3X07S48B 0.750/0.220 HW3X1.100/0.375 11-S-48 BLACK

RECOVERED WALL THICKNESS 0.060 0.095 0.120

0.017 0.020 0.020 0.020 0.025 0.025 0.025 0.030 0.035

–– Recommended heat gun: 500°F (260°C) –– Color: gray –– SAE-AMS-DTL-23053/5, class 1 and 3 EDMO# HLT-1/4 HLT-1/8 HLT-3/8

HLT tubing is heat-shrinkable, very flexible thin-wall tubing made from flame-retardant polyolefin. It has a low-shrink temperature and is ideal for insulation, identification, strain relief, wire bundling, and color-coding. –– UL/CUL file number: E52612 (VW-1) –– Operating temperature range: -67°F (-55°C) to 275°F (135°C) –– Shrink ratio: 2:1 –– Shrink temperature: 176°F (80°C)

68

1.800.235.3300 | edmo.com

HLT-1/4 HLT-1/8 M23053/5307-8

MIN. EXPANDED/ RECOVERED ID 0.250/0.125 0.125/0.063 0.375/0.188

RECOVERED WALL THICKNESS 0.025 0.020 0.025

HAT HAT is a thin-wall, heat shrinkable polyolefin with a thermoplastic adhesive coating at the interior that adheres to a wide variety of plastic, rubber, and metal surfaces. When heated, it shrinks to 50% of its supplied diameter to conform to the object that it covers. Once cooled, it returns to its original state and forms a moisture-resistant bond between the tubing and substrate. –– Applicable specifications: SAE-AMS-DTL-23053/4, class 2 –– UL file number: E52612 (excludes clear) –– Operating temperature range: -67°F (-55°C) to 230°F (110°C) –– Shrink ratio: 2:1 –– Shrink temperature: 250°F (121°C) EDMO#

HLT

MFR#

HAT-1/8 HAT-1/4

MFR# HAT-1/8 HAT-1/4

MIN. EXPANDED/ RECOVERED ID 0.125/0.063 0.250/0.125

RECOVERED WALL THICKNESS 0.021 0.030

EDMO DISTRIBUTORS

Wire, Cable & Accessories Spiral Wrap

FABRIC HEAT SHRINK TUBING

EDMO# HSF-12/6 HSF3X-18/6 HSF-20/10 HSF-30/15 HSF3X30/10 HSF-40/20 HSF-50/25 HSF3X60/20 HSF3X60/30 HSF-70/35

MFR#

MINIMUM EXPANDED/ RECOVERED ID

HSF-12/6 BLACK SPLD HSF3X-18/6 HSF-20/10 BLACK SPLD HSF-30/15 HSF3X30/10 HSF-40/20 HSF-50/25 HSF3X60/20 HSF3X60/30 HSF-70/35

0.472/0.236 0.709/0.236 0.787/0.394 1.181/0.591 1.181/0.394 1.575/0.787 1.969/0.984 2.362/0.787 2.362/1.181 2.756/1.378

2

Heat shrinkable fabric (HSF) tubing is woven from black strands of polyester and polyolefin. It is ideal for applications including noise suppression and abrasion resistance for components such as rubber hoses, harnesses, and plastic pipe as it is very flexible and easy to install over awkward materials like bent hoses or pre-formed pipes. HSF is also Halogen free. –– Operating temperature range: -40°F (-40°C) to 257°F (125°C) –– Shrink ratio: 2:1 and 3:1 –– Shrink temperature: 275°F (135°C) –– Recommended heat gun: 500°F (260°C) –– 0 .040 in recovered wall thickness –– Standard colors: black –– Standard shipping length: spools –– Sold in 50-foot spools

spool

SPIRAL WRAP SPIRAL WRAP TUBING

Spiral wrap tubing provides solid grip with its torsional cut and rigid profile. It retains strength under repeated flexing and bending and follows wire paths easily, resulting in tidy, free-running cable bundles. Spiral wrap is also easy to remove and re-apply when troubleshooting is necessary. Available in polyethylene and PTFE.

POLYETHYLENE: –– A versatile, low-cost material. –– Black polyethylene is also low-cost but also contains ultra-violet inhibitors, designed for outdoor use.

black

natural

PTFE: –– Primarily for high temperature applications, it has a low operating temperature and is not affected by organic solvents or acids. –– Sold in 25-foot lengths, priced per 100 ft EDMO#

MFR#

NOMINAL OD/WALL THKNS (IN)

NOMINAL

MAX. BUNDLE SIZE (IN)

PTFE MATERIAL NATURAL SWT-1/8 SWT-1/8XXT SWT-3/16 SWT-1/4 SWT-5/16 SWT-3/8 SWT-1/2 SWT-3/4 SWT-1

SWT-1/8 NATURAL SWT-1/8XXT SWT-3/16 NATURAL SWT-1/4 NATURAL SWT-5/16 XT NATURAL SWT-3/8 NATURAL SWT-1/2 NATURAL SWT-3/4 3673700

0.125/0.030 0.125/0.016 0.188/0.030 0.250/0.030 0.3125/-0.375/0.030 0.500/0.030 0.750/0.040 1.000/0.040

0.250 0.250 0.250 0.375 -0.438 0.563 0.875 1.000

0.5 0.5 1.0 2.0 -2.5 3.0 4 6.0

SWT-1/2B SWT-1BK

0.500/0.030 1.000/0.040

0.563 1.000

3.0 6.0

BLACK SWT-1/2B SWT-1BK

POLYETHYLENE MATERIAL NATURAL Occasional random lengths. Size varies on specific bundles depending on desired flexibility and protection.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

69

Wire, Cable & Accessories

Expandable Sleeving & Vinyl Tubing

2

EDMO# SWP-1/8 SWP-3/16 SWP-1/4 SWP-3/8 SWP-1/2 SWP-3/4 SWP-1

MFR#

NOMINAL OD/WALL THKNS (IN)

NOMINAL

MAX. BUNDLE SIZE (IN)

SWP-1/8 NATURAL SWP-3/16 NATURAL SWP-1/4 NATURAL SWP-3/8 NATURAL SWP-1/2 NATURAL SWP-3/4 SWP-1” NATURAL

0.125/0.031 0.188/0.031 0.250/0.058 0.375/0.058 0.500/0.058 0.750/0.065 1.000/0.100

0.250 0.250 0.313 0.438 0.563 0.875 0.875

0.5 1.5 2.0 3.0 4.0 6.0 8.0

SWP-1/8BK SWP-3/16 BLACK SWP-1/4 BLACK SWP-3/8 BK SWP-1/2 BK SWP-3/4BK SWP-1BK

0.125/0.031 0.188/0.031 0.250/0.058 0.375/0.058 0.500/0.058 0.750/0.065 1.000/0.100

0.250 0.250 0.313 0.438 0.563 0.875 0.875

0.5 1.5 2.0 3.0 4.0 6.0 8.0

BLACK SWP-1/8BK SWP-3/16BK SWP-1/4BK SWP-3/8BK SWP-1/2BK SWP-3/4BK SWP-1BK

Occasional random lengths. Size varies on specific bundles depending on desired flexibility and protection.

EXPANDABLE SLEEVING & VINYL TUBING ICO-FLEX EXPANDABLE SLEEVING ICO-FLEX is lightweight, expandable, self-fitting, monofilament sleeving that is designed to encapsulate and protect cable bundles and wire assemblies. This sleeving adjusts to irregular surfaces and contours and is also abrasion resistant. Available in two versions: flame retardant (XPF) or non-flame retardant polyester monofilament (XPNF). –– Operating temperature range: -94 to 250°F (-70 to 125°C) –– Flammability: VW-1 EDMO#

MFR#

NOMINAL ID (IN)

–– Colors: black or white –– Sold in 100-foot length

BUNDLE SIZE RANGE (MIN – MAX) (IN)

SPOOL LENGTH

NON-FLAME RETARDANT POLYESTER EXPANDABLE SLEEVING BLACK XPNF-1/4

XPNF-1/4

0.250

0.125 – 0.375

1000

*

FLAME RETARDANT POLYESTER EXPANDABLE SLEEVING BLACK XPF-1/8 XPF-1/4 XPF-3/8 XPF-1/2 XPF-3/4 XPF-1 1/4 XPF-1 3/4 XPF-2

XPF-1/8 XPF-1/4 BLACK XPF-3/8 BLACK XPF-1/2 BLACK XPF-3/4 BLACK XPF-1 1/4 BLACK XPF-1 3/4 BLACK XPF-2

0.125 0.250 0.375 0.500 0.750 1.250 1.750 2.00

0.094 – 0.125 0.125 – 0.375 0.250 – 0.625 0.250 – 0.750 0.500 – 1.250 0.750 – 1.500 1.250 – 2.500 1.500 – 3.000

100 100 100 100 100 100 100 100

XPFW-1/8 XPFW-1/4 XPFW-3/8

XPFW-1/8 6169120 XPF-3/8 WHITE

0.125 0.250 0.375

0.094 – 0.125 0.125 – 0.375 0.250 – 0.625

100 100 100

XPFW-1/2 XPFW-3/4 XPFW-1 1/4

XPF-1/2 WHITE XPF-3/4 WHITE XPFW-1 1/4

0.500 0.750 1.250

0.250 – 0.750 0.500 – 1.250 0.750 – 1.500

100 100 100

WHITE

Flame retardant sleeving is identified with colored tracers. Non-flame retardant sleeving is a solid color. Products not shown to scale.

70

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Wire, Cable & Accessories Tape

AERO BRAIDED SLEEVING MINI ROLL

EDMO#

MFR# PFA-PFR-1-WT-0100 PFA-PFR-1-WT-0200 PFA-PFR-3-WT-0100

1/4 in × 100 1/4 in × 200 1/2 in × 100

BLACK W/ WHITE TRACER PFR1BT0200 PFR3BT0100 PFR4BT0075 PFR6BT0050

3-PFA-PFR-1-BT-0200 PFA-PFR-3-BT-0100 PFA-PFR-4-BT-0075 PFA-PFR-6-BT-0050

1/4 in × 200 1/2 in × 100 3/4 in × 75 1-1/4 in × 50

Additional sizes available. Call to order.

VINYL TUBING The SLV-40 vinyl tubing is extremely flexible and designed primarily for low temperature applications down to -85°F (-65°C), with a continuous rating of 175°F (80°C). Best used in applications where general-purpose vinyl loses its flexibility. Meets MIL-I-7444 specification. –– Operating temperature range: -85°F (-65°C) to 175°F (80°C) –– Standard colors: black and clear (all parts listed in table are clear) –– Standard length: 100 ft EDMO# SLV-40-1/8 SLV-403/16 SLV-40-1/4 SLV-40-3/8 SLV40-7/16 SLV-40-1/2 SLV40-9/16 SLV-40-5/8 SLV-40-3/4 SLV-40-7/8 SLV-40-1

MFR# SLV-40-1/8 SLV-40-5 CLEAR SLV-40-1/4 SLV-40-3/8 CLEAR SLV-40-7/16 CLEAR SLV-40-1/2 CLEAR SLV-40-9/16 CLEAR SLV-40-5/8 SLV-40-3/4 SLV-40-7/8 CLEAR SLV-40-1

EDMO DISTRIBUTORS

EDMO# 604271-2 MFR# 6042712 Premium grade vinyl electrical insulating tape with strong adhesive and elastic backing that resists water and easily conforms to irregular surfaces—even in cold temperatures. –– Rubber resin adhesive with polyvinyl chloride backing –– Temperature range: -0.4°F – 221°F (-18°C 105°C), 221°F (105°C) –– Dielectric strength: 1150 Millivolt –– Dimensions: 0.75 in × 7 mil × 66 ft

DIMENSIONS (FT)

WHITE W/ BLACK TRACER PFR1WT0100 PFR1WT0200 PFR3WT0100

ELECTRICAL TAPE - BLACK

2

Protect-Fast™ AERO Braided Sleeving is a tough, lightweight method used to contain and protect cable assemblies, hoses, and wire harnesses from abrasion and cutting. The PFR material is MIL-202 and FAR25 approved, gasoline resistant, and has a temperature rating from -103°F to 257°F (-75°C to 125°C). –– Flammability rating FAR 25 UL VW-1 –– Expansion 150% sleeve, 25% overlap wrap –– Melt temperature 545°F (285°C) –– High resistance to chemicals, corrosion, and abrasion –– Recommended cutting: hot knife –– Low and medium outgassing

TAPE

NOMINAL ID/WALL THKNS (IN) 0.125/0.020 0.1875/-0.250/0.020 0.375/0.025 0.438/0.025 0.500/0.025 0.562/0.030 0.625/0.030 0.750/0.035 0.875/0.035 1.000/0.035

FUSION TAPE - COLD SHRINK

EDMO# 605980-1 MFR# 605980-1 Cold shrink fusion electrical tape does not require any heat or open flame when applied and doesn’t transfer any adhesive to the materials it is applied to (making for minimal cleanup when removed). This tape forms a tough, homogeneous, watertight skin around the substrate, even when immersed in water. This tape is resistant to abrasion, impact, sunlight, and most chemicals without the need for overwrap in most applications and it easily covers irregular surfaces. –– Operating Temp: -40°F - 212°F (-40°C - 100°C), 226°F (130°C) –– Dimensions: 0.75 in × .020 in × 30 ft

SILICON FUSION TAPE

EDMO# 608036-1 MFR# 608036-1 Extruded from high performance silicone rubber, silicon fusion tape is self-adhering and self-fusing, curing into a solid rubber insulator at room temperature in 24 hours or less, resulting in an inseparable barrier that resists moisture, ozone, and corona at temperatures up to 260° C. Its high conductivity allows for rapid heat dissipation, resulting in lower temperature rise on all types of connections. –– Operating temp: 140°F – 390°F (-60°C 200°C), 500°F (260°C) max –– Dimensions: 1 in × 0.020 in × 36 ft

1.800.235.3300 | edmo.com

71

Wire, Cable & Accessories

2

Bulkhead Seals & Sealant

BULKHEAD SEALS & SEALANT

LABEL & SHRINK TUBE PRINTERS

BULKHEAD SEALS

EPSON LABELWORKS PX900 HANDHELD LABEL PRINTER

Nylon bulkhead seals for use with electrical harnesses or tubing passed through bulkheads in pressurized and non-pressurized aircraft. Available in natural color.

NMCS45A-11 EDMO# NMCS45A-11 NMCS45A-14 NMCS45A-13 NMCS45A-12

NMCS45A-14 MFR# NMC S45A-11 NMC S45A-14 NMC S45A-13 NMC S45A-12

NMCS45A-12 SHAPE square square elliptical elliptical

NMCS45A-13 SIZE (IN)

1-f1/8 1-3/8 3/4 1/2

AEROSPACE SEALANT/AMS-S-8802B

EDMO# AC236B1/2 MFR# AC-236 B-1/2 AC-236 Class B is a two-component, manganese dioxide cured, liquid polysulfide polymer aerospace sealant that provides excellent fuselage seals. AC-236 Class B maintains its flexibility and bond strength on most metal substrates like aluminum, stainless steel, steel, and many coatings under extremes of temperature, weathering and stress. The mixed compound is a thixotropic paste easily applied by extrusion, injection gun, or spatula. It has excellent tooling properties. Perfect sealant for antenna installations. Application Life & Cure Time (@ 75ºF, 50% relative humidity). –– Minimum application life: 1/2 hour –– Typical tack-free time: 8 hours –– Typical cure time to 35A4: 24 hours –– Shelf life: 9 months from package/mixed may be stored under refrigeration as follows: 15 days at -20°F, 30 days at -40°F –– Weight: 25 grams

RTV ADHESIVE/SEALANT DOW CORNING Dow Corning® 3145 RTV MIL-A-46146 is designed to provide long term bonding and to protect against moisture, environmental factors, mechanical and thermal shock as well as vibration. Typical applications include: bonding of sensitive electronic components and sub-assemblies. –– This is a non-corrosive adhesive/sealant –– Silicone rubber formulation cures at room temperature EDMO# 3145/3OZ/C 3145/3OZ/G

72

MFR# DC1610431 DC3138313

QTY 3 oz 3 oz

K-SUN CORPORATION The Epson LabelWorks PX LW-PX900 label printer sets the standard for industrial label printers, with high-resolution printing capabilities for printing die-cut and fixed-length labels, heat-shrink tube, and bar codes. The LW-PX900 prints 360 dpi at print speeds up to 35 mm/sec and is capable of printing on die-cut square, circle, and oval supplies. Convenience-enhancing features like the included removable magnets that allow the printer to be secured to metal surfaces, time-saving hot keys, and the “Drop-Stop” and “Pick and Print” functionalities add to the LW-PX900’s versatility. –– High-speed, 360 dpi print output capabilities produce crisp, detailed labels, bar codes, and wire identification faster and at higher resolution than other printer models –– Prints at speeds up to 35 mm / sec –– Can print on shrink tube up to 21 mm (7/8-inch) wide as well as on die-cut square, circle, or oval supplies –– Provides a 4 mm standard lead margin and the ability to reduce tape waste down to 1 mm –– Front loading design for fast tape replacement –– Comes with magnet attachments that make it easier to use in the field or in work areas where space is limited –– Equipped with industry specific hot keys that streamline and simplify template section from among six different styles and applications for wire wrap, patch panels, and punch blocks –– “Drop-stop” feature stops printing and holds the label until it is removed by the user –– “Pick and Print” programming directs the printer to pause printing and cutting subsequent labels when the “Drop-Stop” feature is engaged –– Provides options for auto-cut and half-cut while a “Mixed Length” option allows the user to quickly select varying label lengths for print –– Includes eight bar-code formats including 2D QR codes, 1000+ symbols, and multiple design effects –– Auto alphanumeric sequencing, repeat and reversed color printing provide added options for label and heat-shrink tube creation –– Printing information can be uploaded and stored into the printer using the included software and USB cable included with some versions –– ENERGY STAR® certified

LW-PX900 Includes printer, AC adapter, guide, and 212BWPX labeling tape

LW-PX900PC Includes printer, AC adapter, USB cable, label editor professional software and manual on CD-ROM guide, and 212BWPX labeling tape.

COLOR clear gray

1.800.235.3300 | edmo.com

LW-PX900PC Kit

EDMO DISTRIBUTORS

Wire, Cable & Accessories

Label & Shrink Tube Printers

LW-PX900PCD

LWPX900PCD Deluxe Kit EDMO#

MFR#

DESCRIPTION

LW-PX900 LW-PX900 LW-PX900 with adapter, guide, and tape LW-PX900PC LW-PX900PC LW-PX900 Kit LW-PX900PCD LW-PX900PCD LW-PX900 Deluxe Kit

PRINTER ACCESSORIES LWPX900AD LWPX9MAG LWPXLION

LWPX900AD LWPX9MAG LWPXLION

LW-PX900 replacement adapter LW-PX900 magnet attachment lithium-ion battery for LW-PX900

209FBBPX

209FBBPX

209FBPPX

209FBPPX

212FBBPX

212FBBPX

212FBPPX

212FBPPX

224SLPX

224SLPX

236HCPX

236HCPX

iron on fabric tape: black on blue, 3/8 × 16 ft 4 in, 9MM; for LW-PX900 and older models iron on fabric tape: black on pink, 3/8 × 16 ft 4 in, 9MM; for LW-PX900 and older models iron on fabric tape: black on blue, 1/2 × 16 ft 4 in, 12MM; for LW-PX900 and older models iron on fabric tape: black on pink, 1/2 × 16 ft 4 in, 12MM; for LW-PX900 and older models self laminating overwrap label tape: black on white, 1 × 26 ft, 24MM (1/4 in white, 3/4 in clear; for LW-PX900 and older models cleaning cartridge: 1 1/2 × 13 ft, 36MM, 100 uses

CARTRIDGES

LABEL SHOP 2012XLST MACHINE KIT K-SUN CORPORATION

EDMO# 2012XLST MFR# 2012XLST The Label Shop Machine Kit includes heat shrink tubing, wire wrap, and a professional label printer all in one. The printer is equipped with a QWERTY style keyboard, an LCD display, and is capable of printing on polyolefin heat shrink tube, polyester wire and cable wrap materials, and industrial polyester adhesive-backed tapes. The printer has an industrial symbols library, 14 fonts, 6-bar code formats, automatic power off, 8-lines of text or numbers, and memory backup. The printer’s incorporated PeelGuard™ Label Trimmer rounds label corners on-demand for greater peeling protection and more professional looking labels. –– Print quality: 180 dpi thermal transfer imaging –– Runs on 6 AAA batteries –– Large LCD screen for easier text and number entry and editing –– Kit includes: 2 tapes, 6 AA batteries, owner’s manual, tape cutter, AC adapter, and a case

EPSON LABELWORKS PX800 DESKTOP LABEL PRINTER

LABEL SHOP 2012XLST-PC KIT

K-SUN CORPORATION

EDMO# 2012XLSTPC MFR# 2012XLST-PC The 2012XLSTPC kit has all of the features of the 2012XLST but also includes MaxiLabel® PRO Software, a quick start guide, and a USB cable. The MaxiLabel® PRO software, version 2.0, adds several capabilities to the system including the ability to import symbols and graphics, date and time stamp functions, split image printing for big labels, templates, frames, alpha-numeric sequencing, and Microsoft Excel files for more labeling applications. (Printer also includes the PeelGuard label trimmer option.) –– Print quality: 180 dpi thermal transfer imaging –– Runs on 6 AAA batteries –– Large LCD screen for easier text and number entry and editing –– Kit includes: 3 tapes, 6 AA batteries, owners manual, tape cutter, AC adapter, MaxiLabel® PRO Software, quick start guide, and USB cable.

EDMO# LW-PX800 MFR# LW-PX800 The Epson LabelWorks PX800 is a compact desktop label printer that provides fast print speeds and the ability to print on 163 materials including magnetic tape, heat shrink tube, glow-in-the-dark material, and industrial adhesive labels up to 1.5 inches wide. This little printer takes up minimal desktop space and comes equipped with hundreds of templates for commonly used labels and signs and thousands of symbols; it also provides capabilities for storing commonly used bar codes or creating 2D QR codes. For users creating large batches of labels, the PX800 can streamline the process by importing preprepared data and tables from Excel. To add that extra professional touch, users can even import images including logos and other graphics. –– Provides fast print speeds of up to 35 mm/sec with crisp, clear 360-dpi printing resolution and uses economical tape cartridges that yield more labels –– Prints on supplies up to 36 mm (1.5 inches) wide (prints on shrink tube up to 21 mm (7/8 inch) wide) –– Designed with an integrated PeelGuard® trimmer that extends label life by rounding label corners –– 1 mm margin setting reduces wasted tape*

EDMO DISTRIBUTORS

2

–– Equipped with Wi-Fi printing capabilities that can be used with any smart device and Epson iLabel or datacom app—this network connectivity makes it easy for multiple users to share one printer –– Half-cut function allows the user to serialize strips of labels –– Constructed with a compact, top-loading design that saves desktop space (measures 12.3 × 15.1 × 13.8 in) –– ENERGY STAR® certified –– Includes: printer, AC adapter, USB cable, label editor professional software and manual on CD-ROM, guide, and 212BWPX labeling tape *10 mm lead is standard on a single label, or the first label in a batch

Includes printer, AC adapter, lithium-ion battery, USB cable, label editor professional software and manual on CDROM, magnetic attachment, guide, 212BWPX labeling tape, and a black industrial hard case

K-SUN CORPORATION

1.800.235.3300 | edmo.com

73

Wire, Cable & Accessories Label & Shrink Tube Printers

CARTRIDGES FOR K-SUN PRINTERS

K5100 HANDHELD PRINTER

K-SUN CORPORATION

KROY INC

2

SHRINK TUBE CARTRIDGES K-Sun Label shrink tubes use industrial grade polyolefin base materials that have a shrink rate of 50% or more in diameter and 15% or less in length. –– Temperature range 90-270°C –– Compliance standards: UL standard 224 (rated temperature: 125°C, rated voltage: 300V, flame resistance grade VW-1) –– Available in multiple widths. EDMO#

MFR#

COLOR

203STBY DIMENSIONS (IN)

FOR USE WITH: BEE3, BEE3+, 2001XLST, 2012XLST, 2012XLST-PC AND 2010PC 203STBW 203STBY 205STBR 205STBW 205STBY

203STBWS 203STBY 205STBR 205STBWS 205STBYS

black/white black/yellow black/red black/white black/yellow

1/8 × 96 1/8 × 96 3/16 × 96 3/16 × 96 3/16 × 96

FOR USE WITH: BEE3+, 2001XLST, 2010PC, 2012XLST, 2012XLSTPC, GREEN MACHINE, GREEN MACHINE-P 208STBW 210STBW 211STBW 211STBY

208STBWS 210STBWS 211STBWS 211STBYS

black/white black/white black/white black/yellow

1/4 × 96 3/8 × 96 1/2 × 96 1/2 × 96

LABELING TAPE CARTRIDGES K-Sun Label tapes are made of a durable, all-weather polyester base with an industrial grade acrylic adhesive that makes them flexible enough to be mounted on curved surfaces. The tapes comply with ANSI/TIA/ EIA-606A standards and have a 5-7 year outdoor life with the ability to withstand extreme heat and cold temperatures. Each cartridge contains 26 feet of tape. Available in multiple widths.

EDMO# 2561000

MFR#

COLOR

206BC 206BW 206WB 209BYs 212BY

black/clear black/white white/black black/yellow black/yellow

DESCRIPTION K5100 handheld printer

2449300 2563900

2449300 2563900

NiCD batteries for K5100, 6 each carrying case for K5100

DIMENSIONS

FOR USE WITH: 2001XL, 2001XLB, 2001XLST, 2010PC, 2011XLB, 2011XLB-PC, 2012XLST, 2012XLST-PC, BEE3, BEE3+, GREEN MACHINE, GREEN MACHINE-PC 206BC 206BW 206WB 209BY 212BY

MFR# 2561000

ACCESSORIES 206BW

EDMO#

The K5100 handheld printer prints shrink tubing, self-laminating cable markers, and industrial tapes. Because of its small size it’s highly portable, making it ideal for applications away from the bench and in the field. It’s equipped with rechargeable batteries, has PC connectivity, and flash upgradeable firmware. Text is displayed on the easy-to-read, two-line, 16-character LCD screen and prints at 300 dpi. –– Thermal transfer print technology –– Prints at 6-72 pint at 300 dpi resolution –– Auto sizing text feature –– Two-line × 16 character LCD display –– Downloadable and scalable fonts with onboard memory to store files and fonts –– Alpha-numeric sequencing (A-Z, 1-999) –– Repeat function allows up to 999 copies –– 10 resident bar code symbologies –– Built-in cutter and feed control eliminates waste –– Print styles includes frame, bold, italic, underline, and mirror –– Rotate feature for landscape or portrait mode –– Vertical and horizontal print formats –– Print speeds up to 2 inches per second –– Real time clock with time/date stamping ability –– Audible key clicks and error messages –– Built-in cutter and feed control eliminates waste –– Internal battery charger –– KLDS software and Windows printer drivers –– Internal battery charger –– Uses the same cartridges, labels, and shrink tubes as the K2000PC, K3000-PC, K2000, K2500, K5100, and K4100 –– Includes an AC adapter, power cord, serial cable, and manual

1/4 in × 26 ft 1/4 in × 26 ft 1/4 in × 26 ft 3/8 × 26 ft 1/2 × 26 ft

CARTRIDGES FOR KROY PRINTERS KROY INC

INDUSTRIAL POLYESTER LABEL CARTRIDGE 1-inch wide clear tape for permanent black printing. Resistant to UV light and chemicals. No set label length. –– 40 ft length

2438643 EDMO#

MFR#

COLOR

WIDTH (IN)

FOR USE WITH: K2500, K3000PC, K3100PC, K4100, K5100 2438601

74

1.800.235.3300 | edmo.com

2438601

black/clear

1

EDMO DISTRIBUTORS

Wire, Cable & Accessories

Label & Shrink Tube Printers

EDMO#

MFR# 2438602 2438616 2438620 2438643 2438701 2438716 2438743

COLOR

WIDTH (IN)

white/clear black/white white/black black/yellow black/clear black/white black/yellow

EDMO# 2404201 2404202 2404210 2404211 2404220 2404221 2464416

FOR USE WITH: K2500, K3000PC, K4100 AND K5100 2487901 2487916 2487920 2487943

2487901 2487916 2487920 2487943

black/clear black/white white/black black/yellow

2470001 2470002 2470011 2470012 2470021 2470022 2470031 2470032 2470041 2470042

WIRE WRAP LABEL CARTRIDGES

EDMO#

MFR#

QTY

2556701 2556702 2556703 2556704 2556705 2556707 2556708

80 160 110 250 60 175 180

2556701

DIMENSIONS (IN)/ PRINTABLE AREA (IN) 4×1/1×1 1.25 × 1 / 1 × 0.5 2.5 × 1 / 1 × 0.75 0.75 × 1 / 1 × 0.375 6 × 1 / 1. × 1.50 1 × 1 / 1 × 0.375 0.5 × 1 / 1 × 0.25

SHRINK TUBE CARTRIDGES Shrink tube cartridges for Kroy TM-600 and TM-650 printers constructed with premium polyolefin tubing and black thermal transfer resin ribbon. –– Ultra-thin, cadmium-free wall with a 3:1 shrink ratio –– Temperature range for 240-series: 2404221 –– Provides an operating temperature range of 67°to 275°F (-55°C to 135°C) for short amounts of time –– Temperature range for 247-series: –– Operating temperature range of -67°to 275°F (-55°C to 135°C) with up to 347°F for short durations and a low recovery temperature of 194°F –– All tubing is flame retardant and resistant to high temperatures, chemicals, water, and abrasion –– Available in multiple widths (specified below) –– Meets Military Specification MIL-DTL-23053/5C Class 1 and 3, UL224VW-1 rating –– Ideal for wire marking and electrical insulation of light wire harness assemblies

EDMO DISTRIBUTORS

DIMENSIONS (IN)

2404201 2404202 2404210 2404211 2404220 2404221 2464416

black/white black/yellow black/white black/yellow black/white black/yellow black/white

0.125 × 100 0.125 × 100 0.188 × 100 0.188 × 100 0.250 × 100 0.250 × 100 0.500 × 50

2470001 2470002 2470011 2470012 2470021 2470022 2470031 2470032 2470041 2470042

black/white black/yellow black/white black/yellow black/white black/yellow black/white black/yellow black/white black/yellow

0.125 × 110 0.125 × 110 0.188 × 110 0.188 × 110 0.25 × 110 0.25 × 110 0.38 × 110 0.38 × 110 0.5 × 110 0.5 × 110

SHRINK TUBE REEL

FOR USE WITH: K2500, K3000PC, K4100, K5100 2556701 2556702 2556703 2556704 2556705 2556707 2556708

COLOR

FOR USE WITH: K2500, K3000PC, K4100, K5100

0.5 0.5 0.5 0.5

Self-laminating wire wrap cartridges for use with Kroy K-series printers with an aggressive permanent adhesive that is guaranteed not to flag or fall off and sticks to substrates including wire insulation materials, plastics, and metals. 4-mil translucent vinyl with a colored printable area on each label. Resistant to UV, temperature extremes, chemicals, water, and abrasion.

MFR#

FOR USE WITH: TM-600 AND TM-650

1 1 1 1 0.8 0.8 0.8

2

2438602 2438616 2438620 2438643 2438701 2438716 2438743

Continuous 100-foot reels of shrink tubing that meet the MIL-I-23053/5 class 1 and 3, MIL-I R 46846 type V and UL-224VW-I rating. This ultra-thin wall, cadmium-free polyolefin tubing has a low recovery temperature of 194°F and a shrink ratio of 3:1. Resistant to flames, high temperatures, chemicals, water, and abrasion. –– White –– 100 ft length EDMO# WT31-0442 WT31-0642 WT31-0942 WT31-1242 WT31-2542

MFR#

WT31-0642

WIDTH (IN)

98-WT31-0442 98-WT31-0642 98-WT310942 WT31-1242 WT31-2542

0.188 0.25 0.375 0.5 1

LAMINATED POLYESTER TAPE CARTRIDGES 12.7 MM General purpose tape cartridges for the Kroy 240-series label printers. Consists of 2.0-mil polyester with thermal transfer ribbon and over-laminating film. Chemicaland water-resistant.

2227536 EDMO#

MFR#

COLOR

DIMENSIONS

FOR USE WITH: 240SE OR 244RS 2227516 2227520 2227536 2227543 2357501

2227516 2227520 2227543 2357501

black/white white/black white/red black/yellow black/clear

1.800.235.3300 | edmo.com

1/2 in × 50 ft 1/2 in × 50 ft 1/2 in × 50 ft 1/2 in × 50 ft 1/2 in × 50 ft

75

Wire, Cable & Accessories Mu-Metal

MU-METAL

BAP SERIES

2

MU-METAL MAGNETIC SHIELDING EDMO# AD-MU80 MFR# AD-MU-80 AD-MU alloy provides RF shielding when placed around electronic equipment prior to installation. AD-MU alloy exhibits relatively stable permeability characteristics after final anneal and experiences no excessive loss of permeability from shock and when properly used, AD-MU will not saturate. Sold by the inch with peel-andstick adhesive backing, 4 in × 4 mm.

The Spring-Fast® BAP Flexi Wire Protection Grommet Series provides greater gripping strength than the “T” and “BT” series grommet edging for severe shock and vibration environments with 4-axis flexibility.

white

black EDMO#

MFR#

SHEET THICKNESS (IN/MM)

25 FT REEL - GRAY BAP025R402 BAP125R402 BAP200R702 BAP225R402

BAP0-0025-ER0402 BAP125R402 BAP2-0100-ER0702 BAP2-0025ER0402

0.020-0.030 / 0.5-0.8 0.029-0.045 / 0.7-1.1 0.044-0.056 / 1.1-1.4 0.044-0.056 / 1.1-1.4

25 FT REEL - BLACK BAP225R201 BAP425R201

GROM STRIPS SPRING-FAST WIRE PROTECTION COMPOSITE GROMMET STRIPS DEVICE TECHNOLOGIES, INC. Easy to snap on in seconds, Spring-Fast® wire protection grommet edges protect wire and cable from abrasion while significantly reducing install costs by eliminating the need for heat or toxic adhesives (and the application tools and supplies that goes with them). In addition, the Spring-Fast® series doesn’t require as much cleanup nor Haz-Mat disposal and the delays associated with adhesive cure times. These grommet strips provide two- and four-axis flexibility that makes them easy to apply in single- and multi-plane applications. –– No adhesives are needed for installation, which eliminates the need for toxic adhesives, application media, cleanup and cure time, heat application, and custom molding costs –– High corrosion resistance –– UL94 V-0 flammability rating –– Superior dielectric strength –– High shock and vibration resistance to rams G 41.7 –– Multi-axis flexibility for rounded inside and outside corners –– Continuous edge protection on flanged holes, 1/8-inch or greater inside radius and 1/4-inch or greater outside radius. Continuous heat up to 185°F (85°C), low temperature to -40°F (-40°C)

BT SERIES

76

BAP3-0100

BAP3-0100-ER0201

0.055-0.069 / 1.4-1.7

12.75 IN (10 CUT PIECES) - GRAY BAP085C402 BAP185C402 BAP285C402 BAP385C402 BAP485C402 BAP585C402 BAP685C402

04-BAP0-OO85EC0402 BAP185C402 04-BAP2-0085EC0402 04-BAP3-0085EC0402 BAP4-0085-EC0402 BAP5-0085-EC0402 BAP6-0085-EC0402

0.020-0.030 / 0.5-0.8 0.029-0.045 / 0.7-1.1 0.044-0.056 / 1.1-1.4 0.055-0.069 / 1.4-1.7 0.069-0.090 / 1.7-2.3 0.089-0.114 / 2.3-2.9 0.113-0.13 / 2.9-3.3

ACCESSORIES 840R

840R

Spring-Fast® Roll-Fast Roller (install tool) with 1/2-inch outside groove diameter

GROMMET EDGING NASM22529/2 SERIES The NASM22529/2 series have an abrasion-resistant subsurface and a polymer cushion that protect wires and cable from abrasion. Military specification, FAA approved per NASM 22529/2 and national stock numbers per Federal Supply Code 5352. MFR#

SHEET THICKNESS (IN/MM)

25 FT REEL - GREEN/GRAY M/2-1R-25 M/2-2R-25 M/2-3R-25 M/2-4R-25 M/2-6R-25

04-M22529/2-1R-25 04-M22529/2-2R-25 04-M22529/2-3R-25 04-M22529/2-4R-25 04-M22529/2-6R-25

0.025 / 0.6 0.036 / 0.9 0.059 / 1.5 0.70 / 1.8 0.105 / 2.7

10 CUT PIECES, 12.75 IN LENGTH - GREEN/GRAY

MFR#

SHEET THICKNESS (IN/MM)

25-FOOT REEL - BLACK BT1-0025BT2025R201

0.044-0.056 / 1.1-1.4 0.069-0.090 / 1.7-2.3

100 FT REEL - BLACK

EDMO#

The Spring-Fast® BT series includes the “T” series abrasion-resistant subsurface and a polymer cushion that provides a soft surface edge grommet on which wires and cable are protected. EDMO#

BAP2-0025-ER0201 BAP4-0025-ER0201

BT1-0025-ER0201 BT2-0025-ER0201

0.029-0.045 / 0.5-0.8 0.044-0.056 / 1.1-1.4

1.800.235.3300 | edmo.com

M/2-1C-85 M/2-2C-85 M/2-4C-85 M/2-5C-85 M/2-6C-85 M/2-7C-54

04-M22529/2-1C-85 04-M22529/2-2C-85 04-M22529/2-4C-85 04-M22529/2-5C-85 04-M22529/2-6C-85 04-M22529/2-7C-54

0.025 / 0.6 0.036 / 0.90 0.070 / 1.80 0.090 / 2.30 0.105 / 2.70 0.178 / 4.50

100 FT REEL - GREEN/GRAY CUSHIONED M/2-5R-100 M/2-6R-100 M/2-7R-100

M22529/2-5R-100 M22529/2-6R-100 04-M22529/2-7R-100

0.111 / 2.8 0.134 / 3.4 0.198 / 5.0

EDMO DISTRIBUTORS

Wire, Cable & Accessories Grommets

GROMSTRIPS

EDMO#

EDMO#

MFR#

SHEET THICKNESS (IN/MM)

NYLON MIL-SPEC 21266 GSNCM-1 GSNCM-2 GSNCM-3 GSNCM-4 GSNCM-5

GSNCM-1 NATURAL GSNCM-2 NATURAL GSNCM-3 NATURAL GSNCM-4 NATURAL GSNCM-5 NATURAL

0.015-0.052 / 0.38-1.32 0.052-0.085 / 1.32-2.16 0.085-0.128 / 2.16-3.25 0.128-0.192 / 3.25-4.88 0.255-0.318 / 6.48-8.08

SERRATED POLYETHYLENE GSPC-1 GSPC-2 GSPC-3 GSPC-4 GSPC-5

GSPC-1 NATURAL GSPC-2 NATURAL GSPC-3 GSPC-4 GSPC-5

to 0.036 / to 0.91 0.037-0.071 / 0.94-1.80 0.106-0.164 / 2.69-4.17 0.165-0.187 / 4.19-4.75 0.188-0.250 / 4.78-6.35

GROMMETS

MS35489-20 MS35489-21 MS35489-22 MS35489-23 MS35489-24 MS35489-33

MFR#

DIMENSIONS (IN)

MS35489-20 MS35489-21 MS35489-22 MS35489-23 MS35489-24 MS35489-33

0.750 / 1.062 0.750 / 1.438 0.875 / 1.250 1.00 / 1.375 1.00 / 1.875 0.188 / --

2

Gromstrips consisting of a continuous length of extruded U-channel for use as a protective covering on sharp edges. There are two material options, polyethylene for general use or nylon when more abrasion- and heat resistant material is required. These gromstrips can be cut to any length and a serrated version of the polyethylene gromstrip is ideal for use in acute angles or similar, difficult insulations. –– Polyethylene option is for general application –– Nylon option is ideal when abrasion-resistant material is needed; it has a higher operating temperature and better dielectric constant than polyethylene

VINYL GROMMETS These vinyl grommets are flexible and oil resistant. The have a high dielectric strength and are both durable and long-lasting. –– Hardness udometer 60+/-5 shore A –– Tensile strength: 1400 psi –– Abrasive resistance: excellent –– Effect of sunlight: slight to none –– Hydro carbon solvent resistance: good –– Weak acid resistance: no effect –– Burning rate: self extinguishing EDMO# GV-1/4 GV-5/16 GV-3/8 GV-7/16 GV-1/2 GV-5/8 GV-21/32 GV-7/8 GV-1 GV-1 3/8

MFR# GV-1/4 GV-5/16 GV-3/8 GV-7/16 GV-1/2 GV-5/8 GV-21/32 GV-7/8 GV-1 GV-1 3/8

GV-7/16

DIA. (IN) 0.125 0.188 0.250 0.313 0.375 0.500 0.391 0.625 0.688 1.00

BULKHEAD GROMMETS/MIL-SPEC Designed for electrical insulation, sealing, noise control, and vibration isolation, these bulkhead grommets are constructed with synthetic rubber and satisfy mil-spec MS25489. MS35489-23 EDMO#

MFR#

DIMENSIONS (IN) HOLE / GROOVE

MS35489-2 MS35489-3 MS35489-4 MS35489-5 MS35489-6 MS35489-7 MS35489-8 MS35489-9 MS35489-10 MS35489-11 MS35489-13 MS35489-14 MS35489-16 MS35489-17 MS35489-18 MS35489-19

MS35489-2 MS35489-3 MS35489-4 MS35489-5 MS35489-6 MS35489-7 MS35489-8 MS35489-9 MS35489-10 MS35489-11 MS35489-13 MS35489-14 MS35489-16 MS35489-17 MS35489-18 MS35489-19

EDMO DISTRIBUTORS

0.125 / 0.562 0.125 / 1.00 0.188 / 0.312 0.188 / 0.625 0.240 /0.438 0.250 / 0.750 0.250 / 1.00 0.312 / 0.562 0.312 / 0.750 0.375 / 0.625 0.438 / 0.688 0.500 / 0.812 0.562 / 0.812 0.625 / 0.875 0.625 / 1.250 0.688 / 1.00

1.800.235.3300 | edmo.com

77

Pitot Static Accessories

Pitot Static Tubing & Fittings............................................................................. 82

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

79

Pitot Static Accessories Pitot Static Tubing & Fittings

PITOT STATIC TUBING & FITTINGS 3

NYLO-SEAL TUBING Nylo-Seal tubing is best used for instrumentation lines, lubrication and process piping systems, and fuel, oil, and refrigerant lines within a temperature range from -60°F to +225°F. This tubing is constructed with Nylon 11, which is not affected by solvents, alkalis, dilute mineral acids, or petroleum products and it also resists sunlight and attacks by vermin. Additionally, this tubing is easy to work with and does not require moisture to enhance its flexibility. –– Withstands a temperature range from -60°F to +225°F –– Tensile strength: 8,500 psi –– Elongation: 310% EDMO# 44-NSR 66-NSR 88-NSR

MFR# 44-NSR 66-NSR 88NSR-BK

COLOR natural black black

TUBE OD (IN) 1/4 3/8 1/2

POLY-FLO TUBE CUTTER

EDMO# 307-FP MFR# 307-SP Compact, spring-loaded shear for cutting plastic tube, Hytron® thermoplastic hose, and rubber hose without wire reinforcing (1/16 – 1/2 in outside diameter hose or tubing). Equipped with a replaceable, hardened steel blade. –– Weight: 1 oz –– Length: 2-7/8 in

NYLON TUBE FITTINGS These Nylo-Seal Flareless Tube Fittings require no wrenches, flaring tools, benders or other tools for installation. The nut revolves around the sleeve and is tightened so as to prevent twisting and weakening of the plastic tubing. Can be used with plastic or soft metal tubing. Molded nylon bodies and nuts with an acetal copolymer sleeve.

PSI 2,500 2,500 2,000

259N04

259P04

261N04

262N04

264N04

265N04

266N04X04

268N04X02

269N04X02

270N04X02

271N04X02

272N04X02

282N04

POLY-FLO TUBING & CUTTER POLY-FLOW TUBING Poly-Flo tubing can be used in pneumatic lines, instrumentation systems, and water piping (as well as limited food service— natural colored tubing only). Constructed with low-density polyethylene, Poly-Flo tubing has dimensional stability, a strong, uniform structure, and high resistance to heat and stress, sunlight, most solvents and chemicals, and attacks by vermin. –– Withstands a temperature range from -100°F to +175°F. –– Tensile strength: 2,300 PSI –– Elongation: 670% EDMO#

MFR#

COLOR

PSI

WEIGHT (LB)

TUBE OD: 1/4 IN / MIN. BEND RADIUS: 1 IN 2800004 44PB 44PN 44PF 44PO

44P-BK 44PB 44P-N FRPE4 44P-

black blue natural black orange

400 400 400 400 400

1.10 1.10 1.10 1.10 1.10

TUBE OD: 5/6 IN / MIN. BEND RADIUS: 1-1/8 IN 55PN

55P-N

natural

600

1.9

TUBE OD: 3/8 IN / MIN. BEND RADIUS: 1-1/4 IN 66PB 66PN 66PR 66PY

80

66PB 66P-N 66P-R 66P-Y

blue natural red yellow

600 600 600 600

2.5 2.5 2.5 2.5

1.800.235.3300 | edmo.com

EDMO# 259N04 259N06 259P04 259P06 261N04 261N06 262N04 262N06 264N04 264N06 265N04 266N04X02

MFR# 259N04 259N06 259P04 259P-06 261N04 261N06 262N04 262N06 264N04 264N06 265N04 266N04X02

TYPE

TUBE OD (IN)

insert stabilizer insert stabilizer plug plug nut/sleeve assembly nut/sleeve assembly inline inline union tee union tee union elbow female connector

1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 1/4 1/4

LENGTH (IN) 0.375 0.406 0.5 0.531 0.468 0.578 1.812 2.0 1.156 1.406 1.156 1.343

EDMO DISTRIBUTORS

Pitot Static Accessories

Pitot Static Tubing& Fittings

EDMO#

MFR# 266N04X04 268N04X02 268N04X04 269N04X02 269N04X04 270N04X02 270N06X04 271N04X02 271N06X04 272N04X02 282N04

TUBE OD (IN)

female connector male connector male connector male elbow male elbow female elbow female elbow male run tee male run tee male branch tee bulkhead union

1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 1/4 1/4

LENGTH (IN) 1.531 1.406 1.593 1.156 1.156 1.156 1.406 1.156 1.406 1.156 2.312

NYLON INSERT FITTINGS Multi-barb, nylon insert fittings are best used in low-pressure, non-critical applications where hose clamping is not desired. The multiple bars increase the overall surface area contacting the tubing, thus preventing leaks in low pressures with mild solutions. These insert settings are easy to assemble into joining systems for soft tubings like soft rubber hose and polyurethane. –– Used with 1/4-in hose or tubing. Constructed with nylon for use with water or hydrocarbons

0701-153

0706-015

0711-015

0711-153

0716-015

0716-153

3

266N04X04 268N04X02 268N04X04 269N04X02 269N04X04 270N04X02 270N06X04 271N04X02 271N06X04 272N04X02 282N04

TYPE

BRASS FITTINGS Poly-Flo Flareless Tube Fittings have a plastic sleeve that snaps onto the nut without the need for wrenches or other tools when installed with tubing. Constructed with brass elbows, tees, connectors, unions, and nuts with acetal copolymer sleeves.

261P04

262P04

264P06

0742-006

266P04X02

268P04X02

271P04X02

272P04X02

EDMO# 260P-04 260P-06 261P04 261P06 262P04 264P04 264P06 266P04X02 268P04X02 269P04X02 269P06X02 271P04X02 272P04X02

MFR# 260P-04 260P-06 261P04 261P06 262P04 264P04 264P06 266P04X02 268P04X02 269P04X02 269P06X02 271P04X02 272P04X02

TYPE plastic sleeve for 261P04 plastic sleeve for 261P06 nut & plastic sleeve nut & plastic sleeve union/inline connector union tee union tee female connector male connector male elbow male elbow male run tee male branch tee

EDMO DISTRIBUTORS

269P04X02

TUBE OD (IN) 1/4 3/8 1/4 3/8 1/4 3/8 3/8 1/4 1/4 1/4 3/8 1/4 1/4

LENGTH (IN) 0.325 0.356 0.343 0.375 1.125 1.406 0.875 0.968 1.031 0.843 0.875 0.843 0.843

EDMO# 0701-153 0706-015 0711-015 0711-153 0716-015 0716-153 0742-006

MFR# 701.153 706.015 711.015 0711-153 716.015 716.153 0742-006

STYLE inline inline elbow elbow tee tee cross

HOSE SIZE 1/8 × 1/4 (MIPT × hose size) 1/4 × 1/4 (hose × hose) 1/4 × 1/4 (hose × hose) 1/8 × 1/4 (MIPT × hose size) 1/4 × 1/4 × 1/4 (hose × hose × hose) 1/8 × 1/4 × 1/4 (MIPT × hose size)

NORPRENE TUBING

EDMO# 0023071 MFR# 23.071 Norprene® Chemical Tubing is heat-sealable tubing that is resistant to oxidizing agents, acids, and alkalies and it doesn’t weaken or crack, even after years of prolonged atmospheric ozone exposure. Additionally, it resists flex-fatigue in peristaltic pumps. This tubing can be used in temperatures between -60°F to 275°F. Use with insert type fittings.

ID / OD: 1/4 in / 3/8 in wall (in): 1/16 working pressure at 70°F: 10 psi Resistant to: ammonia, bleach, brake fluid, bromine, chlorine, essential oils, ethylene glycol, formaldehyde, hydrochloric acid, hydrogen peroxide, iodine, methanol, nitric acid (10%), plating solutions, soap solutions, sodium hydroxide (to medium concentrations) and sulfuric acid (to medium concentrations)

1.800.235.3300 | edmo.com

81

Avionics & Instrument Mounting

Cover Plates, Adapter Plates & Clamps............................................................ 84 Mounting Brackets............................................................................................ 86 Mounting Systems............................................................................................ 87 Hardware........................................................................................................... 89 Cooling Fans..................................................................................................... 95

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

83

Avionics & Instrument Mounting Cover Plates, Adapter Plates & Clamps

COVER PLATES, ADAPTER PLATES & CLAMPS

ADAPTER PLATES/BLACK

INSTRUMENT HOLE COVER PLATES

The reducer plates work in sets of two to allow a flush mount when reducing hole size to accommodate a new instrument. Made of .080in thick heat-treated aluminum with a black anodized finish. The ATI hole mounts aid in easy installation of equipment requiring an ATI hole. Simply cut a non-precision hole a little larger than the hole needed, then mount the ATI hole mount to the instrument panel. Available in two of the most popular sizes. Black finish

4

Cover plates come in four sizes: 2.25-in, 3.125-in, 3 ATI, and .5 ATI. Finishes include black aluminum with wrinkle finish, unfinished aluminum, and black plastic (fire retardant material).

3.125-in raw aluminum ALT or VSI gauge version EDMO#

MFR#

3 ATI black powder coated aluminum

RP-2

RP-AT12

RP-AT13

RP-SP

HM-1

2.25-in black wrinkle finish

FINISH

2.25-IN COVER PLATES CP-1AB CP-1AR CP-1FR

RP-1

FAP 05-1AB black aluminum with a wrinkle finish FAP 05-1ANP unfinished aluminum FAP 05-1 fire retardant black plastic (per FAR 24.853)

3.125-IN COVER PLATES CP-2AB CP-2AR CP-2FR CP-6FR CP-6AR

FAP 05-2AB FAP 05-2ANP FAP 05-2FR FAP 05-4 FAP 05-4 ANP

black aluminum with a wrinkle finish unfinished aluminum fire retardant black plastic (per FAR 24.853) for altimeters or VSI; fire retardant black plastic for altimeters or VSI; unfinished aluminum

3 ATI COVER PLATES ATI-1AB ATI-1AR ATI-1FR

FAP 05-3AB FAP05-3ANP FAP 05-3FR

black, powder coated aluminum unfinished aluminum surface black, fire retardant plastic

.5 ATI COVER PLATES CP-7FR

FAP05-5FR

black, fire retardant plastic

HM-2 EDMO# RP-1 RP-2 RP-ATI2 RP-ATI3 HM-1 HM-2

MFR# FAP 04-1 FAP 04-2 FAP 04-4 FAP 04-3 HM-1 HM-2

FITS

DIMENSIONS

reducer plate: 3-1/8 to 2-1/4 in reducer plate: AN gyro to 3-1/8 in reducer plate: 3 ATI to 2-1/4 in reducer plate: 3 ATI to 3-1/8 in 3 ATI hole mount 1/2 ATI hole mount

3.5 × 3.5 in 4.63 × 4.63 in 3.44 × 3.44 in 3.44 × 3.44 in 3-3/16 × 5-3/16 in 3-3/16 × 5-3/16 in

ACCESSORIES RP-SP

FAP 04-5

flush spacer for RP-1

RADIO COVER PLATES ADAPTER PLATES & HOLE COVERS

After removing unneeded avionics from the panel, these radio cover plates clip into the unused hole left behind—creating a finished, clean look. They are coated with a black crinkle finish to blend in with existing equipment. Although they are available in three sizes, they can easily be cut to odd sizes. EDMO# CP-3FR CP-4FR CP-5FR

84

MFR# CP-3FR CP-4FR CP-5FR

COLOR black black black

Hole covers and adapter plates CNC machined with 0.125-inch aircraft-grade 5052 billet aluminum. Face is raised 0.075-inch to create a flush look when installed in the panel. Adapters come with 6-32 nut inserts installed.

SIZE 6-7/16 × 2 in 6-7/16 × 3 in 6-7/16 × 5 in

1.800.235.3300 | edmo.com

MK-620

MK-621

MK-622

MK-623

MK-624

MK-630

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Cover Plates, Adapter Plates & Clamps AVIONICS CLAMPS & MOORING PLATES MSP clamps eliminate the need for panel removal when repairing or replacing an instrument like an altimeter or artificial horizon. These patented chem film and anodized finished clamps are rust proof for up to 25 years; made from lightweight, non-conductive aluminum, they make retrofits simpler and faster as well as making the instrument more secure in the panel. Boeing certified. MK-632

MK-633

MK-640

MK-641

MK-642

4

MK-631

EDMO#

MFR#

MK-620 MK-621 MK-622

MK-620 MK-621 MK-622

MK-623 MK-624 MK-630 MK-631 MK-632 MK-633 MK-640 MK-641 MK-642

MK-623 MK-624 MK-630 MK-631 MK-632 MK-633 MK-640 MK-641 MK-642

MK-10

64311B

64640B

64662B-107

64377B-101

MS28042-1A

ADAPTER/COVER USE plugs standard 3-1/8 in hole plugs standard 3-1/8 in hole plugs ALT/VSI kick out only, 3-1/8-in standard hole remains adapts 3-1/8 hole to 2-1/4 in hole plugs 2-1/4 in plugs KI 525 hole adapts KI 525 hole to std. 2-1/4 in adapts KI 525 hole to std. 3-1/8 in adapts KI 525 hole to 3 ATI hole plugs standard 3 ATI hole adapts 3 ATI hole to 2-1/4 in hole adapts 3 ATI hole to 3-1/8 in hole

ACCESSORIES MK-KI-525

64321B

MK-KI 525 mounting kit for KI525—includes: 1 mounting ring and 4 black brass screws with nylon washers MK-10 ATI cover Garmin GDU 620 mounting kit—includes: two 0.125-inch mounting wings, 6 black brass screws, nylon washers, 4 installation pins, and instructions

68010-6 EDMO#

MFR#

DIMENSIONS

FINISH

ATI-R RECTANGULAR 64321B

64321B

3 × 1.5 × 1 in (ATI-R)

anodized

64419B

3 × 1.5 × 1 in (ARINC)

anodized

64311B 64640B 64435B-103 64662B-107

3 × 3 × 2 in 3 × 3 × 2 in 3 × 3 × 4 in 3 × 3 × 4 in

anodized chem film anodized chem film

64377B-101

4 × 4 × 4 in

anodized

MS28042-1A MS28042-3A

2 × 1 in 1.5 × 1

anodized anodized

3 × 3 × 0.25 in

anodized

ARINC RECTANGULAR 64419B

ATI-S SQUARE 64311B 64640B 64435B-103 64662B-107

ARINC SQUARE 64377B-101

ROUND

INSTRUMENT MOUNTING NUTS (GRASSHOPPER NUTS)

MS28042-1A MS28042-3A

Mount instruments with ease, using these instrument mounting nuts. Cages composed of phosphor bronze, nuts of half-hard brass. Finish is cadmium per QQ-P-416, type 1.

68010-6

EDMO#

MFR# MS33737-11C MS33737-12C MS33737-13C MS33737-14C MS33737-15C

THREAD SIZE 6-32 6-32 6-32 6-32 6-32

EDMO DISTRIBUTORS

68010-6

Not finding what you're looking for? 3373713C & 3373715C

3373711C 3373712C 3373713C 3373714C 3373715C

ATIS MOORING PLATE

We have more sizes available online—be sure to visit us at edmo.com or give us a call. It’s likely we have what you need, or we can order it for you. Call today at 1.800.235.3300.

LEG LENGTH (IN) 1/8 3/16 1/4 5/16 3/8

1.800.235.3300 | edmo.com

85

Avionics & Instrument Mounting Mounting Brackets

MOUNTING BRACKETS

CONNECTOR MOUNTING BRACKETS

INSTRUMENT MOUNTING BRACKETS

4

FSU-23 FSIM-01

FSIM-02

FSIM-03

MK-01

MK-02

MK-03

FSIM SERIES PMA-approved instrument mounting nut rings. These lightweight brackets are easy to install with self-wrenching, self-locking press nuts. These brackets eliminate the risk of loose hardware behind the panel. –– retainer material: 6061-T6 aluminum 0.040 thick –– retainer finish: Alodine per MIL-DTL-5541 –– pressnut and mounting screw material: stainless steel –– pressnut finish: cadmium per SAE AMS-QQ-P-416 followed by dry film lube per MIL-PRF-46010 –– mounting screw finish: black oxide EDMO# FSIM-01 FSIM-02 FSIM-03

MFR# FSIM-01 FSIM-02 FSIM-03

SHELL SIZE 3.125/6-32 3.125/6-32 2.250/6-32

–– –– –– ––

fastener brackets FSU series nut ring mounting bracket for flange mount connectors. retainer material: 0.040 +/- 0.003 thick 2024-T3 aluminum alloy retainer finish: Alodine nut: Self-locking nut constructed with cadmium-plated steel followed by a solid dry film lubricant. Meets performance requirements of MIL-N-25027 specification.

EDMO# FSU-6 FSU-8 FSU-10/7 FSU-12 FSU-14/19 FSU-16/27 FSU-18 FSU-20 FSU-22 FSU-23 FSU-24 FSU-25 FSU-28 FSU-36 FSU-37 FSU-40 FSU-48 FSU-61

MFR# FSU-6 FSU-8 FSU-10/7 FSU-12 FSU-14/19 FSU-16/27 FSU-18 FSU-20 FSU-22 FSU-23 FSU-24 FSU-25 FSU-28 FSU-36 FSU-37 FSU-40 FSU-48 FSU-61

SHELL SIZE 6/4-40 8/4-40 7/4-40 12/4-40 14/4-40 16/4-40 18/4-40 20/4-40 22/4-40 23/4-40 24/4-40 25/4-40 28/4-40 36/4-40 37/4-40 40/4-40 48/4-40 61/4-40

MOUNTING KITS These precision-machined kits slide on from the backside of the instrument using the alignment guide pin inserted through a screw hole (they are designed to replace grasshopper nuts). Each kit comes with nylon washers that are less likely to chip the instrument panel and MS35214-32 black brass mounting screws that are long enough to accommodate the thicknesses of light wedges and internally lighted instruments. –– includes black brass mounting screws and nylon washers –– installation alignment guide pin sold separately (see table). Custom-length screws work with or without back lighting rings so that additional screws are unnecessary. EDMO#

86

MFR#

SHELL SIZE

MK-01 MK-02

MK-01 MK-02

3.125-inch nut ring 3.125-inch nut ring/cutout

MK-03

MK-03

2.25-inch nut ring

AP01

AP-01

alignment pin for nut rings

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Mounting Systems

MOUNTING SYSTEMS DZUS RAIL & ACCESSORIES DZUS

EDMO# D5-1-1 D5-1-2 D5-1-3 D5-1-4 D5-1-5 D5-1 D5-2 D5-3 D5-4 D5-5

MFR#

ANGLE

D5-PR35-1 D5-PR35-1 D5-PR35-1 D5-PR35-1 D5-PR35-1 D5-PR35 D5-PR35 D5-PR35 D5-PR35 D5-PR35

flat flat flat flat flat right angle right angle right angle right angle right angle

LENGTH (FT) 1 2 3 4 5 1 2 3 4 5

QUARTER-TURN FASTENERS

PANEL THICKNESS

CUP DIMENSION “B”

3506SC38A3506SC44A-

0.060-0.069 inches 0.120-0.129 inches

0.080 inches 0.140 inches

AA2-038-1930 AA2-044-1930

4

DZUS Rail receptacle strips act as a supporting frame for the panels or removable parts to be fastened with continuous holes for stud engagement and rivet mounting on 3/8” (9.53 mm) centers. These strips are riveted to a support member and the stud panel rests against the strip face that has the stud holes. The strips are aluminum alloy with a continuous rigid stainless steel wire staked across the underside of the stud holes. The fastened panel rests on the strip and its captive quarter-turn studs engage the rigid wire. –– Strip extrusion is aluminum alloy 6061-T6 and the wire is stainless steel type 316, condition B with spring temper. Right angle and flat Dzus rails

Tool

QUARTER-TURN FASTENER TOOL 991635AHT

9916-35-AHT-BB

dimensions: 3 x 3-1/4 in

*Specify desired length when ordering.

Fasteners

RADIORAX AVIONICS MOUNTING SYSTEM RADIORAX TRAY MOUNT RAIL KITS Radiorax mounting systems provide an effective, simple way to install avionics. These mounting systems are strong, STC’d without backstrapping, stable, and they’re easy to align. What is more, they make upgrades simple and they’re highly cost effective. Purchase the EDMO# RK400, Installation Spacer Kit for easier installation with Radiorax products. EDMO#

MFR#

USAGE

RK1000

RK1000

Single stack, standard rail tray mount kit

RK1005

RK1005

Cessna-specific kit, 182/205/206/210/337

RK1010

RK1010

Single stack, flanged rail tray mount kit

RK1020

RK1020

Single stack, reduced rail tray mount kit

RK1027

RK1027

Single stack, minimum rail tray mount kit

RK1040

RK1040

Single stack, canted rail tray mount kit designed for Beech Baron and other installs

RK2000

RK2000

Dual stack, standard outer and full dimension center rail tray mount kit

RK2010

RK2010

Dual stack, flanged outer and full dimension center rail tray mount kit

RK2020

RK2020

Dual stack, reduced outer and full dimension center rail tray mount kit

RK2025

RK2025

Dual stack, reduced outer and reduced dimension center rail tray mount kit

RK2027

RK2027

Dual stack, minimum outer, and minimum dimension center rail tray mount kit

*Call for additional sizes.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

87

Avionics & Instrument Mounting Mounting Systems

4

RAIL INSTALLATION SPACER KIT

QUARTER TURN FASTENER ADAPTER KITS

EDMO# RK400 MFR# RK400 The RK400 rail installation spacer kit is the most accurate way to install a Radiorax tray mount rail kit. This kit simplifies alignment and rail spacing—giving users more time to devote to the actual avionics installation. Each kit includes two installation spacers, mounting hardware, a special 7/32-inch cap screw driver adapter, and full documentation.

Quarter turn fastener adapter kit allows users to integrate quarter-turn fastener mount avionics into a tray mount stack more easily. These fully adjustable systems provide a hassle-free way to combine these two separate mounting methods with an attractive finish when installed. Each adapter consists of three pieces: rail interface, spacer (visible portion), and a quarter-turn fastener.

TRAY MOD TOOL KIT

TRAY CAM KITS The RK5000 tray cam kits help move that one unit in the stack that doesn’t quite line up with the rest, as mixed vendor stacks may not perfectly match. Tray cams provide the adjustability needed to fine-tune an installation. Tray cam used in avionics stack.

TRAY CAM INSTALL TOOL KIT

EDMO# RK100 MFR# RK100 An efficient and precise way to modify avionic trays for proper mounting to the Radiorax RP1110-P Reduced Dimension Center and RP1115-P Minimum Dimension Center Rails. Kit includes: –– 304 stainless RT100 Drill Guide –– Structural #6 screws for attaching and tray dimpling –– #27 drill bit

EDMO# RK500 MFR# RK500 The RK500 tray cam installation tool kit can quickly modify an avionics tray for installation of an RK5000 tray cam kit. Kit includes: –– RT500 Adjustable Drill Guide –– .5-in hole punch –– .25-in Jobber Drill Bit

UNIVERSAL MOUNTING BRACKET

CLOSE OUT PANEL KIT

TA SERIES TRAY ADAPTERS

PRECISION AVIATION

EDMO# PACMG-2 MFR# PACMG-2 Universal mount for many aircraft using a glare shield or deck mount. Compatible with Beech Baron and Bonanza, Cessna Skyhawk, Skylane, and Cardinal.

Simple, efficient, and attractive, these panels are the answer to completing an avionics stack. Slotted mounting flanges are designed to fasten securely into both Radiorax and non-Radiorax avionics installations, ensuring a perfect fit regardless of the thickness of the panel or type of rail used. These panels are available in 12-inch lengths that can be cut to length using a die grinder or band saw. –– Constructed with 0.090 aluminum

EDMO# RK4000-12 RK4000-12A

MFR#

DESCRIPTION

RK4000-12 RK4000-12A

chem film black anodize

COBHAM TA Series Tray Adapters help installers to create a cohesive, finished look in the cockpit when installing avionics that are dissimilar in appearance. These units convert common-size 3/4-turnTA03-001 mount (or Dzus-mount) products into 6.25-inch tray mount products that fit flush with the panel and eliminate height and mount variations. –– Light CNC milled aluminum with black trim –– No adjustments required –– Fits different mounting sizes EDMO# TA03-001 TA04-001 TA05-001 TA06-001 TA07-001 TA08-001 TA09-001

88

1.800.235.3300 | edmo.com

MFR# TA03-001 TA04-001 TA05-001 TA06-001 TA07-001 TA08-001 TA09-001

HOLES 3 4 5 6 7 8 9

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Hardware

TA SERIES QUARTER TURN FASTENER TRAY ADAPTERS

EDMO#

MFR#

HOLES

SIZE

TA03-001 TA04-001 TA05-001

TA03-001 TA04-001 TA05-001

3 4 5

1.16 in 1.55 in 1.92 in

TA06-001 TA07-001 TA08-001 TA09-001

TA06-001 TA07-001 TA08-001 TA09-001

6 7 8 9

2.30 in 2.67 in 3.05 in 3.43 in

TA03-001

TA06-001

MFR#

THREAD

AN526C632R4 AN526C632R6 AN526C632R8 AN526C632R12 AN526C632R16 AN526C832R4 AN526C832R6 AN526C832R8 526C832R12 AN526C832R16 AN526C1032R4 AN526C1032R6 AN526C1032R8 AN526C1032R12 AN526C1032R16

LENGTH (IN)

6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 10-32 10-32 10-32 10-32 10-32

1/4 3/8 1/2 3/4 1 1/4 3/8 1/2 3/4 1 1/4 3/8 1/2 3/4 1

4

The TA Series Tray Adapters convert common size Dzus mount products into 6.25-inch tray mount products. Essentially, the TA Series makes it possible for technicians to flush mount mixed avionics quickly and easily while eliminating variations in instrument height and mount designs create polished, coordinated looking instrument installations. –– Constructed with high quality CNC-milled aluminum –– No adjustments required –– Reduces the need for stocking Dzus and tray mounts –– Reduces installation and labor time –– Fits different mounting sizes –– Black in color –– Tested to DO-160D vibration and shock standards for equipment < 5 lb

EDMO# 526C632R4 526C632R6 526C632R8 526C632R12 526C632R16 526C832R4 526C832R6 526C832R8 526C832R12 526C832R16 526C1032R4 526C1032R6 526C1032R8 526C103212 526C103216

PHILLIPS TRUSS HEAD SCREW/CARBON STEEL Phillips truss head screws. Carbon steel construction per FED-STD-66. Cadmium finish per QQ-P-416, Type I. TA07-001 FITS PRODUCT AA12, AA21, AA20/22, AA30 AA24, PTA12-100 AA95, ACP51, AMS42/44, NPX138N 380, TH250/350 N301A, NPX136D, AA25 3110, ACP53, AA97 TH450B

EDMO# 526440R8 526632R6 526632R8 526-632R12 526832R6 526832R8 526832R10 5261032R10 5261032R12

MFR#

THREAD

AN526-440R8 AN562-632R6 AN526-632R8 AN526-632R12 AN526-832R6 AN526-832R8 AN526-832R10 AN526-1032R10 AN526-1032R12

LENGTH (IN)

4-40 6-32 6-32 6-32 8-32 8-32 8-32 10-32 10-32

1/2 3/8 1/2 3/4 3/8 1/2 5/8 5/8 3/4

PHILLIPS PAN HEAD SCREW/CARBON STEEL Phillips pan head screws. Carbon steel construction with a cadmium finish per QQ-P-416, Type I.

HARDWARE

EDMO#

SCREWS TRUSS HEAD, SELF TAPPING/STAINLESS STEEL Self-tapping truss head screws. Stainless steel construction. EDMO# 6RX3/8THA 6RX1/2THA 8RX1/2FHB 8RX1/2THA 10RX1/2THA 10RX3/8THA

MFR# 6RX3/8THA 6RX1/2THA 8RX1/2FHB 8RX1/2THA 10RX1/2THA 10RX3/8THA

LENGTH (IN) 3/8 1/2 1/2 1/2 1/2 3/8

Call for additional sizes.

PHILLIPS TRUSS HEAD SCREW/STAINLESS STEEL Phillips truss head screws. 300 series stainless steel construction with a passivated finish.

35206213 35206214 35206215 35206-216 35206217 35206218 35206219 35206221 35206225 35206226 35206-227 35206228 35206-229 35206230 35206231 35206232 35206233 35206234 35206236 35206238 35206243 35206-244 35206245 35206246

MFR# MS35206-213 MS35206-214 MS35206-215 MS35206-216 MS35206-217 MS35206-218 MS35206-219 MS35206-221 MS35206-225 MS35206-226 MS35206-227 MS35206-228 MS35206-229 MS35206-230 MS35206-231 MS35206-232 MS35206-233 MS35206-234 MS35206-236 MS35206-238 MS-35206-243 MS35206-244 MS35206-245 MS35206-246

THREAD 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32

LENGTH (IN) 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/2 2 3/8 7/16 1/2 5/8

Call for additional sizes.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

89

Avionics & Instrument Mounting Hardware

EDMO#

4

35206247 35206248 35206249 35206251 35206253 35207261 35207263 35207264 35207265 35207267

MFR#

THREAD

MS 35206-247 MS35206-248 MS35206-249 MS35206-251 MS35206-253 MS35207-261 MS35207-263 MS35207-264 MS35207-265 MS35207-267

LENGTH (IN)

8-32 8-32 8-32 8-32 8-32 10-32 10-32 10-32 10-32 10-32

3/4 7/8 1 1-1/2 2 3/8 1/2 5/8 3/4 1

Call for additional sizes.

PHILLIPS PAN HEAD SCREW/STAINLESS STEEL Phillips pan head screws. 300 series stainless steel construction with a passivated finish per ASTM A380. EDMO# MS51957-2 MS51957-3 MS51957-10 5195713 5195715 5195717 5195719 5195721 5195726 5195727 5195728 5195730 5195732 5195734 5195741 MS51957-42 MS51957-43 5195745 5195747 5195749 51958-64 51958-68

MFR#

THREAD

MS51957-2 MS51957-3 MS51957-10 MS51957-13 MS51957-15 MS51957-17 MS51957-19 MS51957-21 MS51957-26 MS51957-27 MS51957-28 MS51957-30 MS51957-32 MS51957-34 MS51957-41 MS51957-42 MS51957-43 MS51957-45 MS51957-47 MS51957-49 MS51958-64 MS51958-68

2-56 2-56 2-56 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 10-32 10-32

LENGTH (IN) 3/16 1/4 3/4 1/4 3/8 1/2 3/4 1 1/4 5/16 3/8 1/2 3/4 1 1/4 5/16 3/8 1/2 3/4 1 5/8 1-1/4

PHILLIPS PAN HEAD SCREW/ALLOY STEEL Phillips pan head screws. Alloy steel construction (tensile strength: 160,000 – 180,000 PS). Cadmium finish per QQ-P-416. EDMO#

90

MFR#

THREAD

LENGTH (IN)

NAS600-6 NAS600-8P NAS601-24P NAS601-4P NAS601-6P NAS601-8B

NAS600-6 NAS600-8P NAS601-24P NAS601-4P NAS601-6P NAS601-8B

4-40 4-40 6-32 6-32 6-32 6-32

3/8 1/2 1-1/2 1/4 3/8 1/2

NAS602-4 NAS602-5 NAS602-6 NAS602-8 NAS602-8P NAS602-12P NAS603-4

NAS602-4 NAS602-5 NAS602-6 NAS602-8 NAS602-8P NAS602-12P NAS603-4

8-32 8-32 8-32 8-32 8-32 8-32 10-32

1/4 5/16 3/8 1/2 1/2 3/4 1/4

FINISH CODE Type I, Class II Type II, Class II Type II, Class II Type II, Class II Type II, Class II Type II, Class II black chromate Type I, Class II Type I, Class II Type I, Class II Type I, Class II Type II, Class II Type II, Class II Type I, Class II

1.800.235.3300 | edmo.com

NAS603-6P

NAS603-6P

10-32

3/8

Type II, Class II

PHILLIPS PAN HEAD SCREW/BLACK BRASS Phillips pan head screws. Brass construction with a black oxide +A15 finish. EDMO# 3521412 MS35214-13 3521414 MS35214-15 3521416 3521418 MS35214-25 MS35214-26 3521427 MS35214-28 3521429 MS35214-30 3521431 MS35214-32 3521433 3521442 MS35214-44 MS35214-45 3521446 3521448 3521555 MS35214-59 3521560

MFR# MS35214-12 MS35214-13 MS35214-14 MS35214-15 MS35214-16 MS35214-18 MS35214-25 MS35214-26 MS35214-27 MS35214-28 MS35214-29 MS35214-30 MS35214-31 MS35214-32 MS35214-33 MS35214-42 MS35214-44 MS35214-45 MS35214-46 MS35214-48 MS35215-55 MS35214-59 MS35215-60

THREAD 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 10-32 10-32 10-32

LENGTH (IN) 1/4 5/16 3/8 7/16 1/2 3/4 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 1/2 3/4 7/8 1 1-1/2 1/2 1 1-1/4

Call for additional sizes.

PHILLIPS FLAT HEAD SCREW/CARBON STEEL 100 degree Phillips flat head screws with 300 series carbon steel construction. Cadmium finish per QQ-P-416, Type I. EDMO# MS24693S1 24693S2 MS24693S8 MS24693S24 MS24693S25 MS24693S26 MS24693S28 MS24693S30 MS24693S32 MS24693S50 MS24693S52 MS24693S54 24693S272 24693S273

MFR# MS24693S1 24693S2 MS24693S8 MS24693S24 MS24693S25 MS24693S26 MS24693S28 MS24693S30 MS24693S32 MS24693S50 MS24693S52 MS24693S54 MS24693S272 MS24693S273

THREAD 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 10-32 10-32

LENGTH (IN) 3/16 1/4 3/8 1/4 5/16 3/8 1/2 3/4 1 1/2 3/4 1 1/2 5/8

Call for additional sizes.

PHILLIPS FLAT HEAD SCREW/CARBON STEEL 100 degree flat head screws constructed with carbon steel per FED-STD-66 with a cadmium finish per QQ-P-416, Type II. EDMO# 24693-S27

MFR# MS24693S27

THREAD 6-32

LENGTH (IN) 7/16

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Hardware

EDMO# 24693-S274 24693-S276 24693-S28 24693-S29 24693-S30 24693-S32 24693-S54 24693-S6

MFR# MS24693S274 MS24693S276 MS24693-S28 MS24693-S29 MS24693-S30 MS24693-S32 MS24693-S54 MS24693S6

THREAD 10-32 10-32 6-32 6-32 6-32 6-32 8-32 4-40

LENGTH (IN) 3/4 1 1/2 5/8 3/4 1 1 1/2

100 degree Phillips flat head screws with alloy steel construction. Cadmium finish per QQ-P-416, Type II, Class 3. EDMO# MS24694S50 MS24694S51 MS24694S54 MS24694S58 MS24694S59

MFR# MS24694S50 MS24694S51 MS24694S54 MS24694S58 MS24694S59

THREAD 10-32 10-32 10-32 10-32 10-32

MFR# MS24693C50 MS24693C51 MS24693C52 24693C53 MS24693C54 MS24693C56 MS24693c58 MS24693C272 MS24693C273 24693C274 MS2469C275 MS24693C276 MS24693C278 MS24693C280 24693C282

THREAD 8-32 8-32 8-32 8-32 8-32 8-32 8-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32

LENGTH (IN) 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 1/2 5/8 3/4 7/8 1 1-1/4 1-1/2 1-3/4

4

PHILLIPS COUNTERSUNK SCREW/ALLOY STEEL

EDMO# 24693C50 24693C51 24693C52 24693C53 24693C54 24693C56 24693C58 24693C272 24693C273 24693C274 24693C275 24693C276 24693C278 24693C280 24693C282

LENGTH (IN) 1/2 9/16 3/4 1 11/16

Not finding what you're looking for? We have more sizes available online—be sure to visit us at edmo.com or give us a call. It’s likely we have what you need, or we can order it for you. Call today at 1.800.235.3300.

PHILLIPS FLAT HEAD SCREW/BLACK BRASS Countersunk 100 degree Phillips flat head screws. Brass construction with a black oxide finish.

PHILLIPS COUNTERSUNK SCREW/ALLOY STEEL Phillips countersunk screws. Alloy steel construction with a cadmium finish per QQ-P-416. Tensile strength is 125,000 – 145,000 PS. EDMO# 514P632-4 514P632-4P 514P632-6 514P632-7P 514P632-8P 514P632-9 514P832-8P 514P83216P

MFR# NAS514P632-4 NAS514P632-4P NAS514P632-6 NAS514P632-7P MAS514P632-8P NAS514P632-9 NAS514P832-8P NAS514P832-16P

THREAD 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32

EDMO# LENGTH (IN) 1/4 1/4 3/8 7/16 1/2 9/16 1/2 1

Call for additional sizes.

PHILLIPS FLAT HEAD SCREW/STAINLESS STEEL 100 degree Phillips flat head screws with 300 series stainless steel construction. Passivated finish per ASTM A380. EDMO# 24693C2 24693C4 24693C6 24693C7 24693C8 24693C10 24693C24 24693C25 24693C26 24693C28 24693C29 24693C30 24693C32 24693C46 24693C48

MFR# MS24693C2 MS24693C4 MS24693C6 MS24693C7 MS24693C8 MS24693C10 MS24693C24 MS24693C25 MS24693C26 MS24693C28 MS24693C29 MS24693C30 MS2469C32 MS24693C46 MS24693C48

THREAD 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32

LENGTH (IN) 1/4 3/8 1/2 5/8 3/4 1 1/4 5/16 3/8 1/2 5/8 3/4 1 1/4 3/8

24693BB2 24693BB4 24693BB6 24693BB24 24693BB26 24693BB27 24693BB28 24693BB30 24693BB31 24693BB32 24693BB34 24693BB36 24693BB40 24693BB50 24693BB51 24693BB52 24693BB54 24693BB56 24693BB58 24693BB56 24693BB58 24693BB276

MFR# MS24693BB2 MS24693BB4 MS24693BB6 MS24693BB24 MS24693BB26 MS24693BB27 MS24693BB28 MS24693BB30 MS24693BB31 MS24693BB32 MS24693BB34 MS24693BB36 MS24693BB40 MS24693BB50 MS24693BB51 MS24693BB52 MS24693BB54 MS24693BB56 MS24693BB58 MS24693BB56 MS24693BB58 MS24693BB276

THREAD 4-40 4-40 4-40 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 10-32

LENGTH (IN) 1/4 3/8 1/2 1/4 3/8 7/16 1/2 3/4 7/8 1 1-1/4 1-1/2 2 1-2 5/8 3/4 1 1-1/4 1-1/2 1-1/4 1-1/2 1

PHILLIPS WASHER HEAD SCREW/ALLOY STEEL Phillips washer head screws. Alloy steel construction per MIL-S-6050. Cadmium finish per QQ-P-416, Type I, Class C. EDMO# 525832R10 525832R6 525832R8 52510R10

MFR# AN525-832R10 AN525-832R6 AN525-832R8 ANA525-10R10

THREAD 8-32 8-32 8-32 10-32

LENGTH (IN) 5/8 3/8 1/2 5/8

Call for additional sizes.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

91

Avionics & Instrument Mounting Hardware

EDMO#

MFR#

52510R6 52510R8

THREAD

AN525-10R6 AN525-10R8

LENGTH (IN)

10-32 10-32

3/8 1/2

Call for additional sizes.

EDMO# 3533339 3533340 3533341 3533342

MFR# MS35333-39 MS35333-40 MS35333-41 MS35333-42

BOLT SIZE

THICKNESS (IN)

#10 1/4 in 5/16 in 3/8 in

0.025 0.028 0.034 0.040

WASHERS NUTS & NUT PLATES

4

WASHER/STAINLESS STEEL Flat, stainless steel aircraft washers with a passivated finish. EDMO# 1149CN432R 1149CN616R 1149CN632R 1149CN816R 1149CN832R 1149C0332R 1149C0363R 1149C0632R

MFR#

SELF LOCK NYLON NUT/STEEL

BOLT SIZE

NAS1149CN432R NAS1149CN616R NAS1149CN632R NAS1149CN816R NAS1149CN832R MS1149C0332R NAS1149C0363R NAS1149C0632R

#4 #6 #6 #8 #8 #10 #10 3/8

THICKNESS (IN) 0.032 0.016 0.032 0.016 0.032 0.032 0.063 0.032

Carbon steel aircraft washers with cadmium plating.

1149FN432P 1149FN616P 1149FN632P 1149FN816P 1149FN832P 1149F0316P 1149F0332P 1149F0363P 1149F0463P

EDMO# 21083N04 21083N06 21083N08 21083N3

MFR#

THREAD SIZE

MS21083N04 MS21083N06 MS21083N08 MS21083N3

4-40 6-32 8-32 10-32

Call for additional sizes.

SELF LOCK NYLON NUT/STEEL/TALL

WASHER/CARBON STEEL

EDMO#

Self-locking hexagonal nut plates constructed with 300-series corrosion-resistant stainless steel with a cadmium type II finish per QQ-P416 and passivated per QQ-P-35.

MFR#

BOLT SIZE

NAS1149FN432P NAS1149FN616P NAS1149FN632P NAS1149FN816P NAS1149FN832P NAS1149F0316P NAS1149F0332P NAS1149F0363P NAS1149F0463P

#4 #6 #6 #8 #8 #10 #10 3/16 1/4

THICKNESS (IN) 0.032 0.016 0.032 0.016 0.032 0.016 0.032 0.063 0.063

Hexagonal self-locking nuts with nylon inserts. Carbon steel nuts have a cadmium finish per QQ-P-416. Stainless steel nuts are passivated per QQ-P35. EDMO# 21044N04 21044N06 21044N08 21044N3 21044N4 21044N6

MFR#

THREAD SIZE

MS21044N04 MS21044N06 MS21044N08 MS21044N3 MS21044N4 21044N6

4-40 6-32 8-32 10-32 1/4-28 3/8-24

SELF LOCK NUT/STEEL Carbon and alloy steel construction with a cadmium finish per QQ-P-416 type II.

SPLIT STEEL LOCK WASHERS/STEEL Split lock washer in carbon steel with cadmium plating. EDMO# 3533840 3533841 3533842 3533843

MFR# MS35338-40 MS35338-41 MS35338-42 MS35338-43

BOLT SIZE #4 #6 #8 #10

EDMO# THICKNESS (IN) 0.025 0.031 0.040 0.047

MS21045-3 MS21045-4 MS21045-5 MS21045-6

MFR# MS21045-3 MS21045-4 MS21045-5 MS21045-6

THREAD SIZE 10-32 1/4-28 5/16-24 3/8-24

Call for additional sizes.

Call for additional sizes.

SELF LOCK NUT/STEEL

LOCKWASHER/STEEL

Carbon and alloy steel self-locking nuts with a cadmium finish per QQ-P-416 Type II. 450°

Internal tooth steel lock washers with cadmium plating per QQ-P-416 Type II and zinc finish. EDMO# 3533336 3533337 3533338

92

MFR# MS35333-36 MS35333-37 MS35333-38

BOLT SIZE #4 #6 #8

THICKNESS (IN) 0.019 0.021 0.023

1.800.235.3300 | edmo.com

EDMO#

MFR#

THREAD SIZE

2104204

MS21042-04

4-40

2104206

MS21042-06

6-32

Call for additional sizes.

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Hardware

SELF LOCK NUT PLATE/STEEL

EDMO#

Carbon and alloy steel two-lug nut plates with reduced rivet spacing. Finished with cadmium per QQ-P416 Type II and dry film lube per MIL-N-25027. EDMO# 21047L06 21047L08

MFR# MS21047L06 MS21047L08

MFR#

RC500-8-3 SL211081SL231061-

THREAD SIZE 6-32 8-32

Self-locking, clip-on nuts. Constructed with steel and heat-resistant to 450°F.

THREAD SIZE 6-32 8-32 10-32

Carbon and alloy steel two-lug nut plates with reduced rivet spacing. Finished with cadmium per QQ-P-416 Type II and dry film lube per MIL-N-25027. EDMO# 21069-L06 21069-L08

MFR# MS21069L06 MS21069L08

THREAD SIZE 6-32 × .661 8-32 × .692

6-32 8-32 10-32

RIVET NUT Aluminum alloy flat head rivet nuts with an anodized finish per MIL-A-8625. Both keyless and keyed available. EDMO#

MINI STEEL NUTPLATE/STEEL

THREAD SIZE

BACN10FX61 BACN10FX83 BACN10YD1

4

MFR#

MFR#

BACN10FX61 BACN10FX83 BACN10YD1

Two-lug floating nut plates constructed with carbon and alloy steel 125 KSI. Finished with cadmium per QQ-P-416 Type II and dry film lube per MIL-N-25027 (21059L08 only).

MS21059L06 MS21059L08 MS21059-3

0.1900-32 0.1640-32 0.1380-32

CLIP ON NUT

EDMO#

SELF LOCK NUT PLATE/STEEL

EDMO#

THREAD SIZE

one tab two tabs two tabs

Call for additional sizes.

Call for additional sizes.

21059L06 21059L08 21059-3

TAB #

RC500-8-3 SL211-08-1SP9 SL231-06-1-281

132904K60 1329A06-75 1329A06120 1329A06K75 1329A08-75 1329A08120 1329A08K75 1329A3-80 1329A3K80

MFR#

DESCRIPTION

NAS1329A04K60 NAS1329A06-75 NAS1329A06-120 NAS1329A06K75 NAS1329A08-75 NAS1329A08-120 NAS1329A08K75 NAS1329A3-80 NAS1329A3K80

THREAD SIZE

rivet nut/keyed rivet nut/keyless rivet nut/keyless rivet nut/keyed rivet nut/keyless rivet nut/keyless rivet nut/keyed rivet nut/keyless rivet nut/keyed

4-40 6-32 6-32 6-32 8-32 8-32 8-32 10-32 10-32

Call for additional sizes.

STEEL INSERTS

NUT PLATE/STEEL Two-lug floating nut plates constructed with carbon and alloy steel 125 KSI. Finished with cadmium per QQ-P-416 Type II and dry film lube per MIL-N-25027. EDMO# 21075L06N 21075L08N 21075L3N

MFR# MS21075L06N MS21075L08N MS21075L3N

THREAD SIZE 6-32 8-32 10-32

Knurled, threaded steel inserts with zinc plating. Open end. EDMO# AKS4-1032 AKS4-632 AKS4-832

MFR#

DESCRIPTION

AKS4-1032-130 AKS4-632-80 AKS4-832-80

THREAD SIZE

10-32/grip / .130 insert 6-32/grip / .80 insert 8-32/grip / .80 insert

10-32 6-32 8-32

Call for additional sizes.

COTTER PIN TINNERMAN CLIP/SILVER

EDMO# S10233-3B MFR# C8095-632-3B Silver, zinc electroplate snap ring for U-type nuts. 6-32 thread.

CLIP NUT Floating clip nuts with one or two tabs. Carbon steel construction and a cadmium finish per QQ-P-416 Type II, Class 2. Dry film lube per MIL-L-46010.

EDMO DISTRIBUTORS

Cadmium-plated carbon steel cotter pins. Passivated and corrosion resistant per ASTM A380 and QQ-P-416 Type 1. EDMO# MS24665134 MS24665136 MS24665281 MS24665362

MFR# MS24665134 MS24665136 MS24665-281 MS24665-362

1.800.235.3300 | edmo.com

DIMENSIONS (IN) 3/4 × 1/16 1 × 1/16 1/2 × 3/32 1/8 × 2-1/2

93

Avionics & Instrument Mounting Hardware

SAFETY LOCKWIRE

MASTER HEX SOCKET HEAD SCREW SETS

Stainless steel lockwire with a bare finish, spools from a canister.

Stainless steel master hex socket screw kits for use with Bristol wrenches.

EDMO#

MFR#

LENGTH (FT)

34-0200-1BLC 34-0320-1BLC 34-0410-1BLC

DIAMETER (IN)

931 364 221

0.02 0.032 0.041

EDMO#

4

SAFEWIRE20 SAFEWIRE32 SAFEWIRE41

SAFETY CABLE TOOL KIT This safety cable kit contains a ferrule and a stainless steel safety cable (lengths and diameters specified below). Comes in a pack of 50. EDMO# C10-212PKG C10-218PKG C10-221PKG

MFR#

LENGTH (IN)

C10-212PKG C10-218PKG C10-221PKG

DIAMETER (IN)

12 18 21

K-H256-2 K-H348-2 K-H440-2 K-H440-3 K-H540-2 K-H540-3 K-H632-2 K-H632-3 K-H832-2 K-H832-3 K-H836-2 K-H836-3

MFR#

THREAD

K-HS256X18B K-HS348X18B K-HS440X1/8B K-HS440X316B K-HS540X18B K-HS540X316B K-HS632X18B K-HS632X316B. K-HS832X18B K-HS832X316B K-HS836X18B K-HS836X316B

2-56 3-48 4-40 4-40 5-40 5-40 6-32 6-32 8-32 8-32 8-36 8-36

LENGTH (IN) 1/8 1/8 1/8 3/16 1/8 3/16 1/8 3/16 1/8 3/16 1/8 3/16

PIECES 8 6 6 6 6 6 6 6 6 7 6 6

0.032 0.032 0.032

MASTER HEX/SPLINE SET-SCREW KITS The Master Set Screw kit includes 20 set screws and 9 sizes of their corresponding L-key hex wrenches. MHS-2 includes hex set screws, MSS-2 includes spline set screws, and the MSSHS-2 kit combines the MHS-2 and MSS-2 kits and contains both hex and spline set screws in addition to their corresponding wrenches

SPLINE SCREW SETS Stainless steel spline screw kits for use with Bristol wrenches. EDMO# K-4S172-2 K-4S172-3 K-4S256-2 K-4S256-3 K-4S348-2 K-4S348-3 K-4S540-2 K-4S632-2 K-4S632-3 K-4S640-3 K-6S1032-2 K-6S1032-3 K-6S440-2 K-6S440-3 K-6S832-2 K-6S832-3 K-6S836-2 K-6S836-3

MFR# K-SS172X18B4 K-SS172X316B4 K-SS256X18B4 K-SS256X316B4 K-SS348X18B4 K-SS348X316B4 K-SS540X18B4 K-SS632X18B4 K-SS632X316B4 K-SS640X316B4 K-SS1032X18B6 K-SS1032X316B6 K-SS440X18B6 K-SS440X316B6 K-SS832X18B6 K-SS832X316B6 K-SS836X18B6 K-SS836X316B6

THREAD/ LENGTH (IN) 1-72 × 1/8 1-72 × 3/16 2-56 × 1/8 2-56 × 1/8 3-48 × 1/8 3-48 × 3/16 5-40 × 1/8 6-32 × 1/8 6-32 × 3/16 6-40 × 3/16 10-32 × 1/8 10-32 × 3/16 4-40 × 1/8 4-40 × 3/16 8-32 × 1/8 8-32 × 3/16 8-36 × 1/8 8-36 × 3/16

SPLINES 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6

PIECES 5 5 5 5 5 5 5 6 6 5 3 3 6 6 4 4 3 3

Call 1.800.235.3300 for additional sizes.

94

1.800.235.3300 | edmo.com

MSSHS-2 EDMO#

MFR#

MHS-2

MHS-2

MSS-2

MSS-2

MSSHS-2

MSSHS-2

MHS-2

COMPONENTS 10 kits of hex 1-72 to 10-32; 1/8-inch lengths 10 kits of hex 1-72 to 10-32; 3/16-inch lengths 9 sizes of L-key hex wrenches 10 kits of spline 1-72 to 10-32; 1/8-inch lengths 10 kits of spline 1-72 to 10-32; 3/16-inch lengths 9 sizes of L-key hex wrenches 10 kits of spline 1-72 to 10-32; 1/8-inch lengths 10 kits of spline 1-72 to 10-32; 3/16-inch lengths 9 sizes of L-key spline wrenches 10 kits of hex 1-72 to 10-32; 1/8-inch lengths 10 kits of hex 1-72 to 10-32; 3/16-inch lengths 9 sizes of L-key hex wrenches

EDMO DISTRIBUTORS

Avionics & Instrument Mounting Cooling Fans

SCREWGRAB

SAFE 128 & 328 COOLING FANS

EDMO# SG-1 MFR# SG-1 ScrewGrab is a friction gel that helps remove or tighten all types of fasteners—damaged or rusted screws, nuts, and bolts. ScrewGrab works by creating a positive grip between metal surfaces (tests have shown that grip is increased by up to 800%). Subsequently, ScrewGrab also reduces tool wear and prevents the stripping, rounding, or deforming of fasteners. –– Helps to remove fasteners that are stripped, rounded, deformed, rusted or hard to reach –– Works instantly and wipes clean after use –– Non-corrosive and does not act as a glue –– Unlimited shelf-life

SANDIA AEROSPACE The SAFE series cooling fans are axial fans that attach directly to an avionics unit’s cooling port. These fans provide a nominal 20 CFM of cooling air and an alert output whenever the fan RPM drops below a preset level. The SAFE series uses a high quality, brushless blower motor and or RunQuiet technology.

4

SAFE 128

weight:

COOLING FANS

dimensions: operating voltage: current draw:

ACF 314 & 328 COOLING FANS SANDIA AEROSPACE The ACF 314 and ACF 328 are 3-port cooling fans with the ability to cool up to three avionics units and the capacity to cool up to 20 cubic feet of air per minute. The ACF 314 and ACF 238 operate on 14 VDC and 28 VDC respectively using a high-quality, brushless blower motor and or RunQuiet technology. The ACF 528 is similar to the ACF 314 and ACF 328 but is equipped with five ports and the ability to cool up to five avionics units while operating on 28 VDC.

ACF314

weight: dimensions: operating voltage: current draw: certification:

EDMO# ACF314 ACF328 ACF528

certification:

EDMO# 305468-00 305467-00

SAFE 328

SAFE 128: 0.25 lb SAFE 328: 0.7 lb SAFE 128: 2.36 × 2.87 × 1.44 in SAFE 328: 5.58 × 4.75 × 1.25 in 22-31 VDC SAFE 128: 100mA nominal < 0.250 mA startup SAFE 328: 400mA nominal < 0.550 mA startup FAA-PMA

MFR# 305468-00 305467-00

MODEL # SAFE 128 SAFE 328

VOLTAGE 28 28

ACF528

1.18 lb 5.92 × 5.18 × 2.1 in ACF314: 14 VDC ACF328: 28 VDC ACF314: 960 mA (1.7 A at startup) ACF328: 480 mA (0.85 A at startup) FAA-PMA

MFR# ACF314 ACF328 ACF528

VOLTAGE 14 28 28

EDMO DISTRIBUTORS

PORTS 3 3 5

1.800.235.3300 | edmo.com

95

TAKE BACK TIME

It takes a skilled technician 24 hours to manually fabricate a typical instrument panel. It takes the Panel Pro 40 minutes to cut out the same panel. GETTING THE JOB DONE FASTER - THAT’S PANEL PRO.

Panel Pro in action

> Easy to use software included > Optional engraver & panel digitizer > 56 x 24-inch travel accommodates most full instrument panels > Material mount & chip control optimized for sheet metal work

Tooling

Tooling............................................................................................................... 98 Insertion & Extraction........................................................................................ 99 Crimp & Barrel Die Tool Sets............................................................................. 103 Wire & Cable Strippers...................................................................................... 109 Wire Cutters....................................................................................................... 111 Heat Guns......................................................................................................... 112 Soldering Irons.................................................................................................. 113 Hex & Spline Wrenches..................................................................................... 116 Drivers............................................................................................................... 118 Vises.................................................................................................................. 119 Cable Tie Tools.................................................................................................. 120

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

97

Tooling Tooling

TOOLING

EG2 ENGRAVER FOR PANEL PRO

PANEL PRO MODEL 5925

5

BULLER ENTERPRISES Reduce the time it takes to cut out a panel with the Panel Pro 5925 from Buller Enterprises; a computer-controlled router that takes cutting time down from a day to less than a couple of hours. This machine is optimized for cutting 1/8-inch thick aluminum sheet metal but is capable of handling other thicknesses as well as Plexiglas and wood. The Panel Pro cuts a wide range of sizes with accuracy to approximately 0.0002” and it has the ability to create corners and micro stop countersinks. All that’s required is a Pentium computer; the Panel Pro’s included AvCAM software is compatible with .dxf files created by AutoCAD. –– Perfect for cutting 1/8-inch thick aluminum sheet metal but able to cut aluminum as thick as ½-inch as well as other materials such as Plexiglas and wood (note: no vacuum system) –– 59-inch width travel (X axis), 25-inch height travel (y axis), and 3.125-inch up and down travel (Z axis); capable of making micro stop countersinks and other operations –– Fast cutting times: ≈1 hour, 20 minutes to complete a 4-foot wide King Air 350 panel with an average cutting speed of 12 - 15 inches per minute (speed depends on the material and desired finish) –– Included AvCAM operating software uses the Z axis of a .dxf file (if no Z coordinate is supplied as in 2D CAD, the Z depth defaults to a Z cutting depth entered by the user) –– Provides accuracy within about 0.0002 inches –– Has switches for repeatable absolute zero in X, Y, and Z as well as hard stops on the X and Y axes so that the X to Y square can be easily checked and reset –– Minimum corner radius is dependent on the end mill used; for 1/8inch, the minimum radius is 0.0625 inches –– Pentium compatible; Windows XP or 7 operating systems, 32 or 64 bit; requires a standard serial or USB port with adapter to connect with the SC3 Controller –– Requires about 4 × 6 feet of room for operation

MEASURE PRO FOR PANEL PRO This Panel Pro accessory measures individual elements such as lines, circles, and curves and saves them as a .dxf file for editing in CAD programs. Rather than a scanner or tracer, the Measure Pro is a coordinate measuring device that can easily Measure Pro measure the curves incorporated into the panel perimeter as well as mounting and instrument holes. The Measure Pro system consists of a TP1 Touch Probe and measuring software. –– The TP1 Touch Probe is a switch that opens when the ruby probe tip makes contact with an edge or surface. It triggers +/- X axis, +/- Y axis, - Z axis. –– The included measuring software is part of the AvCAM software included with the Panel Pro 5925

98

1.800.235.3300 | edmo.com

The EG2 engraver consists of a precision spindle assembly with a replaceable nose that can be adjusted in 0.001 increments. This degree of precision allows the EG2 to engrave through a top layer of paint to reveal a colored sub-layer below. This accessory can be used for engraving placards, circuit breaker panels, or directly on the surface of an instrument panel. The EG2 includes the engraver assembly, one 0.010 tip width cutter, one 0.4375 steel nose, and two ¼-inch diameter Delrin nose pieces.

DIAMOND TIP ENGRAVER The Diamond Engraver is a drag type, non-rotating engraver. It works best on bare metal (brass, aluminum, stainless steel) and anodized aluminum.

shipping weight: dimensions: move resolution: Panel Pro Model 5925 Package includes:

EDMO# 1-0300-00

435 lb 48 × 24 × 73 in 0.0001968 Panel Pro 5925 machine tool SC3 controller interconnect cables Milwaukee 3-1/2 hp production quality variable/regulated speed router with a collet adapter to use industry standard ER11 collets (includes 1/8, 3/15 and ¼-inch collets) AvCAM version 11 machine operation software Easy Cad 2D computer aided drafting software a copy of Buller Enterprises’ aircraft instrument panel and instrument drawing library coolant system with 1 gallon of coolant starter supply of high strength carbide end mills hand tools needed for operation 2-inch dial indicator to check the Z level of critical areas Pen plotter adapter to draw out panels or parts in full size

MFR# 1-0300-00

Panel Pro Model 5925

ACCESSORIES 1-0112-0 1-0072-0 7-0090-0 1-0100-0C

Measure Pro 1-0072-0 7-0090-0 1-0100-0C

1-0100-1 32063

32063

7-0080-0 85297067

7-0080-0 85297067

85297083

85297083

CNV3000

CNV3000

Measure Pro for Panel Pro EG2 engraver for Panel Pro diamond tip engraver porter cable router with collet adapter for Panel Pro router with porter cable 892S installed end mill, 3/32-inch diameter, 1/8-inch shank, 3/8-inch length of cut, 2 flute, 1-1/2-inch long, carbide, single end King Air panel spacer kit double mill end, 3/32-inch diameter, 1/8inch shank double mill end, 1/8-inch diameter, 3/16inch shank step down transformer

CUTTING TIPS 15ABAL.005 15ABAL.010 15ABAL.015 M30293

M125-15ABAL.005 M125-15ABAL.010 M125-15ABAL.015 M30293

engraver tip/0.005 in cutting tip engraver tip/0.010 in cutting tip engraver tip/0.015 in cutting tip 1/8 in 2 flute cutter/end mill for Panel Pro

EDMO DISTRIBUTORS

Tooling

Insertion & Extraction

INSERTION & EXTRACTION METAL TIPPED INSERTION & EXTRACTION TOOLS Insertion and extraction tools with color coded handles and metal tips.

EDMO# 91067-1 91067-2 91066-1 91066-3 91066-4

MFR#

AWG

COLOR

91067-1 91067-2 91066-1 91066-3 91066-4

22-28 24-20 22 16 20

green and white; metal tip red and white; metal tip green and white; metal tip blue and white; metal tip red and white; metal tip

126195-2 126195-3 126195-4

91067-1 (extraction end) 91067-2 (insertion) 91067-2 (extraction)

TIPS 126195-2 126195-3 126195-4

5

INSERTION & EXTRACTION TOOLS Install and removal tools for electrical connector contacts. Constructed with hard plastic bodies. Varying colors. EDMO#

MFR#

MATERIAL

TYPE

COLOR

COMPATIBLE CONNECTOR CONTACTS:

CONTACT SIZE #0 M819691408

M81969/14-08

plastic

removal

yellow

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015

M819691408

CONTACT SIZE #8 M819691406

M81969/14-06

plastic

removal

red

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-T-81714 and MIL-C-5015 MIL-C-38999 MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015

M819691412 M819692902

M81969/14-12 M81969/29-02

plastic plastic

removal removal

green red

plastic

insertion/ removal

gray/white MIL-C-38999

yellow/ white yellow/ white

M819692902

CONTACT SIZE #10 M819691405

M81969/14-05

M819691405

CONTACT SIZE #12 M8196916-3 M819691603* M819691404

M81969/16-03

plastic

insertion

MIL-C-81511 Series 3 & 4

M81969/14-04

plastic

insertion/ removal insertion/ removal insertion/ removal insertion/ removal

blue/white MIL-C-24308 and MIL-C-81659

insertion/ removal insertion/ removal insertion/ removal insertion/ removal insertion/ removal insertion/ removal

red/white

MIL-C-24308 and MIL-C-81659

red/white

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015 MIL-C-38999

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015

M819691603

CONTACT SIZE #16 M81969/103

M81969/1-03

M819691403

M81969/14-03

plastic body, metal tip plastic

M8196916-2 M819691602*

M81969/16-02

plastic

blue/white MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 and MIL-C-5015 blue/white MIL-C-81511 Series 3 & 4

M81969-103

CONTACT SIZE #20 M81969/102

M81969/1-02

M819691402

M81969/14-02

plastic body, metal tip plastic

M819691410

M81969/14-10

plastic

M819691411

M81969/14-11

plastic

M819691601

M81969/16-01

plastic

M819693901

M81969/39-01

plastic

red/orange red/white red/white green/ white

M81969-102 M819691410

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-T-81714 and MIL-C-5015 MIL-C-81511 Series 3 & 4

M819693901

MIL-C-24308 MIL-C-81659

M819691601

*Denotes alternative EDMO#

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

99

Tooling

Insertion & Extraction

EDMO#

MFR#

MATERIAL

TYPE

COLOR

COMPATIBLE CONNECTOR CONTACTS:

CONTACT SIZE #22 M81969/101

M81969/1-01

M81969/104

M81969/1-04

M819691401

M81969/14-01

plastic body, metal tip plastic body, metal tip plastic

M819691409

M81969/14-09

plastic

insertion/ removal insertion/ removal insertion/ removal insertion/ removal

green/ white green/ white green/ white brown/ white

MIL-C-24308 and MIL-C-81659

insertion/ removal

green/ white

MIL-C-81511 Series 3 & 4

MIL-C-24308 and MIL-C-81659

M819691604

MIL-C-26482, MIL-C-81703, MIL-C-83723, MIL-C-38999, MIL-T-81714 MIL-C-55302/169 /171

M81969-104

CONTACT SIZE #23 M819691604

M81969/16-04

plastic

M819691604

5

*Denotes alternative EDMO#

INSERTION & EXTRACTION TOOLS DOUBLE-ENDED INSERT/EXTRACTION TOOLS

DOUBLE-ENDED INSERT/EXTRACTION TOOL EDMO# CTA-1160 MFR# CTA-1160 Double-ended insertion and removal tool designed for size 22-20 pin (CTA-0093 & CTA-0166) and socket (CTA-0094 & CTA-0165) contacts installed in Raychem “MTCP” Series Modular Rectangular connectors.

Double-ended insertion and removal tools designed for size 20 and 22 pin and socket contacts and coaxial cable. EDMO#

MFR#

AWG

M15570-201

M15570-20-1

20

M15570-221

M15570-22-1

22

M15570-25

M15570-25

COAX

M15570-201

STAINLESS STEEL INSERTION TOOL

M15570-221

EDMO# CTA-0161 MFR# CTA-0161 Stainless steel insertion tool used to install or extract Raychem MTC series modular rectangular connector insert assemblies.

M15570-221

INSERT/EXTRACTION TOOL - INTERCHANGEABLE TIPS EDMO# 91285-1 MFR# 91285-1

Insertion and extraction tool with interchangeable tips for use with HD-22 and HD-20 contacts used in Amplimite HD connectors. This tool includes a handle, six tips, a hex wrench, and a plug. Each plug is color-coded according to specific type and wire size (refer to table).

EDMO#

CONTACT SIZE

543382-5 1-543382-0 1-543382-1 543382-6 543382-7 543382-8

HD-20 HD-20 HD-20 HD-20 HD-20 HD-22

AWG 28/20 24/18 28/24 posted posted 28/22

INSERTION/EXTRACTION TIPS COLOR CODE

TYPE

yellow red brown blue black green

insertion extraction extraction extraction insertion insertion/extraction

SNAP RING REMOVAL & INSERTION TOOLS The SRT-1 and SRT-2 are 16 inches long and was designed to install (SRT-2) and remove (SRT-1) those hard-to-get-at snap rings located in the back of avionics trays. Prevents injury to users’ fingers when removing snap rings from avionics trays. –– Color/material: plated steel –– Overall length: 6-7/8 in

100

EDMO# SRT-1 SRT-2

1.800.235.3300 | edmo.com

MFR# SRT-1 SRT-2

DESCRIPTION removal tool insertion tool

SRT-1 SRT-2

EDMO DISTRIBUTORS

Tooling

Insertion & Extraction INSTALL & REMOVAL TOOL KITS Always have the right install and removal tools at hand with these two kits. Each contains an assortment of metal install and removal tools. (88-09-002 pictured)

EDMO#

MFR#

DESCRIPTION

88-09-001

88-09-001

install tool kit

88-09-002

88-09-002

removal tool kit

KIT INCLUDES install tools: dak12 (MS24256A12) dak16 (MS24256A16) dak20 (MS24256A20) removal tools: drk12 (MS24256R12) drk16 (MS25246R16) drk20 (MS24256R20)

INSERTION TWEEZERS

EDMO# 91002-1 MFR# 910021 The AMP insertion tool for connector pins. Contact sizes 20-24 AWG.

REMOVAL TOOL

EDMO# CTJR12 MFR# CTJR12 The CTJ-R12 is a double-module removal tool designed for MIL-T-81714 terminal junction modules, grounding modules, power distribution and feedback modules. Mil spec M81714/69-02.

5

TWEEZER INSERTION/REMOVAL TOOLS INSERTION TWEEZERS Insertion tweezers.

EDMO#

MFR#

DAK95-16A DAK95-20B

SIZE

DAK95-16A DAK95-20B

16 20

REMOVAL TWEEZERS Tweezer removal tools.

PUSHBUTTON EXTRACTION TOOL STACO SYSTEMS

EDMO# 15193 MFR# 15193 Extraction tool for removing pushbuttons from switch/indicator assemblies. Removing pushbuttons provides easier access to the heads of the locking screws located inside the front portion of the switch/indicator.

BLADE EXTRACTION TOOL EDMO# 465199-1 MFR# 465199-1

DRK237 EDMO#

MIL P/N

DRK237 DRK83-16B DRK95-20B DRK95-22 DRK95-22M

-M81969/8-208 M81969/8-06

MS27495R22 MS27495R22M

SIZE 22 16 20 22 22

MOLEX EXTRACTION TOOLS Extraction tools for Molex connectors. EDMO#

This extraction tool extracts the AMP-BLADE contacts from connectors 582151, 582200, 582201, 582202, 582203, 582204, 582307, and 582389. It consists of a lance release tip for depressing the contact locking lance, and an extraction tip for pushing the contact from the connector. There is a handle for pushing the extraction tip.

MFR#

DRK237 DRK83-16B DRK95-20B DRK95-22 DRK95-22M

DRK83-16B

MFR#

FITS

W-HT-1884

W-HT-1884

-

W-HT-2038

W-HT-2038

for 0.093-in pin terminals

W-HT-2285

W-HT-2285

for 0.062-in pin terminals

Not finding what you need? EDMO maintains a large inventory of tools that is constantly being updated. If you don’t see what you need here, it’s likely we have it, or we can order it in for you. As always, give us a call at 1.800.235.3300 for parts and pricing or visit us at edmo.com.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

101

Tooling

Insertion & Extraction MIL-SPEC REMOVAL TOOLS DANIELS Removal tools.

5

EDMO#

MFR#

MIL P/N

DRK-12

MS24256R12

12

DRK-124

DRK124

MS17806

20

DRK124A

DRK124A

M81969/20-01

20

DRK16

DRK16

MS24256R16

16

DRK-16A

DRK16A

M81969/19-08

16

DRK16B

DRK16B

M81969/19-01 (REV B)

16

DRK-20

DRK-20

MS24256R20

20

DRK-20A

DRK20A

M81969/19-07 REV A

20

DRK20B

DRK20B

M81969/19-06 (REV/B)

20

SOCKET EXTRACTORS

EDMO# 305183 MFR# 305183 This extraction tool removes pin and socket contacts from Multimate connectors. The tool is comprised of a handle and sleeve that releases the contact locking lance, and a push-rod button that ejects the contacts.

contact types: contact sizes: material:

II, III, IIII(+), VI, X, and subminiature coaxial all sizes plastic and steel construction

C8 EXTRACTION TOOL

EXTRACTION TOOL

EDMO# 189727-1 MFR# 189727-1 Designed to extract Mini-Universal Mate-N-Lock Contacts from housing cavities. Consists of a push button, push rod, handle, and sleeve. The sleeve is inserted into the mating face of the housing, depressing the locking lances of the crimped contact, and allowing the contact to be extracted from the wire-entry face of the housing.

MATE-N-LOK EXTRACTION TOOL

ITT CANNON

EDMO# 465644-1 MFR# 465644-1 Tool for removing Mate-N-Lok contacts from their housings.

EXTRACTION TOOL - 20-11

EXTRACTION TOOL

EDMO# CET-C8 MFR# CET-C8 The CET-C8 is a plastic removal tool designed for coaxial contacts installed in ITT-Cannon BKAD, BKAE, BKAF, DPXMA, MIL-C-81659 and MIL-C-83733 Series rear release rectangular rack and panel connectors.

ITT CANNON

EDMO# CET20-11 MFR# CET20-11 The CET20-11 is a removal tool designed for size 20 pin (330-5291-xxx) and socket (331-1007-xxx) contacts installed in ITT-Cannon D*MA and D*U Series D-subminiature rear release rectangular connectors.

102

SIZE

DRK-12

1.800.235.3300 | edmo.com

EDMO# 91017-3 MFR# 91017-3 Extraction tool used to extract AMP-TAB male terminals from AMP-TAB quad connectors. Works with wire sizes 26- 22 and 22 – 18.

EDMO DISTRIBUTORS

Tooling

Crimp & Barrel Die Tool Sets LEAF EXTRACTION TOOLS STANDARD TOOL

TOOL FOR MOLEX/KING

REMOVAL TOOL WITH 5 PROBES

REMOVAL TOOL/FORK CONTACTS

DANIELS

DANIELS

EDMO# 465195-1 MFR# 465195-1 Extraction tool for leaf pins. This tool consists of a lance release tip for depressing the contact locking lance, an alignment tip for positioning the tool in the connector housing, and an extraction tip for pushing the contact from the connector housing.

EDMO#

MFR#

DRK105-122 DRK105-162 DRK105-222 DRK10522M2 DRK105-202

Removal tools for fork-type contacts. EDMO#

COLOR

DRK105-122 DRK105-162 DRK105-222 DRK10522M2 DRK105-202

5

EDMO# DRK105 MFR# DRK105 Removal tool with 5 interchangeable probes.

EDMO# 465195-2 MFR# 465195-2 This AMP-LEAF extraction tool extracts AMP-LEAF contacts from the following connectors: 480133, 480146, 582191, 583360-1, 583428-1, 583663-1, 5837161, 583731-1. This tool consists of a lance release tip for depressing the contact locking lance, an alignment tip for positioning the tool in the connector housing, and an extraction tip for pushing the contact from the connector housing.

yellow blue green yellow red

MFR#

DRK188

DRK188

DRK-230

DRK-230

Tool and probes not shown to scale.

CRIMP & BARREL DIE TOOL SETS AFM8 CRIMP TOOL DANIELS

EDMO# AFM8 MFR# AFM8 The AFM8 is compatible with most of the miniature and sub-miniature connector types that are widely used in electronic systems. This tool accommodates wire sizes 20 through 32 AWG. It gives a Mil-Standard 8 impression crimp that assures maximum tensile strength while the cycle-controlled precision ratchet assures consistent crimping with each use. Built into the tool frame is an 8-step selector knob that makes it easier to dial in the correct crimp depth setting for the wire being used (see table below for applicable positioners). –– AFM8-KIT: AFM8 tool kit includes 3 positioners, 2 plastic insert/removal tools and the AFM8 crimp tool

EDMO#

MFR#

MIL P/N

USE

AFM8 POSITIONERS & GAUGES K13-1 K40 K41 K42 K1-S K1461 K267-1

K13-1 K40 K41 K42 K1S K1461 K267-1

M22520/2-08 M22520/2-07 M22520/2-06 M22520/2-09 M22520/2-02 M22520/2-23

EDMO#

MFR#

MIL P/N

USE

G125 gauge

AFM8 POSITIONERS & GAUGES positioner positioner positioner positioner positioner positioner positioner

K330-3 K496-1 K503 K673 K774 G125

K330-3 K496-1 K503 K673 K774 G125

M39029/22-22-22 M39029/1-507 M39029/22-20-20 MC6018D M22520/3-1

positioner positioner positioner positioner positioner go-no-go gauge

K41 turret head

K42 turret head Additional positioner sizes available, call EDMO for information. Above parts not shown to scale.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

103

Tooling

Crimp & Barrel Die Tool Sets GMT232 COMMERCIAL CRIMP TOOLS DANIELS

EDMO# GMT232 MFR# GMT232 The GMT232 hand crimp tool is perfect for crimping low profile M81824/1-xx environmental splices and it is the most popular tool to cover the range of 12 (yellow), 16 (blue), ad 20 (red) splices for low-profile environmental splice applications. In addition, this tool is equipped with a locator that is configured to hold the splice in the correct location while either wire is being terminated. –– M22520/37-01 tool for M81824/1-X splices –– Environmental Splices (26-20, 20-16, 16-12) EDMO#

MFR#

APPLICATION/DESCRIPTION

POPULAR GMT-SERIES COMMERCIAL CRIMP TOOL OPTIONS GMT-221

Rockwell Collins thin-line I & II

GMT202

GMT202

Molex 0.062-diameter standard pin and socket terminals, KK, flat blade and pitch crimp.

5

GMT-221

Additional GMT tools available, call EDMO for details.

AF8 CRIMP TOOL DANIELS

EDMO# AF8 MFR# AF8 The AF8 “Big Blue” crimp tool is qualified to MIL-DTL-22520/1 and is compatible with the wire range of 12 through 26 AWG. With over a thousand available turret heads, the tool frame can be adapted to very specific military or proprietary contact/wire combinations. The AF8 provides an 8-impression crimp, assuring maximum tensile strength with almost every closed barrel contact. Tool requires a compatible turret head and positioner (purchased separately). –– Crimp tool dimensions: 9.75 × 2.5 × 1.25 in / 15 oz EDMO#

MFR#

MIL P/N

USE

AF8 TURRET HEADS & POSITIONERS

EDMO#

MFR#

MIL P/N

USE

AF8 TURRET HEADS & POSITIONERS

TH1A TH4 TH163 UH2-5 TP45

TH1A TH4 TH163 UH2-5 TP45

M22520/1-02 M22520/1-03 M22520/1-04 M22520/1-05 M22520/1-06

turret head turret head turret head uni positioner positioner

TP85 TH199S TP360 TP365 TP465

TP85 TH199S TP360 TP365 TP465

M22520/1-07 M22520/1-08 M22520/1-09 M22520/1-10 M22520/1-11

positioner turret head positioner positioner positioner

TH270 TH285 TP485 TP513 TP651 G125 TH501 TH502 TH70-1

TH270 TH285 TP485 TP513 TP651 G125 TH501 TH502 TH70-1

M22520/1-12 M22520/1-13 M22520/1-15 M22520/1-16 M22520/1-17 M22520/3-1 ----

turret head turret head positioner positioner positioner go-no-go gauge turret head turret head turret head

TH4 turret head UH2-5 positioner

G125 gauge

Additional positioner sizes available, call EDMO for information. Above parts not shown to scale.

HX4 CRIMP TOOL DANIELS

EDMO# HX4 MFR# HX4 The HX4 crimp tool uses a system of interchangeable dies that eliminate the need for separate fixed-die crimp tools for each application. The crimping dies are easily snapped into the frame and retained by internal spring clips. –– 11 inches long / 21 oz –– Mil-spec M22520/5-01

104

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Tooling

Crimp & Barrel Die Tool Sets

EDMO#

MFR#

MIL-SPEC

WEIGHT

DIE CLOSURE DIMENSIONS

HX4 DIE SETS A HEX I196 Y152 Y152 Y203 Y215 Y204P Y189 Y205P Y206P Y142 Y149 Y145 Y110P

Y137 Y138 Y139 Y140 Y141 Y143 Y144 Y148 Y102 Y209P Y208P Y178 Y501 Y527 Y539 Y540 Y554

M22520/5-03 M22520/5-04 M22520/5-05 M22520/5-06 M22520/5-07 M22520/5-08 M22520/5-09 M22520/5-10 M22520/5-11 M22520/5-13 M22520/5-15 M22520/5-19 M22520/5-21 M22520/5-23 M22520/5-25 M22520/5-27 M22520/5-29 M22520/5-33 M22520/5-35 M22520/5-37 M22520/5-39 M22520/5-41 M22520/5-43 M22520/5-45 M22520/5-47 M22520/5-53 M22520/5-55 M22520/5-57 M22520/5-59 M22520/5-61 M22520/5-100 M22520/5-101 M22520/5-102 M22520/5-103

0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.16 lb 0.25 lb 0.25 lb 0.25 lb 0.25 lb 0.25 lb

LENGTH

B HEX

LENGTH

0.128 0.325 0.105 0.138 0.090 0.118 0.213 0.325 0.178 0.128 0.094 -0.255 0.325 -0.128 0.375 -0.178 0.400 0.068 0.160 0.400 -0.213 0.400 0.068 0.255 0.400 0.068 0.263 0.400 0.068 0.255 0.400 0.213 0.475 0.400 -0.384 0.400 -0.426 0.400 0.100 0.532 0.400 -0.324 0.400 0.100 0.343 0.400 0.105 0.324 0.400 0.128 0.314 0.400 0.151 0.309 0.400 0.160 0.290 0.400 0.178 0.268 0.400 0.197 0.231 0.400 0.218 0.359 0.400 -0.454 0.400 -0.324 0.400 -0.255 0.400 0.100 0.255 0.400 0.100 0.429 0.400 -pre-insulated terminal crimp 26-10 AWG pre-insulated terminal crimp 26-20 AWG splice crimp 12-16 AWG splice crimp 16-26 AWG ---0.218 0.307 --

0.325 0.270 0.325 ---0.093 -0.093 0.093 0.093 0.400 --0.120 -0.120 0.400 0.400 0.400 0.400 0.400 0.400 0.400 ---0.120 0.100 --

Y197

Y205P

5

Y196 Y152 Y197 Y203 Y195 Y215 Y204P Y189 Y205P Y206P Y207P Y142 Y149 Y145 Y110P Y151 Y109P Y136 Y137 Y138 Y139 Y140 Y141 Y143 Y144 Y148 Y102 Y209P Y208P Y178 Y501 Y527 Y539 Y540 Y554 Y631

Y206P

Y142

Y149

Y137

---

Y501 Part numbers ending in “P” indicate that the die set has an alignment pin.

CERTI-LOK CRIMP TOOL

EDMO# 169400 MFR# 169400 The AMP Certi-Lok crimping tool uses interchangeable die sets (sold separately). This is a basic tool that uses interchangeable snap-in die sets, which can be easily inserted or removed. Die set EDMO# 169404 crimps AMP red / blue / yellow insulated terminals and splices (22-12 AWG). EDMO#

MFR#

DESCRIPTION

COMPATIBLE DIE SETS—SOLD SEPARATELY 169404 169409

169404

169404 169409

22-10 GA.die set (insulated) 22-10 GA. die set (uninsulated)

169409

Not finding what you need? EDMO maintains a large inventory of tools that is constantly being updated. If you don’t see what you need here, it’s likely we have it, or we can order it in for you. As always, give us a call at 1.800.235.3300 for parts and pricing.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

105

Tooling

Crimp & Barrel Die Tool Sets MH860 CRIMP TOOL DANIELS

EDMO# MH860 MFR# MH860 The MH860 is qualified to MIL-DTL-22520/7-01. This tool supports the majority of electrical systems with one versatile crimp tool frame. In addition it accepts the entire middle wire range of 16-28 AWG with positioners capable of adapting it to virtually all applications consistent with others in the MIL-DTL-22520 family.

5

86-1S

EDMO#

MFR#

MIL P/N

USE

MH860 POSITIONERS 86-1S 86-2 86-3 86-4 86-5 86-6 86-7 86-11S 86-12S 86-19 86-20 86-21

86-1S 86-2 86-3 86-4 86-5 86-6 86-7 86-11S 86-12S 86-19 86-20 86-21

520/7-02 M22520/7-03 M22520/7-04 M22520/7-05 M22520/7-06 M22520/7-07 M22520/7-08 M22520/7-09 M22520/7-10 M22520/7-11 M22520/7-12 M22520/7-13

positioner positioner positioner positioner positioner positioner positioner positioner positioner positioner positioner positioner

86-12S *Above parts not shown to scale.

WA23 CRIMP TOOL

EDMO# WA23 MFR# WA23 The WA23 is a heavy pneumatic indent crimp tool that is operated with the push of a button. It works with largesize contacts 8 through 0000 (AWG) and operates on standard 90-125 psi (5.4 – 8.16 BAR) shop air sources. This tool is portable and does not require an extra booster for large-size contacts; and, for added safety, it has a full cycle control system. The standard die assembly and positioner are easily interchangeable without the need for a special tool. –– M22520/23-01

EDMO#

MFR#

MIL P/N

USE

WA23 DIE ASSEMBLIES & POSITIONERS

WA23-5

WA23-9

WA23-2 WA23-3 WA23-4 WA23-5 WA23-6 WA23-7 WA23-9 WA23-10 WA23-11 WA23-13 WA23-14 WA23-15

WA23-2 WA23-3 WA23-4 WA23-5 WA23-6 WA23-7 WA23-9 WA23-10 WA23-11 WA23-13 WA23-14 WA23-15

M22520/23-02 M22520/23-03 M22520/23-04 M22520/23-05 M22520/23-06 M22520/23-07 M22520/23-09 M22520/23-10 M22520/23-11 M22520/23-13 M22520/23-14 M22520/23-15

die assembly 8 die assembly 6 die assembly 4 die assembly 1/0 die assembly 2/0 die assembly 4/0 positioner 8 positioner 6 positioner 4 positioner 1/0 positioner 1/0, 1/0N positioner 2/0, 2/0N

HYDRAULIC CRIMP TOOL DANIELS

EDMO# HD51 MFR# HD51 The HD51 medium duty hydraulic hand crimper is capable of applying 5.5 tons of die force and provides a larger die configuration that extends the range of crimping capabilities to 2/0 AWG conductors. In addition, it reduces the number of handle closures required to complete the crimp with its larger and more efficient hydraulic pump system. It is ruggedly constructed with lightweight materials and weighs in at only 4.6 pounds. –– Dimensions: 14 in / 4.6 lb –– Crimp force: 5.5 tons –– Automatic relief valve prevents over-compression –– Release lever for relaxing crimp pressure and opening dies –– 180° rotating head for ease in confined work areas –– Wire range: (HD51 and XHD5 models): #12 to #2/0 AWG in many power applications, 0.700 (17.78 mm) in coaxial hexagonal crimping –– Die sets sold separately

106

EDMO#

MFR#

SIZE

HD51 DOUBLE INDENT DIE SETS HD51-124N HD51-123N HD51-121N HD51-120N HD51-119N HD51-118N

1.800.235.3300 | edmo.com

HD51-124N HD51-123N HD51-121N HD51-120N HD51-119N HD51-118N

#2/0 #1/0 #2 #4 #6 #8

EDMO DISTRIBUTORS

Tooling

Crimp & Barrel Die Tool Sets MOLEX HAND CRIMP TOOL EDMO# W-HT-1919 MFR# W-HT-1919 Molex hand crimp tool that also cuts and strips wire and cuts bolts. 8.25 inches in length with a red handle.

cuts wire ranges: cuts bolts (sizes): crimps terminals:

14-24 AWG 4-40, 5-40, 8-32, 10-24, 10-32 .093-in pin diameter terminals, standard KK crimp; terminals for .156-in center KK housings, series; #1189/1190, series #1380/1381, series #2478

CRIMPMASTER CRIMP TOOLS EDMO#

MFR#

30-506

30-506

30-500

30-500

30-502

30-502

USAGE RG-58, RG-59/62AU, BNC/TNC 3-Piece hex type connectors (frame only) #22 to #10 AWG (.324mm - 5.261mm) insulated ring tongue terminals and splices (comes with 30-579 die set) RG-58 RG-59/62AU BNC/TNC 3-Piece hex type connectors (comes with 30-581 die set)

5

The Crimpmaster crimp tools provide consistent crimping and are equipped with interchangeable dies that are easily swapped out with a screwdriver. Cushioned-grip handles.

CRIMPMASTER DIE SETS Technicians can add instant versatility to crimp tools with these die sets. These sets are compatible with the 30-506 crimp tool frame and are easy to change out with a screwdriver. Provide consistent crimp. EDMO#

MFR#

30-572 30-579 30-587

30-572 30-579 30-587

30-591

30-591

30-599

30-599

USAGE 16-26 AWG (1.31 mm to 0.128 mm), miniature-insulated rings, spade, butt splices 10-22 AWG (.324 mm to 5.261 mm) insulated terminals/color coded nests RG-58, RG-174, RG-8218 for both 50 and 70 ohm cables (Hex 0.213 (5.41 mm), 0.178 (4.52 mm), 0.068 (1.73 mm), 0.042 (1.07 mm) Plenum and non-plenum thin wire cables RG-58 and 59 (Hex, 0.213 (5.41 mm), 0.190 (4.83 mm), 0.068 (1.73 mm), 0.042 (1.07 mm) 30-18 AWG (0.205 mm - 2.08 mm) open barrel pins and sockets

30-572

30-591

PRO-CRIMPER CRIMP TOOLS EDMO#

MFR#

USAGE

PRO-CRIMPER II 58495-1 58433-1 58448-2

58495-1 58433-1 584482

frame only includes die assembly 58445-1 RG-58/62/59 includes die assembly 58448-3 for sub-D pins and sockets

PRO-CRIMPER III The Pro-Crimper hand crimping tools are commercial grade tools that provide a wide range of crimping possibilities when paired with the appropriate die set (each die accommodates multiple terminal sizes). The crimp tool’s frame has a stationary jaw and handle, a moving jaw, moving handle, and ratchet adjustment wheel that ensures full contact crimping. The tool frame holds the die assembly with three crimping sections. –– Carbon steel construction with extra strength pivot pins –– Ergonomic, angled head for comfortable hand and wrist position –– Ratchet control with emergency ratchet release

EDMO DISTRIBUTORS

354940-1 58433-3 58501-1

3549401 584333 58501-1

frame only includes die assembly 58423-1 for RBY terminals frame only, for use with N connectors

PRO-CRIMPER II DIE ASSEMBLIES 58495-2

58495-2

for pins and sockets. Consists of crimping dies and a locator assembly with a wire anvil, and insulation anvil, wire crimper, and insulation crimper.

58435-1 58436-1

58435-1 58436-1

BNC/TNC/RG-58/59/62. Includes two ferrule crimp sections and two center contact crimp sections. The crimp sections are marked to identify the cable sizes used with the connectors.

58436-1

58495-2

PRO-CRIMPER III DIE ASSEMBLIES 220189-3 58423-1

220189-3 58423-1

for RG-58/141/142. for terminals and splices. Consists of an anvil and indenter; when closed, the dies form three crimping chambers. Dies are secured within the tool frame with screws.

91908-1 58485-1

919081 58485-1

for SMA series 50-Ohm RF connectors for N-type connectors

1.800.235.3300 | edmo.com

58423-1

91908-1

107

Tooling

Crimp & Barrel Die Tool Sets MOLEX CRIMP TOOL/14-24 AWG MOLEX

EDMO# 63811-1000 MFR# 63811-1000 Universal hand crimping tool with ergonomic, soft grip handles. For use with wire ranges 14-24 AWG (accepts material thicknesses of 0.15-0.40 mm and conductor barrel lengths of 2-3.5 mm.

MOLEX RATCHET CRIMPER

5

MOLEX

EDMO# 63811-6600 MFR# 63811-6600 The 63811-6600 hand crimp tool is a full-cycle ratcheting hand tool for use with KK® center crimp terminals, 18-30 AWG. This tool is ergonomically designed with soft handles and outstanding force ratio for easier handling. The frame is also equipped with a user-friendly terminal locator wire stop that holds terminals in the proper crimping position. –– IPC/WHMA-A-620 Class 2 and RoHS compliant

T HEAD CRIMP TOOL

EDMO# 59250 MFR# 59250 This T-Head crimping tool is capable of crimping PIDG insulation-restricting nylon terminals, PIDG terminals, and PIDG radiation-resistant terminals, 22-14 GA. The handles are color-coded to match the color-coding of the product to be applied. An insulation adjustment indicator controls the crimp height of the insulation barrel—it can be set at any of four positions corresponding to insulation diameter. Built-in ratchet control ensures complete crimping of the product and prevents the ratchet from releasing until after the handles are fully closed. Additionally, this tool is equipped with a locator, quick take-up trigger, and color-coding information.

ROUND BARREL CRIMPER EDMO# 35-465 MFR# 35-465

Crimp tool with a full cycle ratchet that provides an exact, 4-way indent crimp that meets MSS22520. High-grade steel construction. Crimps D-subminiature contacts for RS232 interface connectors, 20-26 AWG. –– 20-26 AWG –– 8 oz/6.5 in

CRIMPER/CUTTER/6 STRIP STATION

EDMO# 18E MFR# 18E The 18E is an all-purpose tool that strips and cuts wires, crimp terminals, and cut bolts. The stripper section strips: 22-20, 18, 16, 14, 12, & 10 AWG wire. Crimps insulated and non-insulated terminals in the following sizes: 22-14, 12-10 AWG. The bolt cutter section cuts the following size bolts: 4-40, 6-32, 8-32, and 10-32. Features Air-Pocket cushion grips. –– Length: 8.75 inches –– Crimps: 10-22 GA insulated or non-insulated –– Strips: 10-22 GA overall

STRATO-THERM CRIMP TOOL EDMO# 46988 MFR# 46988

Hand crimping tool used to crimp high-temperature and heat-resistant STRATO-THERM terminals and splices onto wire sizes 22 through 14 AWG. This tool has an indenter crimping jaw, an anvil crimping jaw, locator, two insulation crimping adjustment pins, and a CERTI-CRIMP hand tool ratchet. The corresponding wire size is marked on the backside of the tool.

ROTA-CRIMP HAND TOOLS

600850

601075-1 The Rota-Crimp hand tools work with large uninsulated SOLISTRAND and Tubular terminals and splices, as well as Cable Maker battery terminals and pre-insulated PLASTI-GRIP and TERMINYL terminals and splices wire sizes 8 through 4/0 AWG (see table for details). These tools have two fixed rotating crimping dies that are held in place by spring-loaded indexing pins. Each die is positioned using a spring-loaded die locator pin. –– Tool label indicates die settings to help operator match terminal and wire size –– Tubular steel handles with rubber grips –– Not approved for use in aircraft-related applications EDMO# 600850

1.800.235.3300 | edmo.com

STYLE

WIRE SIZE

600850

non-ratchet

8, 6, 4, 2 1/0, 2/0, 3/0, and 4/0 AWG stranded copper wire

non-ratchet ratchet

8, 6, 4, 2, and 1/0 AWG stranded copper wire

BANTAM ROTA-CRIMP 601075 601075-1

108

MFR#

ROTA-CRIMP

601075 601075-1

EDMO DISTRIBUTORS

Tooling

Wire & Cable Strippers CERTI-CRIMP II CRIMP TOOLS Certi-Crimp hand tools are designed for use with terminals, contacts and special wiring devices.

WIRE & CABLE STRIPPERS STRIPMASTER WIRE STRIPPER SERIES CUSTOM STRIPMASTER

EDMO# 91504-1 91512-1

MFR# 91504-1 91512-1

DESCRIPTION Certi-Crimp tool/CMNL 20-14 Certi-Crimp 2, SAHT CMNL 24-18

Static mat kit for use in soldering assembly areas. This mat is resistant to heat, chemicals, abrasion, and tearing and as such, is safe to use in soldering applications that involve flux and other chemicals. –– Includes snap kit and 15 ft common-point ground cord with dual 4 mm banana plugs

EDMO# 45-171 45-174 45-176 45-177 45-1610 45-1654 45-1987

MFR# 45-171 45-174 45-176 45-177 45-1610 45-1654 45-1987

ACCESSORIES

WIRE SIZES 16 – 26 AWG 16 – 26 AWG 10 – 14 AWG 16 – 26 AWG 16 – 26 AWG 16 – 26 AWG 16 – 26 AWG

5

STATIC MAT

The Custom Stripmaster wire strippers strip solid or stranded wire with durable die-type blades that allow for precision stripping. Each stripper is equipped with a grit pad and a counterbored hole sized to insulation and an inner stripping hole sized 45-174 for conductors. The counterbore hole acts as a collet, which compresses the insulation slightly to center the conductor, and prevents the blade-cutting surface from contacting the surface of the conductor. The ergonomically shaped comfort grip handles are fitted with replaceable grippers. USE Type EE M16878 (1000V) Type E M16878 (600V) Type E M16878 (600V) MIL-W-81044/12B Kynar® wire Lockheed CO1-1185C MIL-W-22759/32-46

DESCRIPTION

L5559 L5559 Replacement blade for 45-176 L5560 L5560 Replacement blade for 45-177 45-1610-1 45-1610-1 Replacement blade for 45-1610

STRIPMASTER WIRE STRIPPERS shipping weight: dimensions: dissipative top layer: conductive bottom layer: material: approvals:

EDMO# 66040 09070

MFR# 66040CE 127-008

3 lb 24 × 36 × 0.060 in 106 - 109 ohms Rtt 104 Rtt 2-layer rubber ANSI/ESD S20.20 and EIA-625

DESCRIPTION Static Mat elastic ground wrist band and 6 ft cord with alligator clip (for use with 66040)

The Stripmaster wire strippers have knifetype blades that require one-third less hand pressure for each strip. The stripper’s wire gripper holds the wire centered in the hole in order to reduce nicking, cutting, and fraying of the wire. Strips wire up to 7/8 in. 45-098 The Stripmaster Lite has knife-type blades and easily strips wire up to 7/8 in. The wire gripper holds the wire centered in the hole and helps to prevent nicking, cutting, and fraying the wire. This efficient tool uses spring-loaded tension and requires one third less hand pressure for each strip. Use with EDMO# L-9040, Replacement Blade for Stripmaster wire strippers EDMO#

Not finding what you need? If you don’t see the tool you need, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we’ll have it in stock.

EDMO DISTRIBUTORS

45-091 45-097 45-098

MFR# 45-091 45-097 45-098

WIRE SIZES #10 to #18 AWG #16 to #26 AWG #20 to #30 AWG

STRIPMASTER LITE WIRE STRIPPER 45-672

45-672

#24 to #30 AWG

ACCESSORIES

DESCRIPTION

L-4994

replacement blade for 45-097

L-4994

1.800.235.3300 | edmo.com

109

Tooling

Wire & Cable Strippers

5

TWISTRIP QUICK CHANGE WIRE STRIPPER The Quick Change Wire Stripper Tool Kit contains all of the essentials for wire stripping. The kit includes a Twistrip tool, a set of wire dies for use with M2750022TG2T14 type wire, and a pin punch removal tool. The included Twistrip tool uses a pair of interchangeable dies with cutting blades attached to a free-rotating core which make it possible to quickly and easily strip back the shielding of the twisted pair wire used in many avionics installations. The quick change mechanism built into the actuator arms makes installing the wire dies a fast process with no extra tools required (users can opt to use roll pins and the pin punch tool for semi-permanent installations). The Twistrip tool is an excellent alternative to using razor blades which are time consuming to use and prone to causing damage to the conductor (which may result in intermittent electrical shorts). –– Dies can be installed using the quick change mechanism built into the actuator arms that allows the dies to be installed without roll pins or extra tools; alternatively, users can opt to semi-permanently install the dies with the included roll pins and pin punch tool –– Kit includes: set of TDA-2-6042/5R-4 dies for use with M2750022TG2T14-type wire and a pinch punch removal/install tool EDMO# TSK-7000QC

MFR# TSK-7000QC

Quick Change Wire Stripper

ACCESSORIES

WIRE SIZES

2-6042/5R4

TDA-2-6042/5R-4

2-5439/4R4

TDA-2-5439/4R-4

3-6158/7R4

TDA-3-6158/7R-4

die set for 22 AWG/2 conductor wire M27500-22TG2T14 die set for 24 AWG/2 conductor wire M27500-24TG2T14 die set for 22 AWG, 3 conductor wire MS27500-22TG3T14

T®-STRIPPER SERIES WIRE STRIPPERS These multi-purpose tools strip and cut wire with form-ground, hardened, knife-type steel blades. A built-in wire cutter and looping holes makes cutting quick and efficient and the plier nose provides extra gripping strength. The spring-loaded, automatic opening makes manipulating the tool easier. The Reflex™ Premium version provides enhanced features including a curved, ergonomic handle for reduced wrist fatigue and textured, no-slip sleeves that cushion the thumb and fingers. –– Steel construction with a corrosion-resistant, black oxide finish –– Built-in wire cutter, wire looping holes, and plier nose –– Laser-etched wire gauge markings –– Spring-loaded automatic opening

EDMO# 45-121 45-416

DESCRIPTION

14-24 solid 16-26 stranded

The AMP crimp BNC coaxial cable stripper is compact and easy to use. It strips coaxial cable in one easy step with its replaceable blade cassette. Available in both single and dual versions. –– Three-step strip style –– Designed for BNC Mil-type dual crimp connectors –– Cable diameters from 0.10 – 0.30 EDMO#

MFR#

603995-1 603995-5

603995-1

TYPE

603995-1 603995-5

single dual

603996-1

replacement blade

ACCESSORIES 603996-1

3-STEP COAXIAL STRIPPER

EDMO# 45-520 MFR# 45-520 The 3-step coaxial stripper is an adjustable wire stripper for dual crimp BNC and TNC connectors. It strips braid from 0.240 inches and dielectric 0.240 inches. Use with EDMO# 45-522, Replacement Blade for 45-520

COAXIAL STRIPPERS This coaxial stripper has adjustable blade depth to help ensure nick-free strips. Works with twisted-pair wire, tightly wrapped stranded cables, CATV cable, CB antenna cable, SO, SJ, SJT, and similar flexible power cords. Three straight and one round blade included. Strips cable up to 1/8-inch.

45-162 45-163 45-164 45-165

MFR# 45-162 45-163 45-164 45-165

45-162

WIRE SIZES (IN) <1/8 1/8 – 7/32 1/4 – 9/16 3/16 – 5/16

Use with EDMO# L9225, Curved Replacement Blade for 45-162, 45-163, 45-165

RINGER CABLE STRIPPER 45-416

45-400

110

WIRE SIZES

T-6® T®-Stripper Reflex™ Premium T®-Stripper

BNC COAXIAL CABLE STRIPPERS

EDMO#

45-121

MFR# 45-121 45-416

1.800.235.3300 | edmo.com

45-402

45-403

EDMO DISTRIBUTORS

Tooling

Wire Cutters The Ringer™ Cable Stripper strips most non-round shielded cable including Kapton®, and Kynar®, Teflon®, Tefzel® and high-temperature insulated cable. The spring-loaded head provides even tension and strips cable up to 0.12 inches in diameter. The fixed blades are sized to insulation for accurate stripping (blades sold separately). Use with EDMO# K-6497, Replacement Blade for 45-400 EDMO# 45-400 45-402 45-403

MFR# 45-400 45-402 45-403

CABLE SIZES up to 0.12 in diameter 0.12 - 0.22 in diameter 0.12 - 0.22 in diameter

KNIFE SET XCELITE

EDMO# XNS-100 MFR# XNS-100 This two-piece light and medium-duty knife set is useful for a wide range of cutting needs. Includes two knives and 10 assorted blades.

knives: length:

XN100 and XN200 5-13/16 in / 148 mm 5-3/4 in / 146 mm light / medium duty assorted aluminum

5

jaw capacity: blade / point type: handle type:

XNS-100

WIRE CUTTERS FLUSH CUTTER

SAFETY WIRE PLIERS

EDMO# 12-500 MFR# 12-500 Flush Cutters are ideal for trimming wires or circuit boards with sharp, precision-ground cutting edges. Length: 5 inches

These reversible wire twisters have an automatic return function and a cushioned throat. Designed to be reversible for right-hand (clockwise action) or lefthand twists. The spring return automatically retracts the twist rod to make work faster and simpler. The cushioned throat catches clipped wire ends and prevents foreign object damage (FOD). –– Diamond grip jaw design –– Cushioned throat holds clipped wire—no FOD –– Reversible action for left and right twists –– Auto spring return EDMO# 25W 26W

MFR# 25W 26W

length:

HEAVY DUTY SHEAR CUTTER

LENGTH

EDMO# 1178M MFR# 1178M The Heavy Duty Shear Cutter is designed for use with IC pins, cables, and harnesses. –– Flush cuts soft wire up to 14 AWG (1.6 mm)

6 in 9 in

SAFETY WIRE PLIERS Three-in-one tool equipped with a standard pliers, safety wire twister, and wire cutter. Easily operable with one hand, the pliers are equipped with a locking grip and cutting edge. –– Tapered nose –– Hardened alloy steel, black oxide finish EDMO# WWP109 WWP109A

MFR# WWP109 WWP109A

LENGTH 6 in 9 in

SERRATED LONG REACH PLIERS EDMO #378M MFR# 378M Long reach pliers with serrated jaws and a thin profile for use in precision electronic assembly applications.

EDMO DISTRIBUTORS

5 in

length: blade length:

5-5/8 in 13/32 in

WWP109

LOW PROFILE SHEAR CUTTER EDMO #170M MFR# 170M This low profile shear cutter is a general purpose tool that provides superior blade bypass shear cutting action with reduced mechanical shock while in use and less required hand strength.

length: blade length:

5 in 1/2 in

1.800.235.3300 | edmo.com

111

Tooling Heat Guns

HEAT GUNS HL1910E HEAT GUN

5

STEINEL AMERICA, INC. The powerful HL 1910 E heat gun provides variable temperature and electronic thermocouple control for flexible use and maximum reliability. A reliable DuraTherm™ heating element ensures even heating with pinpoint reduction of heat output. –– Variable temperature and airflow control –– DuraTherm™ heating element –– Thermocouple controlled –– Reduction nozzles are approved for use on professional heat guns with electronic thermocouple control

HL1910E HEAT GUN KIT

120°F–1100°F (49°C-593°C) 3.6/10.6/17.6 CFM cool air stage 120F/3.6 CFM variable temperature 10.6 CFM variable temperature 17.6 CFM 1500 watts 120 VAC/60 Hz 12.5 industrial grade rubber, length: 6 ft 1.3 (33.02 mm) 10.2 × 3.5 × 8 2.05 lb (32.8 oz) weight: 2.53 lb (40.48 oz) dimensions: 11.4 × 9.5 × 3.7 in

3 stage switch: output: voltage: amps: power cord: nozzle diameter: dimensions: net weight: single sell pack:

EDMO# HL1910E 34838

MFR# 8419899585 34838

DESCRIPTION HL1910E heat gun only HL1910E classic heat gun kit

HG 2310 LCD HEAT GUN KIT STEINEL AMERICA, INC.

EDMO# 34875 MFR# 34875 The HG 2310 LCD Heat Gun Kit includes the HG 2310 LCD Programmable IntelliTemp™ heat gun, four nozzles, a heavy duty carrying case, an applications guide book, and an overhead security hanger. The included HG 2310 LCD heat gun has LOC Lockable Override Control™ for temperature and airflow output settings which provides even heat and a variable

112

temperature: airflow: switch: output: voltage: amps: power cord: nozzle diameter: dimensions: net weight: single sell pack:

Kit version includes: HG 1910 E variable heat gun, 9 mm, 14 mm, and 39 mm reduction nozzles, overhead hanger, aluminum carrying case, and application handbook.

temperature: airflow:

temperature range of 120 - 1200°F. Four customizable pre-set temperature/airflow programs make this heat gun a handy companion at the bench. –– Lockable override control –– Variable temperature and airflow control –– Duratherm™ heating element –– Double insulated –– Reduction nozzles are approved for use on professional heat guns with electronic thermocouple control Kit includes: HG 2310 LCD heat gun, 9 mm reflector, 14 mm reflector, 39 mm reflector, 9 mm reducer, overhead hanger, and a heavy duty case.

1.800.235.3300 | edmo.com

120°F–1200°F (49°C-649°C) 3.6-17.6 CFM cool air stage 120F/3.6 CFM cool air stage, variable temperature and airflow 1600 watts 120 VAC/60 Hz 12.5 industrial grade rubber, length: 6 ft 1.3 (33.02 mm) 10.2 × 3.5 × 8 2.2 lb (35.2 oz) weight: 2.72 lb (43.52 oz) dimensions: 11.4 × 9.5 × 3.7 in

HL2010E HEAT GUN STEINEL AMERICA, INC.

EDMO# HL2010E MFR# HL2010E The HL 2010 E heat gun is controlled by a microprocessor and has an LCD screen display that allows the user to select the temperature in 10°F increments. Heating is provided by a DuraTherm™ heating element that provides even heating. –– Microprocessor controlled –– DuraTherm™ heating element –– LCD display –– Ergonomically designed –– Reduction nozzles are approved for use on professional heat guns with electronic thermocouple control

temperature: airflow: 3 stage switch: output: voltage: amps: power cord: nozzle diameter: dimensions: net weight: single sell pack:

120°F–1150°F (49°C-621°C) 3.6/10.6/17.6 CFM cool air stage 120°F/3.6 CFM variable temperature 10.6 CFM variable temperature 17.6 CFM 1500 watts 120 VAC/60 Hz 12.5 industrial grade rubber, length: 6 ft 1.30 in (33.02 mm) 10.2 × 3.5 × 8 in 2.08 lb (33.28 oz) dimension: 11.4 × 9.5 × 3.7 in weight: 2.56 lb (40.96 oz)

EDMO DISTRIBUTORS

Tooling

Soldering Irons LIGHTWEIGHT HEAT GUN WITH NOZZLES WELLER

EDMO# 6966C MFR# 6966C Heat gun designed for assembly and repair applications in production plants, labs and service shops. Ideal for shrink tubing and vinyl/TFE epoxy curing, drying and cooling. Users can select temperature with the three-position switch (hot-off-cool). –– 3-wire grounded plug with a six-foot power cord –– UL and cUL listed

EDMO# 6966C

MFR# 6966C

13 oz 750° F – 800° F (399° C – 427° C) HOT – OFF – COOL 250 W 120 V 6 ft long; three-wire grounded

6959 6957 6958 6964

DESCRIPTION heat gun, dual temp

ACCESSORIES 1080 1082

1080W 1082W

reducer nozzle for 1095; stainless steel reflector nozzle for 1095; stainless steel

FLAMELESS HEAT SHRINK GUN

EDMO# MJ-600 MFR# MJ-600 This auto-ignition, flameless heat shrink gun can be powered by a normal cigarette lighter. Consists of a Piezo electronic ignition system with safety locking switch. Powered by an Iroda RC-30 refillable fuel cell (or any disposable cigarette lighter). It’s ideal for general heating and drying applications, bending and forming plastics and plastic laminates, PVC bending, preheating flux, installing heat shrink tubing without a flame, and installing heat shrink and solder filled connectors flamelessly. –– Heat temperature up to 1300°F (650°C)

DESCRIPTION heat gun w/ nozzles

ACCESSORIES 6959 6957 6958 6964

MFR# 1095

5

net weight: temperature range: 3 position switch: power consumption: voltage: power cord:

EDMO# 1095

baffle adapter; adapts 6966C nozzles to 1095 1.5 inch reflector for 6966C reducing baffle for 6966C precision reflector for 6966C

length: height: width: weight (without fuel): fuel: hours of nonstop burning: temperature:

1 in (25 mm) 4.5 in (115 mm) 3.2 in (80 mm) 95 g IRODA RC-30 refill cartridge or disposable lighter or similar product (excluding childproof versions) ≈ 20 min (per lighter) 1300°F (650°C)

1095 DUAL TEMP HEAT GUN UNGAR Ideal for applying heat shrink tubing, stripping paint, loosening floor tiles, removing adhesives, thawing pipes, and speeding up drying times, the Ungar heat gun is a dual-temperature, flameless heat-treating tool. It provides a wide temperature range between 1200°F and 790°F. Its durable polymer housing is impact resistant and includes a combination hanging ring and built-in stand. –– Dual temperature –– Uses: applying heat shrinking products, curing epoxy and softening adhesives, drying, thawing frozen pipes, softening and molding plastics, heating liquids, and stripping paint –– Dual temperature: 1200°F (1000w), 790°F (400W); 3-way switch: hi-off-low –– 3-wire grounded plug, 6’ power cord –– UL and cUL listed

wattage temperature range dimensions cord length

1000 W/400W 1200°F/790°F 1 lb 6 oz / 11 × 7 in 6 ft

EDMO DISTRIBUTORS

SOLDERING IRONS SOLDERING STATION This 60-watt, 120 V, temperature-controlled soldering station that uses a unique closed-loop method for controlling the maximum tip temperature while protecting temperature-sensitive components. The tip has a ferromagnetic temperature sensor to control the tip temperature without the need for adjustments. This device is ideal for the production, reworking, and repair of through hole and SMT boards.

ACCESSORIES FOR THE WTCPT PENCIL Solid copper with iron plating tip for the WTCPT soldering station and TC201T soldering pencil. Nickel and chromium construction behind the working surface. –– PTA7 is the replacement for a 700° F tip –– PTA8 is the replacement for an 800° F tip

1.800.235.3300 | edmo.com

113

Tooling

Soldering Irons

wattage: temperature range: voltage: supplied tip(s): compatible soldering pencil: iron stand:

EDMO# WTCPT

60 watts 600°F / 700°F / 800°F 120 V PTA7 TC201T PH1201ESD

MFR#

DESCRIPTION

WTCPT

soldering station

5

ACCESSORIES TC201T PTA7

TC201T PTA7

replacement soldering pencil screwdriver tip for WTCPT/0.062 × 0.62 in

PTA8 PTP8

PTA8 PTP8

screwdriver tip for WTCPT/0.062 × 0.62 in conical tip for TC201/0.031 × 0.012 in

–– Tip temperature offset capability –– Station temperature settings can be reset

wattage: temperature range: voltage: supplied tip(s): soldering: pencil(s): iron stand: temperature accuracy:

50 watts 350°F - 850°F 120 V / 24 V (WESD51), 240 V / 24 V (WESD51D) ETA PES51 PH50 +/-10°F

EDMO# WESD51 WESD51D

MFR#

VOLTAGE

WESD51 WESD51D

120 V / 24 V 240 V / 24 V

BUTANE SOLDERPRO IRON COMPLETE SOLDERING STATION

EDMO# WES51 MFR# WES51 This analog soldering station includes a pencil, stand, and sponge and is designed for continuous production soldering. The slim pencil is comfortable for the operator to hold and is equipped with an ETA tip. This station has various safety features including a wireless temperature lockout that prevents operators from raising the temperature past specified levels for the board or component and the iron is fitted with a non-burnable silicon rubber cord. –– Tip temperature offset capability –– UL and cUL listed and ESD safe to protect sensitive components

wattage: temperature range: voltage: supplied tip(s): soldering: pencil(s): iron stand: temperature accuracy:

50 watts 350°F - 850°F 120 V / 24 V ETA PES51 PH50 +/-10°F

DIGITAL SOLDERING STATION This digital soldering station is designed for continuous production soldering and comes with a power unit, soldering pencil, stand, and sponge. This microprocessor-controlled station has a digital LED display that allows the user to read both the temperature setting and the actual tip temperature. The slim pencil is comfortable for the operator to hold and is equipped with an ETA tip. For added safety, the iron is fitted with a non-burnable silicon rubber cord.

114

1.800.235.3300 | edmo.com

EDMO# PRO100K MFR# PRO-100K The SolderPro 100 is a butane-powered, portable, multi-function heat tool. This cordless tool provides a power range from 30 to 100 watts and is simple and safe to operate. This device is easily ignited with a Piezo electric ignition and within 15 seconds it’s ready to use. It heats with a catalytic burner and on a full tank of fuel, can last for up to 120 minutes of operation. –– The soldering iron tip temperature of 950°F is equivalent to that of an approximately 200-watt electric soldering iron –– The blow torch operates at temperatures of up to 2400°F, making it the perfect tool for heavy soldering and brazing –– Comfortable ribbed grip –– No electrical interference –– Includes a 60/40 rosin core, sponge, extra orifice, instruction manual, case, 2.4 mm chisel tip, reflector, and blow torch tip

length w/cap (w/soldering tip): weight (with fuel): approximate temperature:

gas container capacity: operating time (one gas filling):

EDMO# PRO100K PS-2

MFR# PRO100K PS-2

233 mm (9.2 in) [215 mm (8.5 in)] 142 g soldering tip: 250-500°C (480-950°F) torch: 1300°C (2400°F) hot knife: 200-350°C (400-600°F) heat blower: 250-500°C (480-950°F) 20 mL 120 mi at mid setting

VOLTAGE butane solder iron conical tip/3.2MM

EDMO DISTRIBUTORS

Tooling

Soldering Irons WLC100 SOLDERING IRON

CORDLESS SOLDERING IRON

WELLER

The “60” Pro Charge Soldering Iron is a cordless iron that recharges within 60 minutes. It comes complete with the iron, charging stand, Ni-Cd battery, standard fine tip #7545, and standard chisel tip #7577. This device provides up to 125 solder joints per charge during continuous use. The batter rapidly recharges when returned to the stand between uses. Iron switches to energy-saving trickle-charging rate when the battery is fully recharged.

EDMO# WLC-100 MFR# WLC100 This 40-watt, 120-volt soldering station is equipped with a cushioned foam grip and a replaceable heating element as well as a lightweight (SPG40) pencil iron with a guard for added safety. Includes a natural sponge tip cleaning pad. –– Replaces UTC-SS

TIPS FOR THE 7800 High-efficiency tips for the 7800 soldering iron. These tips reach soldering temperature in less than 10 seconds and reach a tip temperature of approximately 900°F.

5 – 40 watts 900°F 120 V ST3 SPG40 WCC105

EDMO# 7800

MFR# 7800

5

wattage: temperature range: voltage: supplied tip(s): compatible soldering pencil: iron stand:

DESCRIPTION cordless soldering iron

TIPS FOR 7800 7545 7566 7577 7579

7545 7566 7577 7579

1/16 (0.063) fine tip 1/64 (0.016) micro tip 5/32 (0.156) chisel tip 3/32 (0.094) beveled tip

TIPS FOR SOLDERING PENCILS Tips for soldering pencils available in conical, long conical, and screwdriver types. Each tip has a sensor hole in the base of the tip that’s fitted with a stainless steel liner that prevents the tip from seizing to the sensor. EDMO#

MFR#

DIMENSIONS (IN)

TIP WIDTH/THICKNESS (IN)

REACH (IN)

TIP STYLE

FITS TOOLS: EC1201A, EC1204A, PES50, PES51 & WCC101 ETA ETB ETJ ETP ETS ETT

ETA ETB ETJ ETP ETS ETT

0.062 × 0.032 × 0.625 0.093 × 0.02 × 0.625 0.031 × 0.012 × 1 0.031 × 0.012 × 0.625 0.015 × 0.000 × 1.00 0.024 × 0.036 × 0.625

0.062/0.032 0.093/0.02 0.31/0.012 0.031/0.012 0.015/not measured 0.024 × 0.036

0.625 0.625 1 0.625 1 0.625

screwdriver screwdriver long screwdriver conical long conical conical

0.062/0.032 0.093/0.02 0.125/0.027 1.87/0.025 0.031/not measured 0.031/0.019 0.031/0.012 0.062/0.044

0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75

screwdriver screwdriver screwdriver screwdriver single flat screwdriver conical narrow screwdriver

ETA ETB

FITS TOOLS: WP25, WP30, WP35 & WLC100 ST1 ST2 ST3 ST4 ST5 ST6 ST7 ST8

ST1 ST2 ST3 ST4 ST5 ST6 ST7 ST8

0.063 × 0.75 0.093 × 0.75 0.125 × 0.75 0.187 × 0.75 0.031 × 0.75 0.031 × 0.75 0.031 × 0.75 0.062 × 0.750

ST1 ST6 ST7

Call for additional sizes/styles.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

115

Tooling

Hex & Spline Wrenches

HEX & SPLINE WRENCHES

DESOLDERING PUMPS COOPER TOOLS Cooper tools desoldering pumps. –– Designed with a desoldering bulb –– facilitates accurate printed circuit repair and cleaning –– May be used with a soldering iron

GOLD BAND SPLINE WRENCH COLOR-CODED KIT EDMO# CSB-33111 MFR# CSB-33111 Bristol spline wrench kit includes nine short, L-key style wrenches (gold band).

5

7874B EDMO# 7874b 7880

MFR# 7874B 7880

7880

VOLTAGE anti-static desoldering pump manual desoldering pump

EDMO#

MFR#

COLOR

LENGTHS (IN)

DIA. (IN)

COMP. SET SCREWS

SHORT LONG FLUTES - 4 CS-033-4 CS-048-4 CS-069-4 CS-076-4

SPONGE

EDMO# TC205 MFR# TC205 Replacement sponge for the following Weller PH-series iron stands: PH50, PH1201ESD, PH1201FE, PH1301ESD, PH1503.

CS-033-4 CS-048-4 CS-069-4 CS-076-4

#1 brown #2 red #5 green #7 violet

0.218 0.344 0.562 0.562

1.218 1.218 1.75 1.75

0.033 0.48 0.069 0.076

#1 #2, 3 #5 #6

#3 orange #4 yellow #6 blue #8 gray #10 white

0.218 0.531 0.562 0.609 0.656

1.218 1.656 1.75 1.875 2

0.048 0.060 0.072 0.096 0.111

#2, 3 #4 #5, 6 #8 #10

FLUTES - 6 CS-048-6 CS-060-6 CS-072-6 CS-096-6 CS-111-6

CS-048-6 CS-060-6 CS-072-6 CS-096-6 CS-111-6

CHEM-WIK ROSIN SD DESOLDERING BRAID Chem-Wik® Desoldering Braid ensures fast and safe desoldering. The ultra-pure, oxygen free copper braid quickly and completely removes solder from circuit boards and components. Its fast-wicking action protects components from harmful heat damage. PermaPak™ Barrier Packaging ensures ultimate braid freshness and speed by sealing out harmful effects of the environment and protecting against oxidation. –– Reduces the risk of damage associated with static electricity –– Coated with noncorrosive ultra high purity type R rosin flux –– 5 ft lengths –– MIL-F-14256F, Type R; MIL-STD-2000A; MIL-B-81705C ; NASA NHB5300.4(3A) ; NASA SP-5002 ; NASA NPC200-4 ; IPC SF-818; DOD Handbook 263; DOD Standard 1686; BELLCORE TRNWT-00078 –– Static Dissipative packaging is available on all 5 foot bobbins. The static dissipative bobbins qualify as electrostatic discharge protective per DOD Standard 1686 and DOD Handbook 263. Meets the static delay rate provision of MIL-B-81705C

SPLINE WRENCH KIT

EDMO# SS-508 MFR# SS-508 Spline wrench for radio and electronics use in aviation and industrial applications. Includes nine short-arm L-keys, #1 through #10; refer to the table at right for the kit contents.

EDMO#

MFR#

LENGTHS (IN)

DIA. (IN)

COMP. SET SCREWS

SHORT

LONG

0.218 0.344 0.562 0.562

1.218 1.218 1.750 1.750

0.033 0.048 0.069 0.076

#1 #2, 3 #5 #6

0.344 0.531 0.562 0.609 0.656

1.218 1.656 1.750 1.875 2.000

0.048 0.060 0.072 0.096 0.111

#2, 3 #4 #5, 6 #8 #10

FLUTES - 4 S-033-4 S-048-4 S-069-4 S-076-4

S-033-4 S-048-4 S-069-4 S-076-4

FLUTES - 6 EDMO# 2-5l 5-5l 7-5l 10-5l

116

MFR# 2-5L 5-5L 7-5L 10-5L

SIZE 0.030 0.050 0.075 0.100

APPLICATION micro-circuits small pads medium pads large pads

1.800.235.3300 | edmo.com

S-048-6 S-060-6 S-072-6 S-096-6 S-111-6

S-048-6 S-060-6 S-072-6 S-096-6 S-111-6

EDMO DISTRIBUTORS

Tooling

Hex & Spline Wrenches COMPACT BRISTOL SPLINE SET

MFR# 991 99X5 99PSE 9961 9962 9963

DESCRIPTION

MFR#

regular handle extension blade plastic case 0.048 in 0.060 in 0.069 in

9964 9965 9966 9967 9968 9969

DESCRIPTION 0.072 in 0.076 in 0.096 in 0.111 in 0.145 in 0.183 in

SILVER BAND HEX WRENCH COLOR-CODED KIT

MFR#

COLOR

LENGTHS (IN) SHORT

CH-028 CH-035 CH-050 CH-116 CH-564 CH-332 CH-764 CH-18 CH-964

H-028 H-035 H-050 H-116 H-564 H-332 H-764 H-18 H-964

#1 brown #2 red #3 orange #4 yellow #5 green #6 blue #7 violet #8 gray #9 white

7/32 11/32 17/32 9/16 39/64 21/32 45/64 3/4 51/64

HEX WRENCH KIT EDMO# HS-206 MFR# HS-206 Set of six, short hex wrenches for use in military, commercial radio and avionic applications.

EDMO DISTRIBUTORS

CH-028 CH-035 CH-050 CH-116 CH-564 CH-332

MFR# H-028 H-035 H-050 H-116 H-564 H-332

LENGTHS (IN) SHORT

LONG

7/32 11/32 17/32 9/16 39/64 21/32

1-7/32 1-7/32 1-21/32 1-3/4 1-7/8 2

WIDTH ACROSS FLATS 0.028 0.035 0.050 1/16 5/64 3/32

HEX SCREWDRIVER SET - 9 PIECE XCELITE

EDMO# PS-89 MFR# PS-89 Save space at the bench with this 9-piece hex socket screwdriver set that includes a black, “piggyback” torque amplifier handle and is packaged in a clear plastic case. Each tool has a color-coded handle. Kit includes: nine (9) tools: one torque amplifier and eight (8) screwdrivers sized: 0.028, 0.035, 0.050, 1/16, 5/64, 3/32, 7/64, 1/8.

COMPACT ALLEN HEX SET

EDMO# CHB-28964 MFR# CHB-28964 Bristol hex wrench kit containing nine short, L-key style wrenches (silver band).

EDMO#

EDMO#

5

EDMO# 99-PS-60 MFR# 99-PS-60 Series 99® bristol spline driver set. This set includes a handle, extension blade, nine (9) multi-spline blades, and a plastic storage case. All Series 99® blades are interchangeable with Series 99® handles. See table below for kit contents. –– High quality steel blades, hardened and tempered for optimum performance –– Plastic handles are equipped with a patented spring device that holds blades securely while allowing quick removal

FLATS WIDTH / COMP. SCREWS

LONG 1-7/32 0.028 / #0 set screw 1-7/32 0.035 / # 1, 2 set screw 1-21/32 0.050 / #3, 4 set screw 1-3/4 1/16 / #5, 6 set screw 1-7/8 5/64 / #8 set screw 2 3/32 / #10 set screw 2/18 7/64 / #6 cap screw 2-1/4 1/8 / 1/4 set screw 2-3/8 9/64 / #8 cap screw

EDMO# 99-PS-40 MFR# 99PS40 The 99PS40 is an 11-piece compact Allen® hex socket screwdriver set. This kit comes arranged in a clear plastic case. Kit includes: one 4-inch handle, (1) 4-inch extension, and nine (9) screwdrivers sized: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16.

BALLPOINT ALLEN HEX SET EDMO# 99-PS-40BP MFR# 99-PS-40BP The 99-PS-40BP set is an 11-piece ballpoint Allen® hex socket screwdriver set that has a unique ballpoint tip for tightening and removing Allen socket screws. This set includes nine (9) blades, four inches long, 99X5 extension, and a regular 991 handle. Includes one (1) handle, one (1) extension and nine (9) wrenches sizes: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16.

1.800.235.3300 | edmo.com

117

Tooling Drivers

DRIVERS

CRESCENT TOOL KIT SERIES

NUTDRIVER COMPACT SET - 11 PIECE XCELITE

5

EDMO# PS-120 MFR# PS-120

The Crescent tool kits contain all the tools needed for most industrial applications; some kits include 1/4”, 3/8”, and 1/2” quick-release ratcheting drives, with a wide selection of standard and deep sockets in the most common SAE and metric sizes. All tools are industrial-quality, meeting stringent ANSI and ASME specifications. All come in durable storage cases that have raised-letter ID for each tool location, so they’ll stay organized.

This 11-piece compact convertible nut kit allows users to complete jobs with fewer tools while saving bench space. This kit contains 11 tools including a black, “piggyback” torque amplifier handle and is packaged in a clear plastic case. Each tool has a color-coded handle. –– Includes 11 tools; 10 drivers and one torque amplifier

REGULAR TIP SCREWDRIVERS XCELITE

R-186 Regular round blade screwdriver with an AISI 6150 chrome vanadium steel blade; plated for protection. EDMO#

MFR#

BLADE STYLE

BLADE/ POINT SIZE / DIAMETER

R-1810

R-1810

slotted

1/8 in / 3.17 mm

R-186

R-186

slotted

1/8 in / 3.17 mm

R-188

R-188

slotted

1/8 in / 3.17 mm

WORKING LENGTH / OVERALL LENGTH

CTK30SET

CTK70MP

Includes: 3/8-inch drive ratchet handle; 6-inch and 3-inch extension; Metric sockets: 9, 10, 12, 13, 14, 15, 17, 19; SAE sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4; Deep Metric sockets: 12, 13, 14, 16, 17; Deep SAE sockets: 7/16 ,1/2, 9/16, 5/8, 11/16, 13/16 spark plug socket (30 pieces total

Includes: 1/4-inch and 3/8-inch quick-release ratcheting drivers; 32 SAE and metric sockets; 12 SAE and metric combination wrenches, plus 24 assorted tools (70 pieces total)

10 in / 254 mm 12-5/8 in / 321 mm 6 in / 152 mm 8-5/8 in / 219 mm 6 in / 152 mm 8-5/8 in / 219 mm

EXTRA LONG SCREWDRIVERS XCELITE

X-1010 Extra long Phillips® type screwdrivers with plated AISI 6150 chrome vanadium steel blades. EDMO#

118

MFR#

BLADE STYLE

BLADE/ POINT SIZE / DIAMETER

x-1010

x-1010

Phillips

#1 / 3/16 in

x-1020

x-1020

Phillips

#2 / 1/4 in

WORKING LENGTH / OVERALL LENGTH

CTK148MP Includes: 1/4-inch, 3/8-inch, and 1/2-inch quick-release ratcheting drives; wide selection of standard and deep sockets in most common SAE and metric sizes; 72-tooth ratchet drives with 5° swing, perfect in tight spaces; 3/8-inch drive 12-point sockets (148 pieces total)

10 in / 254 mm 13-5/8 in / 346 mm 10 in / 254 mm 14-1/8 in / 359 mm

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Tooling Vises

VISES MINI TABLE TOP VISE PANAVISE PRODUCTS, INC

HEAVY WEIGHT TABLETOP VISE PANAVISE PRODUCTS, INC

EDMO# MODEL350 MFR# MODEL350 The Heavy Weight Table Top Vise is a multi-purpose work center designed to hold larger, heavy objects. It’s exceptionally stable with self-centering, extra-wide opening jaws that open to 9 inches and ribbed neoprene jaw pads that prevent damage to objects. The dual-purpose parts tray base holds extra tools and components while providing added stability. Head movement is managed with a single knob that controls three planes of movement, 90° tilt, 360° turn, and 360° rotation. –– Self-centering, extra-wide jaws open a full nine inches and hold heavy objects by centering weight over the base –– The 8.5-inch diameter parts tray base mount provides added stability and has six individual trays to hold small parts and tools (includes six non-marring anti-skid pads) –– Ribbed, neoprene jaw pads provide added grip; when the pads are reversed they form a wide “V” shape that holds cylindrical objects (1.875 × 1.5 inches) –– Single knob controls head movement through three planes: 90° tilt, 360° turn, and 360° rotation –– Double-action jaws open and close quickly or can be reversed to provide “zero” closure –– Base accepts all 300-series heads and any5/8-inch diameter shaft –– Dimensions: 7.875 in / 5 lb

Not finding what you need? EDMO maintains a large inventory of tools that is constantly being updated. If you don’t see what you need here, it’s likely we have it, or we can order it in for you. As always, give us a call at 1.800.235.3300 for parts and pricing.

EDMO DISTRIBUTORS

PANAVISE PRODUCTS, INC

EDMO# MODEL381 MFR# MODEL381 The Portable Vacuum Table Top Vise is exceptionally easy to transport to different workstations. Its vacuum base quickly attaches to any smooth, non-porous flat surface with the flip of a lever. A single knob controls three planes of movement, 90° tilt, 360° turn, and 360° rotation.

WIDE OPENING HEAD TABLE VISE PANAVISE PRODUCTS, INC

EDMO# MODEL396 MFR# MODEL396 Designed for larger projects, the Wide Opening Head Table Vise open up to a generous six inches. The ribbed, neoprene jaw pads are 1.875 × 1.5 inches wide and provide solid gripping power for flat-sided objects—to hold cylindrical objects, simply reverse the pads so that they form a wide “V” shape.

5

EDMO# MODEL201 MFR# MODEL201 The Mini Table Top Vise holds electronic and other small components securely in place with grooved jaws of thermal composite plastic. A single knob controls the head movement through three planes: 210° tilt, 360° turn, and 360° rotation. A fine/ coarse adjustment knob controls the jaw pressure for more delicate work. –– Three planes of head movement: 210° tilt, 360° turn, and 360° rotation –– Fine/coarse adjustment knob –– Grooved jaws are perfect for small objects with reinforced thermal composite plastic with a continuous heat tolerance of 350°F (177°C), intermittent heat up to 450°F (204°C) –– Jaws are 2 × 1 inches wide and open up to 2.875 inches –– Neoprene jaw pads are available for holding delicate items –– Base features 4.3125 bolt circle countersunk for three 1/4-inch flat head screws (not included); compatible with all PanaVise base mounts –– Dimensions: 6.75 in / 1.2 lb

PORTABLE VACUUM TABLE TOP VISE

DOUBLE HAND HOLDER

EDMO# 12-051 MFR# 12-051 The Double Hand Holder keeps objects in place at the work bench while freeing up the operator’s hands. Thumbscrews lock the object into place while the stand’s six ball joints allow the objects to be moved into the appropriate position for ease of use. Smaller objects can be secured by the two alligator clips. Heavy base for added stability.

ROUND DRILL JIG

EDMO# DJ-1 MFR# FAP 06 This simple tool comes with a 2-1/4-inch and 3-1/8-inch centering disc and clamp bar. Once the instrument hole has been made, clamp the tool in place and either spot drill or drill through the four holes for accurate instrument mounting. Constructed with hardened steel for improved longevity.

KWIK STEPPER DRILL BIT

EDMO# 34403 MFR# 50344030 The Kwick Stepper Drill Bit has a unique split-tip design that penetrates through steel faster than similar bits while resisting walking or skidding—even on round surfaces—with balanced, double-flute construction that requires less pressure during use. –– Capacity: cut up through 3/8 in (9.5 mm), maximum material thickness: 10 GA (3.5 mm) –– Overall length: 3-9/16 in (90.5 mm) –– Drills through steel, copper, brass, aluminum, wood, plastic, and laminates –– Hole size: 13/16 in (4.800 mm), 1/4 in (6.400 mm), 5/16 in (7.900 mm), 3/8 in (9.500 mm), 7/16 in (11.100 mm), 1/2 in (12.700 mm),9/16 in (14.300 mm), 5/8 in (15.900 mm), 11/16 in (17.500 mm), 3/4 in (19.100 mm), 13/16 in (20.600 mm)

1.800.235.3300 | edmo.com

119

Tooling

Cable Tie Tools ROUND HOLE PUNCHES

EDMO#

These round standard metal punch units consist of a punch, die, and draw stud. They can be used with battery-powered, hydraulic, ratchet, or manual drivers and when properly assembled through pilot holes, they make clean, fast, and accurate holes. –– Standard round knockout EDMO#

MFR#

LENGTH/ WEIGHT

HP-32 HP-48 FP-1

5

50206702

1 in / 0.5 lb

REPLACEMENT PART

87AV UPC 03986 Punch, 35164 UPC 35164 Die And 00042 UPC 00042 Draw Stud

16 GAUGE CAPACITY (MILD STEEL) 730BB1-1/4

730BB1-1/4

1-1/4 in / 0.7 lb

117AV UPC 04002 Punch, 118AV UPC 04003 Die And 00042 UPC 00042 Draw Stud

10 GAUGE CAPACITY (MILD STEEL) 730BB1-3/8

730BB1-3/8

1-3/8 in / 1.1 lb

730BB-2

730BB-2

2 in / 1.9 lb

730BB2-1/4

730BB-2-1/4 2-1/4 in / 2.6 lb

730TBB

730TBB

3-1/8 in / 6 lb

3205AV UPC 04734 Punch, 3206AV UPC 04735 Die And 249AVBB UPC 04040 Draw Stud 1756AV UPC 04232 Punch, 35161UPC 35161 Die And 304AVBB UPC04042 Draw Stud 437AV UPC 04058 Punch, 438AV UPC 04059 Die And 304AVBB UPC 04042 Draw Stud 1798AV UPC 06363 Punch, 1797AV UPC 06362 Die, 1434AV UPC 04188 Draw Stud And 1433AVBB UPC04187 Ball Bearing Nut

ADD-A-NUT KIT ADD-A-NUT

EDMO# HP-2 MFR# HP-2 Add-A-Nut makes installing Riv Nuts and Nut Serts an easy task. The HP-2 kit comes complete with all the necessary items needed to install Riv Nuts and Nut Serts sizes 6-32, 8-32, and 10-32 in a high-impact plastic storage case. Replacement parts for the HP-2 are available.

EDMO# HP-2

MFR# HP-2

DESCRIPTION Add-A-Nut Kit

120

HP-21A HP-22 HP-23 HP-24 HP-25 HP-26 HP-30A HP-30B HP-30C HP-30D

handle collect case 6-32 puller 8-32 puller 10-32 puller 4-40 puller 4-40 nosepiece 6-32 nosepiece 8-32 nosepiece 10-32 nose piece

----

CABLE TIE TOOLS EVO 7 CABLE TIE GUN HELLERMANNTYTON CORP

EDMO# EVO7 MFR# 110-70083 The EVO 7 Cable Tie cutter uses tension/lock/cut (TLC) technology to provide precise cable tie cutting without creating the protruded cut edges caused by conventional cable tie cutters that stretch the tie as they cut. The EVO 7 provides adjustable tensioning with a locking mechanism to keep the tension setting in place—ensuring a flush cut, each and every time. This advanced cutting technology is paired with a user-tested ergonomic design with soft-grip, non-slip, air cushioning on the handle and trigger for the utmost in user comfort. –– TLC technology allows the user to adjust the tension, lock it into place, and cut; all cutting energy is directed into driving the blade through the tie for a clean, flush cut without jarring to the hand or arm –– Provides a wide tension range with 33 precisely calibrated, easyto-read pre-set tension settings that allow for precise cable tie application –– Tension settings can be dialed in using the tension knob and locked into place with the thumb lock –– Ergonomic design includes a contoured handle with soft-grip, non-slip material and an integrated air cushion that conforms to the user’s hand for improved comfort –– Contoured, full-length trigger has individual finger grips for multiple hand sizes and the same soft-grip material used in the handle –– One-way blade installation for fast, on-site blade replacement –– Narrow nose fits into tight places –– Integrated hanger hook allows for easy storage and accessibility –– Model 110-70083 is intended for use with 18-80 lb cable ties

TWIST CUT CABLE TIE GUN

ACCESSORIES HP-21A HP-22 HP-23 HP-24 HP-25 HP-26 HP-30A HP-30B HP-30C HP-30D

DESCRIPTION spring retaining pin nosepiece wrench fulcrum assembly

730BB-1

14 GAUGE CAPACITY (MILD STEEL) 730BB-1

MFR# HP-32 HP-48 FP-1

riv-nut sizes --6-32 8-32 10-32 4-40 4-40 6-32 8-32 10-32

1.800.235.3300 | edmo.com

HELLERMANNTYTON CORP EDMO# TWT-1 MFR# TWT-1 The Twist Cut Cable Tie Gun is an efficient and economically priced mechanical twist tool that is light and small enough to fit into a pocket.

EDMO DISTRIBUTORS

Tooling

Cable Tie Tools CABLE TIE CUTTER

EDMO# MG-1300 MFR# MG-1300 Cable tie cutter with two safety guards to protect the user’s hands. The guards slide behind the cable tie strap for simple removal without the risk of damaging bundled cables or wires. Ergonomic, cushioned grips.

WIRE SPOON THREADER

5

EDMO# MDA-3792 MFR# MDA-3792,35250 Wire spoon threads wires into already tied harnesses. –– 300 Series stainless steel construction –– Made in America for superior quality

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY. EDMO carries a wide range of products, including custom options, so if you’re not finding what you need, give us a call at 1.800.235.3300 or visit edmo.com. We’re constantly updating our inventory so there’s a good chance we will have what you’re looking for.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

121

Chemicals & Cleaners

Cleaners - Electrical.......................................................................................... 124 Corrosion Inhibitors........................................................................................... 125

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

123

Chemicals & Cleaners Cleaners - Electrical

CLEANERS - ELECTRICAL

6

ICLOTH® AVIONICS WIPES iCloth® Avionics wipes are individually wrapped, anti-static cleaning wipes that keep electronics display surfaces like glass panel avionics and tablets clean and free of dust, grime, and fingerprints. iCloth wipes are made of aviation-grade Sontara®, a super-soft fabric designed to clean glass surfaces without leaving any residue or streaks. Sontara® is made using a process called hydro-entangling. Pulp and polyester fibers are tangled together by pounding them with high-pressure water jets. This process removes all contaminants and excess lint, leaving a hypoallergenic cloth that is free of any binders or glues that can break down during cleaning and leave streaks. Each wipe is individually packaged to preserve product quality and to allow for easy storage. –– Crafted with Sontara®, a super soft aerospace-grade fabric that cleans glass surfaces without leaving scratches or streaks –– Removes dust, smudges, fingerprints and grime and provides an anti-static finish –– Individually wrapped wipes –– Safe for avionics and meets the requirements set by Air Canada, USAF, US Navy, Boeing, Bombardier, Japan Defense Agency, and others

weight: dimensions: cleaning formulation: cleaning formulation approval: fabric approvals:

EDMO# ICA24 ICA100 ICA500

124

MFR# iCA24 iCA100 iCA500

0.16 oz (single packet) 5.25 × 7.25 in (unfolded wipe) pre-moistened with proprietary water-based liquid formula containing purified water, isopropyl alcohol, and cleaning agents Boeing D6-7127 Revision P (Commercial Transport Aircraft Interiors) Aerospace Material Specification AMS 3819B, Class 2, Grade A Boeing Material Specification BMS 15-5F, Class A Bombardier Aerospace [based on AMS-3819, BMS-15-5F, and DMS-1820E] Cessna Aircraft Company CSFS039 [based on AMS-3819B] Douglas Material Specifications DMS 1820E Japan Defense Agency – approved based on USAF T.O. 1-1-8 Pratt & Whitney GA100-11E [approved for use in production of jet engines] U.S. Air Force T.O. 1-1-8 US Navy [based on AMS-3819B compliance] Air Canada AC 99904A1480

QUANTITY box of 24 box of 100 box of 500

1.800.235.3300 | edmo.com

CLEANER FOR CRT SCREENS/EFIS EDMO# CSP20 MFR# CSP20 Screen Prep Presaturated wipes are a convenient cleaning and static control system for use on monitor. This two-part system is excellent for use on computer display screens, scope and dial faces, and glass and plastic surfaces of instruments. These wipes are safe on plastics and are ideal for cleaning sensitive surfaces. Screen Prep™ provides a static–dissipative treatment to the surface to control static–generated contamination. Screen Prep™ removes dust, fingerprint oils and other vision-inhibiting contaminants, and leaves no residue.

COTTON-TIP SWABS 100 PACK

EDMO# CT200 MFR# CT200 The Cottontips™ Swab consists of cotton fibers that are tightly wrapped around a wooden handle (the fibers are especially tight to prevent residual cotton lint). These swabs have excellent absorbency, as well as high strength, especially when saturated with water. This swab is designed for cleaning applications where absorbency is critical. –– Tightly wrapped head construction –– High strength, durable head for rigorous cleaning –– Low lint production –– High absorbency capacity and rate –– Good solvent compatibility –– 100 swabs/bag

ULTRAJET DUSTER/CFC FREE

EDMO# ES1015 MFR# ES1015 Ultrajet® 70 is general-purpose duster for electronic applications. It removes dirt, dust, oxide particles and other airborne particles instantly, and can be used to facilitate the accelerated drying of solvent cleaners. –– Safe on plastics –– Nonflammable –– Xtra cleaning strength –– Ozone safe –– Filtered to 0.2 microns –– 100% ultra-pure HFC-134a—leaves no residue –– 10 oz / 283 g aerosol

FLUX-OFF/CFC FREE

EDMO# ES1035 MFR# ES1035 Flux-Off ® Flux Remover removes all types of rosin (types R, RA, and RMA), no-clean, water soluble, and synthetic (type SA) flux. –– Safe on plastics –– Flammable –– Ozone safe –– Dries fast –– Leaves no residue –– 10 oz / 283 g aerosol

EDMO DISTRIBUTORS

Chemicals & Cleaners Corrosion Inhibitors

FREEZE-IT/CFC FREE

EDMO# ES1051 MFR# ES1051 Freez-It® Antistatic spray is a high-performance, pinpoint-accurate freeze spray that safely cools individual static-sensitive components. –– Safe on plastics –– Nonflammable –– Ozone safe –– Pinpoint spray isolates individual components without freezing surrounding areas –– Antistatic formulation is ideal for use on static sensitive components

REJEX

EDMO# 61002 MFR# CTC61002 RejeX is a thin-film polymer coating, used instead of wax or polish, to provide a durable, high-gloss protective finish for vehicles of all types. Entirely synthetic, RejeX’s protective characteristics exceed those of traditional wax products. It is highly resistant to chemicals, detergents, acids and UV, which deteriorate paint over time. RejeX does not contain the free silicone oils found in similar products that are known to contaminate paint and cause problems when repainting. –– 16 oz bottle

ELECTRO-WASH/CFC FREE

6

EDMO# ES1210 MFR# ES1210 Electro-Wash PX is an extra-strength cleaner and degreaser that’s safe for use on plastics. It removes oils and hydraulic fluids from mechanical assemblies, cleans handling soils from circuitry before reassembly, removes grease from assembly lines, and cleans fiber optic connectors. –– Safe on plastics –– Flammable –– Xtra cleaning strength –– Ozone safe –– Dries fast –– Leaves no residue –– Removes organic and ionic soils –– Liquid may be used in cold dip and rinsing applications –– 12.5 oz / 141 g aerosol

CORROSION INHIBITORS CORROSIONX INHIBITOR CorrosionX Aviation uses Fluid Thin Film Coating Technology to displace moisture, stop corrosion instantly, and provide long-lasting protection. This product is a lubricant and a protectant—not a sealant—it does not contain wax, tar, silicone, or solids and does not leave sticky or gummy residue behind; instead, it uses polar bonding, which means it clings to the metal like a magnet and resists being 90102 washed away. The film naturally creeps and spreads until it reaches a minimum thickness of 0.0003 inches. –– Only 8.6% volatile organic content (VOC); much less than many similar products –– CorrosionX Aviation (80102) is qualified under MIL-PRF-81309F, Type II for corrosion prevention and control on airframes (may also be used for general-purpose applications as well) –– 16 oz aerosol EDMO# 90102 80102

MFR# 90102 CTC80102

DESCRIPTION CorrosionX General/Red Can/16 oz CorrosionX Aviation/Blue Can/16 oz

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

125

Antennas

VHF Antennas.................................................................................................... 128 VHF Combo Antennas....................................................................................... 136 Navigation Antennas......................................................................................... 139 Towel Bar/VOR/LOC/GS Antennas................................................................... 145 DME Transponder Antennas............................................................................. 147 Couplers & Diplexers......................................................................................... 151 Marker Beacon Antennas.................................................................................. 156 Glide Slope Antennas........................................................................................ 158 GPS, XM & Iridium Antennas............................................................................ 159 Radio Altimeter Antennas.................................................................................. 164 FM Antennas..................................................................................................... 165 UHF L Band Radiophone Antennas.................................................................. 167 VHF Base Station & Vehicle Antennas.............................................................. 171 Antenna Sealing Supplies................................................................................. 172

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

127

Antennas

VHF Antennas

VHF ANTENNAS CI-109 VHF WHIP/118 - 137 MHZ COMANT

7

EDMO# CI-109 MFR# CI-109 The CI-109 is a robust whip antenna that has a tapered glass laminate housing and die-cast aluminum base. It matches the style of communication antennas used on 1968-72 single engine Cessnas. Due to its robust design, it is often used on light helicopters.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

9.6 oz 18.5625 in 118 – 137 MHz 2.5:1 maximum die-cast housing / fiberglass polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d four-hole external

CI-175 VHF WHIP/118 - 137 MHZ COMANT

EDMO# CI-175 MFR# CI-175 The CI-175 is a high-strength whip antenna designed as an improved direct replacement for the standard Cessna three-hole mounting configuration. It has a tapered glass laminate housing and diecast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

8 oz 18.75 in 118 – 137 MHz 2.5:1 maximum die-cast housing / fiberglass whip polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d three-hole external

CI-291 VHF WHIP/118 - 137 MHZ COMANT

CI-121 VHF WHIP/118 - 137 MHZ COMANT

EDMO# CI-121 MFR# CI-121 The CI-121 is a whip antenna that has a tapered glass laminate housing and diecast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

128

8 oz 18.5 in 118 – 137 MHz 2.5:1 maximum die-cast housing / fiberglass whip polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d four-hole external

1.800.235.3300 | edmo.com

EDMO# CI-291 MFR# CI-291 The CI-291 is a high strength, lightweight whip antenna with the standard Cessna three-hole mounting configuration. It is virtually identical in appearance to many Cessna communication antennas. It has a tapered glass laminate housing and diecast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

8 oz 18.875 in 118 – 137 MHz 2.5:1 maximum die-cast housing / fiberglass polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d three-hole external

EDMO DISTRIBUTORS

Antennas

VHF Antennas CI-292-1 VHF WHIP/118 - 137 MHZ

AV-529 VHF WHIP/118-136MHZ

COMANT

RAMI

EDMO# CI-292-1 MFR# CI-292-1 The CI-292-1 is a whip antenna with the standard Cessna three-hole mounting configuration. Designed specifically for top mounting on an aircraft. It is equivalent to the CI-291 but features a straight tapered stainless steel radiator and diecast aluminum base.

weight: height: frequency: VSWR:

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

8 oz 20.25 in 118 - 137 MHz 2.8:1 maximum aluminum/fiberglass -BNC female 50,000 ft 250 mph C37d, C38d three-hole external

7

material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

8 oz 20 in (CI-292-1); 8.5 in / 23.5 in total (CI-292-2) 118 – 137 MHz 2.5:1 maximum (CI-292-1) 3.0:1 maximum (CI-292-2) die-cast housing / stainless steel polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d three-hole external

EDMO# AV-529 MFR# AV-529 The AV-529 is a whip antenna that has a radiator encapsulated in a fiberglass and die-cast aluminum base.

AV-530 VHF WHIP/118-136 MHZ RAMI

AV-10 VHF WHIP/118 - 137 MHZ RAMI

EDMO# AV-10 MFR# AV-10 The AV-10 is a whip antenna that has a glass laminate housing and die-cast aluminum base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO DISTRIBUTORS

8 oz 20.25 in 118 - 137 MHz 2.0:1 maximum --BNC female 50,000 ft 350 mph C37d, C38d four-hole external

EDMO# AV-530 MFR# AV-530 The AV-530 is a whip antenna that has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

8 oz 24.5 in 118 – 137 MHz 2.5:1 maximum die-cast aluminum/stainless steel -BNC female 50,000 ft 350 mph C37d, C38d three-hole external

1.800.235.3300 | edmo.com

129

Antennas

VHF Antennas AV-534 VHF WHIP/118 – 137 MHZ

DM C63-1/A VHF WHIP/118 - 137 MHZ

RAMI

ITT EXELIS

7

EDMO# AV-534 MFR# AV-534 The AV-534 is a heavy-duty stainless steel whip antenna with a large stress-relieved ferrule and comes complete with porcelain insulators and mounting hardware.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO# DM C63-1/A MFR# C63-1/A The DM C63-1/A is a whip antenna that has a machine-tapered aluminum alloy radiating element and die-cast aluminum base.

8 oz 19.5 in 118 - 137 MHz 3.0:1 maximum stainless steel/porcelain -BNC male with 8 ft transmission line 50,000 ft 350 mph C37d, C38d stress-relieved ferrule with insulators

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

8 oz 20.5 in 118 - 137 MHz 2.0:1 maximum aluminum alloy white polyurethane BNC (female) -250 mph C37d, C38d three-hole external

AV-534L VHF WHIP/118 – 137 MHZ RAMI

DM C70-1/A VHF WHIP/118 - 137 MHZ

EDMO# AV-534L MFR# AV-534L The AV-534L is identical to the AV-534 a heavy-duty stainless steel whip antenna with a large stress-relieved ferrule and comes complete with porcelain insulators and mounting hardware with the addition of an 8’ foot coax cable and BNC connector.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

130

ITT EXELIS

EDMO# DM C70-1/A MFR# C70-1/A The DM C70 series whip antennas are designed for top or bottom installation on high-performance, single, twin and turbo engine fixed and rotary wing aircraft. The lightweight profile is unobtrusive, resists icing and offers low drag.

8 oz 19.5 in 118 - 137 MHz 3.0:1 maximum stainless steel/porcelain -BNC male with 8 ft transmission line 50,000 ft 350 mph C37d, C38d stress-relieved ferrule with insulators

1.800.235.3300 | edmo.com

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

12 oz 15 in 118 - 137 MHz 2.0:1 maximum aluminum white polyurethane BNC (female) -400 mph C37d, C38d four-hole external

EDMO DISTRIBUTORS

Antennas

VHF Antennas DM C70-3 VHF WHIP/118 - 137 MHZ

CI-122 VHF BENT WHIP/118 - 137 MHZ

ITT EXELIS

COMANT

EDMO# DM C70-3 MFR# C70-3 The DM C70 series whip antennas are designed for top or bottom installation on high-performance, single, twin and turbo engine fixed and rotary wing aircraft. The lightweight profile is unobtrusive, resists icing and offers low drag.

12 oz 20.5 in 118 - 137 MHz 2.0:1 maximum -white polyurethane BNC (female) -250 mph C37d, C38d four-hole external

DM C70-6 VHF WHIP/118 - 137 MHZ ITT EXELIS

EDMO# DM C70-6 MFR# C70-6 The DM C70 Series whip antennas are designed for top or bottom installation on high-performance, single, twin and turbo engine fixed and rotary wing aircraft. The lightweight profile is unobtrusive, resists icing and offers low drag. The DM C70-6 and the DM C70-9 are variants of the DM C70-1/A and have a different mounting hole pattern; -6 has a BNC connector that is offset to the left. All other characteristics remain the same.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO DISTRIBUTORS

12 oz 15 in 118 - 137 MHz 2.0:1 maximum aluminum white polyurethane BNC (female) -400 mph C37d, C38d four-hole external

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: Meets RTCA DO-160D requirements

12 oz 18.5 in 118 – 137 MHz 3.0:1 maximum cast housing / stainless steel polyurethane enamel BNC (female) 50,000 ft 350 KTAS C37d, C38d four-hole external

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO# CI-122 MFR# CI-122 The CI-122 has a stainless steel bent whip antenna element and die-cast aluminum base. Designed specifically for mounting to the underside of an aircraft, providing excellent radiation coverage for airto-ground VHF communications.

CI-292-2 VHF BENT WHIP/118 - 137 MHZ COMANT

EDMO# CI-292-2 MFR# CI-292-2 The CI-292-2 is a bent whip antenna with the standard Cessna three-hole mounting configuration. Designed specifically for bottom mounting on helicopters and fixed wing aircraft. It is equivalent to the CI-292-1 featuring a bent tapered stainless steel radiator and die-cast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

8 oz 20 in (CI-292-1); 8.5 in / 23.5 in total (CI-292-2) 118 – 137 MHz 2.5:1 maximum (CI-292-1) 3.0:1 maximum (CI-292-2) cast housing / stainless steel polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d three-hole external

1.800.235.3300 | edmo.com

131

Antennas

VHF Antennas AV-17 VHF BENT WHIP/118 – 137 MHZ

DM C63-3/A BENT WHIP/138 - 174 MHZ

RAMI

ITT EXELIS

7

EDMO# AV-17 MFR# AV-17 The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. Its low profile configuration makes it ideal for helicopters and low-wing aircraft.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

8 oz 8.75 in 118 - 137 MHz 2.5:1 maximum --BNC female 50,000 ft 250 mph C37d, C38d three-hole external

EDMO# DM C63-3/A MFR# DM C63-3/A The DM C63-3/A is a bent whip antenna with extended VHF frequency band (138-174 MHz) that has a machine-tapered aluminum alloy radiating element and die-cast aluminum base. Designed for mounting on the bottom of the fuselage. They are well-suited for helicopter installations.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

8 oz 8.1 in 138 - 174 MHz 3.5:1 maximum aluminum alloy white polyurethane BNC (female) -250 mph three-hole external

DM C63-2 BENT WHIP/118 - 137 MHZ ITT EXELIS

DM C70-4 BENT WHIP VHF/118 - 137 MHZ

EDMO# DM C63-2 MFR# C63-2 The DM C63-2 is a bent whip antenna that has a machine-tapered aluminum alloy radiating element and die-cast aluminum base. Designed for mounting on the bottom of the fuselage. Well-suited for helicopter installations.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

ITT EXELIS

EDMO# DM C70-4 MFR# C70-4 The DM C70-4 is a bend whip antenna designed for bottom installations on single, twin, and turbo engine fixed and rotary wing aircraft where ground clearance does not permit larger antennas. 8 oz 8.1 in 118 - 137 MHz 3.5:1 maximum aluminum alloy white polyurethane BNC (female) -250 mph C37d, C38d three-hole external

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

12 oz 8.9 in 118 - 137 MHz 2.5:1 maximum aluminum alloy white polyurethane BNC (female) -400 mph C37d, C38d four-hole external

Not finding what you need? EDMO carries a wide range of antennas, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need.

132

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

VHF Antennas CI 108 VHF BLADE /118 - 137 MHZ

CI 119 VHF BLADE/118 - 137 MHZ

COMANT

COMANT

The CI-108 is a high-speed blade antenna constructed with solid polyurethane with a white polyurethane finish that resists Skydrol and rain erosion. Suitable for either top or bottom mounting. CI-108-L is equipped with leading edge protection.

EDMO#

MFR#

CI-108 CI-108-L

CI-108 CI-108-L

2.5 lb 12 in 118 – 137 MHz 2.5:1 maximum high-density polyurethane polyurethane enamel BNC (female) 50,000 ft 600 KTAS C37d, C38d six-hole external

DESCRIPTION

weight: 1.25 lb height: 12.9 in frequency: 118 - 137 MHz VSWR: 2.9:1 maximum material: Valox 420 finish: polyurethane enamel connector: BNC (female) altitude: 35,000 ft airspeed: 350 KTAS at 25,000 ft FAA TSO C37d, C38d mounting four-hole internal meets RTCA DO-160D and DO-186A requirements

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

EDMO# CI-119 MFR# CI-119 The CI-119 is a high-speed blade antenna designed for large single or twin-engine aircraft. The antenna assembly is enclosed in an aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place for mechanical integrity. Featuring reduced height for mounting on top or bottom of aircraft.

leading edge protection

CI 138 VHF BLADE/118 - 137 MHZ CI 108-1 VHF BLADE/118 - 153 MHZ COMANT The CI-108-1 is a high-speed blade antenna with extended VHF frequency band (138-153 MHz) constructed with solid polyurethane with a white polyurethane finish that resists Skydrol and rain erosion. Suitable for either top or bottom mounting. CI-108-1-L is equipped with leading edge protection.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

EDMO# CI-108-1 CI-108-1-L

MFR# CI-108-1 CI-108-1-L

EDMO DISTRIBUTORS

2.5 lb 12 in 118 – 137 MHz (CI-108), 118 - 153 MHz (CI08-1) 2.5:1 maximum high-density polyurethane polyurethane enamel BNC (female) 50,000 ft 600 KTAS C37d, C38d six-hole external

COMANT

EDMO# CI-138 MFR# CI-138 The CI-138 is a high-speed blade antenna designed for large single or twin-engine aircraft. The antenna assembly is enclosed in an aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place for mechanical integrity. Featuring reduced height for mounting on top or bottom of aircraft. The mounting hole pattern and RF connector location are compatible with Beechcraft. The RF connector is offset from the centerline of the antenna.

weight: 1 lb height: 13 in frequency: 118 – 137 MHz VSWR: 2.9:1 maximum material: Valox 420 finish: polyurethane enamel connector: BNC (female) - offset altitude: 50,000 ft airspeed: 350 KTAS at 25,000 ft FAA TSO C37d, C38d mounting four-hole internal meets RTCA DO-160D and DO-186A requirements

DESCRIPTION leading edge protection

1.800.235.3300 | edmo.com

133

Antennas

VHF Antennas CI-139 VHF BLADE/118 - 137 MHZ

CI 248-5 VHF BLADE/118 - 137 MHZ

COMANT

COMANT

7

EDMO# CI-139 MFR# CI-139 The CI-139 is a high-speed blade antenna designed for large single or twin-engine aircraft. The antenna assembly is enclosed in an aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place for mechanical integrity. Featuring reduced height for mounting on top or bottom of aircraft. The mounting hole pattern and RF connector location are compatible with Piper.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

1.25 lb 13 in 118 – 137 MHz 2.9:1 maximum Valox 420 polyurethane enamel BNC (female) 50,000 ft 350 KTAS at 25,000 ft C37d, C38d four-hole internal

CI 196 VHF BLADE/118 - 137 MHZ COMANT

EDMO# CI-196 MFR# CI-196 The CI-196 is a high-speed blade antenna designed for large single or twin-engine aircraft. The antenna assembly is enclosed in an aerodynamically shaped, injection molded polyester glass shell with internal components foamed in place for mechanical integrity. Featuring reduced height for mounting on top or bottom of aircraft. The mounting hole pattern and RF connector location are compatible with late model Mooney 201/231/252 aircraft series starting in 1978.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

134

1.25 lb 13 in 118 – 137 MHz 2.9:1 maximum Valox 420 polyurethane enamel BNC (female) 50,000 ft 350 KTAS at 25,000 ft C37d, C38d four-hole internal

1.800.235.3300 | edmo.com

EDMO# CI-248-5 MFR# CI 248-5 The CI-248-5 was developed for Cessna 182 and 182T aircraft matching the look of the Comant ComDat® antenna styling. Featuring a built-in notch filter so the antenna can be placed in close proximity to GPS antennas without causing interference. Rated for most high-powered twins and certified for helicopter applications.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

8.32 oz 17 in 118 – 137 MHz 2.5:1 maximum molded glass-filled nylon polyurethane enamel BNC (female) 50,000 ft -C37d, C38d four-hole external

CI 268-5 VHF BLADE/118 - 137 MHZ COMANT

EDMO# CI-268-5 MFR# CI 268-5 The CI 268-5 uses the same radome as the multi-function ComDat antennas featuring the same super tough, nickel-plated aluminum base plate with integral Nitrile ‘O’ ring for pressurized applications. Truly unique, the CI 268-5 is the only VHF antenna with a built-in notch filter that allows installation in close proximity to GPS antennas without cosite interference.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

1.25 lb 14.1 in 118 - 137 MHz 2.9:1 maximum molded glass-filled nylon polyurethane enamel BNC (female) 35,000 ft 325 KTAS maximum @ sea level C37d, C38d four-hole external

EDMO DISTRIBUTORS

Antennas

VHF Antennas CI 268-60 VHF BLADE/118 - 137 MHZ

DM C50-17 VHF BLADE/116 - 156 MHZ

COMANT

ITT EXELIS

EDMO# CI-268-60 MFR# CI-268-60 The CI-268-60 is blade antenna utilizing the same design as the Comant ComDat® antennas and the same footprint and offset connector location as a CI-238, making it an excellent option when replacing a CI-238 or matching the look of a ComDat® antenna installation. Constructed with a durable aluminum base plate with integral Nitrile “O” ring for pressurized applications. Built-in notch filter allows installations in close proximity to GPS antennas without interference.

1.25 lb 14.1 in 118 – 137 MHz 2.9:1 maximum molded glass-filled nylon polyurethane enamel BNC (female) offset 35,000 ft 325 KTAS C37d, C38d four-hole external

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting

3.3 lb 16 in 116 - 156 MHz 2.0:1 maximum aluminum white polyurethane C (female) --C37d, C38d ten-hole external

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

EDMO# DM C50-17 MFR# DM C50-173 The DM C50-17 is a high-speed blade antenna with extended VHF frequency band (116 -153 MHz) designed for use on commercial air transports and business turbojet aircraft. Selected as the original equipment for the Boeing 757, 767, and 777 and Airbus A300.

DM C60 SERIES VHF BLADE/118 – 137, 152 MHZ AVT-4 VHF BLADE/118 - 137 MHZ RAMI

EDMO# AVT-4 MFR# AVT-4 The AVT-4 is a high-speed blade antenna that incorporates a high strength, low drag blade design with an aluminum radiator, encapsulated in rigid polyurethane foam. - Skydrol resistant

ITT EXELIS The DM C60 series blade antennas are designed for top or bottom fuselage mounting. Electrical elements of the antenna are sealed by foamed-in-place resin within a fiberglass housing making this antenna rugged enough for use in commercial and general aviation aircraft.

weight: height: frequency: weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting

1.25 lb 13 in 118 – 137 MHz 3.0:1 maximum LURAN-S plastic Skydrol-resistant polyurethane paint BNC (female) 50,000 ft 350 mph C37d, C38d four-hole internal

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting

EDMO# DM C60-1 DM C60-171

EDMO DISTRIBUTORS

1.6 lb 11.9 in 118 - 137 MHz (DM C60-1) 116 - 152 MHz (DM C60-171) 2.0:1 maximum high density unicellular foam / fiberglass housing white polyurethane BNC (male) -600 mph C37d, C38d six-hole external

MFR# C60-1 DM C60-17-1

1.800.235.3300 | edmo.com

DESCRIPTION 118-137 MHz 116-152 MHz

135

Antennas

VHF Combo Antennas CI 211 VHF BENT BLADE/118 - 137 MHZ COMANT

7

The CI-211 is a high-speed bent blade antenna designed as a low-profile top or bottom mount antenna for large twins and medium jet aircraft. Skydrol and rain erosion resistant. CI-211-L is equipped with leading edge protection.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

EDMO#

MFR#

CI-211 CI-211-L

CI 211 CI 211-L

1.6 lb 8.25 in 118 – 137 MHz 2.9:1 maximum high density polyurethane polyurethane enamel BNC (female) 50,000 ft 250 KTAS C37d, C38d four-hole external

COMANT

EDMO# CI-211-16 MFR# CI 211-16 The CI-211-16 is a high-speed bent blade antenna with extended VHF frequency band (138-154 MHz) designed as a low-profile top or bottom mount antenna for large twins and medium jet aircraft. -Skydrol and rain erosion resistant.

weight: 1.6 lb height: 8.25 in frequency: 118 - 154 MHz VSWR: 2.9:1 maximum material: Valox 420 finish: polyurethane enamel connector: BNC (female) - offset altitude: 50,000 ft airspeed: 573 KTAS at 25,000 ft FAA TSO C37d, C38d mounting six-hole: four external and two internal meets RTCA DO-160D and DO-186A requirements

DESCRIPTION CI 211 antenna CI 211 antenna with leading edge protection

CI 211-1 VHF BENT BLADE/118 - 154 MHZ COMANT

EDMO# CI-211-1 MFR# CI 211-1 The CI-211-1 is a high-speed bent blade antenna with extended VHF frequency band (138-153 MHz) designed as a low-profile top or bottom mount antenna for large twins and medium jet aircraft. Skydrol and rain erosion resistant.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

136

CI 211-16 VHF BENT BLADE/118 - 154 MHZ

1.6 lb 8.25 in 118 – 153 MHz 2.9:1 maximum high density polyurethane polyurethane enamel BNC (female) 50,000 ft 573 KTAS at 45,000 ft C37d, C38d four-hole external

1.800.235.3300 | edmo.com

VHF COMBO ANTENNAS CI 2480-200 VHF/GPS WHIP/118 - 137 MHZ COMANT

EDMO# CI-2480200 MFR# CI 2480-200 A dual function ComDat VHF and GPS antenna. Matches single engine common teardrop footprint. Designed for popular 26.5 dB gain GPS panel mount systems. Class Gamma 1 equipment. Not compliant for GPS WAAS Class Gamma 2 and 3 applications.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO 160D requirements

9.6 oz -118 - 137 MHz (VHF) 1575.42 +/-3 MHz (GPS) 2.5:1 maximum (VHF) 2.0:1 maximum (GPS) --VHF - BNC / GPS - TNC --C37d, C38d, C144 four-hole external

EDMO DISTRIBUTORS

Antennas

VHF Combo Antennas CI 2480-201 VHF/GPS WHIP/118 - 137 MHZ

CI 2480-216 VHF/XM WHIP/118 - 137 MHZ

COMANT

COMANT

EDMO# CI-2480201 MFR# CI 2480-201 A dual function ComDat VHF and GPS antenna. Matches single engine common teardrop footprint. Compatible with Garmin 17 dB GPS panel mount receiver systems. Not compatible with most portable GPS receiver systems.

weight: height: frequency: VSWR:

CI 2580-200 VHF/GPS WAAS WHIP/118 137 MHZ COMANT

EDMO# CI-2580200 MFR# CI 2580-200 A dual function ComDat VHF and GPS WAAS antenna. Designed to meet the GPS WAAS Gamma 3 specifications required by the Garmin G1000 system. Matches single engine common teardrop footprint. Not intended for portable GPS receiver systems.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

EDMO DISTRIBUTORS

9.6 oz -118 - 137 MHz (VHF) 1575.42 +/-3 MHz (GPS) 2.5:1 maximum 1.5:1 maximum --VHF - BNC / GPS - TNC --C169 (Class C, D, E, 3, 4, 5, 6), C144 four-hole external

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO-160D requirements

11.2 oz -118 - 137 MHz (VHF) 2332.5 – 2345.0 MHz (XM) 2.5:1 maximum (VHF) 1.5:1 maximum (XM) --VHF – BNC/XM - TNC --C37d, C38d four-hole external

7

material: finish: connector: altitude: airspeed: FAA TSO mounting meets RTCA DO 160D requirements

9.6 oz -118 - 137 MHz (VHF) 1575.42 +/-3 MHz (GPS) 2.5:1 maximum (VHF) 2.0:1 maximum (GPS) --VHF - BNC / GPS - TNC --C37d, C38d, C129 four-hole external

EDMO# CI-2480216 MFR# CI 2480-216 A dual function ComDat VHF and XM antenna. Matches single engine common teardrop footprint. Perfect to add XM weather data to a stand-alone VHF mounted antenna. The patented VHF harmonic suppression also protects co-located stand-alone GPS antennas, allowing for more antennas in less total area. Not compatible with most portable GPS receiver systems.

CI 2728-410 VHF/GPS WAAS/XM WHIP/ 118 – 137 MHZ COMANT

EDMO# CI-2728410 MFR# CI 2728-410 A triple function VHF, GPS and XM Weather antenna for twin and light jet aircraft. Provides 80 dB of VHF harmonic suppression allowing VHF and GPS to function in one radome without in-line filters. Designed to meet the GPS WAAS Gamma 3 specifications required by the Garmin G1000 system. Enables primary navigation using GPS WAAS, including terminal navigation and approach to landing. XM Weather antenna is designed for low gain systems such as the Garmin GDL-69/69A or Heads Up systems with shorter coax runs. Lighting diverter strips for use with the CI-2728-410 p/n: A272833

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed:

1.25 lb -118 – 137 MHz (VHF) 1575.42 +/-3 MHz (GPS) 2332.5 – 2345.0 MHz (XM weather) 1.5:1 maximum (GPS and XM weather) --VHF - BNC / GPS - TNC / XM - TNC ---

1.800.235.3300 | edmo.com

137

Antennas

VHF Combo Antennas

FAA TSO mounting meets RTCA DO 160D requirements

C169, C144 four-hole external

finish: connector: altitude: airspeed: mounting: meets RTCA DO-160G requirements

-BNC (VHF); TNC (UHF) --six-hole external

CI 295-200 SAR DUAL BAND BLADE/136-174 MHZ & 380-520 MHZ

7

COMANT

EDMO# CI-295-200 MFR# CI 295-200 The CI-295-200 is a single antenna that offers frequency spectrum coverage for two of the most used Public Service bands by Search and Rescue teams around the world. Dual ports provide maximum effectiveness and flexibility, allowing the user connectivity to any radio set required for the mission. The CI 295 Dual Band/Dual Port is helicopter rated for the toughest vibration environment. Application includes helicopters and fixed wing turbine powered aircraft.

weight: 2.0 lb height: -frequency: 136-174 MHz, 380-520 MHz VSWR: 3.0:1 maximum material: -finish: -connector: BNC (VHF); TNC (UHF) altitude: -airspeed: -mounting: six-hole external meets RTCA DO-160G requirements

CI 295-250 SAR DUAL BAND BLADE/136-174 MHZ & 764-870 MHZ

CI-295-300 TRI-BAND SINGLE PORT SAR. VHF: 136-174MHZ, UHF: 380-520MHZ, UHF: 764-870MHZ COMANT

EDMO# CI-295-300 MFR# CI-295-300 The CI-295-300 Tri-Band Single Port airborne SAR antenna works within the public service spectrum and with radios operating within Motorola’s APX architecture. This antenna operates within the P25 standards for maximum effectiveness and connectivity and is helicopter rated for high-vibration environments. The single port designed saves time and space during installation. Application includes helicopters and fixed-wing turbine powered aircraft.

weight: 2.0 lb height: -frequency: 136-174 MHz, 380-520 MHz 764-870 MHz VSWR: 3.0:1 maximum material: -finish: -connector: BNC (VHF); TNC (UHF) altitude: -airspeed: -mounting: six-hole external meets RTCA DO-160G requirements and 810G method 514.6 vibration cat 14-24

COMANT

EDMO# CI-295-250 MFR# CI 295-250 The CI-295-200 is a single antenna that offers frequency spectrum coverage for two of the most used Public Service bands by Search and Rescue teams around the world. Dual ports provide maximum effectiveness and flexibility, allowing the user connectivity to any radio set required for the mission. The CI 295 Dual Band/Dual Port is helicopter rated for the toughest vibration environment. Application includes helicopters and fixed wing turbine powered aircraft.

weight: height: frequency: VSWR: material:

138

2.0 lb -136-174 MHz, 764-870 MHz 3.0:1 maximum --

1.800.235.3300 | edmo.com

AT-1108ARC VHF/UHF BLADE/116 – 152 MHZ, 225 – 400 MHZ RAMI

EDMO# AT-1108ARC MFR# AT-1108/ARC The AT-1108/ARC Antenna is a combined VHF/UHF airborne communications antenna designed for usage airspeeds of less than Mach 1. The antenna housing is fiberglass epoxy, designed to withstand the exposure to sand and dust particles of desert areas and is foam-filled to reduce the effect of extreme temperature changes, extreme humidity, and excessive shock and vibration. Meets MILSPEC MIL-A-55680 and has continuous operation altitudes of up to 50,000 ft and temperatures between -65° F and 131° F. The antenna can withstand the impact shock of 30g and the steady-state acceleration of 6g. The isolation between

EDMO DISTRIBUTORS

Antennas

Navigation Antennas the bands is > 40 dB. A gasket for RF shielding and positive sealing is included. The antenna is coated with a Skydrol resistant lusterless CARC black paint.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting: MIL-A-55680

3.5 lb -116 – 152 MHz, 225 - 400 MHz 3.0:1 maximum stainless steel/porcelain Skydrol-resistant CARC paint BNC female (VHF); TNC female (UHF) 50,000 ft below Mach 1 six-hole external

NAVIGATION ANTENNAS CI 120G/S VOR/LOC/GS/BLADE/SINGLE OUTPUT/108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT VOR/LOC/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single engine, twin, jet, and helicopter aircraft. Complete set includes two blades, each with single BNC connector output, two coax interconnect cables and a signal combiner output providing for a single cable run to the avionics installation.

AV-925 VHF/UHF/MULTIBAND BLADE RAMI

weight: height: frequency:

1.4 lb per blade 6 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 6.0:1 108 – 118 MHz 5.0:1 329 – 335 MHz material: -finish: polyurethane enamel connector: BNC/single output combiner altitude: 50,000 ft airspeed: 600 knots TAS @ 25,000 ft FAA TSO C34e, C36e, C40c mounting: four-hole external meets RTCA DO-160D, DO-192, DO-195, and DO-196 requirements

EDMO# weight: height: frequency:

1.8 lb 12.34 in 136.0–174.0 MHz 380.0–406.0 MHz 406.0–406.1 MHz (TSO C126a)  406.1–520.0 MHz 760.0–870.0 MHz VSWR: 1.5:1 Max (406.0–406.1 MHz)  3.0:1 Max (All Other Bands) material: -finish: AV-925 Gloss White  AV-925(-1) CARC Black connector: BNC (female) altitude: -airspeed: -mounting: six-hole external meets DO-160G, Section 8, Category U requirements

Not finding what you need? EDMO carries a wide range of antennas, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need.

CI-120 G/S

DESCRIPTION CI 120G/S antenna

REPLACEMENT PARTS CI-120-1 CI-120-3

CI 120-1 CI 120-3

single antenna blade one output power combiner

CI 120-200G/S VOR/LOC/GS/BLADE/DUAL OUTPUT/108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT VOR/LOC/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single engine, twin, jet, and helicopter aircraft. Complete set includes two blades, each with single BNC connector output, and two coax interconnect cables. Dual output signal combiner providing for separate RF cable runs to the avionics installation for NAV1 and NAV2 receivers is included.

weight: height:

EDMO DISTRIBUTORS

MFR# CI 120G/S

7

EDMO# AV-925 MFR# AV-925 The AV-925 is a multiband blade type antenna for airborne FM transceivers typically found in first responder aircraft. It meets DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies. Also qualified to perform as a 406 MHz ELT antenna, it is well suited for this function on higher speed, fixed wing aircraft.

1.4 lb per blade 6 in

1.800.235.3300 | edmo.com

139

Antennas

Navigation Antennas

frequency:

108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 6.0:1 108 – 118 MHz 5.0:1 329 – 335 MHz material: -finish: polyurethane enamel connector: BNC/single output combiner altitude: 50,000 ft airspeed: 600 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: four-hole external meets RTCA DO-160D, DO-192, DO-195, and DO-196 requirements

EDMO#

MFR#

REPLACEMENT PARTS single antenna blade two input - two output power combiner

7

CI 120-1 CI 120-4

CI 120-200G/S-L VOR/LOC/GS/BLADE/ DUAL OUTPUT/108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT

EDMO# 120200GS-L MFR# CI 120-200G/S-L VOR/LOC/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single engine, twin, jet, and helicopter aircraft. The blades have leading edge protection and come with a rubber gasket enabling mounting on curved vertical stabilizers. This antenna also provides glideslope reception capability. Complete set includes a pair (2) of blades, each with a single BNC connector output, and two coax interconnect cables. The dual output signal combiner is included (provides for separate RF cable runs to the avionics installation for NAV1 and NAV2 receivers).

weight: height: frequency:

1.4 lb per blade 6 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 6.0:1 108 – 118 MHz 5.0:1 329 – 335 MHz material: -finish: polyurethane enamel connector: BNC/single output combiner altitude: 50,000 ft airspeed: 600 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: four-hole external Meets RTCA DO-160D, DO-192, DO-195, and DO-196 requirements

140

COMANT

EDMO# CI-120-400 MFR# CI 120-400 Comant designed this VOR/LOC/GS navigation antenna blade set for the Cessna 182 Series. Includes a pair (2) of blades, each with a single BNC output, and two coax interconnect cables. Single BNC output phasing combiner providing for a single RF cable run to the avionics installation.

DESCRIPTION

CI-120-200 CI 120-200G/S CI 120-200G/S antenna CI-120-1 CI-120-4

CI 120-400 VOR/LOC/GS/BLADE/DUAL OUTPUT/108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS)

1.800.235.3300 | edmo.com

weight: height: frequency:

1.4 lb per blade 6 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 108 – 118 MHz 3.5:1 329 – 335 MHz material: -finish: polyurethane enamel connector: BNC/single output combiner altitude: 50,000 ft airspeed: 300 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: four-hole external meets RTCA DO-160D, DO-192, DO-195, and DO-196 requirements

CI-2437-01 VOR/GS DUAL OUTPUT BLADE ANTENNA/118-108 MHZ, 329-336 MHZ COMANT

EDMO#: CI-2437-01 MFR#: CI-24-37-01 Comant has resurrected the popular Trivec 24-37-01 VOR Glideslope Balanced Loop Blade Set. This heavy duty set is ideal for Beechcraft King Air and other similar aircraft. –– Each blade uses an eight bolt mounting pattern –– Includes: two (2) blade antennas and one (1) phasing coupler with integral coaxial cables

height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

6.7 in 108-118 MHz 329-336 MHz 5.0:1 max polyester resin and fiberglass filled with polyurethane foam white polyurethane paint BNC series MIL type UG 88/U --C34c, C36c, and C40b eight-hole external

EDMO DISTRIBUTORS

Antennas

Navigation Antennas DM N4-15 VOR/LOC/BLADE/DUAL OUTPUT 108 – 122 MHZ ITT EXELIS

EDMO# DM N4-15 MFR# DM N4-15 The DM N4-15 VOR/LOC dual output antenna is designed for use on high-performance aircraft where aerodynamic drag and component weight must be held at a minimum. The system provides increased range and reduced bearing error, not possible with dipole type installations. Rugged metal edges provide erosion resistance and flush glass fiber housings ensure smooth airflow and reduced drag.

ITT EXELIS The DM N4-33 VOR/LOC single output antenna is designed for use on high-performance aircraft where aerodynamic drag and component weight must be held at a minimum. The system provides increased range and reduced bearing error, not possible with dipole type installations. Rugged metal edges provide erosion resistance and flush glass fiber housings ensure smooth airflow and reduced drag. –– Available with either BNC or TNC female connectors.

DESCRIPTION DM N4-33 antenna with BNC female DM N4-33 antenna with TNC female

VOR/LOC/GS/BLADE/SINGLE OUTPUT 108 – 122 MHZ (VOR/LOC), 329 – 335.3 MHZ (GS) ITT EXELIS

EDMO# DM N4-17/N MFR# N4-17/N The DM N4-17N VOR/LOC/ GS antenna is designed for general aviation, commercial, and military aircraft that operate up to Mach 1.0. This antenna provides a low-cost, lightweight, low-drag antenna for stateof-the-art avionics systems. The balanced loop design assures an omnidirectional radiation pattern at the horizon to obtain the maximum signal for standard VOR and area navigation, which in turn provides more receiving distance and reliable system performance. The system consists of two antenna elements, two feed cables and gaskets, and a phasing coupler (DM N4-17-2).

weight: height: frequency:

DM N4-33 VOR/LOC/BLADE/108 – 122 MHZ

MFR# N4-33/C

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

7

weight: 4.2 lb height: -frequency: 108 – 122 MHz VSWR: 5.0:1 material: -finish: -connector: DM N4-15 TNC female altitude: -airspeed: 250 mph FAA TSO C40a mounting: ten-hole mount (each antenna element) MIL-E-5400, MIL-T-5422, MIL-F-17555, MIL-T-18303, MIL-T-18307

EDMO# DM N4-33/C DM N4-33/D

1.32 lb 12.18 in 108 – 122 MHz 329 – 335.3 MHz 5.0:1 --BNC female -250 mph C34e, C36e, C40c four-hole mount (each antenna element)

CI 157P VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT

weight: height: frequency: VSWR: material: finish: connector:

4.2 lb -108 – 122 MHz 5.0:1 --/C BNC female /D TNC female altitude: -airspeed: 250 mph FAA TSO C40a mounting: ten-hole mount (each antenna element) MIL-E-5400, MIL-T-5422, MIL-F-17555, MIL-T-18303, MIL-T-18307

EDMO DISTRIBUTORS

EDMO# CI-157P MFR# CI 157P “V” Dipole VOR/LOC/GS antenna with fixed stainless steel elements that are compatible with Piper aircraft mounting. Integral ferrite balun provides for higher radiation efficiency. Radiating elements are not removable. Not approved for helicopter installations.

1.800.235.3300 | edmo.com

141

Antennas

Navigation Antennas

weight: height: frequency:

8 oz 18 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 maximum (108 – 118 MHz VOR/LOC) 3.0:1 maximum (329 – 335 MHz GS) material: -finish: black housing / stainless steel whips connector: BNC altitude: 50,000 ft airspeed: 250 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: two-hole mount meets RTCA DO-160C, DO-192, DO-195, and DO-196 requirements

7

CI 158C VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT “V” Dipole VOR/LOC/GS antenna with detachable/ replicable stainless steel elements mounts on top of vertical stabilizer for most single engine general aviation aircraft. Integral ferrite balun provides for higher radiation efficiency. Not approved for helicopter installations.

weight: height: frequency:

5.6 oz 17.625 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 maximum (108 – 118 MHz VOR/LOC) 3.0:1 maximum (329 – 335 MHz GS) material: -finish: black housing / stainless steel whips connector: BNC altitude: 50,000 ft airspeed: 250 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: two-hole mount meets RTCA DO-160C, DO-192, DO-195, and DO-196 requirements

EDMO# CI-158C

MFR#

DESCRIPTION

CI 158C

CI 158C antenna

REPLACEMENT PARTS B15804

B15804

single antenna element

CI 158C-2 VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT

EDMO# CI-158C-2 MFR# CI 158C-2 “V” Dipole VOR/LOC/GS antenna with detachable/ replicable stainless steel elements mounts on top of vertical stabilizer for most single engine general aviation aircraft. Integral ferrite balun provides for higher radiation efficiency. Not approved for helicopter installations.

weight: height: frequency:

5.6 oz 17.625 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 108 – 118 MHz 3.0:1 329 – 335 MHz material: -finish: black housing / stainless steel whips connector: BNC altitude: 50,000 ft airspeed: 250 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: four-hole mount replacement parts: B15804: antenna element meets RTCA DO-160, DO-192, DO-195, and DO-196 requirements

CI 159C VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT “V” Dipole VOR/LOC/GS antenna with detachable/ replicable anti-static fiberglass elements mounts on top of vertical stabilizer for most single engine general aviation aircraft. Integral ferrite balun provides for higher radiation efficiency. Not approved for helicopter installations.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed:

142

1.800.235.3300 | edmo.com

5.6 oz 17.625 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) 3.0:1 Max. 108 – 118 MHz (VOR/LOC) 3.0:1 Max. 329 – 335 MHz (GS) Delrin housing / polyester glass laminate over stainless steel radiators black housing / fiberglass whips BNC 50,000 ft 250 KTAS @25,000 ft

EDMO DISTRIBUTORS

Antennas

Navigation Antennas

FAA TSO C34e, C36e, C40c mounting: two-hole mount meets RTCA DO-160, DO-192, DO-195, and DO-196 requirements

EDMO# CI-159C

MFR#

DESCRIPTION

CI 159C

CI 159C antenna

REPLACEMENT PARTS B15906

B15906

single antenna element

CI 215 VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT

9.6 oz 16 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 Max. 108 – 118 MHz (VOR/LOC) 3.0:1 Max. 329 – 335 MHz (GS) material: Delrin mounts / glass laminate whips finish: black housing / polyurethane enamel connector: BNC (female) altitude: 50,000 ft airspeed: 250 KTAS @25,000 ft FAA TSO C34c, C36e, C40a mounting: Cessna 182 and 210 mounting configuration meets RTCA DO-160, DO-192, DO-195, and DO-196 requirements

COMANT

EDMO# CI-259-E MFR# CI 259E “V” dipole VOR/LOC/ GS antenna with fixed anti-static fiberglass elements for use on helicopters. Features an integral ferrite balun and fixed element construction. Mechanically designed to withstand the severe low frequency vibration environment experienced by typical helicopter installations. Approved for use on helicopters.

weight: height: frequency:

5.6 oz 16 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) VSWR: 3.0:1 maximum (108 – 118 MHz VOR/ LOC) 3.0:1 maximum (329 – 335 MHz GS) material: Delrin housing / polyester glass laminate over stainless steel radiators finish: black housing / stainless steel whips connector: BNC altitude: 50,000 ft airspeed: 250 knots TAS @25,000 ft FAA TSO C34e, C36e, C40c mounting: two-hole mount meets RTCA DO-160, DO-192, DO-195, and DO-196 requirements

7

“V” Dipole VOR/LOC/GS antenna with detachable/replicable anti-static fiberglass elements featuring two integrally molded mounting legs or “spacers” for increased strength. Radiating elements are laminated with polyester glass material for improved precipitation static protection. Interchangeable with the VOR/ LOC/GS antennas used on most Cessna single engine aircraft since 1980 including the Cessna 182 and 210 models.

CI 259E VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS)

weight: height: frequency:

EDMO# CI-215

MFR# CI 215

DESCRIPTION CI 215 antenna

REPLACEMENT PARTS B15906

B15906

single antenna element

AV-12, AV-12L VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 328 – 336 MHZ (GS) RAMI

EDMO# AV-12, AV-12L MFR# AV-12, AV-12L The AV-12 and AV-12L are VOR/LOC/GS antennas with fixed stainless steel elements molded directly into a high-impact thermo Bakelite center insulator. The stainless steel elements are ground to close tolerances to provide a low profile. AV-12L is supplied with a 25-foot coax cable. EDMO# AV-12 AV-12L

EDMO DISTRIBUTORS

MFR# AV-12 AV-12L

DESCRIPTION AV-12 antenna AV-12L antenna / includes 25-foot coax cable

1.800.235.3300 | edmo.com

143

Antennas

Navigation Antennas

weight: height: frequency: VSWR: material: finish: connector:

7

altitude: airspeed: FAA TSO mounting:

5.5 oz -108 – 118 MHz 328 – 336 MHz 2.2:1 maximum stainless steel / Bakelite -threaded two studs accept transmission line assembly with integral balun transformer (only included with AV-12L) 50,000 ft 350 mph C40c installer drill holes as needed

8 oz -108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) 3.0:1 maximum 108 – 118 MHz 2.0:1 maximum 329 – 335 MHz --BNC female 50,000 ft 350 mph C34e, C36e, C40c two-hole mount

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

AV-520 VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS)

AV-532, AV-532L VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 328 – 336 MHZ (GS)

RAMI

RAMI

EDMO# AV-520 MFR# AV-520 The AV-520 is a “V” style VOR/LOC/GS antenna that uses detachable/replicable painted stainless steel elements and an internal balun transformer.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

The AV-532 and AV-532L are VOR/LOC/GS antennas that use detachable/ replicable stainless steel elements to reliably withstand vibration and wind loads. The insulator is weather-sealed compression-molded Bakelite. The unit may be mounted with the V pointed either forward or aft. AV-532L is supplied with a 25-foot coax cable. 8 oz -108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) 3.0:1 maximum 108 – 118 MHz 2.0:1 maximum 329 – 335 MHz stainless steel -BNC female 50,000 ft 350 mph C34e, C36e, C40c two-hole mount

AV-525 VOR/LOC/GS/“V” DIPOLE 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) RAMI

EDMO# AV-525 MFR# AV-525 The AV-525 is a VOR/LOC/ GS antenna that uses detachable/replicable fixed stainless steel elements molded directly into a high-impact thermo Bakelite center insulator and is compatible with Piper aircraft mounting.

144

weight: height: frequency:

1.800.235.3300 | edmo.com

weight: height: frequency:

11 oz -108 – 118 MHz (VOR/LOC) 328 – 336 MHz (GS) 2.0:1 maximum stainless steel / Bakelite -threaded studs accept transmission line assembly with integral balun transformer (only included with AV-532L) 50,000 ft 350 mph C40c two-hole mount

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO# AV-532 AV-532L

MFR# AV-532 AV-532L

DESCRIPTION AV-532 antenna AV-532L antenna / includes cable

EDMO DISTRIBUTORS

Antennas

Towel Bar/VOR/LOC/GS Antennas

TOWEL BAR/VOR/LOC/ GS ANTENNAS CI 205-3 VOR/LOC/GS/TOWEL BAR/SINGLE OUTPUT 108 – 118 MHZ (VOR/LOC), 329 – 335 MHZ (GS) COMANT

weight: height: frequency:

1.75 lb 5.25 in 108 – 118 MHz (VOR/LOC) 329 – 335 MHz (GS) 5.0:1 108 – 118 MHz 5.0:1 329 – 335 MHz Delrin mounts, aluminum polyurethane enamel BNC (female) 50,000 ft 300 KTAS @25,000 ft C34e, C36e, C40c eight-hole mount (each antenna element)

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

EDMO#

MFR#

DESCRIPTION

CI-205-3

CI 205-3

CI 205-3 antenna

C20544

power combiner

ACCESSORIES C20544

DM N4-4 VOR/LOC/TOWEL BAR/SINGLE OUTPUT/108 – 122 MHZ ITT EXELIS The DM N4-4 VOR/LOC towel bar style antenna is lightweight and consists of two green, round magnesium tubing elements connected together by a cable harness to provide a single output. Designed specifically for light planes and helicopters.

MIL-E-5400, MIL-T-5422

EDMO#

MFR#

DESCRIPTION

DM N4-4

DM N4-4

DM N4-4 antenna

N4-4.2

“T” coax cable

ACCESSORIES DM N4-4.2

DM N48-1, DM N48-3 VOR/LOC/TOWEL BAR/SINGLE OUTPUT/108 - 118 MHZ ITT EXELIS The DM N48-Series balanced loop design assures an omnidirectional radiation pattern at the horizon to obtain the maximum signal for standard VOR and area navigation systems installed in lightweight aircraft, medium twins, and helicopters operating at up to 250 mph. Dual VOR receiver operation is obtained when the antennas are used with the DM H21-1 diplexer. The DM N48-3 antenna uses a phasing coupler which enables ease of installation if an access panel is not available or if the vertical stabilizer is so narrow at the point of installation it makes it necessary to install the antenna with both cable leads forward or aft.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

EDMO# DM N48-1 DM N48-3

EDMO DISTRIBUTORS

2 lb (without cable) -108 – 122 MHz 5.0:1 magnesium tubing -BNC --C40a twelve-hole mount (each antenna element)

7

EDMO# CI-205-3 MFR# CI 205-3 Towel Bar style VOR/LOC/ GS antenna designed for mounting on the aircraft vertical stabilizer or helicopter tail boom. The antenna features low weight and drag. Its tabular structure minimizes helicopter rotor “down wash” forces. Includes a set of two “towel bar” sensor elements, each with a BNC output connector and a one-piece dual coax interconnect signal combiner harness with single BNC connector output. Provides for a single cable run to the avionics location. Approved for light helicopter installations.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

1.12 lb -108 - 118 MHz 5.0:1 --BNC male -250 mph eight-hole mount (each antenna element)

MFR# DM N48-1 DM N48-3

DESCRIPTION 180 degree lead orientation phasing coupler

1.800.235.3300 | edmo.com

145

Antennas

Towel Bar/VOR/LOC/GS Antennas

EDMO#

MFR#

DESCRIPTION

REPLACEMENT PART DM N48-1-2

DM N48-1-2

single antenna element

DM N42-1 VOR/LOC/GS TOWEL BAR/ SINGLE OUTPUT/108-118 MHZ (VOR/LOC), 329 TO 335 MHZ (GS)

7

ITT EXELIS

EDMO# DM N42-1 MFR# DM N42-1 The DM N42-1 is a tail-mounted antenna for use with VOR, localizer and glide slope receivers. It provides the outstanding electrical performance of a balanced, center-fed loop at minimum cost. The input balun transformer is permanently sealed inside the center housing. Output cables extend from this transformer, through each side bar, to the feed points at the bulge on each element. This unusual configuration permits reliable, economical installation on aircraft that cruise at speeds up to 230 mph. When properly installed, the antenna receives the horizontally polarized VOR and localizer signals

with uniform high sensitivity from all directions around the aircraft over the full VOR/Localizer Band. Because of the inherent characteristics of all balanced loop-type antennas, vertically polarized, error-producing signals are rejected. The antenna also has excellent forward reception over the glide slope band (329 to 335 MHz) and can be used for this function by adding a DMH22-1 coupler to the system.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

4.2 lb -108-118 MHz (VOR/LOC), 329 to 335 MHz (GS) 5.0:1 -white polyurethane BNC -250 mph C40a 12-hole mount

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY.

EDMO is a wholesale distributor of aircraft electronics and accessories, installation and bench supplies, test equipment and tooling, tactical communications products, ground support equipment, and pilot supplies. This extensive product range is complemented by rapid delivery, competitive prices, and personalized service. Give us a call at 1.800.235.3300 or visit edmo.com for more info.

Antennas

DME Transponder Antennas

DME TRANSPONDER ANTENNAS CI 101 TRANSPONDER STUB/ 1030 - 1090 MHZ COMANT

EDMO# CI-101 MFR# CI 101 The CI-101 transponder antenna is a top-loaded stub monopole design. The antenna radiator is mechanically captivated and is machined from solid brass for impact resistance. Contact points are made from beryllium copper. Metallic parts are plated with bright nickel for corrosion protection. Mounts through a single 0.6 inch diameter mounting hole.

0.96 oz 3.33 in 1030 - 1090 MHz 1.5:1 1030 MHz / return loss 14.0 dB 1.5:1 1090 MHz / return loss 14.0 dB material: brass / beryllium copper finish: tin-nickel alloy connector: BNC (female) altitude: 30,000 ft airspeed: 300 KTAS at 25,000 ft FAA TSO C74c mounting: one-hole internal meets RTCA DO-138 environmental requirements

CI 105 DME TRANSPONDER BLADE/960 1220 MHZ, 1025 – 1150 MHZ COMANT

EDMO# CI-105 MFR# CI 105 The CI-105 DME transponder blade antenna is encased in a glass-reinforced polyester molded shell and has a two-stud mounting configuration.

weight: height: frequency: VSWR:

3.84 oz 3.23 in 960 - 1220 MHz, 1025 – 1150 MHz 1.5:1 max 960 – 1220 MHz 1.3:1 max 1025 – 1150 MHz material: molded shell finish: polyurethane enamel connector: BNC (female) altitude: 70,000 ft airspeed: 400 KTAS at 25,000 ft FAA TSO C66a, C74c mounting: two-hole internal meets RTCA DO-160C environmental requirements

EDMO DISTRIBUTORS

COMANT

EDMO# CI-105-3 MFR# CI 105-3 This CI 105-3 DME transponder blade antenna is encased in a glass-reinforced polyester molded shell and has a threehole flange external mounting configuration.

weight: height: frequency: VSWR:

3.84 oz 3.31 in 960 - 1220 MHz 1.5:1 maximum (960 – 1220 MHz) 1.3:1 maximum (1025 – 1150 MHz) material: -finish: polyurethane enamel connector: BNC (female) altitude: 70,000 ft airspeed: 450 KTAS at 25,000 ft FAA TSO C66b, C74c mounting: three-hole external meets RTCA DO-160C environmental requirements

7

weight: height: frequency: VSWR:

CI 105-3 DME TRANSPONDER BLADE/960 - 1220 MHZ

CI-105-6, CI-105-7 DME TRANSPONDER BLADE/960 - 1220 MHZ COMANT This CI 105-6, CI-105-7 DME transponder blade antennas are encased in a glass-reinforced polyester molded shell and has a four-hole external mounting configuration. Available with the following BNC and C connectors.

CI-105-6 weight: height: frequency: VSWR:

6.4 oz maximum 3.31 in 960 - 1220 MHz 1.5:1 maximum (960 – 1220 MHz) 1.3:1 maximum (1025 – 1150 MHz) material: molded radome finish: polyurethane enamel connector: BNC, C (see note above) altitude: 70,000 ft airspeed: 400 KTAS at 25,000 ft FAA TSO C66b, C74c mounting: four-hole external meets RTCA DO-160C environmental requirements

EDMO#

MFR#

CI-105-6 CI-105-7

CI 105-6 CI 105-6

DESCRIPTION CI-105-6 antenna / BNC female CI-106-7 antenna / C female

1.800.235.3300 | edmo.com

147

Antennas

DME Transponder Antennas CI 105-9 DME TRANSPONDER BLADE/ 960 - 1220 MHZ COMANT

EDMO# CI-105-9 MFR# CI 105-9 The CI-105-9 DME transponder blade antenna is encased in a glass-reinforced polyester molded shell and has a twostud mounting configuration. Features a six inch extension coax cable with a female BNC connector.

CI 105-17-L ADS-B TRANSPONDER BLADE/ 960-1220 MHZ, 1030-1020 MHZ, 978 MHZ, 1090 ± 1 MHZ COMANT

EDMO# CI-105-17L MFR# CI-105-17-L Model CI-105-17-L is a single port blade antenna that accommodates the ADS-B mandate by providing both “IN” and “OUT” processing. This antenna can be used for ADS-B, TIS-B, UAT, DME or ATCRBS transponders, as well as Mode S. Lightweight design with a six-hole mounting pattern.

7

weight: height: frequency: weight: height: frequency: VSWR:

4.8 oz 3.23 in 960 - 1220 MHz 1.5:1 maximum (960 – 1220 MHz) 1.3:1 maximum (1025 – 1150 MHz) material: -finish: polyurethane enamel connector: 6” cable with BNC (female) altitude: 70,000 ft airspeed: 400 KTAS at 25,000 ft FAA TSO C66a, C74c mounting: two-hole internal meets RTCA DO-160A environmental requirements

CI 105-16 DME TRANSPONDER BLADE/ 960 - 1220 MHZ

VSWR:

material: finish: connector: altitude: airspeed: FAA TSO

0.3 lb 3.4 in 960 MHz to 1220 MHz 1030 MHz to 1090 MHz 978 MHz 1090 ± 1 MHz 2.0:1 MAX 1.5:1 MAX 1.7:1 MAX 1.5:1 MAX -polyurethane white paint TNC female --TSO-C66c, 960-1215 MHz TSO-C74d, Class A, 1030-1090 MHz TSO-C112e, 1030-1090 MHz TSO-C154c, Class A3, 978 MHz TSO-C166b, Class A, B, 1090 ± 1 MHz six-hole external

mounting: meets RTCA DO 160D requirements RTCA/DO-160G, ENV. CAT.: [F2X]A CE[R(C,C1)H(R)U2(F,F1)S(L)]XSFSXSXXXX[XXX][XX]X[XXXXXX][XX]AXX

COMANT

EDMO# CI-105-16 MFR# CI 105-16 The CI-105-16 DME transponder blade antenna is encased in a glass-reinforced polyester molded shell designed specifically for the Honeywell BendixKing™ KA60. It offers extended length two-stud mounting.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 160D requirements

148

3.2 oz 3.23 in 960 - 1220 MHz 1.5:1 Max 960-1220 MHz 1.3:1 Max 1025-1150 MHz -unpainted white Valox shell BNC (female) 70,000 ft 400 KTAS @ 25,000 ft C66a, C74c two-hole internal

1.800.235.3300 | edmo.com

CI 110 DME TRANSPONDER BLADE/960 1220 MHZ COMANT The CI-110 series antennas are low-profile metal antenna designed for business jet and commercial high-speed aircraft equipped with DME, standard or Mode S transponders. Available with four or six-hole mounting and connector with open or closed path to ground.

weight: height: frequency: VSWR: material: finish: connector:

4 oz 2.25 in 960 - 1220 MHz 1.5:1 maximum -polyurethane enamel C (female)

EDMO DISTRIBUTORS

Antennas

DME Transponder Antennas

altitude: 70,000 ft airspeed: 600 KTAS at 25,000 ft FAA TSO C66c, C74c, C112 (class 1A) mounting: four or six-hole external (see above) meets RTCA DO-160D environmental requirements

EDMO#

MFR#

CI-1104030

CI 110-40-30

CI-1104130

CI 110-41-30

CI-1106030

CI 110-60-30

CI-1106130

CI 110-61-30

CONNECTOR TYPE Four-hole mount, connector with open path to ground Four-hole mount, connector with closed path to ground Six-hole mount, connector with open path to ground Six-hole mount, connector with closed path to ground

COMANT

EDMO# CI-305 MFR# CI 305 The CI-305 is a miniature high-speed DME transponder antenna - one of the smallest available. At 2.75 inches high, it features a very low-drag frontal profile. Strong, lightweight and easy to mount using four external mounting holes through base.

weight: 4.8 oz maximum height: 2.75 in frequency: 960 - 1220 MHz VSWR: 1.8:1 maximum material: -finish: polyurethane enamel connector: BNC (female) altitude: 45,000 ft airspeed: 600 KTAS at 35,000 ft FAA TSO C66b, C74c mounting: four-hole external meets RTCA DO-160A environmental requirements

1030 - 1099 MHz 1.3:1 --BNC (female) 50,000 ft 350 mph C74c one-hole internal

AV-74 DME TRANSPONDER BLADE/960 1220 MHZ RAMI

EDMO# AV-74 MFR# AV-74 The AV-74 is a broadband blade type antenna for transponder or DME application. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The antenna is supplied with a cellular neoprene mounting pad and hardware. Note: AV-74-1 available with longer mounting studs.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

7

CI 305 DME TRANSPONDER BLADE/960 1220 MHZ

frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

3.2 oz 3.4 in 960 - 1220 MHz 1.5:1 maximum acrylonitrile-styrene-acrylic shell enamel BNC (female) 50,000 ft 350 mph C74c, C66c two-hole internal

DME/TRANSPONDER ANTENNA/L-BAND/ BLADE/960-1220 MHZ RAMI

AV-22 DME TRANSPONDER STUB/1030 1099 MHZ RAMI

EDMO# AV-22 MFR# AV-22 The AV-22 is a stub type transponder antenna utilizing its BNC connector for mounting to the airframe. Note: AV-22-1 available with longer mounting body.

weight: height:

EDMO DISTRIBUTORS

1 oz --

EDMO# AV-74-1 MFR# AV-74-1 The AV-74-1 broadband blade type antenna for transponder or DME applications has longer mounting studs for thicker mounting locations. It has an anacrylonitrile-styrene-acrylic (ASA) shell. The antenna comes with a cellular neoprene mounting pad and hardware.

weight: height: frequency: VSWR: material: finish:

3.2 oz 3.4 in 960 - 1220 MHz 1.5:1 maximum anacrylonitrile-styrene-acrylic shell enamel

1.800.235.3300 | edmo.com

149

Antennas

DME Transponder Antennas

connector: altitude: airspeed: FAA TSO mounting:

BNC (female) 50,000 ft 350 mph C74c, C66c two-hole internal

AT-740/A RADAR INTERROGATION/960 1220 MHZ

7

RAMI

EDMO# AT-740/A MFR# AT-740/A The AT-740/A antenna is used for airborne radar interrogation on various fixedwing aircraft. DTL-25707. The antenna is designed to operate at the extreme temperature range of -67° F to 302° F. The antenna is a flush-mounted, cavity-back slot antenna constructed of aluminum with a fiberglass radome. The antenna has a type BNC sampling probe and is protected by an anodic coating to prevent corrosion.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: MIL-A-25707

1 lb -960 - 1220 MHz 1.8:1 maximum (antenna) 1.5:1 maximum (sample probe) fiberglass anodic HN and BNC ---

DM NI50 DME TRANSPONDER BLADE/ 960 - 1220 MHZ ITT/D&M/EDO This low-profile, all-metal blade antenna provides unequaled mechanical strength and built-in reliability. Currently in use on business, commercial, and military aircraft, the DM NI50 antennas have clear advantages including: high side load strength that guards against breakage by ground handling gear, completely sealed construction that prevents failure from moisture intrusion, and lightning protection circuits that prevent damage to the antenna and safeguard electronic equipment. Order by connector type and mounting pattern (see table below).

weight: height: frequency: VSWR:

150

material: finish: connector: altitude: airspeed: FAA TSO

EDMO# DM NI50-2 DMNI50-2-1 DM NI50-3 DM NI50-4 DM NI50-6 DMNI50-9-2 DM NI50-10

--C male, HN male, N male, TNC male --C74, C66a, C112

MFR# NI50-2-2 DMNI50-2-1 DM NI50-3-2 NI50-4-2 DM NI50-6-2 DM NI50-10-2 DM NI50-10-2

CONNECTOR/MOUNTING PATTERN C male, 4-hole 4-hole, color: International Orange C male, 6-hole HN male, 6-hole N male, 6-hole 4-hole N male, 6-hole

DM NI70 DME TRANSPONDER BLADE/960 - 1220 MHZ ITT/D&M/EDO The DM NI70 L Band antennas offer more than sufficient bandwidth (950 to 1220 MHz) for use with civil aviation ATC transponders and distance measuring equipment (DME). The antenna provides omnidirectional, vertically polarized coverage when installed on the top or bottom of an aircraft. Its streamlined shape assures minimum aerodynamic drag. Structurally, the antenna consists of a single metal element. Order by connector type and mounting pattern (see table below).

weight: height: frequency: VSWR:

4 oz -960 - 1220 MHz < 1.7:1 (960 – 1220) < 1.5:1 (1000 – 1100) --C female, BNC female (see note above) --C74b, C66a, C112

material: finish: connector: altitude: airspeed: FAA TSO

EDMO# DM NI70-1 DM NI70-2 DM NI70-3

MFR# NI70-1 NI70-2 DMNI70-3

CONNECTOR/MOUNTING PATTERN C male, 4 –hole BNC male, 4-hole C male, 6-hole

4 oz 2.2 in 960 - 1220 MHz < 1.7:1 (960 – 1220) < 1.5:1 (100 – 1100)

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

Couplers & Diplexers 104-12 TRANSPONDER STUB/ 1030 - 1099 MHZ

AV-547 DUAL VOR/LOC SPLITTER/108 118 MHZ

TED

RAMI

EDMO# 104-12 MFR# 104-12 The TED 104-12 is a stub type transponder antenna utilizing its BNC connector for mounting to the airframe.

≈ 1 oz -1030 - 1099 MHz 1.3:1 --BNC (female) 50,000 ft 350 mph one-hole internal

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.5 oz maximum -108 - 118 MHz 1.4:1 maximum aluminum -3 BNC (female) C34e, C36e, C40c

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

EDMO# AV-547 MFR# AV-547 The AV-547 splitter feeds two VOR receivers from one antenna. The circuitry is enclosed in a durable, lightweight aluminum housing for superior mechanical and environmental stability. The splitter operates at altitudes of up to 50,000 ft.

DM H21-1 DUAL VOR/LOC OR DUAL MARKER BEACON COUPLER/108 - 118 MHZ, 74.74 – 75.25 MHZ

COUPLERS & DIPLEXERS CI 502 DUAL VOR/LOC COUPLER/108 – 118 MHZ COMANT

EDMO# CI-502 MFR# CI 502 The CI-502 is a dual VOR coupler that allows the simultaneous use of two VOR receivers from one VOR antenna. Compact design makes for easy installation.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz 0.88 in 108 – 118 MHz 1.5:1 maximum die cast aluminum aluminum BNC (female) C34c, C36c, C40a

ITT/D&M/EDO

EDMO# DM H21-1 MFR# DM H21-1 Dual VOR/LOC or dual marker beacon will permit operation of two VOR/LOC receivers from one VOR antenna or two marker beacon receivers from one marker beacon antenna. The unit is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz -108 - 118 MHz, 74.74 – 75.25 MHz 1.5:1 2.0:1 aluminum aluminum BNC (female) C34c, C35d, C36d, C40c

Not finding what you need? EDMO carries a wide range of antennas, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

151

Antennas

Couplers & Diplexers CI 503 DUAL GLIDE SLOPE COUPLER/329 – 335 MHZ COMANT

EDMO# CI-503 MFR# CI 503 The CI-503 is a dual glide slope coupler designed to allow the operation of two glide slope receivers from one glide slope antenna. Compact design makes installation easy.

3.2 oz 0.88 in 329 – 335 MHz 1.5:1 maximum die cast aluminum aluminum BNC (female) C34c, C36c, C40a

7

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

DM H24-1 DUAL GLIDE SLOPE COUPLER/329 – 335.3 MHZ

frequency: VSWR: material: finish: connector: FAA TSO

108 – 118 MHz 329 – 335 MHz 1.5:1 maximum die-cast aluminum aluminum BNC (female) C34c, C36c, C40a

AV-571/DUAL VOR COUPLER/SINGLE GLIDE SLOPE DIPLEXER/108 - 118 MHZ, 328 – 335 MHZ RAMI

EDMO# AV-571 MFR# AV-571 The AV-571 diplexer/splitter splits the signal from one VOR antenna to feed one glide slope and two VOR receivers. The diplexer/splitter’s construction and circuitry is enclosed in a durable, lightweight aluminum housing for superior mechanical and environmental stability. Operates at altitudes of up to 50,000 ft.

ITT/D&M/EDO

EDMO# DM H24-1 MFR# DM H24-1 Dual glide slope permits operation of two glide slope receivers from one glide slope antenna. The unit is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz -329 – 335.3 MHz 1.5:1 aluminum aluminum BNC female C34c, C35d, C36d, C40c

CI 505 DUAL VOR COUPLER/SINGLE GLIDE SLOPE DIPLEXER/108 – 118 MHZ, 329 – 335 MHZ

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.5 oz maximum -108 - 118 MHz, 328 – 335 MHz 1.4:1 maximum aluminum -3 BNC (female) C34e, C36e, C40c

DM H23-1/DUAL VOR COUPLER/SINGLE GLIDE SLOPE DIPLEXER/108 - 118 MHZ, 329 – 335.3 MHZ ITT/D&M/EDO

EDMO# DM H23-1 MFR# DM H23-1 Dual VOR and single glide slope permit operation of two VOR and one glide slope receiver from one VOR/LOC antenna. The unit is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection.

COMANT

EDMO# CI-505 MFR# CI 505 The CI-505 is a dual VOR coupler and a single glide slope diplexer that allows the operation of two VOR receivers and one glide slope receiver from one VOR/GS antenna. Compact design makes installation easy.

weight: height:

152

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz -108 - 118 MHz, 329 – 335.3 MHz 1.5:1 aluminum aluminum BNC female C34c, C35d, C36d, C40c

3.2 oz 0.88 in

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

Couplers & Diplexers CI 507 VOR/GLIDE SLOPE DIPLEXER 108 – 118 MHZ, 329 – 335 MHZ COMANT

EDMO# CI-507 MFR# CI 507 Allows the operation of one VOR receiver and one glide slope receiver from one VOR/GS antenna. Compact design makes installation easy.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.2 oz 0.88 in 108 – 118 MHz 329 – 335 MHz 1.5:1 maximum die-cast aluminum aluminum BNC (female) C34c, C36c, C40a

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz -108 - 118 MHz, 329 – 335.3 MHz 1.5:1 aluminum aluminum BNC (female) C34c, C35d, C36d, C40c

CI 509 DUAL MARKER BEACON COUPLER 75 MHZ COMANT

EDMO# CI-509 MFR# CI 509 Dual marker beacon coupler permits the use of two marker beacon receivers from one marker beacon antenna. Compact design makes installation easy.

7

AV-570 VOR/GLIDE SLOPE DIPLEXER 108 – 118 MHZ, 328 – 335 MHZ RAMI

EDMO# AV-570 MFR# AV-570 The AV-570 diplexer splits the signal from one VOR antenna to feed a VOR/LOC and glide slope receiver. The circuitry is enclosed in a durable, lightweight aluminum housing for superior mechanical and environmental stability. Operates at altitudes of up to 50,000 ft.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.5 oz maximum -108 – 118 MHz, 328 – 335 MHz 1.4:1 maximum aluminum -3 BNC (female) C34e, C36e, C40c

DM H22-1 VOR/GLIDE SLOPE DIPLEXER 108 - 118 MHZ, 329 – 335.3 MHZ ITT/D&M/EDO

EDMO# DM H22-1 MFR# DM H22-1 Single VOR and single glide slope will permit operation of one VOR and one glide slope receiver from one VOR antenna. The unit is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection.

EDMO DISTRIBUTORS

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.2 oz 0.88 in 75 MHz 1.5:1 maximum die-cast aluminum aluminum BNC (female) C35d

AV-575 DUAL MARKER BEACON SPLITTER 75 MHZ RAMI

EDMO# AV-575 MFR# AV-575 The AV-575 antenna is a marker beacon antenna splitter allowing two receivers to share the same antenna. A direct replacement for the CI 509.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.2 oz -75 MHz 1.5:1 maximum aluminum -BNC (female) C35d

1.800.235.3300 | edmo.com

153

Antennas

Couplers & Diplexers CI 1114 TRIPLE VOR COUPLER 108 – 118 MHZ COMANT

EDMO# CI-1114 MFR# CI 1114 Coupler provides for use of three VOR receivers from on VOR antenna. Coupler circuitry is housed in stamped enclosure to ensure reliability.

4 oz 0.80 in 108 – 118 MHz 1.5:1 maximum stamped aluminum aluminum BNC (female) C36c, C40a

4 oz 0.75 in 108 – 118 MHz / 329 – 335 MHz 1.5:1 maximum aluminum aluminum BNC (female) C34c, C36c, C40a

AV-585 DUAL VOR/DUAL GLIDE SLOPE DIPLEXER/108 – 118 MHZ / 328 – 336 MHZ RAMI

EDMO# AV-585 MFR# AV-585 The AV-585 antenna is a diplexer/splitter providing two VOR/ LOC and two glide slope outputs from one VOR/LOC/GS antenna.

7

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

CI 1115 TRIPLE VOR/SINGLE GLIDE SLOPE COUPLER/108 - 118 MHZ / 329 - 335 MHZ COMANT

EDMO# CI-1115 MFR# CI 1115 Triple VOR coupler/single glide slope diplexer allows for the operation between three VOR receivers and one glide slope receiver from the same VOR/GS antenna.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

3.2 oz 1.16 in 108 – 118 MHz / 328 – 336 MHz 1.5:1 maximum aluminum gloss coating BNC (female) C34e, C36e, C40e

AV-586 NAV/LOC/GLIDE SLOPE COUPLER 108 – 118 MHZ, 328 – 336 MHZ weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz 0.80 in 108 - 118 MHz / 329 - 335 MHz 1.5:1 maximum stamped aluminum aluminum BNC (female) C34c, C36c, C40a

CI 1125 DUAL VOR/DUAL GLIDE SLOPE DIPLEXER/108 – 118 MHZ / 329 – 335 MHZ COMANT

EDMO# CI-1125 MFR# CI 1125 Dual VOR and dual glide slope diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/glide slope antenna.

154

1.800.235.3300 | edmo.com

RAMI

EDMO# AV-586 MFR# AV-586 The AV-586 antenna coupler is an antenna signal splitter that provides two outputs from a single antenna. The AV-586 is designed to provide the necessary signals to two newer navigational radios that only have one antenna input to receive all three VOR/LOC/GS signals.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO

4 oz 0.99 in 108 – 118 MHz / 328 – 336 MHz 1.40:1 max. aluminum gloss coating BNC (female) C34e, C36e, C40c

EDMO DISTRIBUTORS

Antennas

Couplers & Diplexers AV-587 NAV-LOC-GS, NAV/LOC, GLIDE SLOPE COUPLER

AV-900 SERIES DIPLEXERS

RAMI

The AV-900-series diplexers provide two separate frequency band ports to a multiband FM transceiver from a single-port, multiband antenna. See table below for band specifications.

EDMO# AV-587 MFR# AV-587 The AV-587 antenna coupler is an antenna signal splitter/diplexer that provides three outputs for antennas with only a single output port. One output provides a combined VOR/LOC/GS signal, a second provides a VOR/LOC signal, and a third output provides the GS signal. The AV-587 is designed for aircraft instrument panels that include a newer navigational radio and a second, older navigational radio. Newer radios have only one port to receive all three (VOR/LOC/GS) signals while legacy radios typically have separate inputs for VOR/LOC and GS signals. The AV-587 diplexer provides the necessary signals to both the newer and older radio using a single antenna.

6 oz 0.99 in 108 – 118 MHz / 328 – 336 MHz 1.40:1 maximum aluminum gloss coating BNC (female) C34e, C36e, C40c

AV-590 COM/ANTENNA DUPLEXER SWITCH 118 - 136 MHZ RAMI

EDMO# AV-590 MFR# AV-590 The AV-590 connects two communications radios to one antenna. In the normal, non-switched mode, the AV-590 splits the signal from the antenna equally between two comm radio receivers. When the control voltage is activated by the microphone PTT, the AV-590 switches the antenna to the corresponding radio transmitter and isolates the other receiver.

weight: height: frequency: VSWR: material: finish: connector: FAA TSO:

EDMO DISTRIBUTORS

8 oz 0.88 in 118 – 136 MHz 1.2:1 maximum aluminum gloss coating BNC (female) --

AV-927 weight: height: frequency: VSWR: material: finish: connector: FAA TSO:

EDMO# AV-927 AV-928 AV-929 AV-930 AV-931

6.72 oz 0.99 in see table below 1.3:1 maximum aluminum gloss coating BNC (female) --

MFR# AV-927 AV-928 AV-929 AV-930 AV-931

FREQUENCY

CONNECTOR/ IMPEDANCE

136-174 MHz, 380-520 MHz 136-174 MHz, 760-870 MHz 136-174 MHz, 760-870 MHz 136-174 MHz, 380-870 MHz 118-137 MHz, 150-174 MHz

7

weight: height: frequency: VSWR: material: finish: connector: FAA TSO:

RAMI

BNC / 50 Ohms BNC / 50 Ohms BNC / 50 Ohms TNC / 50 Ohms BNC / 50 Ohms

DM H69-1 DUAL VOR/DUAL GLIDE SLOPE DIPLEXER/108 - 118 MHZ / 329 – 335.3 MHZ ITT/D&M/EDO

EDMO# DM H69-1 MFR# DM H69-1 The DM H69-1 has the ability to operate dual VORs and dual glide slope receivers from one VOR antenna. The unit is housed in an aluminum case and all circuit components are fully encapsulated for vibration protection as well as waterproof protection.

weight: height: frequency: VSWR: material: finish: connector: MIL-E-5400

4 oz -108 - 118 MHz / 329 – 335.3 MHz 2.0:1 aluminum gloss coating BNC (female)

1.800.235.3300 | edmo.com

155

Antennas

Marker Beacon Antennas CI 5120 DUAL VOR/LOC/GS SPLITTER/108 – 118 MHZ / 329 – 335 MHZ COMANT

EDMO# CI-5120 MFR# CI 5120 Designed for use with Garmin GNS 580 and similar systems. The CI 5120 splits single coax antenna input into equally proportioned VOR/LOC/GS outputs, allowing you to run two single input receivers off of one antenna.

1.6 oz 0.97 in 108 – 118 MHz / 329 – 335 MHz 1.5:1 maximum aluminum aluminum BNC (female)

7

weight: height: frequency: VSWR: material: finish: connector:

MARKER BEACON ANTENNAS

CI 118 MARKER BEACON/75 MHZ COMANT

EDMO# CI-118 MFR# CI 118 Designed specifically for high-performance aircraft applications, featuring aerodynamic design in a lightweight package. The low profile blade type antenna is encased in a molded polyurethane shell. –– Skydrol and rain erosion resistant

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 138 requirements

8 oz 3.69 in 75 MHz 1.5:1 -polyurethane enamel BNC (female) 45,000 ft 400 KTAS @ 25,000 ft C35d, Class A three-hole internal

CI 118-1 MARKER BEACON/75 MHZ COMANT

CI 102 MARKER BEACON/75 MHZ COMANT

EDMO# CI-102 MFR# CI 102 Designed for use with the modern, high sensitivity marker beacon receivers. Small and lightweight, they feature four-hole internal mounting for simple installation. Antenna assembly is enclosed in an injection-molded radome that is impervious to the tough environments typical of the underside of an aircraft. DC grounded to minimize accumulation of precipitation static. –– Skydrol and rain erosion resistant

weight: 9.6 oz height: 2.15 in frequency: 75 MHz VSWR: 1.5:1 maximum / return loss -13.98 dB material: -finish: polyurethane enamel connector: BNC (female) altitude: 45,000 ft airspeed: 400 KTAS @ 25,000 ft FAA TSO C35d, class A mounting: four-hole internal meets RTCA DO 138, DO 143, and 160A requirements

156

1.800.235.3300 | edmo.com

EDMO# CI-118-1 MFR# CI 118-1 Low drag, lower profile alternative to the popular CI 102 “boat style” marker beacon antenna. Approved for medium to high performance single, turboprop or jet aircraft and provides simple external mounting. DC grounded to minimize accumulation of precipitation static. –– Skydrol and rain erosion resistant

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 138 requirements

8 oz 2.4 in 75 MHz 1.5:1 -polyurethane enamel BNC (female) 45,000 ft 400 KTAS @ 25,000 ft C35d, Class A four-hole external

EDMO DISTRIBUTORS

Antennas

Marker Beacon Antennas CI 118-9 MARKER BEACON/75 MHZ

AV-64 MARKER BEACON/75 MHZ

COMANT

RAMI

EDMO# CI-118-9 MFR# CI 118-9 Identical to the CI 118 except the mounting configuration allows for “drop-in” replacement to the Honeywell Bendix-King KA 26 Marker Beacon. This design has been tested to the tough DO-160D environmental standards. DC grounded to minimize accumulation of precipitation static. –– Skydrol and rain erosion resistant

10.4 oz 2.69 in 75 MHz 1.5:1 molded rigid foam polyurethane enamel BNC 45,000 ft 400 kts TAS @ 25,000 ft C35d, Class A two-hole internal

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

8 oz 2.2 in 75 MHz 1.4:1 maximum rigid urethane foam acrylonitrile-styrene- acrylic BNC (female) 50,000 ft 350 mph C35d two-hole internal

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 160-D requirements

EDMO# AV-64 MFR# AV-64 The AV-64 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrite-styrene-acrylic (ASA) shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. The antenna is supplied with cellular neoprene mounting pad and hardware.

AV-569 MARKER BEACON/75 MHZ RAMI

CI 118-10 MARKER BEACON/75 MHZ COMANT

EDMO# CI-118-10 MFR# CI 118-10 Identical to the CI 118 but with a four-hole, through mount configuration. The CI 118-10 Marker Beacon Antenna has been tested to the tough DO-160D environmental standards. DC grounded to minimize accumulation of precipitation static. –– Skydrol and rain erosion resistant

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 138 requirements

EDMO DISTRIBUTORS

12.8 oz 2.90 in 75 MHz 1.7:1 molded radome polyurethane paint BNC (female) 45,000 ft 400 kts TAS @ 25,000 ft C35d, Class A four-hole external

EDMO# AV-569 MFR# AV-569 The AV-569 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrile-styrene- acrylic shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. It is supplied with cellular neoprene mounting pad and hardware.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

6.25 oz 2.5 in 75 MHz 1.6:1 maximum rigid urethane foam acrylonitrile-styrene- acrylic BNC (female) 50,000 ft 350 mph C35d two-hole internal

Not finding what you need? EDMO carries a wide range of antennas, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need.

1.800.235.3300 | edmo.com

157

Antennas

Glide Slope Antennas AT-640A/ARN MARKER BEACON/75 MHZ RAMI

7

EDMO# AT-640 MFR# AT-640A/ARN The AT-640A/ARN antenna is a receive-only VHF marker beacon antenna used on both fixed-wing and rotary-wing aircraft. The antenna will meet the requirements of MilSpec MIL-A-5999 for electrical and environmental performance. The antenna is finished with a white Skydrol resistant polyurethane paint in accordance with MilSpec MIL-PRF-85285. The antenna has an operating temperature of -40° F to 160° F and experiences a drag force of 0.22 lb at airspeeds of 400 mph. Precipitation static is minimized through the use of a foam-filled fiberglass construction. The foam also reduces the effects of vibration, shock, and temperature extremes.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

16 oz 2.5 in 75 MHz 1.5:1 maximum foam and fiberglass Skydrol-resistant polyurethane paint C (female) -400 mph eight-hole internal

DM N27 SERIES MARKER BEACON 74.75 - 75.25 MHZ ITT EXELIS The DM N27 series marker beacon antennas are rugged and lightweight. Constructed with water-resistant dielectric foam-filled, white polyester-fiberglass DM N27-1 radomes. The Skydrol-resistant housings are fitted with metal leading edges for erosion protection. Designed to meet the performance specifications of antennas AT-134 and AT-536.

EDMO# DM N27-1/A DM N27-2 DM N27-3

MFR# N27-1/A N27-2 N27-3

DESCRIPTION DM N27-1/A antenna / TNC connector DM N27-2 antenna / C connector DM N27-3 antenna / BNC connector

DM N43-1 MARKER BEACON/75 MHZ ITT EXELIS

EDMO# DM N43-1 MFR# N43-1 The DM N43 series marker beacon antennas are low silhouette antennas. Electrical elements of the antenna are completely sealed by foamed-in-place resin within a plastic housing. As a result, the antennas are rugged enough for use on all subsonic aircraft.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 138 requirements

16 oz 2.90 in 75 MHz 1.7:1 molded radome polyurethane paint BNC (female) 45,000 ft 400 kts TAS @ 25,000 ft C35d six-hole external

GLIDE SLOPE ANTENNAS CI 193 GLIDE SLOPE/329 - 335 MHZ COMANT

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: MIL-T-5422E

158

10 oz 1.25 in 74.75 - 75.25 MHz <1.5:1 (at midband) <5.0:1 (74.8-75.2 MHz) Dielectric foam filled fiberglass housing with metal leading edge -TNC female (DM N27-1/A), C female (DM N27-2), BNC female (DM N27-3) --C35c three-hole internal

1.800.235.3300 | edmo.com

EDMO# CI-193 MFR# CI 193 Half wave dipole designed for interior mounting for GS reception. Integral ferrite balun can result in improved performance when propeller modulation is a problem.

weight: height: frequency: VSWR: material: finish:

8 oz maximum 0.75 in 329 - 335 MHz 2.5:1 max, 329 – 335 MHz (GS) Delrin housing / brass radiators black / nickel

EDMO DISTRIBUTORS

Antennas

GPS, XM & Iridium Antennas

connector: BNC altitude: -airspeed: -FAA TSO C34c mounting: Internal mount meets RTCA DO-192 and DO-16 requirements

DM N25-X GLIDE SLOPE/329 – 335.3 MHZ ITT EXELIS

weight:

8 oz (DM N25-1) 14 oz (DM N25-2) 8 oz (DM N25-3) -329 – 335.3 MHz 5.0:1 (DM N25-1) 3.0:1 (DM N25-2) aluminum -TNC female (DM N25-1) C female (DM N25-2) N female (DM N-25-3) --C34b

height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO MIL-T-5422E

EDMO# DM N25-1 DM N25-2 DM N25-3

MFR# DM N25-1 DM N25-2 DM N25-3

DESCRIPTION DM N25-1 antenna / TNC connector DM N25-2 antenna / C connector DM N25-3 antenna / N connector

EDMO DISTRIBUTORS

CI 401-220 GPS ANTENNA/1575.42 MHZ COMANT

EDMO# CI-401-220 MFR# CI 401-220 The CI 401-220 is a stand-alone GPS antenna that matches the standard ARINC footprint found on many twins and business jets. Designed to operate with 26.5 dB panel mount GPS receivers. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. Not compatible with most portable GPS receiver systems.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 160D requirements

6.2 oz -1575.42 MHz / 26.5 dB Gain 1.5:1 maximum --TNC (female) --DO 160-D / C 144 four-hole external

7

The DM N25 Series of glide slope antennas use a grounded, center-fed loop as the radiating element, which produces symmetrical radiation patterns. This antenna is a dual connector that incorporates a hybrid; its circuitry effectively isolates the two associated receiving systems providing protection against disablement of both systems in the event of failure in one system. The radiation pattern associated with each DM N25-2 antenna port is identical, so that no coupler dropout problem occurs during automatic DM N25-2 landing. All DM N25 Series antennas provide complete lightning protection for the associated receivers. They are suitable for mounting either externally, or within a nose radome.

GPS, XM & IRIDIUM ANTENNAS

CI 401-221 GPS ANTENNA/1575.42 MHZ COMANT

EDMO# CI-401-221 MFR# CI 401-221 The CI 401-221 is a stand-alone GPS antenna that matches the standard ARINC footprint found on many twins and business jets. Designed to operate with Garmin 17.0 dB gain panel mount GPS receivers. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. Not compatible with most portable GPS receiver systems.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 160D requirements

6.2 oz -1575.42 MHz / 17.0 dB Gain 1.5:1 maximum --TNC (female) --DO 160-D / C 144 four-hole external

1.800.235.3300 | edmo.com

159

Antennas

GPS, XM & Iridium Antennas CI 401-460 GPS/XM ANTENNA/1575.42 MHZ COMANT

7

EDMO# CI-401-460 MFR# CI 401-460 The CI-401-460 is a multifunction GPS and XM Weather antenna. Designed for compatibility with panel mount 26.5 dB gain GPS receivers. Conforms to the popular ARINC footprint, standard on many twin turboprop and business jets. Certified for GPS and GPS WAAS Class Gamma 1 equipment. Not compliant for GPS WAAS Class Gamma 2 and 3 applications.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO 160D requirements

6.5 oz -1575.42 MHz / 26.5 dB Gain 1.5:1 maximum --TNC Blue (GPS), TNC (XM) --C144 four-hole external

CI-401-490 IRIDIUM ANTENNA/1616.0 1626.5 MHZ COMANT

EDMO# CI-401-490 MFR# CI-401-490 The CI-401-490 is a low profile, iridium-only antenna. Narrow-band tuning provides optimum iridium performance. Many aviation antennas must go “wide-band” to capture the nearby GPS frequency for FAA TSO, which reduces efficiency. The CI401-490 has an aviation patch which has earned the FAA TSO C159a for satellite communication. Designed for both fixed wing and rotorcraft airframes, and operating with both Iridium-based voice and data communications devices, the single channel aviation patch provides continuous coverage from 1616.0 MHz to 1626.5 MHz for excellent Iridium operation. Manufactured to standard aviation ARINC 743 footprint with injection-molded radome, aircraft aluminum base plate and integral Nitrile “O” ring.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO

160

6.2 oz .90 in 1616.0 MHz - 1626.5 MHz, +3.0 dBic @ Zenith 1.5:1 maximum injection-molded radome -TNC (female) --C159a satellite communication

1.800.235.3300 | edmo.com

mounting:

four-hole external

CI 420-1 XM ANTENNA/2332.5 – 2345.0 MHZ COMANT

EDMO# CI-420-1 MFR# CI 420-1 The CI-420-1 is an XM Weather antenna. Designed to operate with popular Heads Up XM Weather Data Systems. Conforms to the popular teardrop footprint, standard on many general aviation aircraft and business jets.

weight: 4.2 oz height: -frequency: 2332.5 – 2345.0 MHz / 26-30 dB Gain VSWR: 1.5:1 maximum material: -finish: -connector: XM - SMA altitude: -airspeed: -mounting: four-hole external meets RTCA DO 160D requirements

CI 420-10 XM ANTENNA/2332.5 – 2345.0 MHZ COMANT

EDMO# CI-420-10 MFR# CI 420-10 The CI-420-10 XM Weather antenna is designed for the Garmin GDL 69/69A receivers and Heads Up Technologies (HUT) receivers with short coaxial cable runs. Conforms to the popular teardrop footprint standard on many general aviation aircraft and business jets. Used on most aircraft up to and including business jets.

weight: 4.2 oz height: N/A frequency: 2332.5 – 2345.0 MHz / 25dB +/- 2dB Gain VSWR: 1.5:1 maximum material: -finish: -connector: XM - TNC (female) altitude: -airspeed: -mounting: four-hole external meets RTCA DO-160D requirements

EDMO DISTRIBUTORS

Antennas

GPS, XM & Iridium Antennas CI 420-16 XM ANTENNA/2332.5 – 2345.0 MHZ COMANT

EDMO# CI-420-16 MFR# CI 420-16 The CI-420-16 XM Weather antenna is designed for Heads Up Technologies (HUT) receivers with longer coaxial cable runs. Features a robust TNC female connector. Conforms to the popular teardrop footprint standard on many general aviation aircraft and business jets.

CI 420-220 GPS ANTENNA/1575.42 MHZ COMANT

EDMO# CI-420-220 MFR# CI 420-220 The CI-420-220 is a stand-alone GPS antenna that matches the popular teardrop footprint found on many general aviation aircraft and business jets. Designed to operate with 26.5 dB panel mount GPS receivers. Not compliant for GPS WAAS Class Gamma 2 and 3 applications. Not compatible with most portable GPS receiver systems.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO

4.2 oz -1575.42 MHz / 26.5 dB Gain 1.5:1 maximum --TNC (female) --C144 for GPS and GPS WAAS Class Gamma 1 equipment mounting: four-hole external meets RTCA DO 160D requirements

EDMO DISTRIBUTORS

COMANT

EDMO# CI-420-221 MFR# CI 420-221 The CI-420-221 is a stand-alone GPS antenna that matches the popular teardrop footprint found on many general aviation aircraft and business jets. Designed to operate with Garmin 17.0 dB panel mount GPS receivers. Not compatible with most portable GPS receiver systems.

weight: 4.2 oz height: -frequency: 1575.42 MHz / 17.0 dB VSWR: 1.5:1 maximum material: -finish: -connector: TNC (female) altitude: -airspeed: -FAA TSO C144 mounting: four-hole external meets RTCA DO 160D requirements

7

weight: 4.2 oz height: N/A frequency: 2332.5 – 2345.0 MHz / 26-30 dB Gain VSWR: 1.5:1 maximum material: -finish: -connector: XM - TNC (female) altitude: -airspeed: -mounting: four-hole external meets RTCA DO-160D requirements

CI 420-221 GPS ANTENNA/1575.42 MHZ

CI 420-420 GPS/XM ANTENNA/1575.42 +/- 10.23 MHZ COMANT

EDMO# CI-420-420 MFR# CI 420-420 The CI-420-420 is a multifunction GPS and XM Weather antenna. Designed for compatibility with panel mount 26.5 dB gain GPS receivers. Conforms to the popular teardrop footprint standard on many general aviation aircraft and business jets.

weight: height: frequency:

8.5 oz -GPS 1575.42 MHz / 26.5 dB Gain XM 2332.5-2345.0 / 30-34 dB Gain VSWR: 1.5:1 maximum material: -finish: -connector: GPS - TNC / XM - TNC altitude: -airspeed: -FAA TSO C190 mounting: four-hole external meets RTCA DO 160E requirements

1.800.235.3300 | edmo.com

161

Antennas

GPS, XM & Iridium Antennas CI 420-490 IRIDIUM ANTENNA/ 1616.0 1626.5 MHZ COMANT

7

EDMO# CI-420-490 MFR# CI 420-490 The CI-420-490 is a low profile Iridium-only antenna. Narrow-band tuning provides optimum iridium performance. Many aviation antennas must go “wide-band” to capture the nearby GPS frequency for FAA TSO, which reduces efficiency. The CI420-490 has an aviation patch which has earned the FAA TSO C159a for satellite communication. Designed for both fixed wing and rotorcraft airframes, and operating with both Iridium-based voice and data communications devices, the single channel aviation patch provides continuous coverage from 1616.0 MHz to 1626.5 MHz for excellent Iridium operation. Popular teardrop footprint with injection-molded radome and aircraft aluminum base plate.

weight: 5.0 oz height: .72 in frequency: 1616.0 MHz - 1626.5 MHz, +3.0 dBic @ Zenith VSWR: 1.5:1 maximum material: injection-molded radome finish: -connector: TNC (female) altitude: -airspeed: -FAA TSO C159a satellite communication mounting: four-hole external meets RTCA DO-160 G requirements

CI 428-200 GPS WAAS ANTENNA/1575.42 MHZ (GPS) / 26.5 DB GAIN COMANT

EDMO# CI-428-200 MFR# CI 428-200 The CI-428-200 is designed specifically to meet the GPS WAAS Gamma 3 specifications required by the Garmin G1000 system. Matches the standard ARINC footprint found on many twins and business jets. Meets RTCA DO 160D operating standards including direct effects lightning. Gamma 3 WAAS allows for primary navigation using GPS for all phases of flight including precision LPV approaches. Not compatible with portable GPS receiver units.

weight: height: frequency: VSWR: material: finish: connector: altitude:

162

6.2 oz N/A 1575.42 MHz (GPS) / 26.5 dB Gain 1.5:1 maximum --TNC (female) --

1.800.235.3300 | edmo.com

airspeed: -FAA TSO C144 mounting: four-hole external meets RTCA DO 160D requirements

CI 428-410 GPS WAAS/XM ANTENNA 1575.42 MHZ / 26.5 DB GAIN (GPS) 2332.5 – 2345.0 / 24 DB GAIN (XM) COMANT

EDMO# CI-428-410 MFR# CI 428-410 The CI-428-410 is a multifunction GPS and XM Weather antenna designed specifically to meet the GPS WAAS Gamma 3 specifications required by the Garmin G1000 system. Enables primary navigation using GPS WAAS, including terminal navigation and approach to landing. XM Weather antenna is designed for low gain systems such as the Garmin GDL-69/69A or Heads Up systems with shorter coax runs. Conforms to the popular ARINC footprint, standard on many twin turboprops and business jets.

weight: height: frequency:

6.2 oz -1575.42 MHz / 26.5 dB Gain (GPS) 2332.5 – 2345.0 / 25 dB Gain (XM) VSWR: 1.5:1 maximum material: -finish: -connector: TNC (female) altitude: -airspeed: -FAA TSO C144 CI-429-200 CI-429-200 mounting: four-hole external meets RTCA DO 160D requirements

CI 429-200 GPS WAAS ANTENNA /1575.42 MHZ / 26.5 DB GAIN COMANT

EDMO# CI-429-200 MFR# CI 429-200 The CI-429-200 is an FAA TSO’d GPS antenna certified to the C190 WAAS requirements. Using the popular ARINC 743 footprint, this WAAS GPS antenna operates with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. Manufactured with a tough, Skydrol-resistant radome and nickel plated aluminum base plate, comes standard with a Nitrile “O” ring for positive sealing to the aircraft skin. Not compatible with hand-held GPS systems.

EDMO DISTRIBUTORS

Antennas

GPS, XM & Iridium Antennas

weight: 7.73 oz height: 0.57 in frequency: 1575.42 MHz / 26.5 dB Gain VSWR: 1.5:1 maximum material: Skydrol-resistant radome finish: nickel-plated aluminum connector: TNC (female) altitude: -airspeed: -FAA TSO C190 mounting: four-hole external meets RTCA DO 160E requirements

CI 429-410 GPS WAAS/XM ANTENNA 1575.42 MHZ/ 26.5 - 32.5 DB GAIN (GPS) 2332.5 - 2345.0 MHZ/ 25.0 DB GAIN (XM) COMANT

weight: height: frequency:

8.5 oz -1575.42 MHz/ 26.5 - 32.5 dB Gain (GPS) 2332.5 - 2345.0 MHz/ 25.0 dB Gain (XM) VSWR: 1.5:1 maximum material: nickel-plated aluminum finish: Skydrol-resistant coating connector: GPS TNC / XM TNC altitude: -airspeed: -FAA TSO C190 mounting: four-hole external meets RTCA DO 160E requirements

Not finding what you need? EDMO carries a wide range of antennas, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need.

EDMO DISTRIBUTORS

COMANT

EDMO# CI-490-490 MFR# CI 490-490 The ComDat CI 490-490 is a high performance Iridium band antenna that meets the FAA’s TSO standard C159a. Intended for use with Iridium systems on most aircraft up to and including business jets for applications including airborne Iridium based telephony, email, asset tracking, or safety services. Designed with a round-format footprint.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160G

6.2 oz -1616-1626.5 MHz 1.5:1 maximum -gloss white paint TNC -330 KIAS @ sea level C159a four-hole external

7

EDMO# CI-429-410 MFR# CI 429-410 The CI-429-410 is an FAA TSO’d GPS/XM antenna certified to C190 WAAS requirements. Using the popular ARINC 743 footprint, this WAAS GPS antenna will operate with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. The XM portion of the antenna will operate with popular panel mounted systems from Garmin and Heads Up. Manufactured with a tough, Skydrol resistant radome and nickel plated aluminum base plate, comes standard with a Nitrile “O” ring for positive sealing to the aircraft skin.

CI 490-490 IRIDIUM SATCOM ANTENNA/ 1616 – 1626.5 MHZ

AV-GPS GPS ANTENNA/1575 MHZ RAMI

EDMO# AV-GPS MFR# AV-GPS The AV-GPS is a GPS antenna designed for use with GPS receivers that provide +5 volts DC on their antenna connector. It is an active (amplified) antenna providing an average of 26 dB gain over a passive (non-amplified) antenna.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

8 oz maximum 0.75 in 1575 MHz 1.2:1 --TNC 50,000 ft 250 mph four-hole external

1.800.235.3300 | edmo.com

163

Antennas

Radio Altimeter Antennas AV-801 WAAS GPS ANTENNA 1575.42 - 10.23 MHZ, 50 OHMS RAMI

7

EDMO# AV-801 MFR# AV-801 The AV-801 WAAS GPS antenna is suited to applications as a position reporting antenna source for ADS-B compliance and can also be used in other GPS functions. This antenna meets FAA TSO-C190 specifications and has met the requirements of RTCA DO301 and DO-160G in qualification testing. The AV-801 matches the ARINC 743A standard found on many general aviation aircraft.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO: mounting: meets RTCA DO-301 requirements

EDMO# DM PN3-3/A DM PN3-4/A

MFR# PN3-3/A PN3-4/A

DESCRIPTION Flat surface antenna face Curved 71.5 in radius antenna face

ITT/D&M/EDO

5 oz -1575.42 +/- 10.23 MHz 1.5:1 Max -white TNC female --C190 four-hole external

RADIO ALTIMETER ITT/D&M/EDO Dielectric foam filled, lightweight, flush, broad-beamed horn type antennas. By controlling side lobes and reducing surface currents, the antennas provide very high isolation, which exceeds 85 dB at a center-to-center separation of only 20”, when used in pairs.

164

-C87

RADIO ALTIMETER

RADIO ALTIMETER ANTENNAS

weight: height: frequency: VSWR: material: finish: connector: altitude:

airspeed: FAA TSO

EDMO# DMPN19-1-1 MFR# PN19-1-1 The DM PN19-1-1 uses micro strip technology to provide an extremely low-profile antenna. This fully functional antenna was developed to be a high quality, low-cost, lightweight, and near conformal antenna. The dielectric insert and radiating elements are recessed into a complete four-sided metal housing. This design feature protects the dielectric surface from the air stream for increased erosion protection in addition to preventing water intrusion and delamination.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO MIL-E-5400

5 oz 2.75 in 4200 - 4400 MHz <2.0:1 4200 – 4400 MHz max <1.8:1 4275 – 4325 MHz max metal -TNC female 1,000 – 70,000 ft -C87

1.25 lb 2.75 in 4200 - 4400 MHz ---TNC female --

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

FM Antennas

FM ANTENNAS

meets RTCA DO-138 requirements

CI 177 FM WHIP/148 - 174 MHZ COMANT

EDMO# CI-177 MFR# CI 177 Designed for use over the public service FM frequency band. The CI-177 is a whip antenna with the radiating element enclosed in a high strength tapered glass laminate housing and die-cast aluminum base.

8 oz 14.5 in 148 - 174 MHz 2.5:1 die-cast housing / fiberglass whip polyurethane enamel BNC (female) 30,000 ft 450 KTAS C37b, C38b four-hole external

COMANT

EDMO# CI-177-3 MFR# CI 177-3 Designed for use over the public service FM Frequency band. The CI-177-3 is a whip antenna with the radiating element enclosed in a high-strength tapered glass laminate housing and die-cast aluminum base.

7

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-138 requirements

CI 177-3 FM WHIP/148 - 174 MHZ

weight: 8 oz height: 14.5 in frequency: 148 - 174 MHz VSWR: 2.5:1 material: die-cast housing / fiberglass whip finish: polyurethane enamel connector: BNC (female) altitude: 30,000 ft airspeed: 450 KTAS FAA TSO C37b, C38b mounting: three-hole external meets RTCA DO-138 requirements

CI 177-1 FM WHIP/EXTENDED BAND 138 - 174 MHZ COMANT

EDMO# CI-177-1 MFR# CI 177-1 Designed as an extended band version of the CI 177 for use over the public service FM frequency band. The CI-177-1 is a whip antenna with the radiating element enclosed in a high-strength tapered glass laminate housing and die-cast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO DISTRIBUTORS

8 oz 15.3 in 138 - 174 MHz 3.0:1 die-cast housing / fiberglass whip polyurethane enamel BNC (female) 30,000 ft 450 KTAS C37b, C38b four-hole external

CI 177-13 FM WHIP/EXTENDED BAND 138 - 174 MHZ COMANT

EDMO# CI-177-13 MFR# CI 177-13 Designed as an extended band antenna for use over the public service FM frequency band. The CI-177-13 is a whip antenna with the radiating element enclosed in a high-strength tapered glass laminate housing and die-cast aluminum base.

weight: height: frequency: VSWR: material: finish: connector: altitude:

8 oz 14.5 in 138 - 174 MHz 3.0:1 die-cast housing / fiberglass whip polyurethane enamel BNC female 30,000 ft

1.800.235.3300 | edmo.com

165

Antennas

FM Antennas

airspeed: FAA TSO mounting: meets RTCA DO-138 requirements

450 KTAS C37b, C38b three-hole external

mounting:

four-hole external

CI 292-3 BENT WHIP/FM EXTENDED BAND 138-174 MHZ CI 222 BENT WHIP/AM-FM 88-108 MHZ 550-1600 KHZ COMANT

EDMO# CI-292-3 MFR# CI 292-3 The CI-292-3 is an extended band FM antenna. Features a highstrength die-cast aluminum base with tapered stainless steel bent whip radiating element suitable for bottom mounting.

7

EDMO# CI-222 MFR# CI 222 The CI-222 is a receive-only AM/FM antenna that offers a unique low profile design. Its bent whip configuration is ideally suited for underbelly and helicopter installations.

COMANT

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

8 oz 5.5 in 88 - 108 MHz 550 – 1600 KHz 3.5:1 maximum @ 98 MHz mid-band 3.0:1 maximum @ 88 & 108 edges die-cast zinc housing / stainless whip polyurethane enamel BNC (female) 20,000 450 KTAS three-hole external

CI 222-1 BENT WHIP/FM 88-108 MHZ COMANT

EDMO# CI-222-1 MFR# CI 222-1 The CI-222-1 is a receive-only FM antenna that offers a unique low profile design. Its bent whip configuration is ideally suited for underbelly and helicopter installations.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed:

166

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

9.6 oz 9.5 in 138 - 174 MHz 136 – 174 MHz 2.5:1 @ 138-174 MHz 3.0:1 @ 136-174 MHz die-cast housing / stainless whip polyurethane enamel BNC (female) 50,000 ft 250 KTAS at 25,000 ft C37c (Class 1), C38c three-hole external

AV-535 BENT WHIP/FM EXTENDED BAND 138-174 MHZ RAMI

EDMO# AV-535 MFR# AV-535 The AV-535 is a bent whip type antenna that operates in the public service and business bands; suitable for belly mounting. Rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 292-3. 8 oz 8.5 in 88 - 108 MHz 3.0:1 maximum die-cast zinc housing / stainless whip polyurethane enamel BNC (female) 20,000 450 KTAS

1.800.235.3300 | edmo.com

weight: height: frequency: VSWR: material: finish: connector: altitude:

8 oz 9.81 in 138 - 174 MHz 3.0:1 Max -gloss white BNC (female) 50,000 ft

EDMO DISTRIBUTORS

Antennas

UHF L Band Radiophone Antennas

airspeed: mounting:

350 mph three-hole external

FAA TSO mounting:

C37d, C38d four-hole external

CI 292-4 WHIP/FM EXTENDED BAND 138-174 MHZ COMANT

EDMO# CI-292-4 MFR# CI 292-4 The CI-292-4 is designed as an extended band FM antenna. Features a highstrength die-cast aluminum base with tapered stainless steel whip radiating element.

VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160D requirements

9.6 oz 14.5 in 138 - 174 MHz 136 – 174 MHz 2.5:1 @ 138-174 MHz 3.0:1 @ 136-174 MHz die-cast housing / stainless whip polyurethane enamel BNC (female) 50,000 ft 250 KTAS at 25,000 ft C37c (Class 1), C38c three-hole external

AV-14 WHIP/FM 138-174 MHZ RAMI

EDMO# AV-14 MFR# AV-14 The AV-14 is a whip antenna that has a glass laminate housing and die-cast aluminum base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins. The antenna is designed to operate in the FM Public Service and Business Bands.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed:

EDMO DISTRIBUTORS

8 oz 17.5 in 138 - 174 MHz 2.0:1 maximum --BNC (female) 50,000 ft 350 mph

UHF RADIOPHONE STUB/450-470 MHZ COMANT

EDMO# CI-106 MFR# CI 106 The CI-106 is a UHF radiophone stub antenna designed to withstand the environment associated with the underside of an aircraft. Antenna radiator is mechanically captivated and sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

7

weight: height: frequency:

UHF L BAND RADIOPHONE ANTENNAS

2.88 oz 7 in 450-470 MHz 1.7:1 nickel plated brass tin-nickel alloy BNC female -250 knots TAS one-hole internal

UHF RADIOPHONE MINI WHIP/ 450-470 MHZ COMANT

EDMO# CI-177-20 MFR# CI 177-20 The CI-177-20 is a UHF radiophone mini whip antenna particularly well suited to the harsh environments experienced on the underside of an aircraft. Features die-cast metal base and radiator encased in glass laminate housing.

weight: height: frequency:

11.2 oz 7 in 450 – 470 MHz

1.800.235.3300 | edmo.com

167

Antennas

UHF L Band Radiophone Antennas

VSWR: material: finish: connector: altitude: airspeed: mounting: meets RTCA DO-160D requirements

2.0:1 die cast metal base polyurethane paint BNC female 30,000 ft 450 knots TAS @ 25,000 ft four-hole external

finish: connector: altitude: airspeed: mounting:

tin/nickel alloy BNC female -250 knots TAS @ 25,000 ft one-hole internal

UHF RADIOPHONE STUB/403-512 MHZ COMANT

UHF RADIOPHONE MINI WHIP/ 450-470 MHZ

7

COMANT

EDMO# CI-200 MFR# CI 200 The CI-200 is a UHF radiophone mini whip antenna particularly well suited to the harsh environments experienced on the underside of an aircraft. Features die cast metal base and radiator encased in glass laminate housing.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

8 oz 6.125 in 450 – 470 MHz 1.5:1 aluminum alloy / fiberglass whip polyurethane enamel BNC female 30,000 ft 450 knot TAS @ 25,000 ft three-hole external

UHF RADIOPHONE STUB/400-430 MHZ COMANT

EDMO# CI-271 MFR# CI 271 The CI-271 is UHF radiophone stub antenna designed to withstand the environment associated with the underside of an aircraft. Antenna radiator is mechanically captivated and sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service.

weight: height: frequency: VSWR: material:

168

2.88 oz 7 in 400 - 430 MHz 1.8:1 maximum nickel plated brass

1.800.235.3300 | edmo.com

EDMO# CI-273 MFR# CI 273 The CI-273 is UHF radiophone stub antenna designed to withstand the environment associated with the underside of an aircraft. Antenna radiator is mechanically captivated and sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service.

weight: height: frequency: VSWR:

material: finish: connector: altitude: airspeed: mounting:

2.88 oz 7 in 403 - 512 MHz 3.0:1 @ 403 to 512 MHz 3.0:1 @ 403 to 430 MHz 2.0:1 @ 403 to 470 MHz 3.0:1 @ 470 to 512 MHz nickel plated brass tin-nickel alloy BNC female -250 knots TAS @ 25,000 ft one-hole internal

UHF RADIOPHONE BLADE/406-512 MHZ COMANT The CI-275 series UHF radiophone blade antennas are designed for high-performance aircraft over the full frequency range of 406-512 MHz. The antenna is encased in a low height, low drag, and lightweight molded body to ensure high reliability.

weight: height: frequency: VSWR: material: finish:

8 oz 3.5 in 406 - 512 MHz 2.0:1 nickel plated polycarbonate

EDMO DISTRIBUTORS

Antennas

UHF L Band Radiophone Antennas

connector:

CI-275 BNC, CI-275-2 TNC, CI-275-5 N 50,000 ft 600 knots TAS @ 25,000 ft four-hole external

altitude: airspeed: mounting:

EDMO#

MFR#

CI-275 CI-275-2 CI-275-5

CI 275 CI 275-2 CI 275-5

DESCRIPTION BNC female TNC female N female

UHF RADIOPHONE BLADE/400-960 MHZ COMANT

EDMO# CI-306 MFR# CI 306 The CI-306 is a UHF radiophone stub antenna designed to withstand the environment associated with the underside of an aircraft. Antenna radiator is mechanically captivated and sealed against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service.

EDMO DISTRIBUTORS

UHF L BAND RADIOPHONE BLADE/ 806-960 MHZ/1030 – 1090 MHZ COMANT

7

12 oz 5.20 in 400 - 960 MHz 2.0:1 Lexan polyurethane enamel N female 55,000 ft 600 knots TAS @ 25,000 ft six-hole external

UHF RADIOPHONE STUB/800-870 MHZ COMANT

2.4 oz 4 in 800 – 870 MHz 1.5:1 nickel plated brass tin-nickel alloy BNC female 25,000 ft 250 knots TAS @ 25,000 ft one-hole internal

The CI-310 series UHF L Band radiophone blade antennas are designed for high-performance aircraft. Features a low-profile, lightweight antenna design and is packaged in a molded body with metal mounting base to ensure stable environmental performance and resistance to vibration, rain erosion and cleaning solvents.

EDMO# CI-285 MFR# CI-285 The CI-285 is a UHF radiophone blade antenna designed for high-performance aircraft over the full frequency range of 400960 MHz. The antenna is encased in a low height, low drag, lightweight molded body and metal mounting base to ensure stable performance in tough environmental conditions.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting: meets RTCA DO-160B requirements

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: mounting:

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting: meets RTCA DO-160C requirements

EDMO# CI-310-20 CI-310-22

MFR# CI 310-20 CI 310-22

5.12 oz 3.25 in 806 - 960 MHz 1030 – 1090 MHz 1.75:1 @ 806 to 960 MHz 1.5:1 @ 1030 to 1090 MHz high density polyurethane polyurethane enamel CI-310-20 BNC female, CI-310-22 TNC female 50,000 ft 600 knots TAS @ 25,000 ft C74c, Class 1A four-hole external

DESCRIPTION BNC female TNC female

Not finding what you need? If you don’t see the antenna you need, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we’ll have it in stock.

1.800.235.3300 | edmo.com

169

Antennas

UHF L Band Radiophone Antennas UHF RADIOPHONE STUB/450-470 MHZ

L BAND BLADE/960 - 1220 MHZ

RAMI

ITT/D&M/EDO

7

EDMO# AV-15 MFR# AV-15 The AV-15 is a UHF radiophone stub antenna used with land mobile radio, and flight phone bands. The durably constructed chrome-plated phosphor bronze whip is set in a Teflon insulator and the chrome-plated ball tip provides low-noise static discharge. The antenna is designed to operate at speeds up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.75 lb @ 250 mph.

weight: height: frequency:

2.5 oz 6.25 in 450 - 470 MHz

VSWR:

1.5:1

material:

chrome-plated phosphor bronze, Teflon insulator chrome-plated BNC female 50,000 ft 350 knots TAS C37d, C38d one-hole internal

finish: connector: altitude: airspeed: FAA TSO mounting:

EDMO# DM1601354 MFR# 1601354-001 The DM 1601354 L band antenna was designed for BCAS characteristics to provide more stringent radiation pattern directivity and to assure reliable system performance. This antenna provides extremely high side load strength that guards against breakage by ground handling gear. Features completely sealed construction preventing failure from moisture incursion, and lightning protection circuits that prevent damage to the antenna while safeguarding electronic equipment.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed: FAA TSO mounting:

5.12 oz -960 - 1220 MHz < 1.8:1 (960 – 1220) < 1.42:1 (1000 – 1100) --C female --C74c, C66b, C112, C119 four-hole external

UHF BLADE/225-400 MHZ RAMI

EDMO# AT-256AARC MFR# AT-256A/ARC The AT-256A/ARC antenna is used for airborne communications on various fixed-wing and rotary-wing aircraft. The antenna is produced to Military Specifications MIL-A-5815 and MIL-A-5815/1. The antenna is designed to operate at the extreme temperature range of -65° F to 257° F with intermittent operation at 302° F and can withstand a static load of 8 psi perpendicular to the blade, with an ultimate of 12 psi. The antenna is protected from corrosion by an anodic coating and the outside surfaces resist particular erosion up to Mach 0.95. The antenna is sealable and tested to an altitude of 70,000 ft.

weight: height: frequency: VSWR: material: finish: connector: altitude: airspeed:

170

2 lb 9 inches 225 – 400 MHz 2.0:1 maximum -anodic coating TNC female 70,000 ft --

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

VHF Base Station & Vehicle Antennas

VHF BASE STATION & VEHICLE ANTENNAS AV-1 BASE STATION/118-137 MHZ RAMI

EDMO# AV-1 MFR# AV-1 The AV-1 is a base station antenna for communications with ground vehicles or aircraft. It’s constructed with 3/8inch diameter aluminum radials, and a 1-inch diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts to a 1-in diameter pipe or a 1-1/4-in OD tube with locking set screws. Equipped with a built-in gap-type lightning arrester.

2.75 lb 37 in 118 - 137 MHz 2.0:1 maximum aluminum iridite SO-239 100 mph

RAMI

EDMO# AV-3 MFR# AV-3 The AV-3 is a low profile snap-in mounting quarterwave antenna for use on surface vehicles. It has a solderless cable connection at the antenna and is supplied with 12 feet of cable and PL-529 connector. The antenna is field tunable by simply cutting the whip to the required length.

weight: height: frequency: VSWR: material: finish: connector:

1 lb 27.5 in 108 - 512 MHz 1.5:1 aluminum -PL-259 male

7

weight: height: frequency: VSWR: material: finish: connector: airspeed:

AV-3 VEHICLE MOUNT/108-512 MHZ

AV-7 VEHICLE MOUNT/118-137 MHZ RAMI

AV-5 BASE STATION/118-137 MHZ RAMI

EDMO# AV-5 MFR# AV-5 The AV-5 is an economical Ground Plane base station antenna. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency. Durably constructed of high quality materials for a long operational life. It mounts to a 1-in diameter pipe or a 1-1/4-in OD tube with provided U-bolt.

weight: height: frequency: VSWR: material: finish: connector: airspeed:

EDMO DISTRIBUTORS

1 lb 34 in 118 - 137 MHz 1.5:1 maximum --SO-239 100 mph

The AV-7 is a high performance vehicular antenna for use on all surface vehicles where communications on the aircraft VHF COM frequency band is required. Heavy duty constructed with a tapered stainless steel whip and spring mount. All exposed fittings are chrome-plated brass or stainless steel. Mounting is easily achieved on rooftop, cowl, fender or other suitable location via a magnetic or fixed “NMO” base. The antenna comes pre-tuned to operate in the aircraft VHF COM frequency band. Includes 17 feet of coax cable with male BNC connector (not attached). AV-7F fixed base mount, AV-7M magnetic base mount.

weight: height: frequency: VSWR: material: finish: connector:

EDMO# AV-7F AV-7M

-45 in 118 - 137 MHz 1.5:1 stainless steel -BNC male

MFR# AV-7F AV-7M

DESCRIPTION BNC, fixed mount, spring-loaded base BNC, whip type with magnetic base

1.800.235.3300 | edmo.com

171

Antennas

Antenna Sealing Supplies VEHICLE ANTENNA/108-512 MHZ

VEHICLE MOUNT ANTENNA/118-940 MHZ

TALLEY COMMUNICATIONS

TALLEY COMMUNICATIONS

7

EDMO# ASPC-201L MFR# MXRASPC201L The ASPC-201L is a field-tunable, broadband vehicle antenna with a snap-in mount for fast, permanent installation in a 3/8-inch hole without the need for soldering. The whip is fastened using a set screw adapter and can be removed easily for fine tuning or replacement. –– Comes with 17-foot RG58U cable and UHF male connector

weight: height: frequency: VSWR: material: base and fittings: mounting method:

-26 in 108 - 512 MHz < 1.5:1 stainless steel aluminum, plated steel and brass 3/8-inch hole snap-in mounts

MAGNET MOUNT WIRE WHIP ANTENNA/ 108-512 MHZ TALLEY COMMUNICATIONS The ASPR-795 is a field-tunable, broadband vehicle antenna with a magnet mount base that simplifies the process of replacing or fine-tuning the whip antenna.

EDMO# BMAXMFTS MFR# MXRBMAX-MFTS The (B)MAXMFT is a field tunable quarter-wave antenna that is durably designed with a rugged, molded-polymer base, plated, spring-loaded contact pin, and 0.1-inch diameter stainless steel whip. –– Molded polymer base –– Provides wideband performance of 2.2 GHz to 2.9 GHz without tuning –– Ready to install; no rod cutting required –– Spring-loaded gold plated contact pin

weight: height: frequency: VSWR: material: finish: mounting method:

EDMO# BMAXMFTS

MFR# MXRBMAX-MFTS

-26 in 118 - 940 MHz 1.5:1 stainless steel with molded polymer base black mates with all 1-1/8-inch 18-thread mounts, including 3/4-inch mounts

DESCRIPTION vehicle mount antenna

ACCESSORIES BMATM

weight: height: frequency: VSWR: material: base and fittings: mounting method:

EDMO# ASPR-795

MFR# MXRASPR795

-26 in 108 - 512 MHz < 1.5:1 stainless steel aluminum, plated steel and brass 1-1/8-inch - 18 thread mobile mounts, including 3/4-inch hole mounts

DESCRIPTION magnet mount wire whip antenna

ACCESSORIES G

MXRG

magnet base cable connector for ASPR-795

MXRBMATM

3/8-inch hole screw-on base

ANTENNA SEALING SUPPLIES ANTENNA SEALING TEMPLATES SEALING GUIDE LLC Keep sealant application simple and tidy with these precise, efficient sealing templates. Each template is customized to fit select antennas. Each two-piece template consists of an inner and outer part; the inner component adheres to the base of the antenna and the outer template is placed on the body of the aircraft surrounding the antenna. Sealant is then applied to the gap between the templates which are later removed after the sealant has cured. See reference table below for template to antenna compatibilities. SG260-430

172

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Antennas

Antenna Sealing Supplies

EDMO#

MFR#

SG260-430

SG260-430

SG175-525

SG175-525

SG260-450

SG260-450

FOR USE WITH: CI-121, CI-122, CI-177, CI-177-1, CI-177-13, CI-177-3, CI-177-20, CI-291, CI-292-1, CI292-2, CI-292-3, CI-292-4, CI-222, CI-222-1, CI-177-4, CI-4510, CI-317, CI-317-1, CI-405 active series, CI-405-26 active series, AV-10, AV-14, AV-17 CI-100 series, CI-105-6, CI-105-7, CI-110-40 series, CI-110-41 series, CI-110-60 series, CI-110-61 series, S65-5366 series, AV-741, DM NI50 series, DM NI70 series CI-2480-100, CI-2480-101, CI-2480-300, CI-2480-301, CI-2480-304, CI-2480-401, CI2480-200, CI-2480-201, CI-2480-204, CI-2480400, CI-420-420, CI-420-421, CI-420-224, CI-420-230, CI-248-5, CI-248-30, CI-248-180, CI-2480-206, CI-420-10, CI-420-16, 110-338

AEROSPACE SEALANT/AMS-S-8802B

RTV ADHESIVE/SEALANT DOW CORNING Dow Corning® 3145 RTV MIL-A-46146 is designed to provide long term bonding and to protect against moisture, environmental factors, mechanical and thermal shock as well as vibration. Typical applications include: bonding of sensitive electronic components and sub-assemblies. –– This is a non-corrosive adhesive/sealant –– Silicone rubber formulation cures at room temperature EDMO# 3145/3OZ/C 3145/3OZ/G

MFR# DC1610431 DC3138313

EDMO DISTRIBUTORS

QTY 3 oz 3 oz

7

EDMO# AC236B1/2 MFR# AC-236 B-1/2 AC-236 Class B is a two-component, manganese dioxide cured, liquid polysulfide polymer aerospace sealant that provides excellent fuselage seals. AC236 Class B maintains its flexibility and bond strength on most metal substrates like aluminum, stainless steel, steel, and many coatings under extremes of temperature, weathering and stress. The mixed compound is a thixotropic paste easily applied by extrusion, injection gun, or spatula. It has excellent tooling properties. Perfect sealant for antenna installations. Application Life & Cure Time (@ 75ºF, 50% relative humidity). –– Minimum application life: 1/2 hour –– Typical tack-free time: 8 hours –– Typical cure time to 35A4: 24 hours –– Shelf life: 9 months from package/mixed may be stored under refrigeration as follows: 15 days at -20°F, 30 days at -40°F –– Weight: 25 grams

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY. EDMO carries a wide range of products, including custom options, so if you’re not finding what you need, give us a call at 1.800.235.3300 or visit edmo.com. We’re constantly updating our inventory so there’s a good chance we will have what you’re looking for.

COLOR clear gray

1.800.235.3300 | edmo.com

173

Trusted in Aviation

Kannad Integra Emergency Locator Transmitter

The world’s most innovative, resilient and reliable ELT Internal GPS Antenna GPS Module

The only ELT with back-up antenna that optimizes signal transmission Embedded GPS receiver ensures location accuracy Industry’s longest warranty – 10 years

McMurdo Aviation Solutions

www.mcmurdogroup.com

ELTs & Accessories

ELTs 406 MHz.................................................................................................... 176 ELT Antennas.................................................................................................... 188 ELT Test Sets..................................................................................................... 191 ELT Batteries..................................................................................................... 193

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

175

ELTs & Accessories ELTs 406 MHz

ELTS 406 MHZ

8

MFR#

8221

8221

ACR ELECTRONICS INC. / ARTEX

8222

8222

The ELT 3000 is a compact and lightweight, transport-grade emergency locator transmitter (ELT) that can integrate with the NAV interface via ARINC42 or RS232 – eliminating the need to install a separate NAV interface unit. With seamless NAV-data integration, latitude/longitude is transmitted automatically every 50 seconds for 24 hours on the distress frequency. This allows emergency responders to pinpoint the exact location within minutes from activation. –– Lightweight and compact 406 MHz transport-grade ELT with builtin ARINC/GPS RS232 interface –– Automatic Fixed Emergency Locator Transmitter –– Tri-frequency distress beacon: digital 406 MHz and analog 121.5/243 MHz homing signals –– Simple to install and maintain –– Several remote switch options available –– Connects to onboard GPS via the integrated ARINC429 or RS232 interface –– Embeds GPS data into the digital transmission to reduce the search radius to 100 meters –– Worldwide Cospas-Sarsat coverage –– Helicopter version (3000 HM) contains 5-axis G-switch –– Compatible with 406Test.com satellite confirmation testing system for real-time beacon testing –– 6-year, lithium (LiMnO2) battery –– Approvals: FAA TSO, Cospas-Sarsat, EASA

8223

8223

8224

8224

ELT 3000

weight: dimensions: operating frequencies: output power:

input power: output connector: activation: battery: operating temperature: storage temperature: self test checks:

GPS Navigational Interface: Remote Control Functions:

176

EDMO#

2.0 lb 5.5 x 3.8 x 3.4 in 406.040 MHz ±1 kHz(16K0G1D) Depending on Cospas-Sarsat TAC 121.5 and 243 MHz ±5 kHz (3K20A3X) 406 MHz: 5 W ±2 dB (520 ms/50 sec) for 24 hr @ -20°C (-4°F) 121.5/243.0 MHz: 100 mW min (20 dBm) for 50 hr @-20°C (-4°F) 9V to 32V @ 25 mA max. 406/243/121.5 MHz: BNC female automatic by 4.5 ft/s (2.3 G) primary G-switch manual activation 6-year lithium (LiMnO2) -20°C to 55°C (-4°F to 131°F) -55°C to 85°C (-67°F to 185°F) G-switch enabled 406 MHz power antenna/coax connection low battery GNSS NAV system ARINC 429 (high speed/low speed) RS232 On/Arm/Test (2-wire and 5-wire connectivity)

1.800.235.3300 | edmo.com

DESCRIPTION

FIXED WING ELT 3000 beacon and 6-year battery with built in GPS NAV interface ELT 3000 base pack includes 406 MHz ELT, installation hardware, buzzer and mounting tray ELT 3000 base pack includes 406 MHz ELT with rod antenna (110-338) and remote switch (8304), installation hardware, buzzer, and connectors ELT 3000 base pack includes 406 MHz with blade antenna (110-340) and remote switch (8304), installation hardware, buzzer, and connectors

HELICOPTER 8231

8231

8232

8232

8233

8233

ELT 3000HM beacon and 6-year battery with built in GPS NAV interface ELT 3000HM base pack includes: 406 MHz ELT, installation hardware, buzzer and mounting tray ELT 3000HM base pack includes: 406 MHz ELT with rod antenna (110-338) and remote switch (8304), installation hardware, buzzer, and connectors

ACCESSORIES 8315

8315

8316

8316

8318

8318

A2-07-0270

ELT battery/Lithium, 6 year. For use with Artex ELT 3000 and 3000HM ELT mounting tray/For use with Artex ELT 3000 and 3000HM ELT retrofit mounting tray/For use with Artex ELT 3000 and 3000HM programming cable for ELT 3000

ELT 345 BASE PACK ACR ELECTRONICS INC. / ARTEX

The ELT 345 is a 406 MHz ELT that provides exceptional value at an extremely competitive price. This unit can be activated manually (via the cockpit remote switch or ELT switch) or automatically (the G-switch senses a 2.3 G or greater impact). Once activated, the ELT 345 transmits a 406 MHz signal with the beacon’s registration information and embedded GPS coordinates to the closest search and rescue agency via the Cospas-Sarsat satellite system. The beacon also transmits a 121.5 MHz homing signal to help search and rescue pinpoint the aircraft/ELT location. This unit is designed for fast, flexible installation as either a new install or as a retrofit with options like a two-wire remote switch that does not draw aircraft power. The ELT 345 is a single-output ELT, using the same RF output and only one coax cable to transmit both 406 MHz and 121.5 MHz signals. The unit’s built-in navigational interface does not require aircraft power to operate—which results in lower install costs—and the stainless steel mounting bracket supplied with the unit has a multiple hole mounting pattern to accommodate legacy footprints.

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

–– Automatic fixed (AF) emergency locator transmitter with manual or automatic activation using a hermetically sealed G-switch –– Single antenna output for 406 MHz and 121.5 MHz –– Provides position accuracy to within 100 meters through a built-in GPS interface (NMEA 0183 or RS 232) –– ELT and installation can be tested using a satellite-based online confirmation test via ARTEX’s proprietary satellite testing service at 406Test.com –– Includes a stainless steel mounting bracket with a multiple hole pattern configuration for retrofitting legacy ARTEX ELTs as well as ACK, or Kannad ELTs –– 2-wire interface does not require aircraft power –– Worldwide coverage –– The ELT 345 Base Pack includes whip antenna, remote switch, install hardware, buzzer and connector.

weight: dimensions: operating frequencies:

output connector: activation: battery: storage temperature: self test: remote control: antenna: mounting tray & strap: approvals:

EDMO# 8102

MFR# 8102

406 MHz: 5W for 24 hours @ -20°C to +55°C (-4°F - 121°F) 121.5 MHz: 50 mW for 50 hours @ -20°C to +55°C (-4°F - 131°F) BNC female automatic by 4.5 ft/sec (2.3 G) primary G-switch or manual activation 6-year Lithium (Limnos) -55°C to +85°C (-67°F - 85°F) G-switch enabled; 406 MHz and 121.5 MHz power; NAV system; Low battery on/arm/test black whip antenna (8324) EDMO# 8323 (Universal mounting hole pattern fits 90% of existing ELT hole configurations) Cospas-Sarsat, FAA TSO

DESCRIPTION ELT 345 Base Pack

ACCESSORIES 8322

8322

replacement ELT battery

8

GPS:

2 lb (with tray) 6.4 × 2.96 × 3.78 in (transmitter with mounting hardware installed) 121.5 MHz +/-6.075 kHz (Emission Designator 3K20A3X) 406.040 MHz +/- 1 kHz (Emission Designator 16K0G1D) Depending on Cospas-Sarsat TAC built-in GPS navigation interface

output power:

ELTs & Accessories

8

ELTs 406 MHz

ELT 1000 SYSTEM

ME406 SERIES ELTS

ACR ELECTRONICS INC. / ARTEX

ACR ELECTRONICS INC. / ARTEX

The ELT 1000 is an excellent, cost-efficient option for upgrading standard 121.5 MHz transmitters, which are no longer monitored by the Cospas-Sarsat System. The ELT 1000 is a single-output ELT that transmits on both 406 MHz and 121.5 MHz using the same RF output and one coax cable. The 406 signal alone produces an accurate position within 1.86 miles and when paired with the aircraft’s navigation system via the built-in GPS interface, the ELT’s accuracy is further improved to about 110 yards. The GPS interface does not require aircraft power to operate and the remote switch only requires two wires, which reduces installation costs and labor. –– Automatic fixed emergency locator transmitter –– Equipped with a single antenna output for emergency transmission on both 406 MHz (Cospas-Sarsat) and 121.5 MHz frequencies –– Provides enhanced positional accuracy using a built-in GPS interface that does not require aircraft power –– Encoded digital message broadcasts aircraft identification/registration and owner/emergency contact details –– This ELT 1000 kit includes ELT base pack, 406 MHz ELT, installation hardware, audio buzzer and mount tray

The ME406 is a single output ELT that uses the same RF output and only one coax cable to transmit a 406 MHz emergency signal to the Cospas-Sarsat satellites and a local 121.5 homing signal. In the event of a crash, the ELT automatically activates and transmits a continuous swept tone of 121.5 MHz while the 406 MHz transmitter sends an encoded 5-watt signal to the Cospas-Sarsat Satellites every ME406 50 seconds for 440 milliseconds. The ME406 can be mounted using the same footprint as many other ELTs—its mounting hardware is compatible with all previous models of Artex 406 MHz ELT products, as well as the ELT-300 series, ACK, Pointer Model 3000, and Narco ELTs. Additionally, current owners of the Artex 2-frequency TSO C91a ELTs can reuse the remote switch in the cockpit as well as the wiring harness ME406HM from the cockpit to the ELT, which reduces installation costs. –– Mounting hardware for the ME406 is compatible with all previous models of the Artex 406 MHz ELT products, as well as the ELT 200 series, Ameri-King, ACK, pointer model 3000 ELT, and Narco ELTs –– The portable versions of the ME406 can be removed from the aircraft and are equipped with an auxiliary wrap-around antenna that can provide continued distress signal transmissions –– Single-directional and multi-directional G-switch versions are available for fixed wing and heli aircraft, respectively –– System versions listed below include install kits

weight: dimensions: operating frequencies: GPS: output power:

output connector: activation: battery: storage temperature: self test: remote control: antenna options: approvals:

2.2 lb (tray included) 6.6 × 2.9 × 3.7 in 406 MHz, 121 Mhz +/-5 KHz, GPS interface built-in GPS navigation interface 406 MHz; 5 W for 24 hours @ -20°C to 55°C (-4°F to 131°F) 121.5 MHz; 100 mW min > 50 hours @ -20°C to 44°C (-4°F to 131°F) BNC female (406; 121.5 MHz) automatic by 4.5 ft/sec (2.3 G) primary G-switch or manual activation 6-year Lithium (LISO2) -20°C to 55°C G-enabled, 406 MHz power, antenna/coax connection, low battery on/arm/test rod (110-338 sold separately) whip (110-773 sold separately) Cospas-Sarsat, FAA TSO

weight: dimensions: antenna options: operating frequencies: output power: output connector: activation: battery: temperature certified to:

EDMO#

MFR#

8202

8202

8203

8203

8204

8204

DESCRIPTION 406MHz ELT, includes installation hardware, audio buzzer and mounting tray 406MHz ELT with whip antenna (110-773), remote switch (8304), and install kit with buzzer and connectors 406MHz ELT with rod antenna (110-338) remote switch (8304), and install kit with buzzer and connectors

self test: remote control: certifications:

2.05 lb 6.59 × 2.86 × 3.69 in (transmitter with mounting hardware installed) 110-338 rod antenna, 110-773 whip antenna 406 MHz, 121.5 MHz +/- 5 KHz 406 MHz: 5 W (440 ms/ 50 sec) for 24 hours @ -20°C to +55°C, 121.5 MHz: 100 mW minimum for 50 hours @ -20°C to +55°C BNC female (121.5 and 406 MHz) automatic by 4.5 feet per second (2.3 G) primary G-switch or manual activation 6-year lithium (LiMnO2, solid cathode) operating: -20°C to +55°C, storage: -55°C to +85°C G-switch enabled 406 MHz power, antenna/coax connection, low battery ON/ARM TSO C126, ETSO 2C126, Cospas/Sarsat approved, Transport & Industry Canada approved

ACCESSORIES 8302 8303 8304 8603

8302 8303 8304 8603

ELT 1000 replacement battery / 5 year ELT 1000 mounting strap and tray ELT 1000 remote switch ELT 1000 antenna / rod / 121.5MHz, 243MHz, 406MHz

EDMO# 455-6603 455-6605

MFR# 455-6603 455-6605

DESCRIPTION ME406 transmitter and mounting hardware ME-406 ELT System includes: whip antenna, install kit, remote switch, mounting tray, buzzer, battery, coax cable, install/ ops manual

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

178

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

EDMO# 455-6607

455-6614

MFR# 455-6607

455-6614

DESCRIPTION ME406 ELT System includes: rod antenna, install kit, remote switch, mounting tray, buzzer, coax cable, install/ops manual ME406 ACE (absolute cost efficiency) System includes: install kit, remote switch, mounting tray, whip antenna, buzzer, module interface, ops/install manual, 6 ft. coax cable, flat cable and extender

weight: dimensions: antenna options: operating frequencies: output power:

ME406P PORTABLE ELTS (EDMO# 453-6611) 453-6611 455-6613

455-6615

453-6611 455-6613

455-6615

ME406P transmitter and battery only ME406P Portable ELT System includes: 3 frequency rod antenna, 2 frequency portable antenna, install kit, remote switch kit, mounting tray, buzzer, 6 ft. coax cable/BNC connector, operation/install/maintenance manuals ME406P Portable ELT System includes: tether, battery, 2 freq portable antenna, install kit, mounting tray, buzzer operation, install/ maintenance manuals

output connector: activation: battery: temperature certified to: self test: remote switch: certifications:

ME406 HM (FOR HELICOPTER WITH MULTI-AXIS G-SWITCH) 455-6604 455-6606

455-6604 455-6606

ME406HM transmitter and mounting hardware ME406HM ELT System includes: rod antenna, install kit, remote switch, mounting tray, buzzer, coax cable, install/ops manual

ACCESSORIES 452-3034-1 150-1127 452-6505 455-0023 455-7423 500-0057 990-0400

ME406 ELT mounting tray ME406 ELT connector pin ME406 ELT buzzer ME406 ELT remote switch ME406 ELT install kit ME406 ELT test adapter ME406 ELT protective plastic cap

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

MFR# 453-5060 455-5060

455-5061

455-5061

455-5062

455-5062

455-5063

455-5063

INCLUDES C406-N transmitter and battery only C406-N transmitter Base Pac includes: battery and accessories C406-N transmitter includes: battery and accessories transmitter, battery and install kit, and 110-340 high speed blade antenna C406-N transmitter includes: rod antenna

8

452-3034-1 150-1127 452-6505 455-0023 455-7423 500-0057 990-0400

EDMO# 453-5060 455-5060

3 lb 5.8 oz (transmitter max) 7 oz (mounting tray) 11.7 × 3.9 × 3.82 in (transmitter with mounting hardware installed) 110-338 rod antenna 406 MHz, 121.5, 243 MHz +/- 0.005% (A3X) 406 MHz: 5 W (520 ms / 50 sec) for 24 hours @ -20°C to +55°C, 121.5/243.0 MHz: 100 mW min (+20 dBm) for 50 hours @ -20°C to +55°C BNC female (121.5/243/406 MHz) automatic by 4.5 feet per second (2.3 G) primary G-switch or manual activation 5-year lithium (LiMnO2, solid cathode) operating: -20°C to +55°C, storage: -55°C to +85°C G-switch enabled 406 MHz power, antenna/coax connection, position data present, low battery ON/ARM TSO C126, ETSO 2C126, Cospas/Sarsat approved, Transport & Industry Canada approved

C406-N HM (FOR HELICOPTER WITH MULTI-AXIS G-SWITCH) 453-5061 455-5064

453-5061 455-5064

C406-N HM transmitter and battery only C406-N HM includes: rod antenna and remote switch

ACCESSORIES

C406-N SERIES ELTS

453-5068 452-3052 452-5050 452-5052 455-7422

ACR ELECTRONICS INC. / ARTEX Similar to the C406-1 series of Artex ELTs, the C406-N is also a single output ELT with the distinction that it incorporates latitude and longitude information directly from the aircraft navigation system. In the event of a crash, the Artex C406-N ELT automatically activates and transmits an emergency message on the standard swept tone on 121.5 and 243.0 MHz and also transmits an encoded digital message to the Cospas-Sarsat satellite system at 406 MHz, which makes it easier for rescuers to quickly identify victims while reducing search times. Using an optional programming adapter, the ELT can also be programmed with the aircraft’s 24-bit address and other custom programming for fleet operators. –– Operates on 121.5, 243, and 406 MHz frequencies with worldwide coverage –– An optional programming adapter makes it possible to program the ELT with the aircraft’s 24-bit address for fleet operators –– Single-directional and multi-directional G-switch versions are available for fixed wing and heli aircraft, respectively –– Equipped with a Lithium-ion battery with a five-year life

EDMO DISTRIBUTORS

453-5068 452-3052 452-5050 452-5052 455-7422

C406-N ELT programming adapter 406-Series ELT top mount cover 406-Series ELT mounting tray 406-Series ELT mounting frame cap C406N install kit includes: (1 ea.) 22 pos. plug size 12, (1 ea.) strain relief size 12, (13 ea.) plug sealing grommet, (4 ea.) screw, (4 ea.) nut, (4 ea.) washer, (4 ea.) washer, (1 ea.) hex code label, (1 ea.) country code label

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

453-5060

455-5062

455-5064

1.800.235.3300 | edmo.com

179

ELTs & Accessories ELTs 406 MHz

C406-1 SERIES ELTS

8

ACR ELECTRONICS INC. / ARTEX The Artex C406-1 ELT automatically activates in the event of a crash and transmits on all three emergency frequencies (121.5, 243.0, and 406 MHz). The C406-1 transmits the standard swept tone on 121.5 and 243.0 MHz and also transmits an encoded digital message to the Cospas-Sarsat satellite system at 406 MHz, which makes it easier for rescuers to quickly identify victims while 453-5002 speeding up search times. The C406-1 is a single output ELT and uses the same RF output NC (f) connector for all three transmitted frequencies. As such, it requires only one coax cable to connect to the Artex single input antennas. Latitude and longitude data can also be transmitted as part of the 406 MHz message when the C406-1 is interfaced with the optional Artex ELT/NAV interface. –– Operates on 121.5, 243, and 406 MHz 455-5015 frequencies with worldwide coverage –– Compatible with the ELT to navigation interface –– Single-directional and multi-directional G-switch versions are available for fixed wing and heli aircraft, respectively –– Equipped with a Lithium-ion battery with a five-year life –– System versions listed below include install kits

weight:

3 lb 5.8 oz (transmitter max) 7 oz (mounting tray) dimensions: 11.7 × 3.9 × 3.82 in (transmitter with mounting hardware installed) antenna options: 110-338 rod antenna, 110-340 blade antenna operating frequencies: 406 MHz, 121.5, 243 MHz +/- 0.005% (A3X) output power: 406 MHz: 5 W +/- 2 dB (520 ms/50 sec) for 24 hours @ -20°C, 121.5/243 MHz: 100 mW minimum (+20 dBm) for 50 hours @ -20°C output connector: BNC female (121.5/243/406 MHz) activation: automatic by 4.5 feet per second (2.3 G) primary G-switch or manual activation battery: 5-year lithium (LiMnO2, solid cathode) temperature certified operating: -20°C to +55°C, storage: -55°C to +85°C to: self test: G-switch enabled 406 MHz power, antenna/coax connection, position data present, low battery remote switch: ON/ARM certifications: TSO C126, ETSO 2C126, Cospas/Sarsat approved, Transport & Industry Canada approved

EDMO# 453-5002 455-5014 455-5015

MFR#

INCLUDES

453-5002-[366] transmitter and battery 455-5014 transmitter and 110-338 rod antenna 455-5015 transmitter and 110-340 tri-band blade antenna with single connector

C406-1HM (FOR HELICOPTER WITH MULTI-AXIS G-SWITCH) 455-5016

455-5016

transmitter and 110-338 rod antenna

ACCESSORIES 455-9703 452-0133 452-3052 452-5050 452-5052

455-9703 452-0133 452-3052 452-5050 452-5052

NVG remote switch 406-Series Lithium ELT battery / 5 year 406-Series ELT top mount cover 406-Series ELT mounting tray 406-Series ELT mounting frame cap

EDMO#

MFR#

455-7421

455-7421

990-0402 151-5012

990-0402 151-5012

INCLUDES C406 ELT install kit includes: (1 ea.) 12 pin connector, (12 ea.) crimp male pins, (4 ea.) screw, (4 ea.) nut, (4 ea.) washer, (4 ea.) washer, (1 ea.) hex code label, (1 ea.) country code label C406 ELT protective cap cover 12 pin connector for Artex B-406, C-406, G-406

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

C406-2 SERIES ELTS ACR ELECTRONICS INC. / ARTEX Like the C406-1, the Artex C406-2 ELT transmits location information on all three emergency frequencies (121.5, 243.0, and 406 MHz) after a crash has occurred. The C406-2 transmits the standard swept tone on 121.5 and 243.0 MHz and also transmits an encoded digital message to the Cospas-Sarsat satellite system at 406 MHz, which makes it easier for rescuers to 453-5000 quickly identify victims while reducing search times. The C406-2 differs from the C406-1 in that it is a dual output device and uses NC (f) connector output for 121.5 and 243 MHz while the 406 MHz signal is transmitted through a TPS (f) connector. Latitude and longitude data can also be transmitted as part of the 406 MHz message when the C406-2 is interfaced with the optional Artex ELT/NAV interface. 455-5011 –– Operates on 121.5, 243, and 406 MHz frequencies with worldwide coverage –– Compatible with the ELT to navigation interface –– Single-directional and multi-directional G-switch versions are available for fixed wing and heli aircraft, respectively –– Equipped with a Lithium-ion battery with a five-year life –– System versions listed below include install kits

weight: dimensions: antenna options: operating frequencies: output power: output connector: activation: battery: temperature certified to: self test: remote switch: certifications:

3 lb 5.8 oz (transmitter max) 7 oz (mounting tray) 11.7 × 3.9 × 3.82 in (transmitter with mounting hardware installed) 110-320 rod antenna, 110-337 blade antenna 406 MHz, 121.5, 243 MHz +/- 0.005% (A3X) 406 MHz: 5 W +/- 2 dB (520 ms/50 sec) for 24 hours @ -20°C, 121.5/243 MHz: 100 mW minimum (+20 dBm) for 50 hours @ -20°C BNC female (121.5/243/406 MHz) automatic by 4.5 feet per second (2.3 G) primary G-switch or manual activation 5-year lithium (LiMnO2, solid cathode) operating: -20°C to +55°C, storage: -55°C to +85°C G-switch enabled 406 MHz power, antenna/coax connection, position data present, low battery ON/ARM TSO C126, ETSO 2C126, Cospas/Sarsat approved, Transport & Industry Canada approved

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

180

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

EDMO#

MFR#

453-5000 455-5010

453-5000 455-5010

455-5011

455-5011

INCLUDES transmitter and battery 110-320 rod antenna, 455-6196 remote switch, cable assembly 110-337 blade antenna, 455-6196 remote switch, cable assembly, LiMnO2

C406-2HM (FOR HELICOPTER WITH MULTI-AXIS G-SWITCH) 453-5001 455-5012

453-5001 455-5012

EDMO#

MFR#

453-5012 455-5019

453-5012 455-5019

455-5044

455-5044

transmitter and battery 110-320 rod antenna, 455-6196 remote switch

ACCESSORIES 452-3052 452-5050 452-5052 455-7421

452-3052 452-5050 452-5052 455-7421

990-0402

990-0402

ELT top mount cover ELT mounting tray ELT mounting frame cap ELT install kit includes: (1 ea.) 12 pin connector, (12 ea.) crimp male pins, (4 ea.) screw, (4 ea.) nut, (4 ea.) washer, (4 ea.) washer, (1 ea.) hex code label, (1 ea.) country code label ELT protective cap cover

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

G406-4 SERIES ELTS ACR ELECTRONICS INC. / ARTEX

ACCESSORIES 452-0227 452-0222 455-7421

452-0227 452-0222 455-7421

More options available. Please visit edmo.com or call 1.800.235.3300 for more details.

ARTEX PROGRAMMING DONGLE ACR ELECTRONICS INC. / ARTEX

EDMO# 455-4010 MFR# 455-4010 The DGL-1 programming dongle allows the operator to program an aircraft’s 24-bit address into a compatible Artex ELT. This makes it very easy for ELTs to be switched between aircraft conveniently and efficiently with reduced maintenance and downtime. The DGL-1 is designed with an attached top cover—both the cover and dongle remain in the aircraft, all that is needed is to swap out ELTs. Once an ELT is installed, the DGL-1 automatically reprograms the ELT. –– Compatible with existing C406-1/2, G406-4, and B406-4 installations –– Ideal hardware option for fleet aircraft identification

weight: weight: dimensions: antenna options: operating frequencies: output power:

3 lb 5.8 oz (transmitter max) 7 oz (mounting tray) 11.7 × 3.9 × 3.82 in (transmitter with mounting hardware installed) 110-338 rod antenna 406 MHz, 121.5, 243 MHz +/- 0.005% (A3X)

406 MHz: 5 W +/- 2 dB (520 ms/50 sec) for 24 hours @ -20°C, 121.5/243 MHz: 100 mW minimum (+20 dBm) for 50 hours @ -20°C output connector: BNC female (121.5/243/406 MHz) activation: automatic by 4.5 feet per second (2.3 G) primary G-switch or manual activation battery: 5-year lithium (LiMnO2, solid cathode) temperature operating: -20°C to +55°C, storage: -55°C to +85°C certified to: self test: G-switch enabled 406 MHz power, antenna/coax connection, position data present, low battery remote switch: ON/ARM certifications: TSO C126, ETSO 2C126, Cospas/Sarsat approved, Transport & Industry Canada approved

EDMO DISTRIBUTORS

ELT mounting tray ELT Lithium battery ELT install kit includes: (1 ea.) 12 pin connector, (12 ea.) crimp male pins, (4 ea.) screw, (4 ea.) nut, (4 ea.) washer, (4 ea.) washer, (1 ea.) hex code label, (1 ea.) country code label

dimensions: power: temperature: compatible with:

8

Designed for the general aviation market, the G506-4 series ELTs automatically activate during a crash and transmit the standard swept tone on 121.5 and 243.0 MHz frequencies while simultaneously transmitting a 406 MHz encoded digital message to the Cospas-Sarsat satellite system for reduced identification and search and rescue times. –– Operates on 121.5, 243, and 406 MHz frequencies with worldwide coverage –– Compatible with the ELT to navigation interface, which enables latitude and longitude data to be transmitted as part of the 406 MHz message –– Equipped with a Lithium-ion battery with a five-year life –– System versions listed below include install kits

INCLUDES ELT transmitter and battery only ELT system includes: transmitter, LiMnO2 5 year battery, mounting bracket, remote switch, coax cables, rod antenna, install kit, operation/install manual ELT system includes: transmitter, LiMnO2 5 year battery, mounting bracket, remote switch, coax cable, whip antenna, install kit, operation/install manual

6 oz (DGL-1 max) 6.7 oz (protective top cover) 11.5 oz (total weight) 2.5 × 6.1 in input: +28 VDC +/- 10 Vdc output: 5.6 VDC +/- 0.3 Vdc (powers ELT for reprogramming only) operating: -20°C to +55°C storage: -55°C to +85°C 110-406 NAV, 110-406HM NAV, 110-406ED NAV, B406-2, B406-4, C406-1, C406-1HM, C406-2, C406-2HM, G406-1, G406-2, G406-4

ARTEX ELT INSTALLATION & MOUNTING COMPONENTS ELT TO NAV INTERFACE

EDMO# 455-6500 MFR# 455-6500 The Artex “ELT to NAV Interface” connects the aircraft’s Flight Management Computer (FMC) or GPS receiver with an Artex 406 MHz ELT (G406-4, C406-1, C406-2, C406-1 HM, C406-2 HM). Its

1.800.235.3300 | edmo.com

181

ELTs & Accessories ELTs 406 MHz

function is to receive continuous position updates from the aircraft’s navigation system and translate it to the proper format for use by the ELT. Once activated, the ELT transmits the latitude and longitude information from the GPS along with the 406 distress signal. –– Allows the ELT to transmit latitude and longitude of the aircraft –– Connects C406 and G406 series ELTs to the aircraft Flight Management Computer or GPS receiver –– Programs ELT with the 24-bit aircraft address –– Compatible with Garmin, UNSD, ARNAV, II Morrow, and Bendix King systems –– Includes 455-6500 Install Kit, EDMO# 455-0650 EDMO# 455-6500

MFR#

DESCRIPTION

455-6500

EDMO#

MFR#

DESCRIPTION

8315

8315

452-0129 452-0130 452-013002 452-0131 452-3063 452-3065

452-0129 452-0130 452-0130-02 452-0131 452-3063 452-3065

455-0012

455-0012

452-0129

452-0129

ELT battery 6-year lithium for use with ELT 3000 and 3000HM ELT SLB 406 battery pack ELT battery 2-year alkaline ELT battery 2-year alkaline ELT battery 5-year lithium/G406-1 & G406-2 ELT battery 2-year alkaline for use with ELT 200 ELT battery 6-year lithium for use with ELT 200HM and 203SL ELT battery 6 year lithium includes:452-6499 battery pack, 183-0050 replacement gasket, 200-01-0006 label ELT battery pack 5-year for ELT SLB406

ELT to NAV interface

ACCESSORIES 455-0650

455-0650

Install kit for ELT to NAV interface

CABLE & CONNECTORS ELT BUZZER

EDMO# 130-4004 MFR# 130-4004 ELT buzzer for use with the Artex 110406 MHz ELTs.

ELT INLINE TEST HARNESS

ELT TEST PLUG

EDMO# 151-2012 MFR# 151-2012 ELT test plug for use with Artex ELTs.

EDMO# 611-0024 MFR# 611-0024 Inline test harness for Artex 406 ELTs.

EDMO#

8

EDMO#

MFR#

DESCRIPTION

ELT remote switch kit for ELT110-406 345-619604 345-6196-04 ELT remote switch only / ELT110-406 345-6196 345-6196 ELT remote switch ELT200 / ELT 110-406 Includes the switch and mounting screws, nuts, and washers.

455-6196

455-6196

ELT BATTERIES Replacement batteries for Artex ELTs.

455-0012

DESCRIPTION

611-6052

611-6052

6 ft Teflon coaxial cable, thermoplastic sheathed with TNC connector

CONNECTORS 150-1120 151-2100 151-2101 151-5009 151-6657

Artex TPS connector contact socket #20 contact pin #20 receptacle housing crimp socket

KANNAD INTEGRA 406 GPS ELT SERIES

ELT remote switches for Artex ELTs. 455-6196 comes standard for all TSO C91a and TSO C126 ELTs except for the ME406 ACE, B406 series ELTs.

455-6196

MFR#

CABLE

150-1120 151-2100 151-2101 151-5009 151-6657

ELT REMOTE SWITCHES

182

Artex connectors and electrical components.

452-3063

452-0129

1.800.235.3300 | edmo.com

MCMURDO The Integra 406 ELT series offers an efficient option for installing or retrofitting a 406 MHz ELT with GPS capabilities in individual or fleet aircraft. The Integra ELT transmits distress signals and location data via a 406 MHz signal to the COSPAS-SARSAT network of satellites in conjunction 50501-01 with a homing signal on 121.5 MHz which allows rescuers to narrow down the search area to 490 square miles. Variants of the Integra family are available with either an internal GPS or a GPS nav interface (see table below). The Integra’s GPS capabilities make it possible for the ELT to send exact GPS 1202502 coordinates for a crash site location, further narrowing the search area to 0.03 square miles while lowering response times to as little as 30 minutes. The Integra ELTs are an excellent choice for pilots and technicians seeking to add a GPS-capable ELT to their aircraft. The Integra is a compact unit that uses a universal mounting plate for quick retrofits, does not rely on aircraft power, and can be used with a remote switch option for installations where space is limited. An optional programming dongle also makes the Integra ideal for fleet installs. –– The Integra is available in Automatic Fixed and Automatic Portable

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

versions for both fixed-wing and helicopter applications –– The Automatic Fixed version is permanently attached to the aircraft and is connected to an external antenna –– The Automatic Portable version is rigidly attached to the aircraft and connected to an external antenna but can be easily removed from the aircraft after a crash at which point the signal is transmitted using the integral and auxiliary antennas –– Two-frequency transmitter; when activated, provides 24-hour certified transmission on 406 MHz (distress signal) and over 48 hours on 121.5 MHz –– Available with two different GPS options; can be equipped with either an integrated internal GPS or an NMEA Integra E-Nav GPS interface (see product table for options) –– Portable version can be removed from the aircraft after a crash with no external power supply required –– Choice of remote control panels with three-wire and two-wire installation options –– Minor change approval available for most common aircraft –– Operates at temperatures as low as -20°C (-40°C version available for mounting outside pressurized fuselage) –– Optional programming dongle, perfect for fleet operators –– Universal mounting bracket makes for simple retrofits using existing footprints –– Powered solely by the ELT battery (6-year battery life)

dimensions: housing: autonomy: controls and indicators: interfaces: battery: unique functions: certifications:

EDMO# 50501-01 51501-01 52501-01 1202503 1000337

typical: 1.873 lb (850 g) / max: 1.929 lb (875 g) (including batteries) transmitter only: 5.15 × 3.39 × 2.97 in (131 × 86 × 75.4 mm) material: molded plastic color: yellow (color compounded) minimum operational duration at -20°C: 24 hours on 406MHz and over 48 hours on 121.5MHz ARM/OFF/ON switch bright red LED internal buzzer outside buzzer option DIN12 socket for remote control panel (RCP) pin programming option BNC antenna connector replacement interval every 6 years accessories directly powered by ELT battery integrated 406 antenna built-in GPS (antenna & receiver) COSPAS –SARSAT Class 2 (-20°c to +55°c) RTCA DO-160/EUROCAE ED14 Environmental conditions

MFR#

DESCRIPTION

S1850501-01 automatic portable/ER transmitter, battery and auxiliary antenna S1851501-01 automatic fixed/ER transmitter and battery only automatic fixed/ER transmitter and battery only (for helicopter use) 1202503B automatic fixed transmitter with RC200 kit and plugs (for helicopter use) 1000337 Integra ELT Smart Pack includes: automatic fixed transmitter and NMEA Integra e-Nav interface (20514-08), universal mounting bracket, RC200 Kit, and DIN12 connector

WITH INTERNAL GPS 1202502

1202502B

transmitter, universal mounting bracket, RC200 Kit, and DIN12 connector

ACCESSORIES

EDMO DISTRIBUTORS

50581-01 AV-200 AV-300

MFR#

DESCRIPTION

Integra 406 NMEA navigation interface/GPSRS232; provides backup GPS information for the ELT during emergency situations in which the ELT cannot receive signals with its built-in GPS receiver S1850581-01 Integra ARINC ELT NAV interface AV-200 ELT whip antenna / 121.5 MHz and 406 MHz / BNC female AV-300 ELT rod antenna / 121.5, 243 and 406 MHz / BNC female

KANNAD 406 AF COMPACT ELT KIT MCMURDO Small and light, the McMurdo Kannad 406 AF Compact ELT is ideal for light aircraft—it provides all of the benefits of a full-fledged, fixed 406 ELT while saving on space. The reliable G-switch shock sensor activates the ELT in the event of impact and when needed, the user may also manually activate it. Once activated, the AF then transmits a homing signal on 121.5 MHz and a distress signal on 406 MHz to the Cospas-Sarsat system. This ELT does not require the aircraft’s power in order to work; it is equipped with its own lithium ion, two-element battery. Like McMurdo’s other ELTs, the Compact ELTs are compatible with McMurdo’s programming dongles. The dongle is installed permanently on the aircraft and when a product is removed for service it can be replaced with any other McMurdo Kannad ELT. Once connected to the dongle, all necessary aircraft programming information is then uploaded to the newly installed ELT. These devices are also compatible with McMurdo’s remote control panels that provide control of the ELT from the cockpit when the ELT is installed in a different section of the plane. –– Two-frequency transmitter; when activated, provides 24-hour certified transmission on 406 MHz (distress signal) and over 48 hours on 121.5 MHz –– Two-wire capability to control panel with optional control panel RC102 –– Compatible with Kannad remote control panels –– Kit includes: 40502-02 mounting bracket, 40510-01 ELT battery kit, 20513-11 RC200 remote control switch, 20514-03 DIN-12 connector, 0126631 SUB D 9 pin connector

weight: dimensions: transmission:

8

weight:

EDMO# 20514-08

typical: 1.873 lb (850 g) max: 1.929 lb (875 g) installed with mounting bracket: 6.89 in × 3.9 × 3.4 in (175 × 9 × 86.4 mm) 406 MHz: frequency: 406.028 MHz ± 1 kHz output power: 5W (37 dBm ±- 2 dB) modulation type: 16K0G1D (Biphase L encoding) transmission duration: 440 ms (short message) every 50 sec. autonomy: over 48 hours at -20°C 121.5 MHz: 121.5 MHz transmission frequencies: 121.5 MHz ± 6 kHz output power: 100mW mini (+20dBm) modulation type: 3K20A3X autonomy: over 48 hours at -20°C

1.800.235.3300 | edmo.com

183

ELTs & Accessories ELTs 406 MHz

control panel:

G-switch sensor: battery: tests and certification:

ARM / OFF / ON switch bright red LED BNC antenna connector DIN12 socket for remote control panel (RCP) and pin programming option with programming dongle internal buzzer G-switch sensor compliant with EUROCAE ED62 specifications LiMnO2 two-element battery for transmitter power supply replacement every 6 years RTCA DO-160E / EUROCAE ED-14E Section 4 to 26: C1X[ED62]A[ED62][SYLMC]EYXXXX ZXXX[ZC] [ED62]B[XXXXX]XXX[ED62] ETSO-2C91a & ETSO-2C126 (EUROCAE ED62) FAA TSO-C126 (RTCA - DO-204)

EDMO# 40501-02

MFR# S1840501-02

DESCRIPTION 406 AF Compact Kit

8

ACCESSORIES 40502-01 40502-02 40510-02

S1840502-01 S1840502-02 S1840510-02

406 AF Compact ELT mounting bracket 406 AF Compact / universal mounting bracket 406 AF Compact Inspection Kit includes: Mandatory annual inspection kit for McMurdo Kannad 406 ELTs. Kit includes an O-ring, Nylstop nuts, Torx screws, seal label, two inspection labels, and a desiccant capsule.

MCMURDO KANNAD ELT PROGRAMMING MCMURDO

PR600 ELT PROGRAMMER The PR600 programming tool works with any PC computer with USB ports and Windows 200 or XP. This part is compatible with the four ICAO-defined protocols: tail number, aircraft operator designator, serial number, 24—bit address ICAO and is designed to work with all Kannad ELTs and programming dongles as a replacement for the PR550 programming equipment. –– Kit includes: PR600 programming interface module, USB cable, instructions for programming, suit case storage and transportation

MAINTENANCE DONGLE McMurdo’s Maintenance Dongle is used to delete aircraft identification information from McMurdo Kannad ELTs for maintenance purposes. If there is any accidental transmission while using the maintenance dongle, SAR operations are not involved as the identification code that would be 20514-02 maintenance dongle transmitted is recognized by COSPAS-SARSAT as “not on board”. –– DIN-12 connector with SMM –– Equipped with a “Remove Before Flight” tag EDMO#

MFR#

DESCRIPTION

MCMURDO ELT PROGRAMMING ACCESSORIES 1201570 20514-01 20514-06 20514-02 20514-03

1201570A S1820514-01 S1820514-06 S1820514-02 S1820514-03

PR600 ELT Programmer McMurdo Programming Dongle McMurdo Programming Dongle & Assembly McMurdo Maintenance Dongle Din12 connector for use with McMurdo Kannad 3-frequency ELTs and dongles

KANNAD ELT INSTALLATION & MOUNTING COMPONENTS MOUNTING TRAYS

1201570

PROGRAMMING DONGLE ASSEMBLY The Programming Dongle is a programmable smart connector that is used to program McMurdo Kannad ELTs with aircraft identification data. This device, which is identical to the 20514-06 dongle & assembly DIN-12, stays with the aircraft and stores all pertinent aircraft programming and identification information for the CS144 Navigation Interface with the ability to also transfer aircraft data to additional or newly reprogrammed ELTs. When an ELT is connected to the programming dongle and switched to “ARM”, it automatically downloads the data from the dongle. With the dongle in place, an ELT can be removed for service and a new or reprogrammed ELT can be added without manually reinstalling aircraft programming/information. Any ELTs re-

184

moved from the aircraft retain all identification data downloaded from the dongle. The Programming Dongle Assembly consists of a male DIN-12 connected to the Programming Dongle on the ELT side and a female DIN-12 connector on the remote control panel side. –– Used in place of the DIN-12 connector and required for Navigation Interface connection –– When using p/n 20514-06, the remote switch wire harness must be fitted with a male DIN-12 connector

1.800.235.3300 | edmo.com

Standard Compact The ELT Universal Mounting fits all three-frequency ELTs as well as the McMurdo Kannad Navigation Interface Unit. It comes with a bracket and strap for securely mounting these devices within the aircraft. –– For McMurdo Kannad Compact ELTs, use the 406 AF Compact Universal Mounting Tray

ACK/AMERIKING RETROFIT KIT McMurdo Retrofit Kit for ACK and Ameri-King ELTs simplifies the process of replacing an older model ELT with a new installation. This kit includes all of the components needed to adapt a Kannad ELT installation to an existing ACK or Ameri-King footprint. –– Kit includes: mounting bracket, remote switch, DIN12 ELT connector with RJ11 cable (already wired), and an RJ11 coupler (for Ameri-King)

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

WATER SWITCH SENSOR KIT McMurdo’s water switch sensor automatically activates ELT transmission when it comes into contact with water in the event of a water landing or crash.

OUTSIDE BUZZER ASSEMBLY The outside buzzer assembly is an auxiliary buzzer for use with any McMurdo Kannad ELT in circumstances where the ELT internal buzzer cannot be heard on the ground; especially useful on large aircraft.

KANNAD REMOTE CONTROL PANELS

EDMO# 20511-01 40502-02 1202573 20514-14 20515-06

MFR# S1820511-01 S1840502-02 1202573A S1820514-14 S1820515-06

DESCRIPTION Universal mounting tray Compact Universal mounting tray Retrofit Kit for ACK/Ameriking ELTs Water switch sensor kit Outside buzzer assembly

ELT BATTERY REPLACEMENT KIT BAT300 6-year battery replacement kit for use with McMurdo Kannad 406 ELTs. –– Kit includes: #S1820506-01 battery, #0122993 label, #0124115 O-ring, #0132014 small foam wedge, #0132015 large foam wedge, #0126601 install kit. –– Kit may be used with Kannad’s 406AF, 406AFH, 406AP, 406APH, 121AF, 121AF(6D), 121AF-H

ELT BATTERY REPLACEMENT KIT BAT200 6-year battery replacement kit for use with McMurdo Kannad Integra and Compact ELTs. –– Kit includes: (1ea.) part #0141823 battery, #0145251 label inspection (EES01928), #0145250 inspection label (EES01923), #0141822 O-ring, #0141787 label seal, #0141919 foam, #0141640 foam, (4 ea.) #0145234 screw, #0136779 nut, (2 ea.) #0146261 screw. EDMO# 20516-99A 40510-01

MFR# S1820516-99 S1840510-01

8

Remote control panels allow McMurdo Kannad ELTs to be installed on an aircraft away from the pilot’s seated position in the cockpit. These remote control panels are designed to be installed in the instrument panel in order to provide the pilot with line-of-sight view to the ELT activation light and 20513-18 switch. The switch has three positions: armed, ready for use when activated by the automatic switch; on, activates immediately; and test/reset.

MCMURDO REPLACEMENT BATTERIES

DESCRIPTION ELT battery replacement kit BAT300 ELT battery replacement kit BAT200

KANNAD REMOTE CONTROL PANELS 20513-03

S1820513-03

20513-11 20513-18

S1820513-11 S1820513-18

20513-09

S1820513-09

20513-21

S1820513-21

RC100 Remote Control Panel Kit: 3-wire remote control kit to be assembled on the aircraft—ideal for situations where minimal space is available. Panel can be directly installed into the instrument panel or with other remote controls on a remote control unit RC200 Remote Control Panel and Kit: 3-wire remote control panel (and kit version) for use in GA aircraft. Simple to install—connects to the wiring loom with a SUB-D9 connector (supplied with the ELT kit version) and has the same dimensions as the Artex remote control for easy retrofitting. 20513-11 contains the switch only; 20513-18 is the kit version and includes all of the required connectors with the switch. RC300 Remote Control Panel: Entry level panel for quarter-turn fastener mounting; requires 4-5 AWG24 wires to connect to the ELT. Equipped with an internal buzzer that alerts the pilot when the unit is activated. RC102 Remote Control Panel Kit: 2-wire remote control panel kit that is ideal for retro-fitting and is compatible with legacy ACK and AmeriKing 2-wire installations—preexisting wiring does not need to be replaced. It can be directly installed into the instrument panel or with other remote controls on a remote control unit.

EDMO DISTRIBUTORS

E-04 406 ELT SERIES ACK TECHNOLOGIES INC The E-04 is a 406/121.5 MHz ELT intended for use in general and commercial aviation and is a direct replacement for the E-01 ELT. This ELT fits the E-01 mounting trays, uses the same remote control panel indicator, and the E-04 external antenna can use the preexisting E-01 anE-04 tenna mounting and wiring installation. The E-04 activates in the event of a crash and transmits a homing signal on 121.5 MHz for 48 hours while simultaneously transmitting a distress signal on 406 MHz to the Cospas-Sarsat system for up to 24 hours. Additionally, this unit can be interfaced with an aircraft’s GPS system and is capable of accepting GPS position input data from several different devices. GPS information can then be sent to search and rescue, which results in drastically reduced search times. When activated, the E-04 provides an aural alert with a simple plug-in alert indicator. –– Dual channel ELT transmits a distress signal to the Cospas-Sarsat system at 406 MHz for 24 hours (5 watts), and a homing signal on 121.5 MHz for 48 hours (100Mw) –– Can be interfaced with aircraft GPS data via an optional GPS data receiver and accepts GPS position input data from Bendix/King, Garmin (NMEA 0183 GPS) –– Antenna with molded plastic base is swept back 20 degrees –– Equipped with a simple plug-in audible alert indicator –– Relies on a lithium battery pack that provides a 5-year battery life

1.800.235.3300 | edmo.com

185

ELTs & Accessories ELTs 406 MHz

–– Compatible with Ameri-King remote panel indicator –– E-04 kit includes: 406 transmitter, lithium battery pack, external antenna, remote control, mounting tray and retaining straps, plug-in audible alert, remote cable, coax cable, and an installation manual –– E-04R kit includes: 406 transmitter, lithium battery pack, external antenna, plug-in audible alert and installation manual

weight:

dimensions: transmission:

8

power at terminal 50 Ω load:

peak EIRP with E-04.8 whip antenna and E-04.10.4 coax cable: operating/storage temperature: crash activation: tests and certification:

EDMO#

MFR#

E-04

E-04

E-04R

E-04R

ELT and battery pack: 1.6 lb (0.73 kg) ELT tray and straps: 0.2 lb (0.09 kg) remote control: 1.1 oz (31 g) audio alert indicator: 1.5 oz (43 g) 7.75 × 2.85 × 2.85 in (192 × 72 × 72 mm) frequency: 121.5 MHz +/-2 kHz and 406.037 MHz modulation: 406 MHz +/-2 kHz Bi-Phase L (16KOG1D), 121.5 MHz +/-6 kHz AM (3K20A3N) swept downward: 1400-400 Hz repetition rate: 3 Hz modulation factor ≥ 90% duty cycle: ≥ 45% 121.5 MHz 20.7 dBm 50 [email protected] -20°C 406.037 MHz 37.3 dBm 24.5 hours @ -20°C standby current armed mode: 26 uA peak current: 406 MHz burst 1.5-2 A current: 121.5 MHz operation 75 mA 121.5 MHz +23 dBm 200 mW 406.037 MHz +39.79 dBm 12.7 W operating: -20°C to +55°C storage: -55°C to +85°C 4.5 FpS +- 0.5 FpS FAA/Transport Canada TSO C-126 TSO C-91a ETSO 2C126 ETSO 2C91a COSPAS/SARSAT T.001 T.007 Industry Canada 1863A-E04AF Type: TSO C-126 AF

DESCRIPTION E-04 406MHz GPS ELT System includes: transmitter 406 & 121.5, lithium battery pack, external antenna, remote control, mounting tray & retaining straps, plug-in audible alert, remote cable, coax cable, installation manual E-04 406MHz GPS ELT System Retrofit Kit includes: transmitter, lithium battery pack, external antenna, plug-in audible alert, install manual

ACCESSORIES E-04PA

E-04PA

Pointer to ACK antenna adapter (Converts pointer 3003-18 and 3003-30 antenna to ACK E-04.8 antenna) E-04.11.17 E-04 O-ring E-04.0 E-04.0 E-04 replacement battery E-04.10.4 E-04.10.4 E-04 coax cable E-04.10.5 E-04.10.5 E-04 remote cable/black E-04.17P E-04.17P E-04 hardware kit E-04.4A E-04.4A E-04 mounting kit with mounting tray & straps E-04.5 E-04.5 E-04 ELT remote switch E-04.7 E-04.7A E-04 audio alert E-04.8 E-04.8 ELT whip antenna E-04.PK E-04.PK E-04 programmer

E-04C ELT SYSTEM ACK TECHNOLOGIES INC The E-04C ELT is a GPS-capable 406 ELT designed for use on corporate and commercial aircraft that transmits on 406 and 121.5 MHz. The E-04C is certified to TSO-C126b standard. This unit accepts data from Garmin Aviation, Bendix/King Aviation, NMEA 0183 and ARINC 429 Data. If the unit loses power, it will retain all GPS coordinates. An excellent retrofit, the E-04C fits Artex and Kannad panel cutouts. –– GPS capable ELT –– Certified to TSO-C126b standard –– Accepts Garmin Aviation, Bendix/King Aviation, NMEA 0183 and ARINC 429 Data –– Retains GPS coordinates after power is removed –– Remote fits Artex and Kannad panel cutouts

weight: dimensions: frequency: modulation:

1.6 lb (ELT & battery pack) 7.75 × 2.85 × 2.85 in 121.5 MHz & 406.037 MHz 406 MHz +/-2 kHz bi-phase L (16KOG1D 121.5 MHz +/-6 kHz AM (3K20A3N) swept downward: 1400 – 400 Hz repetition rate: 3 Hz modulation factor/duty cycle: ≥90% / ≥45% power at terminal 50 Ω load: 121.5 MHz 20.7 dBm 50 hours @-20°C 406.037 MHz 37.3 dBm 24.5 hours @ -20°C peak EIRP with E-04.8 whip anten- 121.5 MHz +22 dBm 160 mW na and E-04.10.4 coax cable: 406.037 MHz +39.79 dBm 13.7 W peak EIRP with S65-1231 whip 121.5 MHz +23 dBm 200 mW antenna and E-04.10.4 coax cable: 406.037 MHz +39.79 dBm 13.7 W crash activation: 4.5 FpS +/- 0.5 Fps battery: Lithium, certified to TSO-C142a certifications / approvals: FAA / Transport Canada, TSO -C126b TSO-C91a TSO-C142a EASA, ETSO 2C126 ETSO 2C91a TSO-C142a, Industry Canada, 1863A-E04AF, Brazil ANAC/ANTEL: TSO-C126 TSO-C142a

EDMO# E-04C E-04C.1 E-04C.2 E-04C.3

MFR# E-04C E-04C.1 E-04C.2 E-04C.3

INCLUDES Mach 1 blade antenna and full install kit 250 knot whip antenna (E-04.8) and install kit install kit only AV-300-1 350 knot rod antenna and install kit

ACCESSORIES E-04.10112 E-04.10.1.12 static suppressor for E-04.8 antenna E04.10.5-2 E-04.10.5 (25FT) black ELT remote cable, 25 feet/For use with ACK ELTs

More options available. Please visit edmo.com or call for more details.

186

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELTs & Accessories ELTs 406 MHz

406 GPS ELT EMERGING LIFESAVING TECHNOLOGIES

weight: dimensions: frequency: class 2 beacon: output power: GPS cycle time: connectors: activation: battery: self test:

remote switch: antenna:

EDMO# 406GPS 406GPS-600 406GPS-H

3.1 lb (ELT transmitter) 0.9 lb (antenna) 7.73 × 3.60 × 4.21 in (ELT only) 10.00 × 3.75 × 2.50 in (ELT with mounting tray and antenna) 406.037 MHz monitored by COSPAS-SARSAT -20°C to 55°C 5W (520ms/50sec) every 15 seconds ELT: BNC GPS: SMA accelerometer by 4.5ft./sec (2.3G) or manual activation 5-year Lithium (LiMnO2) 406 power accelerometer enabled 406 Intelligent Antenna™ Check GPS Intelligent Antenna™ Check battery power monitor systems operational indicator ON, ARM, TEST/RESET tri-color LED and aural indicator blade 114-042

MFR# ELT406GPS ELT406GPS HIGH SPEED ELT406GPS-H HELICOPTER

MFR#

DESCRIPTION

M24TG8014

M24TG8014

217-406001 217-406062 315-12-06 315-17-06 60599-035 60599-044 816-59-06

217-406-001 217-406-062

60599-044 816-59-06

406GPS remote switch to ELT connector cable/22g 8c 406GPS replacement battery pack 406GPS universal mounting tray 406GPS 6 ft RG58 coax with BNC connectors 406GPS 6 ft RG316 coax with SMA connectors 406GPS antenna install kit 406GPS ELT install kit 406GPS self test remote switch with internal aural alert

More options available. Please visit edmo.com or call for more details.

MODEL 8000 ELT SYSTEM 406/121.5 MHZ, AF POINTER INC The Pointer model 8000 series ELT transmits on both 406 and 121.5 MHz and is comprised of six interchangeable modules which ensure quick turn around times for repair or programming. Each ELT comes with a cockpit-mounted monitor and switch that provides test, reset, and RF/battery status indicators as required by RTCA DO204A. The ELT can also be controlled by a 8000-1 separate, self-contained remote switch that is powered by the ELT battery. –– Transmits on 406 and 121.5 MHz –– ELT controls include a cockpit panel monitor/switch and a self-contained remote switch –– Complies with the requirements of TSO-C126 and COSPAS/SARSAT C/S T.001 –– Cessna aircraft and Robinson helicopter conversion kits available –– Supplied with a low profile 406/121.5 MHz, 8-inch monopole antenna for use in installations designed for up to 200 knots –– Lithium battery pack meets the environmental requirements of RTCA DO-204A –– Kit includes: battery pack, mounting bracket, external antenna, coax cable, remote switch kit (see variations in table below), master switch guard kit and operation manual EDMO# 8000-1 8000-1A 8000-1P

MFR# 8000-1 8000-1A 8000-1P

8

The 406 GPS emergency locator transmitter (ELT) combines emergency beacon technology with a GPS unit that is approved for general aviation use. When in flight, the unit updates its location automatically every 15 seconds. When activated, the unit emits the standard 406 MHz emergency signal while also sending its GPS position to the Cospas-Sarsat satellites via a 5 watt signal burst every 406 GPS 50 seconds with coordinate accuracy to within 25 meters. –– Equipped with an internal GPS that’s approved for GA use and works in conjunction with Cospas-Sarsat satellites; when in flight, the GPS unit automatically updates your position every 15 seconds; when activated, the GPS emits a 5 watt signal every 50 seconds to the Global Satellite System which makes location to within 25 meters possible within one minute of activation –– Installation is fairly simple - the ELT406 GPS is mounted like most standard ELTs, the transmitter and the panel mounted remote switch/indicator can use existing hardware and cutouts from a previous unit and thanks to the built-in GPS module, an interface for an external GPS system is not needed –– Includes a dual polarized blade antenna that provides both vertical and horizontal transmission fields and is GPS passive (6 hole mount) –– Constructed with durable polycarbonate material –– Uses an owner/operator replaceable 5-year battery –– Includes 406AF ELT with multi-axis G switch, dual polarized 406/ GPS combination low speed antenna (250K TAS) with install hardware, mounting tray with multiple hole patterns and hook-andloop strap, panel mounted switch with internal buzzer, 6ft of RG58 BNC to BNC cable, 6ft of RG316 SMA to SMA cable, installation hardware (DB9 male plug, DB9 hood, DB15 male plug, DB15 hood, self test card)

EDMO#

ACCESSORIES

INCLUDES 8000 ELT System with new install remote switch kit 8000 ELT System with amp plug remote switch kit 8000 ELT System with pyle plug remote switch kit

ACCESSORIES 8009 8001-15

8009 8001-15

remote panel switch kit for Model 8000 low profile, 7-inch whip antenna for ELT 8000, 121/5/406 Mhz

DESCRIPTION ELT 406 transmitter with internal GPS ELT 406 transmitter with internal GPS with high speed blade antenna and 8-hole mount ELT 406 transmitter with internal GPS for helicopter

More options available. Please visit edmo.com or call for more details.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

187

ELTs & Accessories ELT Antennas

ELT ANTENNAS DM Q18-3 RIGID / 121.5 MHZ, 243 MHZ ITT/D&M/EDO

EDMO# DM Q18-3 MFR# Q18-3 Rigid ELT antenna with 4-hole mount.

weight: height: frequency: VSWR: connector: airspeed: FAA TSO

EDMO# AV-200 AV-200-B weight: height: frequency:

8

VSWR: airspeed: FAA TSO

12 oz 13 in 121.5 MHz 243.0 MHz 2.0:1 400 mph C91a

AV-100 WHIP ANTENNA / 121.5 MHZ 406 MHZ RAMI

EDMO# AV-100 MFR# AV-100 This passive, two-frequency wire whip antenna is designed for use with general aviation ELTs installed on low-speed aircraft.

weight: frequency: VSWR: connector: airspeed: FAA TSO

3 oz 121.5 MHz, 406 MHz 121.5 MHz 2.0:1 maximum 406 MHz 1.5:1 maximum BNC female up to 250 knots C126a

AV-200 WHIP / 121.5 MHZ & 406 MHZ RAMI The AV-200 ELT antenna is a passive, two-frequency wire whip antenna designed for use with general aviation ELTs. This antenna meets DO-160G Section 8, category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.

3 oz 24 in 121.5 MHz 406 MHz 2.0:1 max at 121.5 MHz 1.5:1 max at 406 MHz BNC female up to 350 knots C126a

MFR# AV-200 AV-200-B

COLOR white black

AV-300 ROD / 121.5 MHZ, 243 MHZ 406 MHZ RAMI

EDMO# AV-300 MFR# AV-300 The AV-300 ELT antenna is intended for use with general aviation ELTs. It is a passive, three-frequency fiberglass rod whip antenna, designed for low speed aircraft (up to 350 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown rotor frequencies.

weight: height: frequency: VSWR: material: efficiency: max power: connector: airspeed: FAA TSO approvals:

9 oz 14 in 121.5 MHz, 243 MHz, 406 MHz 2.0:1 @ 121.5 MHz 2.0:1 @ 243.0 MHz 1.5:1 @ 406.0 MHz fiberglass >85% 10W CW BNC female 350 knots C126a meets RTCA DO-204 and DO-160C requirements, EUROCAE ED62/ED14C, MIL-A-6271, MIL-A-7772, MIL-A-9094, MIL-E-5272, MIL-E-5400, MIL-B-5087

AV-400-SERIES ROD WHIP / 121.5 MHZ, 243 MHZ, 406 MHZ RAMI The AV-401 and AV-402 are passive, three-frequency fiberglass rod whip antennas for use with general aviation ELTs. These antennas are designed for use on low-speed aircraft flying at speeds up to 350 knots.

AV-401

188

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

ELTs & Accessories ELT Antennas

ROD / 121.5 MHZ, 243 MHZ, 406 MHZ weight: height: frequency: VSWR:

6.24 oz 15.25 in 121.5, 243, 406 MHz 2.0:1 max @ 121.5 MHz 2.5:1 max @ 243 MHz 1.5:1 max @ 406 MHz 50 Ohms nominal fiberglass BNC female (AV-401, AV-402) TNC female (AV-402 only) up to 350 knots C126b

impedance: material: connector: airspeed: FAA TSO

EDMO# AV-401 AV-402

MFR# AV-401 AV-402

CONNECTORS BNC female BNC female, TNC female

110-340 BLADE / 121.5 MHZ, 243 MHZ, 406 MHZ ACR ELECTRONICS INC.

EDMO# 110-320 MFR# 110-320 The Artex 110-320 antenna is designed with a glass-reinforced, polyester housing and uses proprietary Tri-Band technology to provide signal transmission on 121.5, 243, and 406 MHz with 10 dB of isolation between ports. Use #280-0320, optional gasket for 110-320 for installation.

weight: height: frequency: VSWR: polarization: radiation pattern: impedance RF: power rating: connector: altitude: color: gasket:

0.45 lb 15.5 121.5, 243, 406 MHz 2.0:1 – 121.5/243 MHz 1.5:1 – 406 MHz vertical omni-directional 50 Ohms (nominal) 25 watts BNC (female) for 121.5/243 MHz TNC (female) for 406 MHz 55,000 ft white B31725

8

EDMO# 110-340 MFR# 110-340 Tri-Band blade high-speed antenna is equipped with innovative Tri-Band technology, bringing the 121.5, 243, and 406 MHz frequencies into a compact package. The 110-340 offers a single connector for those installations that require this set-up.

ACR ELECTRONICS INC. / ARTEX

110-324 WHIP / 121.5 MHZ, 243 MHZ ACR ELECTRONICS INC. / ARTEX

weight:

9 oz

height: frequency: VSWR:

14 in 121.5 MHz, 243 MHz, 406 MHz 2.0:1 @ 121.5 - 243 MHz 1.5:1 @ 406.0 MHz molded blade polyurethane enamel BNC female 55,000 ft 350 knots C126a

material: finish: connector: altitude: airspeed: FAA TSO

ANT100 PORTABLE WHIP / 121.5 MHZ, 243 MHZ, 406 MHZ MCMURDO

EDMO# 0124206 MFR# 0124206 Kannad’s ANT100 is an auxiliary whip antenna that can be paired with any Kannad ELT to essentially make it a portable survival unit. Antenna stores under the ELT tray VELCRO® mounting strap.

EDMO DISTRIBUTORS

EDMO# 110-324 MFR# 110-324 The 110-324 is a dual-band black whip antenna with an inductor. Transmits on 121.5 and 243 MHz and designed for speeds up to 200 knots TAS. –– Compatible with ELT 110-4, ELT 200, and ELT 110-406

height: frequency: VSWR: connector: altitude: color:

17.4 in 121.5, 243 MHz 2:1 – 121.5/243 MHz BNC (female) for 121.5/243 MHz 50,000 ft black

1.800.235.3300 | edmo.com

189

ELTs & Accessories ELT Antennas

110-406 WHIP / 406 MHZ ACR ELECTRONICS INC. / ARTEX

EDMO# 110-329 MFR# 110-329 Whip type, single-band ELT antenna for use with Artex ELT 110-406. The 110-329 transmits on 406 MHz only. Nickel finish. –– Compatible with ELT 110-406

8

height: frequency: VSWR: connector: altitude: temperature: color:

7 in 1.5:1 – 406 MHz 2:1 – 121.5/243 MHz TNC (female) for 406 MHz 50,000 ft -55°C to + 85°C nickel

weight: height: frequency: VSWR: connector: altitude: temperature: color:

0.45 lb 15.5 in 121.5, 243, 406 MHz 2.0:1 – 121.5/243 MHz, 1.5:1 – 406 MHz BNC (female) for 121.5, 243, 406 MHz 50,000 ft -55˚ C to + 85˚ C white

110-343 WHIP / 121.5 MHZ, 243 MHZ, 406 MHZ ACR ELECTRONICS INC. / ARTEX

EDMO# 110-343 MFR# 21-41 The Artex 110-343 ELT whip type antenna uses Tri-Band technology to provide signal on 121.5, 243, and 406 MHz frequencies. This antenna is compatible with the C406-1 ELT.

110-337 BLADE / 121.5 MHZ, 243 MHZ, 406 MHZ ACR ELECTRONICS INC. / ARTEX

EDMO# 110-337 MFR# 110-337 The 110-337 is a Tri-band, dual-input blade antenna that uses Artex’s Tri-Band technology to transmit on 121.5, 243, and 406 MHz frequencies. The 110-337 is equipped with a two-connector setup.

weight: height: frequency: VSWR: connector: altitude: temperature: color:

1.3 lb max 7.75 in 121.5, 243, 406 MHz 2.0:1 – 121.5/243 MHz, 1.5:1 – 406 MHz BNC (female) for 121.5/243 MHz TNC (female) for 406 MHz 50,000 ft -55˚ C to + 85˚ C white

weight: height: frequency: VSWR: connector: altitude: temperature: color:

0.31 lb 17 in 121.5, 243, 406 MHz 2.5:1 – 121.5/243 MHz, 1.5:1 – 406 MHz BNC (female) for 121.5, 243, 406 MHz 55,000 ft -55˚ C to + 85˚ C white

110-773 WHIP / 121.5 MHZ, 406 MHZ ACR ELECTRONICS INC. / ARTEX

EDMO# 110-773 MFR# 110-773 The Artex ELT antenna is a dual-band antenna designed for use with the ME406-series ELTs.

110-338 ROD / 121.5, 243 AND 406 MHZ ACR ELECTRONICS INC. / ARTEX

EDMO# 110-338 MFR# 110-338 The 110-338 antenna uses Artex’s Tri-Band technology to provide signal on 121.5, 243, and 406 Mhz. This antenna is equipped with a single BNC connector for installations that require a single connector setup. Constructed with a durable, glass-reinforced polyester housing.

190

1.800.235.3300 | edmo.com

weight: height: frequency: VSWR: connector: altitude: temperature: color:

0.18 lb 15 in 121.5, 406 MHz 2.0:1 – 121.5, 1.5:1 – 406 MHz BNC (female) for 121.5 and 406 MHz 55,000 ft -55˚ C to + 85˚ C black

EDMO DISTRIBUTORS

ELTs & Accessories ELT Test Sets

ELT TEST SETS ARTEX ETS ELT TEST SET ACR ELECTRONICS INC. / ARTEX

dimensions: weight: frequency range: decoding: operating system: memory: operating temperature range: storage temperature range humidity: battery type: battery voltage & capacity: current consumption:

6.7 × 5.7 × 1.53 in (without antenna) 1 lb (with antenna) 406 Mhz (-60 dBm to 36 dBm), 5 watt signal Per Cospas-Sarsat C/ST.001 (issue 3, revision 5) Windows CE 5.0/Garnet OS 5.4 volatile: 64 MB SDRAM non-volatile: 128 MB Flash expansion: via MZIO™ bus standard -10°C to 60°C

dimensions: RF range (using internal antenna): RF input VSWR: RF input level:

10 MHz REF input VSWR: 10 MHz REF input level: operating temperature range: storage temperature range: internal temperature sensor accuracy: RF input cable termination: 10 MHz REF cable termination:

BT100: 1.71 × 2.3 × 0.50 in BT100 in PDA: 3.03 × 5.51 × 0.67 in hard case: 12.75 × 10.75 × 4.5 in 406 MHz: > 15 m 121.5 MHz/243 MHz > 3 M 1.10:1 406 MHz burst: -13 dBm Min / +40 dBm Max 121.5 MHz/243 MHz: -28 dBm Min / +30 dBm Max 1.15:1 -10 dBm Min / +10 dBm Max 0°C to +50°C -20°C to +60°C ±0.5°C

8

EDMO# 8701 MFR# 8701 The 406 MHz ETS ELT test set allows technicians to easily verify a beacon’s ID after installation or reprogramming. The ETS ELT test set is a rugged, waterproof handheld device that can read the beacon ID transmitted from an Artex 406 MHz ELT. The beacon ID and its encoded data is displayed on the display and saved and timestamped to an internal database. The beacon can be read over the air (in test mode or in a shielded enclosure), or by transmitting directly into the reader for beacons with external antenna connections. –– Records all data to a internal database where it can then be backed up to a PC –– Data can be viewed on the PC independent of the ELT test set –– Prints records directly to a serial or infrared (IrDA) enabled printer –– Low cost infrared adapters available to turn any printer with a parallel port interface into an infrared printer

–– Receives all Cospas-Sarsat past, current, and future frequency channels –– Decodes all Cospas-Sarsat protocols –– User can add text or audio notes to each measurement –– External coax allows direct connection between ELT and tester (no external attenuator required) –– Direct connection power measurement accuracy to ± 1 dB on 406 MHz –– Comes equipped with easy to use software –– Internal antenna receives 406 burst from over 15 meters away –– Stores hundreds of measurements –– Detailed calibration data is included with each Certificate of Calibration –– Meets and exceeds FAA, IC and EuroCAE ELT inspection requirements –– Includes: BT100AV series ELT tester, custom zipper pouch, RF input interface cable, 10 MHz REF interface cable, operators manual, watertight storage box, and PDA (includes AC adaptor, PC interface cable, PDA software CD

BNC-female SMA-female

-20°C to 65°C 5% to 90% relative humidity (non-condensing) lithium ion, custom battery pack 7.3 volts nominal; 1700 mAh

EDMO#

MFR#

BT100AVS

910-BT100AVS

BT100AVT

910-BT100AVT

BT100AVT-R BT100AVS-R

910-BT100AVT-R 910-BT100AVS-R

power on: 130mA typical (Meazura only, backlight off) full system: 60mA typical (backlight on) sleep mode: 7mA typical

BT100AV ELT TESTER SERIES WS TECHNOLOGIES The BT100AV series of ELT testers accommodate an array of testing needs 406 ELTs (as well as EPIRBs and PLBs) including code verification, annual inspections, certifications, and troubleshooting. The BT100AV series measure all 121, 243 and 406 MHz parameters and provide 406 MHz graphic measurements for power, phase modulation, and spectrum while also providing the user with real-time audio on 121.5 or 243 MHz. The BT100AVS device(s) are also capable of measuring 406 MHz frequency stability in addition to the previously listed measurements. BT100AVT-R. –– Provides complete 406, 121.5, and 243 MHz channel measurements (and 121 or 121/243-only beacons)

EDMO DISTRIBUTORS

DESCRIPTION ELT Tester: measures frequency stability in accordance with C/S T.007 with user controlled test duration and real-time results monitoring with data output in a delimited text file for use within other programs ELT Tester: 406 MHz graphic measurements, purchase BT100AVS if frequency stability measurements are required durable ruggedized versions of the BT100AVT and BT100AVTS

ACCESSORIES 415-PHP006

415-PHP006

BT100AVT replacement battery

1.800.235.3300 | edmo.com

191

ELTs & Accessories ELT Test Sets

FBM200A 406 MHZ ELT BEACON MONITOR

8

WS TECHNOLOGIES

EDMO# FBM200A MFR# 910-FBM200A The 406 ELT Beacon Monitor from WS Technologies, Inc. provides real-time monitoring for all Cospas Sarsat 406 MHz beacon transmissions. This device displays and decodes 406 messages with the ability to automatically receive all past, present, and future Cospas Sarsat channels. All information is organized in an XML format for use in a database; additionally, information can be time-stamped and data logged. A GPS antenna and receiver allow the user to obtain precise geographical data which is then automatically mapped to Google Earth™, making it easy to view the GNSS location data with Google’s detailed array of mapping features. Users can connect it to their PC via USB or Ethernet cables - the latter has the added benefit of allowing users remote management and diagnostics options. –– Monitors 406 ELTs in real time, displays and decodes messages, measures and displays RSSI (receiver signal strength), and displays distance to beacon –– Automatically receives all past, present, and future Cospas Sarsat channels with -125 dBm sensitivity (software adjustable sensitivity) –– Automatically maps the location of the decoded GNSS location data into Google Earth™ for easy viewing and access to a detailed geographical interface –– Data is XML formatted for use in database applications –– Can send alerts via email and/or SMS text messaging –– Capable of logging data with a time stamp –– Connects to user PCs with a USB cable or Ethernet interface which allows for remote management and diagnostics; power is supplied through connection to a PC USB port or an AC adapter –– Multiple units can be connected together for a wider range of coverage –– Rugged aluminum design can sit on a desk or be mounted on a wall –– Includes USB cable (2 meter length), AC to USB adapter, ethernet cable (2 meter length), molded 406 MHz monopole antenna, GPS active antenna (5 m cable length), certificate of calibration, operator’s manual, and user interface software –– Optional components: high performance outdoor antenna

weight: dimensions: 406 MHz receiver sensitivity: out of band rejection (<400 MHz, > 413 MHz): harmonic image rejection: 406 MHz input frequency: 406 MHz RF input VSWR: 406 input impedance: 406 input connector: GPS antenna port bias/connector: GPS antenna connector: receiver power requirements (from USB port): operating temperature range: storage temperature range:

192

0.5 lb 4.3 × 2.5 × 1.0 in -125 dBm > 145 dB > 95 dB 406.0 - 406.1 MHz 1.20:1 50Ω SMA-female RP +3.3V @ 40 mA max SMA female +5 V @ <500 mA -40˚C to +85˚C -55˚C to +85˚C

1.800.235.3300 | edmo.com

ELT TESTER KIT FOR 121.5, 243 & 406 MHZ ELTS ICARUS INSTRUMENTS, INC.

EDMO# ELTT-124K MFR# ELTT-124K The multi-band ELTT-124K 406 MHz ELT Test Set from ICARUS Instruments measures ELT power and frequency on all three ELT bands. This test set receives and measures 406 MHz, 121.5 MHz, and 243 MHz frequencies while also measuring radiated RF. It’s also equipped with an advanced 406 message decoder that verifies the proper transmission of GPS data while also measuring the duration of phase deviation and 406 packet burst. The unit stores up to 10 sets of ELT data, which can be imported into a PC database. The set provides two means of data transfer with an included antenna, direct connection cable, and attenuator. –– Measures frequency and radiated RF power on all 3 ELT bands including 406 MHz, 121.5 MHz, and 243 MHz including planned 406 MHz bands –– Has a sophisticated 406 message decoder that verifies that GPS data is being properly transmitted, and measures the time interval of the 406 transmit packet –– Tester demodulates and decodes data stream to HEX ID, GPS latitude and longitude, country code, and 24-bit ICAO address –– Receives all messages from any 406 MHz COSPAS-SARSAT beacon—this includes test mode signals and signals sent during alert/ emergency mode –– Stores up to 10 sets of ELT data for importing into a PC database (software package included) –– Dual input design includes an antenna or the ELT can be connected to the tester via an included cable and attenuator –– Inexpensive two-year calibration cycle –– Set includes ELTT-124 tester, antenna, attenuator with 2 cables, PC USB cable, a user manual, and a custom 2100 pelican case with foam insert

frequency:

406 MHz accurate to ±500 Hz 121.5 MHz accurate to ±300 Hz 243 MHz accurate to ±300 Hz RF power: 406 MHz channel in range 19 - 43 dBm / accuracy ± 0.5 dB (antenna: -34 to -10dBm ±2dB) 121.5 MHz channel in range 13 to 20 dBm / accuracy ± 0.5 dB (antenna: -40 to -34 dBm ±2 dB) 243 MHz channel in range 13 to 20 dBm / accuracy ± 0.5 dB (antenna: -40 to -34 dBm ±2dB) power supply: 4 AA batteries or USB cable battery life: approx. 6 hours calibration cycle: 2 years power use: no more than 130 mA - standby mode/no LCD highlighting no more than 200 mA - standby mode w/ LCD highlighting no more than 300 mA - measure mode w/ LCD highlighting accuracy: measures positive / negative phase deviation value accurate to ± 2.8° measures total transmission time of 406 MHz signal with accuracy ± 0.2% measures preamble of 406 MHz signal with accuracy ± 0.2% GPS position provided in degrees, minutes, seconds data decoding:

EDMO DISTRIBUTORS

ELTs & Accessories ELT Batteries

ELT BATTERIES ELT BATTERY PACKS MERL, INC.

BP-1005

BP-1010

BP-1015

BP-1020

BP-1026

BP-1030

8

BP-1045 EDMO#

MFR#

COMPATIBLE ELTS

TYPE

BP-1005 BP-1010 BP-1015 BP-1020 BP-1026 BP-1030 BP-1045

BP-1005 BP-1010 BP-1015 BP-1020 BP-1026 BP-1030 BP-1045

Larago Narco Sharc 7 D&M 6.0 and 8.0 CCC CIR 11 Pointer 3000/3000-1 EBC 102 and EBC 302

2 year 2 year 2 year 2 year 2 year ---

POINTER ELT BATTERY PACK POINTER INC

EDMO# 2020-0 MFR# 2020 The 2020 alkaline battery pack supplies 7.5 volt power to Pointer model 3000 and 4000 series ELTs. The 2020 protect factory fresh cells from shock and thermal vibration in accordance with regulations using a patented formed-foam body that fits snugly inside the ELT. TSO-C91a certified.

EDMO DISTRIBUTORS

EDMO: BIG SELECTION, PRODUCTS YOU KNOW & NAMES THAT YOU TRUST. As a class-leading aviation distributor, EDMO keeps pace with the trends of the aerospace industry. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we will have what you’re looking for. Give us a call at 1.800.235.3300 or visit edmo.com for parts and pricing.

1.800.235.3300 | edmo.com

193

Airband Communications

Panel Mount Transceivers................................................................................. 196 Satcom.............................................................................................................. 202 Airband Handhelds............................................................................................ 204 Scanners........................................................................................................... 207

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

195

Airband Communications Panel Mount Transceivers

PANEL MOUNT TRANSCEIVERS

nominal transmitter power: certification:

6 watts (TY91) 16 watts (TY92) TSO-C169a, TSO-C128a, ETSO-2C169a, ETSO-2C128,

9

TY91 & TY92 25 KHZ/8.33 KHZ VHF RADIOS TRIG AVIONICS LIMITED

EDMO#

Designed for GA and light sport aircraft, Trig Avionics’ TY91 and TY92 are certified 25 kHz/8.33 kHz VHF radios that are compact and lightweight—making them ideal for panels with limited space. Both standard units consist of a radio hardware unit and a control head that can be mounted in a standard 2.25 inches round hole. In addition, Trig offers a Dual Control Kit version for both the TY91 or TY92 that allows two radio controllers to integrate with a single Trig radio hardware box; this configuration is ideal for training and flight school use. Users can choose from one of two power output options depending on their needs; the TY91 has a power output of 6 watts and the TY92 has a power output of 16 watts to accommodate longer-range transmissions. –– Single and dual control features –– Provides more installation options while saving space with a control head and separate radio hardware –– Certified 25 kHz and 8.33 kHz VHF transceiver –– Requires minimal space and weight—can be mounted in a 2.25inch round hole or in a smaller compact mount; when installed, the control head is only 3 inches deep, meaning it can be installed in a panel where a single radio box doesn’t fit –– Equipped with 9 programmable memories and a dual watch function that allows users to monitor standby frequency –– Perfect partner for Trig’s TT21 and TT22 Mode S transponders –– Approved for fitting to European and FAA-registered aircraft –– FAA TSO and EASA ETSO certification –– Includes a built-in speaker amplifier and two place intercom –– Easily operable with gloves –– Dual Control Features –– Ideal for flight training and two-place tandem aircraft and gliders; “smart set” feature automatically duplicates menu settings on each controller to prevent confusion while a clear display allows both pilots to see selection being made –– Common features between both controllers include volume adjustment, frequency selection, transmit, and flip-flop –– Includes safety features for flight schools that allow the flight instructor to override the student if necessary –– TY91/92 complete kits include: TC90 control head (00857-00), radio box unit, mounting tray, install kit [(01453-00) hardware to make wiring harness and install unit, plus manual]

TY91 VHF TRANSCEIVER

weight: dimensions:

1 lb (standard) 1.73 × 2.5 × 1.4 inches (controller) 1.89 × 2.6 × 6.3 inches (radio unit with socket) supply voltage: 11-33 V (TY91) 22-33 V (TY92) typical current consumption: 200 mA receive 2A transmit at 14 V (TY91) 130 mA receive 2.5A transmit at 28 V (TY92)

196

1.800.235.3300 | edmo.com

00883-00 01079-00 01451-00

MFR# 00883-00 01079-00 01451-00

DESCRIPTION remote unit complete kit dual control unit

TY92 VHF TRANSCEIVER 00881-00 01080-00 01452-00

00881-00 01080-00 01452-00

remote unit complete kit dual control unit

01453-00 01454-00

TY91/TY92 install kit with manual TC90 controller for TY91/92

ACCESSORIES 01453-00 01454-00

TY96 & TY97 25 KHZ/8.33 KHZ VHF SLIMLINE RADIOS TRIG AVIONICS LIMITED The TY96 and TY97 aviation radios provide 25 kHz and 8.33 kHz channel spacing in a space-saving slim-line design. The TY96 is a 10-watt model intended for general aviation and light sport use. Conversely, the TY97 accomTY96 modates high performance aircraft with a 28 volt power supply. The TY97 is a 16-watt certified radio capable of transmitting and receiving over long distances and from high altitudes. These radios are engineered to save stack space with a slim-line design that measures only 1.3 inches high. Both radios have a bright, clear display that shows primary and secondary frequencies along with ICAO or custom set airfield identifiers. A “Push Step” knob saves time adjusting between 8.33 kHz and 25 kHz and a Dual Watch feature allows the pilot to monitor two frequencies at once—almost like having two radios in one. Both radios also have a “Say Again” feature that relays the last transmission with a press of a button (without requiring a repeat message from air traffic control) and a one touch emergency button automatically sets 121.5 MHz, along with mic and volume levels. Each radio has a built-in two-place intercom with auxiliary inputs for stereo music and audio warnings. Additionally, both radios can integrate with a GPS (SL40 protocol) to automatically display frequencies as they are required along the flight route. –– 25 kHz and 8.33 kHz channel spacing with “Dual Watch” function for dual frequency monitoring –– Slim-line design measures only 1.3 inches high and is highly efficient—no cooling fans required –– Bright, clear display with simple user interface and unique “Push Step” button for faster tuning –– Stereo music/two-place intercom –– “Say Again” feature for repeated playback of last transmission –– Emergency button automatically sets 121.5 MHz –– USB port makes it possible to upload airfield databases containing 200+ preferred frequencies and identifiers –– Ideal for retrofits; integrates with legacy radios including: KY 196A, KY 197A and SL 40 models –– Free EASA minor change template available

EDMO DISTRIBUTORS

Airband Communications Panel Mount Transceivers

weight: dimensions: supply voltage (DC):

2.09 lb 1.30 × 6.26 × 9.05 inches 11-33 V (TY96) 22-33 V (TY97) typical current consump14 V – 265 mA (TY96) tion in receive mode: 28 V – 140 mA (TY97) nominal transmitter power: 10 watts (TY96) 16 watts (TY97) certification: TSO-C128a, TSO-C169a, ETSO 2C128, 2C169a

EDMO#

MFR#

DESCRIPTION

01227-0001 01227-00-01 TY96 VHF 10-Watt Transceiver complete system 01229-0001 01229-00-01 TY97 VHF High Power Transceiver complete system

ACCESSORIES 01650-00

01650-00

install kit for TY96/TY97

TMA44 & TMA45 AUDIO PANELS TRIG AVIONICS LIMITED

TMA44 STANDARD The TMA44 is a mono panel that supports 2-4 seats with independent control of crew and passenger audio. This unit is equipped for navigation and IFR flight with switched inputs for NAV 1, NAV 2, ADF, AUX and DME and also includes two additional unswitched inputs for audio alerts. The TMA44 also incorporates a smooth fade feature that automatically lowers music levels in favor of incoming radio communication. –– Supports 2-4 seats –– Equipped with a smooth fade feature –– Simple, intuitive interface –– Includes marker beacon receiver with indicators –– Adjustable panel illumination –– EASA and TSO certified

weight: dimensions: audio panel: mic frequency response – 3 dB music frequency response – 3 dB headphone impedance: headphone output – each headset (no clipping): speaker output - 14 volt DC /28 Volt DC: supply voltage: temperature range:

0.6 kg 6.26 × 1.29 × 7.76 in TMA44: 2-4 seats – mono TMA45: 2-6 seats - stereo TMA44: 350 Hz – 600 Hz TMA45: 300 Hz – 600 Hz TMA44: 200 Hz – 15 kHz TMA45: 20 Hz – 20 kHz 150 – 1000 W TMA44: 45 mW TMA45: 38 mW 3 watts / 10 watts 11-33 volts DC operating: -20°C to +55°C storage: -40°C to +85°C

The iCloth: a screen-cleaning solution. iCloth® wipes keep glass surfaces in the panel free of dust, streaks, fingerprints, and static with aviation grade Dupont™ Sontara® fabric. See parts ICA24, IC100, and ICA500 on page 124.

9

The TMA44 and TMA45 audio panels provide a streamlined, intuitive, high-quality interface for controlling onboard navigation, communications, and entertainment. The TMA Series is available in two versions, the TMA44 Standard and the TMA45 Superior with variations to suit user’s needs. Both units provide comprehensive audio features for VFR and IFR flight, include an ILS marker beacon indicator, are compatible with many third-party radio and NAV/COM products, and are designed to fit into a standard avionics rack for simplified installation.

noise from radio static for an enhanced audio experience. Integrated Bluetooth® connectivity allows the TMA45 to be connected to up to two portable electronic devices for added entertainment and communication options (such as cell phones). –– Supports 2-6 seats –– Bluetooth® technology supports wireless use of mobile phones and music –– Incorporates Trig Digital Noise Reduction and Trig Active Mute –– Simple, intuitive interface

TMA45 SUPERIOR The TMA45 is a fully featured panel that provides high quality audio, stereo music, and Bluetooth® mobile phone support for 2-6 seats. Like the TMA44, this unit incorporates its technical features into a logically designed interface but builds on this platform by adding industry leading Trig Digital Noise Reduction (TDNR). This feature reduces cockpit noise by automatically selecting the optimum level of squelch and mic threshold for an improved audio environment. The TMA45 also incorporates Trig Active Mute (TAM) technology that removes unwanted background

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

197

Airband Communications Panel Mount Transceivers

IC-A120 VHF AIRBAND TRANSCEIVER ICOM AMERICA INC

weight: dimensions: power requirements: frequency coverage:

3.3 lb 6.3 × 1.77 × 7.6 in 13.75 V or 27.5 VDC (automatic selection) 118 – 136.992 MHz

EDMO DISTRIBUTORS

channel spacing: memory channels: operating temperature: current drain:

EDMO#

MFR#

IC-A120 IC-A120B

25 kHz / 8.33 kHz 200 -20°C to +55°C TX High: 5.0A max. RX Stand-by: 500 mA max. RX Max. audio: 4.0A max.

DESCRIPTION VHF airband transceiver / vehicle mount commercial base station

ACCESSORIES OPC-344 OPC-478 OPC-592 OPC-871A CS-A120 HM-216 SPC-8 K220A

OPC-344 OPC478 OPC592 OPC871A CSA120 HM216 SPESPC8 K220A

DC power cable for IC-A120 cloning cable/PC to radio adapter cloning cable headset adapter for IC-A120 IC-A120 programming software standard microphone for IC-A120 aluminum weatherproof PA speaker for IC-A120 30-inch whip vehicle mount antenna 118-136 MHz / includes 12 ft coax cable with PL-259 connector and magnetic base for vehicle mount

IC-A220 VHF AIRBAND TRANSCEIVER ICOM AMERICA INC The IC-A220 VHF Airband Transceiver improves on the features of its predecessor with a wide, bright display with a 170-degree viewing angle and an automatic squelch function. The ICA220’s wide-angle display uses the same bright, organic light emitting diode (OLED) display as its predecessor, complete with white backlighting to produce crisp, bright lettering on a black background. The automatic squelch function adjusts the squelch level to maintain a received call by monitoring the signal level while a manual squelch function allows the pilot to instantly adjust the squelch level as needed. The IC-A220 provides a few different functions to make channel selection easier including a mode to flip-flop between channels, monitor two channels simultaneously, or record the last 20 channels used with the auto stack memory. Additionally, this unit also has a built-in, voice-activated intercom function that allows the pilot to talk with the copilot via a headset (adjustable audio level and squelch control functions are also provided). A GPS memory function allows the IC-A220 to receive and store GPS data when connected to an external GPS receiver. –– Equipped with 20 regular memory channels with a 6-character channel name; can be organized into 50 group memory channels (10 ch × 5 groups) with a channel tag –– Built-in DC-DC converter accepts 12- and 24-volt power source –– 8.88 kHz/25 kHz channel spacing (depending on version) –– NOAA weather channel receive (USA version only) –– One touch access to 121.5 MHz emergency frequency –– Side tone function ANL (automatic noise limiter) function –– Remote control capability –– PC programmable –– Slim 1.34-inch height for installing in a limited panel space –– D-SUB 25-pin connector for easy installation –– Two types of menu mode; settings and configuration menu

1.800.235.3300 | edmo.com

9

Icom’s IC-A120 Mobile Airband Transceiver is equipped with a crisp, clear, dot-matrix display; active noise cancellation (ANC) and automatic noise limiter (ANL*) technology; and straightforward programming and settings options that are accessible from the front panel. The IC-A120 meets IP54 standards for dust-protection and water-resistance and can be connected to an optional Bluetooth® unit for compatibility with third-party wireless Bluetooth® headsets. –– Dot-matrix LCD display is easy to read with crisp, clear text (displays alphanumeric characters and icons) –– Memory channels and other radio settings can programmed from the front panel (customizing functions can be restricted as needed, depending on the radio settings); this unit provides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacing –– Built-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signals; the automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time) –– IP54 dust-protection and water resistant construction allows the IC-A120 to be used in open-air vehicles –– ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger; the ONHook dualwatch feature checks the priority and operating channels alternatively while ON-Hook; when the microphone is taken OFF hook, scanning stops at the priority channel or the displayed channel –– Provides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added; this allows a third-party wireless Bluetooth headsets to be used with the IC-A120 (when using an optional VS-3 Bluetooth headset the side tone function becomes available) –– Third-party headsets can be used with the optional OPC-871A headset adapter; when configured this way, the user can use the side tone function to monitor his or her own transmitted voice via the connected headset—even when using a hand microphone –– Optional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built in speaker; the speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functions –– Compatible with 12- and 24- volt systems –– 36W (PEP) RF output power –– Dualwatch and priority scan functions –– Power on password protection –– PC programming capability –– CI-V Commands for external control –– VE-PG3 RoIP gateway for interconnect with other radio devices –– Accessories include hand microphone (HM-216), DC power cable, microphone hanger kit, mounting bracket kit, and fuses

199

Airband Communications Panel Mount Transceivers

weight: dimensions: power requirements: frequency coverage: channel spacing: memory channels: operating temperature: current drain:

EDMO# IC-A220 IC-A220B IC-A220M

2.2 lb 6.3 × 1.34 × 10.67 in 13.8 V or 27.5 VDC TX: 118 – 136.992 MHz RX: 118 – 136.992 and 161.650 – 163.275 MHz 25 kHz / 8.33 kHz 20 -20°C to +55°C TX High: 5.0A max. RX Stand-by: 500 mA RX Max. audio: 4.0A

MFR# IC-A220 IC-A220B IC-A220M

DESCRIPTIONS panel mount base station vehicle mount

weight: dimensions: frequency range: channel spacing: mode: number of memory channels: acceptable power supply: usable temp. range: frequency stability: current drain: exposed dial face: certification: transmitter:

ACCESSORIES PS-80-05

PS-80-05

HM-176 SP-35

HM176 SP-35

base station power supply. Includes HM-176 hand mic and MBA-3 mounting bracket hand microphone 5W external speaker

FL-760A VHF COMM TRANSCEIVER

9

FLIGHTLINE

200

EDMO# FL-760A MFR# FL-760A The FL-760A is extremely small and one of the lightest radios in the industry at just under 1 lb in weight (replaces the FL-760). It provides a frequency range of 118 to 137 MHz with a 5 watt transmitter and 11 - 33 volt power supply. The built-in 2-place VOX intercom is sensitive and perfect for small aircraft cockpits. Users can switch between frequencies with the “flip/flop” option or use scan mode to sift through 32 programmable frequencies; additionally, there is a single button relegated to the 121.50 emergency frequency only. The FL-760A now offers updates to the original: Push-to-Talk (PTT) feature and audio inputs are separate for pilot and co-pilot. Also, intercom, VOX, volume and mic gain adjustments are now conveniently programmable from the front panel. This transceiver is ideal for noisy cockpits; it provides clear reception and output and minimal squelch. –– Built-in 2-place VOX intercom –– Easily select channels via the 32 programmable memory channel call-up, emergency button, or scan function –– Not plug compatible with certain features (power and ground are plug compatible) –– Separate PTT and audio inputs for pilot and co-pilot –– Intercom, VOX, volume and mic gain adjustments are programmable from front panel –– Less than 1 lb in weight –– Backlit display for easy reading –– Pilot can select the receive notification LED color via the front panel

1.800.235.3300 | edmo.com

antenna impedance:

0.9 lb 2.25 × 6.3 in 118.00 to 136.975MHz (Receive:108.00 to 136.975MHz) 25kHz AM (6K00A3E) 32 11.7 to 33 VDC (Negative ground only) -20C°to +60C° +/- 5ppm TX: 3A(max) RX 0.8A(max) Standby: 300mA 2 1/4.5 inches NOT TSO output power: 5 W (carrier), 16W (pep) modulation: small stage modulation modulation limiting: 70 to 100% audio harmonics distortion: less than 15% (at 85% modulation) hum and noise ratio: more than 40dB spurious emissions: -16dBm or less 50Ω

FL-M1000A VHF RADIO 118.0 TO 136.975 MHZ The FL-M1000A is a land mobile airband radio designed for vehicular (non-aircraft) use. This radio operates on 118-136 MHz frequency and provides various built-in scan functions. The user can operate this radio with either a handheld microphone or headset and choose either the external speaker or headphone for audio output. –– Easy to install in any vehicle –– Highly visible alpha numeric display –– Provides multiple scanning functions –– Operates in the 760 Channel VFO mode –– Simple to program –– Compatible with a standard push-to-talk switch and air band headset –– Priority scanning –– Multiple speakers, antennas, cables and programming options –– Front panel control of external speaker –– Includes MP-100 hand mic, 1 mic hanger and screws, 1 ten-foot DC power cable with 10 amp fuse, and 1 mounting bracket kit

weight: dimensions: frequency range: output watts: channel spacing: mode: number of memory channels: antenna connection:

4 lb 5.9 × 7.5 × 2.0 in 118.0 - 136.975 MHz 9.44 25 kHz 6K00A3E 99 SO-239 *connector jack of FL-M1000A is SO-239

EDMO DISTRIBUTORS

Airband Communications Panel Mount Transceivers

power supply requirement: current drain (at 13.75VDC): operating temperature range: frequency stability: transmitter:

receiver:

FL-M1000A

MFR#

DESCRIPTION

FL-M1000A

VHF radio 118 – 136.9 MHz

ACCESSORIES K220A

K220A

30-in whip vehicle mount antenna 118-136 MHz includes 12 ft coax cable with PL-259 connector and magnetic base for vehicle mount

TKM REPLACEMENT RADIOS TKM

MX 385 NAV/COMM RADIO The MX 385 is electrically and mechanically interchangeable with the RT385 and RT485. The MX 385 operates on 27.5 VDC with 3.0a minimum current in transmit.

weight: dimensions: frequency range: frequency stability: transmitter power: modulation: sidetone: receiver sensitivity:

4 lb 6.32 × 2.5 × 11.1 in mounting depth comm: 760 channels 118 – 136.975 MHz nav: 200 channels 108 – 117.95 MHz preselect channel storage capacity - 100 +/- 0.003%, -20°C to 50°C 8 watts min. 85% minimum with limiting at 90% adjustable to 40 mw into 500 ohms 1.5 uV (soft) for 6 dB s+n/n or 1/2 flag nav

EDMO DISTRIBUTORS

com/nav selectivity:

squelch: audio output: demod output: approvals:

6 dB @ +/-7.5 kHz; 50 dB @ +/- 17.5 kHz; 60 dB @ +/-25 kHz 6 dB @ +/-15 kHz; 50 dB @ +/-35 kHz; 60 dB @ +/-50 kHz noise adaptive squelch with manual override 5 watts into a 4 ohm speaker; 40 mw into 500 ohm headphones VOR adjustable from 0.25 to 0.75 arms C34e, C36e, C37d, C38d, C40c

EDMO#

MFR#

MX-385B MX-385T

MX385 MX385

FACEPLATE COLOR black tan

MX300 NAV/COMM RADIO The MX 300 NAV/COMM replaces the RT328T and similar units. For the majority of installations, this unit directly replaces the RT308C, RT328T, RT528E, RT508D, and RT508A.

weight: dimensions: frequency range:

6 lb 6.312 × 3.12 × 12.15 in mounting depth with connector comm: 760 channels 118 – 136.975 MHz nav: 200 channels 108 – 117.95 MHz preselect channel storage capability - 100 frequency stability: +/-0.033%, -20°C to 50°C transmitter power: 8 watts min modulation: 85% minimum with limiting at 90% sidetone: adjustable to 40 mw into 500 ohms receiver sensitivity: 1.5 uV (soft) for 6 dB s+n or 1/2 flag Nav com/nav selectivity: 6 dB @ +/-7.5 kHz; 50 dB @ +/- 17.5 kHz; 60 dB @ +/-25 kHz 6 dB @ +/-715 kHz; 50 dB @ dB @ +/- 35 kHz; 60 dB @ +/-50 kHz squelch: noise adaptive squelch with manual override audio output: 5 watts into a 4 ohm speaker; 40 mw into 500 ohm headphones demod output: VOR adjustable from 0.25 to 0.75 arms approvals: TSO C34e, C36e, C37e, C38c, and C40b

EDMO#

MFR#

MX-300B MX-300T

MX300 MX300

9

EDMO#

13.8 to 26.4 volts transmitting: 6A receiving: 6A standby: 260mA -22º F to +140º F +/- 5 ppm output power: 9W (carrier) typical, 36W (pep) modulation: last stage modulation modulation limiting: 70 to 100% audio harmonics distortion: less than 15% (at 85% modulation) hum and noise ratio: more than 40dB spurious emissions: -16 dBm or less antenna impedance: 50 Ohms receive system: double conversion superheterodyne intermediate frequency: 1st: 38.85MHz (upper) 2nd: 450kHz (lower) sensitivity (at 6dB S/N): less than 1uV squelch sensitivity: 0.5uV (threshold) selectivity: 25kHz ch.spacing: more than ±8kHz (at 6dB): less than ±25kHz (at 60dB) *8.33kHz ch.spacing: more than ±2.778kHz (at 6dB): less than ±7.37kHz (at 60dB) spurious response rejection: more than 60dB audio output power: more than 15W (at 4 ohms) side tone: more than 100mW (at 600 ohms) hum and noise: more than 25dB audio output impedance: ext. speaker 4 ohms (4 to 8 ohms) Side tone 600 ohms

FACEPLATE COLOR black tan

MX-170C NAV/COMM RADIO

EDMO# MX-170C MFR# MX170C The MX 170C Nav/Comm Radio is electrically and mechanically interchangeable with the KX170/175 series of NAV-COMMs. The channeling outputs are for 40-channel glide slope (King Glide Slope) and 200 channels (King Slip Code). The early model KX 170 has 2 out of 5

1.800.235.3300 | edmo.com

201

Airband Communications Satcom

channeling and some interchangeability problems may result.

weight: dimensions: frequency range: frequency stability: modulation: sidetone: receiver sensitivity: comm/nav selectivity:

squelch: audio output: demod output: approvals:

5 lb 3.312 × 2.6 × 14 in mounting depth Comm: 760 channels 118.000 to 136.975 MHz Nav: 200 channels 108.00 to 117.95 MHz Preselect channel storage capacity – 100 +/- 0.003%, -20°C to 50°C 85% minimum with limiting at 90% adjustable to 40 mw into 500 ohms 1.5 uV (soft) for 6 db s+n/n or 1/2 flag Nav 6 dB @ +/-7.5 kHz; 50 dB @ +/-17.5 kHz; 60 dB @ +/-25 kHz 6 dB @ +/-15 kHz; 50 dB @ +/-35 kHz; 60 dB @ +/50 kHz noise adaptive squelch with manual override 5 watts into a 4 ohm speaker; 40 MW into 500 ohm headphones VOR adjustable from 0.25 to 0.75 arms TSO C34e, C36e, C37d, C38d, C40c

existing installations. The original remote power supply in not required with this unit, so a jumper plug is provided for interconnection with the speaker, mic, and power. –– LED display

weight: dimensions: frequency range: frequency stability: transmitter power: sidetone: receiver sensitivity: comm selectivity: nav selectivity: squelch: audio output: demod output: approvals:

5 lb 6.312 × 2.90 × 12 in mounting depth Comm: 760 channels 118.000 to 136.975 MHz Nav: 200 channels 108.00 to 117.95 MHz Preselect channel storage capacity – 100 +/-0.003%, -20°C to 50°C 8 watts min. adjustable to 40 mw into 500 ohms 1.5 uV (soft) for 6 dB s+n/n or 1/2 flag Nav 6 dB @ +/-7.5 kHz; 50 dB @ +/-17.5 kHz; 60 dB @ +/-25 kHz 6 dB @ +/-15 kHz; 50 dB @ +/-35 kHz; 60 dB @ +/-50 kHz noise adaptive squelch with manual override 5 watts into a 4 ohm speaker; 40 mw into 500 ohm headphones VOR adjustable from 1.0 to 3.0 arms TSO C34e, C36e, C37d, C38d, C40C

9

MX-11 COMM RADIO/NARCO REPLACEMENT EDMO# MX-11R MFR# MX11 The MX 11 COMM is a slide-in replacement for the NARCO COM 11, COM 11B, COM 111, COM 111B, AND COM 120. The unit replaces the COM 10 and COM 110 when the NAV 10 and NAV 110 are not used in the system.

SATCOM SKYNODE® S100

weight: dimensions: frequency range: frequency stability: modulation: sidetone: receiver sensitivity: comm selectivity: squelch: audio output: approvals:

3 lb 6.312 × 1.6 × 11.1 in mounting depth 118 – 136.975 in 25 kHz increments +/-0.003%, -20°C to 50°C 85% minimum with limiting at 90% adjustable to 40 mw into 500 ohms 1.5 uV (soft) for 6 dB s+n/n 6 dB @ +/-7.5 KHz; 50 dB @ +/-17.5 KHz; 60 dB @ +/-25 KHz noise adaptive squelch with manual override 5 watts into a 4 ohm speaker; 40 mw into 500 ohm headphones TSO C37d, C38d

MX-12 NAV/COMM RADIO

EDMO# MX-12 MFR# MX12 The MX12 is a 760-channel communication transceiver for use in aviation services and a 200-channel navigation receiver that provides VOR/LOC signals to navigational converters and frequency selection for remote-mounted glide slope receivers. The MX12 is a direct replacement for the NARCO MK12A and is dimensionally identical to the NARCO units—making the MX12 compatible with existing MK12A footprints. This unit is also electrically interchangeable with the NARCO unit and provides the proper audio, navigation signal, and glide slope channeling signals for

202

1.800.235.3300 | edmo.com

LATITUDE TECHNOLOGIES CORP The SkyNode® S100 is a complete tracking and data telemetry device in a small, lightweight package. The SkyNode S100 provides twoway data access anywhere via the global Iridium satellite network and is capable of interfacing with multiple mapping and information management systems. –– Provides reliable 2-way data networking/messaging –– Remotely configurable –– Data logging and even triggers from external switches/buttons –– Internal fast-fix 20-channel WAAS GPS receiver –– Auxiliary GPS serial data output for moving map, electronic flight bag and 406 ELTs –– OOOI flight schedule reporting –– Internal G-switch for automatic anomaly reporting –– Flight data logging –– Meets forestry AFF live tracking requirements –– Auxiliary backup battery option –– Latitude IONode FDM compatible

weight: dimensions: power input:

0.94 lb 6.8 × 4 × 1.1 in 9-36 VDC

EDMO DISTRIBUTORS

Airband Communications Satcom

current:

0.16 A nominal, @ 28 VDC, 0.50 A max during transmit inputs/outputs: 2 serial data ports 7 discrete inputs 3 analog inputs 1 discrete output antennas: individual GPS and Iridium antennas or dual element GPS/Iridium antenna operating temp. range: -40 to +60°C altitude: 50,000 ft environmental qualifiDO-160E Env. Cat.A4-BAB[(SM)(U2F)]XXXXXXZBcations: BXXXBXXXXX approvals: FAA, TCCA, EASA STCs are available for over 900 different helicopters and fixed-wing aircraft

EDMO# S100

MFR# S100-001

DESCRIPTION Skynode S100 AFF Tracker—for complete kit, purchase KT006, MD006, and KT025

ACCESSORIES MD006 KT025 KT006

MD006 KT025 L275-10002

Dual GPS Iridium antenna, white finish install kit with TNC connector for MD006 install kit for S100/straight RF connectors, DB 25 connector backshell & crimp pins

weight: dimensions: power input: current: interfaces:

RF interfaces: programming & network:

operating temperature range: altitude: environmental qualifications: approvals:

EDMO#

MFR# S200-001

LATITUDE TECHNOLOGIES CORP

S200-011

S200-011

Building on the technology of the S100, the SkyNode® S200 provides phone access in conjunction with messaging and data capabilities via the global Iridium satellite network. The S200 exceeds automated flight following (AFF) requirements mandated by US and Canadian Forestry Agencies and interfaces with multiple mapping and data management systems. The S200 supports narrow band networking for aircraft requirS200-021 ing text messaging, email, file transmission and internet access so that users can network from any location. –– Auxiliary GPS serial data output for moving map, electronic flight bag and 406 ELTs –– 0001 flight schedule reporting –– Internal G-switch for automatic anomaly reporting –– Complete voice satellite communications in a single enclosure –– Meets forestry live tracking requirements (AFF) –– Reliable 2-way data networking/messaging –– Remote polling and configuration –– Data logging and event triggers from external switches/buttons and system bus sources –– Internal fast-fix 20 channel WAAS GPS receiver –– Multiple voice communication interface options (see part table for more information) –– Versatile mounting configurations –– Light data logging

S200-021

S200-021

SKYNODE® S200

EDMO DISTRIBUTORS

DESCRIPTION SkyNode S200 Iridium satellite telephone with built-in GPS* SkyNode S200 Iridium satellite telephone with ICS audio interface and built-in GPS* Skynode S200 Iridium satellite telephone with 2-wire POTS interface and built-in GPS*

9

S200-001

3.08 lb 11.5 × 3.81 × 2.75 in 12-34 VDC 0.5 A nominal, @ 28 VDC 0.8 max A during transmit mic input: (-01x models): 150 Ohm audio: 100mW into 8 or 600 Ohm nominal serial data ports for laptop/messaging terminal ARINC-429 receive bus interface (xx2 models) RS-485 serial data bus interface (xx2 models) 2-wire POTS phone interface (x2x models) auxiliary GPS data output individual GPS and Iridium antennas or dual element GPS/Iridium antenna Iridium Direct internet 2×, dial-up, FTP, UDP, TCP/IP Iridium SBD, SMS messaging, email, and FAX Custom event-based actions -45° to 70°C 50,000 ft DO-160E Env. Cat. B2-BAB[(SM)(U2F)] XXXXXXZBBXXXBXXXXX FAA, TCCA and EASA STCs are available for over 900 different helicopters and fixed-wing aircraft

ACCESSORIES DT100-100 MD006 CN060 KT025 ARJ45E ARJ45W ASJ01

DT100-100 S5GIR15161RR-A2PXTT-1 CN060 KT025 ARJ45E ARJ45W ASJ01

telephone handset dual GPS Iridium antenna/white/TNC jacks/ active GPS LNA 20db S200 metal connector install kit install kit with TNC connector for MD006 RJ45 CAT 5 E phone jack for DT100 RJ45 jack with 6 pigtail for DT100 shim for ARJ45

For complete S200 kit, purchase CN060, MD006, KT025 with S200-0XX.

1.800.235.3300 | edmo.com

203

Airband Communications Airband Handhelds

AIRBAND HANDHELDS IC-A24 NAV/COM HANDHELD TRANSCEIVER

9

ICOM AMERICA INC The IC-A24 is an easy-to-use handheld with a user-friendly, backlit keypad and a large, backlit display that shows both letters and numbers making for easy frequency recognition. The display and keypad’s backlighting remain lit until manually turned off. The “flip-flop” channel recall function stores the last 10 channels used; these can be recalled using the “flip-flop” recall buttons on the front panel for faster switching between multiple channels. An external DC power jack allows for battery charging when using the BC-167 wall charger or the CP-20 cigarette lighter cable. When a battery pack is installed, simultaneous charging during operation is possible. –– Flip-flop channel recall stores the last 10 channels used to make it easier to switch between the most commonly used channels –– Backlit display and keypad –– 200 memory channels (20 ch × 10 banks) with 6-character names –– Dedicated 121.5MHz emergency key –– Side tone function allows you to hear your own voice via an external aviation headset –– Optional Ni-Cd and Li-Ion battery packs –– NOAA marine weather channels –– Tag scanning and memory bank scanning –– ANL (Auto Noise Limiter) for noise reduction –– Low battery alert –– Included accessories: battery pack, BP-210N or battery case BP-208N; belt clip, MB-103; carrying case, LC-159; wall charger, BC-110AR/DR; headset adapter, OPC-499; antenna, FA-B02AR; handstrap

weight: dimensions: frequency range: frequency stability: mode: channel spacing: no. of memory channels: power supply requirements: current drain (at 7.2 VDC): operating temperature range: antenna connector:

15.2 oz (with antenna and BP-210N) 2-1/8 × 5-3/32 × 1-13/32 in Tx: 118.000 - 136.975 MHz Rx: 108.000 - 136.975 MHz Weather: 161.650 - 163.275 MHz ±5 ppm WX: AM (6K00A3E); FM (16K0G3E) 25 kHz 200 (20 channels × 10 banks) 7.4/7.2 V DC (battery pack) 11.0 V DC (external DC jack) Tx: 1.5 A typical Rx Max. audio: 300 mA typical Rx Stand-by: 70 mA typical -10°C - 60°C (-14°F - 140°F) 50 Ω BNC type

IC-A14 VHF AIRBAND HANDHELD RADIO ICOM AMERICA INC Tough, compact, and easy to use, Icom’s IC-A14 VHF airband transceiver makes quick communication easy with a streamlined design, easy to operate controls, and the ability to name and organize up to 200 channels. The full keypad design allows users to enter channel or frequency directly with an exclusive button for the 121.5 MHz emergency channel. Sound comes through crisp and clear with the BTL amplifier and auto noise limiter while the large capacity Lithium-ion battery pack keeps it up and running. Just in case, a secondary battery case with AA batteries provides backup power when needed. –– Sound stays crisp, clear, and loud with the BTL amplifier that doubles the audio output while an auto noise limiter (ANL) keeps excess noise to a minimum –– Directly input channel or frequency information with the full keypad that has an exclusive button for the 121.5 MHz emergency channel; receives NAV and WX channels –– Durably constructed with a light, compact, and water resistant design (equivalent to IPX4) –– Provides reliable power output for up to 18 hours with the 2000 mAh large capacity Lithium-ion battery pack; for battery backup, use the battery case which takes 6 AA alkaline cells –– Low batteries are indicated by the low battery indicator light and beep alert –– Users can easily name up to 200 channels with an 8-character name for easy recognition; all channels can then be grouped into ten-memory banks –– Charge up the radio with the BC-179 battery charger that securely holds the radio, even in bumpy conditions –– See the screen in low-light conditions with the LCD backlight –– The IC-A14 and IC-A14S come with: battery (BP232H), charger (BC179), AC adapter (BC147SA), belt clip (MB94), antenna (FAB02AR), handstrap, and owner’s manual.

weight: dimensions: frequency range:

12.3 oz 2-3/32 × 4-29/32 × 1-7/16 in Tx: (COM) 118.000–136.975MHz Rx: (COM, NAV) 108.000–136.975MHz Weather: 161.650–163.275MHz frequency stability: ±5 ppm mode: weather FM (16K0G3E); AM (6K00A3E) channel spacing: 25 kHz number of memory channels: 200 channels with 10 banks power supply requirement: 7.4 VDC (Icom battery pack) current drain (at 7.2 VDC): Tx 1.5A Rx Max. audio 500mA Stand-by 50mA typical operating temperature range: –10°C to +60°C ; +14°F to +140°F

EDMO#

MFR#

VOLTAGE

BATTERY TYPE

FULL KEYPAD / 200 CHANNELS EDMO# IC-A24 01 IC-A24 220

204

MFR# A24 01 A24 01 220

VOLTAGE 110 V 220 V

1.800.235.3300 | edmo.com

IC-A14 21 ICA1421220 IC-A14ALK

A14 21 IC-A14 21/220 IC-A14ALK

110 V 220 V 110 V

lithium ion lithium ion alkaline

110 V

lithium ion

SIMPLE KEYPAD / 100 CHANNELS IC-A14S 01

A14S 01

EDMO DISTRIBUTORS

The Name Pilots Know and Trust A220

TSO Version Available



Automatic Squelch Control



Bright White OLED Display and Backlit Keys



New D-Sub 25-pin Connector on Back Panel



Easy Channel Selection



Easy Installation

A220: Engineered for the Serious Pilot

Built upon history and innovation, Icom’s A220 is TSO approved. Along with Icom’s feature set this panel mount radio was built for the serious pilot.

A24: VHF NavCom Handheld A6: Com Only Handheld • Large screen • Side tone function • Easy channel selection with “FliP-Flop+” and dual watch • 200 Memory channels • VOR available on A24 only

FOLLOW US TODAY: For a complete line visit: www.icomamerica.com/avionics ©2016 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. All other trademarks remain the property of their owners. 42218a

Contact Edmo Today!

A14: VHF Handheld • 700mW loud audio • Compact, light weight and rugged • Large capacity Li-Ion battery pack • 200 channels with memory banks

Airband Communications Airband Handhelds

IC-A6 HANDHELD RADIO

EDMO#

ICOM AMERICA INC

BP-232H

DESCRIPTION

TRANSCEIVER MODELS

BP-232H Lithium battery: 7.2 V / 2300 mAh

IC-A14, IC-A14S

BATTERY CASES BP-208N

BP208N

BP-261

BP-261

EDMO#

alkaline battery case accepts AA (LR6) × 6 cells

MFR#

DESCRIPTION

IC-A24, IC-A24E, IC-A6, IC-A6E IC-A14, IC-A14S

TRANSCEIVER MODELS

CHARGERS BC-119N 01

BC119N 01

BC-119N 02

BC119N 02

BC-121N

BC-121N

BC-144N 51

BC114N 51

BC-144N 52

BC144N 51

BC-179 01

BC179 01

BC-179 02

BC179 02

BC-167SA

BC-167SA

110 V desktop rapid charger 220 V desktop rapid charger 6-slot multi desktop charger 110 V drop-in desktop charger 220 V drop-in desktop charger 110 V drop-in desktop charger 220 V drop-in desktop charger 117 V wall charger

BC-167SD

BC167SD

220 V wall charger

IC-A24, IC-A24E, IC-A6, IC-A6E, IC-A14, IC-A14S IC-A24, IC-A24E, IC-A6, IC-A6E, IC-A14, IC-A14S IC-A24, IC-A24E, IC-A6, IC-A6E, IC-A14, IC-A14S IC-A24, IC-A24E, IC-A6, IC-A6E IC-A24, IC-A24E, IC-A6, IC-A6E IC-A14, IC-A14S (use with BC-174A) IC-A14, IC-A14S IC-A24, IC-A24E, IC-A6, IC-A6E IC-A24, IC-A24E, IC-A6, IC-A6E

9

The IC-A6 is a straightforward, water-resistant comm handheld that is designed for one-handed use. It has a well-labeled, large keyboard and a large, clear, backlit display that remains lit until the user manually turns it off - which is useful in dark conditions. The IC-A6 also has a “flip-flop” channel recall function that stores the last 10 channels used; these can be recalled using the “flip-flop” recall buttons on the front panel for faster switching between multiple channels. An external DC power jack allows charging via a wall charger or a cigarette lighter cable. 110V version. –– Provides 200 memory channels (20 Ch × 10 banks) with 6 character names –– Dedicated 121.5MHz emergency key –– Side tone function allows you to hear your own voice via an external aviation headset –– Optional Ni-Cd and Li-Ion battery packs –– NOAA marine weather channels –– Tag scanning and memory bank scanning –– ANL (Auto Noise Limiter) for noise reduction –– Low battery alert –– Includes: belt clip (MB-103), wall charger (BC-110AR), antenna (FAB02AR), 1650 mAh NiMH Battery pack (BP-210N), headset adapter (OPC-499)

MFR#

weight: dimensions: frequency range: frequency stability: mode: channel spacing: number of memory channels: power supply requirement: current drain (at 7.2 VDC): operating temperature range: antenna connector:

EDMO#

15.2 oz (with antenna and BP-210N) 2-1/8 × 5-3/32 × 1-13/32 in Tx: 118–136.975 MHz Rx: 118–136.975 MHz Weather: 161.65–163.275 MHz ±5 ppm WX: AM (6K00A3E) FM (16K0G3E) 25 kHz 200 (20 channels × 10 banks) 7.4 / 7.2 V DC 11.0 V DC (external DC jack) Tx: 1.5 A typical Rx max. audio: 300 mA typical Rx stand-by: 70 mA typical -10°C to +60°C; -14°F to +140°F 50Ω BNC type

MFR#

IC-A6 30 IC-A630220

VOLTAGE

206

HM-152 HM-161 HM-173 HM-176

HM152 HM161 HM173 HM176

EDMO#

hand mic hand mic hand mic hand mic

MFR#

BC157S 09

220 V AC adapter

BC-157S

BC157S 12

110 V AC adapter

OPC-499

PA OPC499

headset adapter cable headset adapter cable adapter

AD101

LC159

carrying case for IC-A24/IC-A6

AD-94 11

AD94 11

CP-12L

CP-12L

CP-17L

CP17L

CP-20

CP20

CP-22

IC-CP-22

TRANSCEIVER MODELS

BP210N

NiMH battery: 7.2 V / 1650 mAh

DESCRIPTION

BC-157S 09

AD-101

DESCRIPTION

A110 and F-series A110 IC-A14, IC-A24, IC-A6 PS-80, IC-A200

BC-147SE15 BC-147SE 15 220 V AC adapter

PA OPC967

MFR#

TRANSCEIVER MODELS

TRANSCEIVER MODELS

ADAPTERS

PAOPC-967

BATTERY PACKS BP-210N

DESCRIPTION

110 V 220 V

OPTIONS FOR ICOM HANDHELD TRANSCEIVERS EDMO#

MFR#

IC-A6 30 IC-A6 30 220V

ACCESSORIES LC-159

EDMO#

HAND MICS

adapter cup for BC-119N/BC-121 cigarette cord w/ noise filter cigarette lighter cable cigarette lighter cable cigarette lighter cable

IC-A14, IC-A14S (use with BC-171) IC-A14, IC-A14S (use with BC-121N) IC-A14, IC-A14S (use with BC-121N) IC-A24, IC-A24E, IC-A6, IC-A6E, IC-A14, IC-A14S IC-A23, IC-A5 IC-A24, IC-A24E, IC-A6, IC-A6E (use with BC-119N) IC-A24, IC-A6 with BP-209 or BP210 battery IC-A4, IC-A4, IC-A5, IC-A23 IC-A22, IC-A3 IC-A6, IC-A24 IC-A14

IC-A24, IC-A24E, IC-A6, IC-A6E

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Airband Communications Scanners

EDMO#

MFR#

DESCRIPTION

TRANSCEIVER MODELS

BELT CLIPS AND CARRYING CASES MB-86 MB-103 MB-96N

MB-86 MB103 MB96N

swivel belt clip belt clip leather belt hanger

IC-A24, IC-A24E, IC-A6, IC-A6E IC-A24, IC-A24E, IC-A6, IC-A6E IC-A24, IC-A24E, IC-A6, IC-A6E

carrying case

IC-A24, IC-A6

CARRYING CASE LC-159

EDMO#

LC159

MFR#

DESCRIPTION

FAB02AR

IC-ANT-SB

ANT SB

TRANSCEIVER MODELS

8-inch replacement IC-A24, IC-A6, IC-A14, ICantenna A14S antenna switchbox for connection to external aircraft antennas

CLONING CABLE/USB PLUG & SOFTWARE FOR ICOM RADIOS EDMO# OPC-478U MFR# OPC478UC Provides quick and easy programming for memory channels, memory names and set mode contents using a compatible PC. Compatible ICOM parts listed in the table below.

IC-A6 IC-E208 IC-E90 IC-F10 IC-F11 IC-F12 IC-F14 IC-F1020 IC-F20 IC-F21 IC-F22 IC-F24 IC-F3GT/GS

IC-F33 IC-F43 IC-F4GT/GS IC-P7A IC-R10 IC-R2 IC-R3 IC-R5 IC-T2A IC-T2H IC-T3H IC-T7A IC-T7H

IC-T8A IC-T81A IC-T8E IC-T90A IC-T91A IC-T91AD IC-V8000 IC-V8 IC-V8A IC-U82 IC-V82 IC-W32A IC-W32E

EDMO# TSC-100RA MFR# TSC-100RA The TSC-100RA is a narrow band receiver that operates on airband, VHF and VHF low band (66-68 MHz), and WFM broadcast band frequencies. This receiver provides high sensitivity and outstanding audio with a large, backlit LCD screen and easy-to-read backlit buttons. –– 200 memory channels, 10 memory banks –– Provides band selection and multiple frequency steps –– Dual watch and scan and search functions –– Squelch level adjustment –– AM and FM reception –– Equipped with automatic power save and beep tone –– Backlit LCD screen, external earphone jack and keypad lock –– This unit includes 3 AA batteries, antenna, belt clip, male SMA-to-female BNC connector, and an operation manual

weight: dimensions: memory channels: power supply: frequency range: PLL steps: operating temperature range:

4.2 oz (with battery) 2.2 × 3.9 × 1.18 in (without antenna) 200 3.7 VDC 66-88 , 88-108 MHz, 109-136 MHz, 136-174 MHz 5 / 6.5 / 8.33 / 10 / 12.5 / 25 / 50 / 100 / 500 kHz -10°C to +60°C

9

IC-208H IC-2100H IC-2200H IC-2720H IC-2725E IC-2800H IC-3FGX IC-40S IC-A110 IC-A23 IC-A24 IC-A4 IC-A5

TSC-100RA AIRBAND SCANNER WITH NOAA WEATHER CHANNELS TTI

ANTENNAS AND ACCESSORIES FA-B02AR

SCANNERS

PILOT USA PUSH-TO-TALK SWITCH Push-to-talk switch that allows the user to transmit to ATC when the red button is engaged. Can be used with or without an intercom. Compatible with multiple Icom handhelds. EDMO# PTT-SW

MFR# PTT-SW

PA-50 PA-50PTT PA-50ICPTT PA-50IC/ PTT

COMPATIBLE TRANSCEIVER MODELS IC-A3, IC-A6, IC-A22, IC-A24; must be used in conjunction with part #PA-OPC 499 headset adapter base model for Icom headset adapters, may be used with OPC499, OPC-871, OPC-967

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

207

Transponders, Altitude Encoders & Serializers

Transponders..................................................................................................... 210 Altitude Encoders.............................................................................................. 212

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

209

Transponders, Altitude Encoders & Serializers Transponders

ADS-B SOLUTIONS TRANSPONDERS TT21, TT22 AND TT31 MODE S TRANSPONDERS TRIG AVIONICS LIMITED All aircraft flying in US-controlled airspace must have certified ADS-B out capability by 2020. To meet this need, Trig offers the easiest retrofit and forward fit ADS-B technology. Their TT22 and TT31 ADS-B transponders and their TN70 WAAS GPS kit give leading edge performance, features and value. The compact, power-efficient TT22 and TT31 transponders are FAA TSO/EASA approved for IFR and VFR. Both models provide Mode S 1090ES and ADS-B Out capability when paired with a suitable WAAS GPS (FAA requirement for certified aircraft). Trig has a comprehensive FAA STC program, covering hundreds of aircraft types. Free ADS-B STCs are available for both TT31 and TT22 transponders. These units are compatible with Garmin GTN and GNS WAAS Navigators. Customers can also use the Trig TN70 GPS WAAS kit, NexNav Mini or FreeFlight 1201 for a 2020 compliant solution.

10

TT22 MODE S TRANSPONDER The TT22 is a small, light, two-part transponder system. The control head has an integrated altitude encoder, which saves additional space and weight. Fitting in the tightest of panel space, the separate hardware box can be installed anywhere in the airframe. With a 250 watt power output, the TT22 can be used in any light sport and GA aircraft—even high performance types operating above 15,000 feet at speeds greater than 175 knots. –– FAA TSO C166b Class 1 device—2020 mandate ready. Free FAA ADS-B STC covers 576 aircraft types –– Compatible GPS units: Garmin GTN/GNS WAAS navigators, Trig TN70 kit, FreeFlight 1201 and NexNav Mini

TT21 MODE S TRANSPONDER The TT21 is a two-part low power transponder system, with a compact control head that includes an integrated altitude encoder. This transponder’s low power qualifies the unit as a Class 2 transponder. Class 2 transponders may be used on aircraft cruising slower than 175 knots, and operating below 15,000 feet, IFR or VFR. –– Certified class 2 transponder 130 watts nominal output –– Control head fits in a standard 57 mm round instrument hole or smaller compact mount –– Integrated altitude encoder –– EASA ETSO and FAA TSO Certification - includes TSO C166b Note the FAA requires Class 1 device for 2020 in controlled airspace.

TT31 MODE S TRANSPONDER The TT31 is the class leading ‘plug and play’ Mode S retrofit, compatible with Bendix King KT76A, KT76C and KT78A transponders. With the latest software, the TT31 even allows an ADS-B compatible install using the existing BK tray. –– FAA TSO C166b Class 1 device (2020 mandate ready) –– Free FAA ADS-B STC covers 650 aircraft types –– Compatible WAAS GPS units: Garmin GTN/GNS navigators, Trig TN70 kit, FreeFlight 1201 and NexNav Mini

TN70 KIT This lightweight and versatile kit is ideal for certified aircraft requiring a 2020 compliant WAAS GPS and antenna. The TN70 compliments both the TT31 and TT22 with a simple installation, away from the panel. This allows the continued use of an existing non WAAS navigator (if fitted). –– ADS-B 1090ES Out International Standard, FAA STC approved

ADS-B OUT CONSIDERATIONS OPTION 1: TT31 MODE S TRANSPONDER WITH PREEXISTING GARMIN GTN OR GNS NAVIGATOR The TT31 is FAA STC approved for use with Garmin’s GTN and GNS series WAAS GPS devices when installed with the latest free TT31 ADS-B STC software (version 3.13 required). This approval, coupled with the TT31’s compatibility with existing Bendix King KT76A, KT76C, and KT78A transponder trays makes it a fast, cost-effective retrofit option. OPTION 2: TT31 OR TT22 WITH THE TRIG TN70 KIT For certified aircraft without a compliant WAAS GPS, Trig provides the TN70 kit. This consists of a certified WAAS GPS receiver and companion WAAS GPS antenna. The TN70 kit is ideal a companion to either Trig’s TT31 or TT22 Mode S transponders (see table below for comparison) for full ADS-B Out compliance. –– The FAA STC’s (ADS-B) for the TT31 and TT22 includes pairing with the TN70 kit

TT22 weight: dimensions: operating temperature: supply voltage: certification: compliance:

210

1.800.235.3300 | edmo.com

0.8 lb controller: 1.8 × 2.4 × 2.1 in transponder: 0.8 × 2.6 × 6.2 in controller –25°C to +70°C transponder: –40°C to +70°C 9-33 V ETSO C88A, C112C, C166A and TSO C88b, C112c, C166b, approved for IFR and VFR flight, FAA STC pending ED-73C, DO-160F, DO-178B Level B, DO-254 Level C, DO-260B, DO-181D

EDMO DISTRIBUTORS

Transponders, Altitude Encoders & Serializers Transponders

STX-165 & STX-165R TT31 weight: dimensions: operating temperature: supply voltage: certification: compliance:

2.8 lb 1.57 × 6.3 × 9.4 in –25°C to +70°C 10-33 V ETSO C166A, 2C112B and TSO C112, C166b, FAA STC ED-73B, DO-160E, DO-178B Level B, DO181C, DO-260B Class B1S, DO-254 Level C

TN70 KIT weight: dimensions: operating temperature: supply voltage: certification: compliance:

1.06 lb (antenna is 0.62 lb) box: 1.6 × 4.13 × 6.5 in antenna: 0.73 × 3 × 4.7 in –55°C to +70°C 9-32 V ADS-B 1090ES Out - international standard FAA STC for popular aircraft types worldwide Trig support

–– Provides 200 watts nominal output –– Kit includes: transponder, 9 pin sub D connector, size 1 D connector clamp, 15 pin sub D connector, size 2 D connector clamp, SMA connector

STX-165

STX-165 ONLY –– 3ATI panel cutout with a bright OLED display that automatically dims in low light— ideal for nighttime operations –– Three timer functions, elapsed flight time, up timer, and down timer –– Behind-the-panel depth of only 7.34” –– Requires low currents—making it perfect for LSA, glider, and UAV operations For added DALT, current outside air temperature and icing alert functions, add an OAT probe (part #305561-91).

STX-165R EDMO#

MFR#

DESCRIPTION

TT31 00220-00 00225-00

00220-00 00225-00

weight:

00223-00 00231-00

TT31 install kit TT31 mounting tray

input voltage: current requirements:

00710-00 00745-00 00772-00 00649-00

TT21 mode S transponder complete kit TT22 mode S transponder remote unit only TT22 mode S transponder complete kit TC20 controller for TT21/TT22

TT31 ACCESSORIES 00223-00 00231-00

dimensions:

TT21/22 00710-00 00745-00 00772-00 00649-00

TT21/22 ACCESSORIES 00667-00

00667-00

TT21/TT22 mounting tray

01381-00

TN70 WAAS GPS Receiver / WAAS Antenna

TN70 KIT 01381-00

ADS-B SYSTEM AIRSPEED SWITCH KIT 1111148201 PA-111114-820-1 ADS-B system airspeed switch kit compatible with: Trig TT31, TT22 and Bendix King KT 74 installations

power output: transmitter frequency: receiver sensitivity: inputs:

environmental: certifications:

1.3 lb (STX-165) 1.16 lb (STX-165R) 1.78 × 3.5 × 7.34 in (behind-the-panel depth STX-165) 3 × 1.8 × 6.9 in (STX-165R) 11-33 Vdc 430 mA @ 14 Vdc 210 mA @ 28 Vdc (500PRF and 7777Code) (STX-165) 360 mA @ 14 Vdc 180 mA @ 28 Vdc (500PRF and 7777Code) (STX-165R) 200 watts nominal 1090 kHz -74 dBm nominal @90% reply rate Alt encoder: built-in 35K encoder, external RS-232 (optional) OAT probe: SANDIA STP78 (optional) (STX-165) Grey Code, RS-232 (STX-165R) temperature: -20° to +55°C altitude: -100 to 35,000 ft (STX-165R) DO160F, DO 178B Level C, TSO C74d TSO D88b (encoder)

10

TT31 transponder only TT31 transponder Kit (includes Trig tray and install kit)

STX-165 PANEL MOUNT TRANSPONDER SANDIA AEROSPACE The STX-165 and STX-165R Mode C transponders are TSO certified and provide 200 watts nominal output. The STX-165 panel mount version has a 1/2 3ATI panel cutout configuration and a bright OLED display and is equipped with a built-in altitude encoder and three tier functions: elapsed flight time, up timer, and down timer. If the user installs an optional STP 78 OAT probe (305561-91), the unit can also display density altitude (DALT), current outside air temperature in Celsius or Fahrenheit, and an icing alert. The STX-165R remote version accepts either Gilham Gray Code or RS-232 altitude input for Mode C operation. It can be mounted vertically or horizontally with or without a mounting tray.

EDMO DISTRIBUTORS

EDMO# 705832-00 705831-00

MFR#

DESCRIPTION

705832-00 705831-00

panel mount transponder remote mount transponder

305561-91

OAT probe for STX-165

ACCESSORIES 305561-91

1.800.235.3300 | edmo.com

211

Transponders, Altitude Encoders & Serializers Altitude Encoders

ALTITUDE ENCODERS NANO ENCODERS

EDMO# SSD120-30N 30N-MOD1

MFR# SSD120-30N SSD120-30N-MOD1

10

TRANS-CAL INDUSTRIES INC The SSD120-(XX) Series Nano altitude encoders are all solid-state devices that measure air pressure and convert the measurements into the ICAO parallel data for pressure altitude transmission via an ICAO pressure altitude Gray code output. The Nanos also provide altitude data to GPS, autopi30N-MOD1 lots, transponders, and other navigation devices with optional two (or five) asynchronous RS232 outputs for which the serial data protocol can be individually selected. The user has multiple resolution settings to choose from; typically the serial altitude data is set to 100 ft or 10 ft. However, data protocols for one-foot resolution or metric altitude data are available. The Nanos are available in an array of configurations according to operating altitude, temperature range, and necessary data formats (see table below). –– Dual 1/8-27 NPT static port inlets –– One ICAO pressure altitude Gray code output –– Optional two or five RS 232-compliant data outputs –– Serial ports may be installer configured to transmit separate data protocols (message and baud rate) –– Power, ground, and data I/O lines provided on industry standard D-subminiature connectors –– Constructed with corrosion-resistant aluminum housing

NANO ADAPTER PLATES Trans-Cal Industries’ adapter plates allow aircraft technicians to quickly replace existing or legacy encoder installations with a Trans-Cal SSD120-(XX) N series altitude digitizer/encoder.

weight: altitude range: operating temperature range: operating current:

operating voltage: approvals:

5.9 oz (low altitude) 6.8 oz (high altitude) -1200 up to +100,000 ft -4° to +158°F optional “E” versions -67° to +158°F +12Vdc @ 220mA / +28VDc @ 270mA (low altitude) +12Vdc @ 55mA / +28Vdc @ 60mA (high altitude) +10 to +33 Vdc FAA TSO-C88a EASA ETSO-C88a MIL-STD-704E RTCA DO-160E

SSD12030NE SSD120-30NE SSD120-35N SSD120-42N

SSD120-35N SSD120-42N

DESCRIPTION Altitude range: 30,000 ft Altitude range: 30,000 ft SSD120-(XX)N-series Altitude Digitizers must be factory modified to function with early Narco transponder models AT-5, AT-5A, AT-6, AT-6A, AT-50 and AT-50A. The current SSD120-(XX)N does not allow field modification and must be ordered from the factory as a “mod.1” version device to function with these early Narco transponders. Altitude range: 30,000 ft extended operating temperature range -67° to +158°F (-55° to +70°C) Altitude range: 35,000 ft Altitude range: 42,000 ft

WITH TWO RS232 OUTPUTS 30N-RS232 30NERS232

SSD120-30N-RS232 SSD120-30NE-RS232

30NRS232M1 SSD120-30N-RS232 M1

35N-RS232 42N-RS232 42NE-RS232

SSD120-35N-RS232 SSD120-42N-RS232 SSD120-42NE-RS232

30N-RS232 30NERS232

SSD120-30N-RS232 SSD120-30NE-RS232

30NRS232M1 SSD120-30N-RS232 M1

35N-RS232 42N-RS232 42NE-RS232

SSD120-35N-RS232 SSD120-42N-RS232 SSD120-42NE-RS232

Altitude range: 30,000 ft Altitude range: 30,000 ft extended operating temperature range -67° to +158°F (-55° to +70°C) Altitude range: 30,000 ft SSD120-(XX)N-series Altitude Digitizer must be factory modified to function with early Narco transponder models AT-5, AT-5A, AT-6, AT-6A, AT-50 and AT-50A. The current SSD120-(XX)N does not allow field modification and must be ordered from the factory as a “mod.1” version device to function with these early Narco transponders. Altitude range: 35,000 ft Altitude range: 42,000 ft Altitude range: 42,000 ft extended operating temperature range -67° to +158°F (-55° to +70°C) Altitude range: 30,000 ft Altitude range: 30,000 ft extended operating temperature range -67° to +158°F (-55° to +70°C) Altitude range: 30,000 ft SSD120-(XX)N-series Altitude Digitizer must be factory modified to function with early Narco transponder models AT-5, AT-5A, AT-6, AT-6A, AT-50 and AT-50A. The current SSD120-(XX)N does not allow field modification and must be ordered from the factory as a “mod.1” version device to function with these early Narco transponders. Altitude range: 35,000 ft Altitude range: 42,000 ft Altitude range: 42,000 ft extended operating temperature range -67° to +158°F (-55° to +70°C)

WITH TWO RS232 OUTPUTS (HIGH ALTITUDE) 50N-RS232 62NE-RS232

SSD120-50N-RS232 SSD120-62NE-RS232

Altitude range: 50,000 ft Altitude range: 62,000 ft range -67° to +158°F (-55° to +70°C)

ADDITIONAL VERSIONS 30N-RS

SSD120-30N-RS

Altitude range: 30,000 ft with 10 ft resolution provides altitude data on two asynchronous RS232 outputs and one RS485 output

ADAPTER PLATES 103036 103038 103059 103060

212

1.800.235.3300 | edmo.com

103036 103038 103059 103060

compatible with: TCI D120 compatible with: SSD 120 compatible with: ACK devices compatible with: Shadin devices

EDMO DISTRIBUTORS

ADS-100 Altitude Data Simulator

• Simulate RS-232 and ICAO pressure Altitude Data with a single test box • Provides a simple and robust means of simulating serial and parallel altitude data inputs for multiple aircraft systems • Two-line vacuum fluorescent display • Internal 9V battery power providing up to 2 hours of operation

ADS-100

ECP-100

SSD120-30N

ECP-100 Altitude Encoder Calibration Programmer

• Program any Trans-Cal Serial Encoder yourself! • 10' or 100' resolution • Assign serial port protocol and match an encoder to the Flight Altimeter without lugging a PC to aircraft • Trans-Cal encoders are the only Altitude Encoders in the industry that can transmit two different serial data protocols simultaneously

SSD120-30N Altitude Digitizer

• The smallest, lightest and lowest power consumption altitude encoder—the Nano! • Accurate pressure altitude information for multiple aircraft systems • FAA TSO-C88a and EASA ETSO-C88a approved

SSD120-30N-RS232 Altitude Digitizer SSD120-30N-RS232 SSD120-100N-SDR

• Optional 2 or 5 RS-232 compliant data outputs • FAA TSO-C88a and EASA ETSO-C88a approved

SSD120-100N-SDR Serial Data Repeater

• Designed to provide a fan-out of up to ten RS-232 compliant outputs from a single RS-232 input • Provides a simple and robust means of transmitting serial data to multiple aircraft systems in a small package • FAA TSO-C88a and EASA ETSO-C88a approved

Adapter Plates ADAPTER PLATES

• Trans-Cal adapter plates fit many encoders and are TSO-C88a and EASA ETSO-C88a approved. Plates are available for ACK, Ameri-King, Shadin, Sandia, Narco, and legacy Trans-Cal units D120 and SSD120-(XX)A

BEST WARRANTY IN THE BUSINESS: 42 months manufacturer direct replacement

AMONG THE MOST RELIABLE ENCODERS: average MTBF ranges from 8.9 to 15 years

p: 818.787.1221 f: 818.787.8916 www.trans-cal.com

Transponders, Altitude Encoders & Serializers Altitude Encoders

D-120 ALTITUDE ENCODER

SAE 5-35 ALTITUDE ENCODER

TRANS-CAL INDUSTRIES INC

SANDIA AEROSPACE

EDMO# D120-P2T20 MFR# D120-P2-T 20 Renowned for its reliability, the D-120 altitude encoder is an electro-mechanical, optical shaft angle encoder linked to a mechanical aneroid. It provides low current consumption and a high MTBF. –– Offered in 20,000, 30,000, and 35,000 ft operating ranges.

weight: altitude range: operating temperature range: input power: dielectric strength: insulation resistance: approvals:

19 oz 1,000 ft to +35,000 ft 86°F to 122°F (30°C to +50°C) 10-15 VDC at 120 ma. Max (pin 14) 22-30 VDC at 150 ma. Max (pin 8) ground (pin 15) 200 VAC, 60 Hz for 1 min 200 VDC, 10 megohms minimum output TSO-C88

ALTITUDE SERIALIZER

10

TRANS-CAL INDUSTRIES INC

EDMO# IA-RS232CS MFR# IA-RS232CS The IA-RS232C-S altitude serializer is a solid-state interface adapter that converts parallel, 10-bit ICAO pressure altitude data to a fan-out of two RS232 compliant outputs. This device provides a simple and robust method for converting parallel data into serial data and retransmitting to multiple aircraft systems. –– Serial altitude data is provided on two asynchronous RS232C output ports and can be use to provide pressure altitude data to GPS or other on-board navigation devices –– No warm-up required –– Compatible with Trans-Cal, Terra, ACK, Narco

weight: altitude range: operating temperature range: operating voltage: operating current: approvals:

214

12 oz -1,000 to +62,700 ft 68° F to 185°F (-20°C to +85°C) +12 to +30 VDC 90 mA TSO-C88a RTCA DO-160b

1.800.235.3300 | edmo.com

The SAE 5-35 altitude encoder combines three functions into one unit: altitude encoding, digital altitude, and altitude inflight monitoring. The SAE 5-35 provides Gillham Grey code to the aircraft’s mode C transponder using innovative pressure circuitry that greatly reduces warm-up time. Two RS232 altitude data outputs provide digital altitude data to GPS and terrain awareness systems in 10-foot increments. This unit provides altitude data from -1000 to 35,000 feet; as such, it can be installed for use on piston, turbine, or jet aircraft. The altitude inflight monitoring (AIM) system ensures that the aircraft altitude remains within a selected range and provides alerts whenever deviations of 100 feet or more occur.

weight: dimensions: altitude range: power input: operating current: outputs: resolution: accuracy: AIM output: approvals:

EDMO# 705154-00

MFR# 705154-00

0.7 lb 4.74 × 4.87 × 1.06 in 35,000 ft 11 - 33 VDC 0.9 amps one grey code, two RS232 grey code 100 ft, RS232 10 ft 50 ft or better max lamp current: 80 mA max. off voltage: 50 V TSO C88a

DESCRIPTION SAE 5-35 Altitude Encoder 35,000 feet

ACCESSORIES 305216-00 305189 305145

305216-00 305189 305145

install kit for SAE 5-35 knurled nut for SAE 5-35 mounting tray for SAE 5-35

8800 ALTITUDE ENCODER SHADIN Shadin’s 8800 Altitude Encoder/ Converter is a solid-state Mode C Encoder with a high-resolution converter that interfaces with most transponders while simultaneously transmitting altitude information to GPS (and Loran) receivers. The 8800 makes advanced VNAV functions and 3-D global positioning possible by providing auto8800T matic, real-time altitude input to the aircraft’s GPS receiver. This is particularly beneficial in situations in which the GPS unit is only able to receive data from three satellites instead of the required four (the fourth may be below the horizon or the signal is obstructed by the tail or wing of the aircraft) because the 8800 supplies precise, real-time altitude reference data as a substitute for the fourth satellite. –– Provides RS-232 formatted data to selected GPS/Loran systems as well as the Shadin AMS-2000 Altitude Management System –– Compatible with most Mode C transponders—supplies Gray code altitude information

EDMO DISTRIBUTORS

Transponders, Altitude Encoders & Serializers Altitude Encoders

–– –– –– –– ––

Eliminates the need to manually enter altitude reference Allows display of altitude in 10-foot increments One-foot resolution allows true VNAV functions All solid-state microprocessor design for reliability FAA approved: TSO C-88a

weight: dimensions: altitude range: operating temperature: input: power input: approvals:

EDMO# 8800-02 8800M 8800T

MFR# 8800-02 8800M 8800-T

12.8 oz 6.125 × 3 × 2.124 in -1,000 ft to 35,000 ft -20° to +55°C static pressure SSR automatic pressure altitude transmission Codes RS-232 serial data (pressure altitude) TSO-C88a RTCA DO-160B

DESCRIPTION landing up gear warning and altitude encoder IIMorrow GPS interface Trimble and Garmin GPS serial interface

ACCESSORIES IK8800

IK8800

install kits for 8800 altitude encoders

AMS 2000 ALTITUDE ALERT SYSTEM SHADIN

A-30 ALTITUDE ENCODER ACK TECHNOLOGIES INC The model A-30 digitizer works with all modern mode A/C and mode S transponders. This device reports to 30,750 feet and provides parallel gray code output in the mod 4 through mod 7 configuration. In mod 8 and above, the digitizer reports to 42,000 feet and provides both parallel gray code and two RS 232 outputs which are jumper selectable in 10 or 100 foot increments in the most popular data formats. –– High quality construction with gold-plated connectors and an anodized diecast aluminum chassis –– Includes: quick release mounting tray, 4 foot harness, 4 foot static line, installation manual

weight: dimensions: range: accuracy: operating voltage: operating current: operating temp: warm-up current draw: warm-up time: altitude resolution: approvals:

EDMO#

9 oz 1.5 × 3.125 × 5.75 in 10 to 28 VDC 300 mA max 11 pins – 10 signal, 1 return (no diode isolation) RS232 100 feet (10 feet with serial encoder) up to 55,000 ft -1,000 feet of upper limit of encoder 14°F to +122°F (-10° C to +50° C)

EDMO DISTRIBUTORS

MFR#

A-30.5

A-30

A-30.9

A-30

A-30.5

A-30.9

5.1 oz 6 × 2.65 × 1.3 in MOD 5-950 to 30,750 ft/w gray code output MOD 9-950 to 42,000 ft/w 2× RS232 output typical +-50 ft maximum +-50 ft 10 to 32 VDC 160 mA typical -4 to +131°F -20 to +55°C 14 VDC 160 mA 28 VDC 220 mA 70°F ambient 60 seconds 0° F ambient 210 seconds gray code (parallel) output 100 ft RS 232 10 or 100 ft FAA TSO-C88a RTCA DO-160B German LBA 10.221/4

DESCRIPTION Mod 5 gray code 30,000 ft, code output to 30,750 ft includes: quick release mounting tray, 4 ft harness, 4 ft static line, installation manual, 3 year guarantee Mod 9 gray code 42,000 ft, RS 232 dual outputs

ACCESSORIES A-30R

weight: dimensions: power: Gray code inputs: serial outputs: resolution: operating altitude: altitude display range: operating temperature:

TSO-C88a RTCA/DO-160B

10

EDMO# 8900 MFR# 8900 The AMS 2000 Altitude Alert System alerts the pilot when the plane is approaching or deviating from the target altitude and when the plane has reached decision height or minimum descent altitude. Upon nearing the destination altitude, the AMS 2000 also provides a landing gear reminder. In addition, the AMS 2000 calculates density altitude and engine performance. Altitude is displayed in 100-foot increments and when connected to the 8800 altitude encoder, it displays altitude in 10-foot increments. –– Bright LED screen with single dial control for all functions –– Adjustable audio alert tone (Sonalert™ compatible) –– Broadcasts and displays gear-down reminder, altitude deviation, level-off warning –– Displays MDA/decision height –– Displays altitude from -1,000 to +62,000 ft –– Compatible with most Mode-C transponders

approvals:

A-30E 1-04 A30.11.01

A-30R

A-30 install hardware kit includes: one 1/8-in NP port adapter, four 3/8-in spring hose clamps, six 5/16-in spring clamps, one 3/16-in nylon “T” fitting, two reducing adapters, one sheet altimeter placard A30.03 A-30 mounting tray that includes “T” nut and bolt A30.06.04 A-30 black hose ≈ 3 ft A30.11.01 A-30 connector and 4 foot wiring assembly

1.800.235.3300 | edmo.com

215

Headsets, Intercoms & Accessories

Active Headsets................................................................................................ 218 Passive Headsets.............................................................................................. 227 Ground Support Communication Headsets...................................................... 235 Headphones...................................................................................................... 236 Headset Adapters & Interfaces......................................................................... 237 Headset PTT Switches...................................................................................... 243 Handheld Microphones..................................................................................... 244 Microphone Lights............................................................................................. 245 Helicopter Helmets............................................................................................ 246 Switch & Cable Assemblies............................................................................... 248 Intercom Systems............................................................................................. 253

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

217

Headsets, Intercoms & Accessories Active Headsets

ACTIVE HEADSETS BOSE® A20® AVIATION HEADSET

11

BOSE CORPORATION The Bose® A20® Aviation Headset is engineered to be more comfortable and provide more noise reduction than any headset Bose has ever made, while still delivering the acclaimed clear audio you expect. In addition, it now offers you upgraded features including a Bluetooth® audio and communications interface,* customizable audio prioritization control, intuitive operation, a high-performance microphone and an optional coil cord.* It also has flexible power circuitry* with auto-on that switches seamlessly to and from battery power and aircraft power. The A20 headset is certified to FAA TSO C139 standards. Plus, it’s among the lightest of all active noise canceling headsets, with a weight of just 12 ounces. –– No other headset offers this unique combination of features and benefits –– Acclaimed noise reduction for pilots—30% greater active noise reduction than conventional headsets –– Comfortable, stable fit with 30% less clamping force than conventional headsets –– Clear audio with active equalization –– Bluetooth® audio and communications interface for connectivity with your communications and navigation devices†* –– Customizable audio prioritization control: choose “mute” to immediately mute an audio signal when receiving a communication; choose “mix” to mix in-bound communication with your Bluetooth or plugged-in audio signal† –– Simple, intuitive headset operation—plug it in, turn it on, go flying† –– Coil cord down-cable now available†* –– Connect the mic to either the left or right ear cup –– Flexible power with auto-on—headset switches seamlessly to and from battery power and aircraft power* –– Certified to FAA TSO C139 standards –– Among the lightest of all noise canceling headsets, with a weight of just 12 ounces –– High-performance microphone† –– At least 45 hours of typical headset use from two AA batteries †Upgraded feature for this headset *Available in certain variants of the headset

weight: dimensions:

218

EDMO# 3248430010

MFR# 324843-0010

DESCRIPTION Bose® A20® Aviation Headset Assembly only

BOSE® A20® AVIATION HEADSET OPTIONS To see all available part numbers for Bose® A20® Aviation Headset, visit us online at edmo.com or call our friendly sales staff at 1.800.235.3300 to discuss your options. The table below describes the feature combinations available for Bose A20 Aviation Headsets.

Bluetooth®: power options: microphone: cord: connector:

included or not included flexible power, battery power, or aircraft power dynamic or electret straight or coiled 8 pin connector, 6 pin connector, 5 pin XLR connector, twin plug, UC-584 or U-174 plug

Versions also available for use in Robinson helicopters; these versions equipped with a 6-inch cable from control module to connector. Includes electret mic, flex power, 6 pin connector and Bluetooth options.

EDMO#

MFR#

DESCRIPTION

BOSE® A20® AVIATION HEADSET ACCESSORIES 3270770010 3270780010 3270790010 3270800010 3270800020 3270810010 3313660010 3313670010 3313680010 16003 32175 3231720010

327077-0010 327078-0010 327079-0010 327080-0010 3270800020 327081-0010 331366-0010 331367-0010 331368-0010 16003 32175 3231720010

carry case headband cushion kit foam ear cushion kit 6 pin to twin plug adapter 6 pin to single plug/heli adapter auxiliary input cable adapter service accessory kit clothing clip earcup down cable cover electret microphone windscreen dynamic microphone windscreen aircraft power installation kit

CABLE ASSEMBLY OPTIONS To see all available part numbers for Bose® A20® Aviation Headset cable assemblies, visit us online at edmo.com or call our friendly sales staff at 1.800.235.3300 to discuss your options. The table below describes the feature combinations available on Bose A20 cable assemblies. Bluetooth®: power options: microphone: cord: connector:

included or not included flexible power, battery power, or aircraft power dynamic or electret straight or coiled 8 pin connector, 6 pin connector, 5 pin XLR connector, twin plug, or U-174 plug

Versions also available for use in Robinson helicopters equipped with a 6-inch cable from control module to connector. Includes electret mic, flex power, 6 pin connector and Bluetooth options.

12 oz 8.4 × 6.3 × 3.2 in

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Just the right fit. ELTs for every job.

LEFT TO RIGHT: EMERGING LIFESAVING TECHNOLOGIES 406GPS ELT, ARTEX ELT 3000, ACK E-04 ELT, ARTEX ELT 345, MCMURDO KANNAD INTEGRA ELT

FEATURED PRODUCT LINE: ELTS When it comes to ELTs, selection is important. No one ELT fits the parameters of every install job, budget, or aircraft. That’s why EDMO Distributors maintains a wide range of ELT options—to serve the unique needs of each customer. For fast installs, EDMO carries options like the versatile cost- and space-saving Artex ELT 345 and the newly released Artex ELT 3000, the smallest, lightest tri-frequency ELT with a built-in GPS interface (ARINC429 or RS 232). Conversely, some customers may require units like the McMurdo Kannad Integra ELT or the 406 ELT from Emerging Life Saving Technologies; ELTs that provide robust options like internal GPS devices, GPS antennas, or GPS nav interface backup systems. No matter the job, EDMO has the right ELT. Visit us at edmo.com or speak to our sales staff at 1.800.235.3300 and be sure to request a copy of our ELT product line brochure with an included ELT battery reference poster.

CHECK OUT OUR FULL RANGE OF ELTS & ACCESSORIES IN SECTION 8.

Headsets, Intercoms & Accessories Active Headsets

ASCEND ANR HEADSET TELEX COMMUNICATIONS INC

11

Comfort, clear sound, and innovation combined. Telex’s Ascend Headset provides a redesigned, more comfortable fit with high quality sound. This versatile design was created for the cockpit but is easily configured for personal use with the ability to change the connector, remove the boom, or add a battery. The advanced noise reduction (ANR) system coupled with limited speaker output and high-bandwidth frequency response provides the wearer with crystal-clear sound. A unique chassis equipped with pivoting ear cups provides a comfortable fit and can be swiveled a full 180° for easy storage. –– Completely redesigned next generation headset frame provides a more comfortable fit with a new headband pad and improved adjustments on the ear cups and sliders –– Provides clear sound with automatically limited speaker output, an advanced noise reduction system, and high-bandwidth frequency response –– Advanced noise reduction (ANR) system shields out common cockpit noises like wind or avionics cooling fans (ANR is powered by a mic bias or rechargeable battery module) –– Highly adjustable design accommodates use in the cockpit but transitions easily to recreational applications with a removable boom and interchangeable connector –– Headset can be folded flat for storage; the unique chassis has pivoting ear cups that provide a comfortable fit for the user and with 180° of rotation, the headset can be folded up for easy storage –– FAA/TSO C139 approved –– Flexible cord can be easily coiled

weight: cord length:

8 oz 5.91 ft

environments but remains on while the aircraft intercom system is in use, during cellphone conversations, while music is playing, and when cabin noise exceeds 90 dB. –– Provides ANR of up to 16 dB and PNR of greater than 29 dB –– The amplified electret noise-canceling microphone removes unwanted cabin noise and is attached to a boom that rotates so that it can be worn on either side of the head; the microphone housing is designed with retaining hooks that hold the windscreen in place –– Customizable comfort—the headband has a dented slide adjustment that raises or lowers the ear cups while the yoke design allows the earcups to pivot freely to achieve a proper seal to the head and evenly distributed pressure; ear cup pressure can be further adjusted using the patented Comfort Cam feature –– Headband and ear cups are fitted with 1-inch thick, heat-sensitive, slow recovery foam conforms to the wearer’s head for the best possible seal and comfort –– Equipped with an auto shut-off feature that turns the headset off automatically after 15 minutes in low-noise environments; when this feature is enabled, the headset is kept on by communication over the aircraft intercom system, cell phone conversations, listening to music, and cabin noise greater than 90 dB –– Includes a battery/user interface module that places the most commonly used controls at the pilot’s fingertips including a jack for cell phone use, an auxiliary input for listening to a portable music player, the power on/off button, an accessory mute button that quickly disables all functions while maintaining radio/intercom communication, and a DC input jack for charging the device –– Comes with RFI shielded cables that are resistant to strain and bending –– Includes a separate receiver and microphone plugs for plugging into the aircraft radio/intercom system as well as cables with plugs for cell phone, CD player, and mp3 use –– Batteries may be recharged through the included cigarette lighter adapter or AC wall adapter

weight: cord length:

EDMO# EDMO# PRD252100 PRD252150

MFR# PRD000252100 PRD000252150

CONNECTOR TYPE standard plug & jack XLR 5-pin

PRD11100

17.99 oz (510 g) 6.5 ft (1.9812 m)

MFR# PRD000011100

DESCRIPTION: Stratus 30XT Headset

ACCESSORIES 63966-000

63966000

PT-300 push to talk switch with hookand-loop strap, coiled cord, std. plug jack adapter

STRATUS 30XT HEADSET TELEX COMMUNICATIONS INC The Stratus 30XT ANR headset provides active noise reduction (ANR) up to 16 dB coupled with another 29 dB passive noise reduction (PNR) while its noise-canceling electret mic ensures the clearest-possible transmissions. In addition to its noise reduction capabilities, the Stratus 30XT provides a comfortable, customizable fit with an adjustable headband, swiveling, adjustable ear cups, and ear cushions padded with a layer of 1-inch thick slow recovery foam that conform to the wearer’s head and provide a perfect seal. This headset incorporates a handy auto shut-off feature that automatically shuts off the headset after 15 minutes in low-noise

AIRMAN 850 ULTRA-LIGHTWEIGHT ANR HEADSET TELEX COMMUNICATIONS INC The Airman 850 Ultra-Lightweight ANR Headset is designed for use in aircraft with low noise levels; it provides up to 12 dB of active noise reduction that targets the higher frequency wind and equipment noise usually found in jet cockpits. An amplified, noise-canceling electret mic ensures clear communications and the mic’s flexible rotating boom provides a degree of customization while also protecting the headset cordage. Providing exceptional lightweight comfort, the Airman 850 301317-002

220

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Active Headsets

weighs only 4 ounces and provides an adjustable fit with two inches of up and down earphone adjustment per side and gimbal mounting that improves the headset’s side-to-side comfort. –– Provides up to 12 dB of noise reduction and weighs just four ounces –– Designed with adjustable headband that gives the wearer two inches of up and down earphone adjustment per side while gimbal mounting provides side-to-side comfort –– Equipped with a miniature, amplified, noise-canceling electret microphone that provides superior 400 Hz hum rejection; the flexible boom rotates 320° and can be worn on either side of the head and comes with a replaceable windscreen that minimizes popping, hissing, and breathing sounds –– Includes an on/off switch to control ANR power and a hi/low switch for controlling receiver volume –– The microphone cordage uses RFI and EMI shielded wire; all cordage is tucked inside the boom for added protection and a strain relief on the cord provides added durability

weight: cord length: FAA TSO approvals:

EDMO#

3.8 oz (without cord) 301317-000: 5.5 ft +/-0.5 ft 301317-002: 6.5 ft +/-0.5 ft 301317-003: 5.5 ft +/-0.5 ft C57a and C58a

MFR#

301317-000

301317-000

301317-002

301317-002

301317-003

301317-003

DESCRIPTION dual sided, 150 ohm, GA (PJ-068 or equivalent) connector dual sided, 600 ohm, XLR-5 type connector for Airbus dual sided, 600 ohm, (PJ-068 or equivalent) connector

GEL-FILLED EAR CUSHION KIT

EDMO# 800027-002 MFR# 800027002 Replacement gel-filled ear cushions for Telex headsets. Compatible with the following Telex headsets: Air 3500, 3500HE, 3000, 4000, 4100, ANR, ANR-1D. Sold as a pair.

FOAM EAR CUSHIONS

EDMO# 800456-008 MFR# 800456-008 Compatible with the following Telex headsets: Air 3500, ANR 150, and Stratus 30. Sold as a pair.

EAR CUSHIONS/STRATUS 50D/30XT

EDMO# 800456-021 MFR# 800456021 Replacement ear cushions for Stratus 50D and 30XT headsets.

MFR# 800456000

800456-001

800456-001

DESCRIPTION: elongated microphone windscreen for: AIR 3500, ANR, PRO Air Series, Echelon, Air 3100 lightweight microphone windscreen for Airman ANR 500 and Airman 750

DC PRO-XP ENC ACTIVE HEADSET DAVID CLARK COMPANY INC The DC Pro-XP has a six-pin connector for use with panel mount installations and provides hybrid electronic noise cancellation and Bluetooth® technology combined with digital signal processing for high fidelity communications, and dual voice coil for fail-safe operation. This headset spares nothing on comfort for the user with soft leatherette ear seals and a lightweight magnesium alloy suspension. –– Hybrid Electric Noise Cancellation provides active noise cancellation –– Bluetooth® technology provides seamless integration of cellphones, MP3 players, tablets, or other personal devices –– Dual voice coil drivers provide fail-safe operation while ensuring full communication in the event of battery loss or system failure –– Digital Signal Processing (DSP) technology provides high fidelity audio for superior communications and music listening –– Audio Mute feature reduces auxiliary audio volume to prevent missed communications –– Stereo/Mono selection is compatible with all aircraft audio panel configurations –– Equipped with Dura-stitched leatherette ear seals with slow recovery foam cushioning and a low-profile leatherette head pad with a breathable, vented design that eliminates hot spots –– Compact, in-line control module with backlit, touch key user interface controls on/off, Bluetooth wireless technology, and volume control (powered by two AA batteries for up to 50 hours of use –– Lightweight magnesium alloy headband and suspension is adjustable and collapsible so that it can be easily folded up and stored –– Weight: ≈ 8.4 oz (without cable) EDMO# 43100G-01 43100G-02

MFR# 43100G-01 43100G-02

11

TELEX HEADSET ACCESSORIES

EDMO# 800456-000

DESCRIPTION base model same as 43100G-01 but includes 5-pin (Airbus) connector

Not finding what you need? EDMO carries several headset brands. If you don’t see the model you want here, check out our website at edmo.com or give our friendly sales staff a call at 1.800.235.3300 for available parts and pricing.

TELEX MICROPHONE WINDSCREENS Microphone windscreens compatible with Telex products. Each windscreen provides protection for the microphone while reducing background noise.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

221

Headsets, Intercoms & Accessories Active Headsets

MODEL H10-13X ENC ACTIVE HEADSET DAVID CLARK COMPANY INC The Model H10-13X ENC Active Headset provides crisp, clear audio quality with electronic noise-canceling (ENC) performance. When ENC is activated, the H10-13X provides 23 dB passive noise reduction and an additional 17-22 dB low-frequency noise attenuation. A noise-canceling M-7A electret microphone and delivers crisp transmission while a reduced-pressure headband fitted with plenty of padding offers a comfortable fit. –– Provides 23 dB of passive noise H10-13X reduction with an additional 1722 dB low-frequency noise attenuation when ENC is activated –– Designed with a super-soft, double-foam head pad and large, lightweight Comfort Gel ear seals and a headband designed to produce less pressure on the head –– Pilot selectable automatic shut-off feature –– Includes a battery power module with a 9-volt battery that provides up to 25 hours of operation –– A flex/wire boom makes it easy for the wearer to adjust the placement of the M-7A noise-canceling electret microphone –– In-line stereo/mono switch –– Stereo is compatible with stereo intercom and cabin entertainment system –– Steel chrome lock nut headband

11

MODEL H10-13XP Similar to the H10-13X but is capable of operating on the aircrafts power via a supplied permanent panel mount module. This variant includes the headset, an attached 5-foot extended coil cord, quick release connector and a panel mount module that comes with all necessary hardware and instructions for flush, bracket, or surface mounting. –– Designed for fixed-wing aircraft –– Dual plugs

weight:

H10-13X: 18 oz H10-13XP: 22 oz FAA TSO approved C57 Cat. B and C58a

approvals:

EDMO#

MFR#

H10-13X 40411G-06 H10-13XP 40600G-02

DAVID CLARK HEADSET ACCESSORIES SUPER-SOFT, DOUBLE FOAM HEAD PAD KIT FOR H10-13-SERIES HEADSETS EDMO# 40688G-36 MFR# 40688G-36 The Super-Soft, Double Foam Head Pad kit dissipates headset weight with a tapered cushion and a unique center hinge that allows the head pad to “breathe” for improved comfort. This head pad is compatible with David Clark H10-Series headsets including: H10-13.4, H10-13N, H10-13S, H10-13H, and H10-13X.

UNDERCUT COMFORT-GEL EAR SEALS

EDMO# 40863G-02 MFR# 40863G-02 Undercut Comfort-Gel Ear Seals are constructed with a patented undercut design that increases surface-area contact with the wearer’s head without a substantial increase in weight. The undercut ear seal design also results in more interior room for the wearer’s ears—ensuring quieter, more comfortable flights. These ear seals are compatible with David Clark H10-Series headsets and hearing protectors. Sold in pairs.

EAR SEAL

EDMO# 18316G-07 MFR# 18316G-07 Soft, dependable foam-filled ear seals provide a perfect fit that is both comfortable and secure. Intended for use with most David Clark headsets except for H20-10 standard and ENC Models. Sold in pairs.

GEL-FILLED EAR SEALS Flo-Fit Gel-Filled Ear seals provide incredible comfort and a consistently soft, cushioned fit. Sold in pairs.

EDMO#

MFR#

40243G-02

40243G-02

40243G-05

40243G-05

COMPATIBLE WITH: Most David Clark headsets except H20-10 standard and ENC models H20-10, H20-10S, H20-16

DESCRIPTION H10-13 headset with 5-foot straight cord H10-13 headset with 5-foot coil cord and panel mount power module

EAR SEAL COMFORT COVERS

EDMO# 22658G-01 MFR# 22658G-01 Constructed with soft, double-knit, 100% cotton, these washable ear seal covers are easy to maintain and provide an extra layer of comfort with the ability to absorb moisture in hot, humid weather. Compatible with most David Clark ear seals except for H20-Series and X-Series (ENC) headsets. Sold in pairs.

FILTER

EDMO# 25629P-03 MFR# 25629P-03 Ear seal filter for H1 and H3 Series headsets.

222

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Active Headsets

EAR CUP DOME FILTER

EDMO# 14096P-09 MFR# 14096P-09 Foam dome filter fits inside the ear cups of David Clark Headsets. Fits the following David Clark headsets: H10-13.4, H10-13N, H1013S, H10-13H, H10-13Y, H10-20, H10-21, H10-26, H10-30, H10-36, H10-56, H10-56N, H10-60, H10-60C, H10-60H, and H10-00.

PILLOW HEAD PAD

EDMO# 40075G-02 MFR# 40075G-02 The pillow head pad has a four-chamber design that provides a combination of comfort and durability. Intended for use with most David Clark headsets except for the H20-Series.

SOFT FOAM HEADPAD

EDMO# 18900G-45 MFR# 18900G-45 David Clark’s soft, foam-filled head pad is constructed with soft foam and a cotton cloth cover for cushioned comfort. Compatible with the following David Clark headsets: H10-20, H10-21, H10-26, H1030, H10-36, H10-56N, H10-56, H10-60, H10-60C, H10-60H, H10-00, H10-56, H1056HXL, H10-56HXP.

FOAM HEADPAD RESTRAINT

STOP GAP EYEGLASS TEMPLE CUSHIONS

EDMO# 12500G-02 MFR# 12500G-02 Stop Gap Eyeglass Temple cushions provide comfort and a good seal around eyeglasses to prevent noise from leaking through the gap often created by eyeglass frames. Sold in pairs.

DAVID CLARK MICROPHONE WINDSCREENS

FARO AVIATION LLC The Faro® G2 headset with active noise reduction (ANR) reduces cockpit noise up to 52 dB. The Faro® G2 uses a combination of passive noise reduction (PNR) and active noise reduction technology (ANR) to reduce ambient noise in the aircraft. Active noise reduction is achieved by placing a microphone inside the ear cup that listens to ambient noise and generates “anti-noise” into the speakers to cancel out unwanted ambient noise. –– Noise canceling electret microphone and fully adjustable beam with windscreen allows communication to be heard loud and clear –– Premium leather ear protection provides 23 dB in passive noise reduction and additional 29 dB noise reduction G2-A-BLACK with active noise reduction –– Large, soft cushions made of durable fiber provide added comfort for long flights –– MP3/Audio compatible with built in 3.5 mm audio jack and included auxiliary cable –– Weight: 23 oz

G2 ANR PROTECTED HEADSET VERSIONS The Faro® G2 Protected Headset adds the G2 headset to a protective helmet. This headset uses active noise reduction (ANR) and includes a noise canceling electret mic, MP3 capability, and soft silicone gel ear protection. Large, comfortable head pad –– Noise canceling electret microphone –– MP3/Radio/iPod/iPad compatible –– Super soft silicone gel ear protection –– Engineered in the United States EDMO# G2-A-BLACK G2-A-GRAY G2-A-BLUE G2-A-GREEN

MFR# FARO-G2ANR-BLACK / X000T93H85 FARO-G2ANR-GRAY / X000T93H71 FARO-G2ANR-BLUE FARO-G2ANR-GREEN / X000T93H7B

11

EDMO# 40266G-01 MFR# 40266G-01 Foam headpad restraint for David Clark headsets. Compatible with the following models: H10-13.4, H10-13H, H10-13HX, H10-13N, H10-13S, H10-13X, H10-13X, H10-13Y, H10-76, H10-76X, 40411G-16, 40762G-01.

G2 ANR HEADSET

COLOR AND/OR SIZE black gray blue green

PROTECTED / HELMET VERSIONS 40062G-01 40062G-02 18434G-02 David Clark microphone protectors/windscreens provide improved communications by reducing ambient noise during transmission. Check microphone model to get the right size. EDMO# 40062G-01 40062G-02 18434G-02

MFR# 40062G-01 40062G-02 18434G-02

G2-AHELMET G2AHELMETM G2AHELMETL G2AHELMETX

FARO-G2ANR-HELMET FARO-G2ANR-HELMET FAR-G2ANR-HELMET FAR-G2ANR-HELMET

Small (55-56). Medium (57-58) Large (59-60) Extra Large (61-62)

HELICOPTER VERSION G2-AHBLACK

X000TO2IDP

black

DESCRIPTION: M-4 microphone protector M-7A microphone protector M-1/DC microphone cover

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

223

Headsets, Intercoms & Accessories Active Headsets G3 ANR HEADSET FARO AVIATION LLC

EDMO# FARO-G3 MFR# FARO-G3 ANR The Faro G3® ANR headset is constructed carbon fiber, making it extremely lightweight with the kind of barely-there comfort that results from a total weight of nine (9) ounces. It features Bluetooth® connectivity, active noise reduction rated at 52 dB, premium speakers for crystal clear audio, and a 360° rotatable noise cancelling electret microphone. Faux leather ear cushions and a soft head cushion ensure that this lightweight headset’s nine ounces go unnoticed for hours of in-flight comfort. –– 100% carbon fiber construction for an airy, light fit –– Bluetooth™ compatible for audio and communication –– Active noise reduction rated at 52 dB –– 3.5 mm auxiliary audio input (cable included) –– 2xAA batteries required –– Weight: 9 oz

FARO HEADSET ACCESSORIES

11

GEL EARSEALS

EDMO# EAR-SEAL MFR# GEL-EAR-SEAL Faro Gel Ear Seals are designed with double-thickness silicone gel cushions and provide high noise reduction and a comfortable fit. Compatible with most aviation headsets including David Clark.

LEATHER EAR CUSHION

EDMO# EARCUSHION MFR# LEATHER-EAR-CUSHION Faro leather ear cushions are light, comfortable and ideal for long flights and hot days. Compatible with most aviation headsets.

PA-1779T ANR HEADSET PILOT USA

EDMO# PA-1779T MFR# PA-1779T The PA-1779T ANR Headset is a high-quality active noise reduction (ANR) headset designed with closer-tolerance military components that deliver an additional 18-22 dB of active noise cancellation at 100 Hz beyond the headset’s 25 dB of passive noise reduction. The charging process for this headset is simplified with an incorporated rechargeable nickel metal hydride (NiMH) battery and a standard 110 V wall charger. In addition, the PA1779T also has Auto On/Auto Shut-Off proprietary circuitry that automatically turns off the ANR when the unit is unplugged or the avionics master switch is turned off—resulting in a power savings that equates to less battery charging time and more time between each charging

224

1.800.235.3300 | edmo.com

session. This headset isn’t lacking for comfort either; it provides a cushy fit with a sheepskin fleece head pad and silicone gel ear seals. –– Provides 18-22 dB ANR and 25 dB PNR –– Equipped with Auto On/Auto Shut-Off that automatically turns off the ANR when the unit is unplugged from the aircraft or the avionics master switch is turned off, resulting in improved battery life and increased time between charging sessions –– Includes a noise canceling electret microphone –– Uses a rechargeable nickel metal hydride (NiMH) battery and standard 110 V wall charger –– Fitted with a sheepskin fleece head pad and proprietary silicone gel ear seals (30% less weight that normal gel ear seals) –– Cell and satellite phone cable with a stereo input jack that accommodates media players or external radio –– Comes with a cell phone system that is compatible with smartphones that use a 3.5 mm (4 conductor) input or older phones with a 2.5 mm input –– This headset bears the distinction of having been used by both the US and Russian space programs –– Comes with a padded protective case –– Weight: 16.9 oz

PA-1771T ANR HEADSET PILOT USA

EDMO# PA-1771T MFR# PA-1771T The PA-1771T ANR Headset a high quality active noise reduction (ANR) headset similar to the PA1779T. This headset uses the same proprietary auto on/auto shut-off circuitry that automatically turns on the ANR when plugged into an active intercom and automatically turns it off when unplugged and it provides the same comfortable fit with lightweight silicone ear seals and a sheepskin head pad. The PA-1771T headset relies on an external 9 V battery pack and to save power, the headset is design to automatically shut off when the headset is unplugged from the battery box or when the radio or avionics master switch is turned off. Like the PA-1779T, the PA-1771T is compatible with cellphones, satellite phones, and media players. –– Provides 20-22 dB ANR and 25 dB PNR –– Equipped with Auto On/Auto Shut-Off that automatically turns off the ANR when the unit is unplugged from the aircraft or the avionics master switch is turned off, resulting in improved battery life and increased time between charging sessions –– Includes a noise canceling electret microphone –– Uses an external battery pack (one 9 V) –– Fitted with a sheepskin fleece head pad and proprietary silicone gel ear seals (30% less weight that normal gel ear seals) –– Cell and satellite phone cable with a stereo input jack that accommodates media players or external radio –– Comes with a cell phone system that is compatible with smartphones that use a 3.5 mm (4 conductor) input or older phones with a 2.5 mm input –– Comes with a padded protective case –– Weight 13.4 oz

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Active Headsets

PA-1761T ANR HEADSET

11

PILOT USA

EDMO# PA-1761T MFR# PA-1761T The PA-1761T Active headset uses a Pilot Direct Noise Canceling System to provide active noise reduction. This system directs noise canceling toward the lower frequencies, which makes the PA-1761T unique among ANR headsets. Included within the ANR technology is an Enhanced Voice Intelligibility circuit that enhances speech frequencies by 2-4 dB on all incoming radio and intercom audio. The combined result of active noise reduction coupled with speech enhancing technology is improved intelligibility and an improved audio experience. Like other Pilot USA headsets, the PA-1761T provides comfort-enhancing features like gel ear seals, a pillow-top headpad, and earcups with individually adjustable sound levels. Meanwhile, a “true stereo” input jack provides compatibility with cellphones, tablets, and other media devices for in-flight communications and entertainment. –– Provides 24 dB passive noise reduction with an additional 16-19 dB active noise reduction using the Pilot Direct Noise Canceling System that directs noise-canceling toward the lower frequencies –– ANR technology includes an Enhanced Voice Intelligibility (EVI) circuit that enhances speech frequencies by 2-4 dB on all incoming radio/intercom audio –– Auto on/auto shut-off proprietary circuitry ensures that the ANR automatically turns on when plugged into an aircraft with radio turned on or when plugged into an active intercom; the headset shuts off automatically when unplugged from the battery box or when the radio or avionics master switch is turned off—the headset can also be manually turned off using the toggle switch on the battery box –– Cell/satellite phone capable with a “true stereo” input jack that provides compatibility with tablets and cell phones with 3.5 mm (4 conductor) inputs or a 2.5 mm input –– Provides a comfortable fit with silicone gel ear seals and a pillow-top headpad –– A full Flex microphone boom allows the user to adjust the mic position according to their preferences –– Volume controls on each ear cup allow the wearer to individually adjust volume levels on each ear –– Comes with a soft carrying case –– Weight: 16.9 oz

PILOT USA HEADSET ACCESSORIES GEL EAR SEALS Silicone gel ear seals for most conventional headset styles. Easy to install— simple slide-on design.

EDMO#

MFR#

FL-ES-15 FL-ES-HEL

PA-22G PA-22GL

DESCRIPTION gel ear seals gel ear seals – large size

CLOTH EAR SEAL COVERS

EDMO# PA-20 MFR# PA-20 Cloth ear seal covers prolong the life of headset ear seals while also adding an additional layer of comfort for the wearer. These covers are constructed with washable 100% cotton, that is designed to absorb moisture in hot, humid environments. Sold in pairs.

PILOT USA MICROPHONE WINDSCREENS

PA-10

PA-10L

PA-11

Windscreens for Pilot USA microphones protect headset microphones while improving sound quality by reducing interference from wind and other background noises. EDMO#

MFR#

PA-10

PA-10

PA-10L

PA-10L

PA-11

PA-11

DESCRIPTION/USE: small foam windscreen for electret mic; fits PA-5, PA-7, PA-9 or equivalent large foam windscreen for dynamic mic; fits M-101, M-87 or equivalent leather mic cover and foam windscreen for electret mic; fits PA-5, PA-7, PA-9 or equivalent

Looking for helicopter helmets and accessories? See page 246.

226

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Passive Headsets

PASSIVE HEADSETS AIR 3100 PASSIVE HEADSET TELEX COMMUNICATIONS INC

weight: approvals:

14.22 oz FAA TSO C57a and C58a

AIR 3500 PASSIVE HEADSET TELEX COMMUNICATIONS INC EDMO# 300400-000 MFR# 300400-000 The AIR 3500 Passive Headset was designed to provide the best of both worlds in headset design, maximizing noise reduction and comfort while reducing weight as much as possible. The soft, cushioned ear cups are optimized for broad-spectrum noise reduction to better attenuate low frequency noise. Attenuation can be further adjusted using the three QuickSet pressure settings that allow the wearer to make adjustments according to their comfort and the

EDMO DISTRIBUTORS

weight: approvals:

13.44 oz FAA TSO C57a and C58a

5X5 PRO III PASSIVE HEADSET TELEX COMMUNICATIONS INC The 5x5 Pro III Passive Headsets are lightweight, single-sided headsets with an eartip-style receiver that provides crisp speech intelligibility in quiet to moderately noisy environments. –– Equipped with an eartip style receiver that provides better speech intelligibility than an earmuff-style headset in quiet to moderate noise conditions –– The adjustable headband is comprised of two stainless steel springs covered with soft polypro64000-100 pylene webbing; the springs can be bent to adjust the lateral pressure on the head –– Includes a detachable headband and pivot assembly that can be rotated over a 180-degree range, allowing the microphone boom to be positioned on either side of the head –– Headband is cushioned with soft polyester-urethane foam head pads –– Can be paired with a push-to-talk switch

weight: approvals:

EDMO# 64000-100

11

EDMO# 300048-200 MFR# 300048-200 The Air 3100 Passive Headset combines the best of both worlds with solid noise protection and a comfortable, cushioned, lightweight fit. The foam-filled headband pad and gel ear cushions evenly distribute the weight of the headset to alleviate pressure points. The headset’s boom arm provides a customizable fit with a flexible boom arm and sealed ball and socket joint that allow the boom to be positioned as needed. The Air 3100 also features a replaceable microphone cartridge and an adjustable microphone amplifier. The entire headset is designed to fold down small for efficient storage. –– Provides a comfortable fit with a foam-filled headband pad that evenly distributes the headset weight without pressure points –– The soft, lightweight gel ear cushions provide an excellent acoustic seal and are designed for longevity with an outer urethane layer –– The flexible microphone boom is designed with a sealed ball-andsocket joint that makes it possible for the user to precisely position the microphone where needed on either side of the head –– Equipped with a noise-canceling electret element with a cartridge that snaps on and off for quick replacement; the microphone amplifier housed in the microphone cartridge can be adjusted through an opening in the mic assembly –– Cordage is designed for durability: the mic cartridge is protected inside the boom arm, all wire used in the headset is shielded from RFI and EMI, and strain-reliefs on all cords provide maximum durability –– Folds into an extremely compact shape for storage and transport

amount of aircraft noise. In addition, volume can be controlled for each ear individually and the microphone boom can be worn on either side of the head. A generously cushioned, foam-filled headband and adjustable headband frame ensure a good fit without pressure points. –– Provides 24 dB passive noise reduction –– The wearer can select from three quick-set headset pressure settings that set the comfort/noise attenuation setting based on the amount of ambient aircraft noise; these adjustments can be dialed in using the dual-eccentric tension adjustment knobs –– Designed for comfort with a foam-filled headband pad and ear cushions that evenly distribute the headset weight without any pressure points –– The earcups are optimized to provide broad-spectrum noise reduction, resulting in better attenuation for low frequency noise; an outer urethane layer prevents wear and tear –– Volume is individually adjustable for each ear –– Boom can be positioned on either side of the head –– Mountings for the boom and earcups are also used as cord entrances to minimize the number of openings built into the earcups –– Durably constructed with cadmium-bronze wire and tapered strain reliefs with polypropylene insulation over wires and a urethane jacket for; all wires are RFI and EMI shielded

4.27 oz FAA TSO C57a and C58a

MFR# 64000-100

DESCRIPTION standard model

1.800.235.3300 | edmo.com

227

Headsets, Intercoms & Accessories Passive Headsets

EDMO# 64000-103

MFR#

DESCRIPTION

64000-103

for KC-10 aircraft

AIRMAN 750 PASSIVE HEADSET TELEX COMMUNICATIONS INC

11

One of the most popular headsets in the world, the Airman 750 Passive Headset provides lightweight comfort and adaptability, weighing in at just over 3 ounces. The fit can be customized to the wearer—the earphone housings are mounted on stainless steel sliders that allow over two inches of adjustment and the microphone boom is both flexible and reversible, so it can be worn on either side of the head. There are two versions of the Airman headset available: the Airman 750, which includes an amplified, noise-canceling electret mic and the Airman 760, 64300-200 consisting of headphones only. –– Open-air style earphones provide comfort during long flights and are designed for adaptable usage—the earphone housings are mounted on stainless steel sliders that provide over two inches of fit adjustment, and the removable ear cushions are designed for quick field replacement –– Flexible microphone boom can be worn on either side of the head –– Comes with miniature, amplified, noise-canceling electret microphone that provides 400 Hz hum rejection –– Two versions available: the Airman 750 with mic and the Airman 760 which consists of headphones only

weight: approvals:

3.2 oz 64300:200: FAA TSO C57a and C58a 64400-200: FAA TSO C57a

–– Provides noise reduction greater than or equal to 25 dB –– A built-in audio interface allows the wearer to connect media players and cellphones to the headset—with the ability to mute the devices as needed with one simple on/off switch –– Clear transmission is provided by the noise-canceling electret boom microphone –– The headband size can be dial in using either the earcup sliders or by adjusting the three built-in pressure settings that improve the seal between the cushioned earcup and the head –– A stereo mono switch on the Y-cord can be set to mono for monaural intercom systems or for direct connection to the aircraft radio –– Each ear cup is equipped with individual volume controls –– Includes a deluxe carrying case –– Weight: 13.62 oz

TELEX HEADSET ACCESSORIES GEL-FILLED EAR CUSHION KIT

EDMO# 800027-002 MFR# 800027002 Replacement gel-filled ear cushions for Telex headsets. Compatible with the following Telex headsets: Air 3500, 3500HE, 3000, 4000, 4100, ANR, ANR-1D. Sold as a pair.

FOAM EAR CUSHIONS

EDMO# 800456-008 MFR# 800456-008 Compatible with the following Telex headsets: Air 3500, ANR 150, and Stratus 30. Sold as a pair.

TELEX MICROPHONE WINDSCREENS Microphone windscreens compatible with Telex products. Each windscreen provides protection for the microphone while reducing background noise. EDMO#

EDMO# 64300-200 64300-210 64300-300 64400-200

MFR# 64300-200 64300-210 64300-300 64400-200

DESCRIPTION Airman 750 Airman 750 with XLR-5-12C connector for Airbus Airman 750 single sided Airman 760, same as Airman 750 but does not include a microphone. Approved to TSO C57a only.

MFR#

800456-000

800456000

800456-001

800456-001

DESCRIPTION: elongated microphone windscreen for: AIR 3500, ANR, PRO Air Series, Echelon, Air 3100 lightweight microphone windscreen for Airman ANR 500 and Airman 750

MODEL H10-60 SERIES PASSIVE HEADSET DAVID CLARK COMPANY INC

ECHELON 25XT PASSIVE HEADSET TELEX COMMUNICATIONS INC

EDMO# PRD13000 MFR# PRD000013000 The Echelon 25XT Passive Headset provides a powerful combination of comfort and technology at an excellent price point. The cushioned, adjustable headband is paired up with a built-in audio interface that allows the user to connect cellphones and audio players to the headset with the ability to mute them when needed. Crisp, clear voice transmission is provided by a noise-canceling electret microphone.

228

1.800.235.3300 | edmo.com

The H10-60 Series headsets provide a noise reduction rating of 23 dB and are designed to go the distance with a plush, comfortable fit for long-distance flights. Headsets in this series are constructed with an adjustable headband, cushioned head pad, and gel ear seals that provide even pressure on the wearer’s head. The headset’s M-7A microphone is attached to a patented flex/wire boom that can be precisely positioned by the user. Available in three different cord and plug configurations. –– Noise reduction rating of 23 dB –– Equipped with an M-7A microphone

H10-60H

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Passive Headsets

–– Constructed with a flex wire boom for precise microphone placement and a boom guide lock –– Volume is easy to adjust using the dual volume control for each ear –– Designed for comfort with a super-soft, foam-filled pillow headpad and Comfort Gel ear seals –– Adjustable headset pressure and headband size, steel chrome, lock nut

weight: approvals:

EDMO# H10-60 H10-60C H10-60H

22 oz (headset only) FAA TSO C-139 RTCA/DO-214 standards

MFR#

CORD

40128G-01 40128G-02 40128G-03

PLUGS

AIRCRAFT

MIC

5-foot straight 5-foot coil 5-foot coil

dual dual U-174-U

fixed wing fixed wing helicopter

M-7A M-7A M-7A

5-foot coil

U-174-U

helicopter

M-101

MILITARY OPTION H10-66

18283G-03

MODEL H10-30 SERIES PASSIVE HEADSET

MODEL H10-20 PASSIVE HEADSET DAVID CLARK COMPANY INC The Model H10-20 headset provides 24 dB of passive noise reduction coupled with a comfortable fit created by a super-soft head pad and large, lightweight Comfort Gel ear seals. A Flex boom assembly allows the wearer to adjust the M-7A noise-canceling microphone to their preferences. –– Certified noise reduction rating of 24 dB –– Designed for comfort with a soft head pad and lightweight, undercut Comfort Gel ear seals H10-20 –– Includes a Flex boom assembly that can be adjusted for perfect microphone placement and an M-7A, advanced noise-canceling microphone –– Includes a low-profile volume control knob with detent settings –– Steel chrome, lock nut headband

weight: approvals:

19 oz FAA TSO C57 Cat. B and C58a RTCA/DO-214 standards

DAVID CLARK COMPANY INC

weight: approvals:

EDMO# H10-30 H10-36

20 oz FAA TSO C57 Cat. B and C58a RTCA/DO-214 standards

MFR#

CORD

12508G-17 5-foot straight 12508G-20 5-foot coil

EDMO DISTRIBUTORS

PLUGS dual single

AIRCRAFT fixed wing helicopter

MIC M1/DC M1/DC

EDMO# H10-20 H10-26

MFR# 40074G-01 40074G-02

CORD 5-foot straight 5-foot coil

PLUGS dual single

AIRCRAFT fixed wing helicopter

MODEL H10-13.4 SERIES PASSIVE HEADSET

11

The H10-30 Series passive headsets provide solid comfort and noise protection at an excellent price point for veteran aviators and student pilots alike. Model H10-30 headsets are fitted with plush head pads and Comfort Gel ear seals with a flexible wire boom that makes it easy to customize mic placement. –– Certified noise reduction rating of 24 dB –– Provides a comfortable fit with a super soft head pad and larger, lighter, undercut Comfort Gel ear H10-30 seals –– Wire boom for easy mic placement –– Equipped with an M-1/DC amplified, dynamic microphone –– Comes with a molded cord assembly made to withstand pulls and flex –– Steel chrome, lock nut headband

DAVID CLARK COMPANY INC A tried-and-true classic, the Model H10-13.4 Series Passive headsets are well known in the aviation industry for their comfort and reliability. The H10-13.4 provides 23 dB certified noise reduction paired with a comfortable fit made possible by David Clark’s signature double foam head pad and Comfort Gel ear seals. This headset provides crisp communication with an M-7A noise canceling microphone that can be easily adjusted to the pilot’s preference using the Universal Flex boom. H10-13S –– Certified noise reduction rating of 23 dB –– Fitted with a super-soft, double foam head pad and Comfort Gel ear seals –– Universal Flex boom that is adjustable to the wearer’s preferences and an M-7A noise-canceling microphone –– Low-profile volume control knob with detent settings –– Durable molded cord assembly withstands pulls and flex –– Steel chrome, lock nut headband –– Part H10-13S is a stereo version with an inline stereo/mono switch –– Part H10-13 Y is a smaller version of the H10-13.4 designed for smaller head circumference

1.800.235.3300 | edmo.com

229

Headsets, Intercoms & Accessories Passive Headsets

–– Part H10-13N is the same as the H10-13.4 except that it is terminated with a NATO-type plug

weight: approvals:

EDMO# H10-13.4 H10-13S H10-13Y H10-13H H10-13N

16.5 oz FAA TSO approved C-57 cat. B and C58a

MFR# 40411G-01 40422G-01 40411G-04 40411G-02 H10-13N

CORD

PLUGS

5-foot straight cord 5-foot straight cord 5-foot straight cord 5-foot coil cord 5-foot straight cord

dual plugs dual plugs dual plugs single plug dual plugs

AIRCRAFT fixed wing fixed wing fixed wing helicopter fixed wing

MODEL H20-10 PASSIVE HEADSETS

11

DAVID CLARK COMPANY INC David Clark’s Model H20-10 passive headsets focus on the wearer’s comfort with lightweight, composite construction and a patented head pad suspension that provides plush, cushioned comfort. –– The head pad suspension system is constructed with advanced, lightweight composite materials and provides a comfortable fit with pillowy cushioning and contoured gel ear seals that conform to the wearer’s ears and head –– Headband design eliminates an exposed overhead cord –– Equipped with an M7-A noise-canceling microphone –– All cords are constructed to withstand pull and flex –– H20-10S is the stereo version and includes an inline stereo/mono switch

MODEL H3530 PASSIVE HEADSET DAVID CLARK COMPANY INC The Model H3530 Passive Headset is part of the Series 3800 UH60 Blackhawk VIP intercom system. –– Certified noise reduction rating of 24 dB –– Constructed with a corrosion-proof, chrome plated, headband and stirrup assembly –– Provides a comfortable fit with a soft headpad and ear seals and an adjustable Flex-Boom that allows the wearer to position the mic as needed –– Includes an M-1A amplified dynamic microphone that provides superior noise cancellation –– Comes with a 30-inch straight cord with locking connect (SC298) to mate with C35-XX belt station (required) EDMO# H3530

MFR# 12508G-34

DESCRIPTION H3530 headset

ACCESSORIES C35-08

04016G-14

C35-16

04016G-13

C35-26

04016G-10

C35-30

04016G-11

18920G-02 18316G-02

18920G-02 18316G-02

C35-08 belt station for H3530 (8 ft coil cord and PJ-051 plug) C35-16 belt station for H3530 (16 ft straight cord and PJ-051 plug) C35-0268 belt station for H3530 (26 ft coil cord and PJ-051 plug) C35-30 belt station for H3530 (30 ft straight cord and PJ-051 plug) M-1A mic for H3530 and H3531 headsets foam-filled ear seals for use in David Clark ENC model headsets—sold in pairs and compatible with: H3530, H3531, H3335, H3312, and H3313

DAVID CLARK HEADSET ACCESSORIES SUPER-SOFT, DOUBLE FOAM HEAD PAD KIT FOR H10-13-SERIES HEADSETS

weight: approvals:

EDMO# H20-10 H20-10S

19 oz FAA TSO approved C-57 cat. B and C58a

MFR# 40495G-01 40495G-09

CORD

PLUGS

5-foot straight cord 5-foot straight cord

dual plugs dual plugs

AIRCRAFT fixed wing fixed wing

EAR SEALS FOR H20-10 HEADSETS 40243G-05 40243G-05

Gel-filled ear seals for: H20-10, H20-10S, H20-16

EDMO# 40688G-36 MFR# 40688G-36 The Super-Soft, Double Foam Head Pad kit dissipates headset weight with a tapered cushion and a unique center hinge that allows the head pad to “breathe” for improved comfort. This head pad is compatible with David Clark H10-Series headsets including: H10-13.4, H10-13N, H10-13S, H10-13H, and H10-13X.

UNDERCUT COMFORT-GEL EAR SEALS

Not finding what you need? EDMO carries several headset brands. If you don’t see the model you want here, check out our website at edmo.com or give our friendly sales staff a call at 1.800.235.3300 for available parts and pricing.

230

1.800.235.3300 | edmo.com

EDMO# 40863G-02 MFR# 40863G-02 Undercut Comfort-Gel Ear Seals are constructed with a patented undercut design that increases surface-area contact with the wearer’s head without a substantial increase in weight. The undercut ear seal design also results in more interior room for the wearer’s ears—ensuring quieter, more comfortable flights. These ear seals are compatible with David Clark H10-Series headsets and hearing protectors. Sold in pairs.

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Passive Headsets

EAR SEAL

EDMO# 18316G-07 MFR# 18316G-07 Soft, dependable foam-filled ear seals provide a perfect fit that is both comfortable and secure. Intended for use with most David Clark headsets except for H20-10 standard and ENC Models. Sold in pairs.

GEL-FILLED EAR SEALS Flo-Fit Gel-Filled Ear seals provide incredible comfort and a consistently soft, cushioned fit. Sold in pairs.

EDMO#

MFR#

40243G-02

40243G-02

40243G-05

40243G-05

COMPATIBLE WITH: Most David Clark headsets except H20-10 standard and ENC models H20-10, H20-10S, H20-16

FOAM HEADPAD RESTRAINT

EDMO# 40266G-01 MFR# 40266G-01 Foam headpad restraint for David Clark headsets. Compatible with the following models: H10-13.4, H10-13H, H10-13HX, H10-13N, H10-13S, H10-13X, H10-13X, H10-13Y, H10-76, H10-76X, 40411G-16, 40762G-01.

STOP GAP EYEGLASS TEMPLE CUSHIONS

EDMO# 12500G-02 MFR# 12500G-02 Stop Gap Eyeglass Temple cushions provide comfort and a good seal around eyeglasses to prevent noise from leaking through the gap often created by eyeglass frames. Sold in pairs.

DAVID CLARK MICROPHONE WINDSCREENS

EAR SEAL COMFORT COVERS

EDMO# 22658G-01 MFR# 22658G-01 Constructed with soft, double-knit, 100% cotton, these washable ear seal covers are easy to maintain and provide an extra layer of comfort with the ability to absorb moisture in hot, humid weather. Compatible with most David Clark ear seals except for H20-Series and X-Series (ENC) headsets. Sold in pairs.

FILTER

EAR CUP DOME FILTER

EDMO# 14096P-09 MFR# 14096P-09 Foam dome filter fits inside the ear cups of David Clark Headsets. Fits the following David Clark headsets: H10-13.4, H10-13N, H10-13S, H10-13H, H10-13Y, H10-20, H10-21, H10-26, H10-30, H10-36, H10-56, H10-56N, H10-60, H10-60C, H10-60H, and H10-00.

EDMO# 40062G-01 40062G-02 18434G-02

MFR# 40062G-01 40062G-02 18434G-02

DESCRIPTION: M-4 microphone protector M-7A microphone protector M-1/DC microphone cover

G2 PNR HEADSET FARO AVIATION LLC

EDMO# 40075G-02 MFR# 40075G-02 The pillow head pad has a four-chamber design that provides a combination of comfort and durability. Intended for use with most David Clark headsets except for the H20-Series.

The Faro® G2 PNR headset is lightweight and comfortable with precise, clear audio that uses passive noise reduction to reduce noise by 26 dB. –– Large cushions made of soft, durable fiber are built into the headband for a soft, comfortable fit –– Noise canceling electret microphone and fully adjustable beam with windscreen allows communication to be heard loud and clear –– Comfortable, ultra-thick silicone gel ear protection reduces noise by 26 dB –– MP3/Audio compatible with built in 3.5 mm audio jack and included auxiliary cable –– Weight: 13 oz

SOFT FOAM HEADPAD

G2 PNR PROTECTED HEADSET VERSIONS

PILLOW HEAD PAD

EDMO# 18900G-45 MFR# 18900G-45 David Clark’s soft, foam-filled head pad is constructed with soft foam and a cotton cloth cover for cushioned comfort. Compatible with the following David Clark headsets: H10-20, H10-21, H10-26, H10-30, H10-36, H10-56N, H10-56, H10-60, H10-60C, H1060H, H10-00, H10-56, H10-56HXL, H10-56HXP.

EDMO DISTRIBUTORS

11

EDMO# 25629P-03 MFR# 25629P-03 Ear seal filter for H1 and H3 Series headsets.

40062G-01 40062G-02 18434G-02 David Clark microphone protectors/windscreens provide improved communications by reducing ambient noise during transmission. Check microphone model to get the right size.

G2-GRAY

The Faro® G2 Protected Headset adds the G2 headset to a protective helmet. This headset uses passive noise reduction (PNR) for clearer audio quality and includes a noise canceling electret mic, MP3 capability, and soft silicone gel ear protection. –– Large, comfortable head pad –– Noise canceling electret microphone –– MP3/Radio/iPod/iPad compatible –– Soft silicone gel ear protection

1.800.235.3300 | edmo.com

231

Headsets, Intercoms & Accessories Passive Headsets

EDMO# G2-BLACK G2-BLUE G2-GRAY G2-GREEN

MFR#

COLOR OR SIZE OPTION

FARO G2-PNR / X000T93H67 FARO-G2-BLUE FARO-G2-GRAY FARO-G2-GREEN

LEATHER EAR CUSHION

blue gray green

EDMO# EARCUSHION MFR# LEATHER-EAR-CUSHION Faro leather ear cushions are light, comfortable and ideal for long flights and hot days. Compatible with most aviation headsets.

Small (55-56) Large (59-60) Medium (57-58) Extra Large (61-62)

PA-1161 PASSIVE HEADSET

black

PROTECTED / HELMET VERSIONS G2-HELMET G2-HELMETL G2-HELMETM G2-HELMETX

FARO-G2-HELMET FARO-G2-HELMET FARO-G2-HELMET FARO-G2-HELMET

HELICOPTER VERSION G2-H-BLACK

FARO-G2PNR-HELIBLACK

black

ACCESSORIES BAG-BLACK

FAROBAG-BLACK

BAG-GREEN

FAROBAG-GREEN

MIC-COVER

FARO-MIC-COVER

black headset bag—fits most aviation headsets green headset bag—fits most aviation headsets microphone cove for use with Faro headsets

AIR IN-EAR HEADSET

11

FARO AVIATION LLC

EDMO# FARO-AIR MFR# FARO-AIR The Faro Air In-Ear headset, as its name implies, is extremely lightweight weighing only 1 ounce. Though lightweight, this headset provides more than 30 dB of noise reduction with Faro’s slow-recovery composite foam ear tips. They are slightly longer than typical ear plugs to fit deeper into the ear canal and create an effective seal while exerting low pressure in the ear canal. It also features premium speakers rated at 280Ω, noise canceling electret microphone, replaceable foam ear tips, and padded ear hooks for a secure and comfortable fit. –– Weighs only one (1) ounce –– Provides over 30 dB noise reduction with slow-recovery composite foam ear tips that create an effective seal in the ear canal –– Auxiliary audio input –– Dual volume control –– Mono/Stereo switch –– Replaceable ear plugs offered in 3 sizes

weight: noise reduction:

1 oz more than 30 dB

GEL EARSEALS

EDMO# EAR-SEAL MFR# GEL-EAR-SEAL Faro Gel Ear Seals are designed with double-thickness silicone gel cushions and provide high noise reduction and a comfortable fit. Compatible with most aviation headsets including David Clark.

232

1.800.235.3300 | edmo.com

PILOT USA

EDMO# PA-1161 MFR# PA-1161 The PA-1161 Passive Headset is an entry level headset that is ideal for student pilots, passengers, or for those needing to purchase a spare headset at a lower price point. This headset is durably constructed with chrome hardware and a half-flex, half-metal microphone boom. The PA-1161 comes with an electret noise-canceling microphone and it provides mono/stereo capability with dual volume controls for each ear cup. Foam ear seals and a foam headpad ensure a soft, comfortable fit. –– Provides a passive NRR of 24 dB –– The chrome headband frame is cushioned with a foam headband and foam ear seals for long-lasting comfort –– The noise canceling electret mic can be positioned as needed on the half-metal, half-flex mic boom –– Volume can be individually adjusted on each earcup –– Equipped with mono/stereo capability –– Foam ear seals and a foam headpad provide a comfortable fit –– Weight: 15.4 oz

PA-1151ACB CADET PASSIVE HEADSET – CHILDRENS’ PILOT USA

PA-1151ACB

PA-1151ACG

Designed for the specific needs of young aviators, the PA-1151ACB Children’s Headset is a passive headset that is designed for smaller heads but includes all of the trimmings that come with an adult headset. To accommodate smaller head circumferences, this headset is designed with a smaller headband with a smaller version of Pilot USA’s SuperCushion headpad and a full, flexible microphone boom that is shorter than an adult-sized headset boom. This headset is also compatible with media players, so that little pilots-to-be can stay entertained in-flight with their tablet, laptop, or cellphone. –– Provides passive noise reduction of 24 dB

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Passive Headsets

–– Designed with a smaller version of the Pilot USA headband and SuperCushion headpad to accommodate smaller head sizes –– Includes a shorter full, flexible microphone boom to ensure proper placement of the noise canceling microphone –– Compatible with media players including tablets, laptops, and cellphones –– The headband may be swapped out for larger headbands over time –– PA-1151ACB has one red ear cup and one blue ear cup –– PA-1151ACG has pink ear cups –– Weight: 11.9 oz EDMO# PA-1151ACB PA-1151ACG

MFR#

DESCRIPTION

PA-1151ACB PA-1151ACG

Cadet Headset –boys’ Cadet Headset –girls’

this headset compatible with satellite phones and cellphones, but its “true stereo” input jack makes it easy for the user to listen to music or watch movies using various media including iPods, iPads, and other tablets. Foam ear seals and a foam headpad ensure comfort on long flights. –– Provides 24 dB passive noise reduction –– Equipped with an electret noise canceling mic and half metal/half flex microphone boom –– Provides mono/stereo capability and is compatible with 3.5 mm (4 conductor) and 2.5 mm inputs –– Dual volume control on each ear cup –– Comes with a padded headset bag –– Construct with black and gray earcups with chrome hardware –– Weight: 15.9 oz

PA-1181T PASSIVE HEADSET PILOT USA

PA-1160 PASSIVE HEADSET PILOT USA

EDMO#

MFR#

DESCRIPTION

PA-1160AI

PA-1160AI/ PA-1160 with straight plug; compatible with STRAIGHT Icom A2, A3, A4, A6, A20, A21, A12 PA-1160AIR PA-1160AI/RIGHT PA-1160 with right angle plug; compatible with ICOM A6, A14, and A24

PA-1169T PASSIVE HEADSET PILOT USA

EDMO# PA-1169T MFR# PA-1169T The PA-1169T Passive Headset is an entry level headset at an excellent price point that doesn’t scrimp on comfort and quality. The wearer can expect crystal clear communications with an electret noise canceling microphone on a half metal/half flex adjustable microphone boom while mono/stereo capabilities and dual volume controls for each ear cup provide versatility. Not only is

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

11

The PA-1160 Passive Headsets are designed to be directly plugged into various Icom aviation transceivers— thereby removing the need for any adapters. The PA-1160AI provides 24 dB of passive noise reduction; the PA1160AIR provides 23 dB –– The PA-1160AI has a straight plug and is intended for use with the ICOM A2, A3, A4, A20, A21, and A22 aviation transceivers that have the input on the top of the radio –– The PA-1160AIR has a right angle plug and is intended for use with the Icom A6, A14, and A24 and other models that have the input on the side of the radio –– Includes an installed inline Press-ToTalk (PTT) switch on the comm cord –– Weight: 15.9 oz

EDMO# PA-1181T MFR# PA-1181T The PA-1181T Passive Headset offers up a sleek design kitted out with solid technology and comfort-enhancing touches. The wearer can be assured of crystal-clear communications with 24 dB of passive noise reduction and a noise canceling electret microphone while the construction, embellished with chrome and textured black ear cups, provides a sophisticated, professional look. A full, flexible microphone boom allows for precise positioning of the mic while a built-in PTT button on the right ear cup ensures easy access to that function if the portable PTT or yoke-mounted PTT fail. Comfort and common sense come together in this headset’s cushioning design which includes soft silicone gel ear seals and a pillow top head pad that can be washed when needed. –– Provides 24 dB of passive noise reduction –– Designed with a full flex microphone boom that allows the user to position the noise canceling electret microphone –– Comfort and convenience in one: the pillow top head pad is removable and washable; silicone gel ear seals provide cushioning and a good seal around the user’s ears –– Built-in PTT button installed on the right ear cup is an ideal stand-in if the portable PTT fails or if the yoke-mounted PTT is inoperative –– Compatible with cell phones and satellite phones and includes a “true stereo” input jack so that the user can listen to or watch media on cellphones and tablets –– Provides mono/stereo capability and is compatible with 3.5 mm (4 conductor) and 2.5 mm inputs –– Comes with a soft, padded headset case –– Weight: 15.9 oz

233

Headsets, Intercoms & Accessories Passive Headsets

PILOT USA HEADSET ACCESSORIES

EDMO# PA-20 MFR# PA-20 Cloth ear seal covers prolong the life of headset ear seals while also adding an additional layer of comfort for the wearer. These covers are constructed with washable 100% cotton, that is designed to absorb moisture in hot, humid environments. Sold in pairs.

adjustable headband that accommodates eyeglasses and eliminates hot spots. –– The ASA Air Classics Headset provides excellent sound quality with high fidelity speakers and a noise-canceling electret microphone that reduces background noise to provide the clearest-possible voice transmission. –– Supplies a noise reduction rating of 23 dB –– Provides passive noise attenuation with earcups padded with high-density acoustic foam –– The wearer can dial in the fit with the adjustable headband that eliminates hotspots and accommodates eyeglasses while quality foam ear seals enhance the overall fit –– Includes high fidelity speakers and a noise-canceling electret mic that reduces background noise for clear voice transmission –– Flex microphone boom allows the user to position the mic as needed –– Durably constructed with corrosion-resistant gold-plated microphone and headphone plugs and high-grade, multi-strand wire throughout –– Mono/stereo capability –– Includes large, dual controls for adjusting the volume on each ear –– Weight: 1.95 lb

PILOT USA MICROPHONE WINDSCREENS

ASA GEL HEADSET EAR SEALS

GEL EAR SEALS Silicone gel ear seals for most conventional headset styles. Easy to install—simple slideon design.

EDMO#

MFR#

FL-ES-15 FL-ES-HEL

PA-22G PA-22GL

DESCRIPTION gel ear seals gel ear seals – large size

CLOTH EAR SEAL COVERS

PA-10

PA-10L

PA-11

11

Windscreens for Pilot USA microphones protect headset microphones while improving sound quality by reducing interference from wind and other background noises. EDMO#

MFR#

PA-10

PA-10

PA-10L

PA-10L

PA-11

PA-11

DESCRIPTION/USE: small foam windscreen for electret mic; fits PA-5, PA-7, PA-9 or equivalent large foam windscreen for dynamic mic; fits M-101, M-87 or equivalent leather mic cover and foam windscreen for electret mic; fits PA-5, PA-7, PA-9 or equivalent

EDMO# HS-1-GEL MFR# HS-1-GEL Replacement gel ear seals from ASA provide increased comfort, improved noise protection, and sharper communications. The gel material used in ASA’s gel ear seals allow the seal to flow naturally around the wearer’s ear to distribute pressure evenly around the head and facial contours.

ASA MICROPHONE MUFF

EDMO# HS-1-MUFF MFR# HS-1-MUFF The ASA microphone muff is made of acoustically transparent Sonic Foam™ and protects headset mics from moisture, dirt and debris while reducing excess wind and background noise. Designed for comfort and years of use, this microphone muff is hypoallergenic and washable. Secures into place with an included O-ring.

AIRCLASSICS HS-1A PASSIVE HEADSET ASA

EDMO# HS-1A MFR# HS-1A The AirClassics HS-1A Headset has been a favorite among pilots for over a decade—it offers quality components, a comfortable yet sleek design, and solid audio performance. This headset’s passive noise reduction rating of 23 dB is made possible by high-density acoustic foam-padded ear cups that provide the best possible passive noise attenuation. The HS-1A’s high fidelity speakers provide clear sound and the noise-canceling electret mic ensures crisp voice transmission. Each earcup’s volume can be individually adjusted using the large, dual controls. The HS-1A doesn’t lack in the comfort department, either; it is designed with quality foam ear seals and a padded,

234

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Ground Support Communication Headsets

GROUND SUPPORT COMMUNICATION HEADSETS MODEL H331X HEADSETS DAVID CLARK COMPANY INC Model H331X headsets are muff microphone style headsets that are ideal for maintenance and ramp operations. This series of noise-canceling headsets provide a certified noise reduction rating of 26 dB. –– All headsets in this series are equipped with an M-1/ DC noise-canceling amplified dynamic mic with varying configurations (see table below) H3310 –– Supplies a comfortable fit with a soft foam head pad and foam ear seals –– Designed with a corrosion-proof, chrome plated headband and stirrup assembly –– Available with 30-inch or 25-foot cords (see table for extension cord compatibility) EDMO# H3310

MFR# 12506G-05

12515G-12

H3313

12515G-14

30-inch straight cord with PJ-051 plug; mates C31-XX series extension cords 25-foot straight cord eliminates the need for extension cords 30-inch straight cord with PJ-051 plug mates with C31-XX series extension cords

MICROPHONE snap-fastened nylon straps secure microphone muff to mouth microphone muff hangs freely, ready for periodic use microphone muff hangs freely and ready for periodic use

EAR SEALS 18316G-02

18316G-02

foam-filled ear seals for use in David Clark ENC model headsets—sold in pairs and compatible with: H3530, H3531, H3335, H3312, and H3313

EXTENSION CORDS C31-12 C31-25 C31-26 C31-50 C31-100

22397G-03 18874G-01 18874G-01 22397G-05 22397G-06 18900G-42

EDMO# H3335 MFR# 12304G-04 The Model H3335 headset is a noise-canceling headset with a certified noise reduction rating of 24 dB. This headset is ideal for use in ramp communications and other ground support applications. –– Provides certified noise reduction at 24 dB –– Incorporates an M-1/DC noise-canceling amplified dynamic microphone –– Microphone can be moved to either the right or left side using the hinged wire boom –– Provides hands-free communication with a microphone on/off switch on the ear dome –– Supplies a comfortable fit with a soft foam head pad and foam ear seals –– Designed with a corrosion-proof, chrome plated headband and stirrup assembly –– 26 ft coil cord mates with C31-12, C31-25, C31-50, and C31-100 straight extension cords EDMO# H3335

MFR#

CORD

MICROPHONE

12304G-04

30-inch straight cord with snap-fastened nylon PJ-051 plug; mates C31- straps secure microXX series extension cords phone muff to mouth

18316G-02

foam-filled ear seals for use in David Clark ENC model headsets—sold in pairs and compatible with: H3530, H3531, H3335, H3312, and H3313

EAR SEALS 18316G-02

EXTENSION CORDS C31-26 C31-12 C31-25 C31-50 C31-100

18874G-01 22397G-03 18874G-01 22397G-05 22397G-06

26 ft coil cord 12 ft straight cord 25 ft straight cord 50 ft straight cord 100 ft straight cord

CONNECTOR KIT 18900G-42

18900G-42

connector kit PJ-051 for use with: H3335, H3312, H3313, H3310

12 ft straight cord 25 ft straight cord 26 ft coil cord 50 ft straight cord 100 ft straight cord

Looking for helicopter helmets and accessories? See page 246.

CONNECTOR KIT 18900G-42

DAVID CLARK COMPANY INC

11

H3312

CORD

MODEL H3335 HEADSET

connector kit PJ-051 for use with: H3335, H3312, H3313, H3310

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

235

Headsets, Intercoms & Accessories Headphones

HEADPHONES AIRMAN 760 HEADPHONES TELEX COMMUNICATIONS INC

EDMO# 64400-200 MFR# 64400-200 One of the most popular headsets in the world, the Airman 7XX family of headsets provide lightweight comfort and adaptability and weigh in at just over 3 ounces. The fit can be customized to the wearer—the earphone housings are mounted on stainless steel sliders that allow over two inches of adjustment. There are two versions of the Airman headset available: the Airman 760, consisting of headphones only and the Airman 750 which includes an amplified, noise-canceling electret mic (see page 228 for the Airman 750). –– Open-air style earphones provide comfort during long flights and are designed for adaptable usage—the earphone housings are mounted on stainless steel sliders that provide over two inches of fit adjustment –– Comes with removable ear cushions designed for quick field replacement

11

weight: approvals:

3.2 oz 64400-200: FAA TSO C57a

MODEL 10A HEARING PROTECTOR DAVID CLARK COMPANY INC

EDMO# 12451G-01 MFR# 12451G-01 One of David Clark’s most popular hearing protection models, the Model 10A over-the-head-style hearing protection headphones provide a certified noise-reduction rating of 23 dB. –– Equipped with wide, foam-filled ear seals and low-profile ear cups –– An adjustable head band with a plush foam headpad provides a comfortable fit –– Constructed with high quality chrome-plated hardware

EDMO: BIG SELECTION, PRODUCTS YOU KNOW & NAMES THAT YOU TRUST. As a class-leading aviation distributor, EDMO keeps pace with the trends of the aerospace industry. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we will have what you’re looking for. Give us a call at 1.800.235.3300 or visit edmo.com for parts and pricing.

Not finding what you need? EDMO supplies a wide variety of headsets, headphones, and their accessories. If you don’t see what you need here, check out our website at edmo.com. It’s likely we have what you need on hand and if we don’t, we can almost always get it for you. Give us a call at 1.800.235.3300 for parts and pricing.

236

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Headset Adapters & Interfaces

HEADSET ADAPTERS & INTERFACES HEADSET EXTENSION ADAPTERS EDMO#

MFR#

DESCRIPTION

JB-02

EJB-02

Heavy duty headset extension allows a 0.25 inch phone jack to be extended by 5 feet. Excellent for customizing an aircraft with rear passenger headphone (listen only) capabilities.

JB-03

EJB-03

Heavy duty extension cable allows a general aviation headset using a PJ-068 and PJ-055B or equivalent plugs to be extended 5 feet. Ideal when position of aircraft radio or intercom does not allow headset cords to reach adequately.

JB-03 10FT JB-03 25FT JB-03 50FT JB-03 100F

JB-03 JB-03-25 JB-03-50 JB-03 100FT

Same as JB-03 with 10 foot extension Same as JB-03 with 25 foot extension. Same as JB-03 with 50 foot extension Same as JB-03 with 100 foot extension

JB-04

EJB-04

Heavy duty extension allows a 0.206-inch microphone jack to be extended by 5 feet. Excellent for customizing an aircraft with rear passenger microphone jacks.

JB-13

EJB-13

Helicopter headset extension for headset using U-174/U, U-93A/U or equivalent plugs; 5 feet in length.

JB-13 1FT JB-13SHORT

JB-13-S JB-13SHORT

Same as JB-13 but 1 foot length. Same as JB-13 but 2 foot length.

Y ADAPTERS EDMO#

MFR#

DESCRIPTION

EJB-01

Dual headphone Y adapter heavy duty adapter converts one 0.25 phone jack into two. Designed for those who want to connect two headphones into one A/C radio headphone jack; can be used with stereo or mono headphones and jack. 2 feet in length.

JB-05

EJB-05

Double headset Y adapter converts one set of A/C radio headset jacks (0.026 and 0.25 inch) into two and can be used with any general aviation headset using PJ-068 and PJ055B or equivalent plugs. Adds an additional headset position to the aircraft without the high cost of installing additional panel jacks or purchasing a new intercom system. 2 feet in length

JB-06

JB-06

Dual microphone Y adapter converts one 0.206-inch aircraft radio microphone jack into two. Ideal for those who want to add another push-to-talk position to the radio; 2 feet in length.

JB-12

JB-30

11

JB-01

Y adapter converts a headset with 0.206 inch mic and 0.25 inch phone plugs into a one 0.25 inch plug headset. 9 inches in length.

EJB-30

Y headset adapter converts a headset with a single 0.206 plug into one with two 0.206 inch mic and 0.25 inch phone plugs. 9 inches in length.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

237

Headsets, Intercoms & Accessories Headset Adapters & Interfaces HELICOPTER ADAPTERS EDMO#

MFR#

DESCRIPTION

JB-07

JB-07

Standard to helicopter adapter converts one 0.206-inch aircraft radio microphone jack into two. Makes it possible to add another push-to-talk position to the radio. 9 inches in length.

JB-08

JB-08

Helicopter to standard adapter cable converts general aviation plugs PJ-068 and PJ-055B or equivalent to U-174/U or equivalent plug. Allows standard headset to be used in a helicopter. 9 inches in length.

JB-15

EJB-15

Dual helicopter headset adapter converts a single helicopter radio or intercom jack (TJ-120, TJT-120, TJT-102) into two. 1 foot in length; adds additional space to a headset without costly installation.

MILITARY ADAPTERS

11

EDMO#

MFR#

DESCRIPTION

JB-17

JB-17

Headset adapter cable converts U-174/U or U-93A/U to U-75/U. 9 inches in length.

JB-19

JB-19

Headset adapter cable accepts standard aircraft headphone and microphone plugs and converts to a U-175/U plug.

JB-20

JB-20

Headset adapter cable that allows a headset with a U-75/U plug to be converted to a standard aviation mic and phone plugs. 9 inches in length.

IMPEDANCE CONVERTER EDMO#

238

MFR#

DESCRIPTION

JB-23

EJB-23

Low to high impedance adapter converts a low impedance mic and phone military headset into higher impedance for use in general aviation aircraft. It also converts U-174/U plug on the military headset into a 0.206 inch and 0.25 inch plugs used in general aviation. 3 feet in length.

JB-23H

EJB-23H

Same as JB-23 but for helicopter use.

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Headset Adapters & Interfaces

MULTI-CONDUCTOR CABLE EDMO#

MFR#

DESCRIPTION

JB-21-10

JB-21-10

Retractable, 10 conductor color-coded conductors, shielded. 6 feet extended, 12 inches retracted.

JB-21-3

EJB-21-3

Retractable, 3 conductor color-coded conductors, shielded. 6 feet extended, 12 inches retracted.

JB-21-5

EJB-21-5

Retractable, 5 conductor color-coded conductors, shielded. 6 feet extended, 12 inches retracted.

JB-21-6

EJB-21-6

Retractable, 6 conductor color-coded conductors, 28 AWG shielded. 6 feet extended, 12 inches retracted.

JB-21-8

EJB-21-8

Retractable, 8 conductor color-coded conductors, shielded. 6 feet extended, 12 inches retracted.

SPECIALTY ADAPTERS EDMO#

MFR#

DESCRIPTION

EJB-22

Video recorder adapter provides an interface between a video recorder and the aircraft intercom system. Records sounds transmitted through the mic system. 5 feet in length.

JB-26-5

JB-26

iPOD/MP3 to intercom adapter connects an MP3 player or iPod with a 3.5 mm plug directly into an intercom system with a 0.206-inch plug. 5 feet in length.

JB-26-11

JB-26L

Same as JB-26-5, but 11 feet in length.

11

JB-22

AIRBUS ADAPTERS EDMO#

MFR#

DESCRIPTION

JB-44

JB-44

General aviation to Airbus adapter reduces a single 0.25-inch headset plug to a single 0.206 headset plug. 9 inches in length.

JB-45

JB-45

Airbus to general aviation adapter converts Airbus headset to general aviation intercom communication system. Reduces a single 0.206-inch mic plug to a 3.5 mm mini plug. 9 inches in length.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

239

Headsets, Intercoms & Accessories Headset Adapters & Interfaces PILOT USA HEADSET ADAPTERS PILOT USA Pilot USA provides multiple adapters for use in helicopters and fixed wing aircraft. EDMO#

MFR#

ADAPTS:

11

FIXED WING

240

PA-72S

PA-72S

Dual headset adapter converts one set of radio or intercom mic and phone jacks into two sets, for monaural or stereo headsets; 6-foot straight cable

PA-73

PA73S

Dual headphone Y-adapter for monaural or stereo headsets; converts one set of radio or intercom headphone jack into two sets

PA-84

PA-84

US NATO to Europe adapter converts 4 conductor US NATO plug to a 4 conductor Europe NATO plug; female socket: U-92A/U, male plug: ASTL 5935-99-946-6652

PA-77S

PA-77S

Headset extension cable for monaural or stereo headsets allows general aviation headset to be extended 5 ft, 10 ft or 25 ft

PA-78

PA-78

Monaural replacement headset cable, 5 foot, with PJ-055 and PJ-068 plugs, comes with strain release and crimp ring

PA-79

PA-79

Replacement monaural/stereo headset cable, 5 foot with mono/stereo switch and strain release and crimp ring

PA-86A

PA-86A

Amplified cell phone adapter allows the use of a cell phone or satellite phone with a GA plug headset; also works with CD, MP3, iPods and other music devices; true stereo sound (when available) requires a 9V battery (not included)

PA-88

PA-88

Amplified impedance adapter converts a low impedance military headset into high impedance for use in general aviation aircraft; also converts the U-174/U plug on the military headset into 0.206 in and 0.25 in plugs used in general aviation

PA-89

PA-89B

Bose A20® 6 pin LEMO to GA adapter converts a Bose A20® panel mount headset to standard dual plugs for GA use

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Headset Adapters & Interfaces

EDMO#

MFR#

ADAPTS:

PA-92

PA-92

Single plug headset to GA adapter converts a headset with a single 0.25 in plug into a dual plugs (0.206 mic and 0.25 in phone)

PA-93B

PA-93B

GA headset to Bose (6 pin LEMO) adapter converts a dual plug GA headset to a single Bose (6 pin LEMO connector)

PA-97

PA-97

Dual plug GA headset to Airbus adapter converts a dual plug GA headset to the Airbus radio system; accepts standard 0.25 in (PJ-055) and 0.206 in (PJ-068) plugs; adapts to XLR-5 PIN/DIN Airbus® type male—for use in Airbus® 318, 319, 320, 321, 330, 340

PA-72H

PA-72H

Dual headset adapter allows two helicopter/military headsets to be used in one headset jack; can be used with any headset using U-174/U, TP-120, U-93A/U or an equivalent single helicopter/military plug

PA-75

PA-75

Heli to GA adapter converts a U-174/U or U-93A/U helicopter plug to general aviation plugs PJ-068 and PJ-055B or equivalent (does not convert impedance)

PA-76

PA-76

GA to heli adapter converts general aviation plugs PJ-068 and PJ-055B or equivalent to helicopter U174/U plug or equivalent (does not convert impedance)

PA-86AH

PA-86AH

Amplified cell phone adapter allows the use of a cell phone or satellite phone with a helicopter single plug headset; also works with CD, MP3, iPods and other music devices, requires a 9V battery (not included)

PA-77H

PA-77H

Helicopter extension cable, 5 foot, with female U-92A/U jack on one end and a male TP120 (U-174/U) plug on the opposite end; extends any helicopter or military headset that uses a single U-174/U or equivalent plug

PA-88H

PA-88H

Amplified impedance adapter converts a low impedance military headset into high impedance for use in civilian helicopter aircraft; U92A jack converts military headset to single plug U174/U

HELICOPTER

1.800.235.3300 | edmo.com

11

EDMO DISTRIBUTORS

241

Headsets, Intercoms & Accessories Headset Adapters & Interfaces

EDMO#

MFR#

PA-93BH

PA-93BH

ADAPTS: Helicopter headset to Bose Plug headset adapter converts helicopter U-92A/U jack to single Bose connector

FARO AVIATION HEADSET ADAPTERS FARO AVIATION LLC EDMO#

MFR#

ADAPTS:

FIXED WING FAHLI20

FAHLI20

GA to military: converts a general aviation 0.206 inch and 0.25 inch plugs to a military headset U-174/U plug; includes two female GA jacks: 0.250-inch headphone (PJ-055) and 0.206-inch microphone (PJ-068), and one military plug (U-174/U); requires a 9-volt battery Military to GA: converts a military headset U-174/U plug to general aviation 0.206 and 0.25 inch plugs

FALHI20

FALHI20

FRYC01

FRYC01

Y adapter: allows pilots to add an additional headset position to an aircraft; converts A/C radio headset jacks (0.206 and 0.250 inch) into two and can be used with any general aviation headset that uses PJ-068 or PJ-055B (or equivalent) plugs.

FAROHELIAD

Helicopter adapter: converts general aviation plugs into a single helicopter standard plug (U-174/U, U-93A/U or equivalent); required for Faro® G2 aviation headset if used in helicopters

HELICOPTER

11

HELI-AD

Not finding what you need? If you’re looking for a specific adapter that isn't in our catalog, be sure to visit us online at edmo.com or give us a call. If you don’t see what you need here, it’s likely we have it, or we can order it for you.

BLULINK™ INTERFACE ADAPTER PILOT USA BluLink™ technology makes it possible to wirelessly use a Bluetooth cell phone or music source in the cockpit in conjunction with an aviation headset. An existing GA or helicopter headset can be paired up with BluLink™ to wirelessly connect and listen to music via a cell phone or music player—BluLink™ even allows the user to wirelessly control the music using the buttons on the device to select songs, pause or play, and control volume. (Please note, devices without Bluetooth will require PA-86BLU/G a Bluetooth transmitter. Part # PA-BLU/I, Bluetooth dongle is required for iPod compatibility). –– BluLink™ wirelessly controls music from a Bluetooth music-streaming phone or music player –– If a call comes in while music is playing, the music will pause so that the wearer can answer the call by pressing the “Answer Call” button; after the call is ended, the music will begin to play automatically

242

1.800.235.3300 | edmo.com

–– Bluetooth devices need to be “paired” with each other beforehand; once Bluetooth devices are paired, there is usually no need for pairing again –– Before BluLink can be used to make a call or to listen to music, it must be paired with a Bluetooth-enabled phone and/or music device –– The battery compartment contains two switches: mono/stereo switch for Mono type intercom and a switch for auto mute; BluLink™ will mute the music source when anyone, including ATC, speaks over the intercom –– Helps to filter out RF noise

weight: dimensions:

EDMO# PA-86BLU/G PA-86BLU/H

4.2 oz (including batteries) 5.5 × 1 × 1.5 in

MFR# PA-86BLU/GA PA-86BLU/H

ADAPTS: general aviation version helicopter version

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Headset PTT Switches

GOPRO HERO3, 3+ ADAPTER

HEADSET ADAPTER LO TO HI Z

PILOT USA

COBHAM

The GoPro Hero3 recorder adapter for helicopter headsets allows users to record all transmission form the aircraft intercom system to their external GoPro Hero 3 video camera. This is an excellent way to produce aerial videos without having to deal with or edit out excess cabin noise—the adapter records all audio transmitted through the intercom system, including in-cabin audio and ATC transmissions. –– Design for the GoPro Hero3 with a mini USB input instead of a 3.5 mm jack

Military headset adapter consisting of 5 W dynamic military mic to general aviation 150W amplified dynamic mic adapter, with an 8 W to 600 W transformer for phones matching. These small, remote mounted metal units are equipped with D-sub connectors and are designed to operate from standard mic bias, supplied by the aircraft radio and intercom system.

EDMO#

MFR#

PA-80H-H

PA-80H/HERO3

PA-80S-H

PA-80S/HERO3

PA-80H-H

FOR USE WITH:

EDMO# AA39-187 AA39-287

MFR# AA39-187 AA39-287

AA39-187

FOR USE WITH one headset two headsets

Helicopter (single U-174/U plug) headsets and helmets GA (dual plug) headsets and helmets

ASA HELICOPTER ADAPTER ASA

DIGITAL AUDIO RECORDER ADAPTER PILOT USA

EDMO#

MFR#

FOR USE WITH:

FOR MOST DIGITAL RECORDERS PA-80S/D

PA-80S/DIGITAL

Devices that use a 3.5 mm stereo external mic input such as the GoPro HERO2, Drift HD or other handheld video camera or personal audio recorder

FOR SMARTPHONES & TABLETS PA-80S-I

PA-80S/iPHONE

PA-80H-I

PA-80H/iPhone

HEADSET PTT SWITCHES

11

The Digital Audio Recorder Adapter for GA headsets allows users to turn their digital recording device including tablets, and other smart devices into a cockpit voice recorder. This adapter works with any device equipped with a 3.5 mm, 4 conductor jack including a GoPro HERO2, Drift HD, PA-80S-I handheld video camera and other personal audio recorder (a version for smartphones provides compatibility with smart devices including iPhones, iPads, Android devices, Windows phones, and more). The user’s headset plugs into the adapter and the 3.5 mm plug is connected to the smart device’s headset jack. Once connected, the user can then record all audio heard through the aviation headset as well as all transmissions PA-80H-I on the intercom system including in-cabin and ATC transmissions. –– The adapter includes a 3.5 mm, 4 conductor plug –– For use with general aviation (dual plug) headsets and helmets –– Ideal for students and CFIs reviewing radio communication skills post-flight

EDMO# HS-HELADPT MFR# HS-HELADPT This rugged adapter/extension makes it possible to convert a general aviation fixed-wing headset for use in a helicopter. –– Compatible with all general aviation headsets –– Features shielded tensile strength wire and a polyurethane casing

DAVID CLARK PTT DAVID CLARK COMPANY INC

EDMO# C10-15 MFR# 18216G-01 Portable push-to-talk (PTT) switch with double-pole switch contacts provide positive keying with no dead spots. –– Constructed with durable, high-impact ABS plastic housing –– Highest grade Velcro hook and pike yoke strap for tight, secured mounting –– Coil cord (5 ft extended) shielded for positive protection from radio frequency and Electro-Magnetic interference

GA (dual plug) headsets; 3.5mm, 4 conductor plug Helicopter (single plug) headsets; 3.5mm, 4 conductor plug

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

243

Headsets, Intercoms & Accessories Handheld Microphones PUSH TO TALK SWITCH

903E ELECTRET AVIATION MICROPHONE

ASA

TELEX COMMUNICATIONS

EDMO# PTT-1A MFR# PTT-1A The ASA push-to-talk switch mounts to the yoke with a Velcro strap to provide hands-free communication. With a press of the thumb, the pilot can communicate with ATC, Unicom, or other aircraft without having to pick up a microphone. –– Low profile ergonomic button –– Heavy duty gold-plated plugs and jack –– Durable shield-coiled cord –– Hook and loop mounting strap –– Plugs into aircraft radio or intercom –– Molded strain relief

EDMO# 903-1341 MFR# 903-1341 The model 903E condenser handheld microphone is ideal for high noise environments such as aircraft cockpits, passenger cabins, control towers, or terminal areas. EMI, RFI, and magnetic signals are greatly reduced by the electret element, for the clearest possible communications. This mic is recommended for advanced technology air transports using flight instrumentation systems (glass cockpits). –– EMI and RFI protected for resistance to aircraft generated magnetic fields –– Tailored voice response for high articulation per RTCA/DO-170 –– Different connectors available –– Coiled cord –– Hanger bracket included

FARO PUSH TO TALK SWITCH (PTT) FARO AVIATION LLC

11

EDMO# PTT MFR# FARO-PTT The FARO® Push-to-Talk (PTT) switch mounts to the yoke with a strap and allows pilots to communicate with ATC, Unicom, and other aircraft with the push of a button. This push-to-talk switch is excellent for dual flights where co-pilots or instructors assist with communications.

EDMO# 903-1341 903-1342

TELEX COMMUNICATIONS INC

602T DYNAMIC AVIATION MICROPHONE TELEX COMMUNICATIONS

EDMO# 602-3374 602-3375 602-3376

244

MFR# 602-3374 602-3375 602-3376

DESCRIPTION 903E electret mic/PJ-068 plug 903E electret mic/XLR-4-12-C

38T ELECTRET MICROPHONE

HANDHELD MICROPHONES The 602T handheld dynamic microphone is a transistorized, pressure-gradient microphone that uses three sound entrances to reduce interfacing ambient noise. As such, this mic is excellent at discriminating between near and distant sounds for maximum ambient noise rejection. The 602T’s single stage transistor amplifier is stabilized and designed to operate uniformly from +55°C down to – 20°C.

MFR# 903-1341 903-1342

EDMO# 63999-000 MFR# 63999-000 The 38T electret microphone is a noise-canceling, hand-held aviation microphone consisting of an electret microphone element, a microphone amplifier, and a push-to-talk switch. The 38T cancels noises coming from more than ½-inch away and is resistant to interference, hum, and squealing produced by 400 Hz power systems. This mic is also equipped with electronic switching that eliminates the switch popping that often occurs when using other microphones. Gain can be adjusted as needed; adjustment by a qualified avionics technician is recommended.

66T DYNAMIC HAND MICROPHONE TELEX COMMUNICATIONS INC

602-3374

DESCRIPTION 602T dynamic mic with slide hanger 602T dynamic mic with button hanger 602T dynamic mic with loop hanger

1.800.235.3300 | edmo.com

The 66T is a noise-canceling handheld aviation microphone consisting of a dynamic microphone cartridge, transistor amplifier, and push-to-talk switch. The 66T provides excellent speech intelligibility with the ability to discriminate against all sounds coming from more than ½-inch away. Microphone gain can be adjusted through an opening in the back of the microphone (it is recommended that a qualified avionics technician make all adjustments). The microphone is supplied with an adhesive label that can be placed over the opening to prevent tampering. –– Two versions available: the 66T base model and the 66TRA which is supplied with a molded right-angle plug

60837-001

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Microphone Lights

EDMO# 60837-001 60837-008

MFR# 60837-001 60837-008

DESCRIPTION 66T dynamic hand microphone 66TRA dynamic hand microphone with right angle plug

MICROPHONE LIGHTS MIKE LITES SEITZ SCIENTIFIC INDUSTRIES

100TRA DYNAMIC MICROPHONE TELEX COMMUNICATIONS INC The 100TRA is a noise-canceling aviation microphone consisting of a dynamic microphone, amplifier, and push-to-talk switch. The 100TRA gain trimmer, accessed by removing the back cover of the microphone, provides a range of gain adjustment (it is recommended that adjustments be made by a certified technician). A noise-canceling duct on the back of the microphone must remain unobstructed during use. –– Supplied with a hanger bracket and mounting hardware EDMO# 62800-001

MFR# 62800-001

DESCRIPTION 100TRA dynamic microphone

ACCESSORIES 62767-000 62802-000

62767000 62802-000

cord unit for 100TRA hanger bracket for 100TRA/500T microphones

Well known for their application by the US military, Mike Lites (also known as lip lites) are a necessity for night use in an aviation environment. Mike Lites are compatible with all night vision goggles and devices and can be mounted on helmets or headsets, on an M-87, M-162 or similar microphones. A pushbutton ON/OFF switch on the side of the light can be actuated by the wearer’s lip or tongue; a slight push provides momentary light while an extended push places the switch in the “ON” position until a second extended push is used to turn the light off. Uses two AA batteries (not included). EDMO# ML-8 ML-11 ML-18 ML-21 ML25

MFR# ML8 ML11 ML18 ML21

DESCRIPTION: NVIS green A LEDs (3 ea.) infrared (1 ea.) NVIS green A LEDs (2 ea.) filtered NVIS white LEDs bright NVIS green A Les (3 ea.) MAXILLO, filter NVIS white (3 ea.) filtered NVIS white (3 ea.)

More versions available, visit edmo.com for details.

500T ELECTRET MICROPHONE TELEX COMMUNICATIONS INC

EDMO# 63333-000

MFR# 63333-000

11

The 500T noise-canceling aviation microphone consists of an electret microphone, amplifier, and push-totalk switch. The 500T is resistant to the interference, hum, and squealing produced by 400 Hz power systems. Gain can be adjusted using the microphone gain trimmer that is accessible through the side of the microphone housing (it is recommended that adjustments be made by a certified technician). A noise cancellation duct on the back of the microphone should not be obstructed during use. –– Supplied with a hanger bracket and mounting hardware DESCRIPTION 500T electret microphone

ACCESSORIES 62802-000

62802-000

hanger bracket for 100TRA/500T microphones

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

245

Headsets, Intercoms & Accessories Helicopter Helmets

HELICOPTER HELMETS PHOENIX HELICOPTER HELMET

11

PARACLETE AVIATION LIFE SUPPORT The Phoenix helicopter helmet is intended for use by civilian pilots flying rotary wing aircraft. Comfort and safety are at the forefront with the Phoenix Flight helmet which is comfortable, lightweight, and adjustable. The Phoenix is constructed with a lightweight Kevlar® and fiberglass composite shell and a carbon fiber dual visor cover while premium ear seals and a Nephos™ comfort liner and Paraclete ShockLiner ensure a comfortable fit. (See table below for liner sizing for the best possible fit.) –– Lightweight carbon fiber dual composite shell with carbon fiber dual visor cover –– Clear outer and tinted inner visor lenses –– Customizable Nephos™ Comfort Liner with X-Static® Performance Fabric –– Paraclete EPS ShockLiner –– ANVIS NVG mounting plate –– Legacy retention assembly and Double D-Ring and snap lock chin strap –– Standard ear seals and crushable ear cups –– 300 ohm speakers –– Braided coiled or straight 24-gauge communications cable –– Twin-rail ball joint microphone boom –– M-7 electret microphone

ASPIDA™ HELICOPTER HELMET PARACLETE AVIATION LIFE SUPPORT The Aspida™ Helicopter Helmet provides an incredible fit with its proprietary Kairos™ Retention Assembly and an easily adjustable BOA® Closure System that allows the wearer to dial in the fit. The chinstrap includes a Fidlock® fastener that can be operated with one hand, while an automatic closing mechanism makes last-minute adjustments quick and precise. Premium X-Static® performance fabric used in the Nephos™ Comfort Liner regulates temperature, eliminates odor and static, and is anti-microbial. (See table below for liner sizing for the best possible fit.) –– Lightweight carbon fiber dual composite shell with carbon fiber dual visor cover –– Clear outer and tinted inner visor lenses –– Customizable Nephos™ Comfort Liner with X-Static® Performance Fabric on the nape pad and TruC™ ear seal lining –– Paraclete EPS ShockLiner –– ANVIS NVG mounting plate –– Kairos™ Retention and Nape Assembly with Boa® Closure System

246

1.800.235.3300 | edmo.com

–– –– –– –– ––

and Fidlock® Buckle TruC™ Premium Ear Seals and crushable earcups 300 ohm speakers Coiled or straight 24 AWG communications cable Twin rail ball joint microphone boom M-7 electret microphone

weight:

dimensions: dual visor lens: chin strap: sound attenuation:

Phoenix: 3.27 lb Aspida™: 3 lb weight varies +/-0.5 lb (includes comm equip. and paint) 12 × 12 × 12 in UV protection coating outer clear and inner tinted (neutral) impact resistant Lexan polycarbonate Phoenix: exceeds 300 lb pull strength Aspida™: exceeds 440 lb pull strength 20 dB at 1,000 Hz 38 dB at 4,000 Hz

NEPHOS™ COMFORT LINER The Nephos™ Comfort Liner is constructed with X-Static® performance fabric, an antimicrobial fabric that regulates temperature while eliminating odor and static. Use the sizing table below to determine the correct size of Nephos™ Comfort Liner for a customized, comfortable fit. NEPHOS™ COMFORT LINER & HELMET SIZING CHART SIZE

HEAD CIRCUMFERENCE

SHELL SIZE COMFORT LINER

small regular X large XX large

less than 21-3/8 in 21-3/8 to 22-3/8 in 22-3/8 to 24-1/4 in more than 24-1/4 in

regular regular X large X large

EDMO#

MFR#

¾ or 3/8 in 3/8 in, ½ in, or 5/8 in 3/8 in, ½ in, or 5/8 in ¼ in

DESCRIPTION

PHOENIX & ASPIDA HELICOPTER HELMET OPTIONS To see all available part numbers for Phoenix Flight Helmet, visit us online at edmo.com or call our friendly sales staff at 1.800.235.3300 to discuss your options. The table below describes the feature combinations available for the Phoenix Flight Helmet. NVG: colors: visor cover: visor: cord:

EDMO#

NVG versions include an NVG quick disconnect gloss white, gloss blue, gloss black, gloss red, OD green, Coast Guard metallic blue, metallic titanium and metallic silver can be painted to match the helmet shell Lexan® polycarbonate clear outer visor and tinted (neutral) inner visor straight or coil cord

MFR#

DESCRIPTION

PHOENIX HELICOPTER HELMET ACCESSORIES PAC-001

PAC-001

PAC-001-S PAC-007

PAC-001-S PAC-007

3 ft coiled down lead for Phoenix helmets straight down lead for Phoenix helmets microphone cable for Phoenix helmets 13-14

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Helicopter Helmets

EDMO# PAH-004R

MFR#

DESCRIPTION

PAH-004R

size Regular E.A. liner for Phoenix helmets PAH-004XL PAH-004XL size X-large E.A. liner for Phoenix helmets PAH-004XXL PAH-004XXL size XX-large E.A. liner for Phoenix helmets PAHHHK01/R PAH-HHK01/R size Regular Phoenix Helmet Shell PAHHHK01XL PAH-HHK01/XL size X-Large Phoenix Helmet Shell 001CFB PAV-001CFB ALS carbon dual visor cover for Phoenix helmets 001CFB/NVG PAV-001CFB/NVG ALS NVG carbon dual visor cover for Phoenix helmets 001CFB/P PAV-001CFB/P ALS carbon dual visor cover for Phoenix helmets, painted to match 001CFBNVGP PAV001CFB/NVG/P ALS NVG carbon dual visor cover for Phoenix helmets, painted to match 003IL PAV-003IL Tinted inner lens for Phoenix helmets 003OL PAV-003OL Clear outer lens for Phoenix helmets 015B PAV-015B visor lock assembly NVG/SSQR-I PAV-NVG/SSQR-I quick release attachment

11

EDMO: BIG SELECTION, PRODUCTS YOU KNOW & NAMES THAT YOU TRUST. As a class-leading aviation distributor, EDMO keeps pace with the trends of the aerospace industry. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we will have what you’re looking for. Give us a call at 1.800.235.3300 or visit edmo.com for parts and pricing.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

247

Headsets, Intercoms & Accessories Switch & Cable Assemblies

SWITCH & CABLE ASSEMBLIES COMM INNOVATIONS SWITCH & CABLE ASSEMBLIES CIX200, 300 and 400 series switch and cable assemblies can be assembled, repaired or reconfigured for other purposes without a solder gun. The interconnect module is fixed to the rear half of the switch case. All key components (cable, jack, volume control, slide switch, and PTT switch) plug into the interconnect module. The distribution header plugs into the interconnect module to provide the necessary switch and connection functions.

CIX200 SERIES SWITCH & CABLE ASSEMBLIES with microphone interrupt (no key function)

slide switch and/or

volume control plug

PTT switch

cable jack

CIX2

11

CASE & CLIP CODE COLOR CLIP 1 large black 2 none 3 small 4 beige large 5 none 6 small 7 blue large 8 none 9 small A gray large B none R red large olive D largee drab

SWITCH CONFIGURATION CODE 0 1 3

DESCRIPTION mom-mom mom-lock (on) PTT

JACK

VOLUME CONTROL

PLUG

CODE DESCRIPTION none TJT-120 (civil helo) TJ TJT-101 (civil helo) W TJT-120 (military) TJW TJ-101 (military) B TJT-125 (5 contacts) N NATO (Europe) CIJ-051 (commercial C aviation) F U-61/U (USFS) CIJ-055 & CIJ-068 G (general aviation)

CODE none H HA L LA

CODE 74 74M 75 NP 84

IMP none hi hi lo lo

GRND n/a yes no yes no

YP 4L 4X

CABLE & LENGTH CODE K2 KM K3 K6 K10 K15 K20 /XX

DESCRIPTION TP-120 (civil helo) TP-120 (military) U-75/U (USFS) NATO (Europe) U-38/U (5 contacts) CIPC-055B & CIPC068 (general aviation) lugs no plug

DESCRIPTION 2 ft coil 3 ft ** 3 ft coil 6 ft coil 10 ft coil 15 ft coil 20 ft coil XX ft straight

**Special coil cable for EMS applications, 20-inch straight section from end of cable to switch case.

CIXAT200 SERIES SWITCH & CABLE ASSEMBLIES

with microphone interrupt (no key function) & low to high impedance adapter

CIXAT

2

SHIELDING

CASE

SWITCH

VOLUME CONTROL

CODE DESCRIPTION adjustable amp none and shielded transformer shielded amp S and transformer

see above

see above***

CODE none H HA

DESCRIPTION no grounded ungrounded

CABLE see above

PLUG see above

***CI VOX option not available.

248

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Switch & Cable Assemblies

CIX300 SERIES SWITCH & CABLE ASSEMBLIES with single key function

slide switch and/or

volume control plug

PTT switch

cable jack

CIX3 CASE & CLIP

JACK

VOLUME CONTROL

CABLE & LENGTH

PLUG

CODE COLOR CLIP 1 large black 2 none 3 small 4 beige large 5 none 6 small 7 blue large 8 none 9 small A gray large B none R red large olive D large drab

CODE DESCRIPTION none TJT-120 (civil helo) TJ TJT-101 (civil helo) W TJT-120 (military) TJW TJ-101 (military) B TJT-125 (5 contacts) N NATO (Europe) CIJ-051 (commercial C aviation) F U-61/U (USFS) CIJ-055 & CIJ-068 G (general aviation)

CODE none H HA L LA

CODE K2 KM K3 K6 K10 K15 K20 /XX

CODE

IMP none hi hi lo lo

GRND n/a yes no yes no

DESCRIPTION 2 ft coil 3 ft ** 3 ft coil 6 ft coil 10 ft coil 15 ft coil 20 ft coil XX ft straight

74K 6P 6W 6WE 10W*** 10WE 77 YK 5L 5X

11

SWITCH CONFIGURATION CODE 0 1 2 3 0R 1R 2R 3R

DESCRIPTION ICS mom-mom ICS mom-mom ICS mom-lock ICS mom-lock XMIT mom-mom XMIT mom-mom XMIT mom-lock XMIT mom-lock

MIC INTERRUPT CODE none 4 mic hi 5 none 6 mic hi 7 none 8 mic hi 6R none 8R mic hi

DESCRIPTION MIC INTERRUPT ICS mom-lock (vox) mic hi ICS mom-lock (CI vox***) mic hi ICS PTT (3 contact) none ICS PTT (3 contact) mic lo ICS PTT (DPDT) mic hi XMIT PTT (3 contact) none XMIT PTT (DPDT) mic hi

DESCRIPTION U-174/U (wired for key) MS3116E10-6P (6 contact plug) MS3476W10-6P (6 contact plug) MS3476W10-6P & EMI backshell MS3476W12-10P (10 contact plug) MS3476W12-10P & EMI backshell U-77/U (MIL-C-10544) CIPC-055 & CIPC-068 (general aviation) lugs no plug

**Special coil cable for EMS applications 20-inch straight from coil to switch case. ***More MS3476W12-10P wiring options available, see partial list on page 252.

CIXAT300 SERIES SWITCH & CABLE ASSEMBLIES with single key function & low to high impedance adapter

CIXAT

3

SHIELDING

CASE

SWITCH

VOLUME CONTROL

CODE DESCRIPTION adjustable amp none and shielded transformer shielded amp S and transformer

see above

see above**

CODE none H HA

DESCRIPTION no grounded ungrounded

CABLE see above

PLUG see above

**CI VOX option not available.

250

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Switch & Cable Assemblies

CIX400 SERIES SWITCH & CABLE ASSEMBLIES with ICS & transmit key functions

slide switch and/or

volume control plug

PTT switch

cable jack

CIX4 CASE & CLIP

JACK

VOLUME CONTROL

CABLE & LENGTH

PLUG

CODE COLOR CLIP 1 large black 2 none 3 small 4 beige large 5 none 6 small 7 blue large 8 none 9 small A gray large B none R red large olive D large drab

CODE DESCRIPTION none TJT-120 (civil helo) TJ TJT-101 (civil helo) W TJT-120 (military) TJW TJ-101 (military) B TJT-125 (5 contacts) N NATO (Europe) CIJ-051 (commercial C aviation) F U-61/U (USFS) CIJ-055 & CIJ-068 G (general aviation)

CODE none H HA L LA

CODE K2 KM K3 K6 K10 K15 K20 /XX

CODE

IMP none hi hi lo lo

GRND n/a yes no yes no

DESCRIPTION 2 ft coil 3 ft ** 3 ft coil 6 ft coil 10 ft coil 15 ft coil 20 ft coil XX ft straight

74K 6P 6W 6WE 10W **** 10WE **** 77

SWITCH CONFIGURATION SLIDE SWITCH ICS (mom)-Xmit (mom) ICS (mom)-Xmit (mom) ICS (lock)-Xmit (mom) ICS vox (lock)-Xmit (mom) ICS (mom-lock) ICS (mom-lock) ICS (mom-lock) ICS (mom-mom) ICS (mom-mom ICS (mom-mom) ICS (mom)-CIS vox (lock) ICS (mom)-CIS vox (lock) ICS (mom)-CIVox (lock) ICS (mom)-CIVox (lock) ICS (mom)-CIVox (lock)

XMIT PTT none none none none 3 contact 3 contact DPDT 3 contact 3 contact DPDT 3 contact DPDT 3 contact 3 contact DPTDT

**Special coil cable for EMS applications 20-inch straight from coil to switch case. ***This option is only available with switch configurations 3, 5, and 6. ICS is Vox only.

YK

MIC INTERRUPT none mic hi none mic hi none mic lo mic hi none mic lo mic hi mic lo mic hi none mic lo mic hi

5L 5X

11

CODE 0 1 2 3V 4 5 6 4M 5M 6M 5V 6V 7*** 8*** 9***

DESCRIPTION U-174/U (wired for key) MS3116E10-6P (6 contact plug) MS3476W10-6P (6 contact plug) MS3476W10-6P & EMI backshell MS3476W12-10P (10 contact plug) MS3476W12-10P & EMI backshell U-77/U (MIL-C-10544) CIPC-055 & CIPC-068 (general aviation) lugs no plug

****More MS3476W12-10P wiring options available, see partial list on page 252.

CIXAT400 SERIES SWITCH & CABLE ASSEMBLIES

with ICS & transmit key functions & low to high impedance adapter

CIXAT

4

SHIELDING

CASE

SWITCH

VOLUME CONTROL

CODE

see above

see above**

CODE none H HA

none S

DESCRIPTION adjustable amp and shielded transformer shielded amp and transformer

DESCRIPTION no grounded ungrounded

CABLE see above

PLUG see above

**CI VOX option not available.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

251

Headsets, Intercoms & Accessories Switch & Cable Assemblies STANDARD WIRING CONFIGURATIONS

MS3116A10-6P PLUG: -6P MS3476W10-6P PLUG: -6W

MS3116A10-6P PLUG: -6P/1 MS3476W10-6P PLUG: -6W/1

6P STANDARD Mic Hi Mic Lo

MS3116A10-6P PLUG: -6P/2 MS3476W10-6P PLUG:

6P OPTION 1 Mic Hi Mic Lo

ICS key Xmit key

red to B green, brown & all shields to C yellow to F blue to E

Phones Hi Phones Lo

white to D black to A

MS3116A12-10P PLUG: -10P MS3476W12-10P PLUG: -10W MS3476L12-10P PLUG: -10W/L

MS3116A10-6P PLUG: -6PA MS3476W10-6P PLUG: -6WA

6P OPTION 2

6P OPTION A

Mic Hi Mic Lo

green to E red & mic shield to B

Mic Hi Mic Lo

red to B green to C

ICS Key Xmit Key

red to A green, brown & all shields to C yellow to F blue to E

ICS Key Key Return

ICS key Xmit key

yellow to F blue to E

Phones Hi Phones Lo

white to D black to C

Phones Hi Phones Lo

yellow to C brown & overall shield to F white to D black, blue & phone shield to A

Phones Hi Phones Lo

white to D black, brown & all shields to A

MS3116A12-10P PLUG: -10P/1 MS3476W12-1-P PLUG: -10W/1 MS3476L12-10P PLUG: -10P/1L

10P STANDARD

MS3116A12-10P PLUG: -10P/2 MS3476W12-10P PLUG: -10W/2 MS3476L12-10P PLUG: -10W/2L

10P ALTERNATIVE 1

Mic Hi Mic Lo

red to F green & mic shield to G

Mic Hi Mic Lo

Pones Hi Phones Lo ICS key Xmit key Ground

white to A black to B yellow to D blue to E brown & overall & phone shield to J

Phones Hi Phones Lo ICS key Xmit key Ground

red to A green & mic shield to B white to C black to D yellow to E blue to F overall & phone shields to G

MS3116A12-10P PLUG: -10P/5 MS3476W12-10P PLUG: -10W/5 MS3476L12-10P PLUG: -10W/5L

10P ALTERNATIVE 2

10 P ALTERNATIVE 5

Mic Hi Mic Lo

red to E green to F

Mic Hi Mic Lo

Key ground Mic Shield Phones Hi Phones Lo ICS Key Xmit Key Ground

brown to A drain to J white to G black to H yellow to C blue to D brown, overall and phone shields to backshell

Phones Hi Phones Lo ICS Key Xmit Key Ground

red to B green & mic shield to A white to C black to D yellow to E blue to G brown, overall & phone shields to J

11

If the wiring configuration you need is not shown here, please give us a call at 1.800.235.3300 to specify how you would like to see your switch and cable assembly wired.

SKYE AVIONICS DROPCORDS SKYE AVIONICS, LTD. EDMO#

Skye Avionics’ drop cords are constructed to withstand rough use and conditions while providing the user with a versatile, ergonomic design that can be operated with either hand. All drop cords include long-life PTT switches that are rated to withstand 1,000,000 mechanical and electrical cycles and a volume control that is sealed in a container and panel sealed to IP67 specifications. –– Ergonomic design is CNC machined out of aluminum that is hard anodized to resist scratching –– Laser etched –– Heavy duty belt clip –– High quality switches and parts –– Provides volume control and radio PTT –– Coil cord available in varying lengths (see product table) with ICS switch (Lock-Mom)

252

1.800.235.3300 | edmo.com

MFR#

CONNECTOR TYPE

CORD LENGTH (IN)

SAL-200-12

SAL-200

NATO plug

12

SAL-200-24

SAL-200

NATO plug

24

SAL-200-36

SAL-200

NATO plug

36

SAL-200-48

SAL-200

NATO plug

48

SAL-201-12

SAL-201

MS3116F10-6P

12

SAL-201-24

SAL-201

MS3116F10-6P

24

RADIO PTT

SAL-201-36

SAL-201

MS3116F10-6P

36

SAL-201-48

SAL-201

MS3116F10-6P

48

SAL-202-12

SAL-202

MS3126F12-10P

12

yes

SAL-202-24

SAL-202

MS3126F12-10P

24

yes

SAL-202-36

SAL-202

MS3126F12-10P

36

yes

SAL-202-48

SAL-202

MS3126F12-10P

48

yes

SAL-203-12

SAL-203

MS3116F10-6P

12

yes

SAL-203-24

SAL-203

MS3116F10-6P

24

yes

SAL-203-36

SAL-203

MS3116F10-6P

36

yes

SAL-203-48

SAL-203

MS3116F10-6P

48

yes

EDMO DISTRIBUTORS

Headsets, Intercoms & Accessories Intercom Systems

INTERCOM SYSTEMS AA85-001 INTERVOX IITM AIRCRAFT INTERCOM SYSTEM COBHAM The AA85 InterVOX IITM aircraft intercom system is a voice-activated intercom system that provides full radio and intercom capabilities for the pilot and copilot without the clipping that occurs with relay-activated systems. A single AA85 accommodates 2, 4, or 6-place installations with full transmit and intercom capabilities for the pilot and co-pilot along with intercom functions for up to four passengers. Equipped with a tie-in feature that allows the AA85 to be connected to a complex, multi-unit system as either a primary or secondary component. –– Pilot/crew/all modes tree-position toggle switch allows the pilot and crew isolation from passengers; crew and passengers retain full intercom and music capabilities within their group while passengers are prevented from hearing any radio communications during isolated operation –– VOX/LIVE/PTT modes; the intercom mode is set by the position of the respective VOX controls with separate VOX controls for the pilot and crew/passengers that compensate for the differences in noise levels and headset types between the front and rear of the aircraft –– Stereo music input uses sophisticated channel mixing to deliver high quality monaural music to standard aviation headsets –– Adjustable music mute / radio input levels allows music to be adjusted to mute up to 50% for passengers and 100% for the crew; conversely, radio volume levels can be set at a lower level for passengers while maintaining greater volume for the crew –– Exclusive ICS tie line MFR#

MIC INPUTS

AA85-001

4-6

ACCESSORIES AA85-IKC

AA85-IKC

crimp installation kit

AA83 INTERMUSIC™ STEREO INTERCOMS COBHAM The AA83-001 is a four-place stereo voice-activated intercom that supports the pilot, copilot, and two passengers with full intercom capabilities. The units in this series also provide entertainment and communication audio in full stereo to all four headsets and transceiver control for both the pilot and copilot. The InterMUSIC series can be installed in several different configurations from single-unit systems to fully independent stations for the pilot, copilot and passengers. These systems can be further expanded using the tie line connections (compatible with AA80, AA82, AMS4x, and AA9x series units). AA83-001 –– Music is muted during ICS, ATC and transmit operations; individual mic gating on ICS with adjustable muting depth –– Equipped with two color LED annunciators including radio transmit green and ICS triggered amber –– Controls include ICS volume, music level, VOX squelch, RX volume,

EDMO DISTRIBUTORS

EDMO# AA83-001 AA83-100M4

MFR#

MIC INPUTS

AA83-001 AA83-100

4 4

ACCESSORIES AA83-IKC

AA83-IKC

installation kit for AA83

AA82 INTERMUSIC™ STEREO EXPANSION UNIT COBHAM The AA82 InterMUSIC™ Stereo Intercom System is a passenger entertainment and communication system. The AA82-060 system is compatible with AA83 intercoms and provides six stereo positions. The InterMUSIC system supports up to six stereo positions and can be connected to a forward flight crew system or expanded passenger loop using the ICS tie line. –– Music mutes during ICS, ATC and transmit operations; individual mic gating on ICS with adjustable muting depth –– Equipped with two color LED annunciators including radio transmit green and ICS triggered amber –– Controls include ICS volume, music level, VOX squelch, RX volume, RX balance, ICS balance, music balance, ICS bass, music bass and dual pilot and copilot/passengers VOX controls –– Modes include: LIVE, KEYED, VOX –– Voice track trigger circuit with adjustable threshold on front panel; LIVE or HOT mic is operated by rotating the VOX control to extreme counter-clockwise position EDMO# AA82-060

MFR# AA82-060

11

EDMO# AA85-001

RX balance, ICS balance, music balance, ICS bass, music bass and dual pilot and copilot/passengers VOX controls –– Modes include: LIVE, KEYED, VOX –– Voice track trigger circuit with adjustable threshold on front panel; LIVE or HOT mic is operated by rotating the VOX control to extreme counter-clockwise position –– AA83-100M4 includes crimp kit

MIC INPUTS 6

ACCESSORIES AA82060IKC

AA82-060-IKC

AA82-060 crimp install kit

AA80 INTERVOX INTERCOM SYSTEM COBHAM The AA80 InterVOX is an advanced cockpit intercom system for general aviation flying that provides full boommic transmit and ICS operation for the pilot, copilot, and 2-4 passengers. The InterVox also provides a stereo input that is muted during transmit and ICS operations (pilot privacy AA80-001 function). Transparent ICS allows immediate transmission from the ICS mode without any additional switching. –– InterVOX system uses AEM’s audio processing system of dynamic

1.800.235.3300 | edmo.com

253

Headsets, Intercoms & Accessories Intercom Systems

–– –– –– –– ––

noise reduction and selective bandwidth to produce clean, crisp intercom audio under noisy conditions High output power and low distortion ensures adequate level for all types of headsets and flying conditions Provides split bus operation and automatic emergency switching in the event of power failure Provides internal overvoltage and reverse voltage protection AA80-001 has VOX function AA80-020 with VOX and PTT functions

EDMO# AA80-001 AA80-020

MFR#

MIC INPUTS

AA80-001 AA80-020

4 4

–– Includes separate mic circuits for front and back with 3-way isolation control for pilot/crew/all –– Equipped with superior SQL circuitry –– Back-lit control panel with on/off button is easy to read –– Fail-safe feature –– Accommodates smartphone and satellite phone use with a music-in/cell phone jack –– Record out –– Provides two (2) push-to-talk jacks (2) –– Uses two 9V alkaline batteries –– Auxiliary power jack and cigarette power cord adapter with in-line fuse for protection

ACCESSORIES AA80-IKC

AA80-IKC

AA80 crimp install kit

TWO PLACE PORT INTERCOM

11

PILOT USA

EDMO# PA-200T MFR# PA-200T The PA-200T 2 Place Mono Intercom provides crisp communications for pilot and co-pilot. This unit includes adjustable controls for volume and squelch for precise adjustments and to minimize ambient noise. The PA-200T is a voice activated unit that provides options for adding two push-to-talk switches for intercom use (switches sold separately). This intercom includes an AUX jack that can be used for cell/satellite phone calls or entertainment media input. –– Portable and compact design –– Includes an AUX input for cell/satellite phones or music –– Provides volume control for pilot and co-pilot as well as an adjustable squelch circuit –– Equipped with voice activated (VOX) transmission capabilities with the option to add two push-to-talk switches –– Fail safe mode –– 9 V battery provides 25-30 hours battery life and is easy to access

FOUR PLACE STEREO INTERCOM PILOT USA

EDMO# PA-400ST MFR# PA-400ST The PA-400ST is a tried-and-true 4 Place Stereo Intercom that has been used in the general aviation industry for over 25 years. This unit has a completely portable design that provides four-station capability with 3-way isolation control, dual volume controls for pilot and copilot, and a soft-mute feature that automatically lowers the volume when ATC comes in. The PA400ST is also equipped with an AUX cell phone jack that is compatible with smartphones and satellite phones. –– Completely portable design with four-station capability –– Provides voice activated (VOX) transmission capabilities, a SoftMute feature that automatically lowers volume when ATC comes in, and dual volume controls for pilot and copilot

254

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

COMMITTED TO QUALITY FOR OVER 40 YEARS. EDMO is a wholesale distributor of aircraft electronics and accessories, installation and bench supplies, test equipment and tooling, tactical communications products, ground support equipment, and pilot supplies. This extensive product range is complemented by rapid delivery, competitive prices, and personalized service. Customers know that when they purchase from EDMO, they can expect products and services that are regulated by the exacting standards set forth by EDMO’s ISO-certified quality control system.

EDMO maintains a quality control system and is ISO 9001:2008/AS9120 registered // edmo.com // 1.800.235.3300

Clocks, Instruments & Annunciators

Chronometers.................................................................................................... 258 Pressure & Temperature Sensors & CO Detectors............................................ 264 Pressure Switches............................................................................................. 269 Turn Coordinators And Turn & Slip Indicators................................................... 269 Annunciator Control Units................................................................................. 273 Speed & Altitude Indicators............................................................................... 274 VOR Indicators.................................................................................................. 274 Compasses....................................................................................................... 275 Instrument Accessories..................................................................................... 275 Cooling Fans..................................................................................................... 276

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

257

Clocks, Instruments & Annunciators Chronometers

CHRONOMETERS

MFR#

DESCRIPTION

800-28V-BAT

800 SERIES CHRONOMETERS

800-28-SHB

800-28V-SH-BAT

DAVTRON INC

800-28-N/B

800-28V-NVG-BAT

Davtron’s 800-series clocks are multi-functional chronometers with an easy to use two-button design. They display universal time, local time, and elapsed times (other functions are available, see the variant versions below). The 800 series come with two different screen formats, either liquid crystal incandescent—both with illuminated screens that are readable in high sunlight situations. The 800 series is divided into these parts in the following sections: M800, MB800, M803, M850, M877, M880A, and M811

M800 CHRONOMETERS –– –– –– –– ––

–– –– –– ––

2-1/4 inch internal mount Two-button control system Laser engraved faceplate Liquid crystal display is illuminated for reading in dark conditions Provides universal time, local time, elapsed time with countdown timer, and an elapsed time alarm Optional audio alarm NVIS green A option Keep-alive battery option FAA-PMA approved

weight: voltage: keep alive current: internal lighting:

12

EDMO# 800-28/BAT

NVIS option: universal time: local time: elapsed time count up: elapsed time countdown: elapsed time alarm: battery type: compatible with:

EDMO#

4 oz 12 to 30 volts 0.004 amps. 12 to 30 volts 230 mA at 5V, 120 mA at 14V, 50 mA at 28V (specify voltage when ordering) NVIS green A lighting 24 hour format 12 hour or 24 hour option, user selectable starts in minutes and seconds, then hours and minutes up to 99:59 hours settable from one second to 59 minutes and 59 seconds activates at zero when counting down AA battery Diamond Aircraft Model DA20-A1 Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35-33 and 35-A33

MFR#

800-5V 800-5V/BAT 800-5V/NVG 800-5V-N/B

800-5V 800-5V-BAT 800-5V-NVG 800-5V-NVG-BATT

800-14V 800-14V/24 800-14/BAT 800-14-N/B 800-28V/24

800-14V 800-14V-24 800-14V-BAT 800-14V-NVG-BAT 800-28V-24

800-28V 800-28/NVG

800-28V 800-28V-NVG

DESCRIPTION 800-5V (GMT, LT, ET) (5V lighting) 800-5V with battery holder (AA) 800-5V with night vision lighting green A 800-5V-NVG with memory battery holder (AA) 800-14V (GMT, LT, ET) (14V lighting) 800-14V with 24-hr lighting 800-14V with battery holder 800-14V with memory battery holder 800-28V with 24-hour military time (28V lighting) 800-28V (GMT, LT, ET) 800-28V with night vision lighting and memory battery holder (AA)

800-28V with memory battery holder (AA) 800-5V with illuminated buttons and battery holder 800-28V lighting with night vision lighting and memory battery holder (AA)

More versions available. Call EDMO for more information.

MB800 CHRONOMETERS FOR BEECHCRAFT The MB800 is an 800-series chronometer designed with a yoke mount for use with Beechcraft aircraft. –– Yoke mount for Beechcraft –– Two-button control system –– Liquid crystal display is illuminated for reading in dark conditions –– Displays universal time and local time –– Elapsed time with countdown timer –– Elapsed time alarm –– Optional audio alarm –– NVIS green A option –– FAA-PMA Approved

weight: voltage: keep alive current: internal lighting: NVIS option: universal time: local time: elapsed time count up: elapsed time countdown: elapsed time alarm: battery type: compatible with:

EDMO#

3.3 oz 12 to 30 volts 0.004 amps. 12 to 30 volts 230 mA at 5V, 120 mA at 14V, 50 mA at 28V (specify voltage when ordering) NVIS green A lighting 24 hour format 12 or 24 hour option, user selectable starts in minutes and seconds, then hours and minutes, up to 99:59 hours settable from one second to 59 minutes and 59 seconds activates at zero when counting down AA battery Diamond Aircraft Model DA20-A1 Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35-33 and 35-A33

MFR#

B80028V24B b800-28v24b B800-28V/C

800B-28V-CRM

B800-28V/B

800B-28V-BLK

B80028V/SB

800B-28V-SH-BLK

DESCRIPTION 800B-28V with black yoke for mounting in Beechcraft, 24-hour military time 800-28V with cream yoke for mounting in Beechcraft 800-28V with black yoke for mounting in Beechcraft 800B-28V- with black yoke for mounting in Beechcraft, illuminated buttons

More versions available. Call EDMO for more information.

More versions available. Call EDMO for more information.

258

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Chronometers

M803 CHRONOMETERS

M811 CHRONOMETERS

The M803-series chronometers are similar to the M800 but also provide readings for outside air temperature (OAT) in Fahrenheit and centigrade and voltage. –– 2-1/4 in internal mount –– Laser engraved faceplate –– Liquid crystal display is lighted for reading in dark conditions –– Provides universal time, local time, flight time with alarm, elapsed time with countdown timer, and elapsed time alarm –– Optional audio alarm –– Voltage –– OAT Fahrenheit and Celsius –– NVIS green A option –– Keep alive battery option –– FAA-PMA approved

The M811 chronometer provides a six-digit, incandescent display for all three functions (flight time, elapsed times count up, and local time). Memory battery included. –– 2-1/4 in internal mount –– Provides local time, flight time, and elapsed time with countdown timer –– Sunlight readable incandescent display –– NVIS green A option –– Six-digit display for all three functions –– Two faceplate options: the grey faceplate with screen-printed nomenclature and a black faceplate with engraved nomenclature –– Polaroid filter –– FAA-PMA approved

weight: input current: input voltage: voltage range: keep alive current: internal lighting: NVIS option: universal time: local time: flight time: flight time alarm: elapsed time count up: elapsed time countdown: elapsed time alarm:

EDMO# EDMO#

MFR#

803-5V

803-5V

803-5V-NVG 803-14V

803-5V-NVG 803-14V

803-14-NVG

803-14V-NVG

803-28V

803-28V

803-28-NVG

803-28V-NVG

803B-2

803-28V-C

DESCRIPTION 803-5V (UT, LT, FT and ET, voltmeter, OAT (temperature probe included)) (5V lighting) 803-5V with night vision 803-14V (UT, LT, FT and ET, voltmeter, OAT (temperature probe included)) (14V lighting) 803-14V with night vision lighting green A (temperature probe included) 803-28V (UT, LT, FT and ET, voltmeter, OAT (temperature probe included)) (28V lighting) 803-28V with night vision lighting green A (temperature probe included) 803-28V with gray buttons

More versions available. Call EDMO to inquire about your specific needs.

EDMO DISTRIBUTORS

811B-12 811B-24 811B-24A 811B-24/N 811B-24/N1 811BFTR24

7.5 oz 0.4 amps 14 volts NVIS green A lighting 12-hour or 24-hour option (user selectable) 24 hour 24 hour 6 volt battery with 2-year operating life BAE Jetstream Models 3101 and 3201 Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35-33, and 35-A33 British Aerospace Model BAE/Avro 146 British Aerospace Model 125-700 de Havilland Models Dash-8 Series 100 (101,102,103) de Havilland Models Dash-8 Series 300 (301,311) Falcon Models 10, 900EX, and 2000 Gates Learjet Models 24E, 24F, 25D, 25F, 35A, and 36A IAI Models 1125WW Astra and Astra SPX Mystère Falcon Models 50, 200, and 900 Waco Model Classic WACO F5 and F5c

MFR# 811B-12 811B-24 811B-24A 811B-24-NVG 811B-24NVG-15 811BFTR24

12

battery type: compatible with:

5.02 oz 0.2 amps 12 to 30 volts 8 volts to 32 volts ±0.2 volts typ. -55°C to +100°C ±0.2°C typ. 0.004 amps. 12 to 30 Volts 240 mA at 5V, 240 mA at 14V, 100 mA at 28V (specify voltage when ordering) NVIS green A lighting 24 hour format 12 hour or 24 hour option records in hours and minutes, up to 99:59 full set range of flight time starts in minutes and seconds, then hours and minutes, up to 99:59 hours settable from one second to 59 minutes and 59 seconds activates at zero when counting down AA memory battery Bell Helicopter Textron Model 407

weight: input current: input voltage: NVIS option: local time: flight time: elapsed time count up: battery type: compatible with:

DESCRIPTION 811B-12 (FT & ET) 12-hour lighting 811B-24 (FT & ET) 24-hour lighting 811B-24 (with gray faceplate) 24-hour lighting 811B-24 with night vision 811B-24 with night vision and compatible with KW515-4F displays (green A) 811B-24 with flight time reset

ACCESSORIES 811-INV 811-BATT 811-28 KW505F

811-INV 811-BATT-1 811-28 RP-KW505F

inverting female connector memory battery pack for 811B dropping resistor for 811B Davtron digital display for model 811B readout display/1 digit

More versions available. Call EDMO for more information.

1.800.235.3300 | edmo.com

261

Clocks, Instruments & Annunciators Chronometers M850 CHRONOMETERS

M877 CHRONOMETERS

The M850 chronometers provide seven functions (Greenwich Mean Time, local times, flight time with alarm, elapsed time with countdown timer, and elapsed time) with an incandescent display and illuminated buttons and annunciators. –– 2-1/4-inch front mount –– Two button control system with illuminated buttons and annunciators –– Bright, sunlight-readable, incandescent display with an automatic dimmer –– NVIS green A option –– Displays Greenwich Mean Time, local times, flight time with alarm, elapsed time with countdown timer, and elapsed time alarm –– Also equipped with an optional audio alarm –– Two faceplate options: the grey faceplate with screen-printed nomenclature and a black faceplate with engraved nomenclature –– Keep alive battery option –– FAA-PMA approved

The M877 series chronometers are similar to the M850 chronometers but are instead designed with an internal mount design rather than a front mount. This series provides GMT, local times, flight time with alarm, and elapsed time with countdown timer and alarm. –– 2-1/4-inch internal mount –– Two button control system with illuminated buttons and annunciators –– Bright, sunlight-readable, incandescent display with an automatic dimmer –– NVIS green A option –– Displays Greenwich Mean Time, local times, flight time with alarm, elapsed time with countdown timer, and elapsed time alarm –– Two faceplate options: the grey faceplate with screen-printed nomenclature and a black faceplate with engraved nomenclature –– Keep alive battery option –– FAA-PMA approved

12

weight: input current: input voltage:

5 oz 0.2 Amps 14 to 28 volts (backlight available 5V, 14V or 28V lighting (see options below) keep alive current: 0.00004 amps display: incandescent, automatic dimming NVIS option: NVIS green A lighting for Model 850 Greenwich Mean Time: 24 hour format local time: 12 hour or 24 hour option flight time: records in hours and minutes up to 99:59, 99.99 flight time alarm: hour option full set range flight time elapsed time count up: starts in minutes and seconds, then hours and elapsed time countdown: minutes, up to 99:59 hours elapsed time alarm: settable from one second to 59 minutes and 59 seconds activates at zero when counting down battery type: N size alkaline compatible with: Israel Aircraft Industries Model 1125 Astra and Galaxy

weight: input current: input voltage: keep alive current: NVIS option: Greenwich Mean Time: local time: flight time: flight time alarm: elapsed time count up: elapsed time countdown: elapsed time alarm: battery type: compatible with:

EDMO# EDMO#

MFR#

850-5V

850-5V

850-28V

850-28V

850-28V-24 850-14V

850-28V-24 850-14V

DESCRIPTION 850-5V (includes GMT, LT, FT, ET) LED clock with illuminated buttons (5V lighting) 850-28V (includes GMT, LET, FT, ET) LED clock with illuminated buttons, front mount (5V lighting) 850-28V with 24-hour lighting (28V lighting) 850-14V (includes GMT, LT, FT, ET) LED clock with illuminated buttons (front mount, 14V lighting)

More versions available. Call EDMO for more information.

262

1.800.235.3300 | edmo.com

MFR#

877-5V

877-5V

877A-5V 877-14V

877A-5V 877-14V

877-28V

877-28V

877A-28V

877A-28V

877-28V-24

877-28V

5 oz 0.2 amps 14 to 28 volts (backlight available with 5V, 14V, or 28V lighting) 0.00004 amps NVIS green A lighting 24 hour format 12-hr or 24-hr option records in hours and minutes, up to 99:59, 99:99 hour option full set range flight time starts in minutes and seconds, then hours and minutes, up to 99:59 hours settable from one second to 59 minutes and 59 seconds activates at zero when counting down AA size alkaline Mystère Falcon 50 and 900 Learjet Airplanes 35A and 60 BAE Jetstream Model 4101

DESCRIPTION 877-5V (GMT, LT, FT, & ET) LED clock with illuminated buttons (rear mount, 5V lighting) 877A-5V with gray faceplate 877-14V (GMT, LT, FT & ET) LED clock with illuminated buttons (rear mount, 14V lighting) 877-28V (GMT, LT, FT, ET) LED clock with illuminated buttons (rear mount, 28V lighting) 877-28V (GMT, LT, FT & ET LED clock 28V illuminated buttons (rear mount) 877-28V with 24-hour light

More versions available. Call EDMO for more information.

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Chronometers

M880 CHRONOMETERS

LC-2 CHRONOMETERS

The M880-series are designed for military use and provide GMT and elapsed time with countdown timer and alarm. –– 3 ATI front mount –– Two-button control system –– Laser engraved faceplate –– Six-digit display provides GMT in hours, minutes, seconds, local time, elapsed time with countdown timer, and elapsed time alarm –– Control switch can be set up for remote control –– Incandescent display is sunlight readable and can be manually dimmed –– NVG filter compatible NVIS green A or BG7B –– Keep alive battery

ADS/TRANSICOIL

weight: input current: input voltage: NVG: Greenwich Mean Time: local time: elapsed time count up: elapsed time countdown: elapsed time alarm: battery type: compatible with:

10 oz 500 mA 28 volts compatible: NVIS Green A or BG7B 24 hour format, full six-digit hours/minutes/seconds 12 hour or 24 hour option starts in minutes and seconds, then hours and minutes up to 99:59 hours settable from one second to 59 minutes, 59 seconds activates at zero when counting AA size alkaline for military use

The Astrotech LC-2 chronometer is a precision clock-timer that uses a custom-designed microprocessor circuit to provide time, date, and elapsed timer with a hold or time-out feature. The microprocessor is attached to a single circuit board—a simplified construction technique that results in durable, reliable performance. The circuitry is not subject to dirt, vibration, friction, or the wear characteristics of mechanical clock movements. –– Liquid crystal display with lighting for night flying –– 14V and 28V bulbs are included with each panel-mounted clock –– Selectable 12 or 24-hour clock with four-digit display –– Timing accuracy is typically better than a few seconds per month –– 24-hour elapsed timer –– Date displayed in month/day format –– Three-button operation –– Rear mounts into standard 2-1/4-inch instrument panel cutout –– 2 years battery life (power drain when connected to the aircraft battery is negligible [less than 0.003 amps])

weight: power: approvals:

EDMO# EDMO#

MFR#

M880A-S

M880A-S

880A-28

M880A

DESCRIPTION 880A (GMT, LT & ET military clock) with night vision compatibility (green A) 880A resistor 20 Ohm 1%25W aluminum housing

< 5 oz batteries: 2 years aircraft battery: power drain < 0.003 amps RTCA DO-160

MFR#

AT420100

AT420100

AT420000

AT420000

DESCRIPTION panel mounted, powered with 2 internal AAA batteries, 14V and 28V lamps included panel mounted , aircraft powered, 14V & 28V lamps included

12

More versions available. Call EDMO for more information.

SON-ALERT AUDIO ALERT DAVTRON INC

EDMO# SONALERT MFR# SONALERT The Son-Alert is a warning alarm for use with chronometer models 800, 803, 850, and 877.

weight: mode of operation: frequency: current draw: voltage rating: loudness: storage temperature: operating temperature:

1.5 oz continuous tone 2900 Hz ±500 Hz 4 mA max @ 10 VDC 18 mA max @ 48 VDC 10-48 VDC (min. voltage): 68 dB(A) min. @ 2ft and 10 VDC (max voltage): 80 dB(A) min. @ 2ft and 48 VDC -40°C to +85°C -30°C to +65°C

EDMO DISTRIBUTORS

MD93 DIGITAL CLOCK DUAL USB CHARGING PORT MID-CONTINENT INSTRUMENTS AND AVIONICS

EDMO# 6420093-1 MFR# 6420093-1 A simple 2-in-1 solution, the MD93 Series Digital Clock and USB charger provides accurate time keeping paired with in-flight USB charging. The MD93 clock provides four modes: local time, universal time, flight timer, and stopwatch while the dual USB charging port provides enough electric current to power up any standard or high-power device with a USB interface. In addition to charging, the MD93 provides surge protection, shielding itself and device connected to it from short circuit, power surges, and over-current potential. –– Six-digit, seven-segment LED clock and USB charger –– Four modes: local time, universal time, flight timer, and stopwatch –– Flight time duration automatically displays when power is applied to the aircraft and can be reset in manual mode –– Clock settings include 12- or 24-hour mode and seconds On or Off

1.800.235.3300 | edmo.com

263

Clocks, Instruments & Annunciators

Pressure & Temperature Sensors & CO Detectors –– Multiple lighting schemes allows manual or automatic dimming –– 8-year internal battery maintains time and flight timer memory when not powered by the aircraft –– USB interface provides 2.1 amps per charging port –– Compatible with Apple and other USB devices –– Protects itself and the charging device from short circuit, power surges and over-current potential –– Compact 2-inch size fits standard panel cutout

weight: dimensions: power input: power output: clock accuracy: temperature: altitude: mounting: connector kit: USB interface: case:

0.3 lb 2.39 × 2.39 × 1.15 in max 10-32 VDC, 27 watts max 2.1A @ 14 VDC; 1A @ 28 VDC (clock only) 5.0 ± 0.25 VDC; 2.1A per USB port ±0.5 seconds in 24 hours -40°C to 70°C (-40°F to 148°F) 55,000 ft rear-panel mounted, (4) #6 screws MCIA P/N 9018178 USB Standard-A anodized aluminum black

PRESSURE & TEMPERATURE SENSORS & CO DETECTORS DAVTRON TEMPERATURE PROBES DAVTRON INC

ANALOG TEMPERATURE PROBES Davtron temperature probes equipped with an Analog Devices AD590KH 2-terminal temperature-to-voltage transducer.

655 PROBE

C307PS

MD-90 CLOCK

12

MID-CONTINENT INSTRUMENTS AND AVIONICS EDMO# MD90 MFR# MD-90-1 The MD90 is an electric, quartz-movement, analog 12-hour aircraft clock. The clock is 8-32V and non-backlit. –– Precision quartz movement –– Compact 2-1/4 inch size fits standard panel cutout –– Transient and reverse polarity protected –– Low power consumption (3 mA) –– Continuously powered by aircraft battery

weight: dimensions: voltage input range: current input: accuracy: temperature: altitude: humidity: vibration: certification: mounting: connector: approvals:

264

0.5 lb 2.5 × 2.5 × 3.2 in 8 – 32 VDC 3 mA max (without lighting) ±30 seconds in 24 hrs –40°F to +180°F –1,000 to +55,000 ft 0 to 9% at 25°C 0.02 in dbl. ampl., 1.5g @5 to 50 Hz FAA PMA approved front or rear panel #6-32 threaded terminals FAA PMA approved

1.800.235.3300 | edmo.com

linear current output: temperature range: terminals (2): power supply range: material: approvals:

1uA/K (AD590KH) -55°C to 150°C (AD590KH) voltage in/current out (AD590KH) 4 to 30 Volts (AD590KH) nickel-plated probe case and nut DO160 salt-fog tested

DIGITAL TEMPERATURE PROBES Davtron’s D307PS probe is simple and efficient to use, requiring only one port pin for communication and no external components. –– Uses a 1-Wire® interface that requires only one port pin for communication –– Each device has a unique 64-bit serial code stored in an onboard ROM –– Multi-drop capability provides simplified distributed temperature sending applications –– No external components required –– Can be powered from a data line

interface: temperature range: power supply range: material: approvals:

D307PS

1-Wire® interface, requires one port pin -55°C to +125°C ±0.5°C, accuracy from -10°C to +85°C 3 - 5.5 Volts nickel-plated probe case and nut DO160 salt-fog tested

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators

Pressure & Temperature Sensors & CO Detectors

EDMO#

MFR#

COMPATIBLE DAVTRON INSTRUMENTS

LENGTH/ COLOR

DAVTRON INC

ANALOG PROBE-2FT C307PS 655 PROBE

PROBE-2FT307CD, 307FD RB-MINI PROBE-12-FT- 301, 303, 307, 655, 803 WHT-C307PS 655-PROBE 301, 303, 307, 655, 803

2 ft / red and black twisted 12 ft / white

D307PS

12 ft / white

7 ft / red and black twisted

DIGITAL* D307PS

301, 303, 307, 655

*Digital only; use with units with a “D” in the serial.

M655 SERIES MULTIFUNCTION INDICATORS DAVTRON INC

MFR#

655-1

1032-655-1

655-2

655-2

655-2-NVG

655-2-NVG

DESCRIPTION OAT in Fahrenheit and Celsius, pressure and density altitude, DCV, rectangle (temperature probe included), voltage, and deviation alarm OAT in Fahrenheit and Celsius, C and F, pressure and density altitude, DC voltage (rear mount), temperature probe included OAT in Fahrenheit and Celsius, C and F, pressure and density altitude, DC voltage (rear mount), temperature probe included, NVG green A

EDMO DISTRIBUTORS

The M303 series multifunction indicators display outside air temperature in Fahrenheit and Celsius while also providing aircraft voltage readings so that the pilot can anticipate possible low voltage conditions before they occur (the M303 indicators are equipped with an alarm for instances of low voltage). –– Lightweight –– Available in 2-1/4 standard mount or front mount –– Sunlight readable display with automatic dimming –– Miniature remote probe –– Measures outside temperature in degrees Celsius and Fahrenheit –– Aircraft voltage with alarm –– Laser engraved faceplate –– FAA-PMA approved

weight: temp. range: input voltage: input current: operating temp:

EDMO#

4 oz 307CD: -65°C to +150°C accuracy ±1% of full scale 307FD: -70°F to +290°F accuracy ±1% of full scale 14 to 28 volts 150 mA max. -25°C to +60°C

MFR#

303-1

1005-303-1

303-2

1006-303-2

DESCRIPTION OAT Fahrenheit and Celsius (temperature probe included), front mounted OAT Fahrenheit and Celsius (temperature probe included), rear mounted

12

The M655 multifunction indicators automatically compute density altitude without requiring the pilot to manually enter air temperature and pressure altitude into the flight computer. The M655 measures outside air temperature and receives pressure altitude information from 655-1 the blind encoder or encoding altimeter and then converts this information to a direct read-out of density altitude (using US standard atmosphere tabulation). Take-off roll, maximum rate of climb, and fuel consumption are all determined using the aircraft’s flight manual and density altitude. –– 2.25 in standard mount or front mount –– Outside air temperature in Fahrenheit and Celsius 655-2 –– Pressure altitude –– Density altitude –– Aircraft voltage –– Voltage alarm (not on NVG unit) –– Deviation alarm (not on NVG unit) –– Sunlight readable display –– Compatible with Beech Models 35, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, 35-33, and 35-A33 –– FAA-PMA approved EDMO#

M303 SERIES MULTIFUNCTION INDICATORS

307FCI CABIN AND OUTSIDE AIR TEMP INDICATOR DAVTRON INC

EDMO# 307FCI MFR# 1012-307FCI The 307FCI Cabin and Outside Air Temp Indicator provides outside air temperature data and cabin air temperature on an easy to read screen with an installation that requires minimal panel space. –– Provides temperature in Fahrenheit and Celsius –– Minimum panel space –– Lightweight –– Sunlight readable display with automatic dimming –– Miniature remote probe –– Laser engraved faceplate –– Compatible with DeHavilland Models Dash-8, Series 100 (Model 101, 102, 103) –– FAA-PMA approved

1.800.235.3300 | edmo.com

265

Clocks, Instruments & Annunciators

Pressure & Temperature Sensors & CO Detectors O.A.T. F&C INDICATOR weight: temp. range: input voltage: input current: operating temp:

4 oz -40°C to +100°C accuracy ±1% of full scale -40°C to +199°C accuracy ±1% of full scale 12 to 30 volts 150 mA max. -25°C to +60°C

DIGITAL O.A.T. (FC) VOLTMETER DAVTRON INC

EDMO# 307FCE MFR# 1011-307FCE The 307FCE Digital OAT and voltmeter provides outside air temperature data in Fahrenheit and Celsius as well as voltage on an easy to read screen with an installation that requires minimal panel space. –– Minimum panel space –– Lightweight –– Sunlight readable display with automatic dimming –– Miniature remote probe –– LED display –– Laser engraved faceplate –– Displays temperature in Celsius and Fahrenheit –– Voltage (low voltage alarm) –– FAA-PMA approved

12

weight: temp. range: input voltage: input current: unit default alarm: R3 & R4: operating temp: accuracy:

266

307FCE

4 oz -40°C to +100°C accuracy ±1% of full scale -40°C to +199°C accuracy ±1% of full scale 14/28 volts 150 mA max. set to flash 11v or below located on back board alarm off/1.5 ohm resistor on R3 alarm 20v or less/1.5 ohm resistor on R4 -25°C to +60°C ±1% of full scale

1.800.235.3300 | edmo.com

DAVTRON INC

EDMO# 307FC MFR# 1010-307FC The 307FC is a digital outside air temperature gauge that provides data in both Fahrenheit and Celsius. –– Minimum panel space –– Lightweight –– Automatic dimming –– Miniature remote probe –– Sunlight readable LED display –– Laser engraved faceplate –– Display Celsius and Fahrenheit –– FAA-PMA approved

weight: temp. range: input voltage: input current: operating temp: accuracy:

4 oz -40°C to +100°C accuracy ±1% of full scale -40°C to +199°C accuracy ±1% of full scale 14 to 30 volts 150 mA max. -25°C to +60°C ±1% of full scale

CELSIUS DIFFERENTIAL INTERCOOLER GAUGE W/MINI PROBE DAVTRON INC

EDMO# 307CD MFR# 1009-307CD The 307CD displays engine air cooling in degrees Celsius. –– Minimum panel space –– Lightweight –– Sunlight readable display with automatic dimming –– Miniature remote probe –– Laser engraved faceplate –– Fahrenheit or Celsius –– FAA-PMA approved

EDMO DISTRIBUTORS

More than the sum of our parts.

FEATURED: INSTALLATION & BENCH SUPPLIES EDMO Distributors has provided customers with quality aviation installation and bench supplies for over 40 years. EDMO’s comprehensive product line includes parts for electrical interconnect, wire and cable, pitot static supplies, avionics and instrument mounting, installation tools, and aircraft chemicals and cleaners. But, EDMO provides so much more than just a deep inventory—when customers order installation supplies from EDMO, they can always expect competitive prices, personalized service, and rapid delivery. We are more than the sum of the parts we provide; we believe in service and the utmost quality. In fact, EDMO backs up its commitment to quality with an exacting quality control system and by maintaining ISO 9001 and AS9120 registrations. Visit us online at edmo.com or speak to our friendly sales staff at 1.800.235.3300.

FOR FULL RANGE OF INSTALL & BENCH SUPPLIES, SEE SECTIONS 1-5.

Clocks, Instruments & Annunciators

Pressure & Temperature Sensors & CO Detectors AERO 452 CO DETECTOR weight: temp. range:

4 oz 307CD: -65°C to +150°C accuracy ±1% of full scale 307FD: -70°F to +290°F accuracy ±1% of full scale 14 to 30 volts 150 mA max. -25°C to +60°C

input voltage: input current: operating temp:

M301-SERIES TEMPERATURE INDICATORS DAVTRON INC The M301-series temperature indicators display outside air temperature in either Celsius or Fahrenheit. Additional LED screen colors and configurations available, see table below. –– Measures temperature in Fahrenheit and Celsius –– Uses minimum panel space –– Lightweight –– Sunlight readable display with automatic dimming –– Miniature remote probe –– Laser engraved faceplate –– FAA-PMA approved

weight: temp. range:

The AERO 452 is a TSO-certified carbon monoxide detector for use in GA applications that detects and measures carbon monoxide in the cockpit. If CO is found to be present, the AERO 452 provides a visual alert to the crew. The 452 also includes a built-in pressure compensation 452-101011 sensor that detects cabin altitude changes; the unit then sends a signal to a remote light (if installed) when cabin altitude goes above 10,000, 12,500, and 14,000 feet. –– TSO certified; FAA-approved for use in certified aircraft –– Package includes: AERO 452, FAA-approved paperwork for installation authorization

301C/A

301F-GRN

4 oz 301C -40°C to +100°C Accuracy ±1% of full scale 301F -40°F to +199°F Accuracy ±1% of full scale 14 to 28 volts 150 mA max. -25°C to +60°C LED

weight: input power: power usage less: temp range: inspection: humidity: circuit breaker: design meets: CO sensor tested to: alarm:

EDMO# 452-101011 452-201011

3.5 oz 14/28 VDC < 0.25 watt -20°C to 55°C each unit 100% tested 5% to 95% RH (non-condensating) 2 amp TSO-C48A 25,000 ft between 50-70 ppm in <5 min

MFR# 452-101-011 452-201-011

MOUNT panel mount remote mount

INPUT/OUTPUT RS232 RS232

12

input voltage: input current: operating temp: display:

GUARDIAN AVIONICS

EDMO#

268

MFR#

DESCRIPTION

301C 301C/A

1001-301C 1002-301C-A

301F 301F/A

1003-301F 1004-301F-A

301C-GRN 301C-A-WHT

1001.1-301C-GRN 1002.2-301C-A-WHT

301C-A-GRN

1002.1-301C-A-GRN

301F-GRN 301F-A-WHT

1003.2-301F-GRN 1004.2-301F-A-WHT

301F-A-GRN

1004.1-301F-A-GRN

OAT Celsius 301C with 3-pin connector for included temperature probe OAT Fahrenheit 301F with 3-pin connector for included temperature probe OAT Celsius with green LED 301C with 3-pin connector for included temp. probe and a white LED 301C with 3-pin connector for included temp. probe and a green LED OAT Fahrenheit with green LED 301F with 3-pin connector for included temp. probe and a white LED 301F with 3-pin connector for included temp. probe and a green LED

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Pressure Switches

PRESSURE SWITCHES

TURN COORDINATORS AND TURN & SLIP INDICATORS

5000 SERIES PRESSURE SWITCH HOBBS

TURN & SLIP INDICATOR MID-CONTINENT INSTRUMENTS AND AVIONICS

76579

77039

79380

The 5000 Series pressure switches are designed for use in extended duty applications. The switch is factory set but can be adjusted in the field. –– Kapton diaphragm for compatibility with a wide variety of fluids –– Includes various terminations including a Metri-Pack connector that forms a tight seal when connected (see versions below

type: contacts: set point: operating pressure: proof pressure: burst pressure: ratings:

base: cover: options:

MFR#

76579

076579C

77039

077039C

EDMO#

polyimide film -40°F to 250°F+ 1/8-27 NPT male thread #8 -32 screws, 1/4-in blade, 280 Series Metri-Pack SPST-N.O., N.C., 1 circuit adjustable dual circuit, or 2 circuits adjustable dual circuit. Also available are N.O./N.O. dual circuit and N.C./N.C. dual circuit plated steel glass reinforced polyester brass, plastic, or stainless steel base; various base connector thread sizes; wire leads (potted and sealed)

DESCRIPTION dual circuit/one circuit adjustable/screw terminal dual circuit/one circuit adjustable, mates with Packard/Metri-Pack terminal

079380A 00 pressure switch boot

Additional versions available, see more at edmo.com.

EDMO DISTRIBUTORS

1.2 lb 3.25 × 3.25 × 4.25 in 12-32 DC 0.35 A yes white / black 3 standard 2-minute turn –30°C to + 50°C -1,000 ft to 35,000 ft HEA non-glare 3.125 in front or rear panel

inductive 1 amp - 120 VAC 0.5 amp - 240 VAC

ACCESSORIES 79380

weight: dimensions: input voltage range VDC: rotor type: power consumption nominal: bezel lighting: inclinometer ball / background color: connector number of pins: turn indication: operating temperature: operating altitude: glass: mounting:

1234T100-3A

CONTACT SETTING/ FACTORY SET AT: 3.1 - 7 PSI / 4 PSI 4 - 6 PSI / 5 PSI

1234T1003A 1234T1003T 1234T1007T 1234T1007A

MFR# 1234T100-3ATZ 1234T100-3TZ 1234T100-7TZ 1234T100-7ATZ

DESCRIPTION for Cessna C661004-0101 for Cessna C661031-0101

VOLTAGE/LIGHTED 10-32 volt / yes 10-32 volt / yes 10-32 volt / no 10-32 volt/ no

12

resistive: 15 amp - 6 VDC 8 amp -12 VDC 4 amp - 24 VDC

diaphragm: temperature range: connector: terminals: circuitry:

EDMO#

direct action blade contact silver alloy, gold plated factory set from 0.5 to 150 PSI 150 PSI for 0.5-24 PSI set point range, 250 PSI for 25-150 PSI set point range 500 PSI 750 PSI for 0.5 - 24 PSI set point range 1250 PSI for 25-150 PSI set point range

Extremely reliable, tried-and-true units, these 3-inch turn and slip indicators have a proven track record through HALT testing and OEM usage since 1999 and are a top choice for more than 15 aircraft companies. –– Certified to FAA TSO C3b –– OEM standard – proven reliability –– Power warning indicator –– 5, 14, 28v lighting

TURN & SLIP INDICATOR MID-CONTINENT INSTRUMENTS AND AVIONICS EDMO# 55508340N5 MFR# 55508340N5L This two-inch turn-and-slip indicator fits into tight panel spaces and is widely used in the turboprop market. –– Certified to FAA TSO C3b –– Compact 2.25-inch size saves panel space –– Internal 400 Hz AC brushless gyro spin motor with solid-state inverter –– Power warning indicator –– Internal lighting available 5, 14, or 28 volts –– Commercial and military qualified

1.800.235.3300 | edmo.com

269

Clocks, Instruments & Annunciators Turn Coordinators And Turn & Slip Indicators

weight: dimensions: input voltage: current input: temperature: altitude: humidity: vibration: certification: motor speed variation: mounting: connector:

SAM™ MD302 STANDBY ATTITUDE MODULE

1.5 lb 2.4 × 2.4 × 6.1 in 28 VDC 0.4 Amp –30°C to +50°C -100 to +35,000 ft 0 to 95% at 32°C 0.02 in dbl. ampl. 1.5 g @ 5-50 Hz TSO C3b 3% max front or rear panel 3-pin or 5-pin AN type

MID-CONTINENT INSTRUMENTS AND AVIONICS EDMO# MD302-1 MFR# 6420302-1

MD302 Horizontal

3-INCH TURN COORDINATORS MID-CONTINENT INSTRUMENTS AND AVIONICS

12

3-inch turn coordinator equipped with a brushless AC rotor powered by a solid-state inverter. This design results in less heat behind the panel and one of the top ratings in the industry at 4,800 hours MTBF. This instrument is a direct replacement for most 3-pin turn coordinators and is ideal for use in high-performance aircraft as well as cold-climate applications. –– Certified to FAA TSO C3b –– OEM standard—proven reliability –– Power warning indicator

weight: dimensions: input voltage range VDC: rotor type: power consumption nominal: bezel: inclinometer ball/background color: connector number of pins: turn indication: operating temperature: operating altitude: glass: mounting:

EDMO# 1394T1007Z 1394T10014

MFR# 1394T100-7Z 1394T100-14RB

MD302 Vertical

1394T100-7Z

1.2 lb 3.25 × 3.25 × 4.25 in 12-32 DC 0.35 A no black/white 3 standard 2-minute turn –30°C to + 50°C -1,000 ft to 35,000 ft clear 3-1/8 front or rear panel

DESCRIPTION

VOLTAGE/ LIGHTED

autopilot, S-TEC mod- 12-32 volt / no el 6405()L, brushless 11-32 volt / yes

Not finding what you need? If you don’t see the instrument you need, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we’ll have it in stock.

270

1.800.235.3300 | edmo.com

Attitude, altitude, airspeed, slip information and ARINC 429 output, all in one device. The MD302 or SAM™, by Mid-Continent Instruments and Avionics, is a 4-in-1, self-contained, solid-state instrument for use during normal operation or in case of primary instrument failure. It features selectable orientation (horizontal or vertical), which provides flexibility during the cockpit design and installation process. –– Displays attitude, altitude, airspeed, and slip information with ARINC 429 output –– Two-screen display has external, automatic and manual dimming control settings and provides smooth, high-definition graphics with extra-wide viewing angles and a user-friendly menu structure –– Users can configure the display and control the menu with the device’s single knob –– Easily programmable airspeed range markings –– Software is field-upgradeable via a standard USB port –– Uses 10-32 VDC power input and is also equipped with a self-contained, rechargeable Nanophosphate® lithium-ion emergency battery

weight: dimensions: power input: output: operating range:

units of measure: panel tilt: lighting: pilot interface: battery: technology: run time: mounting: mating connectors:

1.2 lb 3.25 × 3.25 × 4.25 in 10-32 VDC; 6W nominal, 25W max ARINC 429 attitude: 300 per second pitch, roll and yaw (max) altitude: -1,500 to +55,000 ft (-457 m to 15,764 m) airspeed: 20 to 500 knots (23 to 575 mph) (37 to 926 kph) altitude: feet or meters barometric setting: inches of mercury, millibars airspeed: knots, miles per hour or kilometers per hour configurable -10° to +90° pitch 5, 14, and 28 VDC input 16-detent, push and turn knob rechargeable, field-replaceable, internal battery Nanophosphate lithium-ion 60 minutes minimum when fully charged and properly maintained front panel mounted Mid-Continent p/n 9017646 kit contains custom DB15 connector with configuration module, pitot and static connectors

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Turn Coordinators And Turn & Slip Indicators

EDMO# certification:

EDMO# MD302-1 MD302-2 MD302-4 MD302-5

FAA TSO certified to C2d, C3e, C4c, C10b, C106, C113a, C179a, EASA ETSO certified to C2d, C3d (incomplete), C4c, C10b, C106, C113, C179a, RTCA DO-178B and DO-254 design assurance level (DAL) A, RTCA DO-160 qualified, RTCA DO-311 qualified

MFR# 6420302-1

DESCRIPTION

glass: MTBF: mounting: temperature range: mating connector: certification:

ROLL DIAL rotating

4200-10

The Lifesaver® 4300-series 3-inch attitude indicators provide one hour of emergency attitude reference in the event of aircraft power failure (non-battery back up versions are available, see table below). The 4300 series is designed for use as a primary or standby artificial horizon in fixed-wing aircraft and helicopters with a single connection that saves time in the installation process. The 4300 series provides 10-32 volt DC operation with anti-reflective glass, long-life lighting, and 7,500 4300-313 hours MTBF. –– Ideal primary or standby artificial horizon in fixed-wing and helicopter applications –– Single 4-pin connector installation for primary and optional standby battery models –– Lighted display with field-replaceable lighting –– Anti-reflective glass –– Custom versions available to match existing instrument/EFIS displays –– When ordering, indicate panel tilt and lighting voltage needed to ensure delivery of an appropriate unit. Other important information is aircraft type, display preference, whether the gyro is a standby indicator, and also to specify the primary indicator configuration.

power input:

4200-11

1.6 lb 5.94 in 10-32 VDC: 14 VDC input (1.4A max start, 0.51A running) 28 VDC input (0.6A max start, 0.24A running) rotating roll dial configuration, blue over brown Delta wing symbolic airplane aircraft specific—specify exact tilt between 0° and 20° internal LED lighting switchable to 5, 14, or 28 VDC input; wired through the main connector special HEA anti-reflective coating 2,500 hours rear mount in standard 2-inch MS33638 panel cutout -30°C to 70°C (-22°F to +158°F) MS3116F8-4S / 9015514 FAA TSO-C4c, RTCA/DO-160D/E

dial: lighting: glass: MTBF: mounting: temperature range: mating connector: certification:

EDMO#

10-32 VDC: 1400 mA start, 600 mA max. running at 14 VDC input 700 mA start, 300 mA max. running at 28 VDC inpuplt fixed roll dial, traditional symbolic airplane 5, 14, or 28 VDC incandescent; field-replaceable tray wired through main connector special HEA anti-reflective coating 7,500 hours rear mount in standard 3-1/8 in round panel cutout -30°C to 70°C (-22°F to +158°F) MS3116F8-4S / 9015514 FAA TSO-C4c, RTCA/DO-160D

MFR#

WT. /DIM. (LENGTH BEHIND PANEL)

SYMBOLIC AIRCRAFT

ROLL DIAL

Traditional/ 0 degree tilt Traditional/ 10 degree tilt Traditional

rotating

Delta wing

rotating

traditional

rotating

12

The Mini Gyro attitude indicator provides emergency attitude reference in the event of primary attitude failure. This TSO-approved indicator operates on 10-32 volt DC power with LED lighting selectable to 5, 14, or 28 volts while presenting a safe alternative to vacuum systems. The 4200 series is standard equipment on many OEM aircraft and aftermarket certifications. –– Single 4-pin connector installation –– Ideal standby artificial horizon in fixed-wing and helicopter applications –– Custom versions available to match existing instrument/EFIS displays –– 10-32 volt DC operation for use in 13 and 28-volt aircraft –– Anti-reflective glass enhances visibility and reduces fatigue –– Long-life LED lighting, user selectable to 5, 14, or 28-volt input

panel tilt: lighting:

SYMBOLIC AIRPLANE Delta wing

MID-CONTINENT INSTRUMENTS AND AVIONICS

internal battery; black bezel no battery; black bezel internal battery; gray bezel no battery; gray bezel

MID-CONTINENT INSTRUMENTS AND AVIONICS

dial:

MFR# 4200-11

LIFESAVER® 4300 SERIES ELECTRIC ATTITUDE INDICATOR, 3-INCH

4200 SERIES MINI GYRO

weight: dimensions: power input:

4200-11

LIFESAVER® WITH BATTERY BACKUP 4300-411/0 4300-41110 4300-412

4300-411/0 3.7 lb / 8.6 × 3.28 × 3.28 in 4300-411 3.7 lb / 8.6 × 3.28 × 3.28 in 4300-412 3.7 lbs / 8.6 × 3.28 × 3.28 in

rotating fixed

WITHOUT BATTERY BACKUP EDMO# 4200-10

MFR# 4200-10

SYMBOLIC AIRPLANE traditional

EDMO DISTRIBUTORS

ROLL DIAL rotating

4300-313

4300-313

4300-311

4300-311

2.7 lb / 6.6 × 3.28 × 3.28 in 2.7 lb / 6.6 × 3.28 × 3.28 in

1.800.235.3300 | edmo.com

271

Clocks, Instruments & Annunciators Turn Coordinators And Turn & Slip Indicators

EDMO#

MFR#

WT. /DIM. (LENGTH BEHIND PANEL)

4300-31111

4300-311

4300-41110

4300-411

2.7 lb / 6.6 × 3.28 × 3.28 in 3.7 lb / 8.6 × 3.28 × 3.28 in

SYMBOLIC AIRCRAFT

ROLL DIAL

traditional/ 11 degree tilt traditional

rotating rotating

ACCESSORIES 36023 36022 TT43 9015607 9016909 9015640-10 9015640-12 9016909-14 9016909-5

36023 36022 TT43

slip indicator for 4300 series knob cover TT43 battery tester and charger for 4300 series *The TT43 is compatible with TS420 emergency power supply. For more information, page 326). 9015607 Standby Battery 9016909 28 V LED light tray 9015640-10 5V NVG light tray 9015640-12 28V NVG light tray 14V LED light tray 28V LED light tray

DIRECTIONAL GYRO - ELECTRIC MID-CONTINENT INSTRUMENTS AND AVIONICS

12

EDMO# 3300-10 MFR# 3300-10 The 3300-series directional gyros are designed with advanced circuitry that withstands high vibration while requiring less than half the power of standard directional gyros, and a power input of 10-32 volt DC, this series can be used in any aircraft. The 3300-series is equipped with long-life LEDs and a sharp, backlit display –– Provides RTCA DO-160E HIRF immunity, making it an ideal replacement for heavy, older AIM and RC Allen units

weight: dimensions: power input: current rating: lighting: color: glass: MTBF: mounting: temperature range: mating connector:

272

1.9 lb 4.65 in 10-32 VDC 14 VDC, start: 1.4A max., run: 0.44A nominal 28 VDC, start: 0.6A max., run: 0.22A nominal internal LED lighting user selectable to 5, 14, or 28 VDC input with adjustable brightness index marks, text , symbolic airplane, logo: white bezel, dial background: black power/speed warning flag: red special HEA anti-reflective coating 2,500 hours rear panel mount in standard 3-1/8 inch round panel cutout -40°C to +55° (-40°F to 130°F) MS3116F8-4S / 9015514

1.800.235.3300 | edmo.com

SAI 340 QUATTRO FOUR IN ONE STANDBY INSTRUMENT SANDIA AEROSPACE

EDMO# 706171-00 The SAI 340 Quattro is a fourin-one standby instrument that provides precision airspeed, attitude, altitude, and slip indications in an easy to read EFIS presentation with smooth, high-quality graphics. The Quattro makes a great addition to a traditional six pack panel and it is a cost-effective way to replace steam gauge standby instruments in retrofit EFIS-equipped aircraft. Additionally, the Quattro has a built-in battery that provides up to two hours of standalone operation if needed—thus ensuring an added level of redundancy. –– Displays precision airspeed, attitude, altitude, and slip in an EFIS presentation –– Excellent replacement for steam gauge standby instruments in retrofit EFIS equipped aircraft –– Backup lithium battery provides up to 2 hours battery life –– Fits a 3-inch panel hole –– Weighs just over 8 ounces

weight: dimensions: electrical: environmental: battery: certification (pending):

0.51 lb 3.52 × 3.25 × 1.4 in input voltage: 10-32 Vdc current: 2A max temperature: -20° to +55°C altitude: -1500 to +35,000 ft airspeed: 20-400 Kts Li-Poly 30 minutes minimum Sandia Aerospace 2 hours nominal TSO-C2d (type B), TSO-CSe, TSO-C4c, TSO-C10b (Type I), TSO-C113a, TSO-C201 (A5 HX T7), RTCA DO-347, DO 178C (Level C), DO 160G

The iCloth: a screen-cleaning solution. iCloth® wipes keep glass surfaces in the panel free of dust, streaks, fingerprints, and static with aviation grade Dupont™ Sontara® fabric. See parts ICA24, IC100, and ICA500 on page 124.

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Annunciator Control Units

ANNUNCIATOR CONTROL UNITS MD41 ANNUNCIATION CONTROL UNITS MID-CONTINENT INSTRUMENTS AND AVIONICS The MD41-series annunciation control units (ACU) are small, self-contained units that display status annunciation received from NAV and GPS systems. They MD41-1510 are each equipped with a daylight-readable display with dual 20,000-hour photocell lamps, internally lighted selection switches, and automatic photocell dimming. Simple to install, the MD41 units use a single cutout and D-subminiature connector (panel punches are available). –– Horizontal and vertical configurations available in 14- or 28-volt units –– Available in two sizes: 0.75 × 2.45 × 2.5 or 0.8 × 2.73 × 3.2 in –– D-subminiature connector and single cutout for simple, cost-effective installation –– Terrain awareness and warning system versions are TSO C151a certified –– Meets RTCA DO-160D environmental specifications (certified to 55,000 ft) EDMO#

MFR#

FOR USE WITH

HORIZONTAL MOUNT ORIENTATION 14 VOLT MD41-1484W

MD41-1484W Garmin GNS 430W, 530W

28 VOLT MD41-1408A MD41-1488W

MD41-1408A

Garmin GPS400, GNC420, GPS430, GPS500, GS530 MD41-1488W Garmin GNS 430W, 530W

HORIZONTAL MOUNT ORIENTATION 14 VOLT MD41-1512

Garmin GTN 650, GTN 750

MD41-1510 MD41-1514

Garmin GTN 650, GTN 750 Garmin GTN 650, GTN 750

28 VOLT MD41-1510 MD41-1514

VERTICAL MOUNT ORIENTATION 28 VOLT MD41-1408C

MD41-1408A

Garmin GPS 400/500, GNC-420/520, GNS430/530

More configurations are available. Call EDMO at 1.800.235.3300 for more information.

MD41-1948 SATCOM ACU FOR AVIATOR 200, 300, 350 MID-CONTINENT INSTRUMENTS AND AVIONICS

EDMO# MD41-1948 MFR# MD41-1948 The MD41-1948 is a Satcom Annunciation Control Unit that works with the Aviator 200, 300, and 350 systems. This device provides the inputs and annunciations described in the Aero-SB Lite installation manual, displays the connectivity status of SBU, and gives the flight crew on/off capabilities for the SB-Lite and or the Wi-Fi from the cockpit or cabin console (which eliminates the need to cycle breakers). These devices are also equipped with

EDMO DISTRIBUTORS

weight: dimensions: voltage input: current input: temperature: altitude: certification:

0.3 lb 0.8 × 2.73 × 3.2 inches 28 VDC 0.3 amps –55°C to +70°C 55,000 ft RTCA DO-160D

WAAS GPS ANNUNCIATOR PANEL DEKLIN TECHNOLOGIES, INC EDMO# DWA2000 MFR# DWA2000 The DWA2000 is a self-contained WAAS GPS Annunciator Panel for 14 and 28 Vdc aircraft and replaces the DWA 1000. The DWA2000 is easy to install and displays annunciation status from GPS receivers that output discrete signals for remote annunciation purposes.

weight: dimensions: operating temperature: survival temperature: humidity: altitude: connector: input specifications: interface specifications:

2 oz 2.5 × 0.72 × 0.35 in -55°C to +70°C -55°C to + 85°C 95% 50,000 ft max 12 pin DO-160E input voltage: 11-33 Vdc current: 0.170 amps max (@27.5 VDC) fuse/circuit breaker rating: 0.5 amps A+: red, 11-33 Vdc ground: black airframe ground manual lamp test: white/blue - requires ground low manual lamp dim: white/red - requires ground low (the following require a logic low to annunciate) VLOC: brown GPS blue MSG: violet WPT: orange TERM: yellow APR: white LOI: green OBS: gray

1.800.235.3300 | edmo.com

12

MD41-1512

a 10,000-hour lamp with automatic photocell dimming and sunlight-readability. –– Compatible with the Thrane & Thrane Aviator 200, Aviator 300, and Aviator 350 systems –– Sunlight-readable display with a 10,000-hour lamp with automatic photocell dimming –– Horizontal alignment (vertically aligned versions available) –– D-subminiature connector and single cutout for simple, cost-effective installation

273

Clocks, Instruments & Annunciators Speed & Altitude Indicators

SPEED & ALTITUDE INDICATORS

VOR INDICATORS 903ID DIGITAL VOR LOCALIZER & STATION IDENTIFIER

MD25 AIRSPEED INDICATOR

DAVTRON INC

MID-CONTINENT INSTRUMENTS AND AVIONICS EDMO# MD25-20028 MFR# MD25-20028 Lightweight, compact, 2-inch indicator intended for a wide range of GA and business aviation aircraft.

dimensions: voltage: airspeed range: lighting type:

2 in 28V 40-200 knots LED

3-1/8 IN VERTICAL SPEED INDICATOR UMA INC

12

EDMO# 8-310-60 The UMA 3-1/8 inch airspeed indicator is designed for fixed wing aircraft with a reciprocating or turboprop engine. Black and white dial.

8-310-20

weight: range: dial name: max altitude: temperature range:

274

weight: input voltage: input signal: supply current: operating temperature range: DVOR accuracy:

8.8 oz ±6000 ft/min vertical speed 25,000 ft -55° to +85°C

EDMO#

MFR#

8-310-20 8-310-60

8-310-20 8-310-60

The Davtron 903ID is a compact, computer-based instrument with a DVOR feature that digitally reads the aircraft’s radial position from the VOR station. The radial position is displayed and updated every 0.8 seconds and makes VOR step down fixes and intersections easy to read 903ID-1 at a glance while the instantaneous to/from switching capability makes the 903 a fast, efficient way to obtain VOR cross-checks. The localizer mode displays course deviation numerically with the equivalent resolution of a 1/2 dot of a CDI. In addition, the 903ID takes the Morse code identifier signal of the VOR station and sequentially displays the station letters on the single alpha-numeric 903ID-2 display at a readable rate. This device features two toggle switches on the front; the first allows the user to select NAV1 or NAV2 and the second provides To or From bearing selections. During the install process, the user can calibrate the 903ID using a small push-button switch that, when pressed, allows the unit to become a signal level meter—this functionality removes the need for an external signal level meter during the installation process. –– Automatic VOR position orientation –– Localizer deviation and centerline –– Alphanumeric station identifier –– Instant to/from switching –– Digital filtering and signal processing –– Sunlight readable incandescent display with automatic dimming –– Serial ASCII output of station and radial OFF flag

FT/MIN 0-2000 0-6000

TSO yes no

1.800.235.3300 | edmo.com

EDMO# 903ID-1 903ID-2

MFR# 1114-903ID-1 903ID-2

6 oz 14 to 28 volt 0.35 to 10 volts 0.3 amps -20°C to +55°C +/-2 degrees

MOUNT TYPE rectangle mount round mount

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Compasses

COMPASSES PAI-700 VERTICAL CARD COMPASS PRECISION AVIATION INC The primary advantage of the PAI-700 vertical card magnetic compass over fluid-damped compasses is that it provides an easy-to-steer by presentation with an aero designed lubber line on the lens that allows the pilot to view the entire 360-degree dial in its proper relation to flight. –– Satisfies FAA requirement that each aircraft must have a magnetic compass –– The magnet-driven design has reduced lead and lag than other similar models due to eliminated pendulosity –– Naturally occurring, built-in eddy current damping makes the design inherently stable EDMO# PAI-700/14 PAI-700/28 PAI700/28N

MFR# PAI-700 PAI-700 PAI-700/28 NVG

VOLTAGE 14 V 28 V 28 V with NVG compatible display

SOUTHERN HEMISPHERE PAI70014SH PAI70028SH

PAI-700 PAI-700

14 V 28 V

ACCESSORIES PACMG-2

PACMG-2

PMO-U

PACMO-UN

PACMO-APZ21N

PMO-CES2 PMO-PIPERN PMO-VMN

PACMO-CESNO2 PACMO-PIPERN PACHO-VMN

PAI-LIT/28

PAI-28V

VOLT METERS DAVTRON INC The Davtron 450 and 451-series voltmeters are small, lightweight instruments that precisely monitor aircraft voltage so that the pilot can more accurately gauge the amount of capacity remaining in the battery when there is a low voltage condition. The 475VA and 475VAA series were designed for low current drain and are designed for use in standby and emergency battery packs for reading voltage and current flows.

450-SERIES –– Lightweight and requires minimum panel space –– Automatic dimming, sunlight readable display –– Laser engraved faceplate –– Voltage with flashing alarm –– FAA-PMA approved

range: input voltage: resolution: input current: operating temp: accuracy:

8 – 32 volts 14 to 28 volts 0.1 volt 150 mA max. -25°C to 60°C +/- 1% of full scale

451-SERIES –– Lightweight and requires minimum panel space –– Automatic dimming, sunlight-readable display –– Voltage (remote option available) –– FAA-PMA approved

12

PMO-APZ21N

Universal glare shield mounting bracket for aircraft that utilize a glare shield or deck mount. Universal mounting bracket with vertical hanger that can be bent forward or aft to the desired angle. Holes can be drilled where needed. Once installed, the compass face should be parallel to the instrument panel. Mounting bracket for Apache, Aztec, Cessna 414/421 with windscreen mount. mounting bracket for PACMO CESNO II mounting bracket for Piper mounting bracket for Mooney, vertical mount 28V light assembly

INSTRUMENT ACCESSORIES

More mounting brackets available; call 1.800.235.3300 for more information.

Not finding what you need? If you don’t see the instrument you need, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we’ll have it in stock.

range: input voltage: resolution: input current: operating temp: accuracy:

8 – 32 volts 14 to 28 volts 0.1 volt 150 mA max. -25°C to 60°C +/- 1% of full scale

475-SERIES –– –– –– –– –– –– ––

EDMO DISTRIBUTORS

Low current drain 0.001 amp Plus or minus 150.0 amp range Remote option available Sunlight readable display One tenth amp resolution One tenth volt resolution FAA-PMA approved

1.800.235.3300 | edmo.com

275

Clocks, Instruments & Annunciators Cooling Fans

EDMO# range: input voltage: resolution: input current: operating temp: accuracy:

8 – 32 volts 14 to 28 volts 0.1 volt 150 mA max. -25°C to 60°C +/- 1% of full scale

EDMO#

MFR#

DESCRIPTION

AMTR 3/16

MFR#

DESCRIPTION

AEROMETER 3/16” KIT

3/16-inch install kit

COOLING FANS

450-SERIES 450 450-GRN 450-WHT 450A 450A-GRN

1018-450 1018.1-450-GRN 1018.2-450-WHT 1019-450A 1019.1-450A-GRN

amber LED green LED white LED amber LED/remote sensing voltmeter/green LED/remote sensing

1023-451

1.25 round mount

1025.2-475VA-14V 1025.3-475VA-28V 1028-475VAA-14V 1029-475VAA-28V

2 function DC volts & amps/14 V 2 function DC volts & amps/28 V DC volts/battery amp/ALT amps/14 V DC volts/battery amp/ALT amps/28 V

ACF 314 & 328 COOLING FANS SANDIA AEROSPACE

451-SERIES 451

475-SERIES 475VA-14V 475VA-28V 475VAA-14V 475VAA-28V

ACF314

INOPERATIVE INSTRUMENT COVER

12

H C WARD, CO.

EDMO# 0601 MFR# 0601 Plastic instrument cover that masks the face of most general aviation flight instruments. Attaches to the instrument face with a suction cup. This cover is useful in training situations involving partial panel work and as a safety aid for masking non-functional instruments. –– Includes two covers

HOURMETER AIRSPEED SWITCH/STC FLOATS ALASKA, LLC.

EDMO# AEROMETER MFR# AEROMETER The Aerometer tracks time in service by electronically activating an existing hourmeter when the forward motion of the aircraft exceeds 27 mph IAS. In this way, the Aerometer accurately tracks aircraft time in service, without tracking time spent taxiing, warming up, or waiting for clearances. This device is designed for light aircraft and comes with a complete kit; installation is quick—under two hours—and does not require structural or sheet metal modifications. See manufacturer’s website for compatible aircraft models. EDMO# AEROMETER

MFR# AEROMETER

ACF528

The ACF 314 and ACF 328 are 3-port cooling fans with the ability to cool up to three avionics units and the capacity to cool up to 20 cubic feet of air per minute. The ACF 314 and ACF 238 operate on 14 VDC and 28 VDC respectively using a high-quality, brushless blower motor and or RunQuiet technology. The ACF 528 is similar to the ACF 314 and ACF 328 but is equipped with five ports and the ability to cool up to five avionics units while operating on 28 VDC.

weight: dimensions: operating voltage: current draw: certification:

EDMO# ACF314 ACF328 ACF528

1.18 lb 5.92 × 5.18 × 2.1 in ACF314: 14 VDC ACF328: 28 VDC ACF314: 960 mA (1.7 A at startup) ACF328: 480 mA (0.85 A at startup) FAA-PMA

MFR#

VOLTAGE

PORTS

ACF314 ACF328 ACF528

14 28 28

3 3 5

DESCRIPTION Hourmeter Airspeed Switch

ACCESSORIES AMTR 1/4

276

AMTR 1/4

1/4-inch install kit

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Clocks, Instruments & Annunciators Cooling Fans

SAFE 128 & 328 COOLING FANS SANDIA AEROSPACE

SAFE 128

SAFE 328

The SAFE series cooling fans are axial fans that attach directly to an avionics unit’s cooling port. These fans provide a nominal 20 CFM of cooling air and an alert output whenever the fan RPM drops below a preset level. The SAFE series uses a high quality, brushless blower motor and or RunQuiet technology.

weight: dimensions: operating voltage: current draw: certification:

EDMO# 305468-00 305467-00

SAFE 128: 0.25 lb SAFE 328: 0.7 lb SAFE 128: 2.36 × 2.87 × 1.44 in SAFE 328: 5.58 × 4.75 × 1.25 in 22-31 VDC SAFE 128: 100mA nominal < 0.250 mA startup SAFE 328: 400mA nominal < 0.550 mA startup FAA-PMA

MFR# 305468-00 305467-00

MODEL # SAFE 128 SAFE 328

VOLTAGE 28 28

12

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY. EDMO carries a wide range of products, including custom options, so if you’re not finding what you need, give us a call at 1.800.235.3300 or visit edmo.com. We’re constantly updating our inventory so there’s a good chance we will have what you’re looking for.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

277

Just the right fit. ELTs for every job.

LEFT TO RIGHT: EMERGING LIFESAVING TECHNOLOGIES 406GPS ELT, ARTEX ELT 3000, ACK E-04 ELT, ARTEX ELT 345, MCMURDO KANNAD INTEGRA ELT

FEATURED PRODUCT LINE: ELTS When it comes to ELTs, selection is important. No one ELT fits the parameters of every install job, budget, or aircraft. That’s why EDMO Distributors maintains a wide range of ELT options—to serve the unique needs of each customer. For fast installs, EDMO carries options like the versatile cost- and space-saving Artex ELT 345 and the newly released Artex ELT 3000, the smallest, lightest tri-frequency ELT with a built-in GPS interface (ARINC429 or RS 232). Conversely, some customers may require units like the McMurdo Kannad Integra ELT or the 406 ELT from Emerging Life Saving Technologies; ELTs that provide robust options like internal GPS devices, GPS antennas, or GPS nav interface backup systems. No matter the job, EDMO has the right ELT. Visit us at edmo.com or speak to our sales staff at 1.800.235.3300 and be sure to request a copy of our ELT product line brochure with an included ELT battery reference poster.

CHECK OUT OUR FULL RANGE OF ELTS & ACCESSORIES IN SECTION 8.

Air Data & Fuel Flow

Air Data Attitude Heading System..................................................................... 280 Air Data Computer Systems.............................................................................. 280 Air Data Converters & Adapters........................................................................ 281 Modular Accessory Remote Cards & Enclosures............................................. 285

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

279

Air Data & Fuel Flow

Air Data Attitude Heading System

AIR DATA ATTITUDE HEADING SYSTEM

AIR DATA COMPUTER SYSTEMS

ATTITUDE/HEADING REFERENCE SYSTEM (ADAHRS)

ADC-2000 FUEL/AIRDATA COMPUTER

GENESYS AEROSYSTEMS

The F/ADC-2000 Fuel/ Airdata computer provides real-time flight information by creating an interface between the aircraft GPS receiver and the aircraft’s flight management system. This device interfaces with nearly every major GPS and flight management system and automatically calculates real-time fuel usage, TAS, true air temperature, OAT, barometric pressure correction, density altitude, and wind aloft without the need for manual data entry. This information is then displayed via the on-board NAV system, EFIS, and TAWS. –– Supports nearly every major GPS –– Provides a standard ARINC 429 driver board with switch selectable output to drive most standard 429 systems –– Options available for baro-corrected altitude; pressure altitude data provided by the F/ADC-2000 can be automatically used by most GPS manufacturers as a substitute for fourth satellite data when computing three-dimensional position (24-hour, 3-D position accuracy with only three satellites) –– Equipped with a 55,000 ft, high-resolution encoder

The digital air data and solid-state attitude/heading reference system (ADAHRS) incorporates a magnetic sensing unit (MSU) and a separate outside air temperature (OAT) probe. This system relies on the latest micro-electro-mechanical system (MEMS) technology to provide extremely precise digital output and referencing of aircraft position rate vector, and acceleration data. –– Light, three-component product suite weighs less than 1.5 lb –– Reliable DO-178B, level A software

weight: dimensions: input voltage: connector type: temperature range: body rates: velocity range: velocity resolution: velocity accuracy: attitude range/resolution: OAT calibration range: OAT accuracy:

13

approvals:

0.97 lb (ADAHRS) 0.40 lb (magnetometer) 0.13 lb (OAT probe) 2 × 2.5 × 3.9 in nominal 14 to 28 V dual bus (80 V max, 10 V min) MIL-C 28999 Souriau PN: 8D0c-13F35PN/airframe side: Souriau PN: 8D5-13F35SN -55° to +70°C ±200° per second 20-550 KIAS 0.2KIAS below 25KIAS / 0.1KIAS 25KIAS and above ±5.0KIAS below 50KIAS, Meets or exceeds TSO-C106 from 50 to 450 KIAS ±5.0KIAS above 450KIAS -1,000 MSL to FL550/1 ft (meets or exceeds TSO-C106) 70°C to +100°C (0.1°C resolution) ±1.5°C from -70°C to +70°C (per TSO-C106) ±2.5°C from +70°C to +100°C RTCA/DO-178B, level A

EDMO# 4200200101 4200200301 4200400101 4200500101

MFR# 42-002001-0001 42-002003-0001 42-004001-0001 42-005001-0001

SHADIN LP

weight: dimensions: input power: operating temperature: operating altitude: input:

DESCRIPTION Outside Air Temperature - OAT probe oat install kit magnetic sensing unit air data attitude heading reference system

output:

output format:

Not finding what you need? If you don’t see the product you need, check out our website at edmo.com or give us a call at 1.800.235.3300 parts and pricing information. We’re constantly updating our inventory with our manufacturers’ latest products, so there’s a good chance we’ll have it in stock.

environmental: software: TSO category:

EDMO# 962830-1A 962830-2A 962830-3A

280

1.800.235.3300 | edmo.com

2.25 lb 7.4 × 4.3 × 3.9 in (including mounting rack) 9-35 VDC, 1 watt nominal -20° to +55°C up to 55,000 ft pitot pressure static pressure outside air temperature heading synchro baro correction fuel flow auto baro corrected Alt., altitude blind encoder output, airdata output on ARINC 429 buss, IAS, TAS, mach, P.Alt., D.Alt., OAT, TAT, wind aloft, fuel flow, L. Fuel Used, R. Fuel used, RS-422/RS-232 ARINC 429 lo/high speed ARINC 565 AC TAS RTCA DO-160B RTCA DO-178A, level II C-106, C-44a, C-88a

MFR# 962830-1A 962830-2A 962830-3A

DESCRIPTION high level IF baro corrected altitude baro corrected altitude

FUEL SENSOR TYPE digital sine wave DC

EDMO DISTRIBUTORS

Air Data & Fuel Flow

Air Data Converters & Adapters

EDMO#

MFR#

DESCRIPTION

FUEL SENSOR TYPE

represents the engine fuel flow and can be used with standard fuel management system.

962830A1S4 962830A-1-S-4 Quick Start capability, MS digital connector, and install kit

ACCESSORIES IK9630-1 681201-1

IK9630-1 681201-1

ADC-2000 install kit OAT temperature probe assembly kit

SAC 7-35 AIR DATA COMPUTER SANDIA AEROSPACE The SAC7-35 Airdata Computer for General Aviation is actually four systems in one; it provides an altitude encoder, altitude alerting, fuel flow, and an airdata computer. The SAC 7-35 705548-00 is an FAA TSO approved altitude encoder that provides RS-232 data for newer generation transponders as well as standard Gilham Grey code for legacy transponders. The system is also equipped with SANDIA’s Altitude Inflight Monitoring (AIM) that alerts the pilot whenever the aircraft deviates 100 feet or more from the selected altitude. When paired with a fuel flow transducer (two for a twin), the SAC 7-35 provides all of the fuel flow data required by navigation systems to monitor fuel flow. The SAC 7-35 is also a fully TSO’d airdata computer with multiple interface formats that provide data to a wide variety of avionics systems. –– Includes: tray connectors, OAT probe, and install manual

weight: dimensions:

EDMO# 705548-00 705548-01

1.18 lb 5.62 × 4.87 × 1.89 in

MFR# 705548-00 705548-01

DESCRIPTION SAC7-35 air data computer SAC7-35 air data computer (supports ADS-B with the TDR94D and Garmin navigators

weight: dimensions: power supply voltage: supply current: protection: input (two, one per engine: frequency FF output (two, one per engine) digital frequency signal output: operating temperature: operating altitude: certification: environmental:

0.4 lb 2.4 × 4.3 × 1.15 in +14 to +28 VDC 70 mA at 28 VDC not internally fused DC input voltage range: 0 – 10 V input impedance: >100 MΩ VOL < 0.8 V: IMAX=15 mA VOH = 5 V: IMAX=15 mA pulse width (VOL): 0.4 ms max. frequency, VIN=10 V: 1,221 Hz -30° to +55°C -1,000 to 55,000 ft TSO-C44b RTCA/DO-160C

CONVERTER FOR RS232 TO RS422/RS422 TO RS232 SHADIN LP

EDMO# 930510 MFR# 930510 The RS232 to RS422/RS422 to RS232 converter takes serial data in either RS-232 or RS-422 format and converts it to RS-422 or RS-232 format respectively. This converter accepts any serial data format and converts data simultaneously as a bi-directional level translator with two independent converter channels. –– Inputs: RX RS-232 serial data, RX RS-422 serial data –– Outputs: TX RS-232 output serial data, TX RS-422 output serial data

ACCESSORIES 305580

SAC7-35 programming/adapter cable

AIR DATA CONVERTERS & ADAPTERS DC FUEL FLOW TO FREQUENCY CONVERTER SHADIN LP

EDMO# 630502 MFR# 630502 This device receives analog fuel flow (FF) signal as DC voltage and produces a digital output signal with a frequency proportional to the FF signal. The digital output

EDMO DISTRIBUTORS

weight: dimensions: power supply voltage: supply current: protection: inputs/outputs: operating/storage temperature: operating altitude: certification:

0.4 lb 1.15 × 4.3 × 2.4 in +28 VDC 30 mA at 28 VDC not internally fused RS-232 or RS-422 / RS-232 or RS-422 -20° to +55°C / -55° to 85°C up to 55,000 ft TSO-C44b

13

305580

AIS-360 ARINC 429 ADAPTERS SHADIN LP

LS/HS ADAPTER The AIS-360 ARINC LS/HS Adapter has two ARINC 429 low-speed input channels and two ARINC 429 high-speed output channels. The AIS360 receives any label on the ARINC 429 low speed input and outputs it on an ARINC

1.800.235.3300 | edmo.com

833610-01

281

Air Data & Fuel Flow

Air Data Converters & Adapters 429 high-speed bus with up to 440 μsec delay. During this process the label data is not changed and the update rate remains the same in the conversion.

BUFFER/ISOLATOR The AIS-360 ARINC buffer has two ARINC 429 input channels and two ARINC 429 output channels. This unit receives any label on the ARINC 429 low speed input and outputs it on an ARINC 429 low speed bus. Any label received on the ARINC 429 high-speed input is output on the ARINC 429 high speed output. Label data and update rate remain unchanged.

weight: dimensions: power supply voltage: supply current: protection: inputs:

(Buffer) ARINC 429: low speed, 12-14.5 Kbps ±1% ARINC 429: high speed, 100Kbps ±1% (LS/HS adapter) ARINC 429: high speed, 100Kbps ±1%

outputs:

operating/storage temp: operating altitude: certification:

EDMO# 833610-01 833610-02

0.9 lb 8.5 × 4 × 1.59 in +18 VDC to +33 VDC 100 mA max not internally fused (LS/HS adapter) ARINC 429: low speed, 12-14.5 Kbps ±1% ARINC 429: high speed, 100Kbps ±1%

MFR# 833610-01 833610-02

(Buffer) ARINC 429: low speed, 12-14.5 Kbps ±1% ARINC 429: high speed, 100Kbps ±1% -15°C to +70°C / -55°C to +85°C up to 50,000 ft RTCA/DO-160F

weight: dimensions: power supply voltage: supply current: protection: inputs: ARINC 429: 26 VAC reference CH1,CH3: discrete input (ARINC 763-3):

1.7 lb 8.5 × 4 × 2.5 in +18 VDC to +33 VDC 520 mA max (745 mA max including external loads) active current limiting to 2.0 amps high speed, 100 Kbps ±1% 24.7 VAC to 27.3 VAC active: low/ground signal V < 3.5 VDC with I<20 mA sink or R < 10Ω Inactive: high/open signal 18.5 VDC < V < 36 VDC or R > 100K Ω

outputs: ARINC 429: synchro-X, Y, and Z (ARINC 407) (heading, pitch and roll): synchro angle accuracy: synchro-valid-CH1, CH2, and CH3:

high speed, 100 Kbps ±1% 0 to 11.8 VAC typical, 12.4 VAC max 0.209 VA into 500Ω each channel input angle ±0.5° +28 VDC (valid) / open (invalid) discrete, 75 mA max short circuit protected 200mV/Deg

alternate 2-wire synchro (ARINC 561) (pitch and roll) operating/storage temperature: operating altitude: certification:

-40°C to +70°C / -55°C to 85°C

EDMO#

up to 55,000 ft TSO-C4c, TSO-C5f, TSO-C6e “incomplete system”

MFR#

834510-00

834510-00

834511-00

834511-00

DESCRIPTION

DESCRIPTION ARINC 429 heading, pitch, and roll to 3-channel ARINC 407 synchro ARNC 429 heading to single channel ARNC 407 synchro

LS / HS adapter buffer / isolator / HS TO HS / LS TO LS

A-429 HS/LS TO SERIAL CONVERTER WITH SM SELECT

13

AIS-450 ARINC 429 ADAPTERS

282

SHADIN LP The AIS-450 is a digital to synchro-based converter that receives angular data (heading, pitch, and roll) on two highspeed ARINC 429 inputs and converts it to three ARINC 407 synchro outputs (3-wire). The two ARINC 429 inputs accept only angular ARINC 429 labels for heading, pitch, and roll (ARINC 314, 320, 324, and 325). The high-speed ARINC 429 outputs pass through only the valid angular ARINC 429 labels received on the inputs. The three ARINC 407 outputs are configured as a 3-wire synchro. –– Current AIS 450 hardware capabilities: digital I/O, 3 channel ARINC 407 3-wire synchro out, discrete I/O –– Common applications: –– ARINC 429 labels 314 or 320 to synchro heading output –– ARINC 429 labels 314 or 320, 324, and 325 to synchro heading, pitch, and roll output –– ARINC 429 to ADF, DME synchro –– ARINC 429 or serial to selected course waypoint bearing –– Serial to synchro

1.800.235.3300 | edmo.com

SHADIN LP

EDMO# 933612-02 MFR# 933612-02 The A-429 high speed to low speed serial converter with SM select accepts the following ARINC 429 input labels on the ARINC 429 input bus and ignores all other labels which may be contained in the input: 074, 075, 113-116, 147, 251, 300-307, and 310-313. Designed for use on Honeywell NZ2000 Moving Map System.

weight: dimensions: input voltage / current: ARINC 429 input labels: flight plan data: high/low select: outputs: operating temperature: storage temperature: altitude: certification:

0.6 lb 3 × 3.2 × 3.2 in +14 to +28 VDC / 100 mA 114, 115, 116, 147, 251, 310, 311, 312, 313, 275 074, 075, 113, 300-307 open = high speed, GND = low speed RS-232 or RS-422 serial data -20°C to +55°C -55°C to +85°C up to 55,000 ft TSO-C129a Class A1

EDMO DISTRIBUTORS

Air Data & Fuel Flow

Air Data Converters & Adapters SYNCHRO HEADING INPUT/ARINC 429 CONVERTER

SHADIN FUEL FLOW INDICATORS

SHADIN LP

The Shadin Miniflo, Digiflo, and Microflo fuel flow indicators display real time fuel flow with up to ±1% accuracy for maximum fuel efficiency. When interfaced with an engine’s fuel transducer and a GPS, these devices display fuel used, fuel remaining, endurance, efficiency, fuel to destination, and fuel reserve. Each is equipped with an LED seven-segment display that can be toggled between different data fields. These devices are capable of transmitting fuel information to Bendix/King KLN-88, KLN-90, and Garmin GPS navigation receivers.

EDMO# 933753-00 MFR# 933753-00 The Synchro Heading Input to A-429 Converter accepts the magnetic heading (ARINC 407 3-wire synchro data inputs) and converts to A-429 low speed output label 320.

weight: dimensions: input voltage / current: input data:

0.4 lb 1.15 × 4.3 × 2.4 in +28 VDC / 150 mA magnetic heading ARINC 407 3-wire synchro (reference 26 VAC 400Hz excitation 11.8VL-L) output data: ARINC 429 LS data magnetic heading, label 320 categories: testing pending operating temperature: -55°C to +70°C storage temperature: -55°C to +85°C altitude: up to 55,000 ft

SYNCHRO TO ARINC-429 HIGH SPEED CONVERTER SHADIN LP

EDMO# 933800-24 MFR# 933800-24 The Synchro to ARINC 429 highspeed converter can be used whenever Synchro to ARINC 429 high-speed conversion is required. The purpose of this unit is to receive three 3-wire Synchro ARINC 407 inputs: pitch, roll, and magnetic heading. Received labels are then converted to ARINC 429 high speed.

output data:

operating/storage temperature: operating altitude: approvals:

1.5 lb 8.562 × 3.305 × 3.68 in rack +28 VDC or 26 VAC 400 Hz 300 mA at 28 VDC not internally fused magnetic heading, ARINC 407 3-wire Synchro Pitch, ARINC 407 3-wire Synchro Roll, ARINC 407 3-wire Synchro Heading reference 26 VAC 400Hz excitation 11.8VLL ARINC 429 high speed labels: 320 (magnetic heading) 324 (pitch) 325 (roll) -20°C to +55°C / -55°C to +85°C up to 55,000 ft RTCA/DO-160C

DIGIFLO Constant fuel rate, fuel used, fuel remaining, endurance (hours and minutes until fuel exhaustion), Add/Full switch for one touch fueling, low fuel warning (by time). Added feature for twin models: left engine fuel used, right engine fuel used.

DIGIFLO-L Communicates with most GPS receivers. Constant fuel flow rate, fuel used, fuel remaining, endurance (hours and minutes until fuel exhaustion), fuel to destination, fuel remaining upon reaching your destination, nautical miles per unit of fuel, low fuel warning (by time), Add/Full switch for one touch fueling. Fully STC’d.

Digiflow

MINIFLO Low flat pack profile allows ease of installation in almost any panel configuration. Constant fuel flow rate (combined rate in left window for twins, with the capability of displaying individual engine flow rates at the touch of a button), fuel used, fuel remaining, endurance, low fuel warning (by time), Add/Full switch for one-touch fueling.

Miniflo

MINIFLO-L Communicates with most GPS receivers. Constant fuel flow rate (combined rate in left window for twins, with the capability of displaying individual engine flow rates at the touch of a button), fuel used, fuel remaining, endurance, low fuel warning (by time), fuel to fuel, add/ full switch for one touch fueling.

13

weight: dimensions: mounting: power supply voltage: supply current: protection: input data:

SHADIN LP

MICROFLO 2-1/4-inch face with short body design allows for easy installation in existing precut panels. Red dot matrix LED display, constant fuel flow rate (combined rate in left window for twins, with the capability to display individual engine flow rates at the touch of a button), fuel used, fuel remaining, endurance, low fuel warning (by time), Add/Full switch for one touch fueling.

MICROFLO-L

Microflo

Communicates with most GPS receivers. Red dot matrix LED display, constant fuel flow rate (combined rate in left window for twins, with the capability to display individual engines flow rate at the touch of a button), fuel used, fuel remaining, endurance, low fuel warning (by time), Add/Full switch for one-touch fueling, fuel to destination, fuel in reserve upon reaching destination, nautical miles per unit of fuel spent.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

283

Air Data & Fuel Flow

Air Data Converters & Adapters SHADIN TRANSDUCER KITS weight: dimensions: input voltage/current: maximum usable fuel: maximum altitude: operating temperature: humidity: accuracy: ground speed range: functions:

mounting: certification:

12 oz 3.25 × 1.25 × 7.5 in 14-28 VDC/200 mA @ 14 VDC to 28 VDC 1,800 gallons/6,822 liters, 9,999 lb/ 5,484 Kg @ 0.805 Kg/lit 40,000 ft -30° to 50°C up to 95% @ 32C ± 2% 27-600 knots fuel flow (selectable endurance warning) fuel used fuel remaining full fuel add fuel endurance instrument panel TSO-C44a

EDMO# KIT-A KIT-A1

EDMO#

MFR#

ENGINE TYPE

UNIT KIT-B

DIGIFLO-L 910531P 910532P 910534P 910536P 910537P 910538P

910531P 910532P 910534P 910536P 910537P 910538P

single twin twin twin single twin

gallons gallons 5.8 pounds 6.7 pounds liters liters

912041T-38-D

single

gallons

912041T-D 912045T-D 912046T-D

single single twin

gallons pounds pounds

KIT-F KIT-G

MICROFLO-L 912041T38D

MINIFLO-L 912041TD 912045TD 912046TD

KIT-L

ACCESSORIES

13

IK9121-1 IK9337 440501 440502 422110-1

IK9121-1 IK9337 440501 440502 422110-1

install kit for Mini/Microflo install kit for the Digiflo, 15 pin D-sub harness/Digiflo-L/twin harness/Digiflo-L/single harness/Miniflo-L/single, shield

KIT-O

Additional Digiflo, Microflo, and Miniflo configurations available, call EDMO for more information.

TRANSDUCERS FOR USE WITH SHADIN FUEL FLOW INDICATORS

KIT-O

KIT-A

KIT-R

MFR#

KIT COMPONENTS

KIT A

FF transducer #680501A (1), AN 816-4-4 90-degree elbow fittings (2) KIT A1 FF transducer #680501A (1), AN 816-4-4 90-degree elbow fittings (2), AN 823-4 45-degree elbow fitting (1), AN 912-1J bushing (1) KIT B FF transducer #680501B (1), AN 816-4-4 fitting (1), AN MS51528B elbow fitting(1), AN 912-1 bushing (1), MS20825-4 tee (1) KIT F FF transducer #680501F (1), AN 823-6 45-degree elbow (1), AN 822-6 90-degree elbow fitting (1) KIT-G FF transducer #680501G (1), MS 35207-263 screw 10-32 × 1/2 (2), AN 365-1032 elastic nut 1-32 (1), MS 21919 DG-32 clamp (2), AN 816-4-4 fitting (1) 660526AS FF transducer #660526AS (1), bracket (1), AN501A10-10 screw (4), AN4-4A bolt (4), AN960-416L washer (4), stop nut (4), MS51353185 nut (2), reducer (2), conical seal (2), washer (4), MS3106E10SL-3S ITT Cannon (1) KIT O FF transducer #660526A (1), connector (1), AN 4-4A bolts (1), AN 501A 10-10 screw, MS 20365-428 nut (1), AN960-416L washer (6), AN 960-10L washer #10 (4), mounting bracket (2), conical seal (2), MS51534B8-4S-8 to -4 reducer (2), MS51531-8S nut KIT R FF transducer #660526AS (1), reducer (2), MS3106E-10SL-3S connector (1), conical seal (2), MS51531-85 nut (2)

FUEL FLOW RANGE (GPH) 0-60 0-60

0-60

0-60 0-60

0-70

0-70

0-70

More transducer kits available. If you don’t see what you need, visit edmo. com or call 1.800.235.3300.

FUEL QUANTITY INDICATOR U M A INC 680501-1 EDMO# 660526AS 660532R 680501-1 680501-85

284

MFR# 660526AS 660532R 680501-1 680501(85.0)

DESCRIPTION 70 GPH with ST pick-up 200 GPH with RA pick-up bare bare, K-85.0 3%

1.800.235.3300 | edmo.com

EDMO# 18-260-1F5 MFR# 18-260-1F5 Electronic fuel quantity indicator with range of 10 - 180 ohm, 270 degree sweep and a black and white dial with wire leads.

EDMO DISTRIBUTORS

Air Data & Fuel Flow

Modular Accessory Remote Cards & Enclosures

MODULAR ACCESSORY REMOTE CARDS & ENCLOSURES MARC70 INTERFACE MODULES SANDIA AEROSPACE

switching module 305001-01

special interface module 305005-01

305018-00 shown with cards (sold separately)

The MARC 70 Switching and Interface Modules provide installers with a wide variety of interface circuits needed to integrate avionics systems. MARC 70 modules can be mounted individually in the SRU 1 or grouped in the SRU 5 or SRU 10 multi-card enclosures. The SRU 5 holds up to five interface modules while the SRU 10 holds up to 10 modules. MARC 70 modules are PMA approved and certified to 55,000 feet. EDMO#

MFR#

MODEL

DESCRIPTION

SPECIAL INTERFACE MODULES 305005-01

305005-01

SA 3

305005-02 305004-01 305003-01

305005-02 305004-01 305003-01

SA 3L SA 15 SA 24

Regulator/dimming board for use with incandescent lamps that provides 0.5 amps of annunciator drive for lighting display annunciator. Will provide 1 amp short term for test purposes. Switchable between bright and dim with both modes field adjustable. Similar to SA 3 but designed for use with LED lamps. Inverter board converts a high to a low or a low to a high to provide common annunciator power. 14 inverter outputs. Diode isolation module. Provides 23 lines of diode ground in-ground out isolation. Internal FET allows simultaneous test of all lines to ground. Requires 28 VDC for test.

MIL QUALIFIED SWITCHING MODULES 305001-01 305002-01

305001-01 305002-01

SA 263 SA 623

The SR263 has two, six-pole nitrogen-filled relays. The two relays can be activated simultaneously or individually. The SR 623 has six, two pole nitrogen filled relays. The six relays are activated individually.

SRU 1 SRU 5 SRU 10

The single module SRU 1 enclosure houses any of the MARC 70 modules. The SRU 5 will house up to 5 MARC 70 modules. Supplied with four blank plates. The SRU 10 houses up to ten MARC 70 modules. Extra slots can be reserved for future use.

ENCLOSURES 305146-00 305018-00 305014-00

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

13

305146-00 305018-00 305014-00

285

GPS Accessories

Notch Filters...................................................................................................... 288 Remote Relays.................................................................................................. 288 Re-Radiating Kits.............................................................................................. 289 Panel Docks...................................................................................................... 291 Tilt Adapters...................................................................................................... 294 Antenna Docks.................................................................................................. 295 Terrain Awareness Control Units....................................................................... 295 Course Deviation Indicators.............................................................................. 296 Cooling Fans..................................................................................................... 297

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

287

GPS Accessories Notch Filters

NOTCH FILTERS

MD41 24-POLE REMOTE RELAY MID-CONTINENT INSTRUMENTS AND AVIONICS The MD41-248 is a bulkhead-mounted remote transfer relay unit that switches a CDI or HIS indicator between two aircraft radio navigation systems. The unit is designed for use with the MD41-1xxx-series ACUs and is meant for situations in which the users wants to share a common CDI or HIS between an existing NAV system and a GPS system. This is a 24-pole unit with eight relay pairs with three poles per relay pair—each pair can be activated individually by either voltage or ground keying or as a group by ground keying. The unit provides indication that all relays have power applied to their activating coils with a design feature

INLINE GPS NOTCH FILTER TED MANUFACTURING CORP

EDMO# 4-70-54 MFR# 4-70-54 The Inline GPS Notch Filter prevents harmonic noise caused by communications radios from interfering with onboard GPS units. While an aircraft GPS receives positional information at 1575.42 MHz, the comm radios transmitting on a completely separate frequency can still cause interference. The TED 4-70-54 notch filter is a simple, low-cost way to clean up the receiver’s frequency environment. This device installs with standard BNC bayonet couplings, in-line between radios and antenna and is engineered to pass requisite environmental criteria. PARAMETER

weight: dimensions: material: relay contact current rating: voltage: RTCA DO-160c Env. Cat.:

UNITS

center notch frequency: attenuation over F+/-1.5 MHz: insertion loss from 118 to 137 MHz impedance from 118 to 137 MHz VSWR from 118 to 137 MHz

1575 MHz 52 dB 0.1 dB 50 Ohms 1.5:1

EDMO# MD41-248 MD41-24P28

14

COBHAM The RS12/16/24 family of remote switches allows large numbers of data or audio lines to be transferred with a single ground logic level. 14/28 VDC operation is supported and the series is Transport Canada Type Approved for installation in IFR and restricted aircraft. The RS16 provides user definable remote switching functions for more RS24-020 complex operations. It can work for both voltage or ground keying, and has an independent ILS reversion logic switch (for ground keying mode). Each 4-pole switch has its own status annunciation for fault monitoring and airframe troubleshooting. Dry nitrogen filled, gold contact, sealed relays provide dry-circuit to 0.5A switching range.

RS12-020 RS16-001 RS24-020

RS12-020 RS16-001 RS24-020

DESCRIPTION remote relay/20K modular remote relay/35K remote relay

MFR# MD41-248 MD41-24P(28)

# OF POLES / VOLTAGE 24 / 28 24 / 28

DEKLIN TECHNOLOGIES, INC

12-, 16-, 24- POLE RELAYS

MFR#

0.75 lb 2.86 × 1.52 × 2.60 inches gold plated contacts/nitrogen filled 2 Amps DC, no to exceed 30 V 28 V RTCA DO-160C, DO-208

AUTOPILOT INTERFACE UNIT

REMOTE RELAYS

EDMO#

MD41-24P28

# OF POLES/ VOLTAGE 12/14 OR 28 16/28 24/28

Pilots can simplify their glass primary flight display (PFD) interface with the AIU-900-series Autopilot Interface Units. The AIU-900s are pre-assembled autopilot interfaces that integrate with existing 1C388-series autopilot couplers while adhering to the interconnect specifications and component requirements recommended by AIU-900A PFD manufacturers. These devices provide multiple variations for installers to use instead of having to produce the same circuits from discrete components. –– Supports EFD1000PRO PFD to Century 1C388 series autopilot couplers and G500 PFD to Century 1C388 series autopilot couplers –– For use with Aspen or Garmin PFDs –– Installation/mounting is made simple by the device’s small size; equipped with a D-sub connector

weight: dimensions: case material: connectors: mounting:

0.38 lb 4.6 × 2.56 × 1.5 inches (not including mating connector) 5052H32 aluminum chassis and cover 25 Pin female D-Sub connector bulkhead, four 8/32 screws

ACCESSORIES D50SL-IKC D50SL-IKC RS12 install kit/crimp RS16-IKC D62SL-IKC RS16 install kit/crimp

288

---

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

GPS Accessories Re-Radiating Kits

component list AIU- capacitors: 0.027uF, 0.047uF metalized polyester, 100V 900A: inductor, choke: 18 mH, 27mH resistors: 10.0 kOhm, 100.0 kOhm 0.25W, 1% trim pots: 5 kOhm, 200 kOhm single turn, side adj transformers: TY-141P (×3) component list AIU- capacitors: 0.027uF, 0.047uF metalized polyester, 100V 900B: inductor, choke: 18 mH, 27mH resistors: 10.0 kOhm, 100.0 kOhm 0.25W, 1% trim pots: 5 kOhm, 200 kOhm single turn, side adj transformers: TY-141P (×1), TY-145P (×2) equipment sup1 each AIU-900 plied: equipment required 1 each 25 pin male D-sub connector but not supplied: 1 each SPC15461 hood or equivalent each 2063 screw locking hardware kit or equivalent or, 1 each AIU-900IK installation kit

EDMO# AIU-900A AIU-900B

MFR#

REQUIREMENTS

AIU-900A AIU-900B

use 3 each of the TY141P transformers use 2 each of the TY145P and 1 of the TY141P

ACCESSORIES AIU-900IK

AIU-900IK

AIU-900 Install Kit includes: 25-pin male D-sub connector, SPC15461 Hood (or equivalent), 2063 screw-locking hardware kit or equivalent

RE-RADIATING KITS HANGAR NETWORK GPS RE-RADIATING KITS GPS NETWORKING, INC. Making it easier than ever to transmit GPS signal throughout a facility or worksite, the Hangar Network GPS Re-Radiating Kit (HNRRKIT) is a system that makes it possible to re-radiate the GPS L1 signal indoors. The kit includes an active roof antenna, a re-radiating HNRRKIT110 amplifier with a wall-mount plug-in transformer that powers the entire system, and a passive re-radiating antenna. If a receiver has a line of sight with the indoor re-radiating antenna, it can receive GPS signal up to 100 feet away (indoors), making it an ideal product for customizing a GPS network. –– Kits include: #NRRKAMP Amplifier, #L1GPSA-N L1 Roof Antenna, and #L1RRKPA-S Re-radiating Antenna (includes SMA-N adapter) RE-RADIATING AMPLIFIER ELECTRICAL SPECIFICATIONS, TA = 250C frequency range:

TRANSFORMER RELAY ADAPTER DEKLIN TECHNOLOGIES, INC The TR1 and TR2 series transformer/relay adapters are pre-assembled autopilot interface units that follow the interconnect specifications and component requirements recommended by the manufacturers of certain PFD systems when interfaced with existing autopilots. Rather than TR1 designing their own assembly from several components, installers can install the TR1 or TR2 which is already housed in a small aluminum enclosure with the same wiring interface outlined in PFD installation manuals. MFR# TR1

TR1R

TR1R

TR2

TR2

TR2R

TR2R

gain: input SWR: output SWR: noise figure: gain flatness: reverse isolation:

FOR USE WITH For Aspen Avionics primary flight display installations when interfaced with Century autopilot models 21, 31, 41, 2000, 4000 For Aspen Avionics primary flight display installations when interfaced with Century autopilot models 21, 31, 41, 2000, 4000, with flight director For Aspen Avionics primary flight display installations when interfaced with Century autopilot models IIB, III, IV For Aspen Avionics primary flight display installations when interfaced with Century autopilot models IIB, III, IV with flight director

RE-RADIATING ANTENNA ELECTRICAL SPECIFICATIONS, TA = 250C frequency: bandwidth: impedance: peak gain: output SWR: polarization:

EDMO#

EDMO DISTRIBUTORS

14

EDMO# TR1

in/out impedance:

min: 1.1 GHz max: 1.7 GHz Ant – J1 type: 50 Ω Ant, J1 min: 20 dB type: 22 dB max: 24 dB max: 1.8:1 dB J1 - 50 Ω max: 1.8:1 Ant - 50 Ω typ: 3.3 dB max: 3.5 dB Ant – J1 typ: 0.5 dB max: 1 dB | L1 – L2 | ; Ant – J1 min: 35 dB J1 – Ant

typ: 1.575 GHz max: 20 MHz typ: 50 Ω typ: 3 dBic max: 1.5:1 typ: RHCP

MFR#

HNRRKIT110

HNRRKIT

HNRRKIT220

HNRRKIT-N/5/220

VG HNRRKIT

VGHNRRKIT-TNC/5/110

DESCRIPTION 110 V voltage input, N type connector 220 V voltage input, N type connector variable gain option; re-radiating amp gain varies from -3 to +23 dB, 110 V voltage input, TNC connector

1.800.235.3300 | edmo.com

289

GPS Accessories Re-Radiating Kits

L1 PORTABLE RE-RADIATING KITS GPS NETWORKING, INC. The L1 Portable Re-Radiating Kit (PNRRKIT) is similar to the Hangar Network GPS Re-radiating Kit in its ability to re-radiate GPS L1 signal indoors except that it is a portable unit. The PNRRKIT consists of a re-radiating amplifier with a wall mount plug-in transformer that powers the system, along with a PNRRKIT110 passive L1 re-radiating antenna. The GPS signal is picked up by the roof antenna and then re-radiated indoors by the passive antenna for a distance of up to 100 feet. –– Kit includes: # L1RRKPA-S Re-Radiating Antenna and #NRRKAMP Amplifier (with wall mount plug-in) RE-RADIATING AMPLIFIER ELECTRICAL SPECIFICATIONS, TA = 250C frequency range:

min: 1.1 GHz max: 1.7 GHz Ant – J1 type: 50 Ω Ant, J1 min: 20 dB type: 24.5 dB max: 26 dB J1, Normal Configuration min: -3 dB max: 23 dB Variable Gain Option max: 1.8:1 J1 - 50 Ω max: 1.8:1 Ant - 50 Ω typ: 3.3 dB max: 3.5 dB Ant – J1 typ: 0.5 dB max: 1 dB | L1 – L2 | ; Ant – J1 min: 35 dB J1 – Ant

in/out impedance: gain:

input SWR: output SWR: noise figure: gain flatness:

14

reverse isolation:

RE-RADIATING ANTENNA ELECTRICAL SPECIFICATIONS, TA = 250C frequency: bandwidth: impedance: peak gain: output SWR: polarization:

EDMO#

290

typ: 1.575 GHz max: 20 MHz typ: 50 Ω typ: 3 dBic max: 1.5:1 typ: RHCP

MFR#

PNRRKIT-MC

PNRRKIT-MC

VG PNRRKIT

VGPNRRKIT-TNC/5/110

RE-RADIATING KIT ACCESSORIES EDMO#

MFR#

DESCRIPTION

ANTENNAS L1GPSA-N

L1GPSA-N

L1RRKPA-S

L1RRKPA-S

L1GPSA-N antenna: 38 dB gain antenna that works with the GPS L1 carrier frequency; this antenna is powered by the 5 VDC it receives on the center conductor. L1RRKPA-S re-radiating antenna: passive antenna that re-radiates the GPS L1 carrier frequency; available with SMA-female connectors.

ANTENNA ACCESSORIES RAMB-L1 N/F-SMA/M

RFA-8682

WRUMT

WRUMT

L1 roof antenna mounting bracket “N” female to “SMA” male adapter for HNRRKIT re-radiating kit antenna mount for the amplifying antenna included in the HNRRKIT

XM/SIRIUS SATELLITE RADIO RERADIATING KIT GPS NETWORKING, INC.

EDMO# XMSRRKIT MFR# XMSRRKIT The XM/Sirius re-radiating kit is a complete re-radiating system that makes it possible to re-radiate XM and Sirius satellite radio signals indoors or in other environments where it is not possible to receive satellite signals. The XMSRRKIT consists of an active roof antenna, a re-radiating amplifier with a wall mount plug-in transformer that powers the entire system, and a passive re-radiating antenna. This system receives XM or Sirius signals via the roof antenna and then amplifies and re-radiates the signal indoors over distances up to 100 feet. (Actual re-radiated distance is determined by the cable length and type between the roof antenna and re-radiating amplifier and retransmit antenna.) –– Amplified roof antenna; gain ≥ 30 dB –– Re-radiating amplifier with power supply; gain ≥ 18 dB –– Options for mounting kit hardware and additional re-radiating amp gain ROOF ANTENNA ELECTRICAL SPECIFICATIONS, OPERATING TEMPERATURE -40° TO +185°F frequency: bandwidth: out imped.: pre-amp gain: noise figure: polarization: current draw: req. DC input V.:

Min 2332.5

Typ

Max 2345

12.5 50 30 1.0 LHCP 5.5

6.0

70 6.5

Units MHz MHz Ω dB dB circular mA Vdc

DESCRIPTION 110 V voltage input, normal gain ≥ 20 dB, military connector (user supplies DC voltage), portable version variable gain option; re-radiating amp gain varies from -3 ≤gain ≤23 dB, 110 V voltage input, TNC connector, portable version

1.800.235.3300 | edmo.com

RE-RADIATING AMPLIFIER ELECTRICAL SPECIFICATIONS, OPERATING TEMPERATURE -40° TO +185°F frequency range: in/out impedance: gain:

Min 1.0

Typ 50 18

Max 3.0

Units GHz Ω dB

EDMO DISTRIBUTORS

GPS Accessories Panel Docks

RE-RADIATING AMPLIFIER ELECTRICAL SPECIFICATIONS, OPERATING TEMPERATURE -40° TO +185°F input SWR: output SWR: noise figure: current:

1.8:1 1.8:1

dB mA

2.0 25

GARMIN 196/296/396/495/496 DOCK AIRGIZMOS, LLC

RE-RADIATING ANTENNA ELECTRICAL SPECIFICATIONS, TA=250C frequency: bandwidth: impedance: peak gain: output SWR: polarization:

Min 2320

Typ

Max 2345

25 50 3 1.5:1

PANEL DOCKS

Units MHz MHz Ω dBic -

RHCP

The Garmin Panel Dock allows users to temporarily mount the Garmin 196, 296, 396, and 496 GPS units into the panel with the look of a permanent installation while retaining the flexibility and versatility of their portable device. The dock fits into a standard 6.25-inch avionics stack or can be flush-mounted anywhere in the panel. The GPS unit is firmly held in place but can be removed by pulling the release tab on the left side of the (GPS unit not included) unit. The unit’s power and antenna cables slide through the prefabricated keyholes toward the back of the unit which keeps cables out of sight and prevents connectors from slipping back into the panel when the unit is removed.

RE-RADIATING AMP SYSTEM POWER SUPPLY OPTIONS Source Voltage Options

Voltage Input 110 VAC 220 VAC 240 VAC (UK) customer supplied DC 9-32 VDC

Style transformer (wall mount) transformer (wall mount) transformer (wall mount) military style connector

RE-RADIATING AMP normal gain additional gain

weight: dimensions:

EDMO# AG-ITEM 4

4.3 oz 6.25 × 4.25 × 2.44 in

MFR# PD4

ACCESSORIES

gain = 18 dB gain = 36 dB

AG-ITEM 14

PD9

RE-RADIATING AMP RF CONNECTOR OPTIONS Connector Options

Connector Style type N type SMA type TNC Type BNC

Charge NC NC NC NC

MECHANICAL SPECIFICATIONS radome dimensions: arm length: mounting bracket: roof antenna connector:

Not finding what you need? EDMO carries a wide range of GPS accessories, so if the part you are looking for isn’t listed in the catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

The AirGizmos Panel Dock Cover is designed to cover the Panel Dock for the Garmin 196, 296, 396, and 496 GPS devices—both with and without the GPS installed. It covers the open space when the dock is empty and protects the GPS from the sun when installed. Weight: 2.4 oz / Dimensions: 6.78 × 4.2 × 0.6 in

GARMIN 295 PANEL DOCK AIRGIZMOS, LLC

EDMO# AG-ITEM 2 MFR# PD2 The Garmin 295 Panel Dock is similar to the AG-ITEM 4 except that it is designed to fit the Garmin 295 handheld GPS, which is a wider unit, and therefore the dock is larger and will not fit a standard 6.25-inch radio stack. The GPS device is held firmly in place but is easy to remove within seconds. The power and antenna cables are routed through the back of the unit where a series of machined keyholes prevent the connectors from sliding through the panel.

weight: dimensions:

14

3.75 × 3.75 8 4.75 × 2.75 F connector (adapter included to convert to N-female) roof antenna weight: 1.75 lbs (including mounting hardware) amplifier box input connector: N-female amplifier/re-radiating antenna box 4 × 4 × 4.5 dimensions: amplifier/re-radiating box weight: 2.75 lb (includes box, power supply, amplifier, re-rad antenna)

EDMO DISTRIBUTORS

DESCRIPTION panel dock

(GPS unit not included)

5.1 oz (without mounting hardware) 7.4 × 4.05 × 3.25 in

1.800.235.3300 | edmo.com

291

GPS Accessories Panel Docks

AERA 500 SERIES PANEL DOCK AIRGIZMOS, LLC

EDMO# AG-ITEM 41 MFR# PD16 Users can easily mount the Garmin aera 500 series GPS into a panel with the aera 500-series panel dock which creates the look of a permanent installation with the ability to easily remove the portable device as desired. The dock matches the look and feel of the panel while keeping the device out of the way of other instruments and all cables organized and out of sight; it even has extra room to accommodate the docking connector that Garmin added to the aera 500. Users can access the power button on the device via the actuator built into the dock—this provides easier access when the Garmin is docked within the panel. –– For those upgrading from an older GPS unit, the aera 500 also fits the same opening as the 196, 296, 396, and 496 panel docks, using the same hole layout for mounting

weight: dimensions:

EDMO# AG-ITEM 41

3.3 oz 6.25 × 4.25 × 1.53 in

MFR# PD16

DESCRIPTION

PD21

MFR# PD13

DESCRIPTION panel dock

ACCESSORIES AG-ITEM 45

PD20

Keep expensive GPS equipment protected from the sun and out of sight with the 695/696 Panel Dock Cover that is designed to fit Garmin 695 and 696 GPS devices. The cover is designed with a latch that can be locked with a standard padlock if needed.

GARMIN AERA 795/796 PANEL DOCK AIRGIZMOS, LLC

EDMO# PD22 MFR# PD22 Designed to fit the Garmin aera 795/796 GPS unit, which is larger than its predecessor, the 696, the 795/796 Panel Dock has a carefully sculpted design that minimizes the footprint required so that it can still fit within the dimensions of 6.25 × 8 in. The size and screw hole locations match the 696 Panel Dock, which makes it easy for users to upgrade from the 696 GPS and dock to the 795 or 796. The dock includes an actuator button that allows the user to access the GPS device’s on-off switch at the top of the device without having to remove it from the panel. A cooling port at the back of the panel is compatible with standard avionics cooling fans if desired.

panel dock

ACCESSORIES AG-ITEM 46

EDMO# AG-ITEM 29

Keep expensive GPS equipment protected from the sun and out of sight with the aera 500 Panel Dock Cover that is designed to fit the Garmin aera 500 GPS devices. The cover is designed with a latch that can be locked with a standard padlock if needed. Weight: 2.7 oz / Dimensions: 6.49 × 4.25 × 1.48 in

weight: dimensions:

7.8 oz 6.25 × 8 × 2.3 in

The iCloth: a screen-cleaning solution. GARMIN 695/696 PANEL DOCK

14

AIRGIZMOS, LLC The Garmin 695/696 Panel Dock allows users to install the Garmin 695 and 696 GPS devices into the panel with a sleek dock that creates the look of a permanent installation without giving up the mobility of a portable device. The dock accommodates the 5.7 × 7.7-inch dimensions of the larger 696 yet still fits into the standard 6.25-inch standard stack size. It uses a latching wheel mechanism that holds the unit in place while remaining virtually invisible from the front of the panel so that it doesn’t extend beyond the allotted space. Users can install or remove the 695 or 696 GPS units within a matter of seconds.

iCloth® wipes keep glass surfaces in the panel free of dust, streaks, fingerprints, and static with aviation grade Dupont™ Sontara® fabric. See parts ICA24, IC100, and ICA500 on page 124.

AIRMAP 1000/2000C PANEL DOCK AIRGIZMOS, LLC

EDMO# AG-ITEM 6 MFR# PD6 Designed to fit the Lowrance AirMap 1000/2000c series of portable GPS receivers, this Panel Dock locks the AirMap into place with a release latch at the top that makes it easy to remove the device and use it in other aircraft. The AirMap’s cables can fit through the keyhole slots in the back of the unit. (GPS unit not included)

weight: dimensions:

292

8.9 oz 6.25 × 8 × 2.85 in

1.800.235.3300 | edmo.com

weight: dimensions:

6.6 oz 7.18 × 3.29 in

EDMO DISTRIBUTORS

GPS Accessories Panel Docks

IFLY 700/720 PANEL DOCK AIRGIZMOS, LLC

weight: dimensions:

EDMO# PD23 MFR# PD23

5.8 oz 6.25 × 8 × 1.67 in

AVMAP EKP-IV PANEL DOCK AIRGIZMOS, LLC

PD23 (GPS unit not included) The iFly 700/720 panel dock make it easy to mount a 700/720 GPS into the instrument panel. This mount supports the GPS in a stable, safe installation that can be mounted horizontally or vertically and it provides additional room for the external battery.

weight: dimensions:

6.8 oz 2.43 × 7.9 × 6.25 in

EDMO# AG-ITEM 5 MFR# PD5 For users of the AvMap EKP-IV, AirGizmos has created a simple mounting solution, the AvMap EKP-IV Panel Dock which is designed to hold the AvMap securely while allowing the user to remove the portable device from the plane when needed. This dock is equipped with a quick-release feature, cable storage, and a clean finish that matches the panel.

weight: dimensions:

(EKP-IV not included)

5.3 oz 7.71 × 5.65 × 2.38 in

AV8OR PANEL DOCK FOR BENDIXKING AIRGIZMOS, LLC

EDMO# AG-ITEM 31 MFR# PD15 The AV8OR Panel Dock holds the BendixKing AV8OR GPS securely in place within the panel and fits a standard 6.25inch radio stack. To accommodate the AV8OR’s two selection buttons at the top of the device, the dock has two corresponding tabs that allow the user to make selections without removing the GPS from the panel.

3.4 oz 6.25 × 4 × 1.46 in

BENDIXKING AV8OR ACE PANEL DOCK AIRGIZMOS, LLC

EDMO# AG-ITEM 36 MFR# PD17 Designed to fit around the large display of the BendixKing AV8OR ACE GPS unit, the AV8OR ACE panel dock holds the unit in place with a cleanly designed finish that matches seamlessly with the rest of the panel and cockpit. The dock fits a standard 6.25-inch radio stack. The AV8OR ACE can be installed into the panel dock with a standard battery or the extended battery.

EDMO DISTRIBUTORS

AIRGIZMOS, LLC Designed for the portable GeoPilot GPS from AvMap, the AvMap GeoPilot and GeoPilot II Panel Docks allow the user to temporarily install the GeoPilot in the panel while retaining the ability to easily remove the GPS for uses outside the plane or in other planes. Both docks accommodate power and antenna cables, keeping them stored away out of sight for a clean, professional-looking installation. The GeoPilot II is designed to fit into a standard 6.25-in stack.

weight:

3.9 oz (AG-ITEM 17) 5.2 oz (AG-ITEM 25) 7.23 × 4.99 × 1.36 in (AG-ITEM 17) 6.25 × 4.8 × 3.14 in (AG-ITEM 25)

dimensions:

EDMO# AG-ITEM 17 AG-ITEM 25

AG-ITEM 25

14

weight: dimensions:

GEOPILOT & GEOPILOT II PANEL DOCKS

MFR# PD11 PD12

DESCRIPTION GeoPilot Panel Dock AvMap GepPilot II+ panel dock

1.800.235.3300 | edmo.com

293

GPS Accessories Tilt Adapters

IPAD PANEL MOUNTS AIRGIZMOS, LLC

TILT ADAPTERS 196/296/396/496/AERA VERTICAL TILT ADAPTER AIRGIZMOS, LLC

BM2 (iPad not included) BM3 The iPad panel mounts are equipped with a base mount that is screwed to the panel using standard instrument mounting holes. The iPad can then be snapped into the dock where it is held securely.

weight:

5.9 oz (BM2) 2.5 oz (BM3MINI) 13.6 oz (BM3AIR) 7.69 × 9.78 × 2.10 in (BM2) 5.53 × 8.18 × 1.76 in (BM3MINI) 12 × 9 × 4 in (BM3AIR)

dimensions:

EDMO# BM2 BM3MINI BM3AIR

MFR# BM2 BM3MINI BM3AIR

DESCRIPTION iPAD Panel Mount (GEN 1, 2 & 3) iPAD Mini Panel Mount iPAD Air Panel Mount

IPAD MINI PANEL DOCK

14

AIRGIZMOS, LLC

EDMO# PD24 MFR# PD24 The iPad Mini Panel Dock from AirGizmos provides a secure, temporary place to mount the iPad mini for use while in flight. The iPad mini panel dock includes a cooling port on the back that is compatible with standard avionics cooling fans. –– Designed to work with the AirGizmos Angle Adapter, see part AG-ITEM 30

EDMO# AG-ITEM 10 MFR# PD8 Designed for use with the AGITEM-4, the aera Vertical Tilt Adapter provides a 30° angle for better viewing of the GPS unit mounted within when mounted above or below the direct line of sight. It can be mounted to provide the desired angle in either direction (up or down). This adapter fits the same opening as the panel dock itself so that it can be easily mounted in existing installations.

weight: dimensions:

3 oz 3 × 6.45 × 4.28 in

HORIZONTAL TILT ADAPTERS AIRGIZMOS, LLC Pilots can improve the visibility of GPS units (particularly if mounted on the passenger side) by using the Angle Adapters from AirGizmos. These devices are compatible with the AirGizmos Panel Docks and provide 15° of tilt to the GPS dock for the best possible viewing angle. The adapter fits the same panel cutout as the Panel Dock and it also provides more installation AG-ITEM 30 options as it gives the user the option to surface-mount the Panel Dock on any instrument panel. See table below for GPS Panel Dock compatibilities.

weight:

3.8 oz (AG-ITEM 30) 2.7 oz (AG-ITEM 7) 6.45 × 8.11 × 2.27 in (AG-ITEM 30) 6.38 × 4.25 × 2.55 in (AG-ITEM 7) 6.25 × 8 in

dimensions: cutout opening: weight: dimensions:

4.4 oz 6.25 × 8 × 1.32 in

EDMO# AG-ITEM 30 AG-ITEM 7

The iCloth: a screen-cleaning solution.

MFR# PD14 PD7

FOR USE WITH Garmin 695/696/795/796 Product is intended for use with the Garmin 196/296/396/496 Panel Dock, and Garmin aera 500 series Panel Dock

iCloth® wipes keep glass surfaces in the panel free of dust, streaks, fingerprints, and static with aviation grade Dupont™ Sontara® fabric. See parts ICA24, IC100, and ICA500 on page 124.

294

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

GPS Accessories Antenna Docks

ANTENNA DOCKS AERO COVER FOR GPS/XM ANTENNAS AIRGIZMOS, LLC

EDMO# AG-ITEM 13 MFR# 31 The Aero Cover is a streamlined, attractive external cover for portable GPS antennas or XM weather antennas. This cover fits all major brands of GPS and XM weather antennas and protects them from the elements.

weight: dimensions:

2.2 oz 6.56 × 4 × 1.3 in

AERO DOCK/GARMIN 396 XM ANTENNA AIRGIZMOS, LLC

EDMO# AG-ITEM 12 MFR# AD-2 Sleek with an aerodynamic exterior, the AirGizmos Aero Dock allows users to mount a Garmin 396 XM antenna on the exterior of the aircraft. It keeps the antenna cables hidden out of sight while making installation simple and efficient. –– Kit includes 1 cradle, 1 base, 1 cable, and mounting hardware

weight: dimensions:

2.6 oz 6.56 × 4 × 1.21 in

396 XM ANTENNA DOCK AIRGIZMOS, LLC

MD41 TAWS CONTROL UNITS MID-CONTINENT INSTRUMENTS AND AVIONICS The MD41 series of terrain awareness control units provide annunciation and mode selection for Terrain Awareness Warning Systems (TAWS). These units are available in horizontal MD41-1308 and vertical configurations, 14- and 28-volt versions, and are compatible with multiple systems including those made by Garmin, Honeywell, L-3, and Sandel. These devices are equipped with automatic photocell dimming, manual and remote test capability, and a sunlight-readable display. –– Presents the primary or secondary visual TAWS alert within direct view of the pilot –– Provide annunciation and mode selection for terrain awareness warning systems (TAWS), helicopter terrain awareness warning systems (HTAWS), enhanced ground proximity warning systems (EGPWS). –– Easier, less time-consuming installation than individual switches and wires –– Daylight readable annunciations with automatic photocell dimming and internally lighted pushbuttons –– Remote annunciator test capability –– Panel punches available (see table below)

dimensions:

Available in two sizes: 0.8 × 2.25 × 3.5 in (MD41-1208) 0.8 × 2.75 × 3.5 in (MD41-1308, MD41-1348) 55,000 ft TSO C151a certified RTCA DO-160D

altitude: certifications:

EDMO#

MFR#

VOLTAGE/ TYPE

FOR USE WITH

HORIZONTAL MOUNT ORIENTATION MD41-1028 MD41-12485 MD41-1048 MD41-1348 MD41-1368 MD41-1208 MD41-1208D

MD41-1028 MD41-1248 MD41-1048 MD41-1348 MD41-1368 MD41-1208 MD41-1208D

28 / TAWS 5 / TAWS 28 / HTWAS 28 / HTAWS 28 / HTAWS 28 / TAWS 28 / EGPWS

Garmin GNS 530 Sandel ST3400 Garmin GNS 430W Honeywell Mark XXII Honeywell Mark XXII Honeywell KGP-560 Honeywell KGP-560 (dual install)

14

EDMO# AG-ITEM 8 MFR# AD1 The XM Antenna dock allows users to move their Garmin 396 XM weather antennas (and GPS) between vehicles or aircraft.

TERRAIN AWARENESS CONTROL UNITS

VERTICAL MOUNT ORIENTATION MD41-1378 weight: dimensions:

2.4 oz 3.75 diameter × 1.125 in high

28 / TAWS

Honeywell MK21

More configurations are available. Call EDMO to address your specific needs.

Not finding what you need? EDMO carries a wide range of GPS accessories, so if the part you are looking for isn’t listed in the catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

295

GPS Accessories

Course Deviation Indicators

COURSE DEVIATION INDICATORS MD200 SERIES COURSE DEVIATION INDICATOR MID-CONTINENT INSTRUMENTS AND AVIONICS The MD200 Series 3-inch Course Deviation Indicators are engineered to fit a standard 3-1/8-inch panel cutout. They use durable metal construction with ball bearings in critical areas and anti-reflective glass lenses. Built-in annunciators and a dimming circuit help to reduce installation costs while also providing the user with navigational source information. This CDI is the same unit that GARMIN AT™ uses in their systems and it is a direct pin-for-pin replacement for the Collins Microline™ IND-350 and 351. It is also a direct replacement for the KI-206 with a different connector. Connector kit included. OPTIONS: the MD200-302/303 accept DC left-right, to-from and Nav warn flag signals from a remote-mounted VOR converter while the MD200-306/307 accepts DC signals from a glideslope receiver which drives the UP-DOWN needle along with a GS warn meter; both units incorporate NAV, GPS, and BC annunciation with photocell dimming. –– FAA TSO approved for use with all GPS and VOR systems –– High quality rectilinear meter movements –– MIL-SPEC connectors included –– Annunciations for NAV, GPS and Back course (BC) –– Compatible WAAS GPS receivers –– Automatic photocell annunciator dimming –– True course resolver output –– Internal 14 and 28 volt lighting –– Optional course datum synchro

MD222 SERIES COURSE DEVIATION INDICATOR MID-CONTINENT INSTRUMENTS AND AVIONICS For smaller panel installations, the MD222 Series 2-inch Course Deviation Indicator is an ideal solution, thanks to its compact, space-saving size. The units in this series have new-generation rectilinear meter movements for more accurate readings, a course selector, and resolver output. Designed with precision-fit metal gears, ball bearings, and a glass lens. –– 2-1/4-inch size –– For added safety, pointers move MD222-506 out of view with invalid signal –– Provides more accurate readings with rectilinear meter movements –– LED backlighting –– Built-in annunciations for NAV, GPS, and VLOC or BC –– FAA TSO approved for use with most GPS and VOR systems –– Rugged construction includes ball bearings in critical areas –– True course resolver output (1 volt, 30 Hz) –– Quality Mil-Spec connectors included

weight: dimensions: power input: input range: temperature range: altitude: humidity: NAV/GS Deviation

14

valid NAV/GS meter weight: cutout: voltage input: current input: temperature: altitude: humidty: vibration: certification: mounting: connector:

EDMO#

1.4 lb (MD200-302, -306) standard 3 1/8-inch round 14 VDC or 28 VDC 0.3 amps max –55°C to +70°C 0 to 55,000 ft 95% non-condensing DO-160B, Cat. M and N FAA TSO-C34e, -C36e, -C40c panel, rear mount Mil-Spec 25-pin D-Subminiature

MFR#

DESCRIPTION

MD200-302 MD200-302 left-right only, NAV, GPS MD200-306 MD200-306 Glidescope, NAV, GPS MD200-3065 MD200-3065 Glidescope, NAV, GPS; 5 volt bezel lighting

FOR USE WITH Garmin AT CNX80, GX50/60 and SL30 models

to/from annunciation:

operational shock OBS resolver: lighting: cover glass: color:

connectors: certifications:

296

1.800.235.3300 | edmo.com

0.6 lb 3.5 in (length) accepts 11 to 32 volts DC, 0.3A max. common mode voltage range is 1V to 5V for deviation signal inputs –30°C to +55°C (–22°F to 130°F) –15,000 ft. to +55,000 ft 95% non-condensing input impedance: normal: 1k ohms ± 10% max operating temp range: 1k ohms ± 25% deflection sensitivity: normal: 150 mV ± 10% max operating temp range: 150 mV ± 25% Input impedance: Normal: 1k ohms ± 10% Max Operating Temp Range: 1k ohms ± 25% meter in view: normal: 260 mV ± 10% max operating temp range: 260 mV ± 25% input impedance: normal: 200 ohms ± 10% max operating temp range: 200 ohms ± 25% to or from in view: normal: ± 40 mV ± 15% max operating temp range: ± 40 mV ± 25% rigid mounting, 6G operational, 15G crash safety zeroed at: normal: 300° ± 1° ORZ max operating temp range: 300° ± 2.5° internal white LED. Lighting control voltage is selectable for 5, 14 or 28 VDC special HEA (anti-reflective) coating index marks and text: white dial background: black glideslope & navigational pointers: white bezel: black 25-pin male D-Sub (MD25M3S0V50) Mating Connector 25-pin female D-Sub (MD25F3R4000 or equivalent) FAA TSO-C34e, -C36e, -C40c RTCA DO-192, -195, -196, -160E

EDMO DISTRIBUTORS

GPS Accessories Cooling Fans

EDMO#

MFR#

DESCRIPTION

MD222-406 MD222-406 MD222-506 MD222-506

Built in annunciator reads: GS/LOC, NAV, GPS, VLOC Built in annunciator reads: BC, GS/LOC, NAV, GPS

FOR USE WITH Garmin GNS-430/530 models HoneyWell,Bendix King KLN-89/90A,KLN89B,90B,94,900,KSN770,KLX-135A

SAFE 128 & 328 COOLING FANS SANDIA AEROSPACE The SAFE series cooling fans are axial fans that attach directly to an avionics unit’s cooling port. These fans provide a nominal 20 CFM of cooling air and an alert output whenever the fan RPM drops below a preset level. The SAFE series uses a high quality, brushless blower motor and or RunQuiet technology.

COOLING FANS

SAFE 128

SAFE 328

ACF 314 & 328 COOLING FANS SANDIA AEROSPACE The ACF 314 and ACF 328 are 3-port cooling fans with the ability to cool up to three avionics units and the capacity to cool up to 20 cubic feet of air per minute. The ACF 314 and ACF 238 operate on 14 VDC and 28 VDC respectively using a high-quality, brushless blower motor and or RunQuiet technology. The ACF 528 is similar to the ACF 314 and ACF 328 but is equipped with five ports and the ability to cool up to five avionics units while operating on 28 VDC.

weight: dimensions: operating voltage: current draw: certification:

EDMO# 305468-00 305467-00

ACF314

weight: dimensions: operating voltage:

certification:

EDMO# ACF314 ACF328 ACF528

MFR# 305468-00 305467-00

MODEL # SAFE 128 SAFE 328

28 28

ACF528

1.18 lb 5.92 × 5.18 × 2.1 in ACF314: 14 VDC ACF328: 28 VDC ACF314: 960 mA (1.7 A at startup) ACF328: 480 mA (0.85 A at startup) FAA-PMA

MFR#

VOLTAGE

PORTS

ACF314 ACF328 ACF528

14 28 28

3 3 5

EDMO DISTRIBUTORS

VOLTAGE

14

current draw:

SAFE 128: 0.25 lb SAFE 328: 0.7 lb SAFE 128: 2.36 × 2.87 × 1.44 in SAFE 328: 5.58 × 4.75 × 1.25 in 22-31 VDC SAFE 128: 100mA nominal < 0.250 mA startup SAFE 328: 400mA nominal < 0.550 mA startup FAA-PMA

1.800.235.3300 | edmo.com

297

Aircraft Lighting

Instrument Lighting........................................................................................... 300 Cabin Lights...................................................................................................... 303 Dimmers............................................................................................................ 305 Anti-Collision & Position Lights......................................................................... 306 Beacons............................................................................................................ 311 Taxi, Landing & Recognition Lights................................................................... 313 Lighting Accessories......................................................................................... 315

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

299

Aircraft Lighting Instrument Lighting

INSTRUMENT LIGHTING NULITE LIGHT WEDGES NULITE INSTRUMENT LIGHTING SYSTEMS NULITE aircraft instrument lighting creates the same lighting appearance as internal lighting kits without the cost and install time. Sandwiched between the instrument and the panel, they reduce glare and hot spots by concentrating 60% of the light on the upper half of the instrument—all focused by a unique bezel that directs light toward the instrument, not the pilot. –– Available in two configurations, light wedges and light bars –– No special tools or equipment required, NULITES can be installed in a matter of minutes

EDMO# LW3028A LW3028AA LW3028AB LW3028B LW3028V

MFR# LW3028A LW3028AA LW3028AB LW3028B LW3028V

VOLTAGE

DESIGN

28 V 28 V 28 V 28 V 28 V

left cutout alt cutout double cutout / gyro right cutout VSI

PMA

yes

NVIS 2/-1/4 IN NV2028A NV2028B NV2028

NV2028A NV2028B NV2028

28 V 28 V 28 V

left cutout right cutout round

NV3028 NV3028-S NV3028 NV3028B NV3028AB NV3028AA NV3028A

28 V 28 V 28 V 28 V 28 V 28 V 28 V

round round / for Sikorsky VSI cutout right cutout left and right cutout altimeter cutout left cutout

3-1/8 IN NV3028 NV3028-S NV3028V NV3028B NV3028AB NV3028AA NV3028A

LED 2-1/4 IN LW2014

LW2034 LW2034A LW2034B LW2038 LW2038A LW2038B

LW3005

LW2034 LW2034A LW2034B LW2038 LW2038A LW2038B

14 V 14 V 14 V 28 V 28 V 28 V

round left cutout right cutout round left cutout right cutout

LW3034 LW3034A LW3034AA LW3034AB LW3034B LW3034V LW3038 LW3038A LW3038AA LW3038AB LW3038B LW3038V

14 V 14 V 14 V 14 V 14 V 14 V 28 V 28 V 28 V 28 V 28 V 28 V

round left cutout altimeter cutout left and right cutout right cutout VSI cutout round left cutout altimeter cutout left and right cutout right cutout VSI cutout

3-1/8 IN

NV3028A EDMO#

MFR#

VOLTAGE

DESIGN

PMA

INCANDESCENT

15

2-1/4 IN LW2005 LW2005A LW2014 LW2014A LW2014AA LW2014AB LW2014B LW2028 LW2028A LW2028AE

ACCESSORIES LW2005 LW2005A LW2014 LW2014A LW2014AA LW2014AB LW2014B LW2028 LW2028A LW 2028-AE

5V 5V 14 V 14 V 14 V 14 V 14 V 28 V 28 V 28 V

no cutout left cutout no cutout left cutout altimeter cutout left and right cutout, gyro right cutout no cutout left cutout left cut / for American Eurocopter

yes yes yes

LW3005 LW3005A LW3005AA LW3005B LW3014 LW3014A LW3014AA LW3014AB LW3014B LW3014V LW3028

5V 5V 5V 5V 14 V 14 V 14 V 14 V 14 V 14 V 28 V

no cutout left cutout alt cutout right cutout no cutout left cutout alt cutout double cutout / gyro right cutout VSI no cutout

yes

300

1G02

1G02

pin kit for UMA light wedges

LIGHT BARS yes

3-1/8 IN LW3005 LW3005A LW3005AA LW3005B LW3014 LW3014A LW3014AA LW3014AB LW3014B LW3014V LW3028

LW3034 LW3034A LW3034AA LW3034AB LW3034B LW3034V LW3038 LW3038A LW3038AA LW3038AB LW3038B LW3038V

NULITE INSTRUMENT LIGHTING SYSTEMS Four-inch lighting strip for installation above areas requiring additional lighting. –– 0.075 larger than standard ATI instruments –– Includes two Mil Spec. incandescent lamps

yes

yes

1.800.235.3300 | edmo.com

LB4028

LB4014

EDMO DISTRIBUTORS

Aircraft Lighting Instrument Lighting

EDMO# thickness: material: coating: lighting: current draw:

0.220 in translucent plastic three part NO-MAR epoxy 100% linear (i.e. 7V on a 14V lamp will produce 50% lumens) 80 mA (average) 125 mA (max)

71434G20 71434G21 71434G22 71434G23

MFR#

COLOR

01-0771434G20 01-0771434G21 01-0771434G22 01-0771434G23

EDMO#

MFR#

SIZE

LB4014 LB4028

VOLTAGE

4 in 4 in

14 V 28 V

VOLTAGE

long long short short

28 VDC 28 VDC 28 VDC 28 VDC

with spacer -

28 VDC 28 VDC 28 VDC

71440 SERIES

Meets FAR 25.853 burn requirements, PMA approved.

LB4014 LB4028

red white red white

POST HEIGHT

7144000 7144001 7144002

01-0771440-00 01-0771440-01 01-0771440-02

red white red

71450 SERIES BLACK 71450B11 71450B21 71450B23

714XX-SERIES LED INSTRUMENT POST LIGHTS The 71434, 71440, and 71450 Series LED instrument post light assemblies illuminate the instrument panel and function as instrument mounting bolts, making them a high quality, long-lasting alternative to conventional incandescent post lights. LED lighting provides a longer operating life of approximately 20,000 hours, reduced power consumption, and improved shock and vibration resistance (LEDs do not contain a filament), crisp, clear light color and temperature, and no EMI/RFI interference. –– Approximately 20,000 hour LED life 71450B23 –– Shock and vibration resistant –– Light color and temperature –– Produces no EMI or RFI interference –– Model 71434 is available in a 14V version with a white LED and a 28 V version with white or red (replaces existing A350 and A250CN assemblies) –– Model 71450 includes a connector nut and is otherwise identical to 71434 –– Model 71440 includes a #10-32 mounting thread and includes a 28 VDC version with white or red LED (replaces Model 70348)

MFR#

COLOR

POST HEIGHT

71450G11 71450G13 71450G20 71450G21

01-0771450G11 01-0771450G13 01-0771450G20 01-0771450G21

white white red white

long short long long

14 VDC 14 VDC 28 VDC 28 VDC

70844 SERIES LED INSTRUMENT POST LIGHTS WHELEN ENGINEERING CO, INC. The model 70844 series are LED instrument post light assemblies are designed to illuminate the instrument panel and function as instrument mounting bolts—making them an excellent alternative to standard incandescent post lights. –– Long life of approximately 20,000 hours –– Reduced power consumption compared to alternative light sources –– Shock and vibration resistant –– No EMI or RFI interference

power consumption:

VOLTAGE

71434 SERIES

EDMO# 7084400 7084401 7084403 7084402

7084400

0.03 lb 1 in w/out spacer 1.12 inches w/spacer 0.02 amps @14 VDC 0.02 amps @28 VDC

MFR# 01-0770844-000 01-0770844-010 01-0770844-030 7084402

CONFIGURATION 1 in post/nut 1.5 in post/nut 1.5 in post/nut 1 in post/nut

VOLTAGE 14 VDC 14 VDC 28 VDC 28 VDC

ACCESSORIES

BLACK 71434B11 71434B13 71434B20 71434B21 71434B22 71434B23

14 VDC 28 VDC 28 VDC

15

EDMO#

long long short

weight: exposed height:

0.037 lb 0.95 in (with spacer) 0.875 in (without spacer) 0.10 mA @14 VDC & 28 VDC

current draw:

white white white

GRAY

WHELEN ENGINEERING CO, INC.

weight: dimensions:

01-0771450B11 01-0771450B21 01-0771450B23

01-0771434B11 01-0771434B13 01-0771434B20 01-0771434B21 01-0771434B22 01-0771434B23

white white red white red white

long short long long short short

14 VDC 14 VDC 28 VDC 28 VDC 28 VDC 28 VDC

01-0771434G11 01-0771434G13

white white

long short

14 VDC 14 VDC

70807000

70807000

LED post light hood

GRAY 71434G11 71434G13

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

301

Aircraft Lighting Instrument Lighting

A350CN SERIES POST LIGHTS

EDMO#

WHELEN ENGINEERING CO, INC.

MFR#

LENS COLOR

A350CNIWBK 01-0770119-06

These instrument post light assemblies illuminate the instrument panel and function as instrument mounting bolts. –– Includes connector nut

A350CNRDBA350CNSH28

01-0770119-13 01-0770119-17

instrument white red clear

POST HEIGHT

VOLTAGE

long

14 VDC

long short

28 VDC 28 VDC

ACCESSORIES A343

02-0350183-00

connector nut assembly

ELECTRO-LUMINESCENT (EL) INSTRUMENT LIGHTING SYSTEM A350CNCL28

weight: dimensions: power consumption: post height: approvals:

EDMO#

0.037 lb 0.875 in without spacer; 1.00 with spacer 0.2 amps @ 6 VDC, 0.08 amps @ 14 VDC, and 0.04 amps @ 28 VDC short: 1.875 in long: 2.375 in FAA/PMA approved

MFR#

LENS COLOR

POST HEIGHT

VOLTAGE

BLACK POST COLOR A350CN00

01-0770119-00

A350CN01 A350CN02 A350CN04 A350CN07 A350CN10 A350CN11

01-0770119-01 01-0770119-02 01-0770119-04 01-0770119-07 01-0770119-10 01-0770119-11

instrument white red clear red red red clear

long

6 VDC

long long short long short short

6 VDC 6 VDC 6 VDC 14 VDC 14 VDC 14 VDC

instrument white red clear instrument white red clear instrument white red red clear instrument white red clear instrument white red clear

long

6 VDC

long long short

6 VDC 6 VDC 6 VDC

short short long

6 VDC 6 VDC 14 VDC

long short short long

14 VDC 14 VDC 14 VDC 28 VDC

long long short

28 VDC 28 VDC 28 VDC

short short

28 VDC 28 VDC

clear clear instrument white instrument white

long long short

28 VDC 14 VDC 28 VDC

short

28 VDC

15

GRAY POST COLOR A350CN18

01-0770119-18

A350CN19 A350CN20 A350CN21

01-0770119-19 01-0770119-20 01-0770119-21

A350CN22 A350CN23 A350CN24

01-0770119-22 01-0770119-23 01-0770119-24

A350CN25 A350CN28 A350CN29 A350CN30

01-0770119-25 01-0770119-28 01-0770119-29 01-0770119-30

A350CN31 A350CN32 A350CN33

01-0770119-31 01-0770119-32 01-0770119-33

A350CN34 A350CN35

01-0770119-34 01-0770119-01

BLACK POST COLOR A350CNCL28 01-0770119-14 A350CNCLBK 01-0770119-08 A350CNIW28 01-0770119-12 A350CNIWB

302

01-0770119-15

1.800.235.3300 | edmo.com

U M A INC UMA’S instrument lighting systems use an electro-luminescent light strip (EL) housed within an easy to install bezel. The EL strip consists of a black injection-molded enclosure containing semiconductor crystals that convert electrical energy directly into light energy. The strip draws very low current, produces very little heat and is available in multiple colors (see table below). The bezel itself is easy to install; it can either be placed between the instrument and the panel or between the instrument panel and the overlay. –– Exceptionally long life, no bulbs to burn out –– Easy to install –– Lightweight, bulb-free, dimmable design –– 360° lighting

weight: temperature range: useful life: operating voltage: operating frequency: spectral output: bezel material:

EDMO#

MFR#

2-20-W

0.5 oz. -40 to 90°C over 3,000 hours 40-220 VAC 60-3000 Hz 500nM for aviation green @400 Hz ABS plastic

COLOR

DESIGN

STC/PMA

2-1/4 IN 2-20-G 2-20-W 2-21-W

2-20-G 2-20-W 2-21-W

green white white

knob cutout knob cutout no cutout

2-30-G 2-30-W 2-31-G 2-31-W 2-33-W 2-34-W 2-35-W 2-35-G

green white green white white white white green

knob cutout knob cutout no cutout no cutout center cutout double cutout vertical speed no cutout / recessed corner

3-1/8 IN 2-30-G 2-30-W 2-31-G 2-31-W 2-33-W 2-34-W 2-35-W 2-35-G

yes yes yes yes

ACCESSORIES 10-700-14 10-700-28 1G01-1

10-700-14 10-700-28 1G01-1

light wedge inverter, 14 V light wedge inverter, 28 V 1K ohms 5 watt, wire-wound potentiometer with on/off switch

EDMO DISTRIBUTORS

Aircraft Lighting Cabin Lights

BOLT LITE ASSEMBLIES

70339 SERIES INTERIOR DOME LIGHT ASSEMBLY

LUMINATOR AIRCRAFT PRODUCTS

WHELEN ENGINEERING CO, INC.

Luminator Bolt Lites are used to illuminate instrument faces ranging in size from 1-3 inches. They are commonly used in rheostat control dimming circuits. –– Standard non-glare black finish –– Requires no adapters or backing plates –– Available in either 14 or 28 volts

These interior dome/compartment light assemblies are designed for recessed overhead or wall mounting where minimal depth is available. –– Requires a 14 VDC #1414 lamp or a 28 VDC #1495 lamp –– Optional on/off switch

5100-CW-14 EDMO# 5100-CW-14 5102-CW14 5803-CW-28 59548NDCW2

MFR#

LENS

--5803CW28 59548NDCW28

instrument white instrument white instrument white instrument white

VOLTAGE 14 V 14 V 28 V 28 V

NVIS 5102-6-28

5102-6-28

NVIS green

28 V

weight: depth behind mounting flange: lamp wattage: power consumption:

EDMO# 7033901 7033903 7033904

0.16 lb 1.06 6 watts 0.46 amps @ 14 VDC, 0.3 amps @ 28 VDC

MFR#

VOLTAGE

01-0770339-01 01-0770339-03 01-0770339-04

14 VDC 14 VDC 28 VDC

SWITCH no yes yes

70813 SERIES LED CABIN LIGHT

CABIN LIGHTS LED DOME LIGHT WHELEN ENGINEERING CO, INC.

weight: exposed height: power consumption: LED color: lens:

EDMO# 7081312 MFR# 01-0770813-12 (E) This series of LED interior cabin lights are high quality, long lasting, and dimmer controllable, as well as being a modern alternative to the A360 series incandescent interior cabin lights. The series’ use of LED technology provides a long life, reduced power consumption compared to alternative light sources, shock and vibration resistance, and a small profile for shallower mounting depth. –– No EMI or RFI interference –– 60 LED dome light, 28 V

weight: mounting depth: dimensions:

0.1 lb 0.25 in 3 x 2.75 in

15

EDMO# 7114000 MFR# 01-0771140-00 LED light alternative to the Grimes 34170 dome light used on Bombardier Global Express, Challenger 600, 601, 604, Gulfstream GIII, GIV; Learjet 54, 56, 60 and Sikorsky S76. This lamp operates on 28 V with an emergency circuit at 5 V for long-life lighting on an alternative power source. –– Spun aluminum assembly 5.5 inches outer diameter, 3.83 inch recessed inner diameter with a 1-inch recessed depth –– Includes three (3) flying leads, a ground, a 5 V line, and a 28 V line

WHELEN ENGINEERING CO, INC.

0.35 lb 0.45 mm 125 mA @ 28 VDC, 250mA @ 5V aviation white translucent polycarbonate

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

303

Aircraft Lighting Cabin Lights

A315-HI SERIES COCKPIT UTILITY LIGHT

70820 SERIES LED MAP LIGHT

WHELEN ENGINEERING CO, INC.

WHELEN ENGINEERING CO, INC.

The A315-HI series consists of cockpit utility assemblies that rotate for convenience in reading maps and illuminating instrument panels. They are furnished with a right angle bracket for easier mounting. Available with instrument white (blue) lens, red, or clear. Uses a 14 or 28 VDC lamp.

The 70820 Series map/ reading light assemblies are designed to illuminate the cockpit or cabin. These versatile lights are easy to adjust with a 360° swivel base for and LED bulbs for life (approximately 20,000 hours), reduced power consumption, and a vibration-resistant design. –– Black anodized finish

7082003

A315HIW2

weight: dimensions: power consumption:

EDMO# A315HIB1 A315HIB2 A315HIR1 A315HIR2 A315HIW1 A315HIW2

0.07 lb 0.93 × 0.87 × 2.2 in 0.46 amps @ 14 VDC, 0.3 amps @ 28 VDC

MFR#

VOLTAGE

01-0770113-04 01-0770133-05 01-0770113-00 01-0770113-01 01-0770113-02 01-0770113-03

LENS COLOR

14 VDC 28 VDC 14 VDC 28 VDC 14 VDC 28 VDC

instrument white instrument white red red white white

weight: dimensions: power consumption:

EDMO# 7082002 7082003 7082005 7082006 7082007

0.19 lb 2.66 dia × 1.34 × 1.13 in 0.02 amps @ 14 VDC 0.02 amps @ 28 VDC

MFR#

LED COLOR

01-0770820-02 01-0770820-03 01-0770820-05 01-0770820-06 01-0770820-07

white white red blue blue

VOLTAGE 28 VDC 28 VDC 28 VDC 14 VDC 28 VDC

LED ADJUSTABLE MAP LIGHT A315-LO SERIES COCKPIT UTILITY LIGHT WHELEN ENGINEERING CO, INC. Similar to the A315-HI series, the A315-LO series light assemblies rotate for convenience in reading maps and illuminating instrument panels. Optional right angle mounting brackets are available for easier mounting. Uses a 14 VDC or 28 VDC lamp.

15

A315LO14 weight: dimensions: power consumption:

WHELEN ENGINEERING CO, INC.

EDMO# 7114416 MFR# 01-0771144-16 This gooseneck style adjustable reading light is equipped with rheostat controlled light intensity operable with a simple pushbutton switch. –– Aviation white LED –– Fixed position black nylon hood

weight: length: power consumption:

0.46 lb 16 in 0.06 amps @ 28 VDC

0.06 lb 0.81 × 0.81 × 2.18 in 0.33 amps @ 14 VDC, 0.17 amps @ 28 VDC

Not finding what you need? EDMO# A315LO14 A315LO28

304

MFR#

VOLTAGE

01-07701606-00 01-0770106-01

14 VDC 28 VDC

1.800.235.3300 | edmo.com

EDMO carries a wide range of aircraft lighting options; so, if the part you are looking for isn’t listed in our catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

EDMO DISTRIBUTORS

Aircraft Lighting Dimmers

DIMMERS

voltage/current: approvals:

MAXDIM LIGHTING CONTROLLERS SEATON ENGINEERING CORP Ideal for aircraft lighting and instrument panels, the MaxDim solid state lighting controllers/dimmers have hundreds of DC lighting control applications. MaxDim controllers can be used with standard incandescent, halogen, and pre-inverter electroluminescent strips, high intensity LED lights, Nulites, and cabin glare shield LED strips. Full STC-PMA approval.

EDMO# 9100-001-E 9100-001-F

5-35 VDC 0-5 amps ‘E’ and ‘F’ models per channel RTCA/DO-160E, part 21 EMI Qualified STC/PMA

MFR#

CONNECTORS

9100-001-E 9100-001-F

ring terminals spade terminals

MICRODIM SINGLE CONTROL SEATON ENGINEERING CORP

9100-001-A

weight: dimensions: voltage/current:

EDMO#

9100-001-D

0.58 oz Single: 1.25 × 1.25 in Dual: 1.6 × 1.6 in Single: 12-35 VDC @ 12.5 amps ‘A’; 15 amps ‘B’ 0-12.5 amps ‘A’; 0-15 amps ‘B’ Dual: 12-35 VDC @ 15 amps ×2 0-15 amps per circuit

MFR#

EDMO# 9100-001ID MFR# 9100-001-I OPT L-11 Seaton Engineering’s smallest panel dimmers, the MicroDim lighting controllers provide excellent LED lighting control—making them ideal for night vision use in helicopters. They are compatible with Nulites, UMA dimmers, Avion glare shield dimmers and LED-lit panels. DO-160G EMI tested. –– Connectors: ring terminals

weight: dimensions: voltage/current:

1.31 oz 1.6 × 1.6 in 5-35 VDC 7.5 amps per channel

CONNECTORS

SINGLE CONTROL CIRCUIT 9100-001-A 9100-001-B

9100-001-A 9100-001-B

spade terminals ring terminals

INSTRUMENT LIGHT DIMMING KIT

DUAL CONTROL CIRCUIT 9100-001-C 9100-001-D

9100-001-C 9100-001-D

spade terminals ring terminals

MAXDIM MINI LIGHTING CONTROLLERS SEATON ENGINEERING CORP

dimensions: breaker:

9100-001-E

current:

EDMO# 9100-001-F

weight: dimensions:

AL697-1 AL697-2

AL697-1

1.75 × 1.25 × 4.25 in (AL697-1) 3 × 1.25 × 4.75 in (AL697-2) 2 amp @ 14 V, 1-1/2 amp @ 28 V (AL697-1) 7.5 amp @ 14 V, 4 amp @28 V (AL697-2) 1.4 amps @ 14 V, 0.7 amps @ 28 V (AL697-1) 4 amps @ 14 V, 2 amps @28V (AL697-2)

MFR# AL697-1 AL697-2

15

The MaxDim Mini is a compact, lightweight, solid-state dimmer that is ideal for tight panel spaces. Provides control for LEDs, Nulite dimmers, UMA dimmers, and Avion Glare shield dimmers as well as hundreds of other DC lighting applications. Complies with Cessna AD 93-24-15 regarding cockpit fires.

MIL-SPEC light dimming rheostat kit has a power transistor mounted to a heat-sink and wiring harness. –– Kit includes: rheostat, wiring harness, and dimmer module

WATTS/VOLTAGE 20W/0-32 VDC 56W/0-32 VDC

1 oz 0.85 × 0.85 in

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

305

Aircraft Lighting

Anti-Collision & Position Lights LD12 SERIES LIGHT DIMMER COBHAM The LD12 light dimmer series are remote-mounted modules for use in GPS systems. These units control up to 12 independent lamps with full test function. The LD12 can output up to 1 amp of current when used as a bulk lamp dimmer. –– Adjustable lamp dimmer LD12-001 drives twelve separate 28 VDC/50 mA lamp lines –– Dimmer can be operated in the preset mode (12-24 V range) or as an adjustable dimmer using an external control; a single switch can select day, night, and lamp test functions –– Day operation mode proLD12 IKC vides regulated 24 VDC for all lamps to prevent early lamp failure and internal lamp blackening from excessive voltage –– Gold plated interconnect and relay contacts –– Relays are sealed, dry nitrogen-filled units rated for high vibration –– Circuit boards are constructed with G10-FR flame retardant material with solder masks, reflowed tin plating, and environmental post-coating

weight: current draw: input power: operating temperature: altitude: approvals:

0.84 lb 5 × 3.95 × 1.75 in +24.8 VDC to +30 VDC, +27.5 VDC nominal (reverse and over voltage protection) -15°C to +70°C 50,000 ft DO-160C, Cat. B,M,N (vibration)

ANTI-COLLISION & POSITION LIGHTS ORION SERIES LED LIGHTING WHELEN ENGINEERING CO, INC.

OR5001V

OR6501GE

EDMO#

MFR# LD12-001 LD12-002

light dimmer/12 circuits light dimmer

D50SV-IKC

LD12 install kit/crimp

lens: approvals:

ACCESSORIES

15

LD12-IKC

OR6501G

The Orion 600/650/500 series are self-contained, position/anti-collision lights equipped with super-bright LEDs and a replaceable, hard-coated polycarbonate lens to maintain maximum light output. These LED position/anti-collision lights eliminate the need for external flasher boxes, and they are flush mountable and able to accommodate a wide variety of applications. The 600 and 650 series are for wingtip mounting; the 500 series is designed for mounting on the tail; all have an aerodynamic design.

weight: current draw:

LD12-001 LD12-002

OR6001G

Not finding what you need? EDMO carries a wide range of aircraft lighting options; so, if the part you are looking for isn’t listed in our catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock. EDMO#

0.28 lb 12 V / 28 V, 0.20 / 0.10 amp (position) 0.38 / 0.19 amp (anti-collision) clear hardcoated polycarbonate ORION 500 FAA TSO-C96a Class II / TSO-C30c Type III ORION 600 FAA TSO-C96a Class II / TSO-C30c Type II & III (OR6001G/ G2) FAA TSO-C96a Class II / TSO-C30c Type I & III (OR6001R/2R) ORION 650 FAA TSO-C96a Class III / TSO-C30c Type I (OR6501R/2R) FAA TSO-C96a Class III / TSO-C30c Type II (OR6501G/2G) ORION 650E FAA TSO-C96a Class II / TSO-C30c Type II & III (OR6501GE/2GE) FAA TSO-C96a Class II / TSO-C30c Type I & III (OR6501RE/2RE)

MFR#

VOLTAGE

MOUNT

COLOR

ORION 500 OR5001V OR5002V

01-0771774V01 01-0771774V02C

12 VDC 28 VDC

vertical tail vertical tail

white white

01-0771733-01

12 VDC

wingtip

green

ORION 600 OR6001G

306

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Aircraft Lighting

Anti-Collision & Position Lights

EDMO# OR6001R OR6002G OR6002R

MFR#

VOLTAGE

MOUNT

COLOR

01-0771733-02 01-0771733-11 01-0771733-12

12 VDC 28 VDC 28 VDC

wingtip wingtip wingtip

red green red

01-0790725-01 01-0790725-02 01-0790725-11a 01-0790725-12A

12 VDC 12 VDC 28 VDC 28 VDC

wingtip wingtip wingtip wingtip

green red green red

01-0790701-01C 01-0790701-02C 01-0790701-11C 01-0790701-12c

12 VDC 12 VDC 28 VDC 28 VDC

embedded embedded embedded embedded

green red green red

ORION 650 OR6501G OR6501R OR6502G OR6502R

ORION 650E OR6501GE OR6501RE OR6502GE OR6502RE

COMETFLASH® STROBE LIGHT

weight: dimensions: power consumption: lens colors: lens: approvals:

EDMO#

MFR#

EDMO#

HRCFAR HRCFAS

01-0770029-29 01-0770029-31 01-0770879-00

A440

19-130074-009D

A469B

01-0770044-02W

A402ADW

68-21705041-30

1.5 lb 8 in high × 3.7 in diameter 3.2 amps @ 14 VDC, 1.6 amps @ 28 VDC

MFR#

COLOR

7028521 01-0770285-40

TYPE

red red

RFI shielded -

ACCESSORIES 7087900

HRCFADSM

01-0770879-00

HRCFAR

Model 70879 series power supply operates up to three CometFlash® strobe light heads at 36 joules. Meets FAA requirement of 400 effective candlepower when used in conjunction with the Whelen A612 lens/flashtube configuration. TSO-C96a

70875 SERIES FORWARD POSITION LIGHTS WHELEN ENGINEERING CO, INC. This series of forward position lights use solid-state LEDs which provide a usable life of up to 20,000 hours.

POST COLOR standard assembly, split red/white lens, RFI shielded with MS connector standard assembly, red lens standard assembly, split red/white lens

ACCESSORIES 7087900

7028521

Model 70879 series power supply operates up to three CometFlash® strobe light heads at 36 joules. Meets FAA requirement of 400 effective candlepower when used in conjunction with the Whelen A612 lens/ flashtube configuration. TSO-C96a fuselage mounting adapter for fuselage installations for the HRCFA and SACF series; PMA strobe tube assembly replacement designed for use with HRCFA and A470A series white lens/RFI shielded

EDMO DISTRIBUTORS

weight: exposed height: length: power consumption:

EDMO# 7087501 7087502

0.26 lb 1.39 in 3.92 in 0.35 amps @ 28 VDC

MFR#

15

01-0770029-389

The self-contained CometFlash® strobe anti-collision light uses the same lens/reflector and strobe tube as the model HRCFA. However, this light differs in that its vibration resistant, heavy-duty construction is designed for use in helicopter applications. –– Equipped with a fixed mounting adapter and an MS input connector –– FAA approved as a direct replacement for any rotating beacon that uses a 2-2/4-inch diameter mounting hole –– Operates between 10 to 30 VDC

7028521 7028540

1.5 lb 7.25 × 3.7 in diameter 3.2 amps @ 14 VDC 1.6 amps @ 28 VDC aviation red, aviation white, and aviation red/white (split) hard-coated polycarbonate FAA/PMA

HRCFADSM

WHELEN ENGINEERING CO, INC.

weight: dimensions: power consumption:

WHELEN ENGINEERING CO, INC. The HRCFA Series self-contained CometFlash® strobe anti-collision lights are unique polycarbonate optic lens and reflector designs that redirect stray light rays into the horizontal plane to provide 360° of uniform lighting. Designed for use as a direct replacement for any rotating beacon that uses a 3-3/4 inch diameter mounting hole. May be installed in the vertical fin or the fuselage (requires the A440 mounting adapter). Operates in 10 – 30 VDC.

COMETFLASH® STROBE FOR HELI AIRCRAFT

COLOR

01-0770875-01 01-0770875-02

green red

68-3970873-30

clear lens for 70875 series

ACCESSORIES 7087330

1.800.235.3300 | edmo.com

307

Aircraft Lighting

Anti-Collision & Position Lights LED TAIL/AFT POSITION LIGHTS

70980 SERIES SELF-CONTAINED LED LIGHT ASSEMBLY

WHELEN ENGINEERING CO, INC.

WHELEN ENGINEERING CO, INC.

The 71554-series LED tail lights are available in horizontal or vertical mounts and fit the existing footprint for Whelen Models A555A and 71011 tail lights. –– Models -01 and -02 come with flying leads –– Model -03 has a pin and a ring terminal for connections

The model 70980 Series consist of self-contained IR LED anti-collision lights that are regularly used on military aircraft platforms, marine settings, and can be easily adapted for use in the NVG environment. Tested to DO160 environmental standards. –– Shipped with flying leads –– Lower mount has drain hole in lens 7098000

weight: dimensions: current draw:

0.14 lb 1.4 × 1.59 × 2.07 in 0.13 amps @ 28 VDC 0.26 amps @ 14 VDC clear hard-coated polycarbonate aviation white

lens: LED color:

EDMO# 7155401 7155402 7155403 7155411 7155412

MFR#

VOLTAGE

01-0771554-01 01-0771554-02G 01-0771554-03 01-0771554-11 01-0771554-12

28 VDC 28 VDC 28 VDC 14 VDC 14 VDC

weight: dimensions: power consumption: LED: lens:

MOUNT STYLE horizontal vertical vertical horizontal vertical

EDMO# 7098000 7098001

1 lb 4.04 × 3.6 in 0.1 amps @ 28 VDC infrared (875 nm) clear hard coated polycarbonate

MFR#

MOUNTING SPECIFICATIONS

7098000 01-0770980-01

upper mount lower mount

71011 SERIES LED TAIL POSITION LIGHTS WHELEN ENGINEERING CO, INC.

71105 SERIES LED POSITION LIGHT ASSEMBLY

The model 71011 Series LED tail position lights are designed to replace existing older-model taillights typically seen mounted on general aviation, corporate, and helicopter applications. These lights provide all of the advantages inherent in LED lighting including improved reliability and reduced operating costs.

WHELEN ENGINEERING CO, INC.

15

The 71105 series are fully FAA TSO compliant Forward Position lights equipped with LEDs for reduced current draw over conventional light bulbs. These LEDs are designed as a direct replacement for Whelen Model W1285 series lights.

weight: exposed height: LED navigation power consumption: LED color(s): lens:

0.25 lb (28 V version) 2.7 in 0.25 amps @ 14V or 28 V aviation red/green clear polycarbonate

weight: dimensions: power consumption: LED color: mounting hole pattern: approvals:

EDMO# EDMO# 7110503 7110504

308

7101102

MFR# 01-0771105-03 01-0771105-04

VOLTAGE 28 V 28 V

COLOR

7101102 7101103

0.2 lb 1.36 in high 0.5 amps @ 14 VDC; 0.3 amps @ 28 VDC aviation white 1.75 in FAA/TSO-C30c Type III

MFR# 01-0771011-02 01-0771011-03

VOLTAGE 28 VDC 28 VDC

MOUNTING SPECIFICATIONS aft position light/vertical aft position light / horizontal

green red

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Aircraft Lighting

Anti-Collision & Position Lights 71110 SERIES STROBE ANTI-COLLISION/ LED POSITION LIGHT ASSEMBLY WHELEN ENGINEERING CO, INC. The Model 71110 Series is a wingtip mounted strobe anti-collision/position light assembly that uses LEDs for the forward position lights. LEDs provide a significant reduction in current draw over conventional position light bulbs. The strobe light lens assembly is radio shielded for maximum EMI/ RFI protection. –– Navigation light portion is wired with flying leads –– Direct replacement for Whelen model A650PG/ PR series

weight: exposed height: power consumption: LED color: lens: approvals:

EDMO# MB2G MB2R

MFR#

WATTS/VOLTAGE

01-0771519-01 01-0771519-02

14 VDC 14 VDC

COLOR green red

70509 SERIES FLASHER WHELEN ENGINEERING CO, INC. The 70509 Series is comprised of a self-contained, halogen, flashing anti-collision (strobe) light with the same mounting pattern as the factory installed beacon on a single-engine Cessna 1967 and later.

7111003

0.45 lb (14 V), 0.5 lb (28 V) 2.7 in 0.25 amps @ 14 V or 28 V aviation red/green clear, RFI coated glass: strobe clear polycarbonate: navigation lights STC SA800EA/FAA TSO-C96a, TSO-C30c Type II

weight: dimensions: power consumption:

EDMO# 7050907

0.27 lb 3.75 in high × 2.65 in diameter 2.7 amps @ 14 VDC, 1.3 amps @ 28 VDC

MFR#

DESCRIPTION

7050907

red with mask

5043300 A402AS

14 V lamp assembly red and white lens assembly

ACCESSORIES EDMO# 7111003 7111004 7111005 7111006

MFR#

5043300 A402AS

VOLTAGE/COLOR

01-0771110-03 01-0771110-04 01-0771110-05 01-0771110-06

28 VDC / green 28 VDC / red 28 VDC / green 28 VDC / red

36-0050628-00

flashtube assembly

71379 SERIES LED FORWARD POSITION LIGHT

ACCESSORIES 36-005062-

WHELEN ENGINEERING CO, INC. The 71379 series are LED W1250 wingtip forward position lights designed to be located under a fairing that is also suitable for external mounting as well. Replaces GRIMES A1815A and Whelen W1250. –– Available in 28 VDC or 14 VDC version –– Ships with six flying leads

MICROBURST II WINGTIP NAV LIGHT ASSEMBLY WHELEN ENGINEERING CO, INC.

EDMO DISTRIBUTORS

7137901

MB2G

weight: dimensions: power consumption: voltage: approvals:

15

The MicroBurst series LED wingtip lights are lightweight, low current, water and vibration resistant, and exceptionally bright for experimental or LSA aircraft. This variant of the MicroBurst series is green. –– Low current, long life, lightweight –– Self-contained (no external power supply needed) –– Aerodynamic design is resistant to vibration and moisture –– Synchronizable –– Replaceable lenses –– Super bright, rivaling strobe in impact –– Available with CometFlash®, the lighting concept that revolutionized aviation lighting

0.5 lb 2.31 × 1.25 × 1.75 in 0.3 amps 28 VDC 7137901/7137911:LED Fwd POS (Green) FAA TSOC96a,TSO-C30c Types II 7137902/7137912: LED Fwd POS (Red) FAA TSOC96a, TSO-C30c Types I

MB2R EDMO# 7137901 7137902

MFR# 01-0771379-01 01-0771379-02

1.800.235.3300 | edmo.com

COLOR/VOLTAGE green/28 VDC red/28 VDC

309

Aircraft Lighting

Anti-Collision & Position Lights

EDMO# 7137911 7137912

MFR#

COLOR/VOLTAGE

01-0771379-11 01-0771379-12

green/14 VDC red/14 VDC

weight: dimensions: current draw: lenses:

0.65 lb 1.87 × 5.69 × 2.7 in (exposed height) 0.25 amps @ 28 VDC clear RFI coated glass (strobe) clear polycarbonate (navigation lights)

90088 SERIES LED ANTI-COLLISION LIGHT WHELEN ENGINEERING CO, INC. The model 90088 series self-contained anti-collision beacons are constructed with solid-state circuitry and LED technology that makes them an excellent replacement for older-style mechanical oscillating beacons and the Whelen 90044 series quartz halogen flashing beacons. These beacons have no moving parts, no EMI/RFI, and no inrush current spikes. Several versions available to accommodate different mounting patterns.

weight: height: power consumption: LED color: lens color: approvals:

EDMO#

1.8 lb nom. 9.87 × 2.70 in exposed height 0.45 amps @ 28 VDC aviation red clear glass FAA design conformity RTCA/DO-160d TSO-C96a Class III approved

MFR#

MOUNT

INCLUDES

28 VDC 9008813 9008815 9008816 9008817 9008818 9008819

01-0790088-13 01-0790088-15 01-0790088-16 01-0790088-17 01-0790088-18 01-0790088-19

upper / 5 hole lower / 5 hole upper / 5 hole lower / 5 hole upper / 8 hole lower / 8 hole

rudder mount MS27508E 10A-5P connector MS27508E 10A-5P connector 2 drain holes (Hawker 800) cable pigtail cable pigtail

90340 SERIES STROBE & ANTI-COLLISION LIGHT

15

WHELEN ENGINEERING CO, INC.

310

The 90340 Series is comprised of wingtip mounted strobe anti-collision/position lights that use LEDs for the forward and tail position lights, which eliminates the need for a tail-mounted position light. This series is a direct replacement (exact footprint) for the Whelen Model A600PG/PR series but does not require 9034004 replacement the current strobe power supply. The strobe light assembly is radio shielded for maximum EMI/RFI protection. Both the forward and tail nav on the 28 VDC version can be operated with a single set of flying leads. –– Includes 3 feet of braided, bonded protection. –– Designed for composite wingtip structure.

1.800.235.3300 | edmo.com

EDMO#

MFR#

LENS COLOR

28 VDC 9034003 9034004

01-0790340-03 01-0790340-04

green red

14 VDC versions available; go to edmo.com for more details.

POSITION LIGHT ASSEMBLY WHELEN ENGINEERING CO, INC. The W1250 Series are wing tip position lights designed for use under a wing tip fairing that uses a 26-watt incandescent lamp. It is a direct replacement for the brand G A1815A Series. Available in 14 or 28 VDC.

weight: dimensions: power consumption: approvals:

EDMO# W1250PG1 W1250PR1 W1250BPG28 W1250BPR28

0.3 lb 1.25 × 2.75 in 2 amps @ 14 VDC, 1 amp @ 28 VDC FAA/TSO-C30b Type I (

MFR# 01-0770082-02 01-0770082-00 01-0770082-07 01-0770082-05

VOLTAGE 14 V 14 V 28 V 28 V

COLOR green red green with black housing red with black housing

90377 SERIES LED POSITION LIGHT ASSEMBLY WHELEN ENGINEERING CO, INC. Model 90377 Series is a wing tip mounted LED position light assembly for use in both the forward and tail position lights (this eliminates the need for a tail mounted position light). –– Direct replacement (exact footprint) for the Whelen model A675PG/PR series –– One set each of flying leads required for both the forward and tail nav on 14 V version

9037701

9037702.tif

EDMO DISTRIBUTORS

Aircraft Lighting Beacons

71080 SERIES LED BEACON weight: dimensions: power consumption: lens: LED colors:

EDMO# 9037701 9037702

WHELEN ENGINEERING CO, INC.

0.35 lb 1.08 × 1.87 × 5.69 in 0.5 amps clear polycarbonate red, green, white

MFR#

LENS COLOR

01-0790377-01 01-0790377-02

green red

VOLTAGE 14 VDC 14 VDC

28 VDC versions available.

BEACONS 7090501 SERIES LED BEACON WHELEN ENGINEERING CO, INC.

EDMO# 7090501 MFR# 01-0770905-01 The model 70905 series are self-contained anti-collision lights for rotorcraft that do not require an external power unit. All units in this series meet the minimum requirements stated in FAR parts 27 and 29 for anti-collision light systems used on rotorcraft, Ref; Class I (150 effective candela) of SAE AS8017a minimum performance. Part 7090501 replaces existing beacons with a 5-hole mounting pattern on a 4.656 diameter bolt circle and incorporates an MS3102R10SL-3P connector for input.

weight: dimensions: power consumption: LED color:

1.4 lb 4.04 × 3.66 in 0.45 amps @ 28 VDC aviation red

7108001 7108008 The model 71080-Series LED beacons are self-contained LED anti-collision lights designed to replace existing beacons that use a 2-1/2 diameter footprint as well as remote-mounted strobe lights (which allows for the removal of the strobe power supply). The 71080 series is designed to replace a range of products, please refer to the mounting specifications below

weight: dimensions: power consumption: LED color: lens: approvals:

EDMO#

MFR#

0.6 lb 3.64 × 2.6 × 4.61 in 0.28 amps average @ 28 VDC aviation red aviation clear, polycarbonate FAA TSO-C96a Class I

MOUNTING SPECIFICATIONS 28 VOLTS

7108001 7108004 7108007 7108008 7108015 7108017 7108018 7108030

01-0771080-01 01-0771080-04 01-0771080-07 01-0771080-08 01-0771080-15 01-0771080-17 01-0771080-18 01-0771080-30

7108051 7108055

01-0771080-51 01-0771080-55

A470A mount 5-hole adapter, flying leads 3.75-inch adapter, MS connector, lower 5 hole adapter, MS connector 3.75-inch adapter, flying leads, lower 3.75-inch adapter, MS connector, lower 5 hole adapter, MS connector EC120, 130, 135 adapter, MS connector

14 VOLTS A470A mount, Mate-N-Lock connector 3.75-inch adapter, flying leads

Not finding what you need?

15

EDMO carries a wide range of aircraft lighting options; so, if the part you are looking for isn’t listed in our catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

71410 SERIES LED BEACON WHELEN ENGINEERING CO, INC. The 71410-series LED white anti-collision beacons are FAA TSO compliant and self-contained LED lights that meet rotorcraft minimum ACL standards Class I, 150 effective Cd. These anti-collision lights replace Whelen’s HRCFA/ SACF style strobe units, rotating beacons, and model A470(A). Ships with 12 long flying leads, available in 28 V only.

7141001

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

311

Aircraft Lighting Beacons

weight: dimensions: power consumption: voltage: color: approvals:

EDMO# 7141001 7141005 7141008 7141015

0.75 lb 3.4 in high × 3.6 in diameter 0.32 amps 28 VDC white TSO-C96a, CLASS III

MFR#

MOUNT

01-0771410-01 01-0771410-05 01-0771410-08 01-0771410-15

2.75-inch 3.75-inch 5-inch plate 3.75-inch plate

POSITION upper upper upper lower

power consumption: LED color: approvals:

CONNECTOR MS connector -

71055 SERIES LED BEACON WHELEN ENGINEERING CO, INC.

EDMO# 7105501 MFR# 7105501 Model 71055 series beacons are self-contained LED anti-collision lights that are designed to replace existing quartz halogen flasher beacons found in original equipment installations on single-engine Cessnas from 1967 and later. These lights may also replace remote-mounted strobe lights—thus allowing for the removal of the strobe power supply. –– Internal mounting plate provided with choice of mounting holes to retrofit most existing mounting patterns

weight: dimensions: power consumption: LED color: lens: approvals:

0.52 lb 3.09 x 2.6 in 01-0771055-00 - 1.2 Amps Avg. / 01-0771055-01 0.6 Amps Avg. aviation red clear polycarbonate STC SA615EA, FAA/TSO-C96a Class III

FIXED WING LED BEACON/28V

15

WHELEN ENGINEERING CO, INC.

EDMO# 7090005 MFR# 7090005 The model 7090005-series LED beacons are self-contained anti-collision lights for fixed wing aircraft that do not require an external power unit and do not produce EMI or RFI. These beacons replace existing light assemblies with a 3-3/4 inch mounting patterns (Whelen HRCFA series, 90081 Series, and old style rotating beacons); use the same mounting hole pattern with no need for modification to the aircraft required.

weight: dimensions:

312

0.85 amps @ 14 VDC (01-0770900-04) 0.425 amps @ 28 VDC (01-0770900-05) aviation red Meets minimum requirements stated in FAR Parts 23 and 25 for anti-collision light systems used on fixed wing aircraft, Ref; Class III (100 effective candela) of SAE AS8017a minimum performance standards. STC SA615EA approved

90520 SERIES LED BEACON WHELEN ENGINEERING CO, INC. 90520 series LED beacons are FAA TSO compliant, self-contained LED anti-collision lights. They are meant as replacements for strobe lightheads as small as the A470A with available models to replace HR self-contained beacons (HRCFA) or our legacy 70900 LED beacon. –– Mounting plate included with assembly –– Red and white LED color

weight: dimensions: current: lens: approvals:

EDMO#

0.65 lb (295 gm) 3.74 in exposed height × 2.6 in diameter 0.67 amps average; 3 amps peak clear polycarbonate FAA TSO-C96a Class III

MFR#

MOUNTING DETAILS

28 VDC 9052001 9052004 9052005 9052007 9052008 9052014 9052015 9052017 9052018

01-0790520-01 01-0490520-04 01-0790520-05 01-0790520-07 01-0790520-08 01-0790520-14 01-0790520-15 01-0790520-17 01-0790520-18

A470A mount, flying leads 5 hole adapter with flying leads 3.75-inch adapter with flying leads 3.75-inch adapter with MS connector 5 hole adapter, MS connector 5 hole adapter, flying leads, lower 3.75-inch adapter, flying leads, lower 3.75-inch adapter, MS connector, lower 5 hole adapter, with MS connector, lower

Not finding what you need? EDMO carries a wide range of aircraft lighting options; so, if the part you are looking for isn’t listed in our catalog, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

1.1 lb 3.1 × 2.8 in

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Aircraft Lighting

Taxi, Landing & Recognition Lights 71485 SERIES COVERT IR/RED COMBINATION BEACON WHELEN ENGINEERING CO, INC. The 71485-Series is a combination aviation red visible and IR flashing beacon that can be surface-mounted in an area as small as 2.75 inches and has an adapter to drop into a 3.75-inch recessed mount, if needed. Nominal IR LEDs at 875 nm. Unit ships with 18 flying leads, independent control for Red and IR LED packages.

weight: dimensions: amps @ volts:

beam candlepower: approvals:

EDMO# weight: dimensions: voltage: lens: LED color:

EDMO#

0.670 lb 3.5 in high × 3.66 base width 28 VDC clear polycarbonate aviation red & IR

MFR# 7148500 01-0771485-01

VOLTAGE/BULB COLOR 28 VDC/red 28 VDC/red

MFR#

VOLTAGE

TYPE

PAR36 P36P1L P36P1T P36P2L P36P2T

01-0771833-10B 01-0771833-15B 01-0771833-20B 01-0771833-25B

14 VDC 14 VDC 28 VDC 28 VDC

landing (spot light, 10°) taxi (spreader optic, 40°) landing (spot light 10°) taxi (spreader optic, 40°)

01-0790750-100 01-0790750-200

14 VDC 28 VDC

landing (spot light, 10°) landing (spot light, 10°)

PAR46 P46P1L P46P2L

7148500 7148501

0.52 lb (PAR36) 1 lb (PAR46) 4.38 round × 1.75 in face to screw terminal (PAR 36) 5.65 round × 2.25 in face to screw terminal 0.68 amps @ 28 VDC (P36P2L/2T) 1.36 amps @ 14 VDC (P36P1L/1T) 1.3 amps @ 28 VDC (P46P2L) 2.6 amps @ 14 VDC (P46P1L) P36 landing: 60,000 P36 taxi: 15,000 P46: 105,000 STC/PMA

BASE 3.75 in 2.6 in

71125 SERIES LED RECOGNITION LIGHT WHELEN ENGINEERING CO, INC. The model 71125 series LED recognition light provides supplemental lighting for several aircraft applications. These lights withstand vibration, require low current draw, produce no EMI/RFI, and produce little heat. These lights are available with several different beam spreads and are designed to replace the Whelen A775 series; additionally, they can be used in conjunction with the 71115 flasher control assembly.

TAXI, LANDING & RECOGNITION LIGHTS PAR36/46 LANDING LIGHTS WHELEN ENGINEERING CO, INC.

weight: dimensions: power consumption: LED color: lens:

PAR36

EDMO# 7112510 7112522 7112550

0.3 lb 3.25 × 1.25 × 1.95 in 0.9 amps @ 14 V, 0.45 amps @ 28 aviation white clear polycarbonate

MFR# 01-0771125-10 01-0771125-22 01-0771125-50M

VOLTAGE 14 V 28 V 28 V

15

The Parmetheus™ Plus series LED landing lights are drop-in replacements for outdated halogen or HID lamps. The Parmetheus™ Plus lights are 40% brighter than the original Parmetheus™ lights and are lightweight, low current, moisture resistant, and capable of providing stable light for thousands of hours. –– Equipped with Whelen TIR (Total Internal Reflector) technology that combines spot and flood lighting for improved intensity and effectiveness –– Drop-in design incorporates a clocking notch and power wiring that attaches to brass screw terminals –– Weight is comparable to older/previous lamps –– Moisture-resistant design with a hard-coated, polycarbonate outer lens and metal, heat-dissipating housing

7112522

BEAM SPREAD 10 degree 90 degree 20 degree

PAR46

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

313

Aircraft Lighting

Taxi, Landing & Recognition Lights 71259 SERIES LED INTERIOR/LANDING/ TAXI/RECOGNITION LIGHT

90361 SERIES ROUND LED LANDING LIGHT

WHELEN ENGINEERING CO, INC.

The 90361 Series is a self-contained, all-LED landing light assembly that can be used as a taxi/landing light on a wide variety of aircraft and is designed to retrofit existing typical PAR-36 lighting. All current source and electronic circuitry is contained within the housing and the outer lens allows for mounting externally on the aircraft (optional diffusion lens available upon request). –– Includes flying leads

The 71259 Series interior LED lights are designed for use as a stand-alone or they can be attached to other Whelen LED lighting products for use in landing, taxi, or recognition light applications when used behind an aircraft outer lens. This assembly ships with two sets of 10-inch, 18 ga. leads and terminates with A444 style connectors. –– 10, 20, and 30-degree optic lighting spreads for these assemblies –– 28 VDC only

weight: dimensions: current draw: LED color: lens:

EDMO# 7125900 7125901

0.65 in 3.25 × 3.90 × 2.05 in 1.25 amps white clear polycarbonate

MFR# 01-0771259-00 01-0771259-01

BEAM SPREAD 10 degree landing / 20 degree taxi 10 degree landing / 30 degree taxi

LED LANDING LIGHT/TAXI LIGHT WHELEN ENGINEERING CO, INC.

15

EDMO# 9035220 MFR# 01-0790352-20 Model 90352 is a self-contained LED landing light assembly for use as a landing/taxi light on a wide variety of aircraft. The unit is mounted internally behind the existing lens and all current source and electronic circuitry is contained within the unit’s housing. Available in several mounting configurations to retrofit existing typical PAR-46 lighting.

weight: dimensions: power consumption: color: lenses:

WHELEN ENGINEERING CO, INC.

weight: dimensions: power consumption: lens:

EDMO# 9036110 9036120

MFR#

VOLTAGE

01-0790361-10 9036120

14 V 28 V

MOUNTING STYLE U bracket 4-inch round

IR LANDING LIGHT WHELEN ENGINEERING CO, INC.

EDMO# 9054000 MFR# 01-0790540-000 Model 90540 is an infrared illumination product that produces a 24-degree beam. Model 90540 has demonstrated effectiveness for helicopters and reciprocating engine airplanes during takeoff, landing, and off-airport locations. Enhances the effectiveness of NVG goggles by producing IR illumination at 875 nm nominal.

2.2 lb 3.18 × 5.9 in diameter 3 amps @ 28 VDC black finish clear polycarbonate weight: dimensions: current: lens:

314

1.3 lb 2.87 × 4.7 in dia. 1.5 amps @ 28 VDC clear polycarbonate

1.800.235.3300 | edmo.com

15. lb 4.7 × 1.86 inches 2 amps @ 28 VDC clear hard-coated polycarbonate

EDMO DISTRIBUTORS

Aircraft Lighting Lighting Accessories

90569 SERIES LED FORWARD & AFT POSITION & ANTI-COLLISION LIGHT WHELEN ENGINEERING CO, INC. The 90569 Series is an incredibly small all-LED 400 effective POS/ ACL assembly with integrated red LED ground recognition lights. 90569 is an LED head assembly only, and is powered by Whelen model 71457 flasher/ current source. –– Direct mechanical replacement for A600/90340 (with adapter) –– Ships with 12 inches of cable wiring into an amp connector –– Available in 28 VDC only

weight: dimensions: current: color: lens: approvals:

0.5 lb 5.61 × 1.77 × 2.01 in 0.3 amps fwd & aft pos, 0.85 amps average ACL red, green clear polycarbonate TSO-C96a Class II and TSO-C30c

function modes:

EDMO#

X - both circuits off S - starboard (right) on only P - port (left) on only S+P - both circuits On A44 - alternate 44 PPM (STD) B44 - both flash 44 PPM A88 - alternate 88 PPM A120 - alternate 120 PPM

MFR#

9200-000-A 9200-000-B

9200-000-A 9200-000-B

CONNECTORS spade terminals ring terminals

LIGHTING ACCESSORIES BULBS CANDELA CORPORATION

EDMO# 9056903 9056904

MFR#

COLOR

01-0790569-03

green red

MOUNTING DETAILS fwd/AFT POS/ACL fwd/AFT POS/ACL

RELATED PART 7145700

01-0771457-00

28 LED flasher/current source for 90569-series assembly

EDMO#

MFR#

BULB / MOUNT

VOLTAGE

MIDGET FLANGE ML-0327 ML-0330 ML-0387

ML-0327 T-1 3/4 / midget flange ML-0330 T-1 3/4 / midget flange ML-0387 T-1 3/4 / midget flange

28 14 28

C-BAYONET

MAXPULSE LANDING LIGHT CONTROL UNIT

ML-1683

683

single-C / bayonet

28

SEATON ENGINEERING CORP This aircraft landing light pulser can be set to different pulse periods, provides wig wag control, and can be used with standard incandescent, halogen, high intensity LED lamps, and other lighting technologies. Full STC-PMA approval.

MINI BAYONET ML-1495 ML-1813 ML-1819 ML-1820

1495-1 1813-1 1819-I 1820-I

T-4 1/2 / min bayonet T-3 1/4 / min bayonet T-3 1/4 / min bayonet T-3 1/4 / min bayonet

28 14.4 28 28

ML-1495

15

SUB-MINI BULBS CANDELA CORPORATION 9200-000-A

9200-000-B

EDMO#

MFR#

BULB TYPE

VOLTAGE

SUB-MINI weight: dimensions: voltage/current:

1 oz 1.6 × 1.6 in 12-35 VDC, 20 amps total 0-10 amps per circuit – both models

EDMO DISTRIBUTORS

ML-6180 ol1099 ol6839 CF16-I

6180-I OL1099 OL6839 CF16-I / CF16

60 milliamp bulb 60 milliamp bulb 24 milliamp bulb 16 milliamp bulb

1.800.235.3300 | edmo.com

5 12 28 28

ML-6180

315

Aircraft Lighting Lighting Accessories

A490ATSC-SERIES POWER SUPPLY WHELEN ENGINEERING CO, INC.

EDMO# A490ATSC MFR# 01-0770062-03 The model A490ATSC series units are compact power supplies that operate one strobe lighthead. Due to its small size, the A490ATSC can be mounted in the wing tip or the tail, adjacent to the lighthead. This power supply produces an accumulated 34 joules of power and is capable of flashing simultaneously with up to 5 other units by connecting an 18-gauge wire between outlet 3 on the input power connector. Operates from 10 to 30 VDC.

weight: dimensions: power consumption: approvals:

1.7 lb 5 × 3.12 × 3.06 in 4.0 amps @ 14 VDC; 2.0 amps @ 28 VDC FAA/PMA

weight: dimensions: power consumption: flash rate: approvals:

1.1 lb 5 × 1.8 × 4.56 in 20A max (all outputs) @ 28 V 90 fpm (combined) tested in accordance with RTCA/DO-160 environmental tests

FLASHER BOX WHELEN ENGINEERING CO, INC. EDMO# 7170000 MFR# 01-0771700-000 The model 71700 is an electronic light flasher for use with Whelen LED exterior lighting products. This flasher operates two outputs steady on or flashes outputs alternately. This unit is equipped to handle up to 5 amps of power.

REPLACEMENT CONNECTORS A413AHDACF POWER SUPPLY WHELEN ENGINEERING CO, INC.

WHELEN ENGINEERING CO, INC. Replacement cable connector kits and assemblies.

EDMO# HDACF MFR# 01-0770028-05 The HDACF power supply provides simultaneous flashing, alternate flashing, or both for up to three strobe light heads. When operating the wing tip strobes in alternating mode, the unit provides up to an accumulated 42 joules of power to each light and up to 21 joules while in simultaneous mode. On the trigger selector outlet, a switch mounted in place of the jumper allows wing tip outlets 2 and 3 to be turned off while tail outlet 1 remains on (this is useful when the third light is used for ground operations). –– Operates from 10 – 30 VDC

weight: dimensions: current draw:

A444 pin kit

A441 pin kit

A446 socket kit

2.1 lb 2.37 × 5.0 × 5.50 in 7.0 amps @ 14 VDC 3.5 amps @ 28 VDC FAA/PMA

15

approvals:

A442 socket kit

A447 pin kit

71156 SERIES ELECTRONIC PULSE LIGHT FLASHER WHELEN ENGINEERING CO, INC. EDMO# 7115604 MFR# 01-0771156-04 Electronic pulse light flasher for use with Whelen Taxi and Landing LED lightheads. This flasher operates four outputs steady on or will allow two outputs to be flashed or steady independent of the other. –– MS connectors with aluminum housing

316

1.800.235.3300 | edmo.com

EDMO# A441 A442 A444 A446 A447

MFR# 01-0430011-00 01-0410823-00 02-0230007-00 02-0230085-00 01-0417808-00

POS. 3 3 2 2 4

CONNECTOR TYPE male female male female male

INCLUDES pin kit socket kit pin kit socket kit pin kit

EDMO DISTRIBUTORS

Aircraft Lighting Lighting Accessories

INSTALLATION CABLE KIT

A610 FLASH TUBE & A612 LENS SERIES

WHELEN ENGINEERING CO, INC.

WHELEN ENGINEERING CO, INC.

EDMO# HD60 MFR# HD-60 This cable kit includes connectors to hook up the strobe light power supply, warning placards, and an install service manual. The included cable is 16 gauge, 3 conductor, and shielded.

weight: dimensions:

The A610 flash tube and A612 glass lens are used for installing wing tip strobes in single-engine Cessna’s 1972 and later. The existing position light retainer must be modified to accommodate the lens and the flash tube is then mounted directly behind. The A612 lens increases the light intensity by two to three times (in the horizontal plane).

A610

0.050 lb per linear foot 60 ft × 0.275-inch diameter weight:

0.09 lb / 41 grams (A610 flash tube) 0.08 lb / 36 grams (A612 lens) 1.6 × 1.12 × 1.56 in (A610) 1.68 × 1.17 × 1.75 (A612) RF coated clear / aviation red lenses meet material requirements of MIL-C-7989B Class B

dimensions: lenses: approvals:

EDMO# A610

MFR# 02-0250276-00

DESCRIPTION strobe tube assembly with 6-inch leads

ACCESSORIES A612

68-2290005-30

clear glass lens for A610 flash tube

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY.

EDMO is a wholesale distributor of aircraft electronics and accessories, installation and bench supplies, test equipment and tooling, tactical communications products, ground support equipment, and pilot supplies. This extensive product range is complemented by rapid delivery, competitive prices, and personalized service. Give us a call at 1.800.235.3300 or visit edmo.com for more info.

Inverters & Converters

Converters......................................................................................................... 320 Inverters............................................................................................................. 322 Frequency Converters & Current Limiters......................................................... 325 Emergency Power Supplies.............................................................................. 326

EDMO DISTRIBUTORS

1.800.235.3300 | edmo.com

319

Inverters & Converters Converters

CONVERTERS TC120 DC-TO-DC CONVERTER TRUE BLUE POWER

EDMO# 6430120-1 MFR# 6430120-1 The TC120 DC-to-DC Converter produces 120 watts of power from an aircraft’s 28 VDC input and is capable of powering equipment throughout the aircraft including in-seat cabin and cockpit power applications. This unit uses a fanless design that results in a reduction in weight and volume. Due to its small, light design, the TC120 can be conveniently mounted in either the floor or the cabin wall. The TC120 is a direct replacement for Ameri-King converters AK-551-9, AK-551-9M, AK-551-9M1 and AK-551-9M2. The FAA recommends removing Ameri-King products manufactured or shipped after December 28, 2015. –– Supplies 120 watts of power –– Compact, lightweight construction—lighter and smaller than competing units –– Fanless design for reduced weight –– Designed to be mounted in the floor or cabin wall –– Input transient, overload and short-circuit protection –– > 90% efficient –– Optional remote On/Off

weight: dimensions: input voltage: input current: output voltage: output power: regulation: mating connector: case: operating temperature: altitude: certification:

0.6 lb 2.75 × 3.75 × 1.2 in 24-32 VDC 5.0 A Nominal 5-18 VDC 120 watts 1% load, 2% temperature MS3106A-14S-5S blue anodized aluminum extrusion -65°F to +160°F (-55°C to +70°C) 55,000 ft FAA TSO C71 certified RTCA DO-160G qualified

–– –– –– –– ––

Fanless design for reduced weight Designed to be mounted in the floor or cabin wall Input transient, overload and short-circuit protection > 88% efficient Optional remote On/Off

weight: dimensions: input voltage: input current: output voltage: output power: regulation: mating connector: case: operating temperature: altitude: certification:

2 lb 6.74 × 5.94 × 2.02 in 115 ± 10 VAC, 350-800 Hz 2.8 A Nominal 29 VDC ± 3% 280 watts 2% load, 2% temperature MS3106A-18-9S (MCI P/N 9016905-1) anodized aluminum extrusion, blue -65°F to + 160°F (-55°C to +70°C) 55,000 ft FAA TSO C71 pending RTCA DO-160G qualified

LT SERIES REGULATED DC-TO-DC CONVERTER WITH LIGHT DIMMER KGS ELECTRONICS The KGS light dimming power converters control the light intensity of incandescent lighting in aircraft cockpits and cabin environments. These light dimming converter units use pulse width-modulated (PWM) DC-to-DC power conversion topology to provide controlled and regulated DC output power. Output voltage can be adjusted using an external remote control rheostat, poLT-100 tentiometer, or externally controlled voltage reference. All DC power converters provide fully regulated output voltage, overload protection, and current limiting. –– Meets all FAA TSO-C71 for airborne static DC-DC electrical power conversion EDMO#

MFR#

OUTPUT (VDC)

POWER

FEATURES

28 VDC INPUT

TC280 AC-TO-DC CONVERTER

16

TRUE BLUE POWER

320

EDMO# TC280 MFR# 6430280-1 The TC280 is a very efficient ACto-DC converter that produces 280 watts of power from an aircraft’s 115 VAC input. This unit is engineered to run cooler than other similar units and it uses a fanless design that reduces weight and requires less energy. The TC280 is capable of powering electronic equipment throughout the aircraft including in-seat cabin and cockpit power applications. –– Supplies 280 watts of 28-volt power –– Compact, lightweight construction—lighter and smaller than competing units

1.800.235.3300 | edmo.com

LT-52A LT-53 LT-3100 LT-3103-4 LT-45 LT-45D LT-48A LT-48E LT-50 LT-52A LT-53 LT-55B LT-55C LT-100 LT-103

LT-52A LT-53 LT-3100 LT-3103-4 LT-45 LT-45(D) LT-48A LT-48(E) LT-50 LT-52A LT-53 LT-55(B) LT-55(C) LT-100 LT-103

Reg 0 - 5 Reg 0 - 5 Reg 3× 0 - 28 Reg 3× 0 - 5 Reg 0 - 28 Reg 0 - 28 Reg 0 - 5 Reg 0 - 5 Reg 0 - 5 Reg 0 – 5 Reg 0 – 5 Reg 0 – 5 Reg 0 - 5 Reg 0 - 28 Reg 0 - 28

0 - 10 A 0 - 10 A 0 - 9.9 A 0 - 9.9 A 0 - 2.5 A 0 - 3.6 A 0 - 7.5 A 0 - 10 A 0 – 7.5 A 0 – 10 A 0 – 10 A 0 – 10 A 0-15 A 0-3.6 A 0-3.6A

rheostat/voltage control rheostat/voltage control rheostat control rheostat control rheostat control potentiometer control rheostat control potentiometer control potentiometer control rheostat/voltage control rheostat/voltage control rheostat/voltage control rheostat/voltage control rheostat/voltage control rheostat/voltage control

EDMO DISTRIBUTORS

Inverters & Converters

Converters

LT SERIES REGULATED DC-TO-DC CONVERTER KGS ELECTRONICS Light, small, and efficient, KGS DC-to-DC power converters incorporate PWM regulation and control topologies while also using MOSFET and IGBT power switching and surface mount technology (SMT) components. These units are available with variable and fixed 5 VDC, 12 VDC, 14 VDC, or 28 VDC regulated output and all units in this series provide fully regulated output RG28 voltage, overload protection, and current limiting. Standard ratings available from 10 watts to over 800 watts of continuous output power. –– Highly regulated DC boost converter models including RR18, RHB40, and RH70 provide stable DC output voltage over a wide input voltage range (8-28 VDC); these models are capable of maintaining bus DC voltages (20-22 VDC) to critical equipment during engine starts or low voltage transient conditions –– Meet the standards of airborne applications under FAA TSO-C71 regulatory requirements –– Meet the following environmental test parameters: RTCA DO160D/E, MIL-STD-810D and MIL-STD-461E EDMO#

MFR#

OUTPUT (VDC)

POWER

FEATURES

28 VDC INPUT LT-46C LT-71 RG28 RG40 RH70

LT-46(C) LT-71 RG28 RG40 RH70

Reg 12 Reg 14 Reg 14 Reg 14 240

4.2 A 8A 0 – 20 A 0 – 30 A 2.5 A

fixed output voltage fixed output voltage reg. fixed output voltage reg. fixed output voltage reg. fixed output voltage

24

180 W

reg. boost converter

24

400 W

reg. boost converter

10 - 24 VDC INPUT RR18

RR18

8 - 24 VDC INPUT RHB40

N2412-SERIES DC-TO-DC POWER CONVERTER ASTRON CORPORATION

EDMO DISTRIBUTORS

2412-12: 1.8 lb 2412-24: 2 lb 2412-12: 2 × 6.2 × 6 in 2412-24: 2 × 6.2 × 7 in 22 – 32 VDC 2412-12: 0.03 VDC 2412-24: 0.04 VDC 20 mVrms 2412-12: 10 A 2412-24: 20 A 2412-12: 12 A 2412-24: 24 A 16 VDC 88%

dimensions: input voltage: line/load regulation: ripple: continuous current: peak current: overvoltage protection: efficiency:

EDMO# 2412-12 2412-24

MFR# N2412-12 N2412-24

INPUT (VDC) 22 – 32 22 – 32

OUTPUT (VDC) 14 14

POWER (CONTINUOUS VOLTAGE) 10 A 20 A

ST26 TACH GENERATOR ADAPTER SANDIA AEROSPACE

EDMO# 305662-00 MFR# 305662-00 The ST26 Tach Generator Adapter converts turbine engine tach generators; sinusoidal, 26 VAC – 400 Hz output into a digital signal. This adapter is compatible with aircraft instrument displays and other control systems and is approved to work with most common aircraft tachometer models. TSO approved.

weight: dimensions: operating voltage: current: operating temperature: max. operating altitude: approvals:

8 oz 5.06 × 0.99 × 3.35 in 11 - 33 VDC 0.10 Amps part channel -55°C - 70°C 55,000 ft TSO C49B, ETSO C49B, DO 160E

Not finding what you need? EDMO carries a wide range of power regulation products, so if the part you are looking for isn’t listed here, check out our website at edmo.com or give us a call at 1.800.235.3300 for parts and pricing. We’re constantly updating our inventory, so there’s a good chance we’ll have what you need in stock.

1.800.235.3300 | edmo.com

16

The N2412-series DC-to-DC power converters are intended for use with FM transceivers and other applications requiring a 12V power source converter from a 24V battery. These units provide overvoltage, overcurrent, and short circuit protection. 2412-24 –– Input voltage is 24 VDC – GRD only (functional between +22 to +32 VDC – GRD) –– Output voltage is 13.8 VDC regulated from zero to full load within ±30 mV –– The N2412-12 delivers 10 amp continuous 12 amp maximum while the N2412-24 delivers 20 amp continuous and 24 amp maximum –– Provide excellent line/load regulation and low output ripple –– Converters may be turned on and off with the ignition switch by removing the jumper between ON/OFF and VIN (voltage in) and connecting a wire from the ON/OFF lug to the ignition

weight:

321

Inverters & Converters Inverters

INVERTERS

TI1200 SERIES STATIC INVERTER TRUE BLUE POWER

TI250 SERIES STATIC INVERTER TRUE BLUE POWER

TI250

TI254

The TI250 Series inverters are efficient DC to AC static inverters that produce 250 watts of “wall outlet” power from the aircraft’s 28 VDC input. Engineered with a fanless design, the TI250 saves energy, operates cooler and weighs only 2.2 pounds. The TI250 utilizes the same connector and footprint as legacy designs and includes overload, short-circuit, and ground fault protection. –– Supplies 250 watts of power to multiple cabin accessories, such as laptops, tablets, and cell phones –– Compact design –– Lightweight at only 2.2 lb –– 85% - 90% efficient –– Input transient, overload, short-circuit protection up to 150% of rated load without damage –– Ground fault interrupt (GFI) protection –– Remote on/off

The TI1200 Series Inverters supply 1200 watts of power to cabin accessories, galley equipment, and entertainment systems. The units in this series are ideal for emergency medical service, law enforcement, and VIP cabin configurations. TI1200 inverters produce 1200 watts of “wall outlet” power from an aircraft’s 28 VDC input. The TI1200 has the TI1200 same connector and footprint of legacy designs, plus overload and short-circuit protection up to 150% of the rated load. –– 1200 watts of power to multiple cabin accessories, galley equipment and entertainment systems –– Compact design—30% smaller than competing products –– Lightweight at only 7.3 lb –– 88% efficient –– Input transient, overload and short circuit protection—up to 150% of rated load without damage –– Optional remote on/off

weight: dimensions: output power: input voltage: input current: output voltage: output frequency:

weight: dimensions: output power: input voltage: input current: output voltage: output frequency: output waveform: power conversion method: altitude: humidity:

16

temperature: mating connector: case: certification:

output waveform: altitude: humidity: temperature: efficiency: remote control: overload & short-circuit protection: integral tuning: mating connector: case: certification:

EDMO# EDMO# TI250 TI254

322

2.2 lb 6.74 × 5.94 × 2.02 in 250 VA 20 - 36 VDC 10A at 28 VDC input TI250: 115 VAC ±3% TI254: 115 VAC ±3% TI250: 60 Hz ±0.1% TI254: 400 Hz ±0.1% single phase, true sine wave, <3% total harmonic distortion current mode control 55,000 ft Tested to < 95% for 10 days, temperature cycle off 100°F to 150°F -65°F to 160°F (-55°C to 70°C) MS3106A-18-9P (MCI P/N 9016905-1, -2) anodized aluminum extrusion, blue FAA TSO-C73 certified RTCA DO-160G certified

MFR# 6430250-1 6430250-2

OUTPUT VOLTAGE: 115 VAC ±3% 115 VAC ±3%

OUTPUT FREQUENCY:

TI1200 TI1202

MFR# KIT6431200-1 6431200-3

7.3 lb 12 × 6.32 × 3.46 in 1200 VA 20 – 36 VDC 50A at 28 VDC input TI1200: 115 VAC ± 3% TI1202: 230 VAC ± 3% TI1200: 60 Hz ± 0.1% TI1202: 50 Hz ± 0.1% single phase, true sine wave < 3% total harmonic distortion 55,000 ft Tested to greater than 95% for 10 days, temperature cycle of 75° F to 160° F –65° F to +160° F (-55° C to +70° C) 85-90% remote on/off optional input transient, overload and short-circuit protection (up to 150% of rated load without damage) dual, electronically-controlled brushless fans MS3106A24-12S MS3057-16A (cable clamp / backshell) anodized aluminum extrusion, blue FAA TSO-C73 certified RTCA DO-160G qualified

OUTPUT VOLTAGE: 115 VAC ± 3% 230 VAC ± 3%

OUTPUT FREQUENCY: 60 Hz ± 0.1% 50 Hz ± 0.1%

60 Hz ± 0.1% 400 Hz ± 0.1%

1.800.235.3300 | edmo.com

EDMO DISTRIBUTORS

Inverters & Converters

Inverters

TI500 STATIC INVERTER TRUE BLUE POWER

EDMO# TI500 MFR# MD50 The TI500 is a DC-to-AC static inverter that produces 115 volts at 60 Hz for 500 watts of wall outlet power using the aircraft’s 28 VDC input. This unit is lighter and 30% smaller than similar inverters yet it uses the same connector and footprint used by legacy designs. Equipped with overload and short circuit protection up to 150% of the rated load. Perfect for powering cabin accessories. –– Supplies power for various cabin accessories such as laptops, cell phones and iPods –– Input transient, overload and short-circuit protection—up to 150% of rated load without damage –– The compact design is 30% smaller than competing products –– Remote on/off

weight: dimensions: input voltage: input current: output: output waveform: output frequency: efficiency: altitude: humidity: temperature: protection: connector: mating connector: case: certification:

3.9 lb 8.15 × 6.34 × 2.74 in 20-36 VDC 17 to 23A power: 500 VA voltage: 115 VAC Single phase, true sine wave <3% Total Harmonic Distortion 60 Hz ± 1% 85-90% 55,000 ft. tested to greater than 95% for 10 days, temperature cycle of 75°F to 160°F -65°F to +160°F (-55°C to +71°C) Input transient, overload and short circuit protection (up to 150% of rated load without damage) MS3102A-18-9P MS3106A-18-9S (MCI P/N 9016905-1, -2) anodized aluminum, blue FAA TSO-C73 and RTCA DO-160F

TI10 STATIC INVERTER TRUE BLUE POWER

EDMO DISTRIBUTORS

weight: dimensions: input voltage: input current: output voltage:

0.28 lb 1.5 × 2.8 × 3.0 in 11 - 40 VDC 1.7A max @ 11 VDC input, 10 VA load 26 ±1 VAC, 400 Hz ±0.5%, single phase 10 VA pure sine wave, <3% distortion -1,000 to 50,000 lb 0 to 95% @25°C -55°C to 70°C terminal block base mount RTCA DO-160F, Section 21, Category M FAA PMA approved

altitude: humidity: temperature: connector: mounting: RF emissions: certification:

SS / SB SERIES STATIC INVERTERS KGS ELECTRONICS INC The Model SS and SB series static inverters use solid-state circuitry to invert a 28 VDC input into a 115 VAC, 60 Hz or 230 VAC, 50 Hz sine wave output. The units in both of these series can be used to power laptop computers, audio/video entertainment systems, portable media SS100 players, microwave ovens, coffee makers, and medical equipment in airborne applications. –– Crystal controlled oscillator for output frequency stability –– Pulse-width-modulated square to sine wave power conversion scheme –– SS series is certified to FAA TSO-C73 EDMO#

MFR#

OUTPUT (VAC)

POWER

DIMENSIONS

WT.

28 VDC INPUT SS SERIES FREQUENCY: 60 HZ SS40 SS100 SS101 SS120 SS120C* SS200

SS40 SS100 SS101 SS120 SS120(C) SS200

115 115 115 115 115 115

400 VA 1000 VA 1000 VA 1200 VA 1200 VA 2000 VA

8.15 × 6.34 × 2.75 in 12 × 6.34 × 3.4 in 12 × 6.34 × 3.4 in 12 × 6.34 × 3.4 in 12 × 6.34 × 3.4 in 14 × 6.51 × 6.23 in

3.8 lb 7.8 lb 7.8 lb 7.8 lb 7.8 lb 17.7 lb

12 × 6.34 × 3.4 in

7.8 lb

28 VDC INPUT SB SERIES FREQUENCY: 50 HZ SB100

SB100

230

1000 VA

*Identical to SS120 except an in/out connector and remote on-off logic.

16

EDMO# TI10 MFR# MD26-28 The TI10 static inverter from True Blue Power is a DC-to-AC static inverter that provides 26-volt, 400 Hz AC power. Small in size at only 1.5 inches tall, this device provides reliable, stable voltage and frequency in terms of its pure sine wave output, regardless of input fluctuations. Ideal for use with bootstrap synchros, weather radar systems, GAD 42 and GAD. –– Compatible with 14 VDC and 28 VDC aircrafts (11 – 40 VDC input range) –– Pure sine wave output 26 VAC, 400 Hz, 10 VA –– Provides reference and/or power for bootstrap synchros, weather radar systems, GAD 42, GAD 43 and others –– Transient and reverse polarity protected

–– Compact and lightweight –– FAA PMA approved

1.800.235.3300 | edmo.com

323

Inverters & Converters Inverters

SC / SPC SERIES STATIC INVERTERS KGS ELECTRONICS INC

weight: dimensions: output power: input voltage: input current:

SC3

SPC-5

The SC and SPC series 400 Hz static inverters from KGS use advanced, solid-state circuitry to invert a 28 VDC input to a 115 VAC, 400 Hz sine wave output. –– Crystal-controlled PWM driven switch-mode conversion process provides clean AC voltage and output frequency stability –– Provides full, regulated AC voltage, overload protection, and current limiting –– Single and three phase 400 Hz models are available –– Certified to FAA TSO-C73 EDMO#

MFR#

OUTPUT (VAC)

POWER

WT.

FEATURES

30 VA 30 VA 50/30 VA 100/600 VA 250/150 VA 250/150 VA 350/150 VA 350/150 VA 250/150 VA 250/150 VA 750/150 VA

1 lb 1 lb 2.5 lb 5 lb 5.1 lb 5.1 lb 5.3 lb 5.1 lb 5.1 lb 5.1 lb 14.2 lb

F/M, Rem P/L, Rem P/L, F/M, Rem on/off return P/L, F/M, Rem P/L, (U) Rem Rem

28 VDC INPUT SC3 SC3 SC3A SC3(A) SPC-5 SPC-5 SPC-10 SPC1-10 SPC-10D SPC-10(D) SPC-10F SPC-10(F) SPC-10H SPC-10(H) SPC-10HD SPC-10HD SPC-10J SPC-10J SPC-10T SPC-10T SPC-60E SPC-60(E) F/M: fault monitor P/L: phase lock Rem: remote on/off

115 26 115/26 115/26 115/26 115/26 115/26 115 115/26 115/26 115/26

SD35 EL PANEL STATIC INVERTER

16

KGS ELECTRONICS INC

324

EDMO# SD35 MFR# SD35 The SD35 electroluminescent (EL) pulse width modulated DC to AC converter provides regulated 0 to 115 VAC power up to 3.04 amperes for EL panel lighting. The SD35 powers approximately 2000-2600 in2 area of an EL panel. –– Output voltage is varied by a slider voltage 0-5 VDC applied at pin F from a remote control potentiometer 5K Ohm 1/2 watt to ground or directly from a 0-5 VDC source –– Internal trim pot provide to adjust the output voltage ±10% at its full clockwise position of the external pot –– Circuit protection: low input voltage shutdown, soft start, high input voltage shutdown, output over voltage limit, and output short circuit current limit

1.800.235.3300 | edmo.com

output voltage: output current: power: frequency: distortion: temperature: altitude: connector:

5.3 lb 3.45 × 8.25 × 3.45 in 350 AV maximum for EL panel 28 VDC nominal, 24 to 32 VDC 18 VDC to 36.4 VDC (abnormal range) 6.7 amps typ at 350VA EL load at 28V 2.8 amps maximum at no load 0-115 VAC regulated 0-3.04 amps continuous 350 VA maximum for EL panel 400 Hz ± 2% 5% typ at 28 VDC for 350 VA, -0.2pf load -55°C to +71°C 55,000 ft mates with MS3106A18-9S

SEA150 THREE PHASE STATIC INVERTER KGS ELECTRONICS INC

EDMO# SEA150 MFR# SEA150 The SEA150 is a 400 Hz 3 phase static inverter that uses solid state circuitry to invert a 28 VDC input to a 115/200 VAC< 400 Hz, 3 phase sine wave output. This unit can be used to power airborne and ground instruments, compasses, gyros, radar, and navigation equipment. –– Crystal-controlled oscillator for output frequency stability –– Pulse-width modulated square to sine wave power conversion scheme

weight: dimensions: output voltage: power: frequency: phase & wave form: harmonic distortion: power factor: efficiency: response time: regulation: overload capacity: protection circuit:

remote on-off: operating temperature: altitude: environmental: compliance:

15.7 ± 0.3 lb 14 × 6.51 × 6.23 in 115 VAC line to neutral, 200 VAC line to line 1500 VA (500 VA per phase) 400 Hz ± 0.4 Hz three phase, sine wave 2.5% (nominal) +0.8 to -0.8 87% (nominal) 300 uSec (no load to full load) 1% line, 1% load, 2.5% temperature 110% of rated power for 2 hours, 150% of rated power for five minutes the inverter will shut down under the following conditions: input voltage > 37.5 ± 1 VDC input voltage < 18 VDC ± 1.5 VDC internal high ambient temperature short circuit condition (after 2 to 15 Sec)(manual reset) yes -55°C to +71°C (-65°F to +160°F) 55,000 ft DO-160C Env. Cat. F2ZBB[lv]E1XXXXXBXAXXXZXXX FAA TSO-C73

EDMO DISTRIBUTORS

Inverters & Converters

Frequency Converters & Current Limiters MPS28-115 DC TO AC MINI PORTABLE INVERTER DEKLIN TECHNOLOGIES, INC

EDMO# MPS28-115 MFR# MPS28-115 The MPS28-115 Mini Power Supply is a lightweight, compact, and portable inverter/power supply that can supply up to 200 VA peak power for five minutes. –– 150 VA continuous output with 200 VA peak power for five minutes –– Lightweight, compact, and portable –– Provides short circuit and overload protection and easy access to a user replaceable fuse –– 400 VA surge power

weight: dimensions: input voltage: input current: standby input current: output voltage: output frequency: output waveform: output power, continuous: output power, peak: efficiency: battery low alarm: battery low shutdown: thermal protection: overload protection: short circuit protection:

1.08 lb 6.06 × 2.87 × 1.77 in range: 22-30 VDC nominal: 28 VDC 10 A max (at 200VA), 7.5 A nominal 0.20 A 115 VAC 60 Hz modified sine wave 150 VA 200 VA 90% 22 VDC ± 0.5 VDC 21 VDC ± 0.5 VDC 176°F / 80°C yes yes

MPS28-300 DC TO AC MINI PORTABLE INVERTER DEKLIN TECHNOLOGIES, INC

weight: dimensions:

1.76 lb 5.9 × 4.13 × 1.77 in

EDMO DISTRIBUTORS

range: 22 – 30 VDC nominal: 28 VDC 0.4 A 115 VAC 60 Hz modified sine wave 300 VA 500 VA (5 minutes) 90% 22 VDC ± 0.5 VDC 21 VDC ± 0.5 VDC 176°F / 80°C yes yes

standby input current: output voltage: output frequency: output waveform: output power, continuous: output power, peak: efficiency: battery low alarm: battery low shutdown: thermal protection: overload protection: short circuit protection:

FREQUENCY CONVERTERS & CURRENT LIMITERS HS SERIES FREQUENCY CONVERTERS KGS ELECTRONICS INC HS-Series 50/60 Hz AC frequency power converters are efficient, lightweight units that can be used to power laptop computers, media players and other entertainment equipment, microwave ovens, coffee makers, and medical equipment. The HS series units use solid state circuitry to convert a 115/200 VAC, 400 Hz, 3 PH input to 115 VAC, 60 Hz or 230 VAC, 50 Hz sine wave output. These units are equipped with a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sine wave power conversion scheme.

HS120

HS200 weight: dimensions: input voltage: input frequency: output voltage / frequency:

output frequency: output wave form: harmonic distortion: power factor:

HS120: 8.1 lb HS200: 17.5 lb HS120: 12 × 6.34 × 3.4 in HS200: 14 × 6.51 × 6.23 in 115/200 VAC ± 10 VAC 3 PH HS120: 400 Hz ± 100 Hz HS220: 400 Hz ± 200 Hz 115 VAC (108 to 120 VAC) / 60 Hz (± 0.1 Hz) @ 1200 VA 115 VAC (108 to 120 VAC) / 60 Hz (± 0.1 Hz) @ 2000 VA 60 Hz (± 0.1 Hz) sine 0.5% (nominal) +0.8 TO -0.8

1.800.235.3300 | edmo.com

16

EDMO# MPS28-300P MFR# MPS28-300P The MPS28-300 power supply provides 300 VA continuous output in a compact, portable, and lightweight unit. –– 300 VA continuous output –– Lightweight, compact, and portable –– 400 VA peak power for 5 min –– Provides short circuit and overload protection and easy access to a user replaceable fuse –– 400 VA surge power

input voltage:

325

Inverters & Converters Emergency Power Supplies

output phase: efficiency: response time: line/load regulation: overload capacity:

single 87% (nominal) 300 uSec (no load to full load) 1% line, 1% load, 2.5% temperature 110% of rated power for 2 hrs, 150% of rated power for 5 minutes the inverter will shut down under the following conditions: input voltage > 137 ± 5 VAC input voltage < 80 VAC ± 20 VAC internal high ambient temperature short circuit condition (after 2 to 15 Sec)(manual reset) yes -55°C to +71°C (-65°F to +160°F) 55,000 ft RTCA DO-160C Env. Cat. F3ZBB [LV] E1XXXXXBXAXXXBXXX

protection circuit:

remote on/off: operating temperature: altitude: environmental:

EDMO# HS120 HS200

MFR# HS120 HS200

INPUT

115 VAC 60 Hz @ 1200 VA 115 VAC 60 Hz @ 2000 VA

TS835 EMERGENCY POWER SUPPLY TRUE BLUE POWER

16

protection: mating connector: rack mount: life expectancy: case: battery: certification:

4.8 lb 3.1 × 12.7 × 2.4 in 4.5 amp-hour battery nominal 24 – 32 VDC, 15 amps max. 24.5 VDC nominal, 20 amps max TS835-5 includes 3.0 – 5.5 VDC adjustable lighting output, 5.0 amps max factory replaceable fuse DPXB13-33S-0001 ¼ ATR rack 10 years anodized blue aluminum lithium-ion FAA TSO C179a certified EASA ETSO C179a certified ANAC TSO C179a certified Part 23 AML STC certified RTCA/DO-160F qualified RTCA/DO-311 qualified

OUTPUT

115/200 3PH 400 Hz 115/200 3PH 400 Hz

EMERGENCY POWER SUPPLIES

326

weight: dimensions: capacity: input: output:

The TS835 Series Lithium Emergency Power Supply uses Nanophosphate® lithium-ion cell chemistry. This design provides advantages over older, lead-acid designs including a 63% reduction in weight, lower maintenance costs, and a longer usable life of up to 10 years. This unit automatically provides 24.5 VDC power for critical or standby equipment in the event of aircraft power failure and is equipped with an integrated 5 V output. –– Automatically provides 24.5 VDC power for critical or standby equipment in the event of aircraft power failure –– Equipped with a 4.5 amp-hour Nanophosphate® lithium-ion battery –– Includes an integrated 3.0-5.5 VDC adjustable output –– Uses A123 Systems’ advanced Nanophosphate® lithium-ion technology that is safer and more chemically stable than older metal oxide lithium-ion chemistries –– Maintains full charge by recharging during normal flight operations –– 63% lighter than legacy lead-acid designs –– Direct replacement for L-3 Avionics/JET PS-835 or PS-855 (same rack mount and connector) –– Two-year maintenance schedule –– 10-year life expectancy

1.800.235.3300 | edmo.com

EDMO# TS835 TS835-5

MFR#

OUTPUT

MD835-1 24.5 VDC nominal, 20 amps max TS835-5 same as TS835 with 3.0-5.5 VDC adjustable lighting output, 5.0 amps max

TS420 EMERGENCY POWER SUPPLY TRUE BLUE POWER

EDMO# TS420 MFR# MD420 The TS420 Series Emergency Power Supply System is a two-module system consisting of a remote-mounted battery module and panel-mounted annunciation control unit. This system provides 18 volts of rechargeable power for lighting or critical avionics in the event of a power failure. The TS420 automatically charges during flight, turns off after flight, and switches on in the event of power failure while in-flight conditions are detected. When in use, this system provides power to one primary power output and three lighting power outputs. The TS420 system can be operated manually but also provides an automatic function that uses either air speed data collected from its integrated pitot/static ports or electrical signals from an external sensor to verify in-flight conditions. –– Provides 18 volts of rechargeable power for lighting and avionics –– Capable of providing power for LED or incandescent lighting at 5, 14, or 28 VDC –– This unit commences charging during flight, activates immediately in the event of power loss, and turns off after flight –– Remote, mini-annunciation switch controls test and manual operations –– Annunciator lighting provided by LED backlighting with automatic internal dimming –– Field-replaceable battery modules –– Uses sealed lead-acid cells for improved reliability –– Includes Mil-Spec connectors

EDMO DISTRIBUTORS

Inverters & Converters

Emergency Power Supplies

weight: dimensions: capacity: input power: output power: mating connectors: compatibility:

certification:

3.2 lb 3.35 × 6.75 × 3.38 in 1.0 Ah (0.05C) at 25°C 10 – 32 VDC, 0.25A nominal, 4.0A max at 14 VDC/2.0 max at 28 VDC 18 VDC nominal, 1.6 amps max 25-pin female D-sub (MD25F20JVL0 or equivalent) 9-pin female D-Sub (MD9F20JVL0) or equivalent) provides 60 minutes or more of backup power to Mid-Continents electric attitude indicator model 4200 or 4300 and lighting power for two additional instruments (5, 14, 0r 28 V) battery run time will vary depending on total power load and battery charge status FAA TSO-C4c certified RTCA DO-160E qualified

TT43 BATTERY TESTER AND CHARGER FOR TS420

EDMO# TT43 MFR# TT43 The TT43 battery tester and charger provides automatic capacity testing and battery recharging for the 4300 Series Lifesaver and TS420 Series emergency power supply batteries in five hours or less. It can test and charge two batteries at once and it allows for indefinite float charging (providing a continual low rate charge that compensates for the self-discharge rate of the battery) so that a charged battery is always ready. The TT43 is equipped with a dot matrix LCD display and microprocessor control. –– Tests and charges the removable battery of the 4300 Series and TS420 Series Emergency Power Supply –– Alphanumeric dot matrix LCD display provides dynamic test status and measurements –– Test or charge on or two batteries simultaneously in less than 5 hours –– Microprocessor control adjusts test to accurately compensate for acceptable battery variation –– Bright LEDs provide quick reference pass/fail results –– Can float charge batteries indefinitely to maintain an always-ready state

supports: efficiency: accuracy:

display: indication: power supply: battery type: protection:

EDMO DISTRIBUTORS

EDMO carries a wide range of products, including custom options, so if you’re not finding what you need, give us a call at 1.800.235.3300 or visit edmo.com. We’re constantly updating our inventory so there’s a good chance we will have what you’re looking for.

16

battery conditioning:

4300 Series: 0.5 Ah battery TS420: 0.5 Ah battery TS420-1: 2.5 Ah battery tests/chargers up to two batteries simultaneously in < 5 hours microprocessor control adjusts test to accurately compensate for acceptable battery variation can float charge batteries indefinitely to maintain an always-ready state alphanumeric dot matrix LCD display bright LEDs provide quick reference pass/fail results wall-outlet AC adapter included switch allows for selection of 0.5 Ah or 2.5 Ah battery short-circuit protection and time out for failed batteries

WITH OVER 40 YEARS OF EXPERIENCE IN THE INDUSTRY, EDMO KNOWS QUALITY.

1.800.235.3300 | edmo.com

327

Cobham Aerospace Communications

Airborne Tactical Radio Solutions

RT-7000 Panel-mount Tactical Radio • Tactile & touchscreen interface • 29.7-960 MHz AM/FM, P-25 • Trunking: P-25 Phase 1 & 2, SmartZone, SmartNet • Connectivity for 2 external handheld radios • Up to 3 embedded internal transceivers • NVIS compliant - MIL STD 3009 • Embedded, relay, simulcast, and relay/simulcast • User control functions and operations supported within 3 menu selections

C-5000 Control Head / RT-5000 P-25 Multi-band Transceiver • Used with P-25 RT-5000s • Controls up to two transceivers • 700 preset channels • Programmable by PC database download, front panel, or manual frequency entry • Max interoperability: AM/FM, 29.7-960 MHz • P-25: all State, Federal, Local voice bands • Relay, simulcast, repeater capabilities • 10 watts power across all bands • Tunability: 1.25 kHz steps

NPX136D Digital P-25 Transceiver • Conventional FM and P-25 digital • Wideband/narrowband operation • 2-channel synthesized guard • USFS approved/GSA listed • Multiple scan modes • Front panel programmable

NPX138N Panel-mount FM Transceiver

AW139 Image © 2015, Simplex Aerospace

• Wideband-/narrowband-capable • 138-174 MHz operating frequency • Optional 2-channel synthesized guard • Compact size and weight • Multiple scan modes • 100-channel memory • Optional NVG-compatible lighting

About Cobham Aerospace Communications Cobham Aerospace Communications is a global supplier of avionics solutions for Special Mission, Military, and Civil aircraft platforms.

© 2016 Cobham, plc. All rights reserved. Information supplied by Cobham Aerospace Communications is believed to be accurate and reliable. Cobham Aerospace Communications assumes no responsibility for any errors in this publication. Cobham Aerospace Communications reserves the right, without notice, to make changes in product design or specifications.

Cobham Aerospace Communications 6400 Wilkinson Drive Prescott, AZ 86301 USA T: +1 (928) 708-1550 F: +1 (928) 541-7627 E: [email protected]

www.cobham.com/prescott

Tactical Communications & Audio Systems

Audio Controllers............................................................................................... 330 Digital Audio Control System (DACS)................................................................ 335 Audio Mixer Panels........................................................................................... 337 PA/Siren Systems.............................................................................................. 337 Audio Storage And Playback Unit..............................