[PDF]DR-IO0606 - Rackcdn.comhttps://3e7777c294b9bcaa5486-bc95634e606bab3d0a267a5a7901c44d.ssl.cf2.rackc...
2 downloads
212 Views
977KB Size
DIRECT SERIES LIGHTING CONTROL MODULE
FEATURES
STRUCTURE
• •
6 dry contact closure inputs and 6 TTL level digital outputs.
• •
Output configurable to high or low state.
• • • • • •
1 B
5V or 12V selectable output voltage to power of a variety of LED faceplates.
6 CHANNEL I/O MODULE
Input uses opto-isolator circuit and is protected from high voltage and overcurrent.
24V LINK
12V/5V
24V
GND
GND DR-IO0606
6-CH IO MODULE
COM
COM
Compact design for installation in a Type 86 box.
IN1
OUT1
For use with mechanical keypad and sensor trigger switch.
IN2
OUT2
IN3
OUT3
IN4
OUT4
IN5
OUT5
IN6
OUT6
COM
COM
2
LEDs indicate port status. 5V, 12V or 24V voltage available for different types of sensors. Online upgrading. Communication through DR-Link interface.
ID SET
Power supply
DC12-24V 15mA
Output voltage
5V or 12V
Installation
Concealed installation
Control interface
1 x DR-Link
Operation temperature / RH
0˚C - 45˚C / 20% - 93% RH
Storage temperature / RH
-40˚C - +55˚C / 10% - 93% RH
Dimensions (L x W x H)
60 mm × 30 mm × 14 mm
Weight
40 g/pcs
1
1.
DIMENSIONS 30
DR-IO0606 I/O Module provides 6 dry contact closure inputs and 6 TTL level digital outputs and is designed for Type 86 box installation. DR-IO0606 can use with a 6-key reset or self-locking faceplate.
G
POWER
SPECIFICATIONS
DR-IO0606
A
B
A
G
12 24V
POWER
LINK
12V/5V
24V
GND
GND DR-IO0606
6-CH IO MODULE
50
COM
COM
IN1
OUT1
IN2
OUT2
IN3
OUT3
IN4
OUT4
IN5
OUT5
IN6
OUT6
COM
COM
ID SET
1
2
3
4
LOAD
5
12V
6 NOMAL 5V
measured in mm
2
3
4
4
LOAD
5
3
12V
6 NOMAL 5V
5 6
Control Interface and LED Indicators: •
Control Interface: B, A, G, 24V.
•
POWER: indicates status of power supply.
•
LINK: indicates the connection status. When solid on, the control interface is correctly connected; When blinking, a fault appears to the control interface connection.
2.
Input: COM, IN1, IN2, IN3, IN4, IN5, IN6, COM.
3.
Output: COM, OUT1, OUT2, OUT3, OUT4, OUT5, OUT6, COM.
4.
ID SET Switch (1-6): for address assignment (01-63). ID value: 20, 21, 22, 23, 24, 25 (from switch 1 to 6).
5.
LOAD / NORMAL Swtich: for program downloading.
6.
12V / 5V Swtich: for output power selection.
WIRING OF SINGLE MODULE
READE BEFORE USE To a control module
To a control module
1 2V / 5V GND IN1-IN6
B
A
G
24V
POWER
COM Body Sensor
LINK
12V/5V
24V
GND
GND
•
Read this document carefully before use.
•
Ensure the product is well ventilated.
•
Avoid moisture, vibration and dust.
•
Do not expose the product to rain, any types of liquid or corrosive gases.
•
Dry the product immediately if it’s affected by damp or splash.
•
Refer all servicing to qualified service personnel or AMX if a product fault appears.
DR-IO0606 6-CH IO MODULE
COM
COM
IN1
OUT1
IN2
OUT2
IN3
OUT3
IN4
OUT4
IN5
OUT5
IN6
OUT6
COM
COM
ID SET
1
2
3
4
LOAD
5
+ LED Output 1-3
LED Output 4-6
+ CONTACT
12V
6 NOMAL 5V Output power selection
Address assignment
Program downloading
© 2017 Harman. All rights reserved. ENZO, NetLinx, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time. The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
DR-IO0606 062017