ec type-examination certificate

---

Page 1 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC68501

Issue 1

30 January 2015

Certified since 30 January 2015 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

It is certified that the manufacturer’s technical file and the PPE detailed below have been assessed and found to be in accordance with EC Directive 89/686/EEC for PPE of ‘Intermediate Design’. PPE Product: HexArmor® Chrome series® 4080 Glove. – comprised of a white goatskin leather outer shell with an inner palm lining of HA607P (53% Cotton 47% Plastic) fabric, with thermoplastic rubber moulds on the back of hand, with a leather /Velcro closure on the cuff. The gloves are available in six sizes (7 to 12). When examined the PPE satisfied the relevant requirements in the harmonized standards, EN 388:2003 Performance Level 4, 5, 1, 3. The manufacturer’s information notices detailed within technical file (4080) in English have been assessed and found to have addressed all of the relevant requirements of the standards. However the detailed content of the notice is the responsibility of the manufacturer as are translations into other languages.

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019

Page 2 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC68501

Issue 1

30 January 2015

Certified since 30 January 2015 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

ALL TEST DOCUMENTS MUST BE INCLUDED IN THE TECHNICAL FILE Requirement

Assessment

Technical Documentation

Technical File

Technical file in order with PPE Directive (89/686/EEC) Glove meets all requirements

Technical file Ref 4080 dated 9th January 2015

Glove meets all requirements Dexterity Level 5 EN 388 Level 4,5,1,3

WYMTS 67567

Marking meets the requirements of EN 388:2003, EN420:2003 A1:2009

Detailed in Technical file.

EN 420 innocuousness EN 420 Ergonomics and sizing EN 388 Product Markings

WYMTS 67567

WYMTS 67567-01 Polyco MK14241

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019

Page 3 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC68501

Issue 1

30 January 2015

Certified since 30 January 2015 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

Photograph of Glove

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019