ec type-examination certificate

---

Page 1 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC61948

Issue 1

26 September 2013

Certified since 26 September 2013 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

It is certified that the manufacturer’s technical file and the PPE detailed below have been assessed and found to be in accordance with EC Directive 89/686/EEC for PPE of ‘Intermediate Design’. PPE Product: HexArmor® Hex1TM 2121 Gloves, comprised of a palm material of 60% nylon, 40% polyurethane,. The glove back is 97% Nylon and 3% Elastane (Spandex). The forchettes and palm side of cuff are synthetic leather, 82% Nylon, 18% Elastane (Spandex). The back of the thumb is a 65% polyester, 35% cotton terry fabric. The gloves are available in sizes 7, 8, 9, 10, & 11

When examined the PPE satisfied the relevant requirements in the harmonized standards, EN 388 : 2003 Level 3,1,3,1 The manufacturer’s information notices detailed within technical file 2121 in English have been assessed and found to have addressed all of the relevant requirements of the standards. However the detailed content of the notice is the responsibility of the manufacturer as are translations into other languages.

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.

Page 2 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC61948

Issue 1

26 September 2013

Certified since 26 September 2013 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

ALL TEST DOCUMENTS MUST BE INCLUDED IN THE TECHNICAL FILE Requirement

Assessment

Technical Documentation

Technical File

Technical file in order with PPE Directive (89/686/EEC) Glove meets all requirements

2121 dated 4th September 2013

Dexterity Level 4 Sizes 7 to 11

BM Polyco MK13236

Level: 3 Abrasion 1 Blade cut 3 Tear resistance 1 Puncture resistance Marking meets the requirements of EN 388:2003 & EN 420:2003 A1:2009

BM Polyco MK13240

EN 420 Innocuousness EN 420 Ergonomics and sizing EN 388

Product Markings

BM Polyco MK13236

Detailed in Technical file

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.

Page 3 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC61948

Issue 1

26 September 2013

Certified since 26 September 2013 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

Photograph of Gloves

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.