ec type-examination certificate

---

Page 1 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC65077

Issue 1

13 May 2014

Certified since 13 May 2014 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

It is certified that the manufacturer’s technical file and the PPE detailed below have been assessed and found to be in accordance with EC Directive 89/686/EEC for PPE of ‘Intermediate Design’. PPE Product: HexArmor® GGT5® 4010 Glove, constructed with a PVC coated (71% PVC, 19%Polyester 10% Cotton) full palm outer material, ‘HA603R Superfabric’ (43% polyester 57% plastic) mid layer palm fabric, 100% cotton inner liner, Spandex back of hand, with thermoplastic rubber back of hand molds, synthetic leather (70% Nylon 30% Polyurethane) forchettes with a neoprene cuff with lycra binding. The gloves are available in 5 sizes: 7 to 11.

When examined the PPE satisfied the relevant requirements in the harmonized standards, EN 388:2003 Performance levels 4, 5, 4, 3 The manufacturer’s information notices detailed within technical file (4010) in English have been assessed and found to have addressed all of the relevant requirements of the standards. However the detailed content of the notice is the responsibility of the manufacturer as are translations into other languages.

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.

Page 2 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC65077

Issue 1

13 May 2014

Certified since 13 May 2014 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

ALL TEST DOCUMENTS MUST BE INCLUDED IN THE TECHNICAL FILE Requirement

Assessment

Technical Documentation

Technical File

Technical file in order with PPE Directive (89/686/EEC) Dexterity level 1

4010 dated April 30, 2014

Class 4, 5, 4, 3

BM Polyco MK 14087

Marking meets the requirements of EN 388, EN420

Detailed in Technical file

EN 420 Innocuousness & Sizing EN 388 (ISO 13997) Product Markings

BM Polyco MK 14087

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.

Page 3 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Head of Laboratory: G. Briggs C. Text ATI

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC65077

Issue 1

13 May 2014

Certified since 13 May 2014 Issued to:

Performance fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

Photograph of Gloves

Authorised by: G Briggs Head of Laboratory  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.

2019

 This certificate is only valid if the seal is stamped.