ec type-examination certificate

---

Page 1 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC67449

Issue 1

31 October 2014

Certified since 31 October 2014 Issued to:

Performance Fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

It is certified that the manufacturer’s technical file and the PPE detailed below have been assessed and found to be in accordance with EC Directive 89/686/EEC for PPE of ‘Intermediate Design’. PPE Product: HexArmor® ThornArmorTM 3092 Glove, the glove is comprised with an outer palm material of 81% PVC, 19% Polyester over three layers of HA110 Super fabric (37% Polyester , 63% Plastic) with a spandex lining. The glove has the back of the havnd constructed with a 4-way spandex and a nylon mesh, forchettes are synthetic leather(60% Nylon, 40% Polyeurethane, and the cuff is neoprene with a lycr binding and TPR Velcro Closure. The gloves are available in sizes: 5 to 11.

When examined the PPE satisfied the relevant requirements in the harmonized standards, EN 388:2003 Performance levels 4, 5, 2, 3 The manufacturer’s information notices detailed within technical file (3092) in English have been assessed and found to have addressed all of the relevant requirements of the standards. However the detailed content of the notice is the responsibility of the manufacturer as are translations into other languages.

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019

Page 2 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC67449

Issue 1

31 October 2014

Certified since 31 October 2014 Issued to:

Performance Fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

ALL TEST DOCUMENTS MUST BE INCLUDED IN THE TECHNICAL FILE Requirement

Assessment

Technical Documentation

Technical File

Technical file in order with PPE Directive (89/686/EEC) Dexterity level 5

3092 dated October 28th 2014

Class 4,5,2,3

Polyco MK 14211 Polyco MK 14215 WYMTS 66594 WYMTS 66995

Marking meets the requirements of EN 388, EN420

Detailed in Technical file

EN 420 Innocuousness & Sizing EN 388

Product Markings

WYMTS 66594-01

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019

Page 3 of 3

West Yorkshire Materials Testing Service PO Box 5, Nepshaw Lane South, Morley, Leeds LS27 0QP Tel: 0113 253 0241 Fax: 0113 252 7029 Materials Testing Manager: D. Brockbank

EC TYPE-EXAMINATION CERTIFICATE (EC Directive 89/686/EEC) Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC

Certificate No:

EC67449

Issue 1

31 October 2014

Certified since 31 October 2014 Issued to:

Performance Fabrics, Inc. , T/A HexArmor 2000 Oak Industrial Dr. NE Grand Rapids MI 49505 USA

Photograph of Glove

Authorised by: D. Brockbank Materials Testing Manager  This Certificate remains the property of West Yorkshire Materials Testing Service whom it must be returned to on request.  This certificate is only valid if the seal is stamped.

2019