ETHOS 5010 SPECIFICATION General Specification Display Range control Polarity Zero adjustment Over range indication Low battery indication Safety standards Operating environment Storage environment Fuse Test lead probe Power supply Dimension Weight
VERSION 1 08/17
LCD with a max. reading of 1999 Manual range control Automatic negative polarity indication Automatic The “1” or “-1” display Display “
“ sign
– CATIII 300V~. – EMC/LVD. CATII500V~. The meter is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Overvoltage Category II. Temperature 0°C to 40°C (32 to104°F), Humidity ≤ 80% RH. Temperature -20°C to 60°C (-4 to140°F), Humidity ≤ 90% RH. F0.5A/500V 5 x 20mm, F10A/500V 5 x 20mm CATII 500V / CATII 300V, 10A, L=90cm. 3V CR2032 battery 125(H) x 74(W) x 30(D) mm Approx. 100g (including battery)
Distributed by MTi Email:
[email protected] Web: www.ethos-instruments.co.uk
Electrical Specification Accuracies are ± (% of reading + number in last digit) at 23 ± 5°C ,≤75% RH.
2.2.1 DC Voltage Range 200mV 2000mV 20V 200V 500V
Accuracy ± (1.0%+2)
± (1.2%+2)
Resolution 0.1mV 1mV 10mV 100mV 1V
Overload protection: 600V DC or AC rms Impedance: 10MΩ, More than 100MΩ on 60mV/600mV range
2.2.2 AC Voltage Range 200V 500V
Accuracy ± (1.5%+3)
Resolution 100mV 1V
Average sensing, calibrated to rms of sine wave Frequency: 40~500Hz Overload protection: 500V DC or AC rms Impedance: 450kΩ
2.2.3 DC Current Range 200μA 2000μA 20mA 200mA 10A
Accuracy ± (1.5%+2)
± (2.0%+2) ± (2.0%+3)
Resolution 0.1μA 1μA 10μA 100μA 10mA
Overload protection: F0.5A/500V, F10A/500V fuse Note: 10A up to 10 seconds
VERSION 1 08/17
Distributed by MTi Email:
[email protected] Web: www.ethos-instruments.co.uk
2.2.4 Resistance Range 200Ω 2000Ω 20kΩ 200kΩ 2000kΩ
Accuracy ± (1.0%+5)
± (1.0%+3) ± (1.5%+3)
Resolution 0.1Ω 1Ω 10Ω 100Ω 1kΩ
Overload protection: F0.5A/500V fuse
2.2.5 Diode and Audible continuity test Range
Description Display read approximately forward voltage of diode Built-in buzzer sounds if resistance is less than 50Ω
Test condition Forward DC current approx. 10μA Reversed DC voltage approx. 1.8V
Open circuit voltage approx. 1.8V
Overload protection: F0.5A/500V fuse
VERSION 1 08/17
Distributed by MTi Email:
[email protected] Web: www.ethos-instruments.co.uk
