Fastlane Pool Winterization Advisory

---

Fastlane Pool Winterization Advisory Page 1 of 1

If the Fastlane Pool is to be taken apart: 1) 2) 3) 4) 5)

Turn off the power at the circuit breaker Disconnect and remove the Fastlane Unit from the pool Disassemble the Fastlane Pool Drain/blow out the water lines and the filtration equipment Store the pool and equipment

If the Fastlane Pool is to be left together (i.e. the pool has a security cover): 1) Remove the skimmer (if the pool is equipped with a skim filter, remove the skimmer and housing, but leave the L-brackets attached to the rails) 2) Plug the suction and the return fitting using the 1-1/2” PVC plugs with o-rings originally sent with the pool (replacements are available through Endless Pools Customer Service) 3) Disconnect the PVC unions in the plumbing lines and drain/blow out these lines 4) Take the equipment inside, or otherwise drain/protect the equipment (an air conditioning cover would work well) 5) Add a winterizing kit (available from a local pool store) to the pool water 6) To cover the pool: Option A: Leave the Retractable Security Cover open and purchase a winter cover from a local pool store. Place a cover pump on top of the winter cover along with water bags/weights. Option B: 1) Float air pillows or inner tubes over the entire surface of the water and tie off as necessary 2) Close the Retractable Security Cover. Place a cover pump on top of the cover to remove any water that may accumulate 3) Monitor the amount of snow/water on top of the cover during the winter. Remove excessive snow and/or move the cover pump as necessary

Endless Pools Inc.

1/20/2010