Fender Lip Roller Tool

---

Fender Lip Roller Tool 024962SCH01A

Maintain a factory-fresh look while increasing fender clearance The Schwaben Fender Lip Roller Tool is a universal tool which allows you to gently and gradually roll your inner fender lips in order to increase fender to tire clearance. This is a perfect solution for anyone wanting to lower their vehicle, modify offset or install wider wheels without experiencing clearance issues. This tool features a hub flange that mounts to your wheel hub and is secured by your stock lug nuts. The hub flange is designed to accommodate all popular four and five lug bolt patterns.

This tool is designed to be used with a heat gun to soften the paint to prevent paint cracking.

Let’s take a moment to study the diagram below to become familiar with the component names and locations, this will make using this tool a breeze! Hub flange

Pivot pin

Handwheel Pressure bar

Fender roller wheel

Adjustment lever

Instructions for use: Step #1

• •

Raise and properly support the car, then remove the wheel from the hub. Use the lug nuts and the included beveled washers to firmly mount the tool to the hub. (Fig 1)

Step #2

•

Use the handwheel and adjustment lever to align the fender roller wheel with the fender lip you wish to form. Carefully use a heat gun to slowly warm the paint to approx 120F, just enough to allow it to soften and prevent cracking during the rolling process. Adjust the pressure bar to gently apply pressure to the fender lip, rolling it inward. (Fig 2)

• • Step #3

• • •

Fig 1

Firmly grasp the tool and repeatedly rotate in an arcing motion across the fender lip to bend it inward. (Fig 3) Tighten the pressure bar a quarter turn every few passes to gently roll the lip until satisfied. Some fender arches may have varying radii, depending on the design of the wheel arch, it may be necessary to form the lip in small sections at a time, readjusting as you go.

Fig 2

Fender lip

Fig 3