foldable recipe holder

---

PLANS BY CHERISHED BLISS

FOLDABLE RECIPE HOLDER

D I F F I C U LT Y L E V E L : E A S Y

TOOLS REQUIRED

18V ONE+™ AIRSTRIKE™ 18GA BRAD NAILER 10 IN. PORTABLE TABLE SAW WITH QUICKSTAND VARIABLE SPEED DRILL 2 PEAK HP PLUNGE ROUTER

ADDITIONAL REQUIRED ITEMS TAPE MEASURE PENCIL SAFETY GLASSES HEARING PROTECTION

PURCHASE LIST: 1/2" HINGES BRAID NAILS WOOD GLUE 1/2" MDF BOARD 1/4" MDF BOARD

PLANS BY CHERISHED BLISS

PAG E :   2

ASSEMBLY:



1

2



Cut pieces according to sizes on picture.

Using a router, cut dados in the board according to the measurements.

PLANS BY CHERISHED BLISS

PAG E :   3



3

Cut a 45 degree angle on (1) of the 6" boards. Making sure the longest side measures 6".

4

Lay the 3 pieces end to end. The right 6" piece should have the longest side facing up, the same as the dados. (as pictured)



PLANS BY CHERISHED BLISS

PAG E :   4



4

Lay the 3 pieces end to end. The right 6" piece should have the longest side facing up, the same as the dados. (as pictured)

5

Attach the boards using the hinges, making sure to center the hinge on the seams.



PLANS BY CHERISHED BLISS

PAG E :   5

6

Build the part that will hold the recipe book/tablet. This should be 9” wide.

7

Attach to the recipe stand with wood glue and brad nails from the back of the 12” board.





PLANS BY CHERISHED BLISS

PAG E :   6