Gripple Lockable The Gripple Lockable is for use in dynamic or extreme load applications. Fundamentally a Gripple tensioner with added security of locking screws engaging on the gripping mechanism. ADVANTAGES • Fast Installation even on large diameters by means of the push-fit mechanism • A range of products to suit wire rope / cables from diameter 2.00 to 10.00 mm • Secondary locking mechanism for peace-of-mind • Available as a unit or ready-to-use anchor kits complete with cable
INSTALLATION
1) Using the pre-ferruled loop, hook the wire rope around the top of the anchor post. 2) Slide the wire rope through one of the two Gripple tensioner channels (marked with an arrow). 3) Pass the wire rope through the anchor point. 4) Push the wire rope back into the second channel of the Gripple tensioner. 5) Tension with the Tensioning Tool.
SPECIFICATION Product
Lockable on... (Metric ø)
Lockable on... (Imperial ø)
Lockable No.2
5/64”
2.00 mm
Lockable No.3
1/8”
3.00 mm
Lockable No.4
5/32”
4.00 mm
Lockable No.5
3/16”
5.00 mm
Lockable No.6
1/4”
6.00 mm
Lockable No.8
5/16”
8.00 mm
Lockable No.10
3/8”
10.00 mm
Gripple Ltd | The Old West Gun Works | Savile Street East | Sheffield S4 7UQ Tel 0800 018 4264 Fax 0114 275 1155 email
[email protected] PI-10-ENG-AG
www.gripple.com
