KN462 DriTherm tear-Off Pad-RFQ-V15.indd


[PDF]KN462 DriTherm tear-Off Pad-RFQ-V15.indd - Rackcdn.comhttps://2ecffd01e1ab3e9383f0-07db7b9624bbdf022e3b5395236d5cf8.ssl.cf4.rackcd...

0 downloads 114 Views 542KB Size

DriTherm : Brick Cavity Wall Insulation ®

Repels summer heat. Retains winter warmth.

Summer During the hot summer months, DriTherm Cavity slab will help to keep the inside of the house cool by restricting heat radiating in to the home from the outside brickwork.

Winter During the cool winter months, DriTherm Cavity slab will help to keep the inside of the house warm by reducing heat transfer from inside the home to the outside.

N

TU

RAL

NO ADDED FORMALDEHYDE B

R

N

T

WARR A

30054

A

Y

NT

ISTURE

L

O

SISTAN RE

Y* • M

With DriTherm Cavity slab installed in the cavity, the external wall will not lose heat energy in the winter months or absorb heat energy in the summer months, in turn reducing demand on your energy use to maintain a constant and comfortable internal temperature.

O

W

DriTherm : Brick Cavity Wall Insulation ®

Repels summer heat. Retains winter warmth. DriTherm Cavity slab is made using recycled glass and with ECOSE® Technology, a revolutionary binder that contains no added formaldehyde, phenols or acrylics and provides a tried and tested solution for masonry walls.

Fire Performance

Full fill

DriTherm Cavity Slab is non-combustible and classified as Euroclass A1 to BS EN ISO 13501-1 – the highest possible.

Fully fills the cavity to ensure high thermal performance. Product is also flexible to fit around wall imperfections.

Thermal Performance

Water Resistant DriTherm Cavity Slab contains a water repellent additive to ensure that no liquid water is able to pass through the product and reach the inner leaf of masonry.

High thermal performance with a material  R-Value of 1.4 m2K/W.

Sustainability

BCA Compliant

N

* TY • M

UR IST E R

ISTAN T ES

O

DriTherm

DriTherm Cavity Slabs are manufactured with ECOSE® Technology which reduces embodied energy and delivers superior environmental sustainability compared to traditional glasswool products.

DriTherm Cavity Slab is CodeMark certified, demonstrating that it meets the Building Code of Australia (BCA) requirements for the installation of insulation in a masonry brick cavity. Legislation requires building control authorities to accept CodeMark certified products and therefore gives contractors and specifiers absolute confidence in the products use.

Fineline

Thickness (mm)

R-Value (m 2K/W)

Length (mm)

Width (mm)

Area per pack (m2)

0811072

50

1.4

1100

600

5.3

WARR A KIAU0314056DL

50 Year Warranty DriTherm Cavity Slab is guaranteed for 50 years to resist the passage of water from the outer to the inner leaf.

For more information visit www.knaufinsulation.com.au