MECHANICAL FAUCETS 802-VE64XKABCP

---

MECHANICAL FAUCETS 802-VE64XKABCP Manual Faucets Product Type ___________________________________________________ Deck Mounted 4" Fixed Centers Hot and Cold Water Sink Faucet Job Name ________________________________________________

Features & Specifications ___________________________________________________ • 4" Fixed Centers • 1.0 GPM (3.8 L/min) Vandal Proof Non-Aerating Laminar Outlet • 2-3/8" Vandal Proof Lever • Ceramic • 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2" Flexible Riser • 4" Center to Center Integral Cast Brass Spout • ECAST® design provides durable construction with total lead content equal to or less than 0.25% by weighted average

Item Number _____________________________________________ Section/Tag ______________________________________________ Model Specified ___________________________________________ Architect _________________________________________________ Engineer _________________________________________________ Contractor ________________________________________________

Performance Specification ___________________________________________________ • Rated Operating Pressure: 20-125 PSI • Rated Operating Temperature: 40-140ºF

[ ] Submitted as Shown

[ ] Submitted with Variations

Date _____________________________________________________

Warranty ___________________________________________________ • Lifetime Limited Faucet Warranty • 5-Year Limited Cartridge Warranty • 1-Year Limited Finish Warranty

Codes & Standards ___________________________________________________ • ASME A112.18.1/CSA B125.1 • Certified to NSF/ANSI 61, Section 9 by CSA • California Health and Safety Code 116875 (AB1953-2006) • Vermont Bill S.152 • NSF/ANSI 372 Low Lead Content • ADA ANSI/ICC A117.1 • Certified to WaterSense by CSA

ECAST products are intended for installation where state laws and local codes mandate lead content levels or in any location where lead content is a concern.

Last Revision: 04/08/2016 • Date Printed: 12/6/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com

802-VE64XKABCP Manual Faucets Architect/Engineer Specification ________________________________________________________________________________________________________

Operation and Maintenance ________________________________________________________________________________________________________ Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at www.chicagofaucets.com. Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 04/08/2016 • Date Printed: 12/6/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive Des Plaines, IL P: 847/803-5000 F: 847/803-5454 Technical: 800/TEC-TRUE www.chicagofaucets.com