no cartridge


[PDF]no cartridge - Rackcdn.comhttps://b451c108ef7ce3b912eb-75c7695d67180639ae25fac6b37d4ead.ssl.cf3.rackcd...

0 downloads 90 Views 109KB Size

NOTES: 1. Dimensions in millimetres. (1000mm = 1m) 2. General tolerance of dimensions in the drawing: – 0 + 10mm. 3. Admissible floor load: >30 kN/m2. 4. Recommended distance between RBT and display: 10m. 5. Use PVC conduits of 80mm diameter between pit and display. 6. Use cable entrances (A) and/or (B) for position of conduits. Single conduit for all cables at entrance (A) or (B) is possible.

7. The lower end of the left short side of each bed is open for 140mm. Conduits can also be routed through this side. 8. Flat surface of 100mm wide supports the chassis. 9. Pit edging frame available as an option. 10. Equipment dimensions - each bed: 1440 x 660 x 300 mm 11. Equipment dimensions with weighing system - each bed: 1440 x 660 x 310mm 12. Electrical connection: 3 phase 400V / 50Hz / 32A. Motors 2 x 4kW.

1770

Cable entrance right

Cable entrance left

150

70

A

1585

TOP BUILD

Flat steel support

100

Slope 2% 690

Slope 2%

SECTION A-A SCALE 1 : 18

935

Flat steel support

A

Water drain with one way valve

Center line left rollers

300

100

Center line between left & right rollers

535

Center line right rollers

1785

80

1385 3170

310 deep for weighing system DISCLAIMER: This drawing is intended as a general suggestion of a floor layout. The final construction must be carried out by your local installer who will be responsible for complying with legal and safety requirements.

DOC:BOS0022 DRAWN IN ACCORDANCE WITH B.S.308

Drawn

Material

DIMENSIONS IN MILLIMETRES DO NOT SCALE Tolerances Unless Otherwise Stated Angular Issue

Date

Amendment

UNLESS OTHERWISE STATED REMOVE ALL SHARP CORNERS

Date

Finish

D-Rodríguez 11/03/2016

Approved Original Scale

C

This print is the property of Boston Garage Equipment and is a confidential document. It must not be traced copied or exhibited to a third party without permission in writing.

B-Calcutt

FIRST ANGLE PROJECTION

Title

D700 / 701 / 702 Groundwork schematic - No installation cartridge

Drg. No.

Issue

160301_1

A