Model 76C2 MULTI-FUNCTION PCI I/O CARD
FEATURES • Multiple I/O and serial communication functions on a single slot, half size PCI card. • User can specify 3 different function modules. • Automatic background BIT testing continually checks and reports the health of each channel. • Connections via Front Panel, Rear Panel or both. • Designed for both Commercial and Military applications. • Software Support Kit and Drivers available.
DESCRIPTION
The 76C2 is a multi-function PCI I/O and communications card. The “mother board” contains 3 independent module slots, each of which can be populated with a function specific module. This enhanced Motherboard, using multiple DSP, allows for higher processing power and dedicated control for each module. This unique design eliminates the need for multiple specialized, single function cards by providing a single board solution for a broad assortment of signal interface modules, such as I/O, Synchro/Resolver-to-Digital and LVDT. In addition, the 76C2 incorporates serial communication modules such as RS232/422/485 and ARINC429. The available functions are listed on the following page. Our approach increases packaging density, saves enclosure slots, reduces power consumption and adds continuous background BIT testing. A Software Support Kit (SSK) is provided. Future features will add a temperature sensor, an elapsed time indicator and a ferroelectric RAM. Automatic background BIT testing, an important feature is always enabled and continually checks the health of each channel. There is no need to guess or make assumptions about system performance. A fault is immediately reported and the specific channel is identified. This capability is of tremendous benefit because it identifies and reports a failure, without the need to shut down the equipment for troubleshooting. Testing is totally transparent to the user, requires no external programming, has no effect on the standard operation of the card and can be disabled on a per channel basis. (See Operational Manual for further details)
110 Wilbur Place, Bohemia, NY 11716
P: 631.567.1100 / F: 631.567.1823
www.naii.com / e-mail:
[email protected]
GENERAL BOARD SPECIFICATION • Power – +5VDC
●Operating Temp – 0o C to 70o C or -40o C to 85o C
●Size – 106.7mm x 20mm x 167.8mm (half size PCI)
AVAILABLE FUNCTION MODULES A/D Converter
D/A Converter
D/S DLV Discrete I/O TTL Differential Transceiver LVDT S/D RTD ARINC 429 MIL-STD-1553 CANBus RS-232/422/485 Reference
Module C1 C2 C3 C4 Module F1 F3 F5 J3 J5 J8 Module 61 Module 51 Module K6 Module D7 Module D8 Module L1 Module S1 Module G4 Module A4 Module N7 N8 Module P6 Module P8 Module W1
Channels 10 10 10 10 Channels 10 10 4 10 10 4 Channels 3 Channels 3 Channels 16 Channels 16 Channels 11 Channels 4 Channels 4 Channels 6 Channels 6 Channels 2 2 Channels 4 Channels 4 Channels 1
Input Scaling 1.25,2.5,5 or 10 VDC 5,10,20 or 40 VDC 0-25 mA 6.25,12.5,25 or 50 VDC Output Range ±10 or 0-10 VDC ±5 or 0-5 VDC ±20 or 0-20 VDC ±1.25 or 0-1.25 VDC ±2.5 or 0-2.5 VDC ±20 to ±80 VDC Frequency 47 Hz – 10KHz Frequency 47 Hz – 10KHz Input Range 0 – 80 VDC Input Range 0 – 5.5 V Input Range (422) -10V to +10V Frequency 360 Hz to 20 KHz Frequency 50 Hz to 20 KHz Update rate 16.7 Hz/channel Frequency 100 KHz or 12.5 KHz Operational Modes BC,RT, BM, BM/RT BC,RT, BM, BM/RT CAN protocol Version 2.0B Communication Async / Sync Frequency 47 Hz – 10KHz
Resolution 16 bit 16 bit 16 bit 16 bit Resolution 16 bit 16 bit 16 bit 16 bit 16 bit 16 bit Resolution 16 bit Resolution 16 bit Output Range 0 – 80 VDC Output level TTL/CMOS Input Range (485) -7V to +12V Resolution 16 bit Resolution 16 bit Resolution 16 bit Input/output RX/TX Onboard RAM 128Kbyte per ch 128Kbyte per ch Message Buffer RX/TX (0-8 bytes) Data rate (Sync) 4 Mbits/s per ch. Accuracy +/- 2%
Accuracy Sampling (programmable) 0.05% FS 200 KHz max 0.1% FS 200 KHz max 0.1% FS 200 KHz max 0.1% FS 200 KHz max Accuracy Settling time 0.05% FS 15µs max 0.05% FS 10µs max 0.05% FS 10µs max 0.05% FS 10µs max 0.05% FS 350µs max 0.15% FS 10µs max Accuracy Power ± 0.1° 0.25 VA / channel Accuracy Power 0.2% FS 0.1 VA / channel Programmable Input or Output Programmable Input or Output Output Range (422/485) -0.25V to +5V Accuracy Interface 0.025% FS 2,3 or 4 wire Accuracy Tracking Rate 1 arc-min 190 RPS Accuracy Interface 0.05% FS 2, 3 or 4 wire Coupled Transformer Direct Data rate (Async) 1 Mbit/s per ch Voltage Power 2 – 115 Vrms 2.2 VA
1 – Indicates wide selection (See part number in Operations Manual)
76C2 – XX XX XX X X–XX Slot # 1 2 3 MODULE (SLOT) DEFINITION Enter Module (designation) for each one of Slots 1, 2 & 3; enter a “Z0” if slot is not to be populated ENVIRONMENTAL C = 0 TO 70°C E = -40 TO +85°C H = E with conformal coating K = C with conformal coating ENCODER OUTPUTS FOR SYNCHRO / RESOLVER MODULES 0 = No Encoder outputs 1 = Encoders included for each specified Synchro/Resolver module SPECIAL OPTION CODE (OR LEAVE BLANK)
110 Wilbur Place, Bohemia, NY 11716
P: 631.567.1100 / F: 631.567.1823
For detailed specifications & complete part number designation, visit www.naii.com to download Operations Manual. For Ordering Information: Phone – 631-567-1100 Fax – 631-567-1823 E-mail – sales @naii.com
www.naii.com / e-mail:
[email protected]
76C2 Data Sheet Rev A 3
PART NUMBER DESIGNATION
