ORIENTAL LEAN TO WALL GAZEBO Assembly Instructions

---

ORIENTAL LEAN TO WALL GAZEBO Assembly Instructions Item number:0178005

Leg tube Leg tube

Ring beam

Roof tube

Roof tube

Roof tube Roof tube Roof tube Roof tube Roof tube Foot plate

Canopy

Bolt

Bolt

Bolt

Nut

Stake Spanner

Allen key

Insert the foot plate(E) into the leg tube(A1) and align the hole.

Insert the foot plate(E) into the leg tube(A2) and align the hole.

Connect the ring beam (B) to the leg tube (A1) using bolt (I) and nut (J). Tighten securely using Allen Key (L) and Spanner (M).

The exposed hole on the ring beam (B) should be facing up. Connect the ring beam (B) to the leg tube (A2) using bolt (I) and nut (J). Tighten securely using Allen Key (L) and Spanner (M).

The exposed hole on the ring beam (B) should be facing up.

Connect the roof tube (C1) and leg tubes (A1 & A2) using bolt (I) and nut (J). Tighten securely using Allen Key (L) and spanner (M).

Attach two of the roof tubes (C3) to the ring beam (B), as pictured using bolts (G).

Slide the tubes from the centre of the gazebo to the outer edge.

Attach another roof tube (C3) to the ring beam (B), as pictured using bolts (G).

Insert the roof tubes (D1 & D3) into the third roof tube (C3) and connect into the corresponding tubes (D2 & D4). Secure these using bolt (H) refer to image.

Complete the frame assembly by connecting roof tube (D1 & D3) with roof tube (C2) and leg tube (A1 & A3). Secure using bolt (I) and nut (J). Tighten with Allen Key (L) and spanner (M).

Secure all the roof tubes at the edges (C1 & C2) using bolts (G) as pictured. Tighten with Allen Key (L).

Cover the gazebo frame with the canopy (F). Use bolts (G) to secure the corners of the canopy with the frame.

Once you have located your gazebo in the desired location you can secure the gazebo down by inserting the stakes (K) through the foot plate (E) and into the ground. Your gazebo is now ready for use.