WHAT’S IN THE BOX
PLANER
Planer
400W
ORIGINAL INSTRUCTIONS SPECIFICATIONS Input Power: No Load Speed: Planing Width: Blade Type: Planing Depth: Rebate Depth: Weight:
400W 16,000/min 82mm HSS Blades 0-1mm 0-2mm 2.15kg
Guide Fence
ozito-diy.co.uk
Spanner
PLR-2000U
WARRANTY All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the customer service number shown. Please note the following terms under which guarantee claims can be made: 1. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you. 2. The warranty services only covers defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below are limited to either the rectification of said defects on the product or the replacement of the product, whichever we prefer. Please note that our devices are not designed for use in commercial, trade or professional applications. A guarantee contract will not be created if the device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period. 3. The following are not covered by our guarantee: - Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by exposing the device to abnormal environmental conditions or by lack of care and maintenance. - Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. 4. Your Product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies if an on-site service is used. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT. Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing parts as set out in the service information in these operating instructions. CUSTOMER SERVICE HELPLINE GB: 0151 294 4488 IRL: 1850 882711 Ozito-diy.co.uk
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
0616
KNOW YOUR PRODUCT PLANER 1. Fence Securing Knob
5. Lock Off Button
2. Depth Adjustment Knob
6. Rear Shoe
3. Front Shoe
7. Base Park Shoe
SETUP & PREPARATION 1. ADJUSTING PLANING DEPTH Before you make any adjustments, make sure the power cord is disconnected from the electricity supply
4. On/Off Switch Planing depth can be adjusted between 0 and 1mm.
1. Increase cutting depth.
2. Decrease cutting depth.
ACCESSORIES 8. Guide Fence 9. Spanner
3. The numbers on the depth adjustment correspond to the planing depth (mm). Always test on a scrap workpiece first.
ONLINE MANUAL Scan this QR Code with your mobile device to take you to the online manual.
OPERATION 2. ON/OFF SWITCH
3. REBATING
The tool is recommended for use with a residual current device with a rated residual current of 30mA or less.
Fitting of the Guide Fence 1. Loosen fence securing knob.
2. Insert guide fence to the required depth.
1. Press and hold lock off switch.
3. Tighten fence securing knob.
2. Press on/off switch (a), then release lock off button (b).
b a
Making a Rebate Cut
3. Release on/off switch to turn off.
4. Mark out area for rebate.
4. Wait until blade stops completely before putting planer down.
5. Adjust guide fence for required rebate.
3. Plane along workpiece using the fence as a guide.
Note: It will be necessary to make a number of cuts to complete most rebates.
4. CHAMFERING The planer has a precision machined groove in the front shoe for planing along the corner of your workpiece.
1. Set required depth on planer.
2. Place groove precisely on the corner of the workpiece.
5. BLADES Changing Blades Before you make any adjustments, make sure the power cord has been disconnected from the electricity supply. The blades that come fitted to the tool are 82mm HSS blades. The drum is fitted with two separate blades; both must be reversed or replaced at the same time. Never replace only one blade.
1. Loosen the 3 hex head screws using the spanner provided.
2. Push the used blade out through the slot in the motor housing using a screwdriver. Keep fingers away from blade.
3. Install new blades. Note: Blades are reversible. If changing blades for the first time, turn over the blades to expose a fresh cutting edge.
4. Tighten the 3 hex head screws.
3. Plane along the edge of your workpiece.
5. Repeat the process for the second blade.
PLR-2000U
MAINTENANCE
TROUBLESHOOTING
• Keep the ventilation vents of the planer clean at all times, if possible, prevent foreign matter from entering the vents. • After each use, blow air through the planer housing to ensure it is free from all dust particles which may build up. Build up of dust particles may cause the planer to overheat and fail. • If the enclosure of the planer requires cleaning, do not use solvents but a moist soft cloth only. Never let any liquid get inside the planer; never immerse any part of the planer into a liquid.
Sparking visible through the housing air vents
Carbon Brushes When the carbon brushes wear out, the planer will spark and/or stop. Discontinue use as soon as this happens. They should be replaced prior to recommencing use of the planer. Carbon brushes are a wearing component of the planer, and are not covered under warranty. Continuing to use the planer when carbon brushes need to be replaced may cause permanent damage to the planer. Carbon brushes will wear out after many uses but when the carbon brushes need to be replaced, take the planer to an electrician or a power tool repairer for a quick and low cost replacement. Always replace both carbon brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the planer by an unauthorised person or by mishandling of the planer.
A small amount of sparking may be visible through the housing vents. This is normal and does not indicate a problem.
Excessive sparking visible through the housing air vents and/or the planer failing to operate May indicate the carbon brushes have worn out and need to be replaced. Carbon brushes should only be replaced by a qualified electrician or power tool repairer.
SPARE PARTS Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse or Homebase store. For further information, or any parts visit www.ozito-diy.co.uk or contact Ozito Customer Service: Great Britain: 0151 294 4488 Ireland: 1850 882711
DESCRIPTION OF SYMBOLS V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or reciprocation per minute
no
No load speed
Read instruction manual Double insulated
Warning
E-mail:
[email protected]
ELECTRICAL SAFETY Before you connect the equipment to the mains supply make sure that the data on the rating plate are identical to the mains data.
This tool is double insulated therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. Using an Extension Lead Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective. When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
PLANER SAFETY INSTRUCTIONS WARNING! • Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury. • Hold the power tool by insulated gripping surfaces only, because the cutter may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. • Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body leaves it unstable and may lead to loss of control. • Recommendation that the tool always be supplied via a residual current device with a rated residual current of 30 mA or less. • If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. WARNING! Use of this tool can generate dust containing chemicals known to cause cancer, birth defects or other reproductive harm. Use appropriate respiratory protection. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. • Be sure to read the instruction manual thoroughly before using this tool. • Be sure the voltage agrees with specific data on the nameplate.
• Be sure the switch is in OFF position before connecting tool to the power supply. • Be sure to switch OFF immediately if the tool is jammed in work. • Be sure the tool is disconnected from power source when cleaning or making adjustments to the tool. • Be sure the tool is properly held and set for correct use before turning switch to ON. • Be sure to use specified replacement parts only. • Be sure to maintain tool with care. Follow instructions for lubricating and changing accessories. • Be sure to store tool in a clean dry place after disconnecting from power source. • Keep air vents unobstructed for proper motor cooling. • DO NOT lay tool down on shoe when the blades are exposed. This can chip the blades. • Keep side dust extraction port unobstructed at all times. • Never reach under the tool for any reason unless it is turned off and UNPLUGGED. BLADES ARE EXPOSED AND EXTREMELY SHARP. • Use this tool for working with wood and wood products only. • Never operate without securely holding the front handle. • Always operate planer with two hands. • Planer blades are extremely sharp – Handle with great care. WARNING! Some wood contains preservatives such as copper chromium arsenate (CCA) which can be toxic. When sanding, drilling, or cutting these materials extra care should be taken to avoid inhalation and minimise skin contact.
Service information We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.
Wear parts*
Category
Consumables* Missing parts
Carbon brushes
Example
Planing knives
* Not necessarily included in the scope of delivery! In the effect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:
• • •
Did the equipment work at all or was it defective from the beginning? Did you notice anything (symptom or defect) prior to the failure? What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.
Declaration of confirmity
PLR-2000U
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar explains the following conformity according to EU directives and norms for the following product
GB Additonal operating & safety instructions Planer
Planer PLR-2000U (Ozito) 2014/29/EU
2005/32/EC_2009/125/EC 2014/35/EU 2006/28/EC
X 2006/42/EC
Annex IV
Notified Body: Notified Body No.: Reg. No.:
2000/14/EC_2005/88/EC Annex V Annex VI
X 2014/30/EU
2014/32/EU 2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC 89/686/EC_96/58/EC
Noise: measured LWA = dB (A); guaranteed LWA = dB (A) P = KW; L/Ø = cm Notified Body:
2012/46/EU Emission No.:
X 2011/65/EU
Standard references: EN 60745-1; EN 60745-2-14; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3 Landau/Isar, den 28.06.2016
Weichselgartner/General-Manager
Yang/Product-Management
Archive-File/Record: NAPR014318 Documents registrar: R. Gehard Wiesenweg 22, D-94405 Landau/Isar
First CE: 16 Art.-No.: 44.722.42 I.-No.: 11016 Subject to change without notice
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.
Caution! Wear ear-muffs. The impact of noise can cause damage to hearing.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the iSC GmbH.
- 135 -
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!
Beiblatt_PLR_2000U.indd 1
size 445 x 210 mm
Subject to technical changes
28.06.2016 14:24:55
Items supplied Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions. • Open the packaging and take out the equipment with care. • Remove the packaging material and any packaging and/or transportation braces (if available). • Check to see if all items are supplied. • Inspect the equipment and accessories for transport damage. • If possible, please keep the packaging until the end of the guarantee period. Danger! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating! Proper use The hand-held electric planer is designed for planing, rabating and chamfering pieces of wood. The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes. Technical data Mains voltage:.......................... 230-240 V ~ 50 Hz Power input:................................................ 400 W Idling speed:........................................16,000/min Chip depth:............................................... 0-1 mm Rebate depth:........................................... 0-2 mm Plane width:................................................82 mm Protection class: ............................................. II/&
Beiblatt_PLR_2000U.indd 2
Sound and vibration Sound and vibration values were measured in accordance with EN 60745. LpA sound pressure level ......................... 83 dB(A) KpA uncertainty .............................................. 3 dB LWA sound power level ........................... 94 dB(A) KWA uncertainty ............................................. 3 dB Wear ear-muffs. The impact of noise can cause damage to hearing. Total vibration values (vector sum of three directions) determined in accordance with EN 60745. Vibration emission value ah = 7.3 m/s2 K uncertainty = 1.5 m/s2 The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances. The specified vibration value can be used to compare the equipment with other electric power tools.
Caution! Residual risks Even if you use this electric power tool in accordance with instructions, certain residual risks cannot be rules out. The following hazards may arise in connection with the equipment’s construction and layout: 1. Lung damage if no suitable protective dust mask is used. 2. Damage to hearing if no suitable ear protection is used. 3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained.
For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot. Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any accessories or aids without electrical components supplied with the old equipment.
The specified vibration value can be used for initial assessment of a harmful effect. Keep the noise emissions and vibrations to a minimum. • Only use appliances which are in perfect working order. • Service and clean the appliance regularly. • Adapt your working style to suit the appliance. • Do not overload the appliance. • Have the appliance serviced whenever necessary. • Switch the appliance off when it is not in use. • Wear protective gloves.
size 445 x 210 mm
28.06.2016 14:24:55
