PCI Express (PCIe) CONTROL


[PDF]PCI Express (PCIe) CONTROLc1170156.r56.cf3.rackcdn.com/UK_NAI_79C3_DS.pdfCachedMultiple I/O and serial communication functions on a single slot, ...

23 downloads 296 Views 162KB Size

Model 79C3 PCIe MULTI-FUNCTION I/O CARD

PCI Express (PCIe) CONTROL A/D, D/A, Discrete/TTL/CMOS/Differential I/O, RTD, Synchro/Resolver/LVDT/RVDT Measurement and Simulation, Encoder/Counter ARINC 429/575, RS-422/485/232, MIL-STD-1553, CANBus

FEATURES Multiple I/O and serial communication functions on a single slot, half size PCIe (x1) card User can specify three different function modules Automatic background BIT testing continually checks and reports the health of each channel Connections via Front Panel Designed for both Commercial and Rugged applications Software Support Kit and Drivers available

User I/O Analog & Digital Signals

DESCRIPTION The 79C3 is a PCIe (x1), multi-function I/O and communications card. The motherboard contains three independent module slots, each of which can be populated with a function-specific module. The enhanced motherboard using multiple DSPs enables higher processing power and dedicated control for each module. This unique design eliminates the need for multiple specialized, single function cards by providing a single board solution for a broad assortment of signal interface modules, such as I/O, Synchro/Resolver/LVDT/ RVDT measurement and simulation. In addition, the 79C3 incorporates serial communication modules such as RS232/422/485 and ARINC429. (See available functions on the following page.) This approach increases packaging density, saves enclosure slots, reduces power consumption and adds continuous background, built-in-testing (BIT). A Software Support Kit (SSK) is provided which provides helpful documentation and sample code. BIT, a highly beneficial feature, is always enabled and continually checks the health of each channel, ensuring optimal system performance. A possible fault is immediately reported and the specific channel is identified, eliminating the possibility of any equipment downtime. Testing is totally transparent to the user, requires no external programming, has no effect on the standard operation of the card and can be disabled on a per-channel basis. (See Operations Manual for further details.)

110 Wilbur Place, Bohemia, NY 11716

P: 631.567.1100 / F: 631.567.1823

Function Module #1 FPGA, DSP & Memory

Function Module #2 FPGA, DSP & Memory

Function Module #3 FPGA, DSP & Memory

Inter-Module Bus

PCIe Bus (x1)

FPGA Main DSP Memory

79C3 PCIe Multi-function I/O Card

www.naii.com

GENERAL BOARD SPECIFICATION ●Operating Temp – 0o C to 70o C or -40o C to 85o C

AVAILABLE FUNCTION MODULES A/D Converter

D/A Converter

D/S DLV Discrete I/O TTL Differential Transceiver Encoder LVDT S/D RTD Strain Gage ARINC 429/575 MIL-STD-1553

CANBus RS-232/422/485 Reference

●Size – 106.7mm x 20mm x 167.8mm (half size PCIe)

1 – Indicates wide selection (See part number in Operations Manual)

Module C1 C2 C3 C4 CA Module F1 F3 F5 J3 J5 J8 Module 61 Module 51 Module K6 (v4) Module D7 Module D8 Module

Channels 10 10 10 10 10 Channels 10 10 4 10 10 4 Channels 3 Channels 3 Channels 16 Channels 16 Channels 11 Channels

Input Scaling Resolution Accuracy Sampling (programmable) 1.25,2.5,5 or 10 VDC 16 bit 0.05% FS 200 KHz max 5,10,20 or 40 VDC 16 bit 0.1% FS 200 KHz max 0-25 mA 16 bit 0.1% FS 200 KHz max 6.25,12.5,25 or 50 VDC 16 bit 0.1% FS 200 KHz max (Channels 1-6 are C2 type and Channels 7-10 are C3 type) Output Range Resolution Accuracy Settling time 10 or 0-10 VDC 16 bit 0.05% FS 15 s max 5 or 0-5 VDC 16 bit 0.05% FS 10 s max 25 or 0-25 VDC 16 bit 0.05% FS 10 s max 1.25 or 0-1.25 VDC 16 bit 0.05% FS 10 s max 2.5 or 0-2.5 VDC 16 bit 0.05% FS 10 s max 20 to 100 VDC 16 bit 0.15% FS 350 s max Frequency Resolution Accuracy Power 47 Hz – 10 KHz 16 bit ± 0.1° 0.25 VA / channel Frequency Resolution Accuracy Power 47 Hz – 10 KHz 16 bit 0.2% FS 0.1 VA / channel Input Range Output Range Programmable 0 – 60 VDC 0 – 60 VDC Input or Output Input Range Output level Programmable 0 – 5.5 V TTL/CMOS Input or Output Input Range (422) Input Range (485) Output Range (422/485) -10V to +10V -7V to +12V -0.25V to +5V Signal Voltage Resolution Counter Modes

E7 Module

4 Channels

24 VDC Frequency

32 bit Resolution

SSI, Encoder, Quadrature Accuracy Interface

L1 Module S1 Module G4 Module G5 Module A4 Module N7 N8 Module P6 Module

4 Channels 4 Channels 6 Channels 4 Channels 6 Channels 2 2 Channels 4 Channels

360 Hz to 20 KHz Frequency 50 Hz to 20 KHz Update rate 16.7 Hz/channel Update rate 2.3 Hz – 2.4 KHz Frequency 100 KHz or 12.5 KHz Operational Modes BC,RT, BM, BM/RT BC,RT, BM, BM/RT CAN protocol Version 2.0B Communication

16 bit Resolution 16 bit Resolution 16 bit Resolution 16 bit Input/output RX/TX Onboard RAM 128Kbyte per ch 128Kbyte per ch Message Buffer 16K RX/TX Data rate (Sync)

0.025% FS Accuracy 1 arc-min Accuracy 0.05% FS Accuracy (±) 0.1% FS Message Buffer 256 word Tx/Rx Coupled Transformer Direct Data rate (Prog) 1 Mb/s max. Data rate (Async)

2 or 3/4 wire Tracking Rate 190 RPS Interface 2, 3 or 4 wire Interface Conventional 4-arm bridge

P8 Module W1

4 Channels 1

Async / Sync Frequency 47 Hz – 20KHz

4 Mbits/s per ch. Accuracy +/- 3%

1 Mbit/s per ch Voltage 2 – 115 VRMS

32 KB Power 6 VA

PART NUMBER DESIGNATION

Notes Bosch® IP Core Tx/Rx Buffer Notes Part modem

79C3 – XX XX XX X X - XX Slot #

1 2 3 MODULE (SLOT) DEFINITION Enter module designation (i.e.C1) for each slot 1, 2, 3 Enter “Z0” if slot is not populated. ENVIRONMENTAL C = 0 TO 70 C; E = -40 TO +85 C; H = E with conformal coating K = C with conformal coating ENCODER OUTPUTS FOR SYNCHRO / RESOLVER MODULES 0 = No Encoder outputs; 1 = Encoders included for each specified Synchro module SPECIAL OPTION CODE (or leave blank)

110 Wilbur Place, Bohemia, NY 11716

P: 631.567.1100 / F: 631.567.1823

For Ordering Information: Phone – 631-567-1100 Fax – 631-567-1823

www.naii.com

79C3 Data Sheet Rev A1

Power – +5VDC