[PDF]PDF Format - Rackcdn.comc24110ab053e5c234c6f-9b7150e100ab604df0aafbaf58c9fe02.r58.cf3.rackcdn.com/...
0 downloads
131 Views
479KB Size
NOTES PLEASE READ THIS DRAWING WITH THE FOLLOWING DRAWINGS: MECHANICAL SERVICES DETAILS & NOTES - DET17/051/01 TYPICAL DWELLING HEATING & DOMESTIC SERVICES DISTRIBUTION SCHEMATIC - SC17/051/01 THE LATEST KITCHEN MANUFACTURERS DRAWINGS & ARCHITECTS BATHROOM DRAWINGS. LIFETIME HOMES SPECIFICATION ALL CONTROLS INCLUDING AECV, SC & THERMOSTATS TO BE BETWEEN 450mm-1200mm AFFL & AT LEAST 300mm AWAY FROM ANY INTERNAL CORNER.
HWS cylinder (below MVHR unit).
Ø15 HWS and MWS (Balanced) to drop to L/L with connections to WC and WHB.
Store
HRV3 Q+
Wall mounted MVHR unit.
Store FS FS FS
FS
FS FS
bathroom
bathroom
Ø22 HWS and MWS (Balanced & Unbalanced) at H/L. FS FS
en suite
FS
Ø22 HWS and (Balanced) MWS drop to L/L with connections to bath (with TMV).
W'robe
W'robe
F-09
en suite
F-09 204 x 60 ducts at H/L (typical).
Bedroom 2
Bedroom 1
Ø125 supply duct drops T/B c/w fire collar below. FS
Bedroom 2
Bedroom 1
Bedroom 3
Ø125 extract duct rises F/B c/w fire collar below.
W'robe
FS
W'robe
Ø22 HWS drop T/B Ø22 MWS (Unbalanced) rises F/B Ø22 HWS and MWS (Balanced) branch at L/L with connections to shower (with TMV), WHB and WC.
Bedroom 3
Minimum distance between wall & grille to be 200mm (Typical) 204 x 60 intake and exhaust ducts terminate with high capacity air brick (to architect's positions as shown on elevation drawings). Ducts to & from atmosphere to be insulated.
Water Services Layout
Ventilation Services Layout
Wall mounted HIU. c/w Iocal IV's & flushing bypass Please refer to Drg SC17-051-01 for more information
Store
RE
Store
Ø22 DHTG F&R F/B connects to HIU. R9
en suite R10
Existing Ø110 SVP with Ø40 shower, Ø32 WHB and Ø110 WC waste connections.
RE
RE
HTG F&R manifolds at H/L. RE
W'robe
en suite
Ø40 bath waste to drop T/B.
F-09
F-09
AS BUILT
W'robe
W'robe
Zone 2 thermostat. Radiator connections to drop T/B.
Ø22 HTG F&R to manifolds.
W'robe
RE
bathroom
bathroom R11
RE
Existing Ø110 SVP with Ø110 WC and Ø32 WHB waste connections, and Ø32 drain connections for HIU, MVHR and HWS cylinder, all via tundish and waterless trap.
R6 Radiator connections drop to L/L (typical).
Bedroom 2
Bedroom 1
R8
Bedroom 2
Bedroom 1 Bedroom 3
Bedroom 3 R7
Heating Services Layout
SERVICEPLAN
Drainage Services Layout
THIS DRAWING IS BASED ON THE FOLLOWING:CONSULTANTS DRG K170123-M(C)126 rev C2&C3 ARCHITECTS DRG 1901/C/C110 rev C2