Aluminum Probe Holder PHS-C KEY FEATURES AND APPLICATION The PHS-C probe Aluminum holder may be used (as an option) to position a SENIS Hall probe in an environment with an extended operating temperature (up to +100ÂșC) and/or to protect the probe from mechanical damage. The probe is enclosed into an aluminum tube (length: approximately 1m, external diameter: 8mm). The probe can be easily disassembled and re-assembled into the support structure if necessary for re-calibration.
Figure 1.
Photo of the PHS-C Probe Holder with a SENIS Hall probe installed enclosed in the holder
Figure 2.
Mechanical specifications of the PHS-C Probe Holder. DETAIL A defines positive polarities for each of the X, Y and Z measurement axis.
SENIS AG Grabenstrasse 25, 6340 Baar, Switzerland Web : www.senis.ch ; Email:
[email protected] Phone: +41 (44) 508 7029; Fax: +41 (43) 205 2638
North American Distributor: GMW Associates 955 Industrial Road, San Carlos, CA 94070, USA Web: www.gmw.com ; Email:
[email protected] Phone: +1 (650) 802 8292; Fax: +1 (650) 802 8298
Rev.01, Nov. 2012 Page 1/1