2m CUBE
= 1130mm fill height, 1800mm wide, 1080mm depth. (inside measurements)
1.5m CUBE = 880mm fill height, 1800mm
wide,
1080mm depth. (inside measurements)
HOOK BIN pivot frame option (galvanised) FRONT LOAD fork sleeve option (as shown)
Box section top rim, Tough polyethylene plastic, 9mm wall thickness
Weather proof & lockable, Nest together.
Trolley castor wheel & bung option, Mould in Graphics company name option.
Lids are twin skin & reversible, either left or right side. Fiberglass hinge rod, no rust.
Lids are 925mm x 1160mm long. (more details following page)
.
Plast Plast--ax provides solutions for its’ clients’ needs with design assistance and excellence in manufacturing plastic and composite products. We aim to get it right first time, every time.
PLAST-AX Ph: 0800 788 780
Fax: 06 344 8498
Email:
[email protected] Web:
www.plast-ax.co.nz
4 Leamington St, PO Box 2040, Wanganui, New Zealand.
BINS and LIDS are Box section at top rim and hinge area for incredible strength. (see cut out views)
Fork sleeves, lids and locking bars are replaceable.
Strong fully moulded hinge sleeves on lids and bins to support fiberglass hinge rod.
Internally fully moulded M10 thread inserts allow for clean non rust area within bin, Fork or Hook galvanised sleeves then bolt into these from the outside.
Plast Plast--ax provides solutions for its’ clients’ needs with design assistance and excellence in manufacturing plastic and composite products. We aim to get it right first time, every time.
PLAST-AX Ph: 0800 788 780
Fax: 06 344 8498
Email:
[email protected] Web:
www.plast-ax.co.nz
4 Leamington St, PO Box 2040, Wanganui, New Zealand.