PLT-50101 LED Retrofit Strip Kit Installation Instructions


[PDF]PLT-50101 LED Retrofit Strip Kit Installation Instructions - Rackcdn.comhttps://a89b8e4143ca50438f09-7c1706ba3fabeeda794725d88e4f5e57.ssl.cf2.rac...

0 downloads 128 Views 428KB Size

INSTALLATION INSTRUCTIONS FOR THE 4RB, 8RB - SERIES RETROFIT KIT     APPLICATION: General/Perimeter Lighting

Strip fixture with T8 bulbs and ballast 

1‐ Turn off power  2‐ Remove ballast/wireway cover from existing strip fixture 

3‐ Remove lampholders and socket bars from existing  strip housing  4‐ Remove ballast 

LED-4RB,8RB - X1 RETRO-BWE Rev.0

Page 1

4RB – 4ft - X1 LED retrofit kit  

5‐ Install red sockets to one end of the fixture.

6‐ Install green sockets to the opposite end of the fixture.

7‐ Remove the knock-out in desired location. Bring the quick disconnect thru.

8‐ Re-Install the cover to the pan.

9‐ With the power still disconnected, install the LED lamps to the fixture. Then test the fixture. NOTE: 8RB IS MADE FROM (2) 4RB KITS COMBINED LED-4RB,8RB - X1 RETRO-BWE Rev.0

Page 2