pure water

---

ES-WQ-PWSYS-WH-SOFT-5600

For Residential and Light Commercial Applications Job Name ––––––––––––––––––––––––––––––––––––––––––––

Contractor –––––––––––––––––––––––––––––––––––––––––––––

Job Location ––––––––––––––––––––––––––––––––––––––––––

Approval ––––––––––––––––––––––––––––––––––––––––––––––

Engineer ––––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––

Approval ––––––––––––––––––––––––––––––––––––––––––––––

Representative –––––––––––––––––––––––––––––––––––––––––

Series PWSYS-WH-SOFT-5600

PURE WATER

Whole House Water Softeners Connection Size: 1" (25mm) Flow Rate: Up to 13 gpm (49 lpm) Our PWSYS-WH-SOFT-5600 Series water softeners are designed for residential applications up to 13 gallons per minute peak flow rate. This is our most popular selling series because they are priced right and constructed of time proven materials.

Features • Economical • Top quality components • Fully assembled and ready for installation • Capacities up to 60,000 grains • User friendly 5600 control valve • Brine tanks with grid plates and safety floats • 1" plumbing connections

Series PWSYS-WH-SOFT-5600

Softening Media Our ion exchange media is a high-capacity polystyrene resin that combines high operating capacity with excellent chemical and physical stability for a long dependable life.

5600 Series Control Valve

Feed Water Guidelines

The 5600 series control valve has enjoyed years of continuous service in the water treatment industry. It is one of the longest running valve series on the market today. We use a metered initiated regeneration so that your system regenerates only when necessary with an accurately measured amount of sodium to conserve water and salt. The valve combines simplicity and durability all in one.

pH . . . . . . . . . . . . . . . . . . . . . . . . 6 to 10 Hardness (maximum). . . . . . . . . . Depends on customers acceptable hardness leakage level. Water Pressure. . . . . . . . . . . . . . . 25psi to 125psi (171 kPa to 8.5 bar) Temperature. . . . . . . . . . . . . . . . . 34°F- 110°F (1°F - 43°C) Free Chlorine (maximum). . . . . . . 1mg/L Iron (maximum). . . . . . . . . . . . . . . 1mg/L Oil and H2S. . . . . . . . . . . . . . . . . None Allowed Turbidity. . . . . . . . . . . . . . . . . . . . Less than 5.0 NTU

Resin Tank Features a non-corrosive fiberglass tank with a thermoplastic inner liner. The tanks are approved by NSF, UL, DA, and meet WQA standard S-100.

Brine Tank/Cabinet The brine tank is a combination brine maker and salt storage vessel that is made of tough corrosion free polyethylene and comes with a safety float to guard against brine tank overflow issues.

* For all other guideline information please contact your Watts representative. Note: Capacities are based on resin manufacturer's data and are dependent on influent water TDS, temperature, bed depth, and flow rates. Feed water must be free of oil and color.

Note: Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before or after the system.

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

PWSYS-WH-SOFT-5600 PWSYS-WH-SOFT-5600-30K

PWSYS-WH-SOFT-5600-45K

PWSYS-WH-SOFT-5600-60K

30,000/20,000 15/6 300 8.8 2.0 1⁄2" NPT 1” 120V/60Hz 9" x 48" 18"D x 33"H 31 X 19 112

45,000/30,000 22.5/9 300 10 2.4 1⁄2" NPT 1” 120V/60Hz 12" x 52" 18"D x 33"H 32 x 19 130

60,0000/40,000 30/12 300 10 3.5 1⁄2" NPT 1" 120V/60Hz 12" x 52" 18"D x 33"H 34 x 19 190

Max/Min Ion Exchange Capacity Lbs of salt required for Max/Min capacity Salt Storage Capacity Flow Rate in GPM @ 15 PSI Drop Backwash Flow Rate GPM Drain Line Connection Size Inlet/Outlet Pipe Size Electrical Requirements Mineral Tank Size Brine Tank Size Floor space required in inches W x D Approximate Shipping Weight Lbs

D

A

C E

B

Side View

Back View

Dimensions Model NO.

PWSYS-WH-SOFT-5600-30K PWSYS-WH-SOFT-5600-45K PWSYS-WH-SOFT-5600-60K

Tank (A & B)

INlet E

Outlet E

in.

mm

in.

mm

in.

mm

9 x 48 10 x 54 12 x 52

229 x 1219 254 x 1372 305 x 1321

49 55 54

1245 1397 1372

49 55 54

1245 1397 1372

A Watts Water Technologies Company

ES-WQ-SYS-WH-SOFT-5600 1122

OVERALL HEIGHT C in. mm

OVERALL DEPTH D in. mm

56 62 60

13 13 14

1422 1575 1524

330 330 356

BRINE TANK in.

mm

18 x 33 18 x 33 18 x 33

457 x 838 457 x 838 457 x 838

USA: North Andover, MA • Tel. (800) 224-1299 • www.watts.com Canada: Burlington, ON • Tel. (888) 208-8927 • www.wattscanada.ca

© 2011 Watts