Integrated Leak Patient Interface
Philips Healthcare is part of
Philips Respironics Asia Pacific
Royal Philips Electronics
+65 6882 5282
How to reach us
Philips Respironics Australia
www.philips.com/healthcare
+61 (2) 9666 4444
[email protected]
Circuit Tubing
Philips Respironics China
Asia
+86 021 24127311
+49 7031 463 2254
Philips Respironics Deutschland
Europe, Middle East, Africa
Bacteria Filter (optional)
Breathing Circuit Connection
+49 7031 463 2254
+33 2 51 89 36 00
+55 11 2125 0744
Philips Respironics Italy +39 039 203 1
+1 425 487 7000 800 285 5585 (toll free, US only) Philips Respironics
+46 8 120 45 900
+41 6 27 45 17 50
Murrysville, PA 15668
Philips Respironics United Kingdom
Customer Service
+44 800 1300 845
+1 724 387 4000
Disposable Ultra-fine Filter (optional)
Philips Respironics Sweden
Philips Respironics Switzerland
1010 Murry Ridge Lane
Filter Cap
+49 8152 93 06 0 Philips Respironics France
Latin America
North America
Reusable Gray Foam Filter (required)
800 345 6443 (toll free, US only)
www.philips.com/respironics
Philips Respironics International Headquarters +33 1 47 28 30 82
Jumper Cord
Respironics, Harmony, BiPAP, Bi-Flex are trademarks of Respironics, Inc. and its affiliates.
Power Supply
Please visit www.philips.com/respironics Power Cord
AC Extention Cable
BiPAP Harmony
© 2011 Koninklijke Philips Electronics N.V. All rights are reserved. Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. Broudy AE 1/31/11 MCI 4103854 PN 1081141
Quick set-up guide
Some definitions
Setting ventilation
IPAP Inspiratory pressure
CPAP Continuous pressure mode
EPAP PEEP = Positive End Expiratory
S
Pressure
appears on the screen, the machine is unlocked;
go directly to frames
S/T Spontaneous mode with
PS Pressure support = IPAP –
and
.
controlled breath
“0” flash on the screen:
(Respiratory rate)
T
S
Ti Machine
Ti Patient
S Ti Patient
PS
60 sec. /BPM
Patient apnea alarm
Alarm on
Patient disconnection alarm
Rise time Inspiratory time
Humidifier on
3. To reach the IPAP screen, press
button
Icons
.
set to 1 by pressing
Alarm Reset
Button
Machine unlocked
Press to go back
SmartCard
to the main
Backlight Patient time meter
or
5. To reach the EPAP screen, press
Press
and
to change the setting
Press
and
to
screen
or
.
. or
.
7. To reach the breath rate screen, then the inspiratory time, the rise time... etc, repeat this key combination. > To come back to the main screen at any time: Press
navigate through the different setting screens (modes, IPAP, EPAP, etc)
.
.
4. To change the IPAP setting, press
6. To change the EPAP setting, press
Bi-Flex parameter
Pressure ramp
.
2. To change the ventilation mode, press
t
Press on/off
several times to reach the unlock screen, “
1. To reach the mode screen, press
EPAP
together for more than 2 seconds
Pressure IPAP
and
2) To keep the machine unlocked, press
BPM Breaths per minute
Ti Inspiratory time for the
> To unlock the machine, 1) Hold
backup rate
EPAP
S/T mode
> If
Spontaneous mode
> To start ventilation: Press on/off button
” and
Some definitions
Setting ventilation
IPAP Inspiratory pressure
CPAP Continuous pressure mode
EPAP PEEP = Positive End Expiratory
S
Pressure
appears on the screen, the machine is unlocked;
go directly to frames
S/T Spontaneous mode with
PS Pressure support = IPAP –
and
.
controlled breath
“0” flash on the screen:
(Respiratory rate)
T
S
Ti Machine
Ti Patient
S Ti Patient
PS
60 sec. /BPM
Patient apnea alarm
Alarm on
Patient disconnection alarm
Rise time Inspiratory time
Humidifier on
3. To reach the IPAP screen, press
button
Icons
.
set to 1 by pressing
Alarm Reset
Button
Machine unlocked
Press to go back
SmartCard
to the main
Backlight Patient time meter
or
5. To reach the EPAP screen, press
Press
and
to change the setting
Press
and
to
screen
or
.
. or
.
7. To reach the breath rate screen, then the inspiratory time, the rise time... etc, repeat this key combination. > To come back to the main screen at any time: Press
navigate through the different setting screens (modes, IPAP, EPAP, etc)
.
.
4. To change the IPAP setting, press
6. To change the EPAP setting, press
Bi-Flex parameter
Pressure ramp
.
2. To change the ventilation mode, press
t
Press on/off
several times to reach the unlock screen, “
1. To reach the mode screen, press
EPAP
together for more than 2 seconds
Pressure IPAP
and
2) To keep the machine unlocked, press
BPM Breaths per minute
Ti Inspiratory time for the
> To unlock the machine, 1) Hold
backup rate
EPAP
S/T mode
> If
Spontaneous mode
> To start ventilation: Press on/off button
” and
Some definitions
Setting ventilation
IPAP Inspiratory pressure
CPAP Continuous pressure mode
EPAP PEEP = Positive End Expiratory
S
Pressure
appears on the screen, the machine is unlocked;
go directly to frames
S/T Spontaneous mode with
PS Pressure support = IPAP –
and
.
controlled breath
“0” flash on the screen:
(Respiratory rate)
T
S
Ti Machine
Ti Patient
S Ti Patient
PS
60 sec. /BPM
Patient apnea alarm
Alarm on
Patient disconnection alarm
Rise time Inspiratory time
Humidifier on
3. To reach the IPAP screen, press
button
Icons
.
set to 1 by pressing
Alarm Reset
Button
Machine unlocked
Press to go back
SmartCard
to the main
Backlight Patient time meter
or
5. To reach the EPAP screen, press
Press
and
to change the setting
Press
and
to
screen
or
.
. or
.
7. To reach the breath rate screen, then the inspiratory time, the rise time... etc, repeat this key combination. > To come back to the main screen at any time: Press
navigate through the different setting screens (modes, IPAP, EPAP, etc)
.
.
4. To change the IPAP setting, press
6. To change the EPAP setting, press
Bi-Flex parameter
Pressure ramp
.
2. To change the ventilation mode, press
t
Press on/off
several times to reach the unlock screen, “
1. To reach the mode screen, press
EPAP
together for more than 2 seconds
Pressure IPAP
and
2) To keep the machine unlocked, press
BPM Breaths per minute
Ti Inspiratory time for the
> To unlock the machine, 1) Hold
backup rate
EPAP
S/T mode
> If
Spontaneous mode
> To start ventilation: Press on/off button
” and
Integrated Leak Patient Interface
Philips Healthcare is part of
Philips Respironics Asia Pacific
Royal Philips Electronics
+65 6882 5282
How to reach us
Philips Respironics Australia
www.philips.com/healthcare
+61 (2) 9666 4444
[email protected]
Circuit Tubing
Philips Respironics China
Asia
+86 021 24127311
+49 7031 463 2254
Philips Respironics Deutschland
Europe, Middle East, Africa
Bacteria Filter (optional)
Breathing Circuit Connection
+49 7031 463 2254
+33 2 51 89 36 00
+55 11 2125 0744
Philips Respironics Italy +39 039 203 1
+1 425 487 7000 800 285 5585 (toll free, US only) Philips Respironics
+46 8 120 45 900
+41 6 27 45 17 50
Murrysville, PA 15668
Philips Respironics United Kingdom
Customer Service
+44 800 1300 845
+1 724 387 4000
Disposable Ultra-fine Filter (optional)
Philips Respironics Sweden
Philips Respironics Switzerland
1010 Murry Ridge Lane
Filter Cap
+49 8152 93 06 0 Philips Respironics France
Latin America
North America
Reusable Gray Foam Filter (required)
800 345 6443 (toll free, US only)
www.philips.com/respironics
Philips Respironics International Headquarters +33 1 47 28 30 82
Jumper Cord
Respironics, Harmony, BiPAP, Bi-Flex are trademarks of Respironics, Inc. and its affiliates.
Power Supply
Please visit www.philips.com/respironics Power Cord
AC Extention Cable
BiPAP Harmony
© 2011 Koninklijke Philips Electronics N.V. All rights are reserved. Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. Broudy AE 1/31/11 MCI 4103854 PN 1081141
Quick set-up guide
Integrated Leak Patient Interface
Philips Healthcare is part of
Philips Respironics Asia Pacific
Royal Philips Electronics
+65 6882 5282
How to reach us
Philips Respironics Australia
www.philips.com/healthcare
+61 (2) 9666 4444
[email protected]
Circuit Tubing
Philips Respironics China
Asia
+86 021 24127311
+49 7031 463 2254
Philips Respironics Deutschland
Europe, Middle East, Africa
Bacteria Filter (optional)
Breathing Circuit Connection
+49 7031 463 2254
+33 2 51 89 36 00
+55 11 2125 0744
Philips Respironics Italy +39 039 203 1
+1 425 487 7000 800 285 5585 (toll free, US only) Philips Respironics
+46 8 120 45 900
+41 6 27 45 17 50
Murrysville, PA 15668
Philips Respironics United Kingdom
Customer Service
+44 800 1300 845
+1 724 387 4000
Disposable Ultra-fine Filter (optional)
Philips Respironics Sweden
Philips Respironics Switzerland
1010 Murry Ridge Lane
Filter Cap
+49 8152 93 06 0 Philips Respironics France
Latin America
North America
Reusable Gray Foam Filter (required)
800 345 6443 (toll free, US only)
www.philips.com/respironics
Philips Respironics International Headquarters +33 1 47 28 30 82
Jumper Cord
Respironics, Harmony, BiPAP, Bi-Flex are trademarks of Respironics, Inc. and its affiliates.
Power Supply
Please visit www.philips.com/respironics Power Cord
AC Extention Cable
BiPAP Harmony
© 2011 Koninklijke Philips Electronics N.V. All rights are reserved. Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. Broudy AE 1/31/11 MCI 4103854 PN 1081141
Quick set-up guide
