[PDF]quick start guide - Rackcdn.comhttps://3e7777c294b9bcaa5486-bc95634e606bab3d0a267a5a7901c44d.ssl.cf2.rackc...
32 downloads
228 Views
957KB Size
QUICK START GUIDE
WHAT’S IN THE BOX • Lambda Studio™ Recording Interface PHONE:
(801) 566-8800
WEB:
lexiconpro.com
SUPPORT:
lexiconpro.com/en-US/support
• Cubase® LE & Lexicon® MPX-i Plug-in License Card • USB Cable
PRODUCT REGISTRATION Lambda Quick Start Guide PN: 5058915-A
Register your product at http://lexiconpro.com/en-US/support/warranty_ registration or scan the code to the right with a QR scanner app on your mobile device.
DOWNLOAD MANUAL & INSTALL GUIDE © 2016 Harman. All rights reserved. Lexicon is a registered trademark of Harman.
Get the Owner’s Manual and Software Installation Guide at http:// lexiconpro.com/en-US/products/lambda#documentation or scan the code to the right with a QR scanner app on your mobile device.
1
RECORDING USING THE LINE & MIDI INPUTS
MAKE CONNECTIONS
A. Set all of the Lambda’s knobs fully counter-clockwise — with the exception of the Monitor Mix knob, set it to the 12 o’clock position. B. Connect the Lambda to your computer’s USB port then make all other connections per your application. See the connection diagrams to the right for reference.
Mic 1
Mic 2
Peak
Mic 1
Peak
Peak
Monitor Stereo
Mono
Line 2
Peak
Line 1
Peak
Stereo
Output Level
Monitor Mix
Stereo
Mono
Clip -6
Clip
-20
-6
-40
-20
Instrument
-40
2
Output Level
Playback
Playback
Instrument
Peak
Monitor
Mono
Direct
Direct
Line 2
Mono
Peak
Monitor
Monitor Mix
Peak
Monitor
Stereo
Line 1
Mic 2
USB
USB
+48V
+48V
DOWNLOAD & INSTALL THE WINDOWS® USB DRIVER
Line In
2
1
Insert
2
Lambda Studio is a trademark of Lexicon Pro, Inc.
A. If using a Windows computer, download the Lambda USB driver from http://lexiconpro. com/en-US/products/lambda#documentation.
1
B. Close any running software programs then launch the Lambda Driver Installer and follow the on-screen instructions to install it.
Mic 1
Mic 2
L
R
Line Out +48 V
In
NOTE: If using a Mac® computer, the Lambda will use the CoreAudio driver that was already installed with OS X, so no additional driver installation is necessary.
3
DOWNLOAD & INSTALL CUBASE® LE & THE REVERB PLUG-IN
A. Go to https://www.steinberg.net/en/mysteinberg/my_products.html and create or log into your MySteinberg account. B. Enter the Cubase LE download access code from the included license card then follow the on-screen instructions to register, download, install, and authorize Cubase LE. C. To download the Lexicon MPX-i reverb plug-in, follow the instructions provided on the included license card. D. Launch the Lexicon MPX-i Plug-in Installer and follow the on-screen installation and authorization instructions.
MIDI Out
RECORDING USING THE MIC & INSTRUMENT INPUTS Mic 1
Peak
Line 1
Peak
Mic 2
Peak
Line 2
Peak
Monitor Stereo
Mono
Monitor
Monitor Mix
Direct
Stereo
Mono
Output Level
Playback Clip -6 -20 -40
Instrument
USB
+48V
TIP: For additional information on software installation, refer to the Software Installation Guide available at http://lexiconpro.com/en-US/products/lambda#documentation.
SET RECORDING & MONITORING LEVELS
A. If you are recording a mic and monitoring through studio monitors in the same room, turn them down or off and use headphones to avoid bleed and feedback.
Line In
2
1
Insert
2
Lambda Studio is a trademark of Lexicon Pro, Inc.
4
1
Mic 2
B. Set the Output Level knob to the 9 o’clock position. C. Press the Monitor button(s) to select the monitor mode(s) for your application. D. With signal present, gradually increase the channel’s gain (Mic 1, Mic 2, Line 1, or Line 2) knob until the channel’s Peak LED just begins to light occasionally without distortion. If necessary, re-adjust the Output Level knob for the desired monitoring level. Repeat this step for other channels if applicable.
Mic 1
L
R
Line Out +48 V
In MIDI Out
NOTE: When connecting to the Instrument input, the LINE 1 input will be deactivated.