Quick Start Guide


[PDF]Quick Start Guide - Rackcdn.comhttps://3e7777c294b9bcaa5486-bc95634e606bab3d0a267a5a7901c44d.ssl.cf2.rackc...

0 downloads 454 Views 483KB Size

Quick Start Guide WHAT’S IN THE BOX

PRODUCT REGISTRATION

DOWNLOAD THE OWNER’S MANUAL

• AFS2 Processor

To activate your warranty and stay informed on important product updates, please register your product at www. dbxpro.com.

In our effort to be more environmentally responsible and provide the most up-to-date product information, owner’s manuals can now be downloaded online at www.dbxpro. com.

• Power Cable

1

3

MAKE CONNECTIONS With your system powered down, make connections to the AFS2. See the reverse side of this Quick Start Guide for reference connection diagrams and application notes.

Apply power to the AFS2 and your system. Make sure to turn your amplifiers or powered speakers on last.

SEE REVERSE SIDE FOR CONNECTION DIAGRAMS

2

APPLY POWER

CONNECT INCLUDED IEC POWER CABLE

4

SET THE OPERATING LEVEL SWITCHES Set the +4/-10 switches on the back panel of the AFS2 to match the nominal operating level of your mixer. If you’re not sure what the operating level is on the connectors on your mixer, check the mixer’s manual.

RUN THE WIZARD Connect all your mics and perform a sound check then press the WIZARD button and follow the on-screen instructions. PRESS TO BEGIN

TURN & PRESS TO MAKE ON-SCREEN SELECTIONS © 2014 Harman. dbx Professional Products is a registered trademark of Harman. All rights reserved.

CONNECTION DIAGRAMS CONNECTED TO MIXER CHANNEL INSERTS

CONNECTED TO MIXER BUS INSERTS

Use this configuration to independently protect two single microphones from feedback, while leaving all other audio channels unaffected.

Use this configuration to protect two independent groups of microphones from feedback, while leaving all other audio channels unaffected.

Left Main Powered Speaker

Right Main Powered Speaker

Return

To Power Outlet

Return

Right Main Powered Speaker

Return

Send

Insert Cable

Send

Left Main Powered Speaker

To Power Outlet

Insert Cable Ch. 1 Insert

Ch. 2 Insert

Return

Send

Insert Cable

Send

Insert Cable Bus 1 Insert

L Main R Main Out Out

Bus 2 Insert

Mixer

Mixer

Left Main Powered Speaker

CONNECTED TO MIXER MASTER INSERTS

CONNECTED IN-LINE BETWEEN MIXER AND AMPS

Use this configuration to protect the entire system from feedback. Your mixer must have master insert connections to use this configuration. This places the AFS2 before the master fader so that it can work optimally no matter where the master fader is set. If you have a system EQ, you can place it before or after the AFS2 in the chain.

Use this configuration to protect the entire system from feedback when your mixer doesn’t have master insert connections. If you have a system EQ, you can place it before or after the AFS2 in the chain.

Return

To Power Outlet

Return

Right Main Powered Speaker

Left Main Powered Speaker

Right Main Powered Speaker

Send

Insert Cable

Send

L Main R Main Out Out

To Power Outlet

Insert Cable R Main Insert

L Main Insert

L Main R Main Out Out

L Main R Main Out Out

Insert Cable Diagram Ground Tip + (Send) Ground To Mixer Insert

Tip +

To Input Tip +

Tip / Send

Mixer

Mixer

Ground To Output

Ring + (Return)

Ring +

Ring / Return Ground - Ring +

dbx Professional Products

• 801.566.8800

• dbxpro.com

AFS2 Quick Start Guide PN: 5040506-B