R282D&R162D+L(issue 1)


[PDF]R282D&R162D+L(issue 1) - Rackcdn.comhttps://04646a9cf351cc0d3888-b8b406d15fe93f790abb5bf0e9ab7ab3.ssl.cf3.rackcd...

4 downloads 114 Views 811KB Size

2D GOLF surface fittings R162D+L, R282D+L Please read instructions before commencing installation and retain for future reference.

incl.

Specification: IP65 2D fitting with ABS trim and PC lens for surface mounting. 16W and 28W types with polycarbonate base Protection against electric shock: Class 1: must be earthed R162D+L R282D+L Lamp type: 16W 4 pin 2D 28W 4 pin 2D Diameter: 272mm 330mm Depth:

90mm

Supply:

230/240V 50Hz 0.2A -20°C< ta < +40°C

Temperature range:

118mm 0.32A

Suitable for mounting on normally flammable surface Minimum distance from illuminated object is 0.5 metre Ingress protection: IP65 dust and splash proof Complies with EN60598 -1(BS4533),EN61347-2-3,EN55015, EN61000-3-2,EN61000-3-3.

Installation:

!Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician. 1 2 3 4 5 6

Ensure mains supply is switched off Ensure there is at least 100mm of free space around the luminaire location Check location of buried wires before drilling fixing holes Connect supply cables Live, Neutral and Earth to fitting terminals Refit reflector plate. Note: If plate is not correctly aligned with screws fully home, the lamp might not engage lampholder satisfactorily Lamp installation and replacement:

!Ensure mains supply is off. !When operating the lamp is too hot to touch. Switch off and allow to cool before undertaking any maintenance work.

Information for the Product user 1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol). 2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement. 3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain 4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations

The Installation must be carried out by an electrician LED Group Western Retail Park Nangor Road Dublin 12 Ireland Issue 1 150110

Tel: +353 1 7099000 Fax: +353 1 7099060 Email: [email protected] Website: www.led.ie

ISO 9001:2008

Q UAL IT Y ASSU RE D CO MPANY

Page 1

Installation diagram:

+L

+L

+L

+L

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

The Installation must be carried out by an electrician LED Group Western Retail Park Nangor Road Dublin 12 Ireland

Tel: +353 1 7099000 Fax: +353 1 7099060 Email: [email protected] Website: www.led.ie

ISO 9001:2008

Q UAL IT Y ASSU RE D CO MPANY

Page 2