rubber compounds available

---

1-800-338-1382

Material Flow & Conveyor Systems

B elTWall c orrugaTeD s iDeWall B elTing ®

Beltwall is one of the world’s leading producers of cross-rigid corrugated sidewall belting. Beltwall has an outstanding record of successful bulk handling installations worldwide. Three factors contribute to Beltwall’s superior performance on high-lift systems: 1. Beltwall’s unique combination of two cross-rigid plies and special high-strength rubber create the most cross-rigid base belt available. 2. Beltwall’s sidewall construction of fiber-loaded compounds keeps incidental cuts or tears from propagating. 3. Beltwall’s urethane cleats bolted into cleat bases that are vulcanized to the base belt are more durable than rubber cleats of similar size. All Beltwall cleats are hot-vulcanized onto the base belt to ensure the highest adhesion levels possible. Beltwall offers the widest variety of corrugated sidewalls in the industry – from 1" through 16" – with metric sizes readily available. Sizes above 5" are reinforced with a specially woven fabric ply to provide exceptional strength and performance. BASIC CONFIGURATIONS Beltwall belts carry material in any plane from horizontal to vertical. The most common conveyor shapes include straight incline, “L,” and “S” shapes but almost any configuration is possible. CONSTRUCTIONS Each Beltwall belt consists of two corrugated sidewalls bonded to a cross-rigid base belt. The walls can be recessed for clearance and belt support through bend sections. Beltwall offers three distinct cleat profiles to provide optimal capacity at any angle. White food grade Beltwall belts are available with sidewalls from 1" to 5". These belts are acceptable for most applications governed by FDA regulations.

All Beltwall products are packaged to ensure they arrive in “factory new” condition, whether shipped across the state, country, or world.

RUBBER COMPOUNDS AVAILABLE Black Standard

Black High Oil Resistant

Black Moderately Oil Resistant

Black Flame Retardant

Black High Heat Resistant

White Oil and Fat Resistant (FDA)

1-800-338-1382

Material Flow & Conveyor Systems

B elTWall F racWall B elTs HEAVY DUTY FRACWALL BELTS The growth of the frac sand industry has resulted in numerous OEMs entering the market to provide frac sand delivery vehicles. Each has a slightly different approach but most involve the use of sidewall belts. BELTWALL FRACWALL MAJOR FEATURES: • Heavy duty, abrasion resistant rubber base belts available in cross-rigid and non-cross rigid multi-ply construction. The lateral rigidity of the cross rigid belts allows for the ability to negotiate upturn and downturn transition bends on the conveyor. • The corrugated sidewalls are constructed of fiber-loaded compounds (exclusive to Beltwall) to mitigate the propagation of cuts and tears. The sidewalls are available in a variety of heights and are attached to the base belt via cold or hot bond. • Cleats and profiles are hot vulcanized onto the base belt to ensure the highest adhesion levels possible.

• With over 300 belt specifications stocked, a wide variety of base belts are available. The most common are heavy duty 2-ply 220 PIW 3/16" x 1/16" and cross-rigid 4-ply 220 PIW 3/16" x 1/16". • A variety of end preparations are available to facilitate easy installation at the jobsite.

BELTWALL CUSTOM FRACWALL FABRICATIONS: • For new applications, contact Material Flow. Let us put our years of experience to work in deriving the best, most cost competitive design. • For existing applications where the current belt does not meet the operational requirements, we can provide alternative suggestions.

THE MOST COMMON REPLACEMENT BELTS ARE READILY AVAILABLE: A.

B.

A. Sidewall Only • Belt: 2-ply 220 PIW Black Standard, 3/16” x 1/16” • Widths: 24”, 30”, and 36” • Sidewall: 2-1/2” or 3” tall and flush to belt edge • Min. pulley diameter 10” • Stocked: 24” wide with 2-1/2” and 3" wall B. HD Steepclimb • Belt: 4-ply 220 PIW Black Standard cross rigid, 3/16” x 1/16” • Widths: 24”, 30”, and 36” • Sidewall: 3” or 4” tall and recessed from belt edge • Min. pulley diameter 12” • Stocked: 24”, 30”, and 36” wide with 3” wall recessed (call for dimensions)

C. C. I-Cleat • Belt: 4-ply 220 PIW Black Standard cross rigid, 3/16” x 1/16” • Widths: 24”, 30”, and 36” • Sidewall: 3” or 4” tall and recessed from belt edge • Min. pulley diameter: 10” D.

D. HD Nub Belt • Belt: 2-ply 220 PIW Black Standard, 3/16” x 1/16” • Widths: 24”, 30”, and 36” • Sidewall: 3” tall and hot bonded to belt edge • Min. pulley diameter 10” • Stocked: 24”, 30“, and 36” wide with 3” wall flush to belt edge

Material Flow & Conveyor Systems

1-800-338-1382

B eltwall C orrugated S idewall B elting DESIGN INFORMATION DATA SHEET Customer: Address: City/State/Zip: Reference: Customer Class: User

OEM

Dist

Date: Contact: E-Mail: Phone: ( Fax: (

Sales Territory:

) )

- Ê ",
/" ʇ‡Ê
Ê /Material:

Max. Temperature:

Required Capacity:

Oily Condition?

(STPH)

Density:

(lbs./cu.ft.)

Lump Size:

Min.

No %

Moisture?

°

Angle of Surcharge:

Yes

Belt Width Preference?

Max.

Belt Speed Preference?

" 1,
/"

c




c



1, ʣ



1, ÊÓ




1, Ê "°

1, ÊÎ





c








1, Ê{



c




1, Êx





°

8-/ Ê / ,

-7

7

-7

,



7

i>ÌÊ/Þ«ià ¸I ¸

¸ ¸

¸-¸

Belt Length

Belt Type

Belt Width (BW)

Covers

Sidewall Height (H)

Cleat Height (C)

Sidewall Recess (R)

Cleat Type

Sidewall Width (SW)

Cleat Spacing

Effective Width (EW)

Pulley Dia.

Belt Speed

End Prep.

"/ -\

7ÀˆÌÌi˜ÊÕ«ÊLÞ\

Photocopy, complete and FAX to: (503)684-5133 or email: [email protected]