S-8829 - The Mine

---

SPEAKMAN

400 Anchor Mill Rd., New Castle, DE 19720, USA 800-537-2107 | Fax: 800-977-2747 www.speakmancompany.com

®

Sensorflo

®

S-8829

AC Powered Manual Override Lavatory Faucet with Above-Counter Mixer GENERAL SPECIFICATION

Polished chrome plated. Above counter hot/cold mixer with built-in check valves and temperature limit stop. Ceramic manual override valve activates the faucet for continuous operation in the event of power outage or user preference. Solenoid with built-in filter. Includes hoses needed to make mixer and manual override connections. UL/CSA approved transformer 120 VAC to 12 DC with water proof connectors. Spout consists of all metal chassis and removable cover. Vandal resistant 60-second time out feature. Water conserving vandal-resistant flow control reduces flow to 2.2 gpm/8.4 lpm. To meet existing ASME A112.18.1/CSA B125.1 standard. Two supply hoses not included. NOTE: Stainless steel flexible supply hoses, 3/8” compression, to supply stops not included, see options below. ❑ S-8829 Low profile faucet with 8” deck plate. OPTIONS

SUFFIX ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

DESCRIPTION

ADA ADA handle BO 0.5 gpm flow control, vandal-resistant GB 1.5 gpm flow control, vandal-resistant HS Two (2) stainless steel flexible supply hoses to supply stops LF 2.2 gpm laminar flow control outlet LT Less transformer TMV Under counter thermostatic mixing valve VRS Vandal-resistant screws for removable cover and custom wrench 4WH 4” wrist blade handle on manual override valve

This space for Architect/Engineer approval. Sensorflo — Registered T.M. Speakman Company © Copyright, Speakman Company, 2011

265

SPEAKMAN

400 Anchor Mill Rd., New Castle, DE 19720, USA 800-537-2107 | Fax: 800-977-2747 www.speakmancompany.com

®

Rough-Ins S-8829

S P

K EA M

AN

1-1/2" (38mm) MAXIMUM DECK THICKNESS

SWIVEL CONNECTION ALLOWS 360 ROTATION OF SOLENOID FOR EASE OF INSTALLATION

TRANSFORMER

SPEAKMAN CO. AC ADAPTOR

UL -

+

C SA

SOLENOID REMOVABLE IN-LINE FILTER (100 X 100 STAINLESS STEEL MESH)

266

NOTE: Position faucet as close to the edge of the sink as possible. Ensure adequate clearance for wire protector, wires, washers and nut. Unless otherwise specified, all inlets are 3/8 compression with male threads. Unless otherwise specified, all dimensions are in inches and are subject to change without notice.