Satco S29750 Warranty

---

Warranty The limited warranty set forth below is given by SATCO Products Inc. with respect to certain LED and CFL lighting products (“Product”), when delivered in new condition and in it’s original package, is warranted against defects in material and workmanship for a period of 2 to 5 years (depending upon product type; see below) from the original date of purchase, based on 3 hours of use per day. Defective Products should be returned to SATCO. Contact SATCO to obtain return authorization. Once returned product is proven defective upon inspection by SATCO, product will be repaired or exchanged as determined by SATCO. This limited warranty covers all defects encountered in normal and recommended use of the product, and does not apply to cases below: (A) Loss or damage to the product due to abuse, mishandling, alteration, accident, electrical current fluctuation, failure to follow operating, maintenance or environmental instructions prescribed by SATCO. (B) Service provided by someone other than SATCO or an authorized service provider. (C) Warranty is void if product is not used for the intention which product was manufactured. For Hi-Pro Light Emitting Diode (LED) Bulbs - 5 Year The limited warranty set forth below is given by SATCO Products, Inc. with respect to SATCO Hi-Pro LED products when delivered in new condition and in its original package. This LED lamp is designed to operate on line voltage ranging from 100V to 277V AC. If the fixture contains a ballast, it must be by-passed or removed before this LED lamp is installed. Failure to by-pass or remove the existing ballast could result in damage to the product and will void its warranty. The operating temperature range for the Hi-Pro LED product line is: -20°C (-4°F) to a maximum of +60°C (+140°F) unless otherwise noted on the box. When used in an enclosed fixture, the lamp must be installed in accordance with the recommended compartment size for that lamp. Lamp life may vary depending on application & use. The product is warranted against defects in material and workmanship for 5 years from date of purchase, based on 12 hours per day of use. Defective products should be returned to SATCO after being contacted and a Return Goods Authorization has been obtained. Once returned product is proven defective upon inspection, the product will be repaired or exchanged.