Integrated Leak Patient Interface
Philips Healthcare is part of
Philips Respironics Asia Pacific
Royal Philips Electronics
+65 6882 5282
How to reach us
Philips Respironics Australia
www.philips.com/healthcare
+61 (2) 9666 4444
[email protected]
Circuit Tubing
Philips Respironics China
Asia
+86 021 24127311
+49 7031 463 2254
Philips Respironics Deutschland
Europe, Middle East, Africa
Bacteria Filter (Optional)
Breathing Circuit Connection
+49 7031 463 2254
+33 2 51 89 36 00
+55 11 2125 0744
Philips Respironics Italy +39 039 203 1
+1 425 487 7000 800 285 5585 (toll free, US only) Philips Respironics
+46 8 120 45 900
+41 6 27 45 17 50
Murrysville, PA 15668
Philips Respironics United
Customer Service
Kingdom
+1 724 387 4000
Disposable Ultra-fine Filter (optional)
Philips Respironics Sweden
Philips Respironics Switzerland
1010 Murry Ridge Lane
Filter Cap
+49 8152 93 06 0 Philips Respironics France
Latin America
North America
Reusable Gray Foam Filter (required)
800 345 6443 (toll free, US only) Philips Respironics International
+44 800 1300 845 www.philips.com/respironics
Headquarters +33 1 47 28 30 82
Jumper Cord
Respironics, Synchrony, BiPAP, Bi-Flex, AVAPS are trademarks of Respironics, Inc. and its affiliates
Please visit www.philips.com/respironics
Power Supply
© 2011 Koninklijke Philips Electronics N.V. All rights are reserved.
Power cord
Philips Healthcare reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences
AC Extention Cable
BiPAP Synchrony
resulting from the use of this publication. Broudy AE 1/31/11 MCI 4103823 PN 1081154
Set-up guide
Some definitions IPAP Inspiratory pressure EPAP PEEP = Positive End Expiratory Pressure PS Pressure support = IPAP – EPAP Ti Inspiratory time CPAP Continuous pressure mode S Spontaneous mode S/T Spontaneous mode with back up rate T Pressure control mode Leak Monitoring leak S/T mode
Setting ventilation PC Spontaneous mode with back
> If
up rate and fixed inspiratory
appears on the screen, the machine is unlocked;
go directly to frames
time at each breath
and
.
1) Hold
AVAPS Average Volume Assured
MinVent E xhaled minute ventilation estimation
1. To reach the mode screen, press
T
S
Ti Machine
Ti Patient
Press through the
Press
60 sec. /BPM
t
screens Alarm
Icons Patient apnea alarm
Patient disconnection alarm
Rise time Inspiratory time
Humidifier on Machine unlocked
Reset Button
Press
SmartCard
to go back
Pressure Ramp
Patient time meter
or
.
3. To reach AVAPS screen, press
.
4. To set AVAPS feature, press 5. To reach IPAP screen, press 6. To change IPAP setting, press
or
.
. or
.
Bi-Flex parameter
to the main
Backlight
2. To change the ventilation mode, press
monitoring
on/off button
.
to navigate
EPAP
.
and set to 1 by pressing
Exhaled tidal volume estimation
Vte
PS
Alarm on
several times to reach the unlock screen, “
BPM Breath per minute
S Ti Patient
together for more than 2 seconds.
“0” flash on the screen:
Respiratory rate
Pressure IPAP
and
2) To keep the machine unlocked, press
Pressure Support function RR
> To unlock the machine,
Press
Maximum IPAP setting Minimum IPAP setting
&
to change the setting
Press
&
to
screen
7. To reach the EPAP screen, then the breath rate, the inspiratory time... etc, repeat this key combination. > To come back to the main screen at any time: Press
navigate through the different setting screens (modes, IPAP, EPAP, etc)
> To start ventilation: Press on/off button
” and
