Southco® LP Series Cam Latch Fixed Grip

---

Southco® LP Series Cam Latch Fixed Grip Cam Latches

Stud Part Numbers Wing Head

Slotted Knob

Slotted Head

1.125 Ø.625 .40

LP-137

Material and Finish Stud: Black acetal copolymer Cam: Spring Steel Spacer: Black acetal copolymer

.125

.125

.708

.708

.708

.010˝ to .090

This fastener assembly provides basic quarter-turn operation at low installed cost. The plastic studs are combined with a spring steel cam. The cam is rapidly installed by pushing on to the shaft of the stud. One way tabs on the cam maintain its position and provide secure stud retention during operation.

.085

.375

.256

Grip Range

Ø.625

.085

Ø.625

.256

.256

LP-137-1W

LP-137-1K

LP-137-1

Fastener Selection and Installation 1. Choose a head style with part number from table above. 2. Cam is ordered separately per table below. 3. Difference in thickness between panel and support cannot exceed 3mm (Max Deflection). 4. Spacers (3mm thick) must be used to maintain deflection in range given.

PANEL THICKNESS: .04˝ to .41˝

PAWL DEFLECTION .010˝ to .090˝ .79˝ ø.315˝ INSTALLATION HOLE

Mechanical Panel Thickness Range: .04˝ to .41˝ Recommended Cam Deflection: .010˝ (locked tension 2 lbs.) to .090˝ (locked tension 6 lbs.) Rating: UL94HB flammability

Cam LP-137-3

.51˝

.55˝

.43˝

.79˝ TAB FOR CORRECT ORIENTATION ON KNOB

0.0˝

LP137-2S CAM

0˝

OFFSET

CAM PART NUMBER

0”

LP-137-2S

.115”

LP-137-2L

LP-137-2S .115˝

All dimensions on this page are in inches.

PAWL SPACER PART NUMBER LP-137-3

42

LP-137-2L

Refer to our Southco 2003 Handbook or visit www.southco.com for expanded product listings.