tor reduces flow to 2.2 gpm/8.4 lpm. Copper tube inlets with 1/2" NPSM compression threads. Meets ASME A112.18.1/CSA B125.1 and NSF 61 standards. â ...
0 downloads
126 Views
500KB Size
SPEAKMAN
400 Anchor Mill Rd., New Castle, DE 19720, USA 800-537-2107 | Fax: 800-977-2747 www.speakmancompany.com
®
Single Lever Faucet S-3552 S-3562-LD
GENERAL SPECIFICATION
Polished chrome plated, NSF compliant, 4” centerset single lever faucet. All metal shell and belly plate. Ceramic cartridge. Water conserving aerator reduces flow to 2.2 gpm/8.4 lpm. Copper tube inlets with 1/2" NPSM compression threads. Meets ASME A112.18.1/CSA B125.1 and NSF 61 standards. ❑ S-3552 4” centerset single lever faucet with 1-1/4" pop-up drain. ❑ S-3562-LD 4” centerset single lever faucet. No drain assembly. OPTIONS
SUFFIX ❑ ❑ ❑ ❑ ❑
BO CA** GB LF VR
DESCRIPTION 0.5 gpm flow control, vandal-resistant No lead for CA AB1953 compliance 1.5 gpm flow control, vandal-resistant 2.2 gpm laminar flow control outlet, vandal resistant 2.2 aerated flow control, vandal-resistant
** The following options are not available with the “CA” option: HS (Hose & Spray), SO, TWI, VB6, VB8, ST, SW, & TMV.
This space for Architect/Engineer approval. © Copyright, Speakman Company, 2011
331
SPEAKMAN
400 Anchor Mill Rd., New Castle, DE 19720, USA 800-537-2107 | Fax: 800-977-2747 www.speakmancompany.com
®
Rough-Ins S-3552 10°
6-7/16" (164mm)
6-1/4" (158mm)
Pop-Up Drain
6" (152mm)
4-1/2" (114mm)
3-1/4" (83mm)
1" MAX (25mm)
HOLD DOWN HARDWARE NOT SHOWN
NUTS NOT SHOWN 3-5/8" (92mm) 4-3/4" (121mm)
2-1/8" DIA (54mm)
S-3552 S-3562-LD
1-1/8" DIA. MIN. (28mm) 3-1/2" (89mm)
S-3562-LD 2" MAX (51mm)
1" DIA. MIN. (25mm) 4" (102mm)
NOTES: 1. ALL DIMENSIONS ARE IN INCHES (MIL LIMETERS) UNLESS OTHERWISE SPECIFIED AND ARE SUBJECT TO CHANGE WITHOUT NOTICE. 2. INLETS ARE SIZED FOR COUPLING CONNECTIONS.
332
2" MAX (51mm)
8-1/2" (216mm)
1-1/4" DIA (32mm)
02/07 92-2811 S-3552
NOTE: All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. Lavatory inlets are sized for coupling connections. Unless otherwise specified, all inlets are 1/2" NPSM.